For More Detailed Information…
Visit Us Online: www.components.omron.com
• Browse Omron’s full range of Product information and
selection guides.
• Download PDF’s — datasheets, brochures, and more.
• Find Omron solutions for competitive products.
• Locate a Distributor and search for available inventory.
Call Us:
1-847-882-2288 Monday through Friday,
7:30 a.m. to 6:00 p.m. Central Time (CT)
Email Us:
components@omron.com
OMRON ELECTRONICS COMPONENTS LLC
55 Commerce Drive • Schaumburg, IL 60173
REQUIRED PRECAUTIONS
IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS
FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL
BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR
PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM.
BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE
FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR
ATTENTION MUST BE GIVEN:
(i) Outdoor use; uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in signifi cant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment,
and installations subject to separate industry or government regulations.
(iv) Systems, machines, and equipment that could present a risk to life or property.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS
A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON
PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE.
www.components.omron.com
Electronic Components
Master Selection Guide
Relays
Switches
Photomicrosensors
Micro Sensors
Connectors
Omron Electronic Components: The Quality, Flexibility and Global Support You Need
YOI-E-03
© 2006 Omron Electronic Componenets
Printed in the U.S.A. 06/2006
USAcovers.indd 2-3 USAcovers.indd 2-3 7/14/06 2:42:48 PM7/14/06 2:42:48 PM
World-Wide Headquarter Locations
The Americas
U.S.A. / Canada / Brazil - HQ
OMRON ELECTRONIC COMPONENTS LLC
(OCB-AM)
55 East Commerce Drive, Suit B, Illinois, 60173
U.S.A.
TEL : 1-847-882-2288 FAX : 1-847-882-2192
Japan – World Headquarters
Japan
OMRON ELECTRONIC COMPONENTS
Kyoto Head Office
Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530
Japan
Tel : 81-75-344-7000 Fax : 81-75-344-7001
Europe
OMRON ELECTRONIC COMPONENTS
EUROPE B.V.
(OCB-EU-Benelux)
Wegalaan 57, 2132 JD Hoofddorp
The Netherlands
TEL : 31-23-568-1200 FAX : 31-23-568-1212
Asia-Pacific
SINGAPORE
OMRON ELECTRONIC COMPONENTS PTE LTD.
(OCB-SG)
750B Chai Chee Road #01-02 Technopark@Chai Chee
Singapore 469002
TEL : 65-7446-7400 FAX : 65-6446-7411
China
HONG KONG
OMRON ELECTRONIC COMPONENTS
(HONG KONG) LTD.
(OCB-HK)
Unit 601-9, Tower 2, Th Gateway No.25, Canton Road,
Tsimshatsui, Kowloon
Hong Kong
TEL : 852-2375-3827 FAX : 852-2375-1475
CHINA
OMRON ELECTRONIC COMPONENTS
TRADING (SHANGHAI) LTD. SHANGHAI OFFICE
(OCB-CN(SH))
Rm2503, Raffles City Shanghai (Office Tower), No.268
Xi Zang Middle Road, Huang Pu District, Shanghai,
200001
China
TEL : 86-21-6340-3737 FAX : 86-21-6340-3757
Omron Electronic Components LLC
Stability and Experience
With over 70 years experience, Omron continues to apply the latest
technologies providing you with innovative effi cient control component
solutions. Our wide range of relays, switches, sensors, and connectors
allows our customers to streamline vendor lists and reduce the cost of
procurement.
Quality First
Our commitment, your benefi t
Omron makes a conscious choice to relentlessly pursue quality. Our
quality engineers are part of the design and manufacturing from the start.
We design and evaluate at the component level, test and adjust during
manufacturing, and examine every physical, mechanical, and electrical
aspect of each fi nal product before it leaves the factory.
Customer Support
Omron’s sales engineers, inside sales representatives, and customer service
staff have experience with all types of electronic applications. No matter
what the application or volume, we will fi nd just the right component
for your project.
RoHS Compliant Products
Most of Omron’s electronic components are already compliant, and
we are striving for 100% compliance by mid 2006.
Broad Product Offering
Relays, The #1 Supplier
In The World:
• MOS FET
• Low Signal
• RF/HF
• Power PCB
• Automotive
• General-Purpose
• Solid State
Switches:
• Snap Action
• Tactile
• DIP
• Dome Array
• Thumbwheel
• Rocker
Additional information can be found at www.components.omrom.com, or
by calling us at: 847.882.2288 Monday through Friday 7:30 AM until 6:00 PM
CST. Our inside sales staff will be ready to provide you with detailed product
information, technical design support, or the location of your local Omron
sales offi ce or authorized distributor.
Photomicrosensors:
• Slotted
• Refl ective
Micro Sensors:
• Pressure
• Tilt
• Flow
• Shock/Vibration
• Clog Filter
Connectors
• FPC
• FFC
Visit: www.components.omron.com
Email: components@omron.com
Phone: 847-882-2288 Monday through Friday 7:30 AM till 6:00 PM CST.
USAcovers.indd 4-5 USAcovers.indd 4-5 7/14/06 2:42:52 PM7/14/06 2:42:52 PM
World-Wide Headquarter Locations
The Americas
U.S.A. / Canada / Brazil - HQ
OMRON ELECTRONIC COMPONENTS LLC
(OCB-AM)
55 East Commerce Drive, Suit B, Illinois, 60173
U.S.A.
TEL : 1-847-882-2288 FAX : 1-847-882-2192
Japan – World Headquarters
Japan
OMRON ELECTRONIC COMPONENTS
Kyoto Head Office
Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530
Japan
Tel : 81-75-344-7000 Fax : 81-75-344-7001
Europe
OMRON ELECTRONIC COMPONENTS
EUROPE B.V.
(OCB-EU-Benelux)
Wegalaan 57, 2132 JD Hoofddorp
The Netherlands
TEL : 31-23-568-1200 FAX : 31-23-568-1212
Asia-Pacific
SINGAPORE
OMRON ELECTRONIC COMPONENTS PTE LTD.
(OCB-SG)
750B Chai Chee Road #01-02 Technopark@Chai Chee
Singapore 469002
TEL : 65-7446-7400 FAX : 65-6446-7411
China
HONG KONG
OMRON ELECTRONIC COMPONENTS
(HONG KONG) LTD.
(OCB-HK)
Unit 601-9, Tower 2, Th Gateway No.25, Canton Road,
Tsimshatsui, Kowloon
Hong Kong
TEL : 852-2375-3827 FAX : 852-2375-1475
CHINA
OMRON ELECTRONIC COMPONENTS
TRADING (SHANGHAI) LTD. SHANGHAI OFFICE
(OCB-CN(SH))
Rm2503, Raffles City Shanghai (Office Tower), No.268
Xi Zang Middle Road, Huang Pu District, Shanghai,
200001
China
TEL : 86-21-6340-3737 FAX : 86-21-6340-3757
Omron Electronic Components LLC
Stability and Experience
With over 70 years experience, Omron continues to apply the latest
technologies providing you with innovative effi cient control component
solutions. Our wide range of relays, switches, sensors, and connectors
allows our customers to streamline vendor lists and reduce the cost of
procurement.
Quality First
Our commitment, your benefi t
Omron makes a conscious choice to relentlessly pursue quality. Our
quality engineers are part of the design and manufacturing from the start.
We design and evaluate at the component level, test and adjust during
manufacturing, and examine every physical, mechanical, and electrical
aspect of each fi nal product before it leaves the factory.
Customer Support
Omron’s sales engineers, inside sales representatives, and customer service
staff have experience with all types of electronic applications. No matter
what the application or volume, we will fi nd just the right component
for your project.
RoHS Compliant Products
Most of Omron’s electronic components are already compliant, and
we are striving for 100% compliance by mid 2006.
Broad Product Offering
Relays, The #1 Supplier
In The World:
• MOS FET
• Low Signal
• RF/HF
• Power PCB
• Automotive
• General-Purpose
• Solid State
Switches:
• Snap Action
• Tactile
• DIP
• Dome Array
• Thumbwheel
• Rocker
Additional information can be found at www.components.omrom.com, or
by calling us at: 847.882.2288 Monday through Friday 7:30 AM until 6:00 PM
CST. Our inside sales staff will be ready to provide you with detailed product
information, technical design support, or the location of your local Omron
sales offi ce or authorized distributor.
Photomicrosensors:
• Slotted
• Refl ective
Micro Sensors:
• Pressure
• Tilt
• Flow
• Shock/Vibration
• Clog Filter
Connectors
• FPC
• FFC
Visit: www.components.omron.com
Email: components@omron.com
Phone: 847-882-2288 Monday through Friday 7:30 AM till 6:00 PM CST.
USAcovers.indd 4-5 USAcovers.indd 4-5 7/14/06 2:42:52 PM7/14/06 2:42:52 PM
General Omron Information
History and Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Core Competencies, Technologies, & Markets served . 3
Relays
MOS FET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 & 5
Low Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 & 7
HF/RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Power PCB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9~13
DC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
General Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . 15~17
Solid State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18~20
Sockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Switches
Designed to "Drop-In" your Application. . . . . . . . . . . . 22
Snap Action* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23~28
Tactile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29~31
DIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 & 33
Photomicrosensors
Photo IC-Slotted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Phototransister - Reflective . . . . . . . . . . . . . . . . . . . . . . . 34
Phototransister - Slotted . . . . . . . . . . . . . . . . . . . . . . . . . 35
Micro Sensors
Flow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Tilt. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Shock/Vibration/Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Connectors
FPC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 & 39
FFC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
* Sealed Snap Action switches are available on pages 26 & 27.
TABLE OF CONTENTS
ECbodyREADERS.indd 1 ECbodyREADERS.indd 1 7/14/06 11:21:25 PM7/14/06 11:21:25 PM
2
Relays - Low Signal
History:
Omron was founded May 10, 1933 in Kyoto, Japan, by founder Kazuma Tateisi. The first product developed and
released by Omron was a timer for X-ray equipment. Since then, Omron has expanded globally and produced
a steady stream of breakthroughs in electronic components that have contributed to the improvement of
productivity in many different industries. Omron’s consistent striving to accurately anticipate the potential needs
of society and develop businesses to satisfy those needs has made the Omron Group what it is today. Dr.
Tateisi’s passion and progressive attitude are instilled to this day in all Omron employees, and the challenge-
oriented spirit remains the main source of Omron’s identity. By consistently preserving the spirit and philosophy
of Omron’s founder, we are determined to continue meeting the challenges of creating a better tomorrow.
Achievements:
• December 1943 – Development of Japan’s first precision switch; established Omron (then Tateisi Electric)
as a ‘technological pioneer’ in Japan.
• 1948 – Establishment of Omron Tateisi Electronics Co. coincided with the successful development and
production of a new current limiter integrating Omron’s precision switch and protective relay technologies.
• 1955-1965 – Launched the full-scale production of control components and the introduction of a steady
stream of new products including advanced precision switches & compact protective relays.
• 1960 – Development of the innovative solid-state proximity switch and solid-state relay.
• 1963 – Introduction of the world’s first automatic meal-ticket vending machine.
• 1969 and 1971 – Development of the first off-line and on-line automatic cash dispensers which established
Omron as one of the pioneers of the banking revolution in Japan.
• 1967 – Completion of the world’s first automated train station system achieved by drawing on the company’s
advanced card system technology.
• January 1990 – the company was renamed to Omron Corporation and marked a commitment to
continue expansion of business lines and global-scale production.
• April 1999 – Omron establishes a strategic system of five specialized, independent business units.
• 2002 – Establishment of Omron China to accelerate market expansion in to China and Asia-Pacific.
Profile:
Omron Corporation is a $5.5 billion global leading supplier of electronics and control system compo-
nents and services.
Omron Business Fields:
Omron History & Profile
Electronic
Components
Business
Automotive
Electronics
Business
Social
System
Business
Healthcare
Business
Industrial
Automation
Business
ECbodyREADERS.indd 2 ECbodyREADERS.indd 2 7/14/06 11:21:26 PM7/14/06 11:21:26 PM
Omron’s Core Competencies, Technologies & Markets Served
Relays - Low Signal
Design Synthesis:
Our products’ designs are based on a combination of our core competencies and core technologies to effectively meet
customer and market needs. By efficiently and creatively manipulating these competencies, we are able to develop and
manufacture a broad offering of cost effective, high quality, and environmentally friendly products. As the global market's
demand for new and innovative products continues to grow, Omron pledges to expand its research and development of
new core technologies.
Commitment to the Environment:
Omron is committed to creating products that are designed with consideration for the environment throughout their entire
lifespan (what we call "Eco-Products"). These considerations address energy and resource conservation, extended product
life, reuse and recycling, as well as avoidance of hazardous chemical substances. Our goal is to make a proactive
contribution to reducing the harm caused by our societal system to the environment through the development of more
environmentally sound products.
3
ECbodyREADERS.indd 3 ECbodyREADERS.indd 3 7/14/06 11:21:30 PM7/14/06 11:21:30 PM
Relays - MOS FET
4
Relays - MOS FET
G3VM-200 G3VM-350 G3VM-400
G3VM
High Voltage
& Dielectric
G3VM
Current
Limiting
General Attributes
Dimensions mm (in) Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Load voltage 0-350V (AC or DC)0-200V (AC or DC) 0-400V (AC or DC) 0-600V (AC or DC) 0-350V (AC or DC)
Features • Broad product offering
• Form A & Form B
configurations
• Ideal for Instrumentation,
Broadband Systems,
Measurement Devices,
Data loggers, Consumer
Electronics, Security
Systems, Electronic
Automatic Exchange
Systems, Industrial
Automation Equipment,
Medical Equipment
• 1 & 2 channel
configurations
• Ideal for Instrumentation,
Broadband Systems,
Measurement Devices,
Data Loggers, Consumer
Electronics, Medical
Equipment
• Broad product offering
• 10kV surge withstand
models available
• Ideal for Instrumentation,
Broadband Systems,
Measurement Devices,
Data Loggers, Consumer
Electronics, Security
Systems, Electronic
Automatic Exchange
Systems, Industrial
Automation Equipment,
Medical Equipment
• Capable of switching
loads up to 600V
(AC and DC)
• 10kV surge withstand
• Ideal for
Instrumentation,
Electronic Automatic
Exchange Systems,
Industrial Automation
Systems, Measurement
Devices, Security
Systems, Medical
Equipment
•
Current limiting of 150 to
300mA
•
Ideal for Electronic
Automatic Exchange
Systems, Multi-function
Telephones, Cordless
Telephones, Measurement
Devices, Instrumentation
Maximum Ratings and
Electrical Characteristics
0-90mA, 0-100mA,
0-110mA, 0-120mA,
0-150mA
0-50mA & 0-200mA 0-120mA 0-100mA 0-120mA
Output capacitance __ ___
ON resistance
(typical)
15Ω, 27Ω, 30Ω, 25Ω,
40Ω
5Ω & 30Ω17Ω & 18Ω25Ω22Ω
Available switching
configurations
1 Form A, 1 Form B,
1 Form A + 1 Form B
2 Form A, 2 Form B
1 Form A, 2 Form A 1 Form A, 2 Form A 1 Form A 1 Form A, 2 Form A
Leakage current 1.0µA (max.)
10nA (max.) & 1.0µA (max.)
1.0µA (max.) 1.0µA (max.) 1.0µA (max.)
turn-ON time
(typical)
0.1ms, 0.25ms,
0.3ms, 0.5ms,
1.0ms
40ms & 600ms 0.3ms & 0.5ms 0.2ms 0.3ms & 0.5ms
Dielectric strength (AC
for 1 minute between
input and output)
1,500Vrms (min.)
2,500Vrms (min.)
1,500Vrms (min.) 1,500Vrms (min.)
2,500Vrms (min.)
5,000Vrms (min.)
5,000Vrms (min.) 1,500Vrms (min.)
2,500Vrms (min.)
Accessories Tape & reelTape & reel Tape & reel Tape & reel Tape & reel
Available packaging &
terminal choices
PCB, SMT, SOP
4 PIN, 6 PIN, 8 PIN
SOP
4 PIN, 6 PIN, 8 PIN
PCB, SMT, SOP
4 PIN, 6 PIN, 8 PIN
PCB & SMT
6 PIN
PCB, SMT & SOP
4 PIN, 6 PIN, 8 PIN
Approved standards UL 1577UL 1577 UL 1577 UL 1577 UL 1577
turn-OFF time
(typical)
0.1ms, 0.15ms,
0.5ms, 1.0ms,
3.0ms
100ms 0.1ms & 0.5ms 0.2ms 0.3ms & 0.5ms
Continuous load current
ECbodyREADERS.indd 4 ECbodyREADERS.indd 4 7/14/06 11:21:31 PM7/14/06 11:21:31 PM
Relays - MOS FET
Relays - MOS FET
5
G3VM GR G3VM LR G3VM-60 G3VM-80 G3VM-22
General Attributes
Dimensions mm (in) Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Please refer to specific
data sheets for all
dimensional information
Load voltage 0-20V (AC or DC)
0-40V (AC or DC)
0-20V (AC or DC)
0-40V (AC or DC)
0-60V (AC or DC) 0-80V (AC or DC) 0-20V (AC or DC)
Features • Smallest MOS FET relay
on the market
• C x R characteristics as
low as 5pF*Ω
• Low leakage current
• Very high operating
speed
• Ideal for IC and
Memory Test
Equipment, SoC Testers,
Measurement Devices,
Instrumentation, Medical
Equipment, Broadband
Systems, Data Loggers,
Security Systems
• C x R characteristics as
low as 5pF*Ω
• Low leakage current
• Very high operating
speed
• Ideal for IC and
Memory Test
Equipment, SoC Testers,
Measurement Devices,
Instrumentation, Medical
Equipment, Broadband
Systems, Data Loggers,
Security Systems
• High current switching
capability
• Low ON-resistance
• Low leakage current
• Cost effective solutions
• Ideal for Measurement
Devices, Instrumentation,
Security Systems,
Medical Equipment,
Alarm Controls,
Consumer Electronics
• High current switching
capability
• Low leakage current
• Ideal for Broadband
Systems,
Measurement Devices,
Instrumentation, Medical
Equipment, Data
Loggers, Consumer
Electronics
• Single input channel with
dual output channels
• Low ON-resistance
• Ideal for Inline Interface
Applications, Data
Loggers, ADSL Modems
and Routers, Edge
Routers, Data Storage
Devices
Maximum Ratings and
Electrical Characteristics
Continuous load current 0-120mA
0-160mA
0-300mA
0-450mA
0-120mA
0-160mA
0-300mA
0-400mA
0-500mA
0-1,000mA
0-2,000mA
0-2,500mA
0-350mA
0-1,250mA
0-150mA
Output capacitance 0.8pF (typ.)
1.0pF (typ.)
5.0pF (typ.)
10pF (typ.)
1.0pF (typ.)
5.0pF (typ.)
10pF (typ.)
___
ON resistance
(typical)
0.8Ω, 1Ω, 5Ω, 10Ω 1Ω, 5Ω, 10Ω
0.12Ω (max.)
7Ω (max.)
1Ω (typ.)
0.11Ω & 1.0Ω2Ω
Available switching
configurations
1 Form A1 Form A 1 Form A 1 Form A Dual 1 Form A
Leakage current 1.0nA (max.)1.0nA (max.)
1.0nA (max.) & 1.0µA (max.)
0.2nA (typ.) & 1.2nA (typ.) 1.0µA (max.)
turn-ON time
(typical)
0.3ms0.3ms 0.8ms
1.0ms
1.4ms
0.3ms
2.0ms
0.5ms
Dielectric strength (AC
for 1 minute between
input and output)
1,500Vrms (min.)1,500Vrms (min.) 1,500Vrms (min.)
2,500Vrms (min.)
1,500Vrms (min.) 2,500Vrms (min.)
Accessories Tape & reelTape & reel Tape & reel Tape & reel Tape & reel
Available packaging &
terminal choices
SOP
4 PIN
SOP
4 PIN
SOP, PCB, SMT
4 PIN, 6 PIN
SOP
4 PIN, 6 PIN
PCB & SMT
8 PIN
Approved standards UL 1577UL 1577 UL 1577 UL 1577 UL 1577
turn-OFF time
(typical)
0.3ms0.3ms 0.1ms
0.2ms
0.6ms
0.3ms
0.7ms
0.5ms
ECbodyREADERS.indd 5 ECbodyREADERS.indd 5 7/27/06 8:32:01 AM7/27/06 8:32:01 AM
Relays - Low Signal
6
Relays - Low Signal
G6J-Y G6K G6H G6S G6A
General Attributes
Dimensions mm (in) 5.30 H x 10.20 L x 6.70 W
(0.21 x 0.40 x 0.26)
10.0 H x 10.6 L x 5.7 W
(0.39 x 0.42 x 0.22)
5.08 H x 13.97 L x 8.89 W
(0.20 x 0.55 x 0.35)
9.40 H x 15 L x 7.50 W
(0.37 x 0.59 x 0.30)
8.40 H x 20.20 L x 10.10 W
(0.33 x 0.80 x 0.40)
Switching 1A max.1A max. 1A max. 2A max. 2A max.
Features
Contact Information
Contact form 2 Form C2 Form C 2 Form C 2 Form C 2 Form C, 4 Form C
Contact type Bifurcated crossbarBifurcated crossbar Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar
Rated load
(under resistive load)
0.3A @ 125VAC,
1A @ 30VDC
0.3A @ 125VAC,
1A @ 30VDC
0.5A @ 125VAC,
1A @ 30VDC
0.5 @ 125VAC,
2A @ 30VDC
Contact material Ag with Au cladAg with Au alloy clad Ag with Au clad Ag with Au clad;
AgPd with Au clad
Ag with Au clad;
AgPd with Au clad
Max. operating voltage 125VAC, 60VDC125VAC, 110VDC 125VAC, 110VDC 250VAC, 220VDC 250VAC, 220VDC
Max. switching capacity
under resistive load
37.5VA, 30W37.5VA, 30W (NO) 62.5VA, 33W 62.5VA, 60W 125VA, 60W
Min. electrical service life
(operations at rated load)
100,000100,000 100,000 100,000 500,000
Min. permissible load
(for reference only)
10µA @ 10mVDC10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC
Coil Information
Coil voltage 3, 4.5, 5, 6, 9, 12, 24VDC3, 4.5, 5, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC
Surge withstand 2.5kV (2 x 10µs)2.5kV (2 x 10µs) 1.5kV (10 x 160µs) 2.5kV (2 x 10µs) 1.5kV (10 x 160µs)
Power consumption 100mW
(standard and latching)
140mW
(230mW for DC24)
140mW (standard) 140mW (standard)
140mW, 200mW (latching)
200mW (DPDT standard)
180mW (DPDT latching)
360mW (4PDT standard)
Characteristics
Dielectric strength
between coil & contacts
(50/60 Hz for 1 minute)
1,500VAC1,500VAC 1,000VAC 2,000VAC 1,000VAC
Terminal choices SMT Gullwing,
SMT Inside-L, PCB
SMT Gullwing, PCB PCB (G6H),
SMT Gullwing (G6H-2F)
SMT Gullwing,
SMT Inside-L, PCB
PCB
Packaging Tape & reel availableTape & reel available Tape & reel available Tape & reel available –
Approved standards Bellcore 2.5kV / Telcordia
GR-1089-CORE 2.5kV
between coil and contacts
Bellcore 2.5kV / Telcordia
GR-1089-CORE 2.5kV
between coil and contacts
UL, CSA, (FCC Part 68) Bellcore 2.5 kV / Telcordia
GR-1089-CORE 2.5 kV
(between coil and contacts)
UL, CSA, (FCC Part 68)
• Slimline, 2 Form C,
1 Amp relay
• SMT & PCB versions
• 2.5kV surge withstand
• Available in SMT & PCB
• Latching & non-latching
versions
• Ideal for Telecom, Test &
Measurement, Medical,
Security, Computer
Peripheral, Office
Automation
• Small real estate,
2 Form C, 1 Amp relay
• 100mW power
consumption
• 2.5kV surge withstand
• SMT & PCB versions
• Latching & non-latching
models
• Ideal for Telecom,
Test & Measurement,
Medical, Security, Office
Automation, Computer
Peripheral
• Low profile (5mm),
2 Form C, 1 Amp relay)
• Available in SMT & PCB
• 1.5kV surge withstand
• 140mW power
consumption
• Ideal for Telecom,
Test & Measurement,
Medical, Security, Office
Automation, Computer
Peripheral
• Industry standard,
2 Form C, 2 Amp relay
• 2.5 kV surge withstand
• SMT gullwing, SMT
inside-L, PCB models
• Latching & non-latching
versions
• European version
available (supplemen-
tary insulation at 250V
at pollution degree 2 per
EN60950/EN41003)
• Ideal for Telecom,
Thermostats, Medical,
Test & Measurement,
Security
• Industry standard,
2 Form C, 2 Amp relay
• 200mW, 400mW
versions
• 2 Pole & 4 Pole models
• Latching & non-latching
versions
• 1.5kV surge withstand
• Ideal for Telecom, Test
& Measurement,
Security
0.3A to 0.5A @ 125VAC,
1A to 2A @ 30VDC
ECbodyREADERS.indd 6 ECbodyREADERS.indd 6 7/23/06 6:42:10 PM7/23/06 6:42:10 PM
Relays - Low Signal
Relays - Low Signal
7
G5A G5V-1 G6L G5V-2 G6E
General Attributes
Dimensions mm (in) 10.0 H x 12.50 L x 7.50 W
(0.39 x 0.49 x 0.30)
8.38 H x 16 L x 9.9 W
(0.33 x 0.63 x 0.39)
4.5 H x 10.6 L x 7.0 W
(0.18 x 0.42 x 0.28
11.43 H x 20.32 L x 9.91 W
(0.45 x 0.80 x 0.39)
8.38 H x 16 L x 9.9 W
(0.33 x 0.63 x 0.39)
Switching 1A max.1A max. 1A max. 2A max. 3A max.
Features • General use, 1 Form C,
1 Amp relay
• 150mW power
consumption
•1.5kV surge withstand
• Ideal for Telecom,
Security, Computer
Peripheral
• General use, 2 Form C,
1 Amp relay
• Semi-sealed or fully-
sealed construction
• Ideal for Telecom,
Security, Computer
Peripheral, Office
Automation
• Very low profile,
1 Form A, 1 Amp relay
• 1.5kV surge withstand
• SMT & PCB versions
• Ideal for Security &
General Use
• 2 Form C, 1-2 Amp relay
• Ideal for general use
• Industry standard
footprint
• 150mW, 360mW &
500mW coil power
versions
• 1.5 kV surge withstand
• General use, 1 Form C,
3 Amp relay
• 2.5 kV surge withstand
• 200mW, 400mW models
• Latching and non-latching
versions
Contact Information
Contact form 1 Form C2 Form C 1 Form A 2 Form C 1 Form C
Contact type Single crossbarBifurcated crossbar Single crossbar Bifurcated crossbar Bifurcated crossbar
Rated load
(under resistive load)
0.5A @ 125VAC,
1A @ 24VDC
0.5A @ 24VAC,
1A @ 24VDC
0.3A @ 125VAC,
1A @ 24VDC
0.5A @ 125VAC,
2A @ 30VDC
0.4A @ 125VAC,
2A @ 30VDC
Contact material Ag with Au cladAg with Au clad Ag with Au clad Ag with Au clad Ag with Au clad
Max. operating voltage 125VAC, 60VDC125VAC, 125VDC 125VAC, 60VDC 125VAC, 125VDC 250VAC, 220VDC
Max. switching capacity
under resistive load
62.5VA, 30W37.5VA, 33W 37.5VA, 24W 62.5VA, 60W 50VA, 60W
Min. electrical service life
(operations at rated load)
100,000100,000 100,000 300,000 100,000
Min. permissible load
(for reference only)
1mA @ 5VDC1mA @ 5VDC 1mA @ 5VDC 10µA @ 10mVDC 10µA @ 10mVDC
Coil Information
Coil voltage 5, 6, 9, 12, 24VDC5, 6, 9, 12, 24, 48VDC 3, 4.5, 5, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 5, 6, 9, 12, 24, 48VDC
Surge withstand 1.5kV (10 x 160µs)_–1.5kV (10 x 160µs) 2.5kV (2 x 10µs)
Power consumption 150mW200mW
(standard & latching)
180mW (standard) 500mW (standard)
360mW (high-sensitivity)
150mW (ultra-sensitive)
200mW (standard)
400mW (standard)
Characteristics
Dielectric strength
between coil & contacts
(50/60 Hz for 1 minute)
1,000VAC1,000VAC 1,000VAC 1,000VAC 1,500VAC
Terminal choices PCBPCB PCB, SMT Gullwing PCB PCB
Packaging –– Tape & reel available ––
Approved standards UL, CSAUL, CSA UL/CSA (FCC Part 68) UL, CSA UL/CSA (FCC Part 68)
Bellcore 2.5kV / Telcordia
GR-1089-CORE 2.5kV
between coil and contacts
ECbodyREADERS.indd 7 ECbodyREADERS.indd 7 7/14/06 11:21:43 PM7/14/06 11:21:43 PM
Relays - Low Signal RF/HF
8www.components.omron.com
Relays - Low Signal RF/HF
G6W G6Y G6Z G6K-RF
General Attributes
Dimensions mm (in) 9.20 H x 20.70 L x 11.70 W
(0.36 x 0.81 x 0.46)
8.9 H x 20 L x 8.6 W
(0.35 x 0.79 x 0.34)
5.4 H x 10.3 L x 6.9 W
(0.21 x 0.41 x 0.27)
Switching 1A max. 0.5A max. 1A max.
Features • 900MHz+ HF relay
• 1 Form C
• Micro strip line
technology
• Ideal for CATV, Digital
TV tuners, Test &
Measurement
8.9 H x 20 L x 9.4 W
(0.35 x 0.79 x 0.37)
0.5A max.
• 5GHz+ HF relay
• 1 Form C
• Tri-plate micro strip line
technology
• Latching & non-latching
models
• SMT and PCB versions
• Ideal for Base Station
LNA & TMA switching,
Test & Measurement,
Broadcast, FWA
• 2.6GHz+ HF relay
• 1 Form C
• Micro strip line technology
• 75 Ω & 50 Ω
impedance models
• Latching & non-latching
models
• Reverse terminal configurations
• Y & E terminal configurations
• SMT and PCB versions
• Ideal for Base Station LNA &
TMA switching, CATV, Digital TV
tuners, Test & Measurement,
Broadcast, FWA
• 1GHz+ HF relay
• 2 Form C
• 100mW coil power
• Smallest 2 Form C on the
market
• Ideal for Test &
Measurement, CATV, Digital
TV tuners
HF Characteristics
Isolation
65dB (900MHz)65dB (2GHz)
60dB (2.5GHz)
40dB (5.0GHz)
60 - 65dB (900MHz)
30 - 45dB (2.6GHz)
20 - 30dB (1GHz)
Contact type(s) Twin crossbarTwin crossbar Twin crossbar Bifurcated crossbar
Rated load
(under resistive load)
10mA @ 30VAC;
10mA @ 30VAC;
900 MHz, 1W
10mA @ 30VAC
10mA @ 30VDC
2.5GHz, 10W
10mA @ 30VAC;
10mA @ 30VDC;
900MHz, 10W
0.3A @ 125VAC;
1A @ 30VDC
Contact material Au clad Cu alloyAu clad Cu alloy Au clad Cu alloy Au alloy on Ag base
Max. operating voltage 30VDC, 30VAC30VDC, 30VAC 30VDC, 30VAC 60VDC, 125VAC
Max. switching capacity
under resistive load
10VA, 10W10VA, 10W 10VA, 10W 37.5VA, 30W
Min. electrical service life
(operations at rated load)
300,000 300,000 300,000 300,000
Coil Information
Coil voltage 3, 4.5, 5, 6, 9, 12, 24VDC3, 4.5, 9, 12, 24VDC 3, 4.5, 5, 9, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC
Power consumption 200mW200mW (standard)
200mW (single latching)
360mW (dual latching)
200mW (standard)
200mW (single latching)
360mW (dual latching)
100mW
Characteristics
Dielectric strength
between coil & contacts
(50/60 Hz for 1 minute)
1,000VAC1,000VAC 1,000VAC 750VAC
Terminal choices PCBPCB, SMT Gullwing PCB, SMT Gullwing SMT Gullwing
Packaging / Options –– Tape & reel available –
Contact Information
Contact form 1 Form C1 Form C 1 Form C
Insertion loss 0.5dB (900MHz)0.2dB (2GHz)
0.2dB (2.5GHz)
0.4dB (5.0GHz)
0.1 - 0.2dB (900MHz)
0.3 - 0.5dB (2.6GHz)
0.2dB (1GHz)
VSWR 1.5 (900MHz)1.2 (2GHz)
1.2 (2.5GHz)
1.5 (5.0GHz)
1.1 - 1.2 (900MHz)
1.3 - 1.5 (2.6GHz)
0.2dB (1GHz)
2 Form C
G9YA
39.0 H x 34.0 L x 13.2 W
(1.54 x 1.34 x 0.52)
100mA max.
• 26.5GHz bandwidth
• Coaxial HF relay
• 60dB isolation (26.5GHz)
• Contact carry power of 120W
at 3GHz
• Available in failsafe &
TTL-driven models
• Also available in non-latching
and dual latching configuraitons
• Ideal for Mobile Communications
Infrastructure Equipment,
Broadcast Equipment, Test
and Measurement Equipment,
Wireless LAN
60dB (26.5GHz)
65dB (12.4GHz)
Twin crossbar
100mA @ 30VDC
Au clad Cu alloy
30VDC
120W (3GHz)
5,000,000
4.5, 5, 12, 15, 24, 28VDC
500mW (dual latching)
700mW (failsafe)
500VAC
SMA Terminals, Solder
Terminals, Pin Terminals
Connector Cables
0.8dB (26.5GHz)
0.4dB (12.4GHz)
0.3dB (8GHz)
1.7 (26.5GHz)
1.35 (12.4GHz)
1.25 (8GHz)
1 Form C
NEW!
ECbodyREADERS.indd 8 ECbodyREADERS.indd 8 7/14/06 11:21:45 PM7/14/06 11:21:45 PM
Relays - Power PCB
Relays - Power PCB
9
G5NB G5SB G6D-ASIG5NB-E
Features
Electrical service life
(@ 1800 ops./hr.)
Coil Information
Coil voltage
Approved standards
Contact Information
Contact form
• Small compact form for 10 kV
impulse and 5A switching
capability
• Meets EN tracking resistance
CTI>250
200,000 (resistive):
3A @ 30VDC
100,000:
5A @ 250VAC
• High capacity 5A version
available
• Meets EN tracking resistance
CTI>250
• HA version for home
appliances
(resistive load)
200,000 (resistive):
3A @ 125VAC/30VDC
• High insulation between coil &
contact
• Impulse withstand of 8kV
• Fully Sealed
• Incorporates 5A NO contact
For resistive loads:
200,000: 3 A (NO)/3 A (NC) at
125 VAC; 50,000: 5 A (NO)/3 A (NC)
at 125 VAC; 50,000: 5 A (NO) at
250 VAC; 10,000: 3 A (NC) at
250 VAC; 10,000: 5 A (NO)/3 A (NC)
at 30 VDC
UL, CSA, VDEUL, CSA, VDE UL, CSA, VDE UL, CSA, TUV, SEV
Terminal choices PCBPCB PCB PCB
Dimensions mm (in) 15.3 H x 20.5 L x 7.2 W
(0.60 x 0.81 x 0.28) max.
15.3 H x 20.5 L x 7.2 W
(0.60 x 0.81 x 0.28)
15.8 H x 20.3 L x 10.3 W
(0.62 x 0.80 x 0.41)
12.5 H x 17.5 L x 6.5 W
(0.49 x 0.69 x 0.26)
Operating temperature -40 to +85°C-40 to +70°C -40 to +70°C -25 to +70°C
1 Form A1 Form A 1 Form A 1 Form A
Contact type(s) Single buttonSingle button Single button
Single button
Contact material(
s) AgSnInAgNi AgNi/AgSnIn AgNi/AgSnIn
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
10kV10kV 8kV 6kV
• Subminiature, slim lightweight
design
• Low power consumption
• Fully Sealed
Minimum permissible load
(for reference only)
10mA @ 5VDC10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC
5, 12, 18, 24VDC5, 12, 18, 24VDC 5, 9, 12, 24VDC 5, 12, 24, 48, 110/120VDC
Power consumption 200mW200mW 400mW 200mW
300,000: 2A @ 30VDC/250VAC
70,000: 5A @ 30VDC/250VAC
Accessories N/A
N/A N/A Socket for back connecting,
sockets with PCB terminals
Insulation class
Class B
Class A Class B Class B
General Attributes
Switching 3A/5A3A/5A 5A(NO)/3A(NC) 5A
4,000VAC (coil-contact)
750VAC
(open contacts)
4,000VAC (coil-contact)
750VAC (open contacts)
4,000VAC (coil-contact)
1,000VAC (open contacts)
3,000VAC (coil-contact)
750VAC (open contacts)
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Max. switching capacity
(and resistive load)
1,250VA, 90W375VA, 90W 1,250VA, 150W(NO)
750VA, 30W(NC)
1,250VA, 150W
Protection level Semi-sealed
Semi-sealed Semi-sealed Semi-sealed
NEW! NEW! NEW!
ECbodyREADERS.indd 9 ECbodyREADERS.indd 9 7/14/06 11:21:49 PM7/14/06 11:21:49 PM
Relays - Power PCB
10
Relays - Power PCB
G6DS G2RG G6BG6M
Features
Coil Information
Coil voltage
Contact Information
Contact form
• Slim 5mm width, & reduced
PCB area (103mm2) ideal for
high-density mounting
• Highly efficient magnetic circuit
for high sensitivity
• UL Class I, Division II approved
for hazardous locations
5, 12, 24VDC
• Slim 5mm for max. density mounting
• High sensitive coil option reduces
power consumption
• Meets EN reinforced insulation
requirement for control equipment
• Fully sealed
• Resistant to mechanical shock
5, 12, 24VDC
• 1.5mm contact gap x 2
poles=3mm total gap meeting
UPS standards
• Dimensions & mounting holes
are same as G2R relay series
• Sealed construction, standard
• Meets EN tracking resistance
CTI > 250
• UL508/CSA 22.2
12, 24VDC
Terminal choices PCBPCB PCB PCB
Dimensions mm (in) 17.7 H x 20.3 L x 5.08 W
(0.70 x 0.80 x 0.20)
12.4 H x 20 L x 5.0 W
(0.60 x 0.81 x 0.28)
25.5 H x 29 L x 13 W
(1.00 x 1.14 x 0.51)
9.91 H x 20.07 L x 9.91 W
(0.39 x 0.79 x 0.39)
Operating temperature -40 to +85°C
-40
to
+85
°
C
-40 to +70°C -25 to +70°C
1 Form A1 Form A 2 Form A 1 Form A, 2 Form A, 2 Form B
1 Form A + 1 Form B
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
5.08kV
6kV
10kV —
• Subminiature and low power
• Sealed construction standard
• Single & dual coil latching
available
Minimum permissible load
(for reference only)
10mA @ 5VDC 5mA @ 24VDC 10mA @ 5VDC 10mA @ 5VDC
5, 6, 12, 24VDC
Power consumption 120mW180mW
120mW (high-sensitivity)
800mW 200mW (1 pole)
300mW (2 pole)
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
100,000: 3A @ 30VDC/250VAC
6,000: 5A @ 250VAC/24VDC
100,000: 5A @ 30VDC/250VAC
80,000 (high sensitivity):
5A @ 30VDC/250VAC
10,000: 8A @ 250VAC 100,000: 5A @ 30 VDC/250VAC
8A @ 30 VDC/250VAC (high-
capacity)
Accessories N/A
Socket for back connecting,
sockets with PCB terminals
N/A
Sockets & clips for back connecting
sockets with PCB terminals
Insulation class
Class B
Class B Class B Class A
Approved standards UL, CSA, VDE, EN, IEC 61131-2,
IEC 61010
UL, CSA, VDE UL, CSA, VDE (O700/0110) UL, CSA, (FCC Part 68)
SEV, TUV, IEC
Protection level Fully sealed
Fully Sealed Fully sealed
General Attributes
Switching 5A
5A
8A 8A/5A
Contact type(s) Single buttonSingle button Single button
Single button
Contact material(
s) Ag-AlloyAgNi AgSnO2AgSnO2
3,000VAC, (coil-contact)
750VAC, (open contacts)
3,000VAC (coil-contacts)
750VAC (open contacts)
5,000VAC, (coil-contact)
3,000VAC, (contacts pole-pole)
1,000VAC (open contacts)
4,000VAC (coil-contact)
2,000VAC (contacts pole-pole)
1,000VAC (open contacts)
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Max. switching capacity
(resistive load)
750VA, 90W1,250VA, 150W 2,000 VA
1,250VA, 150W
2,000VA, 240W (high-capacity type)
Fully sealed
NEW! NEW!
ECbodyREADERS.indd 10 ECbodyREADERS.indd 10 7/14/06 11:22:05 PM7/14/06 11:22:05 PM
Relays - Power PCB
Relays - Power PCB
11
G6RN G5LB/-25 G5QG5LE/-E
Dimensions mm (in)
Minimum permissible load
(for reference only)
Features
Operating temperature
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Insulation class
Contact type(s)
Contact material(
s)
Coil Information
Coil voltage
Power consumption
Terminal choices
Accessories
Contact Information
Contact form
PCB
19 H x 22.5 L x 16.5 W
(0.75 x 0.89 x 0.65)
-40 to +85°C
1 Form A, 1 Form C
Single button
AgSnO2 /AgSnIn (either with gold
plating option)
4.5kV
Class B, F (UL/CSA ONLY)
• Small "sugar cube" size used
as common platform
• Sealed construction optional
• High capacity contacts:-E
•Increased (0.8) contact
gap:-G8
• Special application versions
available
5, 6, 9, 12, 24, 48VDC
100mA
@
5VDC,
400mW /360mW available
100,000:
13A @ 120VAC (@ 85°C/87°C)
5A @ 250 VAC (AgSnO2)
6 FLA, 6 LRA @ 120VAC @ 85°C
TV-5 @120VAC
50,000: 10A @ 250VAC
50,000 16A @ 250VAC
1/8 HP @ 120 VAC (@ 85°C)
30,000: 12A @ 120VAC
N/A
PCB
15 H x 28.5 L x 10 W
(0.59 x 1.12 x 0.39)
-40 to +85°C
1 Form A, 1 Form C
Single button
AgNi +gold plating
—
• 8 mm coil/contact creepage
• Low profile
• Sealed construction standard
• Ideal for switching contactors,
solenoids & motors
5, 6, 12, 24, 48VDC
10mA @ 5 VDC
220mW, 250mW (DC24/48)
100,000:
8A @ 250VAC
5A @ 30VDC
N/A
Class B
PCB
15.2 H x 19.6 L x 15.6 W
(0.60 x 0.77 x 0.61)
-40 to +85°C
1 Form A, 1 Form C
Single button
AgSnO
2
4.5kV
• Sealed construction optional
• 10A switching in low profile
"sugar cube" package
• Optional -25 type meets stringent
EU requirements, including
tracking resistance CTI > 250 &
extended life
• 4.5kV impulse withstand
• Low power consumption
3, 5, 6, 9, 12, 24, 36, 48VDC
100mA @ 5VDC
360mW (standard)
400mW (“-40” style)
600mW (“-60” style)
100,000:
10A @ 120VAC/250VAC
8A @ 30VDC
N/A
Class B, F (-25 type)
PCB
15.8 H x 20.3 L x 10.3 W
(0.62 x 0.80 x 0.41)
-40 to +105°C
1 Form A, 1 Form C
Single button
AgNi
8kV
• Compact PCB relay with high
insulation
• With stands impulse of 8kV
coil-contacts
• Meets EN tracking resistance
CTI >250
• Class F coil insulation standard
• Low power consumption
5, 12, 24VDC
10mA @ 5VDC
400mW Form C
200mW Form A
2,000VAC (coil-contact)
750VAC (open contacts)
4,000VAC (coil-contact)
1,000 (open contacts)
2,000VAC (coil-contact)
750VAC (open contacts)
4,000VAC (coil-contact)
1,000VAC (open contacts)
200,000:
3A (NO)/3 A (NC) @ 125VAC
100,000:
3A (NO)/3 A (NC) @ 250VAC
5A (NO)/3 A (NC) @ 30VDC
50,000: 10A (NO) @125VAC
(900 ops. per hour)
N/A
Class F
Protection level Standard: Semi-sealed/vented,
Option: sealed
Sealed Standard: Semi-sealed/vented,
Option: sealed
General Attributes
Switching
10A (16A for Semi-sealed "E" type)
8A 10A
10A (NO contacts)
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Max. switching capacity
(resistive load)
Standard: Semi-sealed/vented,
Option: sealed
1,200VA,240W2,000VA,150W 1,200VA, 240W
2,500VA, 240W (-25 type)
1,250VA,150W (NO)
375 VA, 90W (NC)
NEW! NEW!
Approved standards UL, CSA, TUV, VDEUL, CSA, VDE UL, CSA, VDE UL, CSA, VDE
ECbodyREADERS.indd 11 ECbodyREADERS.indd 11 7/14/06 11:22:22 PM7/14/06 11:22:22 PM
Relays - Power PCB
12
Relays - Power PCB
G6C G5PA-1 G8PTG5CA
Minimum permissible load
(for reference only)
Features
Operating temperature
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Insulation class
Contact type(s)
Contact material(
s)
Coil Information
Coil voltage
Power consumption
Terminal choices
Accessories
Approved standards
Contact Information
Contact form
UL, CSA, SEV, SEMKO, IEC/TUV
PCB
Optional: PCB+quick-connect
contact terminals
-25 to +70ºC
1 Form A
Single button
AgSnIn
4.5kV
Class B
• Fully sealed or flux-sealed
• High capacity versions
• High sensitivity types
• PCB or PCB+QC versions
5, 12, 24VDC
100mA @ 5VDC
200mW (standard & high
capacity)
150mW (high sensitivity)
100,000:
10A @ 30VDC
15A @ 110VAC (high capacity)
10A @ 250VAC (fully sealed, std)
300,000:
10A @ 250VAC (semi-sealed)
N/A
UL, CSA, VDE, SEV
PCB, self clinching
-40 to +70°C
1 Form A + 1 Form B, 1 Form A
Single button
Ag-Alloy
4.5kV
• Low power consumption for
high power switching
• Low profile 10A power relay
• Single & dual coil latching
types available
• Sealed construction available
• Meets EN tracking resistance
CTI > 250
3, 5, 6, 12, 24VDC
10mA @ 5VDC
200mW (monostable & single
coil latching)
280mW (dual coil latching)
100,000: 10A @ 30VDC/250VAC
Socket for QC contact terms.,
PCB terms., socket clip
Class A
UL, CSA, SEMKO TUV, VDE
PCB
-40 to +70°C
1 Form A
Single button
AgSnO2
10kV
12kV
• Ideal for TVs, tuner, & audio
power supply switching, both
front panel and remote
controlled. Also auxiliary
switched power outlets on
tuners and TVs.
• A variety of versions in a
single standard package meet
most UL/FCC power isolation
requirements
• Rated to 100A inrush @ 250
VAC for minimum
40,000 operations
5, 6, 9, 12, 24 VDC
(4.5 VDC non-standard)
10mA @ 5 VDC
250mW
530mW (high capacity,
extended electrical life)
150mW (under development)
30,000: 54@277 VAC 5A @
30VDC / 277VAC (high capacity type)
25,000: TV-5 TV-8 (optional)
6,000: 5A @ 30VDC
100,000: 10A @ 250 VAC
(high-capacity type)
N/A
Class B
2,500VAC (coil-contact)
1,000VAC
(open contacts)
2,000VAC (coil -contact)
2,000VAC (contacts pole-pole)
1,000VAC (open contacts)
4,000VAC (coil-contacts)
1,000VAC (open contacts)
Protection level Semi-sealed
Fully sealed option
Semi-sealed
Fully sealed option
Semi-sealed
General Attributes
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Max. switching capacity
(resistive load)
2,500VA, 300W2,500VA, 300W
2,000VA, 240W (latching)
N/A
UL, CSA, VDE
PCB (optional self-clinching)
PCB coil /quick connect contact
Flange mount all quick connect
Dimensions mm (in) 11 H x 16 L x 22 W (10A)
(0.43 x 0.63 x 0.87)
11 H x 22 L x 25 W (15A)
9.91 H x 20.07 L x 14.99 W
(0.39 x 0.79 x 0.59)
25 H x 24 L x W 10
(0.985 x 0.95 x 0.40)
Multiple, refer to catalog. Basic:
20.1(H)x 32.1(L) x 27.7(W)
-55°C to +105°C
1 Form A, 1Form C
Single button
AgSnIn (other alloys available)
6kV
5, 9, 12, 24, 48, 110VDC
Other coil voltages available
500mA @ 5VDC
900mW
100,000: 30A @ 277VAC (NO)
50,000: 30A @ 277VAC (NC)
Consult catalog for other ratings
N/A
Class F
2,500VAC, (coil-contact)
1,500VAC, (open contacts)
Switching 10A (15A high capacity)10A 5A (10A option) 30A (SPST)
10A-30A (SPDT)
1 Form A: 7,500VA, 560W
1 Form C: 5000/2500VA, 560W/280W*
Open frame, Vented/semi-sealed,
Fully sealed
• Industry standard form with
30A switching
• UL Class F insulation standard
• Wide range of coil ratings
• Various sealing forms: open
frame, vented/flux sealed, fully
sealed
• UL508/UL873 Column A
spacings
• Meets EN Tracking resistance
CTI > 175
• High dielectric at open contacts
NEW TYPES
* N.O. Contact / N.C. Contact
ECbodyREADERS.indd 12 ECbodyREADERS.indd 12 7/14/06 11:22:28 PM7/14/06 11:22:28 PM
Relays - Power PCB
Relays - Power PCB
13
G2R G5RL G2RL-TPG2RL
Dimensions mm (in)
Minimum permissible load
(@1800 ops./hr.)
Features
Operating temperature
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Insulation class
Contact type(s)
Contact material(
s)
Coil Information
Coil voltage
Power consumption
Terminal choices
Accessories
Approved standards
Contact Information
Contact form
UL, CSA, VDE
PCB
15.7 H x 28.8 L x 12.5 W
(0.61 x 1.14 x 0.49)
-40 to +70°C (AC coil)
-40 to +85°C (DC coil)
1 Form C
Single button
AgSnIn
10kV
• High dielectric due to large
internal creepage distances.
• AC coil in industry standard
package
24, 100, 115/120, 200, 230/240 VAC
5, 12, 24, 48VDC
40mA @ 24VDC
0.75VA
400mW (430mW @ 48VDC)
50,000: 16A @ 24VDC/277VAC (NO)
25,000: TV-5 (NO)
N/A
—
6,000VAC (coil-contact)
1,000VAC
(open contacts)
Protection level Semi-sealed
General Attributes
Switching 16A max. (NO), 5A max. (NC)
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Max. switching capacity
(resistive Load)
4,000VA, 384W (NO)
1,250VA, 120W (NC)
UL, CSA, EN 60335
PCB (coil terminals)
Quick-connect (contact terminals)
15.7H x 40.4 L x 12.5 W
(0.61 x 1.60 x 0.49)
-40 to +105°C
1 Form A
Single button
Ag alloy
10kV
12, 24VDC
Consult catalog for other coil
voltages
4,000VA,
400mW (430mW for 48VDC)
50,000: 16A @ 24VDC/277VAC
20A @ 24 VAC (@ 85ºC)
25,000: TV-5
N/A
Class F
5,000 VAC, (coil-contact)
1,000 VAC, (open contacts)
16A max.
—
Semi-sealed
• Increased temperature &
insulation ratings in low profile
package.
• Simplifies PCB design by allowing
removal of high power PCB
tracings.
• Contact/load terminals in both
5mm for RAST5 connection &
7.5mm existing standard
• Single mounting/soldering
process for both types of terminals
reduces PCB assembly costs.
UL, CSA, SEV SEMKO, VDE, TUV
PCB, plug in
quick-connect (flange mount)
25.5 H x 29 L x 13 W
(1 x 1.14 x 0.51)
-40 to +70°C (+85°C option)
1 Form A, 1 Form C, 2 Form A,
2 Form C
Single button, bifurcated button
Ag alloy
10kV
• High dielectric withstand
• 8mm coil/contact spacing
• 1 & 2 pole models
• 3mm contact gap version
available (see G2RG)
• Meets EN tracking resistance
CTI > 250
12, 18, 24, 48, 50, 100, 110/120,
110, 120, 200/220, 220, 230, 240VAC
5, 6, 9, 12, 18, 24, 48,60, 100,
110VDC
1 pole: 100mA @ 5VDC;
2 pole: 10mA @ 5VDC
0.9VA, 530mW (standard)
360mW (high sensitivity)
850mW (latching set),
600mW (latching reset)
100,000: (high-capacity type)
16A @ 30VDC/250VAC
Consult catalog for other ratings
N/A
Class B available
UL, CSA, VDE
PCB, optional quick-connect
contact terminals (-TP type)
15.5 H x 29 L x 12.7 W
(0.61 x 1.14 x 0.50)
-40 to +85°C
1 Form A, 1 Form C, 2 Form A,
2 Form C
Single button (bifurcated available)
AgSnO2 (1 pole); AgNi (2 pole)
10kV
• Low profile for power rating
• High isolation
• Class F insulation option
• Low power consumption
• Quick connect terminal option
• Meets EN tracking resistance
CTI > 250
5, 12, 24, 48VDC
40mA, 24VDC
400mW (430mW for 48VDC)
5,000VAC (coil-contact)
1,000 VAC
(open contacts)
5,000VAC (coil-contact)
1,000 VAC
(open contacts)
N/A
Class F
Semi-sealed
Fully sealed option
16A max. 16A max.
Semi-sealed
Fully sealed option
4,000VA, 480W (high-capacity 1 pole)
Consult catalog for other ratings
4,000VA, 384W (high-capacity 1 pole)
Consult catalog for other ratings
100,000: 16A @ 250VAC
6,000: 25A @ 240VAC
Consult catalog for other ratings
NEW! NEW!
ECbodyREADERS.indd 13 ECbodyREADERS.indd 13 7/14/06 11:22:44 PM7/14/06 11:22:44 PM
Relays - DC Power
14
Relays - DC Power
G9EA G9ECG9EB
General Attributes
The switching and driving sections are isolated, gas injected and hermetically sealed.
This advanced construction requires no arc space, saves space, & helps ensure safety.
Yes
Yes
Model
Classification
Features
Contact Information
Contact Form
Contact structure
Contact resistance
Switching voltage drop
*Electrical endurance
Max. switching current
Rated carry current
Short-time carry current
*Max. interruption current
*Overload interruption
Reverse polarity
interruption
Coil Information
Rated voltage
Power consumption
Mechanical endurance
Insulation resistance
Between Coil &
Contacts
Between contacts of
the same polarity
Dielectric strength
Between coil &
contacts
Between contacts of
the same polarity
Impulse withstand voltage
Ambient operating
temperature
Terminals
Screw terminals
Lead wire output
*When using a varistor as protective circuit against reverse surge in the relay coil
G9EC-1(-B)
Switching/current conduction
Largest capacity in series
Carries/switches 400V,
200A loads
SPST-NO
Double-break, single
30mΩ max. (0.2mΩ typical)
0.1V max. (for a carry current of 200A)
400VDC, 200A,
3,000 operations min.
200A
200A
300A (15min.)
1,000A @ 400VDC (10 times)
700A @ 400VDC (40 times min.)
-200A @ 200VDC
(1,000 times min.)
12, 24, 48, 60 & 100VDC
Approx. 11W
200,000 operations min.
1,000MΩ min.
1,000MΩ min.
2,500VAC for 1min.
2,500VAC for 1min.
4,500V
-40 to +50°C
(with no icing or condensation)
G9EA-1(-B)
Switching/current conduction
Standard compact model
carries/switches 400VDC, 60A loads
SPST-NO
Double-break, single
30mΩ max. (0.6mΩ typical)
0.1V max. (for a carry current of 60A)
120VDC, 100A, 3,000 operations min.
400VDC, 60A, 3,000 operations min.
400VDC, 30A, 30,000 operations min.
100A
60A
100A (10 min.)
600A @ 300VDC (5 times)
180A @ 400VDC (100 times min.)
-60A @ 200VDC (1,000 times min.)
12, 24, 48, 60 & 100VDC
Approx. 5 to 5.4W
200,000 operations min.
1,000MΩ min.
1,000MΩ min.
2,500VAC for 1min.
2,500VAC for 1min.
4,500V
-40 to +70°C
(with no icing or condensation)
G9EA-1(-B)-CA
High-current conduction
Carries 100A
Low contact resistance when
carrying curren
t
SPST-NO
Double-break, single
10mΩ max. (0.3mΩ typical)
0.1V max. (for a carry current of 100A)
400VDC, 30A, 1,000 operations min.
120VDC, 30A, 2,500 operations min.
30A
100A
150A (10 min.)
—
100A @ 120VDC (150 times min.)
—
12, 24, 48, 60 & 100VDC
Approx. 5 to 5.4W
G9EB (-1B)
Switching/current conduction
Smallest in series
250VDC, 25A loads
SPST-NO
Double-break, single
30mΩ max.
0.1V max (for a carry current of 25A)
250VDC, 25A,
30,000 operations min.
25A
25A
50A (5 min.), 40A (10min.)
100A @ 250VDC (5 times)
50A @ 250VDC (50 times min.)
—
12, 24, 48, 60 & 100VDC
Approx. 2W
100,000 operations min.
1,000MΩ min.
1,000MΩ min.
2,500VAC for 1min.
2,500VAC for 1min.
4,500V
200,000 operations min.
1,000MΩ min.
1,000MΩ min.
2,500VAC for 1min.
2,500VAC for 1min.
4,500V
-40 to +70°C
(with no icing or condensation)
-40 to +70°C
(with no icing or condensation)
Yes
Yes
Yes
Yes
Yes
Yes
ECbodyREADERS.indd 14 ECbodyREADERS.indd 14 7/14/06 11:22:49 PM7/14/06 11:22:49 PM
Relays - General Purpose
Relays - General Purpose
15
MY4H MY LYMK
Insulation class
Approved standards
Contact Information
Contact form
UL, CSA, TUV, VDE, SEMKO
2 Form C, 3 Form C
N/A
UL, CSA
4 Form C
—
UL, CSA, SEV, CE, VDE, IMA
2 Form C, 4 Form C
Class A
UL, CSA, SEV, VDE, CE
(UL, CSA only with varistors)
Dimensions mm (in) 52.58 H x 34.54 L x 34.54 W
(2.07 x 1.36 x 1.36)
35 H x 28.5 L x 22 W
(1.38 x 1.12 x 0.87)
36 H x 28 L x 21.5 W
(1.42 x 1.10 x 0.85)
35.56 H x 27.94 L x 21.59 W
(1.40 x 1.10 x 0.85)
1 Form C, 2 Form C,
3 Form C, 4 Form C
Class A
Terminal choices Plug-inPlug-in PCB, plug-in Track mounted socket PCB
with .187/.250 QC
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
100,000 min.
10A @ 28VDC/250VAC
100,000 min.
3A@24VDC/110VAC
(50,000 min. bifurcated)
2P 500,000: 5A @ 30VDC/250VAC
4P 200,000: 3A @ 30VDC/250VAC
100,000: 3A@30VDC/250VAC
(bifurcated)
200,000 min:
15A @ 24VDC/110VAC
10A @ 24VDC/110VAC
500,000 min: (2 pole)
10A @ 110VAC
Contact material(
s) Ag (fine silver)AgSnIn AgNi Ag-Alloy
Power consumption 2.7VA, 1.5W900 mW; 0.9 - 1.1VA AC Coil: 0.9 to 1.2VA
DC Coil: 0.9W
1.1VA, 0.9W (1 pole);
1.1VA, 0.9W (DPDT);
1.6VA, 1.4W (3PDT);
1.95VA, 1.5W (4PDT)
Minimum permissible load
(@1800 ops./hr.)
100mA @ 1VDC100µA @ 1VDC for MY4H
100µA @ 100mVDC for MY4ZH
(Bifurcated contacts)
2 pole: 1mA @ 5VDC
4 pole: 1mA @ 5VDC
10µA @ 1 VDC (bifurcated con
tacts)
100mA @ 5VDC
10mA @ 5VDC (bifurcated contacts)
Accessories Sockets & clips for track
mount sockets with screw
terminals, & back connecting
sockets with solder & PCB
terminals
PYF14A-E Socket
PYC-A1 Clip
Sockets & clips for track
mount sockets with screw
terminals, & back connecting
sockets with solder & PCB
terminals. Note: PYF-S series
screwless clamp terminal socket
available Mounting rails= PFP
Sockets & clips for track
mount sockets with screw
terminals, & back connecting
sockets with solder & PCB
terminals
General Attributes
Switching 10 A max.
3A 10A (2 pole);
5 A (4 pole)
15A
Features • Octal base plug-in
• Exceptional reliability
• Push-to-test button standard
• CENELEC conformity
• Full hermetic seal for
hazardous applications
• UL Class1, Division II approved
• Signal level switching option
using bifurcated contacts
• Exceptional reliability
• Push-to-test button standard
• Arc barrier built into 4 pole
• Built in diode (DC) or C/R
Circuit
• Name plate and mechanical
indicator, standard
• Compact power relay
• LED, Push-to-test button,
bifurcated contacts and other
features available
• Space efficient power switching
• Extended life to
500,000/200,000 operations
Contact type(s) Single buttonSingle button, bifurcated button Single button, bifurcated button Single button, bifurcated
2,500VAC (coil-contact)
1,000VAC (open contacts)
1,000VAC (coil-contact)
1,000VAC (contacts pole pole)
700VAC (open contacts)
2,000VAC (coil-contact)
1,000VAC (open contacts)
2,000VAC (coil-contact)
1,000VAC (open contacts)
Dielectric strength
(50/60 Hz for 1 minute)
Coil Information
Coil voltage
12, 24, 110/120, 220/240VAC;
12, 24, 48, 100VDC
24, 110/120VAC
12, 24VDC
6, 12, 24, 48, 110/120,
220/240 VAC;
6,12, 24, 48, 100/110VDC
12, 24, 110/120, 220/240VAC,
12, 24, 48, 100VDC
Operating temperature -10°C to +40°C-25°C to +60°C -55°C to +70°C -25°C to +70°C
Characteristics
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
———
—
Max. switching capacity
(resistive load)
2,500VA, 280W330VA, 72W 2,500VA, 300W
1,250VA, 150W (4-pole)
1,700VA, 360W (1 pole)
1,100VA, 240W (2, 3, 4 pole)
550VA, 120W (bifurcated)
Protection level Unsealed
Hermetic seal Unsealed
Unsealed, semi-sealed
ECbodyREADERS.indd 15 ECbodyREADERS.indd 15 7/14/06 11:22:57 PM7/14/06 11:22:57 PM
Relays - General Purpose
16
Relays - General Purpose
G2R-S (S) G7LG7J
Dimensions mm (in)
Minimum permissible load
(@1800 ops./hr.)
Features
Operating temperature
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Insulation class
Contact type(s)
Contact material(
s)
Coil Information
Coil voltage
Power consumption
Terminal choices
Accessories
Approved standards
Contact Information
Contact form
UL, CSA, TUV, CE, IEC
Quick-connect, screw, PCB
64 H x 53.5 L x 34.5 W
(2.52 x 2.11 x 1.36)
-25ºC to +60°C
4 Form A, 3 Form A/1 Form B,
2 Form A/2 Form B
Single button
Ag Alloy
10kV (coil-contacts)
Class A, Class B (available)
• Variety of contact forms
• Ideal for 3 phase motor control
• 4 pole mini contactor
• DIN rail mountable
• Minimal chattering
• UL94V-0
100mA @ 24VDC
6, 12, 24, 48, 100/110VDC;
6, 12, 24, 50, 100/120,
200/240VAC
1.8 to 2.6VA, 2.0W
100,000 min. (at rated loads)
(see data sheet for more information)
R99-04V for G5D W-bracket
UL, CSA
Plug-in
35.5 H x 29 L x 13 W
(1.40 x 1.14 x .51)
-40 to +70°C
1 Form C
2 Form C
Single button, bifurcated crossbar
Ag Alloy
8kV
• Nameplate and mechanical flag
indicator standard
• LED diode, and lockable test
button option available
• Socket mount 10A relay (1-pole)
100mA @ 5VDC ,
10mA @ 5VDC (2 pole)
6, 12, 24, 48VDC;
24, 110 120, 230, 240VAC
0.9VA, 0.53W
100,000 min. (at rated loads)
(see data sheet for more information)
Sockets for track mount, sockets
with screw terminals, & back
connecting sockets with solder &
PCB terminals. Note: P2RF-S series
screwless clamp terminal socket
available. SSR option: G3R.
Class A
UL, CSA, TUV, CE, VDE available
Quick-connect, screw, PCB
49.02 H x 68.58 L x 34.54 W
(1.93 x 2.70 x 1.36)
-20ºC to +85°C
1 Form A-(Double Make)
2 Form A-(Double Make)
Single button
Ag Alloy
10kV (coil-contacts)
• Reliable high power relay
• 3 mm contact gap
• Conforms to IEC 950/UL 1950
• Class B insulation standard
• Most cost effective solution in
its class.
• Ideal for pump, motor loads
100mA @ 5VDC
12, 24, 48, 100VDC;
12, 24, 100/120, 200/240VAC
1.7 to 2.5VA, 1.9W
100,000 min. (at rated loads)
(see data sheet for more information)
R99-07G5D E bracket;
P7LF-D adapter;
P7LF-06 front connecting socket
Class B
4,000VAC (coil-contacts)
4,000VAC (different polarity)
2,000VAC (open contacts)
1 pole: 5,000VAC (coil-contacts)
1,000VAC (open contacts)
2 pole: 5,000VAC (coil-contacts)
3,000VAC (different polarity)
1,000VAC (open contacts)
4,000VAC (coil-contacts)
2,000VAC (different polarity)
2,000VAC (open contacts)
Protection level Unsealed
Semi-sealed
Unsealed Unsealed
Semi-sealed
General Attributes
Switching 25A max.
1 pole: 10A max.
2 pole: 5A max.
30A max.
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Maximum
switching capacity
5,500VA, 750W (NO contacts)
1,760VA, 240W (NC contacts)
2,500VA, 300W
(1-pole resistive load)
4,400VA
G2RV
Relay: Quick-connect
Socket: screw terminals, push-in
wire connections (sold separately)
91.0 H x 94.0 L x 6.1 W
(3.58 x 3.7 x 0.24)
Relay & terminal block
-40ºC to +60ºC
1 Form C
Crossbar
Ag Alloy
6kV
•
Slimmest control relay available
•
Capable of switching both electrical
control loads (6A) and signal level
loads (1mA)
•
Relay available separately
•
Sealed for unprotected environments
5mA @ 5VDC
12, 24, 48VDC
24, 48, 110, 230VAC
300mW
6,000: 6A @ 30 VDC /250VAC
Socket: G2RV-SL (UL 508)
SSR Option: G3MB / G3MC
Class A
4,000VAC (coil-contacts)
1,000VAC (open contacts)
Semi-sealed
6A max.
1,500VA, 18W (resistive load)
NEW!
UL, CSA, VDE, IEC, LR, CE
ECbodyREADERS.indd 16 ECbodyREADERS.indd 16 7/14/06 11:23:10 PM7/14/06 11:23:10 PM
Relays - General Purpose
Relays - General Purpose
17
G7Z MGN MJN
MJN
Dimensions mm (in)
Minimum permissible load
(@1800 ops./hr.)
Features
Operating temperature
Electrical service life
(@ 1800 ops./hr.)
(resistive load)
Impulse withstand voltage
(1.2 x 50µ sec. unless noted)
Insulation class
Contact type(s)
Contact material(
s)
Coil Information
Coil voltage
Power consumption
Terminal choices
Accessories
Approved standards
Contact Information
Contact form
UL, CSA
Quick-connect plug-in
48.38 H x 35.56 L x 38.73 W
(1.91 x 1.40 x 1.53)
-45ºC to +60°C (1 & 2 pole AC coil), + 70°C (DC coil)
-45ºC to +45°C (3 pole AC coil)
-45ºC to +70°C (3 pole DC coil)
1 Form C, 2 Form C, 3 Form C (monostable);
1 Form C, 2 Form C (latching/unlatching)
Single button
3/16” diameter AgCdO2
N/A
Class A
• Rugged power driver offers superior 3/16”
through-air & 3/8” over-surface spacing
• Interlocked frame & contact block prevent
contact misalignment during plug-in
• Indicator lamp, push-to-operate options
• 10A-30A in same package
• Continous duty at 125% coil voltage
N/A
6, 12, 24, 120VAC
5, 6, 12, 24, 48, 110VDC
AC 1.7VA (1, 2PDT)
2.0VA (3PDT DC 1.2W
100,000 min.
10A @ 28VDC/240VAC
20A @ 28VDC/277VAC
30A @ 28VDC
PTF11PC Socket; PTF11QDC Socket; PTF21PC
Socket;
PTFPCB Socket; PYMJN-PCB Retaining Clips;
PYMJN-S Retaining Clips
UL, CSA, TUV, VDE
Screw
84 H x 62 L x 45 W
(3.31 x 2.44 x 1.77)
-25ºC to +60ºC
4A, 3A/1B, 2A/2B
Bifurcated Crossbar
AgSnIn
10kV (coil to contacts or different polarity)
4.5kV (open contacts)
• Each pole able to switch and carry 40A in
parallel
• Capable of switching up to 160A
• Reduced power consumption & size
• Low noise
• Safety function included as standard
• Optional auxiliary contact block enables
concurrent signal (1mA) switching
2A @ 24VDC
<1mA @ 5VDC (auxiliary contact block)
12, 24VDC
3.7W
100,000: 5A @ 110VDC (at 1,2000 ops/hr)
80,000: 40A @ 440VAC
Auxiliary Contact Block (2 poles of 4 poles)
Signal level switching capability (2 poles of
4 poles)
Class B
750VAC, rms 60Hz across open contacts;
2,500VAC, rms 60Hz all other mutually
insulated elements
4,000VAC (coil-contacts)
4,000VAC (different polarity)
2,000VAC (open contacts)
Protection level Semi-sealed
Unsealed, fully sealed
General Attributes
Switching 10A, 20A, 30A (UL ratings)
(see: Electrical service life)
40A max. (160A max. in parallel)
Dielectric strength
(50/60 Hz for 1 minute)
Characteristics
Max. Switching Capacity
(resistive load)
N/A17,600VA, 550W
440VA, 110W
(auxiliary contact block)
UL
Screw
Short Base: 55.88 H x 63.50 L x 63.50 W
(2.20 x 2.50 x 2.50)
Long Base: 60.45 H x 84.33 L x 63.50 W
(2.38 x 3.32 x 2.50)
At 30Amps:
-45ºC to +80°C (AC coil)
-45ºC to +115°C (DC coil)
1 Form A, 1Form B, 1Form C, 2 Form A,
2 Form C (long base)
Single button
5/16” diameter AgCdO2
N/A
• 30 Amp heavy duty power relay
• Class F coil insulation system for 155°C
(total temperature)
• Coil molded in DuPont Rynite® for
environmental protection
•
Rugged construc tion rivets terminals
to base
• Magnetic blow-out option
N/A
6, 12, 24, 120, 240, 480VAC;
6, 12, 24, 48, 110VDC
9.5VA nominal; 2W nominal
100,000 min.
30A @ 28VDC/240VAC
Aluminum dust cover - sealed knock-out holes
for standard conduit fittings. Relay mounts on
pre-drilled base. Snap action cover release
127 W x 76.20 H x 101.60 D (5 x 3 x 4)
Class F
2,200Vrms, 60Hz between contacts;
2,200Vrms, 60Hz between other elements
None
30A max.
N/A
NEW!
ECbodyREADERS.indd 17 ECbodyREADERS.indd 17 7/14/06 11:23:25 PM7/14/06 11:23:25 PM
Relays - Solid State
18
Relays - Solid State
Dimensions mm (in) 13.5 H x 24.5 L x 4.5 W
(0.53 x 0.96 x 0.18)
20.5 H x 24.5 L x 5.5 W
(0.81 x 0.96 x 0.22)
Input & Output modules:
28 H x 29 L x 13 W
(1.10 x 1.14 x 0.51)
12.5 max. H x 18.5 L x 6.5 W
(0.49 x 0.73 x 0.26) max.
Approvals UL, CSA, VDE
UL, CSA, TUV UL, CSA, TUV UL, CSA
Isolation PhototriacPhototriac Photocoupler, Phototriac Phototriac
Life (MTTF) 100,000 hours100,000 hours 100,000 hours 100,000 hours
Features •Reduced height thin profile SIP
• Ideal for close PCB mounting
• Monoblock construction results
in ultimate reliability
• Industry standard footprint
• Space saving SIP design
• Industry standard footprint
• Monoblock construction results
in ultimate reliability
• 4 kV insulation
• Operation indicator standard
• Interchangeable with G2R
electromechanical relay
• Ideal for DIN rail mount I/O
operations
• AC/DC & AC half-wave
switching with one model
• 10µA max. leakage current
• Matches G6D form factor
Snubber circuit Yes
Optional Input module: No;
Output module
Yes (Built-in Varistor)
Zero crossing Yes
Optional Input module: No;
Output module: Yes
No
Dielectric strength
(50/60Hz for 1 min.)
2,500VAC2,500VAC 4,000VAC 2,500VAC
Socket N/AN/A P2RF-05E P6D-04P
Optional heat sink N/A
N/A N/A N/A
Equivalent Omron
EMR footprint
G2RV similar for terminal block
G2RV similar for terminal block G2R
G3MB G3R I/O G3DZG3MC
General Attributes
Switching
current (resistive)
2A @ 240VAC 2A @ 240VAC Input module: 100mA;
Output module: 2A
0.6A @ 240VAC
PCB PCB Plug-in PCB
Terminal
Mounting
PCB
PCB Socket PCB or Socket
G6D, G6DS
Output voltage 75-264VAC75-264VAC Input module: 4-32VDC;
Output module:
75-264VAC, 4-200VDC
5, 12, 24VDC
Operating input 5, 12, 24VDC5, 12, 24VDC Input module: 5VDC;
6.6-32VDC; 60-264VAC;
Output module: 4-32VDC
5, 12, 24VDC
Operating temperature -30ºC to +80°C
-30ºC to +80°C -30ºC to +80°C -30ºC to +85°C
SIP SIP DIP DIP
Leakage Current
(max.) 1.5mA (at 200VAC) 1.5mA (at 200VAC)
Input Module: 5µA
Output Module: 1.5mA (AC)
1mA (DC)
10µA (at 125VDC)
ECbodyREADERS.indd 18 ECbodyREADERS.indd 18 7/14/06 11:23:32 PM7/14/06 11:23:32 PM
Relays - Solid State
Relays - Solid State
19
G3S/G3SD G3M G3TBG3CN
Isolation
Snubber circuit
Zero crossing
No
Phototriac
Photocoupler
Optional
Phototriac (G3S)
Photocoupler (G3SD)
No
Yes (Built-in Varistor)
Phototriac
Optional
Yes
Dimensions mm (in) 26H x 33H x 14 W
(1.04 x 1.30 x .55) max.
16.5 H x 20 L x 10 W
(0.65 x 0.79 x 0.39)
20 H x 40 L x 9 W
(0.79 x 1.58 x 0.35)
Input module:
20.5 H x 43.5 L x 10 W
(0.81 x 1.70 x 0.39)
Output module:
30.5 H x 43.5 L x 10 W
(1.20 x 1.70 x 0.39)
Photocoupler
Input module: No;
Output module: Yes
Input module: No;
Output module: Yes
Approvals UL (114), CSA (22.2)
UL, CSA UL, CSA, TUV UL, CSA
Life (MTTF) 100,000 hours100,000 hours 100,000 hours 100,000 hours
Features • Flat & vertical packages
• Ideal for FA & OA equipment
• AC and DC models available
• Socketable
• Heatsink, available
• Interchanges with G6B SPST
electrical mechanical relay
• Multi-input SSR
• Space-saving SIP design
• Ideal for high density Power
PCB applications
• High current switching
capability
• Color-coded input &
output modules
• Industry standard footprint
• 4kV dielectric strength
• LED indicator
Dielectric strength
(50/60Hz for 1 min.)
2,500VAC2,500VAC 2,000VAC (2A versions)
2,500VAC (3A and 5A versions)
4,000VAC
Socket N/AP6B-04P (PCB) N/A N/A
Optional heat sink N/A
Y92B-S08N N/A N/A
General Attributes
Switching
current (resistive)
(max.)
2A, 3A, @ 53VDC, 26VAC1A @ 240VAC
(1.2A, G3S-PD & heatsink)
(1.1A, G3SD-PD & heatsink)
2, 3A, 5A @ 250VAC Input module: 25mA @ 4 to 32VDC
Output module: 3mA max. @ 5 to 48VDC
3mA max. @ 100 to 240 VAC
1.5 max. @ 48 to 200 VDC
PCBPCB PCB PCB
Terminal
Mounting
PCB
PCB or Socket PCB PCB
Equivalent Omron
EMR footprint
N/A
G6B N/A N/A
Output voltage 75~264VAC
3~53VDC
5, 12. 24VDC 75-264VAC Input module: 4-32VDC;
Output module:
75-264VAC, 4-200VDC
Operating input 5, 12, 24; 3~28VDC5, 12, 24VDC 5, 12, 24VDC Input module:
80-264VAC, 3-32VDC;
Output module: 3-32VDC
Operating temperature -30°C to +80°C
-30°C to +80°C -30°C to +80°C -30°C to +85°C
SIP SIP SIP SIP
Leakage Current
(max.)
2mA (G3S)
0.1mA @ 26VDC (G3S)
2.5/5mA 2mA @ 100VAC/5mA @ 200VAC
(2Amp versions)
1.5mA @ 200VAC (3 & 5 Amp versions)
Input module: 100µA max.
Output module: 5mA @ 200VAC (AC)
1mA max. (DC)
ECbodyREADERS.indd 19 ECbodyREADERS.indd 19 7/14/06 11:23:38 PM7/14/06 11:23:38 PM
Relays - Solid State
20
Relays - Solid State
G3TC G3NAG3NE
Dimensions mm (in)
Features
11.5 H x 47 L x 37.5 W
(0.45 x 1.90 x 1.50)
• High capacity
• Panel Mount
• Quick-connect terminals
31.8 H x 43.2 L x 15.2 W
(1.25 x 1.7 x 0.6)
• Color-coded modules
• Industry standard footprint
• Built-in anchor screw
• Optical isolation – Dielectric 4kV
• Zero cross on AC output
modules
27 H x 58 L x 43 W
(1.06 x 2.28 x 1.69)
• Ideal for industrial controls &
commercial cooking
• "Hockey Puck" standard
• Operation indicator standard
General Attributes
Switching
current (resistive)
(max.)
20A max.@ 240VAC
(264VAC max.)
Input Module:
12mA, 15mA, or 18mA
(depending on model)
Output Module:
3A (1A on DC output models
rated< 200VDC)
Versions range from 10A
to 90A max. (when using heat
sink)
Output voltage 75-264VACInput Module: 4.5-6VDC,
12-18VDC, 20-30VDC
Output Module: 75-140 VAC,
75-280VAC, 5-60 VDC,
5-200VDC
19 - 264VAC
180 - 528VAC
4 - 220VDC (10A model)
400 - 600VAC (10, 25, 50A
models)
Operating input 5, 12, 24VDCInput Module:
90-140VDC/AC, 180-280 VDC/AC,
10-32VDC/AC
Output Module:
5, 15, 24VDC
4-32VDC; 75-264VAC
Operating temperature -30ºC to +80°C
-30ºC to +80°C -30ºC to +80°C
SIP Quick Connect Quick Connect
G3PA/B
Consult Omron
• Built-in heat sink increases
life and reliability
• Voltage turn-on at zero cross-
ing reduces initial inrush load
currents
• LED indicator when control
power applied
Isolation
Life (MTTF)
Mounting
Snubber circuit
Dielectric strength
(50/60Hz for 1 min.)
Zero crossing
Approvals
Socket Mounting plate
UL, CSA, TUV
100,000 hours
Plug-in
Yes (built in varistor)
2,000VAC
Phototriac
Optional
N/A
UL, CSA, TUV, CE
100,000 hours
PCB with anchor screw
4,000VAC
AC Input, DC Input, DC Output:
Photocoupler
AC Output: Phototriac
Yes (AC output
modules only)
Yes (AC output
modules only)
Mounting plate
UL, CSA, TUV
100,000 hours
Panel
2,500VAC
4000VAC (75 and 90A models)
Phototriac, Photocoupler
Yes
Yes
Quick connectPCB Screw
Optional heat sink Y92B-N50, -N100
N/A Y92B-A , -B , -P
Equivalent Omron
EMR footprint
N/A
N/A N/A
Terminal
PFP-xxx
UL, CSA, TUV, VDE
100,000 hours
Panel, DIN
G3PA: 4,000VAC
G3PB: 2,500VAC
Phototriac
Yes
Yes
Screw
N/A
N/A
up to 45A
75 - 264VAC
180 - 528VAC
12-24VDC
-30ºC to +80°C
Leakage Current
(max.)
Input Module: 100µA
AC Output Modules: 5mA @ 240VAC
2.5mA @ 120VAC
DC Output Modules: 1mA
2mA (at 100VAC)
5mA (at 200VAC)
5mA @ 100VAC
10mA @ 200VAC
20mA @ 400VAC
10mA @ 200VAC
20mA @ 400VAC
ECbodyREADERS.indd 20 ECbodyREADERS.indd 20 7/14/06 11:23:44 PM7/14/06 11:23:44 PM
Sockets
Sockets
21
Relay Type Track Mount
Sockets
Back Connecting
Sockets
Solder terminals PCB terminals
Mounting Track Length
PFP-100N
PFP-50N
1 meter
.5 meter
Relay Type Mounting
Bracket
Adaptor
Track Mount/Panel Mount
Front Connecting
Socket
Track Mount/Panel Mount
G7J-(ALL)
G7L-1A-T
G7L-1A-TJ
G7L-1A-B
G7L-1A-BJ
G7L-2A-T
G7L-2A-TJ
G7L-2A-B
G7L-2A-BJ
R99-04-FOR-G5F W bracket
R99-07G5D E bracket
–
P7LF-D
–
P7LF-06
P7LF-06
–
–
P7LF-06
P7LF-06
–
–
Terminal Cover Socket Bridge
P&LE-C PYDM
G2R-1-S
G2R-2-S
G2RV
G6B
G6D
G6BK
G6BU
G6C-1, G6C-2
G6CK
G6CU
LY1, LY2
LY3
LY4
MK2
MK3
MY2
MY3
MY4
MY2K
MY4(Z)H
P2RF-05
P2RF-05-E
P2RF-05-S
P2RF-08
P2RF-08-E
P2RF-08-S
G2RL-SL500, -SL700
–
–
–
–
–
–
–
PTF08A-E
PTF11A
PTF14A-E
PFO83A-E
PF113A-E
PYF08A-E
PYF08A-N
PYF08-S
PYF11A
PYF14A-E
PYF14A-N
PYF14S
PYF14A-E
PYF14A-E
P2R-05A
P2R-08A
–
–
–
–
–
–
–
–
PT08
PT11
PT14
PL08
PL11
PY08
PY11
PY14
PY14
–
P2R-05P
P2R-08P
–
P6B-04P (1-pole), P6B-26P (2-pole)
P6D-04P
P6B-06P
P6B-04P
P6C-06P
P6C-08P
P6C-06P
PT08-0
PT11-0
PT14-0
PLE08-0
PLE11-0
PY08-02
PY11-02
PY14-02
PY14-02
–
NOTES: 1. -E and -N models are finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals.
2. -S types are screwless terminal styles.
ECbodyREADERS.indd 21 ECbodyREADERS.indd 21 7/14/06 11:24:03 PM7/14/06 11:24:03 PM
Designed to "Drop-In" Your Application.
Designed to "Drop-In" Your Application.
22
Contact Omron Components
and have it your way.
Configure a switch that
meets your application
needs.
Omron Electronic Components has a
great variety of standard options. We
can deliver a snap action switch that
will drop right into your application.
Saving you time, component counts,
& cost while improving your
products overall quality.
These options include:
Actuators:
• Long & short panel mount plungers
• Long & short spring plungers
• Hinge levers in various lengths &
orientation
• Roller levers in various lengths &
orientations
• Simulated roller
• Leaf
Termination styles:
• PCB
• Solder
• Quick Connect
• Screw
• Wire Leads
• Connector
Additional Features:
• Sealed / Unsealed versions available.
• Class N (200C) types available.
(D3V-T)
FP OP RP
TT
RT
OT
TTP
TTF
Total travel
position
Free
position
Operating
position
Releasing position
Center of switch mounting hole
OF RF
PT MD
Plunger & Lever Options
Terminal Options
ECbodyREADERS.indd 22 ECbodyREADERS.indd 22 7/14/06 11:24:09 PM7/14/06 11:24:09 PM
Z A X DZ
24.2 H x 17.45 D x 49.2 W
(0.95 x 0.69 x 1.93)
• General Purpose Snap Action
Switch
• High precision 15 A switch
available in a variety of styles
0.1A @ 125VAC
15A @ 250VAC*
SPDT
250g to 350g
Refer to “SPECIFICATIONS”
section of data sheet for detailed
service life information
Refer to "SPECIFICATIONS"
section of data sheet for detailed
service life information
25.4 (1.0)
Pin plunger, slim spring plunger,
short spring plunger, panel mount
plunger, panel mount roller
plunger, panel mount cross roller
plunger, hinge lever, low force
hinge lever, short hinge roller
lever, hinge roller lever,
unidirectional short hinge roller
lever, spring plunger, flexible rod
Solder, Screw
UL, CSA, SEV
24.2 H x 17.45 D x 49.2 W
(0.95 x 0.69 x 1.93)
• General Purpose Snap Action
Switch
• High capacity switch handles
loads with large inrush currents
20A @ 250VAC
SPDT
400g to 625g
1,000,000 ops. min.
(at rated OT load)
500,000 ops. min.
(at rated OT load)
25.4 (1.0)
Pin plunger, short spring plunger,
panel mount plunger, panel
mount roller plunger, panel
mount cross roller, short hinge
lever, hinge lever, short hinge
roller lever, hinge roller lever
Solder, Screw, or Quick connect
(#250)
UL, CSA, SEV
24.2 H x 17.45 D x 49.2 W
(0.95 x 0.69 x 1.93)
• DC switch
• Magnetic blowout to
extinguish arc
10A @ 125VDC
3 A @ 250VDC
SPDT
510g
1,000,000 operations min.
100,000 operations min.
25.4 (1.0)
Pin plunger, short spring plunger,
slim spring plunger, panel mount
plunger, panel mount cross-
roller plunger, panel mount roller
plunger, leaf spring, hinge lever,
hinge roller lever, short hinge
lever, short hinge roller lever
Solder, Screw
UL, CSA
22.7 H x 17.45 D x 49.2 W
(0.89 x 0.69 x 1.93)
• DPDT basic switch
• Incorporates two completely
independent built-in switches
• Can switch two independent
circuits operating on different
voltages
10A @ 250VAC
DPDT
570g
1,000,000 operations min.
500,000 operations min.
25.4 (1.0)
Pin plunger, hinge lever, short
hinge roller lever, hinge roller
lever
Solder, Screw
UL, CSA
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Contact form
Operating force (OF)*
Mechanical service life
Electrical service life
Mounting pitch mm (in)
Actuator types
Terminal choices
Approved standards
* Values are for pin plunger
type only
Switches - Snap Action
23
Switches - Snap Action
ECbodyREADERS.indd 23 ECbodyREADERS.indd 23 7/14/06 11:24:21 PM7/14/06 11:24:21 PM
Switches - Snap Action
24
Switches - Snap Action
TZ D3V V VX
32 H x 17.45 D x 49.2 W
(1.26 x 0.69 x 1.93)
• Stable operation at 400°C
ambient temperature
• High contact reliability
• Smooth operation
1A @ 250VAC
SPST
500g
100,000 operations min.
50,000 operations min.
25.4 (1.0)
Pin plunger, hinge lever, short
hinge roller lever, hinge roller
lever
Bolt
–
15.9 H x 10.3 D x 27.8 W
(0.63 x 0.41 x 1.09)
• Miniature Snap Action Switch
• Environmentally friendly: free
of beryllium copper & lead
• Maximum operating
temperature of 105°C
(standard versions)
• Internally or externally fitted
levers
• 200°C versions available (D3V-
T)
15.9 H x 10.3 D x 27.8 W
(0.63 x 0.41 x 1.09)
• Miniature Snap Action Switch
• Industry standard design with
15 A (V-15G) or 10 A (V-10G)
rating
• Cadmium-free contacts
• Internal lever options
15A @ 250VAC (V-15G)
10A @ 250VAC (V-10G)
SPDT, SPST-NC, SPST-NO
100g, 200g, or 400g (V-15G)
100g or 200g (V-10G)
50,000,000 operations min.
100,000 operations min. (V-15G)
300,000 operations min. (V-10G)
10.3 x 22.2 (0.41 x 0.87)
Pin plunger, short hinge lever,
hinge lever, long hinge lever,
simulated roller lever, short hinge
roller lever, hinge roller lever
Solder/Quick connect (#187)
Quick connect (#187), Quick
connect (#250), Short solder,
Screw
UL, CSA, SEV, VDE, SEMKO,
DENMARK
18.8 H x 10.3 D x 27.8 W
(0.74 x 0.41 x 1.09)
• Miniature Snap Action
• Low operating force
• High contact reliability
• 0.1 A to 5 A
5A @ 250VAC
0.1A @ 125VAC
SPDT, SPST-NO, SPST-NC
25g, 50g
50,000,000 (5A)
10,000,000 (0.A)
500,000 (5A )
1,000,000 (0.1A )
22.2
Pin plunger, short hinge lever,
hinge lever, long hinge lever,
simulated roller lever, short hinge
roller lever, hinge roller lever
Solder, Quick-connect (#187)
UL, CSA, VDE
21/16/11/6A @ 125/250VAC
0.1A @ 125VAC
SPDT, SPST-NC, SPST-NO
50g, 100g, or 200g
10,000,000 operations min.
100,000 operations min.
(D3V-16)
200,000 operations min.
(D3V-11)
500,000 operations min.
(D3V-6 / D3V-01)
–
Pin plunger, short hinge lever,
hinge lever, long hinge lever,
simulated roller lever, short
hinge roller lever, hinge roller
lever
Solder/Quick connect (#187)
Quick connect (#187)
Quick connect (#250)
UL, CSA, VDE, SEMKO
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Contact form
Operating force (OF)*
Mechanical service life
Electrical service life
Mounting pitch mm (in)
Actuator types
Terminal choices
Approved standards
* Values are for pin plunger
type only
ECbodyREADERS.indd 24 ECbodyREADERS.indd 24 7/14/06 11:24:24 PM7/14/06 11:24:24 PM
SS-P/SS SSG D3M D2F
10.2 H x 6.4 D x 19.8 W
(0.40 x 0.25 x 0.78)
•
Subminiature Snap Action Switch
• SS-01: Switches microcurrent/
microvoltage load with crossbar
contacts
•
SS-3: Single-leaf moveable spring
• SS-5: Split double spring
mechanism for a long life of up
to 30 million operations
• SS-10: Split double spring
mechanism for a long life of up
to 10 million operations
• Internal lever options
0.1A @ 125VAC (SS-01)
3A @ 125VAC (SS-3)
5A @ 125VAC (SS-5)
10.1A @ 125/250VAC (SS-10)
SPDT (SPST-NC, SPST-NO
per request)
25g, 50g, or 150g (SS-01)
150g (SS-3)
50g or 150g (SS-5)
150g (SS-10)
30,000,000 ops. min. (SS-01, SS-5)*
1,000,000 ops. min. (SS-01P, SS-3)
10,000,000 ops. min. (SS-10)*
200,000 operations min.
(SS-01, SS-5)**
70,000 operations min. (SS-3)
50,000 operations min. (SS-10)**
9.5 (0.37)
Pin plunger, hinge lever,
simulated roller lever, formed
hinge lever, hinge roller lever
SS-01, SS-3, SS-5: PCB (straight,
parallel left, parallel right),
Solder, Quick connect SS-10:
PCB (straight), Solder, Quick con-
nect (#110)
UL, CSA, EN
*at rated OT value
**at rated load
10.2 H x 6.4 D x 19.8 W
(0.40 x 0.25 x 0.78)
•
Subminiature Snap Action Switch
• SS-01: Switches microcurrent/
microvoltage load with crossbar
contacts
• SS-5: Split double spring
mechanism for a long life of up
to 30 million operations
• Wide operating temp. range of
-25 to + 125°C
• Internal lever options
• Global switch conforming to EN,
UL & CSA
3A @ 250VAC
0.1A @ 250VAC
SPDT, SPST-NO, SPST-NC
25g, 51g, 153g
10,000,000 operations min.
200,000 operations min.
9.5
Pin plunger, hinge lever,
simulated roller lever, hinge roller
lever
Solder, quick-connect (#110),
PCB
UL, CSA, EN
10 H x 7 D x 31.6 W
(0.39 x 0.28 x 1.24)
• External actuators
• Easy wiring through connector
terminals
0.1A @ 30VDC
SPST-NC, SPST-NO
153g
500,000 operations min.
200,000 operations min.
9.5
Pin plunger, hinge lever, hinge
roller lever, simulated roller lever
Dipole XA Connector
UL, CSA
6.5 H x 5.8 D x 12.8 W
(0.26 x 0.23 x 0.50)
• Subminiature Snap Action
Switch
• Switches microvoltage/ micro-
current loads
• Long lifespan assured by
high-precision dual spring
reverse-action mechanism
0.1A @ 30VDC (D2F-01)
3A @ 125VAC (D2F)
1A @ 125VAC (D2F-F)
SPDT
75g (D2F-01)
150g (D2F)
75g (D2F-F)
1,000,000 operations min.
30,000 operations min.
(OT: full stroke)
6.5 (0.26)
Pin plunger, hinge lever,
simulated roller lever, roller lever
PCB (straight, self-supporting,
right and left angle), Solder
UL, CSA
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Contact form
Operating force (OF)*
Mechanical service life
Electrical service life
Mounting pitch mm (in)
Actuator types
Terminal choices
Approved standards
* Values are for pin plunger
type only
NEW! NEW!
Switches - Snap Action
25
Switches - Snap Action
ECbodyREADERS.indd 25 ECbodyREADERS.indd 25 7/14/06 11:24:28 PM7/14/06 11:24:28 PM
Switches - Sealed Snap Action
26
Switches - Sealed Snap Action
D2VW D2RW D2SW-P
15.9 H x 10.3 D x 33 W
(0.63 x 0.41 x 1.29)
• Miniature Snap Action Switch
• Sealed water-tight switch
conforms to IP67 & IP68
0.1A @ 125VAC or 5A @125/250VAC
SPDT (SPST-NC, SPST-NO
per request)
200g
10,000,000 operations min.
1,000,000 operations min.
(0.1A, 125VAC)
100,000 operations min.
(3A, 125/250VAC)
10.3 x 22.2 (0.41 x 0.87)
Pin plunger, short hinge lever,
hinge lever, long hinge lever,
simulated roller lever, short hinge
roller lever, hinge roller lever
Solder/Quick connect
(#187 tab terminals) lead wires
UL, CSA (refer to “Ratings”
section of data sheet)
15.9 H x 10.3 D x 35.9 W
(0.63 x 0.41 x 1.41)
• Suitable for microloads to
1 million operations minimum
• Internal Reed Switch sealed to
IP67 ensures stable operation
• Extended humidity operating
range, up to 95% RH
• Available with internally fitted
levers
0.25A @ 100VDC
SPST-NO
153g
1,000,000 operations min.
1,000,000 operations min.
22.2mm
Pin plunger, hinge lever, hinge
roller lever, simulated roller lever
Molded lead wires
–
10.1 H x 6.4 D x 19.8 W
(0.40 x 0.25 x 0.78)
• Subminiature snap action
switch
• Small sealed switch conforms
to IP67 & IP68
0.1A @ 125VAC or 3A @ 125VAC
SPDT (SPST-NC, SPST-NO
per request)
180g
5,000,000 operations min.
200,000 operations min.
(0.1 or 3A, 125VAC)
100,000 operations min.
(2A, 250VAC)
9.5 (0.37)
Pin plunger, hinge lever,
simulated roller lever, hinge roller
lever
Solder, Quick connect (#110),
PCB, lead wires
UL, CSA
7.7 H x 6.4 D x 19.8 W
(0.30 x 0.25 x 0.78)
• Sealed basic switch (IP67)
• Single leaf movable spring
construction
• Microload versions available
2A @ 250VAC or 0.1A @ 125VAC
SPDT, SPST-NO, SPST-NC
183g
1,000,000 operations min.
50,000 (2 A) or 200,000 (0.1A)
operations min.
9.5mm
Pin plunger, hinge lever, hinge
roller lever, simulated roller lever
Solder, Quick connect (#110),
PCB (even & uneven pitch),
Molded lead wires
UL, CSA
D2SW
**IP68 Ratings are based on specific application environments and conditions, per IEC 529. Test conditions for Grade 8
pertaining to continuous immersion are subject to prior agreement between Omron and the user. Acceptance of the test
requirements and the ratings may or may not occur, solely based on the specific conditions of each application.
Consult Omron for consideration of specific usage conditions.
NEW!
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Contact form
Operating force (OF)*
Mechanical service life
Electrical service life
Mounting pitch mm (in)
Actuator types
Terminal choices
Approved standards
* Values are for pin plunger
type only
ECbodyREADERS.indd 26 ECbodyREADERS.indd 26 7/14/06 11:24:35 PM7/14/06 11:24:35 PM
D2JW D2X
7 H x 5.3 D x 13.3/18.5 W
(0.28 x 0.21 x 0.52/0.73)
• Subminiature Snap Action
Switch
• Small sealed switch with
long stroke for reliable
ON/OFF action
• Conforms to IP67
2A @ 12VDC/ 1A @ 24VDC/
0.5A @ 42VDC
SPDT, SPST-NC, SPST-NO
76g
1,000,000 operations min.
100,000 operations min.
8 (0.32) posts, 13 (0.51 ) screw
Pin plunger, hinge lever, long
hinge lever, simulated roller lever,
leaf lever, simulated leaf lever,
long leaf lever
PCB (straight, angled), Solder,
Lead wire (bottom, right side,
left side)
–
9.4 H x 5.3 D x 12.7 W
(0.37 x 0.21 x 0.50)
• Small size
• Gold crossbar contact and coil-
spring for long life
• IP67 rating for molded lead
wire versions
0.1A @ 30VDC
SPDT
250g
1,000,000 operations min.
500,000 operations min.
4.8
Pin plunger, short hinge lever,
hinge lever, simulated roller lever,
hinge roller lever
Solder, molded lead wire
UL, CSA, VDE
13.5 H x 8.0 D x 23.5 W
(0.53 x 0.31 x 0.93)
• Subminiature Snap Action
Switch
• Small sealed switch with
lead wires
• Conforms to IP67
0.5A @ 30VDC or 50mA @
30VDC
SPDT, SPST-NC, SPST-NO
120g
300,000 operations min.
100,000 operations min.
16 (0.63)
Leaf lever, Long leaf lever
Lead wires
–
28.1 H x 8.4 D x 5.3 W
(1.11 x 0.33 x 0.21)
• High contact force
• Wiping action for greater
contact reliability
0.1A @ 30VDC
SPST-NC
50g
1,000,000 operations min.
50,000 operations min.
12.2
Bi-directional paddle
Crimp connector
–
D2HW D2FW-G
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Contact form
Operating force (OF)*
Mechanical service life
Electrical service life
Mounting pitch mm (in)
Actuator types
Terminal choices
Approved standards
* Values are for pin plunger
type only
NEW!
Switches - Sealed Snap Action
Switches - Sealed Snap Action
27
ECbodyREADERS.indd 27 ECbodyREADERS.indd 27 7/14/06 11:24:44 PM7/14/06 11:24:44 PM
Switches - Snap Action
28
Switches - Snap Action
D3C D3K D3D D2T
6 H x 4.2 D x 8 W
(0.24 x 0.17 x 0.31)
• Low torque built-in slide
mechanism for selecting
shorting or non-shorting timing
0.1A @ 30VDC
SPDT
40g, 130g
50,000 operations min.
50,000 operations min.
5.7
Rotary lever
PCB
–
13.7 H x 5.6 D x 18.9 W
(0.54 x 0.22 x 0.74)
• Very low operating force
• Detects cards & paper sheet
10mA @ 12VDC
SPST-NO
3g
2,000,000 operations min.
2,000,000 operations min.
17.3
Paddle lever
Connector
–
30.7 H x 15 D x 36.4 W
(1.21 x 0.59 x 1.43)
• Miniature door switch
• Low-noise
• Disconnectable crimp
connector
• Gold crossbar contacts
1A @ 125VAC or 0.5A @ 250VAC
SPDT, SPST-NC, SPST-NO
204g
300,000 operations min.
100,000 operations min.
Panel-mount
Pin plunger, lever
Connector
UL, CSA
24.65 H x 11.5 D x 28.8 W
(0.97 x 0.45 x 1.13)
• Compact door switch
• Incorporates two circuits for
power loads & micro loads
5A @ 250VAC
0.1A @ 25VAC
DPST-NO
330g
100,000 operations min.
100,000 operations min.
26.4
Pin plunger, hinge lever
Solder
UL, CSA, VDE, SEMKO
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Contact form
Operating force (OF)*
Mechanical service life
Electrical service life
Mounting pitch mm (in)
Actuator types
Terminal choices
Approved standards
* Values are for pin plunger
type only
NEW! NEW!
ECbodyREADERS.indd 28 ECbodyREADERS.indd 28 7/14/06 11:24:57 PM7/14/06 11:24:57 PM
B3F
Varies by type
• Tactile 6 mm/12 mm Square Switch
• Space saving switch with extended
mechanical/electrical service life
• Taped radial packaging available*
50mA @ 24 VDC
SPST-NO
Momentary
Models available with or without ground
terminal
Refer to “ACCESSORIES” section of data
sheet for Keycap information
Refer to “OPERATING CHARACTERISTICS”
section of data sheet
B3F-1 /3
1,000,000 operations min.
(High force: 300,000 operations min.)
B3F-4
3,000,000 operations min.
(High force: 300,000 operations min.)
B3F-5 10,000,000 operations min.
B3F-6 1,000,000 operations min.
(High force: 300,000 operations min.)
Plunger
PCB
Not possible
B3FS B32
Varies by type
• Tape & Reel Surface Mount Switches
• Tactile switch that incorporates a snap
action contact mechanism which ensures
sharp switching operations
50mA @ 24 VDC
SPST-NO
Momentary
None
None
100gf (General purpose)
150gf (High force)
1,000,000 operations min. (General purpose)
300,000 operations min. (High force)
Plunger
Surface mount
Not possible
Various
• Key tops for projected-plunger B3F and
B3W tactile switches
• Available in a wide range of colors and
sizes
N/A
Dimensions mm (in)
Features
Contact form
Action
Ground terminal
Keycap (optional)
Operating force (OF)*
Service life
(Mechanical/ Electrical)
Actuator type
Terminal choices
Cleaning
IMPORTANT NOTE: None of the Tactile switch models listed within this catalog are water-washable.
Contact Rating(s)
Resistive load
Switches - Tactile
29
Switches - Tactile
ECbodyREADERS.indd 29 ECbodyREADERS.indd 29 7/14/06 11:25:16 PM7/14/06 11:25:16 PM
Switches - Tactile
30
Relays - Low Signal
Switches - Tactile
B3M B3W B3S B3SN
7.3 H x 6.0 D x 6.0 W
(0.29 x 0.24 x 0.24)
• High Profile Tactile Switch
• Stroke length of 0.85mm
• Light touch with a minimum
overstroke of 0.25mm
2,000,000 operations min.
50mA @ 12VDC
SPST-NO
Momentary
None
Built in
70 ±20gf
Plunger
PCB
Not possible
Varies by type
• 6 mm/12 mm Square Tactile
Switch
• Sealed Construction allows
immersion cleaning with
Alcohol based solution
B3W-1
Standard force:
1,000,000 operations min.
High-force:
300,000 operations min.
B3W-4
Standard force:
3,000,000 operations min.
High force:
1,000,000 operations min.
50mA @ 24VDC
SPST-NO
Momentary
Models available with or without
ground terminal
Refer to “ACCESSORIES” section
of data sheet for Keycap
information
Refer to “OPERATING”
CHARACTERISTICS" section of
datasheet
Plunger
PCB
Possible
4.3 H x 6.0 D x 6.0 W
(0.17 x 0.24 x 0.24)
• Surface Mount Tactile Switch
• Sealed Construction allows
immersion cleaning with
Alcohol based solution
50mA @ 24VDC
SPST-NO
Momentary
Models available with or without
ground terminal
None
160gf (General purpose)
230gf (High force)
Plunger
Surface mount
Possible
3.1 H x 6.5 D x 7.0 W
(0.12 x 0.26 x 0.28)
• Surface Mount Tactile Switch
• Low profile sealed
construction for dust or humid
environments
• Available in bulk or tape
packaging
50,000 operations min.
1 to 30mA @ 5 to 24VDC
SPST-NO
Momentary
Models available with or without
ground terminal
None
160 ±50g max.
Plunger
Surface mount
Possible
500,000 operations min.
(General purpose)
300,000 operations min.
(High force)
Dimensions mm (in)
Features
Service life
(Mechanical/ Electrical)
Contact Rating(s)
Resistive load
Contact form
Action
Ground terminal
Keycap (Optional)
Operating force (OF)*
Actuator type
Terminal choices
Cleaning
ECbodyREADERS.indd 30 ECbodyREADERS.indd 30 7/14/06 11:25:21 PM7/14/06 11:25:21 PM
Switches - Tactile
31
Switches - Tactile
B3WN B3J B3D B3DA
13 H x 8.0 D x 8.0 W
(0.51 x 0.31 x 0.31)
• Radial Tape Sealed Tactile
Switch
• Compact 8 x 8 mm square size
with double sealing construction
• Assures water-tight/ dust-tight
protection
100,000 operations min.
50mA @ 12VDC
SPST-NO
Momentary
None
None
200 ±70gf
Plunger
PCB
Possible
10.3 H x 18.0 D x 12.0 W
(0.41 x 0.71 x 0.47)
• Hinged Tactile Switch
• Available with 1, 2 or no LED’s
3,000,000 operations min.
1 to 50mA @ 5 to 24VDC
SPST-NO
Momentary
None
None
130 ±50gf
Hinge lever
PCB
Not possible
4 mm or 5 mm domes
• Adhesive-backed individual
dome
• Superior dust-tight
performance
• No soldering required
500,000 (4 mm) /
1,000,000 (5 mm)
10mA @ 12VDC
N/A
Momentary
None
None
170g
Dome
Surface mount
Not possible
4 mm or 5 mm domes
• Adhesive-backed individual
array
• Superior dust-tight
performance
• No soldering required
500,000 (4 mm) /
1,000,000 (5 mm)
_
N/A
Momentary
None
None
160g
Dome
Surface mount
Not possible
Dimensions mm (in)
Features
Service life
(Mechanical/ Electrical)
Contact Rating(s)
Resistive load
Contact form
Action
Ground terminal
Keycap (Optional)
Operating force (OF)*
Actuator type
Terminal choices
Cleaning
NEW!
ECbodyREADERS.indd 31 ECbodyREADERS.indd 31 7/14/06 11:25:23 PM7/14/06 11:25:23 PM
Switches - DIP
32
Switches - DIP
A6H A6T/A6S
Varies by type
• Half-pitch Surface
Mount DIP Switch
• Low profile of 1.55mm
• Seal tape models
available
25mA @ 24VDC
–
4, 8
30gf
1,000 operations min.
1,000 operations min.
Top
Surface mount
Yes (seal tape only)
Varies by type
• Straight PCB/ Surface
Mount DIP Switch
• Flat actuated types
with or without seal
tape, & tape seal
versions in embossed
tape packag ing
• Raised actuator types
also available
25mA @ 24VDC
–
A6T: 1, 2, 4, 6, 8, 10
A6S: 2, 3, 4, 5, 6, 7,
8, 9, 10
A6S (embossed tape):
4, 6, 8
30gf
1,000 operations min.
1,000 operations min.
Top, raised
PCB terminal; Surface
mount
Yes (seal tape only)
Varies by type
• Dustproof construction
• Top, raised & side
actuators
• Smooth switching action
30mA @ 30VDC
–
4, 6, 8, 10
500gf
5,000 operations min.
2,000 operations min.
Top, raised, side
PCB terminal
Yes
Varies by type
• Available in a variety
of model types: A6E:
Flat/Raised actuator
A6ER: Side actuator
25mA @ 24VDC
–
2, 3, 4, 5, 6, 7, 8, 9, 10
30gf
1,000 operations min.
1,000 operations min.
Top, raised, side
PCB terminal
No
Varies by type
• Economical rotary DIP
switch
• Top, side &d extended
shaft models
• O-ring sealed
construction to prevent
ingress of dust and dirt
25mA @ 24VDC
10-BCD
16-Hexidecimal
–
200g-cm max.
5,000 detent
operations min.
5,000 detent
operations min.
Rotary
PCB terminal
No
A6D/A6DR A6E/A6ER A6R/A6RV
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Switching positions
Number of poles
Operating force (OF)*
Mechanical service life,
Electrical service life
Actuator types
Terminal choices
Washable
NEW!
ECbodyREADERS.indd 32 ECbodyREADERS.indd 32 7/14/06 11:25:30 PM7/14/06 11:25:30 PM
Switches - DIP
Switches - DIP
33
A6A A6C
Varies by type
• Subminiature Rotary
DIP Switch
• Small housing for
high-density mounting &
sealed construction for
immersion cleaning
1~100mA @ 5~28VDC
10-BCD
16-Hexadecimal
–
120 to 250g-cm
10,000 detent ops. min.
2,000 detent ops. min.
Rotary
PCB terminal
Yes
Varies by type
• Subminiature Rotary
DIP Switch Internal
sealed construction
eliminates the need for
tape sealing, &
automatic, high-density
mounting is possible
100mA @ 30VDC
10-BCD
16-Hexidecimal
–
15 to 100g-cm
10,000 operations min.
2,000 operations min.
Rotary
PCB terminal
Yes
Dimensions mm (in)
Features
Contact Rating(s)
Resistive load
Switching positions
Number of poles
Operating force (OF)*
Mechanical service life
Electrical service life
Actuator types
Terminal choices
Washable
ECbodyREADERS.indd 33 ECbodyREADERS.indd 33 7/14/06 11:25:47 PM7/14/06 11:25:47 PM
Photomicrosensors
34
Photomicrosensors
Photo IC - Slotted Phototransistor - Reflective
Sub-category
Models
Connection type
Features
Slot width mm (in)
Output logic
Max. forward current mA
Supply voltage (VDC)
Operating temperature
Output low voltage (V)
Output high voltage (V)
Response frequency (Hz)
Output permissible
dissipation (mW)
Forward voltage (V)
Hysteresis
Rising time (low to high)
Falling time (high to low)
Current consumption (mA)
Non-Amplified Non-Amplified
Slotted Photo IC with
connector
EE-SX4235A-P2
Connector*
• Unique snap-in
mounting mechanism
eliminates screws & nuts
• Compatible with 1.0,
1.2, & 1.6 mm PCBs
5 (0.2)
Light-ON
–
7VDC
–25° to +75°C
0.35V max.
(Vcc x 0.9) Vmin.
3,000Hz
250mW
–
–
–
–
30mA max.
* Applicable Mating
Connector
AMP 175778-3
AMP 173977-3
Slotted Photo IC
EE-SX398, EE-SX3070,
EE-SX3081, EE-SX3088,
EE-SX498, EE-SX4070, EE-
SX4081, EE-SX4088
PCB mount
• Built-in Schmitt trigger
circuit
• Directly compatible
with TTL and CMOS
3 to 8 (0.12 to 0.315)
Light-ON or Dark-ON
50mA
4.5 to 16VDC
–40° to +75°C
0.4V max.
15V min.
3,000Hz
250mW
1.2V – typ.
15%
3µS – typ.
20µS – typ.
10mA max.
Sub-category
Model numbers
Connection type
Features
Sensing distance mm (in)
Max. forward current (mA)
Supply voltage (VDC)
Light current (mA)
Response frequency (Hz)
Ambient operating
temperature (°C)
Non-Amplified Non-Amplified
Reflective PCB mount
phototransistor
EE-SY169, EE-SY169A,
EE-SY169B, EE-SB5-B,
EE-SF5-B
PCB mount
• Ideal for office automation
and computer peripheral
equipment
• Infrared LED & photo-
transistor assure long life
5 (0.2)
50mA
(40 mA: EE-SY169,
EE-SY169B)
5 to 30V
EE-SY169(A)(B):
160µA to 2,000µA;
EE-SB5/EE-SF5-B:
200µA to 2,000µA
15kHz
0° to +70°C
Reflective solder
terminal phototransistor
EE-SB5, EE-SF5
Solder terminals
• Sensor housing
reduces external light’s
influence
• High resolution
sensing
5 (0.2)
50mA
5 to 30V
200µA to 2,000µA
15kHz
-25° to +85°C
NOTE: The above specifications do not apply to all models listed.
For specific model information and additional product variations,
visit www.components.omron.com or contact your local Omron representative.
ECbodyREADERS.indd 34 ECbodyREADERS.indd 34 7/14/06 11:25:52 PM7/14/06 11:25:52 PM
Photomicrosensors
Photomicrosensors
35
Sub-category
Models
Connection type
Features
Slot width mm (in)
Max. forward current (mA)
Max. collector dissipation (mW)
Operating temperature (°C)
Forward voltage (V)
Light current (mA)
Collector-emitter
saturated voltage (V)
Rising time (low to high)
Falling time (high to low)
Non-Amplified Non-Amplified Non-Amplified Non-Amplified
Slotted phototransistor with
connector
EE-SX1235A-P2
Connector*
• Electrical connections
using AMP connector
• Compact and
high-resolution
5 (0.2)
50mA
100mW
–25° to +95°C
1.2V typ.
0.6mA to 14mA max.
0.4V max.
8µS typ.
8µS typ.
* Applicable Mating Connector
AMP 175778-3
AMP 173977-3
Miniature PCB mount
transmissive
EE-SX198, EE-SX1018,
EE-SX1035, EE-SX1041,
EE-SX1042, EE-SX1046,
EE-SX1055, EE-SX1070,
EE-SX1071, EE-SX1081,
EE-SX1088, EE-SX1096,
EE-SX1103, EE-SX1105,
EE-SX1106
PCB mount
• Infrared LED &
phototransistor for
long life
• Narrow aperture slit for
high resolution sensing
• Compact size
2 to 8 (0.08 to 0.32)
50mA
100mW
–25° to +85°C
1.2 to 1.3V
0.03 to 14mA max.
0.4V max.
4µS typ.
(10µS typ.: EE-SX1103,
EE-SX1105, EE-SX1106)
4 µS typ.
(10µS typ.: EE-SX1103,
EE-SX1105, EE-SX1106)
Slotted surface mount
phototransistor output
EE-SX1107, EE-SX1108,
EE-SX1109, EE-SX1131
(dual channel)
Surface mount
• Ultra-compact
• High-resolution sensing with
phototransistor output
• Ideal for restricted space
applications
1 to 3 (0.04 to 0.12)
25mA
75mW
–30° to +85°C
1.1V typ.
0.05 to 0.50mA
0.1V typ.
10µS typ.
10µS typ.
Slotted actuator adaptable
phototransistor output
EE-SA107-P2
Connector*
• High resolution sensing
• Non-contact, noiseless
sensing
3.6 (0.14)
50mA
100mW
–25° to +85°C
1.2V typ.
0.5 to 14mA
0.4V max.
8µS typ.
8µS typ.
* Applicable Mating
Connector
AMP 175778-3
AMP 173977-3
NOTE: The above specifications do not apply to all models listed.
For specific model information and additional product variations,
visit www.components.omron.com or contact your local Omron representative.
Phototransistors - Slotted
ECbodyREADERS.indd 35 ECbodyREADERS.indd 35 7/14/06 11:25:59 PM7/14/06 11:25:59 PM
Micro Sensors - MEMS
36
Mass Air Flow 1~5L
D6F-W D6F-V
Dimensions mm (in)
Features
Applicable gases
Supply voltage
Output voltage
Operating temp. range
Ordering information
9H x 20Dx 39L
(0.35 x 0.79 x 1.53
• Clogged filter detection
• Compact size
• Integral passive Dust Segregation
System (DSS)
• Fast fit for easy installation
Air*
12 - 24VDC
5VDC
-10° to +60°C
Flow range Part number
0~1 m/sec flow range D6F-WO1A
0~4 m/sec flow range D6F-WO4A
Air Velocity Sensor
15H x 20D x 66W
(0.60 x 0.79 x 2.60)
Detects –
• Breath rate in respiratory equipment
• Natural gas flow rate
• Gas in fuel cells
• Flow in ventilation systems
Air, Natural gas, LP gas, O2, and N2O *
12 to 24VDC
-10° to +60°C
Dimensions mm (in)
Features
Applicable gases
Supply voltage
Operating temp. range
Ordering information
D6F
Case Gas Flow range Part number
PPS Air 0~1L/min D6F-101A-110
PPS Air 0~2L/min D6F-102A-110
AL LNG 0~5L/min D6F-05N2-000
Mass Air Flow 10~50L
30H x 30D x 78L
(1.18 x 1.18 x 3.07)
• Precision unidirectional mass airflow up to 50LPM
• Stable output
• Horizontal mounting with NBR ‘O’ ring
• Low power consumption
Air, Natural gas, LP gas, O2, & N2O*
12 to 24VDC
-10° to +60°C
Dimensions mm (in)
Features
Applicable gases
Supply voltage
Operating temp. range
Ordering information
D6F-10/20/50
Flow range Part number
0-10LPM D6F10A600
0-20LPM D6F20A600
0-50LPM D6F50A600
*Contact Omron regarding other gases.
*Contact Omron regarding other gases.
*Contact Omron regarding other gases.
8H x 13D x 24L
(0.31 x 0.51 x 0.94)
• Value engineered version of D6F-W
• Smaller package
• Lower Supply Voltage
• Built for OEM designs
• Internal passive Dust Segregation
System (DSS)
Air*
3.3VDC
0 to 2VDC
-10° to +60°C
Flow range Part number
0~3 m/sec flow range D6F-V03A1
Micro Sensors - MEMS
ECbodyREADERS.indd 36 ECbodyREADERS.indd 36 7/24/06 9:41:12 AM7/24/06 9:41:12 AM
Micro Sensors - MEMS
Micro Sensors - MEMS
37
Dimensions mm (in)
Features
Applicable gases
Pressure range
Output
Supply voltage
Current consumption
Operating temp. range
Tilt
30 H x 25.8 D x 30 W
(1.18 x 1.02 x 1.18)
• Solid state MEMS pressure
sensor with frequency output
Air, please inquire about other
gases.
0 - 0.78" of H2O
80 – 300kHz (1kHz/9.81 Pa)
4.2 – 5.5VDC
10 mA max.
-20° to +70°C
D8M-R
Shock/ Vibration/Tilt
Pressure / Blood Pressure
5.50 H x 3.75 D x 5.50 W
(0.22 x 0.15 x 0.22)
• Utilizes Hall Effect technology
• For space-constrained applications
• Surface mount
• No EMC bounce
45~75° (output from high to low)
50~20º (output from low to high)
2.7~3.3VDC
0.5VDC max.
Vdd – 0.5VDC min.
20µA max.; 10µA typ (Vcc = 3VDC)
-10° to +60°C
D6B-2
Dimensions mm (in)
Features
Operating angle
Return angle
Operating voltage (Vdd)
Output voltage
Low
High
Current consumption
Operating temp. range
Ordering information
23.1 H x 23.6 D x 36.4 W
(0.91 x 0.93 x 1.43)
• Compact tilt sensor
• Responds to gradual tilting of 1degree/sec
• Self-resetting
• Quick-connect terminals
• PCB version available (D7A)
50~80°
25° or more
0.1mA @ 5VDC to 100mA
at 30VDC resistive load
SPST-NC
-25° to +60°C
5000 operations min.
Dimensions mm (in)
Features
Operating angle
Return angle (reset)
Contact capacity
Contact form
Operating temp. range
Service life
D7E
6.2 x 4.8 x 8.3
(0.27 x 0.21 x 0.37)
• For applications using a minimum of
100,000 pieces per year only
• For pulse rate detection
• Electrostatic capacity style suitable for
microcomputer input
Air
0-280mm Hg (600mm Hg max.)
-
5VDC
–
0° to +50°C
Blood Pressure 2SMCP-10
2 H x 7 D x 7 W
(0.08 X 0.28 x 0.28)
• Utilizes Hall Effect
technology
• Low profile less than 1mm
• Surface mount
• No EMC bounce
40~80º (left & right)
50~10º (left & right)
2.4 ~ 3.6VDC
0.4VDC max.
Vdd – 0.4VDC max.
1mA max., 1µ standby
-10° to +60°C
D6BN-1
D6B D6BN
ECbodyREADERS.indd 37 ECbodyREADERS.indd 37 7/14/06 11:26:19 PM7/14/06 11:26:19 PM
38
Connectors - FPC
XF2G XF2U XF2J XF2L
0.3mm
non-ZIF
Rear rotary lock
SMT
Horizontal
Top
9.1W x 3.8D x 0.9H
(0.4 x 0.15 x 0.04)
for 29 circuits
17, 21, 25, 29, 35, 39, & 51
Tape & reel
• Low 4.15mm on-board profile
• Applicable FPC thickness of
t=0.3mm
• Top-entry
• Upper contacts
• Wide molding wall on bottom
allows greater board design
freedom
100MΩ @ 250VAC
250VAC 1 min.
(leakage current: 1mA max.)
10 times
–30°C to + 85°C
0.5mm
ZIF
Rear rotary lock
SMT
Horizontal
Double sided
12.6W x 3.5D x 0.9H
(0.5 x 0.14 x 0.04)
for 24 circuits
4, 11, 14, 20, 24, 27, 30, 32,
& 40
Tape & reel
• Low on-board profile of 0.9mm
• Ultra-slim with 3.5mm depth
• Wide molding wall on bottom
allows greater board design
freedom
0.5mm
ZIF
Slide Lock
SMT
Horizontal
Top & Bottom
18.9 W x 3.5 D x 1.2 H
(0.74 x 0.14 x 0.05)
for 30 circuits
4, 5, 6, 7, 8, 10, 12, 13, 15, 18,
19, 20, 21, 22, 24, 26, 30
Tape & reel
• Low profile, small size
• 0.3mm FPC thickness
0.5A
0.5mm
ZIF
Slide Lock
SMT
Vertical
Vertical
19.5 W x 3.4 D x 4.15 H
(0.77 x 0.13 x 0.16)
for 30 circuits
6, 8, 10, 12, 14, 16, 18, 20, 22,
24, 26, 28, 30
Tape & reel
• Low profile, top entry
• 0.3mm FPC thickness
0.5A
50VDC
30mΩ max.
100MΩ @ 250VDC
250VAC 1min.
(leakage current: 1mA max.)
20 times
–30°C to + 85°C
0.5A
50VDC
30mΩ max.
100MΩ @ 250VDC
250VAC 1min.
(leakage current: 1mA max.)
20 times
–30°C to + 85°C
50VDC
60mΩ max.
100MΩ @ 250VAC
250VAC 1 min.
(leakage current: 1mA max.)
20 times
-30°C to + 85°C
0.2A
50VDC
80mΩ max.
Connectors - FPC (Flexible Printed Circuit)
Pitch mm
Insertion type
Cable lock type
PCB mounting
Cable insertion
Contact type(s)
Dimensions mm (in)
Available circuits
Packaging
Features
Specifications
Rated current
Rated voltage
Contact resistance
(
@ 20mV, 100mA )
Insulation resistance
(min.)
Withstand voltage
Circuit insertion or
service life
Ambient operating
temperature
ECbodyREADERS.indd 38 ECbodyREADERS.indd 38 7/14/06 11:27:20 PM7/14/06 11:27:20 PM
Connectors - FPC (Flexible Printed Circuit)
Connectors - FPC
39
XF2M XF2R XF2B
0.5mm
ZIF
Rear rotary lock
SMT
Horizontal
Double Sided
19 W x 4.95 D x 0.9 H
(0.75 x 0.18 x 0.04)
for 34 circuits
6, 9, 18, 24, 34, 40
Tape & reel
• Low profile (0.9mm H)
• 0.12mm FPC thickness
0.3A
50VDC
40mΩ max.
100MΩ @ 250VDC
250 AC 1min.
(leakage current: 1mA max.)
20 times
-30°C to +85°C
0.3mm
ZIF
Rear rotary lock
SMT
Horizontal
Double Sided
8.8 W x 5.2 D x 1.2 H
(0.35 x 0.2 x 0.05)
for 23 circuits
17, 21, 23, 25, 27, 31, 33, 35,
39, 41, 45, & 51
Tape & reel
• Low profile (1.2mm H)
• Ultra-fine pitch
• 0.2mm FPC thickness
0.2A
50VDC
50mΩ max.
100MΩ @ 250VDC
250VAC 1min.
(leakage current: 1mA max.)
20 times
-30°C to +85°C
Pitch mm
Insertion type
Cable lock type
PCB mounting
Cable insertion
Contact type(s)
Dimensions mm (in)
Available circuits
Packaging
Features
Specifications
Rated current
Rated voltage
Contact resistance
(@ 20mV, 100mA )
Insulation resistance
(min.)
Withstand voltage
Circuit insertion or
service life
Ambient operating
temperature
0.5mm
ZIF
Rear rotary lock
SMT
Horizontal
Double Sided
18.5 W x 4.9 D x 2.0 H
(0.73 x 0.19 x 0.08)
for 30 circuits
10, 12, 14,18, 20, 22, 24,
26, 30, 32, 33, 34, 35, 36,
38, 40, 42, 45, 50
Tape & reel
• Low profile (2mm H)
• Short body
• 0.3mm FPC thickness
0.2A
50VDC
50mΩ max.
100MΩ @ 250VDC
250VAC 1min.
(leakage current: 1mA max.)
20 times
-30°C to +85°C
ECbodyREADERS.indd 39 ECbodyREADERS.indd 39 7/14/06 11:27:23 PM7/14/06 11:27:23 PM
Connectors FFC (Flat Flexible Cable)
40
Connectors FFC
XG4U XG4M
Strain relief
2.54
Socket
Au plating
Thru-hole
Vertical or horizontal
IDC flat ribbon cable
Please consult product
specifications for more
information
10, 14, 16, 20, 26, 30, 34,
40, 50, 60, 64
Bag
• Can connect &
disconnect with one
hand
• Save board space
• Reduced mounting
height
• High-reliability, low cost
1A
250VAC
20mΩ max.
100MΩ @ 500VDC
500VAC for 1 minute
50 times
-55ºC to +105°C
MIL-type socket
2.54
Socket
Au plating
Thru-hole
Vertical or horizontal
IDC flat ribbon cable
Please consult product
specifications for more
information
10, 14, 16, 20, 26, 30, 34,
40, 50, 60, 64
Bag
•
Can connect &
disconnect with one
hand
•
Save board space
•
Reduced mounting
height
•
High-reliability, low cost
1A
250VAC
20mΩ max.
100MΩ @ 500VDC
500VAC for 1 minute
50 times
-55°C to +105°C
MIL-type socket
2.54
Plug
Au plating
Thru-hole
Vertical or horizontal
IDC flat ribbon cable
Please consult product
specifications for more
information
10, 14, 16, 20, 26, 30, 34,
40, 50, 60, 64
Bag
• Can connect &
disconnect with one hand
• Save board space
• Reduced mounting height
• High-reliability, low cost
• Available in short lock,
long lock and dual port
models
1A
250VAC
20mΩ max.
100MΩ @ 500VDC
500VAC for 1 minute
50 times
-55°C to +105°C
IDC plug
2.54
Plug
Au plating
Thru-hole
Vertical or horizontal
IDC flat ribbon cable
Please consult product
specifications for more
information
10, 14, 16, 20, 26, 30, 34,
40, 50, 60, 64
Bag
• Solderless plug
• Can connect &
disconnect with one hand
• Save board space
• Reduced mounting height
• High-reliability, low cost
1A
250VAC
20mΩ max.
100MΩ @ 500VDC
500VAC for 1 minute
50 times
-55°C to +105°C
Box type plug
2.54
Plug
Au plating
Thru-hole
Vertical or horizontal
IDC flat ribbon cable
Please consult product
specifications for more
information
10, 14, 16, 20, 26, 30, 34,
40, 50, 60, 64
Bag
• Available in straight DIP &
right-angle DIP terminals
• Can connect & disconnect
with one hand
• Save board space
• Reduced mounting height
• High-reliability, low cost
1A
250VAC
20mΩ max.
100MΩ @ 500VDC
500VAC for 1 minute
50 times
-55°C to +105°C
XG4A XG4E XG4C
NEW! NEW! NEW! NEW! NEW!
Description
Pitch mm
Socket / Plug
Plating on contacts
PCB mounting
Cable insertion
Contact type(s)
Dimensions mm (in)
Available circuits
Packaging
Features
Specifications
Rated current
Rated voltage
Contact resistance
Insulation resistance
Withstand voltage
(leakage current:
1mA max.)
Circuit insertion or
service life
Ambient operating
temperature
ECbodyREADERS.indd 40 ECbodyREADERS.indd 40 7/14/06 11:27:39 PM7/14/06 11:27:39 PM
For More Detailed Information…
Visit Us Online: www.components.omron.com
• Browse Omron’s full range of Product information and
selection guides.
• Download PDF’s — datasheets, brochures, and more.
• Find Omron solutions for competitive products.
• Locate a Distributor and search for available inventory.
Call Us:
1-847-882-2288 Monday through Friday,
7:30 a.m. to 6:00 p.m. Central Time (CT)
Email Us:
components@omron.com
OMRON ELECTRONICS COMPONENTS LLC
55 Commerce Drive • Schaumburg, IL 60173
REQUIRED PRECAUTIONS
IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS
FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL
BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR
PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM.
BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE
FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR
ATTENTION MUST BE GIVEN:
(i) Outdoor use; uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in signifi cant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equipment,
and installations subject to separate industry or government regulations.
(iv) Systems, machines, and equipment that could present a risk to life or property.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR
PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS
A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON
PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE.
www.components.omron.com
Electronic Components
Master Selection Guide
Relays
Switches
Photomicrosensors
Micro Sensors
Connectors
Omron Electronic Components: The Quality, Flexibility and Global Support You Need
YOI-E-03
© 2006 Omron Electronic Componenets
Printed in the U.S.A. 06/2006
USAcovers.indd 2-3 USAcovers.indd 2-3 7/14/06 2:42:48 PM7/14/06 2:42:48 PM
