||||||||| | | | | | |
HWZT-MD
• Clock oscillation for microcontrollers
• Telephones
• Household electric appliances
• Low resonant impedance
• Small size, Light weight.
• Low cost timing solution
Siz e Varies
LEADED CERAMIC RESONATOR
STANDARD SPECIFICATIONS:
APPLICATIONS:
FEATURES:
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 05.07.13
Visit www.abracon.com for Terms & Conditions of Sale
TEST CONDITION AND TEST CIRCUIT:
OPTIONS & PART IDENTIFICATION:
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
X: Ceramic Resonator
Parts shall be measured under a condition (Temp.:
20±15°C, Humidity: 65±20% R.H.) unless the standard
condition (Temp: 25±2°C, Humidity: 65±5% R.H.) is
regulated to measure
Parameters Minimum Typical Maximum Units Notes
Frequency Range 2.00 ----- 6.00 MHz
12.51 ----- 60.00
Resonant Impedance (Ro)
----- ----- 80
Ω
2.00 MHz ~ 2.99 MHz
----- ----- 30 3.00 MHz ~ 6.00 MHz
-----
-----
30
12.51 MHz ~ 60.00 MHz
Standard Load Capacitance for
test circuit (C1=C2)
24 30 36
pF
2.00 MHz ~ 6.00 MHz
24
30
36
12.51 MHz ~ 20.00 MHz
12 15 18 20.01 MHz ~ 25.99 MHz
4 5 6 26.00 MHz ~ 60.00 MHz
Frequency Tolerance -0.5 ----- +0.5 %
Frequency Stability -0.3 +0.3 % -25ºC to +85ºC
Withstanding Voltage ----- ----- 50 Vdc DC , 1 min
Rating Voltage D.C. Voltage ----- ----- 6 Vdc
A.C. Voltage ----- ----- 15 Vp-p.
Insulation Resistance 100 ----- ----- MΩ 10Vdc, 1min
Operation Temperature -25 ----- +85 ºC
Storage Temperature -55 ----- +85 ºC
Aging Rate (Fosc) -0.3 ----- 0.3 % From initial value
HWZT - MD -
Frequency
Frequency in MHz
Packaging
Blank: Bulk
A: AMMO package*
*AMMO package
lead length 13.5mm
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
OUTLINE DRAWING:
CAUTION
|||||||||| | | | | |
HWZT-MD
Siz e Varies
LEADED CERAMIC RESONATOR
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 05.07.13
Visit www.abracon.com for Terms & Conditions of Sale
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Dimension: mm
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applica-
tions. Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where
component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and
authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information.
Freq. Range: 2.00 ~ 6.00MHz (Low Profile)
Bulk:
AMMO:
Bulk:
AMMO:
H : 12.51 ~ 23.99MHz, 10.0mm max
24.00 ~ 31.99MHz, 7.5mm max
32.00 ~ 60.00MHz, 6.5mm max
**
10.0max
H
5.0max
0.25±0.1
5.0±1.0
5.0±0.30
0.5±0.1
*:EIAJ MONTHLY CODE
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as
this will cause damage to the component.
(2) This component is not hermetically sealed. Do not clean or wash the component.
(3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering.
(4) Do not expose the component to open flame.
(5) This specification applies to the functionality of the component as a single unit.
(6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that
customers confirm the solderability and characteristics for the product prior to use.
(7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-
reliability life dependant applications. ContactAbracon Corporation prior to using this product when in doubt.,
Packaging:
Bulk: 500pcs/plastic bag
AMMO: 2000pcs/box
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod-
uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according
to MSL 1 requirements to maintain solderability.