Surface mount type TPBSeries RoHS compliance Standard Update TPB series are the standard products corresponding to the diversification of the needs. B2 size is the miniaturized version of TPB series. Specifications Items Condition Specifications Rated voltage (V) - 2.5 4.0 6.3 10 Surge voltage (V) - 2.9 4.6 7.2 12 Category temperature range () - -55 to 105 () 120Hz/20 M : 20 Rated capacitance range (F) 120Hz/20 33 to 470 Capacitance tolerance 120Hz/20 Please see the attached characteristics list Rated voltage applied, after 5 minutes Please see the attached characteristics list 100kHz/20 Please see the attached characteristics list Dissipation Factor (DF) Leakage current Equivalent series resistance (ESR) Characteristics of impedance ratio at high temp. and low temp. 100kHz/20 -55 Z/Z20 0.6 to 2.0 105 Z/Z20 0.6 to 2.0 C/C Within20% of the initial value 105, 2,000h B2 size :105, 1,000h, Rated voltage applied Endurance DF Rated temp. 85 products: 85, 1,000h, rated voltage applied Damp heat (Steady State) < Within the initial limit C/C Within40%,-20% of the initial value 60, 90 to 95%RH, 500h, No-applied voltage DF < LC Surge 1.5 times of the initial limit < C/C 105, 1,000 cycles, 1kdischarge resistance, surge voltage applied 1.5 times of the initial limit LC DF Rated temp. 85 products:85 3 times of the initial limit Within5% of the initial value Within the initial limit LC < 3 times of the initial limit POSCAP Line-up Guidelines and precautions for use Products list Explanation of part numbers Packing specifications Dimensions Size list RV L F 100 H 220 Technical data Recommended land pattern dimension Recommended soldering condition 330 S 470 W1 S Reliability (unit: mm) TPU TPH Size code L 0.21 W 0.2 H 0.22 S 0.2 W1 0.1 B2 3.5 2.8 1.9 0.8 2.2 D3L 7.3 4.3 2.8 1.3 2.4 TPSF D4 7.3 4.3 3.8 1.3 TPE TPB TPB TPLTPLF TPF TA TV TH TQC 96 Surface mount type TPG TPC 6.3 2.4 1 0.3D3L,D4 2 0.1B2 8.0 10.0 B2 B2 68 150 haracteristics RV : Rated voltage 4.0 47 Marking Fundamental structure 2.5 33 W Image of case size Selection guide Series system diagram B2 B2 B2 D3L D3L D3L D3L,D4 D3L,D4 D4 D4 Surface mount type TPB Series TPB series characteristics list Size code Part number Maximum allowable MSL Rated Category Category LC ESR Rated Rated DF A mmax ripple current voltage temperature capacitance voltage temperature Reflow Reflow mArms max () F V max/5min. 100kHz/20 100kHz1 <temp. <temp. (V) 260 250 10TPB47M 10 105 47 10 105 8.0 47.0 70 1100 3 3 10TPB33M 10 105 33 10 105 8.0 33.0 70 1100 3 3 B2 6TPB68M 6.3 105 68 6.3 105 8.0 42.8 70 1100 3 3 4TPB68M 4.0 105 68 4.0 105 8.0 27.2 70 1100 3 3 2R5TPB100M 2.5 105 100 2.5 105 8.0 25.0 70 1100 3 3 105 220 10 105 10.0 220.0 40 2000 2a 10TPB150ML 10 105 150 10 105 10.0 150.0 40 2000 3 2a 6TPB330ML 6.3 105 330 6.3 105 10.0 207.9 40 2000 3 2a 6TPB330MAL 6.3 85 330 5.0 105 10.0 207.9 40 2000 3 2a 6TPB220ML 6.3 105 220 6.3 105 10.0 138.6 40 2000 3 2a 4TPB330ML 4.0 105 330 4.0 105 10.0 132.0 40 2000 3 2a 10TPB330M 10 105 330 10 105 10.0 330.0 35 3000 2a 10TPB220M 10 105 220 10 105 10.0 220.0 40 3000 3 2a 6TPB470M 6.3 105 470 6.3 105 15.0 296.1 35 3000 3 2a 6TPB330M 6.3 105 330 6.3 105 10.0 207.9 40 3000 3 2a 1 100k to 500kHz,45 POSCAP Line-up Guidelines and precautions for use Selection guide Please refer to page 65 for the compensation coefficient of maximum allowable ripple current. Series system diagram Image of case size Products list Explanation of part numbers Packing specifications Marking Technical data D4 10 Recommended land pattern dimension Recommended soldering condition Fundamental structure haracteristics Reliability TPU TPH TPG Surface mount type D3L 10TPB220ML TPSF TPC TPE TPB TPB TPLTPLF TPF TA TV TH Red lettersNew models TQC 97