Design and speci cations are each subject to change without notice. Ask factory for the current technical speci cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Electric Double Layer Capacitors (Gold Capacitor)/ SD
– EEC-6 –
10.0±0.5
0.2±0.05
3.0±0.5
010.5 max.
11.5 max.
Sleeve
A max.
0.8±0.05
(1.7)
+
0.8±0.05
(1.7)
3.0±0.5 11.5 max.
10.5 max.
0.2±0.05
B max.
5.0±0.8
Features
Endurance : 70 °C 1000 h
RoHS directive compliant
Stacked Coin Type
Series: SD
Speci cations
Category Temp. Range –25 °C to +70 °C
Maximum Operating Voltage 5.5 V.DC
Nominal Cap.Range 0.22 F, 0.33 F
Characteristics at Low
Temperature
Capacitance change ±30 % of initial measured value at +20 °C (at –25 °C)
Internal resistance <5 times of initial measured value at +20 °C (at –25 °C)
Endurance
After 1000 hours application of 5.5 V. DC at +70 °C, the capacitor shall meet the following limits.
Capacitance change ±30 % of initial measured value
Internal resistance <4 times of initial specifi ed value
Shelf Life After 1000 hours storage at +70°C without load, the capacitor shall meet the specifi ed
limits for Endurance.
Di men sions in mm(not to scale)
Recommended Applications
Memory back-up for video and audio equipment,
cameras, telephones, printers, data ter mi nals,
rice cookers, intelligent remote controls
( ) Please use V or H, to indicate the terminal style.
Note : Do not use refl ow soldering. (IR, Atmosphere heating methods, etc.)
Please refer to the page of “Application Guidelines”.
Terminal: V Terminal: H
Cap. (F) B
0.22 5.0
0.33 5.5
Cap. (F) A
0.22 6.0
0.33 6.5
(Unit : mm)
Standard Products
Maximum
operating
voltage
Capacitance
Capacitance
tolerance
Internal resistance
(Initial specifi ed value)
Recommended
discharge current
Parts number
Mass
(Reference value)
Min.
packaging
Q'ty
(V.DC) (F) (F) (Ω)at 1 kHz (μA) (g) (pcs)
5.5
0.022 0.0176 to 0.0396 <
150 200 or less EECS0HD223( ) 200
0.047 0.0376 to 0.0846 <
120 200 or less EECS0HD473( ) 200
0.1 0.080 to 0.180 <
75 300 or less EECS0HD104( ) 200
0.22 0.176 to 0.396 <
75 300 or less EECS0HD224( ) 1.0 200
0.33 0.264 to 0.594 <
75 300 or less EECS0HD334( ) 1.1 200
:
Shaded part numbers have been discontinued since September 30, 2014 and we recommend alternate products for new design.
Please consider more than 0.22 F.
02 Oct. 2014