13
Power Dividers and Splitters
Power Dividers and Splitters
Agilent 11636A,B power dividers
These power dividers provide good match and excellent
tracking characteristics from dc to 26.5 GHz. Power dividers are
recommended for applications such as transmission line fault
testing, as well as power combining. They are not recommended
for ratio and leveling applications.
19.6
(0.77)
44.5 (1.75)
17.5
(0.69)
41.7
(1.64)
Input
OutputOutput
39.9 (1.57)
27.9 (1.10)
16.3 (0.64)
3.6 (0.14)
0
13.2
(0.52)
3.2
(0.125) Diameter
2 Places
9.7 (0.38)
47.0
(1.85)
Agilent 87302C
Frequency Maximum Minimum Maximum Maximum
Agilent range Max. insertion isolation amplitude phase
model (GHz) SWR loss (dB) (dB) tracking (dB) 1tracking deg) 1
11636A dc to 18 1.35 6.0 typ.20.5 3±2°typ.
11636B dc to 26.5 1.29 7.5 0.25 3±2°typ.
87302C 0.5 ST 1.45 1.5 19 0.3 6
26.5 ST 1.60 1.9 19 0.5 10
87303C 1.0 to 18 1.45 1.2 19 0.3 6
18 to 26.5 1.60 1.6 21 0.5 10
87304C 2.0 to 18 1.45 1.1 19 0.3 6
18 to 26.5 1.60 1.4 18 0.5 10
Specifications
Power Rating: 10 watts 87302C/3C/4C, 1 watt CW 11636A/B, (2:1 maximum load SWR)
Connectors: 3.5 mm (f), (SMA compatible)
Weight: 170 g (6 oz) net, 340 g (12 oz) shipping
1Amplitude and phase tracking are the ratio of one output to the other in dB or degrees, respectively.
25.8 to 7.2 dB up to 10 GHz; 5.8 to 7.5 dB up to18 GHz.
3at 18 GHz.
Agilent 87302/303/304C
hybrid power dividers
These power dividers are designed for
power splitting applications that require
minimal insertion loss and high isolation
between ports. They are available in
three models that cover multi-octave
bands to 26.5 GHz. Models with narrower
frequency coverage have less insertion
loss. Hybrid dividers have insertion loss
between the main line and output port
which is 1 to 2 dB less than equivalent
resistive power splitters. Designed for
critical signal processing applications,
phase and amplitude tracking between
the two output ports is controlled
and specified.
Agilent 11636B
Agilent 11636A
Dimensions are in mm (inches) nominal,
unless otherwise specified.
Dimensions are in mm (inches) nominal,
unless otherwise specified.
13
131
www.agilent.com/find/accessories
Power Dividers and Splitters
13
Power Dividers and Splitters
132
A
C
18.542
(0.730)
B
3.429
(0.135) 3.5 mm Female 3 Places 3.16
(0.125)ø
12.192 typ.
(0.48)
25.4
(1.00)
12.7
(0.50)
5.604
(0.26)
13.206
(0.52)
Agilent 87302/303/304C
Agilent 11667C
Agilent 11667B
Agilent 11667A
Agilent model A B C
87302C 196.85 28.702 139.7
(7.75) (1.13) (5.50)
87303C 105.41 26.162 2.10
(4.15) (1.03) (53.34)
87304C 57.15 28.702 0.00
(2.25) (1.13) (0.00)
Agilent 11667C power splitter
This two-resistor power splitter is recommended for applications
that require external source leveling, or for ratio measurements.
It covers the entire dc to 50 GHz frequency band by use of
2.4 mm connectors and advanced micro-circuitry for the resistive
components. These two-resistor type splitters provide excellent
output SWR at the auxiliary arm when used for source leveling or
ratio measurement applications. The tracking between output arms
over a frequency range from dc to 50 GHz allows wideband
measurements to be made with a minimum of uncertainty.
Agilent 11667A,B power splitters
These power splitters feature excellent match and
tracking between outputs, operating from dc to
26.5 GHz. Power splitters are recommended for
external source leveling and ratio measurements.
Dimensions are in mm (inches)
nominal, unless otherwise specified.
Dimensions are in mm (inches) nominal, unless otherwise specified.
4.32
(0.17)
12.7
(0.5) 22.2
(0.87)
21.31
(0.86)
12.0
(0.47)
Radius
35.2
(1.39)
2.5
(0.1)
120 degrees
Side view
Top view
10.0
(0.39)
5.0
(0.2)
17.5
(0.69)
Dimensions are in mm (inches)
nominal, unless otherwise specified.
Power Dividers and Splitters 133
Power Dividers and Splitters
N female
2 places
N male
35.1 typ.
( 1.38 )
25.4
( 1.00 )
J 1 J 2
P 1
Agilent 11850C,D
Agilent 0955-0751
Agilent 11850C,D power splitter
These three-way power splitters are designed for source leveling or ratio
measurements. One output port provides the reference for a leveling or
ratio detector, while the other two ports can be used for two independent
transmission measurements or a comparison measurement.
Nominal
Equivalent Maximum Insertion loss Tracking Shipping
Agilent Frequency output SWR input (input to between weight
model range (nominal 50 Ω) power either output) any two ports Connectors lb (kg)
11667A dc to 18.0 GHz 1.10: dc to 4 GHz 0.5 W 7 dB 0.20 dB to 8 GHz N (f) all ports 0.2 (0.5)
Option 001 1.20: dc to 8 GHz 0.25 dB to 18 GHz Opt. 001: N (m) in, N (f) out
Option 002 1.33: dc to 18 GHz Opt. 002: N (f) in, APC-7 out
11667B dc to 26.5 GHz 1.22 0.5 W 7 dB <0.25 dB 3.5 mm (f) all ports 0.14 (0.3)
11667C dc to 50 GHz 1.65 0.5 W 8.5 dB <0.40 dB 2.4 mm (f) all ports 0.14 (0.3)
11850C dc to 3.0 GHz 1.22 0.1 W 9.5 dB + 1 dB/GHz +0.25 dB, ±3 °N (f) 50 Ωall ports 0.2 (0.5)
11850D dc to 2 GHz 1.09 7.8 dB ±0.2 dB, ±2.5 °N (f) 50 Ωin 0.2 (0.5)
N (f) 75 Ωout
Specifications
Agilent 0955-0751 power splitter
This power splitter is recommended for most 50 Ωeconomy
network analyzer applications. A two resistor splitter provides
excellent output SWR at the auxiliary arm over frequency
allowing wideband measurements to be made with minimum
uncertainty. The frequency range is 300 KHz to 3 GHz. Tracking
flatness between output areas is within ± 0.25 dB and ± 3
degrees of phase. Equivalent source match is 25 dB to 2 GHz
and 20 dB to 3 GHz. Insertion loss is 6 dB nominal. Input port
match is 20 dB to 3 GHz. Connectors are type-N (f) output and
type-N (m) input. Power rating is 1 watt.
Agilent 0955-0752 power splitter
This 75 Ωpower splitter has a frequency range from 300 KHz
to 3 GHz. Tracking flatness is within ± 0.25 dB and ± 3 degrees
of phase. Equivalent source match is 25 dB to 2 GHz and 20 dB
to 3 GHz. Insertion loss is 6 dB nominal. Input port match is 20
dB to 3 GHz. Connectors are type-N (m) input, type-N (f)
output. Power rating is 1 watt.
Agilent 0955-0751
Dimensions are in mm (inches)
nominal, unless otherwise specified.
13
