No. KB101-11315-434 1(12) Date: 2011/ 8/ 4 Messrs: Digi-Key Specification In the case of specification change, KKC Part Number also will change. Customer part number Customer specification Number Quartz Crystal Product Model CX3225GB Frequency per KB101-11315-431 3/12 KKC Part Number per KB101-11315-431 3/12 [RoHS compliant, MSL 1] [STAMP] Sales office Production KYOCERA Corporation KYOCERA KINSEKI Corporation (Electronic Components Sales Division) Head Office 6 Takeda Tobadono-cho, Fushimi-ku, Kyoto 612-8501 Japan TEL 075-604-3500 FAX 075-604-3501 (Crystal Unit Sales Promotion Division) 1-8-1, Izumi-honcho, Komae-Shi, Tokyo 201-8648 Japan TEL 03-5497-3111 FAX 03-5497-3209 Design Crystal Units Division 1 KYOCERA KINSEKI Yamagata Co. Crystal Units Overseas Design Section Approved by Qe Recycled paper is being used for the conservation of nature. KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 2(12) Date: 2011/ 8/ 4 Change History Rev DESCRPTION DATE DRAWN | CHECKED | APPROVED Vip 0 Spec release 2011/ 8/ 4 does Ah iheh (Z- KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 3(12) Date: 2011/ 8/ 4 [PART NUMBER LIST] Nominal ESR Nominal Frequency KKC Part number (2) Frequency (MHz) Code 10 CX3225GB10000D0HPQZ1 300 10000 12 CX3225GB12000D0HPQZ1 250 12000 14.31818 CX3225GB14318D0HPQZ1 100 14318 16 CX3225GB16000D0HPQZ1 80 16000 20 CX3225GB20000D0HPQZ1 60 20000 24 CX3225GB24000D0HPQZ1 60 24000 25 CX3225GB25000D0HPQZ1 60 25000 27 CX3225GB27000D0HPQZ1 50 27000 32 CX3225GB32000D0HPQZ1 50 32000 40 CX3225GB40000D0HPQZ1 50 40000 48 CX3225GB48000D0HPQZ1 50 48000 KYOCERA KINSEK!I CORPORATIONNo. KB101-11315-431 4(12) Date: 2011/ 8/ 4 1. APPLICATION This specification sheet is applied to quartz crystal CX3225GB. 2. PART NUMBER per KB101-11315-431 3/12 3. RATINGS Items SYMB. Rating Unit Remarks Operating Temperature Topr -40~+85 C Storage Temperature range Tstg -40~+85 C 4. CHARACTERISTICS 4-1 ELECTRICAL CHARACTERISTICS lame a Electrical Specification Test Remarks SYMB.| Min | Typ. | Max | Unit Condition Mode of Vibration Fundamental Nominal FO x MHz Frequency Nominal Temperature Tom 25 C Load Capacitance cL 8.0 pF +25+3C Frequency dae 20.0 +200 Network Analyzer Tolerance E5100A 200 nA Frequency PPM Temperature df/F -30.0 +30.0 -40~+85C | +2543C characteristics Frequency = + Aging Rate 5.0 5.0 1 year +25+3C Equivalent Seri Network Analyzer quiva nh veries ESR x Ohms E5100A Resistance 200 nA Drive Level Pd 0.01 100 uw Insulation M Resistance IR 900 ohms 100V(DC) %* per KB101-11315-431 3/12 KYOCERA KINSEK] CORPORATIONNo. KB101-11315-431 5(12) Date: 2011/ 8/ 4 5. APPEARANCES, PHYSICAL DIMENSION OUTLINE DIMENSION (not to scale) CONNECTION \ 82004 4R0.20 (TOP VIEW) \ a | : if + 3B K131 LH \ J | a 2 @ @ _ ro) There is not consistency of a direction Q of indication for NC. S| | I 40.2+0.1 80.10+0.1 _ i 41.00+0.1 S + Ke) MM C 0.30 3S / + UNIT: mm MARKING @ Nominal Frequency Move the number of maximum indication beams of the frequency to five digits, and omit less than kHz. *% per KB101-11315-431 3/12 @ Identification @ Date Code Year-:-LAST 1 DIGIT of YEAR AND WEEK % For details to LOT CALENDAR (Ex) AUG. 4, 2011 131 @ Manufacturing Location F--- KYOCERA KINSEKI Philippines, Inc. The font of marking is reference. KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 6(12) Date: 2011/ 8/ 4 6. RECOMMENDED LAND PATTERN (not to scale) i. UNIT : mm ei 7. Quality Assurance Location KYOCERA KINSEKI Philippines, Inc. : KYOCERA KINSEKI Philippines, Inc. Quality Assurance Division Quality guarantee When the failure by the responsibility of our company occurs clearly after delivery within 1 year, a substitute article etc. is appropriated gratuitously and this is guaranteed. However, when passing 1 year after delivery, there is a case where | am allowed to consider as onerous repair after both consultation. KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 7(12) Date: 2011/ 8/ 4 8.TAPING & REEL #414884 8-1.Dimensions (+ 3% &) 6 1.050.15 40%0.1 < @1.550,05 Unreeling direction 2.00.05 < SIZWLA No Quen OQ) - >-O\-O- OOO O}/H ~ (8 ewe a 1 o Hie \/ \ | 2 oO | os Oy a CD QD a CQ GQ) = oo ( <7] w Ww i WW ( (3.0) cs] | < TH 2.8+0.1 J J 4.00.1 LD ey <> 3 ~ [A 8) = Oo Q i) NX _ Qo 8-2.Leader and trailer tape(JMFFHRUBAMMTTZ) Empty compartment Components Empty compartment Leader 22h F YF EB an ere oD zean JX#R c A \r A. enp | O_O vm O Oren YOO een oe | rapt ey) o | | - ry a a. ne = | | cs | | TY) | me 160mm oF more 100mm oF more bie Wk 400~560mm 8-3.Direction (The direction shall be seen from the top cover tape side) FELDIARM (by FAANFTFHDSHS.) Unreeling direction BeHLAR 8-4.Specification (#2) 1. Material of the carrier tape shall be PS (ESD). {2387TOH SIL, PS EIS, (MBM) 2. Material of the seal tape shall be polyester(ESD). (JLFFOM AIDRULATILETS, (HEHE) 3. The seal tape shall not cover the sprocket holes. And not protrude from the carrier tape. {27JLFTFIdjKY RE ASLYIEY, BBTTOSIFAMLTOBUTE, } 4. Tensile strength of the tape : 10N or more. {F7O5 [SRY SH REIk 10N LLt} 5. The R of the corner without designation is 0.2RMAX. {#8282 2+O R It 0.2RMAX} 6. Disalignment between centers of the cavity and sprocket hole shalt be 0.05mm or less. (ARO PDEERYUNO Abe OFTHE, 0.05mm UFESTS,} 7. Cumulative pitch tolerance of Po shall be +0.2mm at 10 pitches. { Po"O BRIBE vy FHBEIL, 10 Cy FCHO.2mm tev} 8. The number of lack is 0.1% of 1 reel total part number (the number of the table letters) or the part following whose 1 either is big. (But, the thing which lack of the continuance is not in.) (R3SBIL, 1 VN LO RM RARROO 0.1%, MIS. THOUS HAASLAUF. (EL. BRO RIEOBCE,)} 9. The marking on parts is not fixed its direction, its electrical characteristic is equal. (LURAT-TFACOMARTAER ECLA, BAN RECBBILRL, | 10. Peeling force of the seal tape: 0.3 to 0.7N. {2J- 7 T RI BER 0.3~0,7N} < Cover tape(As\F7) YS Career tape (4+ UF-FT) KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 8(12) Date: 2011/ 8/ 4 8-5.Reel specifications 1) )JLELER In the case of 180 Reel(1000 or 3000 pcs) w iF t rl dB (Nonconductor type Reel) A B Cc D Dimension @ 180 +0/-1.5 @ 60 +1/-0 61340.2 621+0.8 Symbol E Ww t Dimension 2.00.5 9+1 2.0+0.5 (Unit : mm) KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 9(12) Date: 2011/ 8/ 4 9.Enviromental requirements After following test, frequency shall not change more than +10*107 And Cl, 20% or 5Q of large value. 9.1 Resistance to Shock Test condition Natural dropped from height 100cm onto hard wood board in 3 times 9.2 Resistance to Vibration Test condition frequency : 10-55 10Hz Amplitude : 1.5mm Cycle time : 15 minutes Direction : X,Y,Z (3direction),2 h each. 9.3 Resistance to Heat Test condition The quartz crystal unit shall be stored at a temperature of +85+2C for 500 h. Then it shal be subjected to standard atmospheric conditions for 1 h ,after whichi measurement shall be made. 9.4 Resistance to Cold Test condition The quartz crystal unit shall be stored ata temperature of 40+2C for 500 h. Then it shal be subjected to standard atmospheric conditions for 1h ,after whichi measurement shall be made. 9.5 Thermal Shock Test condition The quartz crystal unit shall be subjected to 500 succesive change of temperature cycles , each as shown in tabie below, Then it shall be subjected to standard atmospheric conditions for 1h, after which measurements shall be made. Cycle > ~402C (30min.) ~25+2C (5min.) ~+8542C (30min.) ~2542C (5min.) KYOCERA KINSEK] CORPORATIONNo. KB101-11315-431 10(12) Date: 2011/ 8/ 4 9.6 Resistance to Moisture Test condition The quartz crystal unit shall be stored at a temperature of 602C wich relative humidity of 90% to 95% for 240 h. Then it shall be subjected to standard atmospheric conditions for 1h, after which measurements shall be made 9.7 Soldering condition 1) Material of solder Kind --- lead free solder paste Melting point --- 220+5C 2) Temp.profile of reflow soldering system Temp [C] Time[sec] Peak 260+5 10 (max.) Preheating 180 (typ.) 100 (typ.) Total _ 200 (max.) Temp. profile of reflow 400- O 3004 z 200- 100- 60s <__> 3) Hand Soldering Temperature: 350C, Time: 3sec 9.8 Intensity for bending in circuit board Solder this product in center of the circuit board of 40mm x 100mm, and add the deflection of 3mm as the bottom figure. Test board : t=1.6mm PUSH 20 press jig [/\* Woo | doao UNIT : mm KYOCERA KINSEK] CORPORATIONNo. KB101-11315-431 11(12) Date: 2011/ 8/ 4 10.Cautions for use (1) Automatic mounting machine use Please use after affirmation that select the mounting machine model with a shock small if possible in the case of use of an automatic mounting machine, and it does not have breakage. There is a risk of a quartz crystal unit breakage occurring and not functioning normally by too much shock etc.. (2) Conformity of a circuit In case of use of an oscillation circuit, please insert in a quartz crystal unit in series resistance 5 time as many as the standard value of equivalent in-series resistance, and confirm oscillating. Please remove resistance which inserted after the notes above-mentioned examination in the quartz crystal unit in series, and use it. (3) After making the Quartz Crystal mount on a printed circuit board if it is required to devide the printed circuit board into another one, use it with attentive confirmation so that a warp cased by this dividing might not affect any damage. When designing a printed circuit board as well as handling the mounting As much as possible. The quartz crystal shall be passed through the reflow furnace. Then it shall be subjected to standard atmospheric conditions, after which cleaning shall be made. 11.Storage conditions Storage at prolonged high temperature or low temperature and the storage by high humidity cause degradation of frequency accuracy, and degradation of soldering nature. Storage is performed at the temperature of 18-30 degrees C, and the humidity of 20-70 Percent in the state of packing, and a term is 6 months. 12.Others When any questions and opinions are in the written matter of these delivery specifications, | will ask connection of you from the our company issue day within 45 days. In a connection no case, a written matter is consented to it and employed within a term. KYOCERA KINSEKI CORPORATIONNo. KB101-11315-431 42(12) Date: 2011/ 8/ 4 13.LOT CALENDAR WEEK IMONTHL MON! TUE | WED | THU} FRI | SAT | SUN WEEK |MONTHI MON | TUE | WED | THU] FRI | SAT | SUN a ialaixi[kial@|+/eal | @ ial ale) ki|aAle| +] 1053 | 1 aoa faz) 7) aos a 78 at io 1101 33 4, 5 6 7 1128 11] 12) 131 14 15 18 17 1102 4ol 11] 12) 131 14 1129 qa) ia) 20) 21) 22 4 1103 i7] 18, 19 1130 25, 26 27 28) 29 1104 24| 25) 26 1131; 8 | i 2 3 4 5 1105 2 | 31, 4} 2 1192 a) of id ii] 12 iat 14 1106 7 al 9 1133 15] 16 171 18] 19) 20. 21 1107 14] 15] 16 o} | 1194 a2\ 29| 241 25) 26| 27) 28 1108 i] 22, 29 241 25, 26 271 | 1135] 9 | 29| 90, si] | 2 s] 4 i091 3 | zal a] 2 at 4) ot of | 1438 5| a 7] 8| 9| 10, 11 1110 78 9} 10] 11 1137 1213, 14] 15| 16 a Wt 14 15] 16 i7| 18 1138 tat 20} 21| 22)- 23 1112 ail 221 2a} 24| 25 1139 | 10 | 26 27| 28| 29| 30 4} 1113 | 4 | 28) 29] 30 31] 1 1140 3} 45 6 7 al 9 ti4 4 5} 6 7 8 1141 aol ail tal tal 14 1s 416 1115 it} 2} ial 14] 15 1142 171 18] 19] 20, 211 22 29 1116 1a] 19] 20 21] 22 1143 24) 25, 26 27] 28 29)-.30 1417 | 5 | 25) 26 99 waa} | ai io 4 | 6 1118 a al a at 6 1145 7 8 9 tof 11 1a 43 1119 gf io} ii} 12) 13 1146 14, 15| 16) 17 18| 19} 20 1120 16) 17| 18) 19} 20 2i|_ 22 1147 a1] 221 231 24] 25) 26) 27 1121 931 24 25 26 27/ 2a 2ol |i14e| a2 | 28 20 sol 1 2} af 4 i221 6 | 3 a) 1 2 3) 4st | tia9 | ae 78) 9] 10-11 1123 a 7 al of tol a4} ta) | 1150 12 13) 14 151 16 17] 18 1124 13} 14| 15, 16, 17 ial 19 i151 te] 20, 211 20) 23] 24) 25 1125 20 21| 221 231 24) 25} 26) | 1152 26 27] 28| 291 30] 31 1126 | 7 | 27) 28] 29] 30, 1 3 KYOCERA KINSEKI CORPORATION