198 MOS FET Relays G3VM-353H/H1
■Absolute Maximum Ratings (Ta = 25°C)
Values inside parentheses ( ) are for G3VM-353H1
■Electrical Characteristics (Ta = 25°C)
Values inside parentheses ( ) are for G3VM-353H1
■Recommended Operating Conditions
Use the G3VM under the following conditions so that the Relay will operate properly.
Values inside parentheses ( ) are for G3VM-353H1
Item Symbol Rating Unit Measurement conditions
Input LED forward current IF50 mA
Repetitive peak LED
forward current
IFP 1 A 100 μs pulses, 100 pps
LED forward current
reduction rate
Δ IF/°C−0.5 mA/°CT
a ≥ 25°C
LED reverse voltage VR5V
Connection temperature Tj125 °C
Output Load voltage (AC peak/DC) VOFF 350 V
Continuous
load current
Connection A IO120 (90) mA
Connection B 120 (90)
Connection C 240 (180)
ON current
reduction rate
Connection A Δ ION/°C−1.2 (-0.9) mA/°CT
a ≥ 25°C
Connection B −1.2 (-0.9)
Connection C −2.4 (-1.8)
Connection temperature Tj125 °C
Dielectric strength between input and
output (See note 1.)
VI-O 1,500 Vrms AC for 1 min
Operating temperature Ta−40 to +85 °C With no icing or condensation
Storage temperature Tstg −55 to +125 °C With no icing or condensation
Soldering temperature (10 s) --- 260 °C 10 s
Load
or AC
DC
1
2
3
6
5
4
1
2
3
6
5
4
Load
DC
DC
Load
1
2
3
6
5
4
Connection Diagram
Connection
A
Connection
B
Connection
C
Note: 1. The dielectric strength between the input and
output was checked by applying voltage be-
tween all pins as a group on the LED side and
all pins as a group on the light-receiving side.
Item Symbol Mini-
mum Typical Maxi-
mum Unit Measurement
conditions
Input LED forward voltage VF1.0 1.15 1.3 V IF = 10 mA
Reverse current IR--- --- 10 μAV
R = 5 V
Capacity between terminals CT--- 30 --- pF V = 0, f = 1 MHz
Trigger LED forward current IFT --- 1.0 3.0 mA IOFF = 10 μA
Output Maximum resistance
with output ON
Connection A RON --- 15 (27) 25 (50) ΩIO = 120 mA
Connection B --- 8 (20) 14 (43) ΩIO = 120 mA
Connection C --- 4 (10) --- ΩIO = 240 mA
Current leakage when the relay is open ILEAK --- 0.0105
(0.003)
1.0 μAV
OFF = 350 V, IF = 5 mA
Capacity between terminals
A Connection
COFF --- 65 (30) --- pF V = 0, f = 1(100) MHz,
IF = 5 mA
Capacity between I/O terminals CI-O --- 0.8 --- pF f = 1 MHz, Vs = 0 V
Insulation resistance RI-O 1,000 --- --- MΩVI-O = 500 VDC,
RoH ≤ 60%
Tu r n - O N t i m e tON --- 0.15 (0.25) 1.0 (0.5) ms IF = 5 mA, RL = 200 Ω,
VDD = 20 V (See note 2.)
Turn-OFF time tOFF --- 0.7 (0.5) 3.0 (1) ms
VOUT
IF
tON tOFF
10% 90%
IF1
2
6
4
RLVDD
VOUT
Note: 2. Turn-ON and Turn-OFF
Times
Item Symbol Minimum Typical Maximum Unit
Load voltage (AC peak/DC) VDD --- --- 280 V
Operating LED forward current IF5---25mA
Continuous load current (AC peak/DC) IO--- --- 120 (90) mA
Operating temperature Ta− 20 --- 65 °C