UNISONIC TECHNOLOGIES CO., LTD PN2907A PNP SILICON TRANSISTOR PNP GENERAL PURPOSE AMPLIFIER DESCRIPTION This UTC PN2907A is designed for use as a general purpose amplifier and switch requiring collector currents to 600 mA. ORDERING INFORMATION Ordering Number Lead Free Plating Halogen Free PN2907AL-AB3-R PN2907AG-AB3-R PN2907AL-T92-B PN2907AG-T92-B PN2907AL-T92-K PN2907AG-T92-K www.unisonic.com.tw Copyright (c) 2012 Unisonic Technologies Co., Ltd Package SOT-89 TO-92 TO-92 1 B E E Pin Assignment 2 C B B 3 E C C Packing Tape Reel Tape Box Bulk 1 of 6 QW-R201-041.E PN2907A PNP SILICON TRANSISTOR ABSOLUTE MAXIUM RATINGS (Ta=25C, unless otherwise specified.) PARAMETER Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current-Continuous RATINGS UNIT -60 V -60 V -5 V -600 mA SOT-89 350 mW Power Dissipation PD TO-92 625 mW Junction Temperature TJ +150 C Storage Temperature TSTG -40 ~ +150 C Note: 1. These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. 2. Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCEO VCBO VEBO IC THERMAL DATA PARAMETER SYMBOL SOT-89 TO-92 Thermal resistance, junction to Ambient JA RATINGS 104 200 UNIT /W /W ELECTRICAL CHARACTERISTICS (Ta=25C, unless otherwise specified.) PARAMETER OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current Collector Cutoff Current SYMBOL BVCEO BVCBO BVEBO IB ICEX ICBO TEST CONDITIONS MIN IC=-10mA, IB=0 IC=-10A, IE=0 IE=-10A , IC=0 VCB=-30V, VEB=-0.5V VCE=-30V, VBE=-0.5V VCB=-50V, IE=0 VCB=-50V, IE=0, Ta=150C -60 -60 -5 Ic=-0.1mA, VCE=-10V Ic=-1.0 mA, VCE=-10V Ic=-10 mA, VCE=-10V Ic=-150 mA, VCE=-10V (Note) Ic=-500 mA, VCE=-10V (Note) Ic=-150mA, IB=-15mA Ic=-500mA, IB=-50mA Ic=-150mA, IB=-15mA (Note) Ic=-500mA, IB=-50mA 75 100 100 100 50 TYP MAX UNIT -50 -50 -0.02 -20 V V V nA nA A A ON CHARACTERISTICS DC Current Gain hFE Collector-Emitter Saturation Voltage (Note) VCE(SAT) Base-Emitter Saturation Voltage VBE(SAT) SMALL SIGNAL CHARACTERISTICS Current Gain - Bandwidth Product fT Ic=-50mA, VCE=-20V, f=100MHz Output Capacitance Cob VCB=-10V, IE=0, f=100kHz Input Capacitance Cib VEB=-2V, IC=0, f=100kHz SWITCHING CHARACTERISTICS Turn-on Time tON Vcc=-30V, Ic=-150mA Delay Time tDLY IB1=-15mA Rise Time tR Turn-off Time tOFF Vcc=-6V, Ic=-150mA Storage Time tS IB1=IB2=-15mA Fall Time tF Note: Pulse Test: Pulse Width 300ms, Duty Cycle2.0% UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 300 -0.4 -1.6 -1.3 -2.6 V V V V 8 30 MHz pF pF 45 10 40 100 80 30 ns ns ns ns ns ns 200 2 of 6 QW-R201-041.E PN2907A PNP SILICON TRANSISTOR TEST CIRCUITS -30V 200 1.0k 0 -16V 50 200ns Fig. 1 Saturated Turn-On Switching Time Test Circuit UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 6 QW-R201-041.E PN2907A Base Emitter On Voltage, VBE(ON) (V) TYPICAL CHARACTERISTICS Capacitance (pF) Collector Current, ICBO (nA) Base Emitter Voltage, VBE(SAT) (V) PNP SILICON TRANSISTOR UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 6 QW-R201-041.E PN2907A Time (nS) TYPICAL CHARACTERISTICS(Cont.) Time (nS) PNP SILICON TRANSISTOR Rise Time vs Collector and Turn On Base Currents Turn ON Base Current, IBf (mA) -50 tR =-15V -20 -10 -5 30ns -2 60ns -1 -10 -100 -500 Collector Current, IC (mA) TYPICAL CHARACTERISTICS FOR COMMON EMITTER (f=1kHz) 5 Common Emitter Characteristics hoe hre 2 hfe 1 hie 0.5 0.2 VCE= -10V Ta=25 0.1 -1 -2 -5 -10 -20 -50 Collector Current, IC (mA) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw Relative To Values At VCE=10V, Char Relative To Values At IC=10mA, Char Common Emitter Characteristics 1.3 1.2 hre hie hfe hoe hre and hoe 1.1 1 hie 0.9 IC= -10mA Ta=25 hfe 0.8 -4 -8 -12 -16 -20 Collector Voltage, VCE (V) 5 of 6 QW-R201-041.E PN2907A PNP SILICON TRANSISTOR TYPICAL CHARACTERISTICS FOR COMMON EMITTER(Cont.) UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 6 QW-R201-041.E