Data sheet | Item number: 721-102/031-000 1-conductor female plug; 100% protected against mismating; clamping collar; 2.5 mm; Pin spacing 5 mm; 2-pole www.wago.com/721-102_031-000 Color: 07.05.2019 Page 1/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 L1 = (Polzahl x Rasterma) + 3 mm L2 = (Polzahl x Rasterma) + 8,8 mm L3 = (Polzahl x Rasterma) + 14,8 mm 2-polige Federleisten - nur 1 Rastnase Item description Universal connection for all conductor types Easy cable pre-assembly and on-unit wiring via vertical and horizontal CAGE CLAMP(R) actuation Integrated test ports 100% protected against mismating Coding option available Safety information 1: The MULTI CONNECTION SYSTEM (MCS) is designed without breaking capacity for compliance with DIN EN 61984. When used as intended, MCS Connectors shall not be connected/disconnected when live or under load. The circuit design should ensure header pins, which can be touched, are not live when unmated. Data Electrical data Ratings per IEC/EN 60664-1 07.05.2019 Page 2/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Ratings per IEC/EN 60664-1 Rated voltage (III / 3) 320 V Rated impulse voltage (III / 3) 4 kV Rated voltage (III / 2) 320 V Rated impulse voltage (III / 2) 4 kV Rated voltage (II / 2) 630 V Rated impulse voltage (II / 2) 4 kV Rated current 16 A Approvals per UL 1059 Rated voltage UL (Use Group B) 300 V Rated current UL (Use Group B) 15 A Rated voltage UL (Use Group D) 300 V Rated current UL (Use Group D) 10 A Approvals per UL 1977 Rated voltage per UL 1977 (factory wiring only) 600 V Rated current per UL 1977 (factory wiring only) 15 A Approvals per CSA Rated voltage CSA (Use Group B) 300 V Rated current CSA (Use Group B) 15 A Rated voltage CSA (Use Group D) 300 V Rated current CSA (Use Group D) 10 A Connection data Connection technology CAGE CLAMP(R) Actuation type Operating tool Solid conductor 0.08 ... 2.5 mm / 28 ... 12 AWG Fine-stranded conductor 0.08 ... 2.5 mm / 28 ... 12 AWG Fine-stranded conductor with ferrule with plastic collar 0.25 ... 1.5 mm Fine-stranded conductor with ferrule without plastic collar 0.25 ... 2.5 mm Strip length 8 ... 9 mm / 0.31 ... 0.35 inch No. of poles 2 Total number of connection points 2 Total number of potentials 2 Number of connection types 1 Number of levels 1 Conductor entry direction to mating direction 0 07.05.2019 Page 3/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Geometrical Data Pin spacing 5 mm / 0.197 inch Width 24.8 mm / 0.976 inch Height 14.3 mm / 0.563 inch Depth 26.45 mm / 1.041 inch Mechanical data Mounting type Mounting flange Type of mounting Feed-through mounting Panel mounting Plug connection Contact type (pluggable connector) Female connector/socket Connector connection type for conductors Mismating protection Yes Material Data Color light gray Material group I Insulating material Polyamide 66 (PA 66) Flammability class per UL94 V0 Clamping spring material Chrome nickel spring steel (CrNi) Contact material Copper alloy Contact plating tin-plated Fire load 0.079 MJ Weight 4.534 g Environmental Requirements Limit temperature range -60 ... +85 C Commercial data Product Group 3 (Multi Conn. System) Country of origin DE GTIN 4044918353052 Customs Tariff No. 85366990990 Approvals / Certificates Country specific Approvals Certificate Logo Approval Additional Approval Text name 07.05.2019 Page 4/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Logo Approval Additional Approval Text name CSA DEKRA Certification B.V. C22.2 1466354 CSA DEKRA Certification B.V. C22.2 1466354 Ship Approvals Logo Certificate name Approval Additional Approval Text ABS American Bureau of Shipping - 14HG1241537PDA DNV GL Det Norske Veritas, Germanischer Lloyd - TAE000016Z UL-Approvals Logo Approval Additional Approval Text Certificate name UR UL International Germany GmbH UL 1977 E45171 UR UL International Germany GmbH UL 1977 E45171 Compatible products Marking accessories Item no.: 210-331/500-103 Marking strips; as a DIN A4 sheet; MARKED; 1-12 (300x); Height of marker strip: 2.3 mm/0.091 in; Strip length 182 mm; Horizontal marking; Self-adhesive www.wago.com/210-331 /500-103 Item no.: 210-331/500-104 www.wago.com/210-331 07.05.2019 Page 5/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Item no.: 210-331/500-104 Marking strips; as a DIN A4 sheet; MARKED; 13-24 (300x); Height of marker strip: 2.3 mm/0.091 in; Strip length 182 mm; Horizontal marking; Self-adhesive www.wago.com/210-331 /500-104 Item no.: 210-332/500-202 Marking strips; as a DIN A4 sheet; MARKED; 1-16 (160x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive www.wago.com/210-332 /500-202 Item no.: 210-332/500-204 www.wago.com/210-332 Marking strips; as a DIN A4 sheet; MARKED; 17-32 (160x); Height of marker strip: 3 mm; Strip length /500-204 182 mm; Horizontal marking; Self-adhesive Item no.: 210-332/500-205 Marking strips; as a DIN A4 sheet; MARKED; 1-32 (80x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive www.wago.com/210-332 /500-205 Item no.: 210-332/500-206 www.wago.com/210-332 Marking strips; as a DIN A4 sheet; MARKED; 33-48 (160x); Height of marker strip: 3 mm; Strip length /500-206 182 mm; Horizontal marking; Self-adhesive Strain relief plate Item no.: 232-602 Strain relief housing www.wago.com/232-602 Item no.: 209-130 Operating tool; suitable for 264, 280 and 281 Series; 1-way; of insulating material www.wago.com/209-130 Item no.: 209-132 Operating tool; for connecting comb-style jumper bar; 2-way; of insulating material www.wago.com/209-132 Item no.: 231-131 Push-button; for female and male connectors; loose www.wago.com/231-131 Item no.: 231-291 Operating tool; for male and female connectors with CAGE CLAMP(R); loose www.wago.com/231-291 Item no.: 280-432 Operating tool; of insulating material; 2-way www.wago.com/280-432 Item no.: 280-433 Operating tool; of insulating material; 3-way www.wago.com/280-433 Item no.: 280-434 Operating tool; of insulating material; 4-way www.wago.com/280-434 Item no.: 280-435 Operating tool; of insulating material; 5-way www.wago.com/280-435 Item no.: 280-436 Operating tool; of insulating material; 6-way www.wago.com/280-436 Item no.: 280-437 Operating tool; of insulating material; 7-way www.wago.com/280-437 Item no.: 280-438 Operating tool; of insulating material; 8-way www.wago.com/280-438 tools Item no.: 280-440 Operating tool; of insulating material; 10-way www.wago.com/280-440 07.05.2019 Page 6/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Item no.: 280-440 Operating tool; of insulating material; 10-way www.wago.com/280-440 General accessories Item no.: 231-668 Lockout caps; for covering unused clamping units www.wago.com/231-668 Item no.: 231-669 Lockout caps; for covering unused clamping units www.wago.com/231-669 Item no.: 216-101 Ferrule; Sleeve for 0.5 mm / AWG 22; uninsulated; electro-tin plated www.wago.com/216-101 Item no.: 216-102 Ferrule; Sleeve for 0.75 mm / AWG 20; uninsulated; electro-tin plated www.wago.com/216-102 Item no.: 216-103 Ferrule; Sleeve for 1 mm / AWG 18; uninsulated; electro-tin plated www.wago.com/216-103 Item no.: 216-104 Ferrule; Sleeve for 1.5 mm / AWG 16; uninsulated; electro-tin plated www.wago.com/216-104 Item no.: 216-106 Ferrule; Sleeve for 2.5 mm / AWG 14; uninsulated; electro-tin plated www.wago.com/216-106 Item no.: 216-121 Ferrule; Sleeve for 0.5 mm / AWG 22; uninsulated; electro-tin plated www.wago.com/216-121 Item no.: 216-122 Ferrule; Sleeve for 0.75 mm / AWG 20; uninsulated; electro-tin plated www.wago.com/216-122 Item no.: 216-123 Ferrule; Sleeve for 1 mm / AWG 18; uninsulated; electro-tin plated www.wago.com/216-123 Item no.: 216-124 Ferrule; Sleeve for 1.5 mm / AWG 16; uninsulated; electro-tin plated www.wago.com/216-124 Item no.: 216-131 Ferrule; Sleeve for 0.25 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-131 Item no.: 216-132 Ferrule; Sleeve for 0.34 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-132 Item no.: 216-141 Ferrule; Sleeve for 0.5 mm / 20 AWG; uninsulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 1/08.92 www.wago.com/216-141 ferrule Item no.: 216-142 Ferrule; Sleeve for 0.75 mm / 18 AWG; uninsulated; electro-tin plated; electrolytic copper; gastight www.wago.com/216-142 crimped; acc. to DIN 46228, Part 1/08.92 Item no.: 216-143 Ferrule; Sleeve for 1 mm / AWG 18; uninsulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 1/08.92 www.wago.com/216-143 Item no.: 216-144 Ferrule; Sleeve for 1.5 mm / AWG 16; uninsulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 1/08.92 www.wago.com/216-144 Item no.: 216-151 www.wago.com/216-151 07.05.2019 Page 7/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Item no.: 216-151 Ferrule; Sleeve for 0.25 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-151 Item no.: 216-152 Ferrule; Sleeve for 0.34 mm / AWG 24; uninsulated; electro-tin plated www.wago.com/216-152 Item no.: 216-201 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated www.wago.com/216-201 Item no.: 216-202 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated www.wago.com/216-202 Item no.: 216-203 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated www.wago.com/216-203 Item no.: 216-204 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated www.wago.com/216-204 Item no.: 216-221 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated www.wago.com/216-221 Item no.: 216-222 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated www.wago.com/216-222 Item no.: 216-223 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated www.wago.com/216-223 Item no.: 216-224 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated www.wago.com/216-224 Item no.: 216-241 Ferrule; Sleeve for 0.5 mm / 20 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-241 Item no.: 216-242 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-242 Item no.: 216-243 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-243 Item no.: 216-244 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-244 Item no.: 216-262 Ferrule; Sleeve for 0.75 mm / 18 AWG; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-262 Item no.: 216-263 Ferrule; Sleeve for 1 mm / AWG 18; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-263 Item no.: 216-264 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-264 Item no.: 216-284 Ferrule; Sleeve for 1.5 mm / AWG 16; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90 www.wago.com/216-284 Item no.: 216-301 Ferrule; Sleeve for 0.25 mm / AWG 24; insulated; electro-tin plated www.wago.com/216-301 07.05.2019 Page 8/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 Item no.: 216-302 Ferrule; Sleeve for 0.34 mm / 22 AWG; insulated; electro-tin plated www.wago.com/216-302 Item no.: 216-321 Ferrule; Sleeve for 0.25 mm / AWG 24; insulated; electro-tin plated www.wago.com/216-321 Item no.: 216-322 Ferrule; Sleeve for 0.34 mm / 22 AWG; insulated; electro-tin plated www.wago.com/216-322 Item no.: 231-902 Comb-style jumper bar; for 5 mm and 5.08 mm pin spacing; reduces conductor size to 1.5 mm www.wago.com/231-902 Item no.: 231-903 Comb-style jumper bar; 3-way; suitable for 231 Series female connectors; with 5 mm pin spacing; insulated www.wago.com/231-903 Item no.: 231-905 Comb-style jumper bar; 5-way; suitable for 231 Series female connectors; with 5 mm pin spacing; insulated www.wago.com/231-905 Item no.: 231-907 Comb-style jumper bar; 7-way; suitable for 231 Series female connectors; with 5 mm pin spacing; insulated www.wago.com/231-907 Jumper Item no.: 231-910 Comb-style jumper bar; 10-way; suitable for 231 Series female connectors; with 5 mm pin spacing; www.wago.com/231-910 insulated Insulation stop Item no.: 231-670 Insulation stop; 0.08-0.2 mm / 0.2 mm "s" www.wago.com/231-670 Item no.: 231-671 Insulation stop; 0.25 - 0.5 mm www.wago.com/231-671 Item no.: 231-672 Insulation stop; 0.75 - 1 mm www.wago.com/231-672 Item no.: 210-136 Test plug; 2 mm O; with 500 mm cable www.wago.com/210-136 Item no.: 210-137 Test plug; 2.3 mm O; with 500 mm cable www.wago.com/210-137 Item no.: 231-661 Test plugs for female connectors; for 5 mm and 5.08 mm pin spacing www.wago.com/231-661 check Downloads Documentation Additional Information pdf 3.6 MB Download CAD/CAE - Smart Data 07.05.2019 Page 9/10 Data sheet | Item number: 721-102/031-000 www.wago.com/721-102_031-000 CAD/CAE - Smart Data CAD data 3D Download 721-102/031-000 URL Download Subject to changes. WAGO Kontakttechnik GmbH & Co. KG Hansastr. 27 32423 Minden Phone: +49571 887-0 | Fax: +49571 887-169 Email: info.de@wago.com | Web: www.wago.com Do you have any questions about our products? We are always happy to take your call at +49 (571) 887-44222. 07.05.2019 Page 10/10