Accessories Protective Spiral Tubes E39-F32A/F32A5 E39-F32B/F32B5 M3 x 0.5; depth: 4 Head connector *1 (4.6 dia.) End cap *1 3 dia. 6 dia. 12 12 Tube *2 L *1. Material: Brass/nickel plating *2. Material: Stainless steel (SUS304) Note 1. The length L is 1,000 for the E39-F32A/-F32B and 500 for the E39-F32A5/-F32B5. 2. The E39-F32B(5) consists of two E39-F32A(5)s. E39-F32C/F32C5 M4 x 0.7; depth: 4 Head connector *1 (5.6 dia.) End cap *1 4 dia. 7 dia. 12 12 Tube *2 L *1. Material: Brass/nickel plating *2. Material: Stainless steel (SUS304) Note: The length L is 1,000 for the E39-F32C and 500 for the E39-F32C5. E39-F32D/F32D5 M6 x 0.75; depth: 4 Head connector *1 (7 dia.) End cap *1 5 dia. 8.5 dia. 12 12 Tube *2 L *1. Material: Brass/nickel plating *2. Material: Stainless steel (SUS304) Note: The length L is 1,000 for the E39-F32D and 500 for the E39-F32D5. Other Accessories Fiber Cutter E39-F4 8 Thin-fiber Attachments E39-F9 45 1.1 dia. Mark indicating position of insertion into Amplifier Unit 24.5 (2.2 dia.) Material: ABS 10 3.6 dia. Standard-fiber insertion hole Thin-fiber insertion hole Fiber Connector E39-F10 11.7 25 Note: Two per set. *Provided with thin-fiber models. Retention Fiber: 2.2 dia. clip *2 Retention clip *2 Splice *1 3.8 dia. Fiber: 2.2 dia. 3 dia. 26 12.8 *1. Material: Polyester *2. Material: Brass Fiber Connector E39-F13 E39-F14 E39-F15 (48.6) 9.2 32.6 29.6 7.6 3.2 2 Note: Dimension A varies with the model number as shown in the following table. 8 33.8 22.4 20.4 Four, 6 dia. Four, A (See note.) Four, 0.8 Sleeve Bender E39-F11 10.8 R12.5 R7.5 27 50 Four, R0.8 42.5 10 10 R5 R10 27.4 Model E39-F13 E39-F14 E39-F15 Dimension A 2.4 1.2 2.4/1.2