Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Overview KEMET's Automotive Grade High Voltage surface mount MLCCs in C0G dielectric feature a 125C maximum operating temperature and are considered "stable." The Electronics Industries Alliance (EIA) characterizes C0G dielectric as a Class I material. Components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required. C0G exhibits no change in capacitance with respect to time and voltage and boasts a negligible change in capacitance with reference to ambient temperature. Capacitance change is limited to 30ppm/C from -55C to +125C. military, aerospace, semiconductors and test/diagnostic equipment. Whether under-hood or in-cabin, these capacitors are designed to provide reliable performance in mission and safety critical automotive circuits. Stricter testing protocol and inspection criteria have been established for automotive grade products in recognition of potentially harsh environmental conditions. KEMET automotive grade series capacitors meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements. These devices exhibit low ESR at high frequencies and find conventional use as snubbers or filters in applications such as switching power supplies and lighting ballasts. Their exceptional performance at high frequencies has made high voltage MLCC's the preferred dielectric choice of design engineers worldwide. In addition to their use in power supplies, these capacitors are widely used in industries related to automotive(hybrid), telecommunications, medical, Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Ordering Information C Ceramic 1210 2 332 Case Size Specification/ Capacitance (L" x W") Series Code (pF) 0603 0805 1206 1210 1808 1812 1825 2220 2225 2824 3040 3640 4540 1 C C = Standard Two significant digits and number of zeros. J C G A C AUTO Capacitance Tolerance1 Rated Voltage (VDC) Dielectric Failure Rate/ Design Termination Finish2 Packaging/Grade (C-Spec) B = 0.10 pF C = 0.25 pF D = 0.5 pF F = 1% G = 2% J = 5% K = 10% M = 20% C = 500 B = 630 D = 1,000 F = 1,500 G = 2,000 Z = 2,500 H = 3,000 G = C0G A = N/A C = 100% Matte Sn See "Packaging C-Spec Ordering Options Table" Additional capacitance tolerance offerings may be available. Contact KEMET for details. Additional termination finish options may be available. Contact KEMET for details. One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 1 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Packaging C-Spec Ordering Options Table Packaging/Grade Ordering Code (C-Spec)3 Packaging Type1 7" Reel 13" Reel/Unmarked 7" Reel/Unmarked/2 mm pitch2 13" Reel/Unmarked/2 mm pitch2 AUTO AUTO7411 (EIA 0603 and smaller case sizes) AUTO7210 (EIA 0805 and larger case sizes) 3190 3191 Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L" x W") and thickness dimension. See "Chip Thickness/Tape & Reel Packaging Quantities" and "Tape & Reel Packaging Information". 2 The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information". 3 All Automotive packaging C-Specs listed exclude the option to laser mark components. Please contact KEMET if you require a laser marked option. For more information see "Capacitor Marking". 3 For additional Information regarding "AUTO" C-Spec options, see "Automotive C-Spec Information." 1 Benefits * * * * * * * * * AEC-Q200 automotive qualified Operating temperature range of -55C to +125C Lead (Pb)-free, RoHS and REACH compliant EIA 0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225, 2824, 3040, 3640 and 4540 case sizes DC voltage ratings of 500 V, 630 V, 1 KV, 1.5 KV, 2 KV, 2.5 KV and 3 KV Capacitance offerings ranging from 1pF to 0.150F Available capacitance tolerances of 0.10pF, 0.25pF, 0.5pF, 1%, 2%, 5%, 10% and 20% No piezoelectric noise Extremely low ESR and ESL * High thermal stability * High ripple current capability * Preferred capacitance solution at line frequencies and into the MHz range * No capacitance change with respect to applied rated DC voltage * Negligible capacitance change with respect to temperature from -55C to +125C * No capacitance decay with time * Non-polar device, minimizing installation concerns * 100% pure matte tin-plated termination finish allowing for excellent solderability Applications Typical applications include switch mode power supplies (input filters, resonators, tank circuits, snubbed circuits, output filters), high voltage coupling and DC blocking, lighting ballasts, voltage multiplier circuits, DC/DC converters and coupling capacitors in uk converters. Markets include power supply, LCD fluorescent backlight ballasts, HID lighting, telecom equipment, industrial and medical equipment/control, LAN/WAN interface, analog and digital modems, and automotive. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 2 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Automotive C-Spec Information KEMET automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval Process warrant (PPAP). Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, "AUTO." This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade component without the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET OEM automotive customers and are not granted the same "privileges" as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited (see details below.) Product Change Notification (PCN) The KEMET product change notification system is used to communicate primarily the following types of changes: * Product/process changes that affect product form, fit, function, and/or reliability * Changes in manufacturing site * Product obsolescence Process/Product change Obsolescence* Days Prior To Implementation KEMET assigned Yes (with approval and sign off) Yes 180 days minimum AUTO Yes (without approval) Yes 90 days minimum 1 1 Customer Notification Due To: KEMET Automotive C-Spec KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. Production Part Approval Process (PPAP) The purpose of the Production Part Approval Process is: * To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts. * To provide the evidence that all customer engineering design records and specification requirements are properly understood and fulfilled by the manufacturing organization. * To demonstrate that the established manufacturing process has the potential to produce the part. 1 PPAP (Product Part Approval Process) Level KEMET Automotive C-Spec 1 2 3 4 5 KEMET assigned1 AUTO KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET. Part number specific PPAP available Product family PPAP only (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 3 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Dimensions - Millimeters (Inches) L W B T S EIA Size Code Metric Size Code 0603 1608 0805 2012 1206 3216 1210 3225 1808 4520 1812 4532 1825 4564 2220 5650 2225 5664 2824 7260 3040 7610 3640 9210 4540 - L Length W Width 1.60 (0.063) 0.15 (0.006) 2.00 (0.079) 0.20 (0.008) 3.20 (0.126) 0.20 (0.008) 3.20 (0.126) 0.20 (0.008) 4.70 (0.185) 0.50 (0.020) 4.50 (0.177) 0.30 (0.012) 4.50 (0.177) 0.30 (.012) 5.70 (0.224) 0.40 (0.016) 5.60 (0.220) 0.40 (0.016) 7.10 (0.280) 0.40 (0.016) 7.60 (0.300) 0.40 (0.016) 9.10 (0.358) 0.40 (0.016) 11.40 (0.449) 0.40 (0.016) 0.80 (0.032) 0.15 (0.006) 1.25 (0.049) 0.20 (0.008) 1.60 (0.063) 0.20 (0.008) 2.50 (0.098) 0.20 (0.008) 2.00 (0.079) 0.20 (0.008) 3.20 (0.126) 0.30 (0.012) 6.40 (0.252) 0.40 (0.016) 5.00 (0.197) 0.40 (0.016) 6.40 (0.248) 0.40 (0.016) 6.10 (0.240) 0.40 (0.016) 10.20 (0.402) 0.40 (0.016) 10.20 (0.402) 0.40 (0.016) 10.20 (0.402) 0.40 (0.016) T Thickness B Bandwidth See Table 2 for Thickness 0.35 (0.014) 0.15 (0.006) 0.50 (0.02) 0.25 (0.010) 0.50 (0.02) 0.25 (0.010) 0.50 (0.02) 0.25 (0.010) 0.60 (0.024) 0.35 (0.014) 0.60 (0.024) 0.35 (0.014) 0.60 (0.024) 0.35 (0.014) 0.60 (0.024) 0.35 (0.014) 0.60 (0.024) 0.35 (0.014) 1.27 (0.050) 0.40 (0.016) 1.27 (0.050) 0.40 (0.016) 1.27 (0.050) 0.40 (0.016) 1.27 (0.050) 0.40 (0.016) (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com S Separation Minimum Mounting Technique 0.70 (0.028) 0.75 (0.030) N/A Solder Wave or Solder Reflow Solder Reflow Only C1080_C0G_HV_AUTO_SMD * 6/11/2018 4 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Qualification/Certification Automotive Grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit their website at www.aecouncil.com. Environmental Compliance Lead (Pb)-free, RoHS, and REACH compliant without exemptions. Electrical Parameters/Characteristics Item Parameters/Characteristics Operating Temperature Range Capacitance Change with Reference to +25C and 0 VDC Applied (TCC) Aging Rate (Maximum % Capacitance Loss/Decade Hour) Dielectric Withstanding Voltage (DWV) 1 2 Dissipation Factor (DF) Maximum Limit at 25C 3 Insulation Resistance (IR) Limit at 25C -55C to +125C 30 ppm/C 0% See Dielectric Withstanding Voltage (DWV) Table (5 1 seconds and charge/discharge not exceeding 50 mA) 0.1% 1,000 megohm microfarads or 100 G (500 VDC applied for 120 5 seconds at 25C) DWV is the voltage a capacitor can withstand (survive) for a short period of time. It exceeds the nominal and continuous working voltage of the capacitor. 2 Capacitance and dissipation factor (DF) measured under the following conditions: 1 MHz 100 kHz and 1.0 Vrms 0.2 V if capacitance 1,000 pF 1 kHz 50 Hz and 1.0 Vrms 0.2 V if capacitance > 1,000 pF 3 To obtain IR limit, divide M-F value by the capacitance and compare to G limit. Select the lower of the two limits. Note: When measuring capacitance it is important to ensure the set voltage level is held constant. The HP4284 and Agilent E4980 have a feature known as Automatic Level Control (ALC). The ALC feature should be switched to "ON." 1 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 5 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Dielectric Withstanding Voltage (DWV) EIA Case Size 500V 630V 150% of rated voltage < 620pF 150% of rated voltage 620pF 130% of rated voltage < 5.1nF 150% of rated voltage 5.1nF 130% of rated voltage < 7.5nF 150% of rated voltage 7.5nF 130% of rated voltage < 5.1nF 150% of rated voltage 5.1nF 130% of rated voltage < 12nF 150% of rated voltage 12nF 130% of rated voltage 0603 130% of rated voltage 0805 1206 1210 1000V 1808 1812 1825 120% of rated voltage 150% of rated voltage Post Environmental Limits High Temperature Life, Biased Humidity, Moisture Resistance Dielectric Rated DC Voltage Capacitance Value Dissipation Factor (Maximum %) Capacitance Shift C0G All All 0.5 0.3% or 0.25 pF Insulation Resistance 10% of Initial Limit (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 6 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Table 1A - Capacitance Range/Selection Waterfall (0603 - 1808 Case Sizes) G Z H 3000 F 2500 D 2000 B 1500 C 1000 500 C1808C G 630 1000 F 500 630 D LB LB LB LB LB LB LB LB LB LB LB LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LA LB LB LB LB LB LC LC LC LC LC LC LC LC LC LC LA LA LA LA LA LA LA LB LB LB LB LB LB LB LB LB LB LB LA LA LA LA LA LA LA LA LA LA LA LA LA LB LB LB LB LB LB LB LB LB LB LC LC LC LC LC LC LA LA LA LA LA LA LB LB LC LC LB LB LB LB LB LB LB LB LB LB LB LB LA LA LA LA LA LA LA LA LA LA LA LA LA LB LB LB LB LB LB LB LB LB LB LC LC LC LC LC LC LB LB LB LC LA LA LA LA LA LB LB LB LB LB LB LB LB LB LB LB LB LB LA LA LA LA LA LA LA LB LB LB LB LB LB LC LC LC LC LA LA LA LA LA LB LB LC LC LC LB LB LB LB LB LB LB LB LB LB LB LB LB LB LC LC LC LC LC LC LC LC LA LA LA LA LB LB LC LC LB LB LB LB LB LB LB LB LB LC LC LC LC LC LC LC LC LC LC LC LC LC LC LC LB LB LB LB LB LB LB LB LB LB LB LB LC LC LC LC Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions Rated Voltage (VDC) 630 1000 1500 2000 500 630 1000 1500 2000 2500 3000 FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FS FS FS FS FS FS FS FS 500 FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FK FK FK FK FK FS FS FS FS FS FS FM FM FY FY FS FS 2000 FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FM FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FG FM FM FG FM FM FG FM FM FG FM FM FG FM FM FG FM FM FG FM FM FG FM FM FM FM FM FM FM FM FM FK FK FM FK FK FM FS FS FK FS FS FK FS FS FK FS FS FK FL FS FK FL FS FS FL FS FS FL FS FS FL FF FS FM FG FL FM FG FL FY FL FM FY FL FM FY FM FY FS FM 1500 ED ED ED ED ED EF EF EF EF EG EG EG EG EG EG EG EG EG EG 1000 ED ED ED ED ED ED ED ED ED ED ED ED EF EF EF EF EG EG EG EG EG EG EG EG EG EG EG 630 ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED EF EF EF EF EF EG EG EG EG EG EG EG EG EG ED ED ED ED ED EF EF EF EG EG 500 ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED EF EF EF EF EG EG EG EG EG EG EB EB EB EB EB EB EC EC ED ED EE 1000 ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED ED EF EF EF EF EF EF EG EG EG EG EB EB EC EC ED ED EE 630 DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DN DN DN DN DP DP DP DG DG DG DG DG B 2000 500 CG CG CG CG CG CG CG CG CG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DN DN DN DN DN DP DP DG DG DG DG DG C 500 Cap Code CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG CG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DG DN DN DN DN DN DP DP DG DG DG DG DG G 1500 1000 109 - 919* B C D 100 - 470* F G J K M 510 F G J K M 560 F G J K M 620 F G J K M 680 F G J K M 750 F G J K M 820 F G J K M 910 F G J K M 101 F G J K M CG 111 F G J K M CG 121 F G J K M CG 131 F G J K M CG 151 F G J K M CG 161 F G J K M CG 181 F G J K M CG 201 F G J K M CG 221 F G J K M CG 241 F G J K M CG 271 F G J K M CG 301 F G J K M CG 331 F G J K M CG 361 F G J K M CG 391 F G J K M CG 431 F G J K M CG 471 F G J K M CG 511 F G J K M CG 561 F G J K M CG 621 F G J K M CG 681 F G J K M CG 751 F G J K M 821 F G J K M 911 F G J K M 102 F G J K M 112 F G J K M 122 F G J K M 132 F G J K M 152 F G J K M 162 F G J K M 182 F G J K M 202 F G J K M 222 F G J K M 242 F G J K M 272 F G J K M 302 F G J K M 332 F G J K M 362 F G J K M 392 F G J K M 432 F G J K M 472 F G J K M 512 F G J K M F 1000 630 Capacitance Tolerance D 630 Rated Voltage (VDC) C1210C B 500 C 2000 D 1500 B 1000 C 630 D 1000 Capacitance B 630 1.0 - 9.1 pF* 10 pF - 47pF* 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF 110 pF 120 pF 130 pF 150 pF 160 pF 180 pF 200 pF 220 pF 240 pF 270 pF 300 pF 330 pF 360 pF 390 pF 430 pF 470 pF 510 pF 560 pF 620 pF 680 pF 750 pF 820 pF 910 pF 1,000 pF 1,100 pF 1,200 pF 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF Cap Code C1206C C 500 Capacitance C0805C Voltage Code 500 Case Size/Series C0603C Voltage Code C B D C B D C B D F G C B D F G C B D F G Z H Case Size/Series C0603C C0805C C1206C C1210C C1808C *Capacitance range Includes E24 decade values only (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91.) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions.) These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 7 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Table 1A - Capacitance Range/Selection Waterfall (0603 - 1808 Case Sizes) cont'd 2000 2500 3000 2500 3000 C B D C B D C B D F G C B D F G C B D F G Z H F F F F F F F F F F F G G G G G G G G G G G J J J J J J J J J J J K K K K K K K K K K K 1000 Voltage Code Capacitance Tolerance 630 2000 500 1500 2000 Rated Voltage (VDC) 1500 1500 H 1000 1000 Z 630 630 G 500 500 F 2000 D 1500 B 1000 C 630 G 500 F 2000 500 D 2000 1000 B 1500 630 C 1500 500 G 1000 1000 F 1000 630 C1808C D 630 Rated Voltage (VDC) C1210C B 630 C 500 D 1000 B 630 Capacitance Cap Code C 500 562 622 682 752 822 912 103 123 153 183 223 D 1000 5,600 pF 6,200pF 6,800pF 7,500pF 8,200pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF B 630 Cap Code C1206C C 500 Capacitance C0805C Voltage Code 500 Case Size/Series C0603C LB LC LC LA LA LA LA LA LB LC LC LC LC LA LA LA LA LA LB LC LC LC LC Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions M M M M M M M M M M M Case Size/Series C0603C EF EF EG EG EG EG EH EF EF EG EG EG EG EH C0805C FY FY FY FS FS FF FG FG FM FM FY FS FE FE FF FF FF FG FG FM FM FY FM FY FY C1206C C1210C C1808C *Capacitance range Includes E24 decade values only (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91.) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions.) These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts. Table 1B - Capacitance Range/Selection Waterfall (1812 - 2225 Case Sizes) 2000 2500 3000 GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF Rated Voltage (VDC) 2000 2500 3000 2500 1500 2000 GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK 1500 1500 1000 1000 GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK Voltage Code C B D F G Z H C B D F G Z H C B D F G Z H C B D F G Z H M M M M M M M M M M M M M M M Case Size/Series C1812C 2000 GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK Capacitance Tolerance F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K 1500 GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK Rated Voltage (VDC) 1000 GK GK GK GK GK GK GK GK GK GK GK GK GK GK GK 1000 H 500 Z 630 G 500 F 630 D 3000 B 3000 C 2500 H 2000 Z 1500 G 1000 F 500 630 D 630 500 B 500 3000 C 630 2500 H 3000 2000 Z 3000 1500 G 2500 1000 F 2500 500 630 D 2000 B 1500 C 1000 H 630 Z 500 G 3000 F 2500 D 2000 B C2225C 1500 Cap Code C C2220C 1000 Capacitance 100 - 470* 510 560 620 680 750 820 910 101 111 121 131 151 161 181 Voltage Code C1825C 500 10 pF - 47pF* 51 pF 56 pF 62 pF 68 pF 75 pF 82 pF 91 pF 100 pF 110 pF 120 pF 130 pF 150 pF 160 pF 180 pF Cap Code C1812C 630 Capacitance Case Size/ Series Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions C1825C C2220C C2225C *Capacitance range Includes E24 decade values only (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91.) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions.) These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 8 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Table 1B - Capacitance Range/Selection Waterfall (1812 - 2225 Case Sizes) cont'd 1500 2000 2500 2500 1000 3000 500 630 GH GH GH GH GH GH GK GK GK GK GH GH GH GH GH GH GH GH GK GK GK GK GK GK GK GK GK GK GK GK GM GM GO GO GO GO GH GH GK GK GM GM GH GH GH GH GH GH GK GK GK GK GK GK GK GK GK GK GH GH GH GH GH GK GK GM GM GO GO GO GH GH GH GH GH GH GH GK GK GK GH GH GH GH GK GK GM GM GO GO GO GO GK GK GK GK GK GK GK GK GK GK GM GM GM GO GM GM GM GM GM GO GO GO HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HG HG HG HG HG HG HG HG HG HG HG HG HE HE HE HE HG HJ HJ HK HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HG HG HG HG HG HG HG HG HG HG HG HG HE HE HE HE HE HE HG HG HG HJ HK HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HE HG HG HG HG HG HG HG HG HG HG HG HG HG HG HG HJ HJ HJ HK HK HE HE HE HE HE HE HE HE HE HE HE HE HE HE HG HG HG HG HG HG HG HG HG HG HE HE HE HE HE HG HG HJ HJ HJ HK HK HE HE HE HE HE HE HE HE HE HE HE HG HG HG HG HG HG HG HG HG HE HE HG HG HJ HJ HJ HK HK HE HE HE HE HE HE HE HE HE HE HE HE HE HG HG HG HG HG HJ HJ HJ HK HK HG HG HG HG HG HG HG HG HJ HJ HJ HJ HK HK JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JE JE JE JE JE JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JL JN JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JE JK JL JL JN JN JK JK JK JK JK JE JE JE JE JE JK JK JK JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JK JK JL JL JL JN JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JK JK JK JK JE JE JE JE JE JK JK JK JK JL JL JN JN JN JK JK JK JK JK JE JE JE JE JE JK JK JK JK JK JK JK JK JK JK JE JE JE JE JK JK JL JL JL JN JN JN JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JK JL JL JL JL JN JK JK JK JK JK JK JK JK JE JK JK JL JL JL JL JN JN JN KF KF KE KE KE KE KE KE KE KF KF KF KF KF KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KF KF KF KF KE KE KE KF KF KH KJ KF KF KE KE KE KE KE KE KE KF KF KF KF KF KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KF KF KF KF KF KF KF KF KE KE KE KE KE KF KH KJ KJ KF KF KE KE KE KE KE KE KE KF KF KF KF KF KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KF KF KF KF KF KF KF KF KF KF KH KH KH KJ KF KF KE KE KE KE KE KE KE KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KF KE KE KE KE KF KF KF KH KH KH KJ KJ KF KF KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KE KF KF KF KF KE KE KE KF KH KH KH KJ KJ KJ KF KF KE KE KE KE KE KE KE KE KE KE KF KF KF KF KF KF KF KF KH KH KH KH KJ KJ KF KF KF KF KF KF KF KF KF KF KF KF KH KH KH KJ KJ KJ Rated Voltage (VDC) 2500 3000 GH GH GH GH GH GH GK GK GK GK GH GH GH GH GH GH GH GH GK GK GK GK GK GK GK GK GH GH GH GH GH GH GH GH GK GK GK GM GM GO GO GO GH GH GH GH GK GM 3000 2000 2500 1500 1500 2000 1000 GH GH GH GH GH GH GK GK GK GK GH GH GH GH GH GH GH GH GH GH GH GK GK GK GK GK GK GK GK GK GK GK GH GH GH GH GH GH GH GK GM GM GO GO GH GH GK GM 2000 500 630 1000 H 1500 Z 1000 G 500 F 630 D 500 B 630 C 3000 H 2500 Z 3000 G 2000 F 1500 D 1000 B 500 C 630 H 3000 Z 2000 G 2500 F 1500 D 1000 B 500 C 630 3000 1500 H 3000 1000 Z 2000 500 630 G 2500 F 2000 D 2500 B C2225C 1500 Cap Code C C2220C 1000 Capacitance 201 221 241 271 301 331 361 391 431 471 511 561 621 681 751 821 911 102 112 122 132 152 162 182 202 222 242 272 302 332 362 392 432 472 512 562 622 682 752 822 912 103 123 153 183 223 273 333 393 Voltage Code C1825C 500 200 pF 220 pF 240 pF 270 pF 300 pF 330 pF 360 pF 390 pF 430 pF 470 pF 510 pF 560 pF 620 pF 680 pF 750 pF 820 pF 910 pF 1,000 pF 1,100 pF 1,200 pF 1,300 pF 1,500 pF 1,600 pF 1,800 pF 2,000 pF 2,200 pF 2,400 pF 2,700 pF 3,000 pF 3,300 pF 3,600 pF 3,900 pF 4,300 pF 4,700 pF 5,100 pF 5,600 pF 6,200pF 6,800pF 7,500pF 8,200 pF 9,100 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF Cap Code C1812C 630 Capacitance Case Size/ Series Voltage Code C B D F G Z H C B D F G Z H C B D F G Z H C B D F G Z H Rated Voltage (VDC) Capacitance Tolerance F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K F G J K M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M M Case Size/Series C1812C Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions C1825C C2220C C2225C *Capacitance range Includes E24 decade values only (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91.) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions.) These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 9 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Table 1C - Capacitance Range/Selection Waterfall (2824 - 4540 Case Sizes) Case Size/Series C2824C 2000 G SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SA SB SB SC SA SA SA SA SA SA SA SA SA SA SA SA SA SA SB SB SC SA SA SA SA SA SA SA SA SA SA SA SB SB SB SC SA SA SA SA SA SA SB SB SB SC SA SA SA SA SB SB SB SC 2000 F 1500 D 1500 F B 1000 D C 1000 B G 630 1500 C F 630 1000 Voltage Code D 500 Rated Voltage (VDC) B 500 TA TA TA TB TB TC C 2000 500 TA TA TA TA TB TB TB TC G 2000 2000 TA TA TA TA TA TA TA TA TA TA TB TB TC F C4540C 1500 1500 TA TA TA TA TA TA TA TA TA TA TA TA TB TB TB TC D 1000 1000 TA TA TA TA TA TA TA TA TA TA TA TA TA TA TB TB TB TC B 630 C 500 G 2000 F 1500 D 1000 B C3640C 630 C Rated Voltage (VDC) Capacitance Tolerance J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M J K M 630 G C B D F G 630 1000 1500 G C B D F MA MA MA MA MA MA MA MA MA MA MA MA MA MA MA MB MB MC MC MA MA MA MA MA MA MA MA MA MA MA MA MA MB MB MC MA MA MA MA MA MA MA MA MA MA MA MB MB MC MA MA MA MA MA MA MB MB MC MA MA MA MA MB MB MB MC 1500 QB QB QB QB QC QC QD 1000 QB QB QB QB QB QC QC QD QD 630 QB QB QB QB QB QB QB QB QB QB QC QC QC QD 500 QB QB QB QB QB QB QB QB QB QB QB QB QC QC QC QD QD 2000 QB QB QB QB QB QB QB QB QB QB QB QB QB QB QB QC QC QC QD 500 Product Availability and Chip Thickness Codes See Table 2 for Chip Thickness Dimensions 2000 Cap Code Voltage Code 630 Capacitance 222 272 332 392 472 562 682 822 103 123 153 183 223 273 333 393 473 563 683 823 104 124 154 C3040C 500 2,200 pF 2,700 pF 3,300 pF 3,900 pF 4,700 pF 5,600 pF 6,800 pF 8,200 pF 10,000 pF 12,000 pF 15,000 pF 18,000 pF 22,000 pF 27,000 pF 33,000 pF 39,000 pF 47,000 pF 56,000 pF 68,000 pF 82,000 pF 0.1 F 0.12 F 0.15 F Cap Code C2824C 500 Capacitance Case Size/ Series G C B D F C3040C C3640C C4540C *Capacitance range Includes E24 decade values only (i.e., 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, and 91.) KEMET reserves the right to substitute product with an improved temperature characteristic, tighter capacitance tolerance and/or higher voltage capability within the same form factor (configuration and dimensions.) These products are protected under US Patents 7,172,985 and 7,670,981, other patents pending, and any foreign counterparts. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 10 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Table 2 - Chip Thickness/Tape & Reel Packaging Quantities Paper Quantity Plastic Quantity Thickness Code Case Size Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel CG DN DP DG EB EC ED EE EF EG EH FE FF FG FL FM FY FK FS LA LB LC GH GK GM GO HE HG HJ HK JE JK JL JN KE KF KH KJ TA TB TC QB QC QD MA MB MC SA SB SC 0603 0805 0805 0805 1206 1206 1206 1206 1206 1206 1206 1210 1210 1210 1210 1210 1210 1210 1210 1808 1808 1808 1812 1812 1812 1812 1825 1825 1825 1825 2220 2220 2220 2220 2225 2225 2225 2225 2824 2824 2824 3040 3040 3040 3640 3640 3640 4540 4540 4540 0.80 0.10* 0.78 0.10* 0.90 0.10* 1.25 0.15 0.78 0.10 0.90 0.10 1.00 0.10 1.10 0.10 1.20 0.15 1.60 0.15 1.60 0.20 1.00 0.10 1.10 0.10 1.25 0.15 1.40 0.15 1.70 0.20 2.00 0.20 2.10 0.20 2.50 0.30 1.40 0.15 1.60 0.15 2.00 0.15 1.40 0.15 1.60 0.20 2.00 0.20 2.50 0.20 1.40 0.15 1.60 0.20 2.00 0.20 2.50 0.20 1.40 0.15 1.60 0.20 2.00 0.20 2.50 0.20 1.40 0.15 1.60 0.20 2.00 0.20 2.50 0.20 1.40 0.15 2.00 0.20 2.50 0.20 1.40 0.15 2.00 0.20 2.50 0.20 1.40 0.15 2.00 0.20 2.50 0.20 1.40 0.15 2.00 0.20 2.50 0.20 4000 4000 4000 0 4000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 15000 15000 15000 0 10000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2,500 4,000 4,000 2,500 2,500 2,500 2,000 2,000 2,500 2,500 2,500 2,000 2,000 2,000 2,000 1,000 1,000 1,000 1,000 1,000 1,000 500 500 1,000 1,000 500 500 1,000 1,000 500 500 1,000 1,000 500 500 750 300 300 500 500 350 250 250 250 200 200 200 0 0 0 10,000 10,000 10,000 10,000 10,000 10,000 8,000 8,000 10,000 10,000 10,000 8,000 8,000 8,000 8,000 4,000 4,000 4,000 4,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 4,000 4,000 2,000 2,000 2,500 2,000 2,000 1,650 1,650 1,400 1,550 1,550 1,000 1,500 1,500 1,500 Thickness Code Case Size Thickness Range (mm) 7" Reel 13" Reel 7" Reel 13" Reel Paper Quantity Plastic Quantity Package quantity based on finished chip thickness specifications. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 11 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Table 3 - Chip Capacitor Land Pattern Design Recommendations per IPC-7351 EIA Size Code Metric Size Code 0603 Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) C Y X V1 V2 C Y X V1 V2 C Y X V1 V2 1608 0.90 1.15 1.10 4.00 2.10 0.80 0.95 1.00 3.10 1.50 0.60 0.75 0.90 2.40 1.20 0805 2012 1.00 1.35 1.55 4.40 2.60 0.90 1.15 1.45 3.50 2.00 0.75 0.95 1.35 2.80 1.70 1206 3216 1.60 1.35 1.90 5.60 2.90 1.50 1.15 1.80 4.70 2.30 1.40 0.95 1.70 4.00 2.00 1210 3225 1.60 1.35 2.80 5.65 3.80 1.50 1.15 2.70 4.70 3.20 1.40 0.95 2.60 4.00 2.90 1808 4520 2.30 1.75 2.30 7.40 3.30 2.20 1.55 2.20 6.50 2.70 2.10 1.35 2.10 5.80 2.40 1812 4532 2.15 1.60 3.60 6.90 4.60 2.05 1.40 3.50 6.00 4.00 1.95 1.20 3.40 5.30 3.70 1825 4564 2.15 1.60 6.90 6.90 7.90 2.05 1.40 6.80 6.00 7.30 1.95 1.20 6.70 5.30 7.00 2220 5650 2.75 1.70 5.50 8.20 6.50 2.65 1.50 5.40 7.30 5.90 2.55 1.30 5.30 6.60 5.60 2225 5664 2.70 1.70 6.90 8.10 7.90 2.60 1.50 6.80 7.20 7.30 2.50 1.30 6.70 6.50 7.00 2824 7260 3.45 1.70 6.60 9.60 7.60 3.35 1.50 6.50 8.70 7.00 3.25 1.30 6.40 8.00 6.70 3040 7610 3.70 1.70 10.70 10.10 11.70 3.60 1.50 10.60 9.20 11.10 3.50 1.30 10.50 8.50 10.80 3640 9210 4.45 1.70 10.70 11.60 11.70 4.35 1.50 10.60 10.70 11.10 4.25 1.30 10.50 10.00 10.80 4540 - 5.60 1.70 10.70 13.90 11.70 5.50 1.50 10.60 13.00 11.10 5.40 1.30 10.50 12.30 10.80 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. KEMET only recommends wave soldering of EIA 0603, 0805 and 1206 case sizes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC Standard 7351 (IPC-7351). Image below based on Density Level B for an EIA 1210 case size. V1 Y Y X X C C V2 Grid Placement Courtyard (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 12 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Soldering Process Recommended Soldering Technique: * Solder wave or solder reflow for EIA case sizes 0603, 0805 and 1206 * All other EIA case sizes are limited to solder reflow only Recommended Reflow Soldering Profile: KEMET's families of surface mount multilayer ceramic capacitors (SMD MLCCs) are compatible with wave (single or dual), convection, IR or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/JSTD-020 standard for moisture sensitivity testing. These devices can safely withstand a maximum of three reflow passes at these conditions. Termination Finish SnPb TP 100% Matte Sn Preheat/Soak Temperature Minimum (TSmin) Temperature Maximum (TSmax) Time (tS) from TSmin to TSmax 100C 150C 60 - 120 seconds 150C 200C 60 - 120 seconds Ramp-Up Rate (TL to TP) 3C/second maximum 3C/second maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 60 - 150 seconds Peak Temperature (TP) 235C 260C Time Within 5C of Maximum Peak Temperature (tP) 20 seconds maximum 30 seconds maximum Ramp-Down Rate (TP to TL) 6C/second maximum 6C/second maximum Time 25C to Peak Temperature 6 minutes maximum 8 minutes maximum TL Temperature Profile Feature tP Maximum Ramp Up Rate = 3C/second Maximum Ramp Down Rate = 6C/second tL Tsmax Tsmin 25 ts 25C to Peak Time Note 1: All temperatures refer to the center of the package, measured on the capacitor body surface that is facing up during assembly reflow. Storage and Handling Ceramic chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature-reels may soften or warp and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40C and maximum storage humidity not exceed 70% relative humidity. Temperature fluctuations should be minimized to avoid condensation on the parts and atmospheres should be free of chlorine and sulfur bearing compounds. For optimized solderability chip stock should be used promptly, preferably within 1.5 years of receipt. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 13 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Construction Detailed Cross Section Barrier Layer (Ni) Termination Finish (100% Matte Sn) Dielectric Material (CaZrO3) Dielectric Material (CaZrO3) End Termination/ External Electrode (Cu) Inner Electrodes (Ni) End Termination/ External Electrode (Cu) Barrier Layer (Ni) Termination Finish (100% Matte Sn) Inner Electrodes (Ni) Capacitor Marking (Optional): Laser marking option is not available on: * * * * C0G, Ultra Stable X8R and Y5V dielectric devices EIA 0402 case size devices EIA 0603 case size devices with Flexible Termination option. KPS Commercial and Automotive grade stacked devices. These capacitors are supplied unmarked only. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 14 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Tape & Reel Packaging Information KEMET offers multilayer ceramic chip capacitors packaged in 8, 12, 16 and 24 mm tape on 7" and 13" reels in accordance with EIA Standard 481. This packaging system is compatible with all tape-fed automatic pick and place systems. See Table 2 for details on reeling quantities for commercial chips. Bar code label Anti-static reel (R) Embossed plastic* or punched paper carrier. ET KEM Chip and KPS orientation in pocket (except 1825 commercial, and 1825 and 2225 Military) Sprocket holes Embossment or punched cavity 8 mm, 12 mm or 16 mm carrier tape 180 mm (7.00") or 330 mm (13.00") Anti-static cover tape (0.10 mm (0.004") maximum thickness) *EIA 01005, 0201, 0402 and 0603 case sizes available on punched paper carrier only. Table 5 - Carrier Tape Configuration, Embossed Plastic & Punched Paper (mm) EIA Case Size Tape Size (W)* Embossed Plastic 7" Reel 13" Reel Pitch (P1)* Punched Paper 7" Reel 13" Reel Pitch (P1)* 01005 - 0402 8 2 2 0603 8 2/4 2/4 0805 8 4 4 4 4 1206 - 1210 8 4 4 4 4 1805 - 1808 12 4 4 1812 12 8 8 2824 16 12 12 3040 - 4540 24 16 16 KPS 1210 12 8 8 KPS 1812 & 2220 16 12 12 Array 0508 & 0612 8 4 4 *Refer to Figures 1 and 2 for W and P1 carrier tape reference locations. *Refer to Tables 6 and 7 for tolerance specifications. New 2 mm Pitch Reel Options* Packaging Ordering Code (C-Spec) Packaging Type/Options C-3190 C-3191 C-7081 C-7082 Automotive grade 7" reel unmarked Automotive grade 13" reel unmarked Commercial grade 7" reel unmarked Commercial grade 13" reel unmarked * 2 mm pitch reel only available for 0603 EIA case size. 2 mm pitch reel for 0805 EIA case size under development. Benefits of Changing from 4 mm to 2 mm Pitching Spacing * Lower placement costs * Double the parts on each reel results in fewer reel changes and increased efficiency * Fewer reels result in lower packaging, shipping and storage costs, reducing waste (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 15 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 OD0 P0 (10 pitches cumulative tolerance on tape 0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity OD1 Cover Tape B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1 Table 4 User Direction of Unreeling Table 6 - Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 E1 P0 P2 1.5+0.10/-0.0 (0.059+0.004/-0.0) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.05 (0.0790.002) 1.5+0.10/-0.0 (0.059+0.004/-0.0) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.10 (0.0780.003) 8 mm 12 mm 16 mm 24 mm R Reference Note 2 25.0 (0.984) 30 (1.181) 30 (1.181) S1 Minimum Note 3 T Maximum T1 Maximum 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) 5 (0.196) 0.250 (0.009) 0.350 (0.013) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Single (4 mm) 12 mm Single (4 mm) & Double (8 mm) 16 mm Triple (12 mm) 24 mm 16 mm E2 Minimum 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 22.25 (0.875) F P1 3.50.05 (0.1380.002) 5.50.05 (0.2170.002) 7.50.05 (0.1380.002) 11.50.10 (0.4520.003) 4.00.10 (0.1570.004) 8.00.10 (0.3150.004) 12.00.10 (0.1570.004) 16.00.10 (0.6290.004) T2 Maximum 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 3 (0.118) W Maximum 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) 24.3 (0.956) A0,B0 & K0 Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 6). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481 paragraph 4.3 section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes and 10 maximum for 16 mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 and 12 mm wide tape and to 1.0 mm maximum for 16 mm tape (see Figure 4). (e) for KPS Series product, A0 and B0 are measured on a plane 0.3 mm above the bottom of the pocket. (f) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 16 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Figure 2 - Punched (Paper) Carrier Tape Dimensions T Po ODo (10 pitches cumulative tolerance on tape 0.2 mm) A0 F P1 T1 T1 Top Cover Tape W E2 B0 Bottom Cover Tape E1 G Cavity Size, See Note 1, Table 7 Center Lines of Cavity Bottom Cover Tape User Direction of Unreeling Table 7 - Punched (Paper) Carrier Tape Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size D0 E1 P0 P2 T1 Maximum G Minimum 8 mm 1.5+0.10/-0.0 (0.059+0.004/-0.0) 1.750.10 (0.0690.004) 4.00.10 (0.1570.004) 2.00.05 (0.0790.002) 0.10 (0.004) Maximum R Reference Note 2 0.75 (0.030) 2 (0.984) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch 8 mm Half (2 mm) 8 mm Single (4 mm) E2 Minimum F P1 T Maximum W Maximum A0 B 0 6.25 (0.246) 3.50.05 (0.1380.002) 2.00.05 (0.0790.002) 4.00.10 (0.1570.004) 1.1 (0.098) 8.3 (0.327) 8.3 (0.327) Note 1 1. The cavity defined by A0, B0 and T shall surround the component with sufficient clearance that: a) the component does not protrude beyond either surface of the carrier tape. b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. c) rotation of the component is limited to 20 maximum (see Figure 3). d) lateral movement of the component is restricted to 0.5 mm maximum (see Figure 4). e) see Addendum in EIA Standard 481 for standards relating to more precise taping requirements. 2. The tape with or without components shall pass around R without damage (see Figure 6). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 17 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 to 1.0 newton (10 to 100 gf) 12 and 16 mm 0.1 to 1.3 newton (10 to 130 gf) 24 mm 0.1 to 1.6 newton (10 to 160 gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA Standards 556 and 624. Figure 3 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Maximum Width (mm) Rotation ( 8,12 20 16 - 200 10 Bo T) Typical Component Centerline Ao Figure 4 - Maximum Lateral Movement 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum s Tape Width (mm) 8,12 16 - 56 72 - 200 Maximum Rotation ( 20 10 5 Figure 5 - Bending Radius Embossed Carrier 16 mm Tape S) Punched Carrier 1.0 mm maximum 1.0 mm maximum R (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com Bending Radius R C1080_C0G_HV_AUTO_SMD * 6/11/2018 18 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Figure 6 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 8 - Reel Dimensions Metric will govern Constant Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm 16 mm 24 mm A B Minimum C D Minimum 1780.20 (7.0080.008) or 3300.20 (13.0000.008) 1.5 (0.059) 13.0+0.5/-0.2 (0.521+0.02/-0.008) 20.2 (0.795) 1.2 (0.047) 13.0 + -0.2 (0.521 + -0.008) 21 (0.826) Variable Dimensions -- Millimeters (Inches) Tape Size N Minimum W1 W2 Maximum W3 50 (1.969) 8.4+1.5/-0.0 (0.331+0.059/-0.0) 12.4+2.0/-0.0 (0.488+0.078/-0.0) 16.4+2.0/-0.0 (0.646+0.078/-0.0) 25+1.0/-0.0 (0.984+0.039/-0.0) 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) 27.4+1.0/-1.0 (1.078+0.039/-0.039) Shall accommodate tape width without interference 8 mm 12 mm 16 mm 24 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 19 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) Figure 7 - Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum leader 400 mm minimum Top Cover Tape Figure 8 - Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 20 Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs) High Voltage C0G Dielectric, 500 - 3,000 VDC (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com C1080_C0G_HV_AUTO_SMD * 6/11/2018 21