Mini SIP FAST TTL Logic Delay Line The Mini SIP FAST TTL Logic Delay Lines manufactured by Engineered Components Company are designed to provide an output waveform that reproduces the input waveform after a set amount of delay time has elapsed. These delay lines are non-inverting. The delay times are calibrated to the listed tolerances on the rising edge delays. The MTBF on these modules, when calculated per MIL-HDBK-217, for a 50 deg.C ground fixed environment and with 50VDC applied, is in excess of 3 million hours. The temperature coefficient of delay is less than 1200 ppm/deg.C over the operating temperature range of 0 to +70 deg. C. The module is provided in a 5-pin SIP package, fully encapsulated in epoxy resin and is housed in a Diallyl Phthalate case, blue in color. The case marking is applied by silkscreen using white epoxy paint. The 4 beryllium copper leads are tin-lead plated and meet the solderability requirements of MIL-STD-202, Method 208. BLOCK DIAGRAM V 1 IN 2 MECHANICAL DIAGRAM .480 Input Buffer Delay Line Output Buffer 4 OUT .190 V IN OUT C engineered components co. 5 .350 C MSFLDLTTL-20 YYWW Top view DATE CODE .030 +/-.020 .130 Product Selection Table Part Output Delay and Number Tolerance (in ns) Product Selection Table (Cont.) Part Output Delay and Number Tolerance (in ns) MSFLDL-TTL-5 MSFLDL-TTL-6 MSFLDL-TTL-7 MSFLDL-TTL-8 MSFLDL-TTL-9 MSFLDL-TTL-10 MSFLDL-TTL-11 MSFLDL-TTL-12 MSFLDL-TTL-13 MSFLDL-TTL-14 MSFLDL-TTL-15 MSFLDL-TTL-16 MSFLDL-TTL-17 MSFLDL-TTL-18 MSFLDL-TTL-19 MSFLDL-TTL-20 MSFLDL-TTL-21 MSFLDL-TTL-22 MSFLDL-TTL-23 MSFLDL-TTL-24 MSFLDL-TTL-25 MSFLDL-TTL-30 MSFLDL-TTL-35 MSFLDL-TTL-40 MSFLDL-TTL-45 MSFLDL-TTL-50 MSFLDL-TTL-55 MSFLDL-TTL-60 MSFLDL-TTL-65 MSFLDL-TTL-70 MSFLDL-TTL-75 MSFLDL-TTL-80 MSFLDL-TTL-85 MSFLDL-TTL-90 MSFLDL-TTL-95 MSFLDL-TTL-100 MSFLDL-TTL-125 MSFLDL-TTL-150 MSFLDL-TTL-175 MSFLDL-TTL-200 MSFLDL-TTL-225 MSFLDL-TTL-250 MSFLDL-TTL-275 MSFLDL-TTL-300 MSFLDL-TTL-350 MSFLDL-TTL-400 MSFLDL-TTL-450 MSFLDL-TTL-500 5.0+/-1.0 6.0+/-1.0 7.0+/-1.0 8.0+/-1.0 9.0+/-1.0 10.0+/-1.0 11.0+/-1.0 12.0+/-1.0 13.0+/-1.0 14.0+/-1.0 15.0+/-1.0 16.0+/-1.0 17.0+/-1.0 18.0+/-1.0 19.0+/-1.0 20.0+/-1.0 21.0+/-1.0 22.0+/-1.0 23.0+/-1.0 24.0+/-1.0 25.0+/-1.0 30.0+/-1.5 35.0+/-1.5 40.0+/-1.5 45.0+/-2.0 50.0+/-2.0 55.0+/-2.0 60.0+/-2.0 65.0+/-2.5 70.0+/-2.5 75.0+/-2.5 80.0+/-2.5 85.0+/-3.0 90.0+/-3.0 95.0+/-3.0 100.0+/-3.0 125.0+/-4.0 150.0+/-4.5 175.0+/-5.0 200.0+/-6.0 225.0+/-7.0 250.0+/-8.0 275.0+/-9.0 300.0+/-10.0 350.0+/-11.0 400.0+/-12.0 450.0+/-14.0 500.0+/-15.0 Special modules can often be manufactured to provide for customer specific applications. .018 .200 TYP. .100 TYP. .060 TYP. .010 Operating Specifications: All measurements made at 25 deg. C All measurements made with Vcc = +5VDC All measurements made with (1) FAST TTL output load Operating Temperature: 0 to +70 deg. C Storage Temperature: -55 to +125 deg. C Vcc Supply Voltage: 4.75 to 5.25VDC Vcc Supply Current: Constant "0" in = 60mA typical Constant "1" in = 7mA typical Logic "High" Input: Voltage: 2.0VDC min. ; Vcc max. Current: 2.7VDC = 20uA max. ; 5.5VDC = 1mA max. Logic "Low" Input: Voltage: 0.8 VDC max. Current: -0.6mA max. Logic "High" Voltage Out: 2.7VDC min. Logic "Low" Voltage Out: 0.5VDC max. engineered components company A Division of Cornucopia Tool & Plastics, Inc. PO Box 1915, 448 Sherwood Rd., Paso Robles CA 93447 Phone: 805-369-0034 Fax: 805-369-0033 Web: www.ec2.com