R-VPX Ruggedized VITA 46 For High Speed Embedded Computing Applications Table of Content: Table of Content:2 R-VPX Ruggedized vita 46 3 R-VPX Overview:4 R-VPX Overview:5 R-VPX Part Number List:6 Daughter Card: How to Order 7 Daughter Card: 8 Position Half Left End Module 8 Daughter Card: 16 Position Center Differential Module 9 Daughter Card: 16 Position Center Single End 9 R-VPX EVOLUTION SERIES10 Evolution Series- High Speed evolution Daughter Card: Right-Angle Plug Assembly, 16 Center 11 Backplane: How to Order12 Backplane: 8 Position Left End Backplane 13 Backplane: 16 Position Middle Backplane 14 Backplane: 16 Position Right End Backplane 15 R-VPX Rear transition Module Part Number List: 16 R-VPX Rear transition Module Part Number List: 17 Rear transition Module: Right Angle Plug Assembly, Half Left End, Daughtercard Differential 18 Rear transition Module: Right Angle Plug Assembly, Center RVPX Daughtercard Differential 19 Rear transition Module: Right Angle Plug Assembly, Center RVPX Daughtercard20 Rear transition Module: Right Angle Plug Assembly, Center RVPX Daughtercard Differential 21 Rear transition Module: Right Angle Plug Assembly, Center RVPX Daughtercard Differential-SE 22 Backplane: Rear Transition Module Center 23 Backplane: Rear Transition Module Vertical Receptacle Center, Partial Load 24 Backplane: Rear Transition Module Vertical Receptacle Center, Partial Load 25 Hardware: Zinc Die Cast Guide Modules 26 Hardware: Machined Aluminum Guide Modules 27 Hardware: Zinc Die Cast Guide Pins 28 Hardware: Machined Stainless Steel Guide Pins 29 Tools: Backplane Connector Removal 30 INSTALLATION31 2 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com R-VPX Ruggedized VITA 46 Amphenol's R-VPX is a ruggedized, high-speed, board-to-board interconnect system capable of data rates in excess of 10 Gbps, meeting and exceeding VITA 46 standards. This connector system gives users modularity and flexibility by utilizing PCB wafer construction with customized wafer-loading patterns. R-VPX Ruggedized VITA 46 Connectors are designed for embedded computing applications in: Commercial and Military Aerospace Electronic Systems - C4ISR Missile Defense Ground Systems Space Systems Other Ruggedized Environments Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 3 R-VPX Overview: FEATURES & BENEFITS: * Qualified to VITA 46 for Open VPX applications * Fully intermountable & intermateable to existing VITA 46 connectors * Meets and exceeds VITA 47 * Modular COTS lightweight connector system * Low mating force connector system * Pin-Less backplane connector family * Supports .8 inch card slot pitches * Up to 140 signals per inch * Contact current rating 1.5 Amps * Can be combined with high power modules, RF Modules (VITA 67) and Optical modules (VITA 66) SUPPORTED HIGH-SPEED PROTOCOLS * * * * * * * 1000BASE-KX 10GBASE-KX4 10GBASE-KR10 40GBASE-KR4 InfiniBand SDR, DDR, and QDR PCIe Gen 1, 2, and 3 Serial RapidIO 2.5, 3.125, 5, and 6.25 Gbaud PRODUCT DEVELOPMENT * 16 Gb/S VITA 46 Connectors: available in 2018. * 25+ Gb/S VITA 46 Connectors: available by the end of 2018. 4 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com R-VPX Overview: Signal Integrity Comparison: Insert and Return Loss Signal Integrity Comparison: Impedance Note 44 ps 10-90% TDR Rise time Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 5 R-VPX Part Number List: Part Number Gender Size Insert Type Plating Contact Finish RVPX-P08VM1 Std Module 8 P0 V- VITA 46 50 Micro-Inches Tin RVPX-P08DM1 Std Module 8 P0 Differential 10Gb/s 50 Micro-Inches Tin RVPX-P08SM1 Std Module 8 P0 Single-Ended 50 Micro-Inches Tin RVPX-P08PM1 Std Module 8 P0 Power 50 Micro-Inches Tin RVPX-P16DM1 Std Module 16 P1-P6 Differential 10Gb/s 50 Micro-Inches Tin RVPX-PE16DM1 Evolution Module 16 P1-P6 Differential 25Gb/s 50 Micro-Inches Tin RVPX-P16SM1 Std Module 16 P1-P6 Single-Ended 50 Micro-Inches Tin RVPX-P16PM1 Std Module 16 P1-P6 Power 50 Micro-Inches Tin RVPX-P08VM2 Std Module 8 P0 V- VITA 46 50 Micro-Inches Tin-Lead RVPX-P08DM2 Std Module 8 P0 Differential 10Gb/s 50 Micro-Inches Tin-Lead RVPX-P08SM2 Std Module 8 P0 Single-Ended 50 Micro-Inches Tin-Lead RVPX-P08PM2 Std Module 8 P0 Power 50 Micro-Inches Tin-Lead RVPX-P16DM2 Std Module 16 P1-P6 Differential 10Gb/s 50 Micro-Inches Tin-Lead RVPX-PE16DM2 Evolution Module 16 P1-P6 Differential 25Gb/s 50 Micro-Inches Tin-Lead RVPX-P16SM2 Std Module 16 P1-P6 Single-Ended 50 Micro-Inches Tin-Lead RVPX-P16PM2 Std Module 16 P1-P6 Power 50 Micro-Inches Tin-Lead RVPX-P08VC1 Std Module 8 P0 V- VITA 46 30 Micro-Inches Tin RVPX-P08DC1 Std Module 8 P0 Differential 10Gb/s 30 Micro-Inches Tin RVPX-P08SC1 Std Module 8 P0 Single-Ended 30 Micro-Inches Tin RVPX-P08PC1 Std Module 8 P0 Power 30 Micro-Inches Tin RVPX-P16DC1 Std Module 16 P1-P6 Differential 10Gb/s 30 Micro-Inches Tin RVPX-PE16DC1 Evolution Module 16 P1-P6 Differential 25Gb/s 30 Micro-Inches Tin RVPX-P16SC1 Std Module 16 P1-P6 Single-Ended 30 Micro-Inches Tin RVPX-P16PC1 Std Module 16 P1-P6 Power 30 Micro-Inches Tin RVPX-P08VC2 Std Module 8 P0 V- VITA 46 30 Micro-Inches Tin-Lead RVPX-P08DC2 Std Module 8 P0 Differential 10Gb/s 30 Micro-Inches Tin-Lead RVPX-P08SC2 Std Module 8 P0 Single-Ended 30 Micro-Inches Tin-Lead RVPX-P08PC2 Std Module 8 P0 Power 30 Micro-Inches Tin-Lead RVPX-P16DC2 Std Module 16 P1-P6 Differential 10Gb/s 30 Micro-Inches Tin-Lead RVPX-PE16DC2 Evolution Module 16 P1-P6 Differential 25Gb/s 30 Micro-Inches Tin-Lead RVPX-P16SC2 Std Module 16 P1-P6 Single-Ended 30 Micro-Inches Tin-Lead RVPX-P16PC2 Std Module 16 P1-P6 Power 30 Micro-Inches Tin-Lead RVPX-J08EM1 Backplane 8 J0 End 50 Micro-Inches Tin RVPX-J08EC1 Backplane 8 J0 End 30 Micro-Inches Tin RVPX-J08EM2 Backplane 8 J0 End 50 Micro-Inches Tin-Lead RVPX-J08EC2 Backplane 8 J0 End 30 Micro-Inches Tin-Lead RVPX-J16MM1 Backplane 16 J1, J3-J5 Middle 50 Micro-Inches Tin RVPX-J16MC1 Backplane 16 J1, J3-J5 Middle 30 Micro-Inches Tin RVPX-J16EM1 Backplane 16 J2, J6 End 50 Micro-Inches Tin RVPX-J16EC1 Backplane 16 J2, J6 End 30 Micro-Inches Tin RVPX-J16MM2 Backplane 16 J1, J3-J5 Middle 50 Micro-Inches Tin-Lead RVPX-J16MC2 Backplane 16 J1, J3-J5 Middle 30 Micro-Inches Tin-Lead RVPX-J16EM2 Backplane 16 J2, J6 End 50 Micro-Inches Tin-Lead RVPX-J16EC2 Backplane 16 J2, J6 End 30 Micro-Inches Tin-Lead 6 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com DAUGHTER CARD: How to Order Complete steps 1-6 to create your part number 1. 2. 3. 4. 5. 6. Connector Type Gender Size Insert Type Contact Plating Contact Termination Finish RVPX- P 16 D M 1 STEP 1 : STEP 2 : Connector Type R-VPX- P6 J6 P Module 10 Gb/s PE Evolution Module 16 Gb/s 8 Position Insert 16 16 Position Insert Module Position Contact Plating J3 J2 P1 J1 P0 J0 STEP 4 : P1, P2, P3, P4, P5, P6 D Differential S Single-Ended RVPX-P08VMX* Differential RVPX-P16DCX RVPX-P16DMX* Single-Ended RVPX-P16SCX RVPX-P16SMX* RVPX-HMD-X RVPX-HMM-X Keying Guide Modules M 50 Micro-Inches Gold P Power C 30 Micro-Inches Gold V Standard VITA 46 P0 Load Part No. Amphenol R-VPX Connectors RVPX-P08VCX PO Insert Type STEP 5 : J4 P2 P3 Daughter Card Size 08 J5 P4 Gender Rugged High Speed Board STEP 3 : P5 STEP 6 : Contact Termination Finish pheno l Am HS Ro Tin E U 2 C 1 E /2 002 / 95 / Tin-Lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 7 DAUGHTER CARD: 8 Position Half Left End Module DAUGHTERCARD EDGE PAD CONTACT AREA: TYP 11.810.2 HOUSING 18.400.1 5.50 REF 1.94 TYP 2.69 0.1 2 PLC 3.70 0.1 1.8 REF 7 PLC 10.00.13 5.40 REF 10.500.13 1.35 REF 6 PLC 1.50 REF 10.85 REF 12.60 REF 5.40 REF 7.20 REF 16.08.1 X 12.60 REF CL OF X PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-P08VM1 RVPX-P08VM2 RVPX-P08VC1 RVPX-P08VC2 8 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com DAUGHTER CARD: 16 Position Center Differential Module HOUSING DAUGHTERCARD EDGE 11.81 0.19 7.20 REF PAD CONTACT AREA: TYP 13.50 REF 28.68 .1 X 5.50 REF 18.40 0.1 1.94 TYP 2.69 0.1 4 PLC 3.70 POSITION a1 10.00 .1 10.50 .1 1.80 REF 15 PLC 1.35 REF 6 PLC 1.50 REF 10.85 REF 13.50 REF PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number Gold In Contact Area RVPX-P16DM1 Compliant Contact Termination Finish Tin 50 -Inch min. RVPX-P16DM2 RVPX-P16DC1 Tin-lead Tin 30 -Inch min. RVPX-P16DC2 Nickel Overall 50 -Inch Min. Tin-lead DAUGHTER CARD: 16 Position Center Single End C L OF DAUGHTERCARD WAFER #1 DAUGHTERCARD EDGE 11.81 0.19 PAD CONTACT AREA: TYP HOUSING 7.20 REF 13.50 REF 1.94 TYP 18.40 0.1 28.68 0.1 X 5.50 REF C L OF X 2.69 0.1 4 PLC 1.80 REF 15 PLC C L OF 18.40 10.50 .13 C L OF X 1.35 REF 6 PLC 10.00 .13 1.50 REF POST 3.70 0.1 CONTACT 13.50 REF 10.85 REF PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-P16SM1 RVPX-P16SM2 RVPX-P16SC1 RVPX-P16SC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 9 R-VPX EVOLUTION SERIES HIGH SPEED EVOLUTION Amphenol introduces R-VPX Evolution Module capable of 16+Gbps data rate transfer performance. Evolution is specifically designed to support the latest high speed protocols while still meeting open VPX requirements. Evolution meets the performance requirements of VITA 46 & 47 while still intermateable with existing VITA 46 backplane connectors. This connector systems is optimized for speed for and ruggedized to handle harsh environment requirements in military applications across the board. FEATURES AND BENEFITS Supports High Spoed Protocols * PCIe Gen 4 * 1000BASE-KX * 10GBASE-KX4 * 100GBASE-KR4 * Infiniband SDR, DDR, and QDR * Serial RapidIO 12.5 Gbaud 10 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com EVOLUTION SERIES- HIGH SPEED EVOLUTION DAUGHTER CARD: Right-Angle Plug Assembly, 16 Center PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' AAO PART NUMBER WORK ORDER NUMBER AS LOT NUMBER 11.81.19 CL OF DAUGHTERCARD WAFER #1 DAUGHTERCARD EDGE HOUSING PAD CONTACT AREA: TYP 5.50 REF 18.40 0.1 1.18 TYP 2.690.1 4 PLC 3.70 10.00.1 POSITION a1 10.50.1 1.80 REF 15 PLC 13.50 REF 1.35 REF 6 PLC 1.50 REF 10.85 REF 7.20 REF 13.50 REF 28.68.1 X C L OF X PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-PE16DM1 RVPX-PE16DM2 RVPX-PE16DC1 RVPX-PE16DC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 11 BACKPLANE: How to Order Complete steps 1-6 to create your part number 1. 2. 3. 4. 5. 6. Connector Type Gender Size Insert Type Contact Plating Contact Termination Finish RVPX- J M 1 16 STEP 1 : STEP 2 : Connector Type RVPX- E P6 J5 Insert Type 08 8 Position Insert M Middle 16 16 Position Insert E End J3 J2 P0 J1 J0 Part No. Amphenol R-VPX Connectors J0 RVPX-J08ECX RVPX-J08EMX* J1, J3, J4, J5 RVPX-J16MCX RVPX-J16MMX* J2, J6 RVPX-J16ECX RVPX-J16EMX* STEP 6 : 50 Micro-Inches Gold C 30 Micro-Inches Gold RVPX-HPM-X pheno l Am 1 HS Ro Tin U E M Keying Guide Modules RVPX-HPD-X Contact Termination Finish 2 C Contact Plating 12 J4 P1 Backplane Module Position STEP 5 : P2 P3 Backplane J STEP 4 : Size P4 Gender Rugged High Speed Board STEP 3 : J6 P5 E /2 002 / 95 / Tin-Lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com BACKPLANE: 8 Position Left End Backplane PART MARKING AS FOLLOWS AMPHENOL 77820 `WORK ORDER NUMBER AS LOT NUMBER' CL OF DAUGHTERCARD WAFER #1 SLOT 0.65 REF 1.80.13 HOUSING 4.90.13 2.1 REF 15.34.13 1 8 h O1.430.10 g f 16.20.13 Z 14.4 REF CL OF Z CONTACT 18.60.13 e 4.50 d 1 8 g f e d c b 8 SPACES AT 1.8 = 14.4 1.8 8 PLC a 1.7 REF c TOP OF DAUGHTERCARD (CONNECTOR SIDE) 2.1 REF b a CONNECTOR KEEPOUT AREA PIN "i8" i h I 7.2 REF 72 PLC PIN "a1" 1.8 7 PLC 1.52 REF 2.03 REF 2.400.13 TYP 1.39 16.07.13 4.40.13 12.07.1 V 6.95 REF 7 SPACES AT 1.8 = 12.6 PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 4/1 CL OF V 10.50.13 X 0.65 REF CL OF WAFER IN SLOT #1 12.6 REF PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-J08EM1 RVPX-J08EM2 RVPX-J08EC1 RVPX-J08EC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 13 BACKPLANE: 16 Position Middle Backplane C L OF DAUGHTERCARD WAFER #1 SLOT 0.65 REF CONNECTOR KEEPOUT AREA 1.8 28.68.1 4.90.13 PIN "i16" 2.1 REF HOUSING 7.20 16.20.13 Z 14.40 CONTACT 8 SPACES AT 1.8 = 14.4 18.60.13 1.7 REF Z 2.1 REF 2.40 0.73.1 4.40.13 1.8 29.41.1 PIN "a1" 0.89 REF 28.300.1 V 13.25 REF 1.8 15 PLC 1.8 8 PLC TOP OF DAUGHTERCARD CONNECTOR SIDE 15 SPACES AT 1.8 = 27 V PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 4/1 10.50.13 X 0.65 REF C L OF WAFER SLOT #1 27 REF PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-J16MM1 RVPX-J16MM2 RVPX-J16MC1 RVPX-J16MC2 14 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com BACKPLANE: 16 Position Right End Backplane 4.90.13 HOUSING 0.65 REF 72 PLC 1.8 7.2 REF C L OF DAUGHTERCARD WAFER #1 SLOT CONNECTOR KEEPOUT AREA PIN "i16" 16.2 Z C L OF Z 18.60.13 2.1 REF TOP OF DAUGHTERCARD (CONNECTOR SIDE) 14.4 REF 8 SPACES AT 1.8 = 14.4 CONTACT 4.40.13 0.730.1 31.220.1 1.7 REF 2.40 TYP 4.50 2.1 REF 1.8 8 PLC 28.270.1 1.8 13.25 REF CENTERLINE OF V PIN "a1" 1.8 15 PLC 3.33 REF 0.89 REF 2.39 15 SPACES AT 1.8 = 27.00 PC BOARD LAYOUT (CONNECTOR SIDE) SCALE 4/1 10.50.13 C L OF WAFER SLOT #1 0.65 REF 27 REF PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-J16EM1 RVPX-J16EM2 RVPX-J16EC1 RVPX-J16EC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 15 R-VPX REAR TRANSITION MODULE Part Number List: Part Number Gender Size Insert Type Plating Contact Finish RVPX-RP016VC1 RTM Module 16 End - RP0 30 Micro-Inches Tin RVPX-RP016VC2 RTM Module 16 End - RP0 30 Micro-Inches Tin-Lead RVPX-RP016VM1 RTM Module 16 End - RP0 50 Micro-Inches Tin RVPX-RP016VM2 RTM Module 16 End - RP0 50 Micro-Inches Tin-Lead RVPX-RP116DC1 RTM Module 16 RP1 Differential 30 Micro-Inches Tin RVPX-RP116DC2 RTM Module 16 RP1 Differential 30 Micro-Inches Tin-Lead RVPX-RP116DM1 RTM Module 16 RP1 Differential 50 Micro-Inches Tin RVPX-RP116DM2 RTM Module 16 RP1 Differential 50 Micro-Inches Tin-Lead RVPX-RP116DSC1 RTM Module 16 RP1 Differential & Single-Ended 30 Micro-Inches Tin RVPX-RP116DSC2 RTM Module 16 RP1 Differential & Single-Ended 30 Micro-Inches Tin-Lead RVPX-RP116DSM1 RTM Module 16 RP1 Differential & Single-Ended 50 Micro-Inches Tin RVPX-RP116DSM2 RTM Module 16 RP1 Differential & Single-Ended 50 Micro-Inches Tin-Lead RVPX-RP208DC1 RTM Module 8 RP2 Single-Ended 30 Micro-Inches Tin RVPX-RP208DC2 RTM Module 8 RP2 Single-Ended 30 Micro-Inches Tin-Lead RVPX-RP208DM1 RTM Module 8 RP2 Differential 50 Micro-Inches Tin RVPX-RP208DM2 RTM Module 8 RP2 Differential 50 Micro-Inches Tin-Lead RVPX-RP208SM1 RTM Module 8 RP2 Differential 50 Micro-Inches Tin RVPX-RP208SM2 RTM Module 8 RP2 Differential 50 Micro-Inches Tin-Lead RVPX-RP208SC1 RTM Module 8 RP2 Differential 30 Micro-Inches Tin RVPX-RP208SC2 RTM Module 8 RP2 Differential 30 Micro-Inches Tin-Lead RVPX-RP116DC1 RTM Module 16 RP3-RP6 Differential 30 Micro-Inches Tin RVPX-RP116DC2 RTM Module 16 RP3-RP6 Differential 30 Micro-Inches Tin-Lead RVPX-RP116DM1 RTM Module 16 RP3-RP6 Differential 50 Micro-Inches Tin RVPX-RP116DM2 RTM Module 16 RP3-RP6 Differential 50 Micro-Inches Tin-Lead RVPX-P16SC1 RTM Module 16 RP3-RP6 Single Ended 30 Micro-Inches Tin RVPX-P16SC2 RTM Module 16 RP3-RP6 Single Ended 30 Micro-Inches Tin-Lead RVPX-P16SM1 RTM Module 16 RP3-RP6 Single Ended 50 Micro-Inches Tin RVPX-P16SM2 RTM Module 16 RP3-RP6 Single Ended 50 Micro-Inches Tin-Lead RVPX-RJ0116MC1 RTM Backplane 16 RJ0 15 Columns of contacts 30 Micro-Inches Tin RVPX-RJ0116MC2 RTM Backplane 16 RJ0 15 Columns of contacts 30 Micro-Inches Tin-Lead RVPX-RJ0116MM1 RTM Backplane 16 RJ0 15 Columns of contacts 50 Micro-Inches Tin RVPX-RJ0116MM2 RTM Backplane 16 RJ0 15 Columns of contacts 50 Micro-Inches Tin-Lead RVPX-RJ0216MC1 RTM Backplane 16 RJ0 7 Columns of contacts 30 Micro-Inches Tin RVPX-RJ0216MC2 RTM Backplane 16 RJ0 7 Columns of contacts 30 Micro-Inches Tin-Lead RVPX-RJ0216MM1 RTM Backplane 16 RJ0 7 Columns of contacts 50 Micro-Inches Tin RVPX-RJ0216MM2 RTM Backplane 16 RJ0 7 Columns of contacts 50 Micro-Inches Tin-Lead RVPX-J16MC1 RTM Backplane 16 RJ1 16 Columns of contacts 30 Micro-Inches Tin RVPX-J16MC2 RTM Backplane 16 RJ1 16 Columns of contacts 30 Micro-Inches Tin-Lead RVPX-J16MM1 RTM Backplane 16 RJ1 16 Columns of contacts 50 Micro-Inches Tin RVPX-J16MM2 RTM Backplane 16 RJ1 16 Columns of contacts 50 Micro-Inches Tin-Lead RVPX-RJ1216MC1 RTM Backplane 16 RJ1 8 Columns of contacts 30 Micro-Inches Tin RVPX-RJ1216MC2 RTM Backplane 16 RJ1 8 Columns of contacts 30 Micro-Inches Tin-Lead RVPX-RJ1216MM1 RTM Backplane 16 RJ1 8 Columns of contacts 50 Micro-Inches Tin RVPX-RJ1216MM2 RTM Backplane 16 RJ1 8 Columns of contacts 50 Micro-Inches Tin-Lead RVPX-J08EC1 RTM Backplane 8 RJ2 End 30 Micro-Inches Tin RVPX-J08EC2 RTM Backplane 8 RJ2 End 30 Micro-Inches Tin-Lead 16 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com R-VPX REAR TRANSITION MODULE Part Number List: Part Number Gender Size Insert Type Plating Contact Finish RVPX-J08EM1 RTM Backplane 8 RJ2 End 50 Micro-Inches Tin RVPX-J08EM2 RTM Backplane 8 RJ2 End 50 Micro-Inches Tin-Lead RVPX-J16EC1 RTM Backplane 16 RJ3 End 30 Micro-Inches Tin RVPX-J16EC2 RTM Backplane 16 RJ3 End 30 Micro-Inches Tin-Lead RVPX-J16EM1 RTM Backplane 16 RJ3 End 50 Micro-Inches Tin RVPX-J16EM2 RTM Backplane 16 RJ3 End 50 Micro-Inches Tin-Lead RVPX-J16MC1 RTM Backplane 16 RJ4-RJ6 30 Micro-Inches Tin RVPX-J16MC2 RTM Backplane 16 RJ4-RJ6 30 Micro-Inches Tin-Lead RVPX-J16MM1 RTM Backplane 16 RJ4-RJ6 50 Micro-Inches Tin RVPX-J16MM2 RTM Backplane 16 RJ4-RJ6 50 Micro-Inches Tin-Lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 17 REAR TRANSITION MODULE: Right Angle Plug Assembly, Half Left End, Daughtercard Differential PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' `AAO PART NUMBER' `WORK ORDER NUMBER AS LOT NUMBER' DAUGHTERCARD EDGE 11.81 0.19 HOUSING 18.40 0.10 1.94 TYP 5.50 REF 2.690.10 4 PLC 3.70 10.00 0.1 1.80 REF C L OF X 5.40 REF 10.50 0.1 1.35 REF 6 PLC POST CONTACT 1.50 REF 12.60 REF 10.85 REF C L OF X 5.40 REF 7.20 REF 16.08 0.1 X PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RP208DM1 RVPX-RP208DM2 RVPX-RP208DC2 RVPX-RP208DC2 18 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com REAR TRANSITION MODULE: Right Angle Plug Assembly, Center RVPX Daughtercard Differential CL OF DAUGHTERCARD WAFER #8 DAUGHTERCARD EDGE PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' `AAO PART NUMBER' `WORK ORDER NUMBER AS LOT NUMBER' 11.81 0.19 HOUSING 18.40 0.10 CL OF 18.40 5.50 REF 1.94 TYP 3.70 CL OF X 1.80 REF 7 PLC 10.00 0.1 5.40 REF 10.50 0.1 1.50 REF 12.60 REF 2.690.10 2 PLC 1.35 REF 6 PLC POST 10.85 REF CONTACT 5.40 REF 16.08 0.1 X 7.20 REF C L OF X PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RP208SM1 RVPX-RP208SM2 RVPX-RP208SC1 RVPX-RP208SC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 19 REAR TRANSITION MODULE: Right Angle Plug Assembly, Center RVPX Daughtercard PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' `AAO PART NUMBER' `WORK ORDER NUMBER AS LOT NUMBER' 11.81 0.19 DAUGHTERCARD EDGE C L OF X HOUSING C L OF 18.40 18.40 0.10 1.94 TYP 2.69 4 PLC 5.50 REF 3.70 1.80 15 PLC 13.50 REF 10.00 0.1 C L OF DAUGHTERCARD WAFER #16 1.35 REF 6 PLC 10.50 0.1 POST CONTACT 1.50 REF 10.85 REF 7.20 REF 13.50 REF 28.68 0.1 X CL OF X PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RP016VM1 RVPX-RP016VM2 RVPX-RP016VC1 RVPX-RP016VC2 20 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com REAR TRANSITION MODULE: Right Angle Plug Assembly, Center RVPX Daughtercard Differential DAUGHTERCARD EDGE PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' `AAO PART NUMBER' `WORK ORDER NUMBER AS LOT NUMBER' 11.81 0.19 HOUSING 18.40 0.10 1.94 TYP 5.50 REF 3.70 10.00 0.1 POSITION a16 10.50 0.1 1.80 REF 15 PLC C L OF X 1.35 REF 6 PLC 2.690.10 4 PLC 1.50 REF 10.85 REF 13.50 REF 7.20 REF 13.50 REF 28.68 0.1 x C L OF X PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RP116DM1 RVPX-RP116DM2 RVPX-RP116DC1 RVPX-RP116DC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 21 REAR TRANSITION MODULE: Right Angle Plug Assembly, Center RVPX Daughtercard Differential-SE PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' `AAO PART NUMBER' `WORK ORDER NUMBER AS LOT NUMBER' 11.81 0.19 C L OF DAUGHTERCARD WAFER #16 DAUGHTERCARD EDGE HOUSING 5.50 REF 18.40 0.10 1.94 TYP C L OF X 10.00 0.1 1.80 REF 15 PLC 10.50 0.1 13.50 REF 1.35 REF 6 PLC 2.690.10 4 PLC 3.70 1.50 REF 10.85 REF 7.20 REF 13.50 REF 28.68 0.1 X C L OF X L PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RP116DSM1 RVPX-RP116DSM2 RVPX-RP116DSC1 RVPX-RP116DSC2 22 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com BACKPLANE: Rear Transition Module Center (18.60) (29.41) (10.50) a1 1 a b c d e f g h i PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RJ0116MM1M RVPX-RJ0116MM2M RVPX-RJ0116MC1M RVPX-RJ0116MC2M Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 23 BACKPLANE: Rear Transition Module Vertical Receptacle Center, Partial Load PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' C L OF DAUGHTERCARD WAFER #1 SLOT 29.4 0.1 4.4 0.13 CONTACT HOUSING 1.8 0.13 0.73 0.1 COLUMNS 9 THRU 16 CONTACTS NOT LOADED EXCEPT CONTACTS i9, i10, i11, i12, i13, i14, i15, i16 CONNECTOR KEEPOUT AREA 0.65 REF PIN "a16" 1.7 2.1 REF 8 SPACES AT 1.8 = 14.40 TOP OF DAUGHTERCARD CONNECTOR SIDE 2.1 REF 7.2 REF 1.8 0.13 16.20 Z 14.4 REF PIN "i1" CL OF Z 2.40 0.18 TYP 18.6 0.13 CL OF Z 1.8 8 PLC PC BOARD REAR TRANSITION LAYOUT (CONNECTOR SIDE) SCALE 3/1 28.68 0.1 4.9 0.13 1.8 15 PLC 15 SPACES AT 1.8 = 27 28.30 0.10 V PART MARKING AS FOLLOWS 10.5 0.13 X 1.15 REF 10.8 REF CL OF WAFER #8 SLOT 0.65 REF CL OF WAFER #1 SLOT PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RJ0216MM1 RVPX-RJ0216MM2 RVPX-RJ0216MC1 RVPX-RJ0216MC2 24 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com BACKPLANE: Rear Transition Module Vertical Receptacle Center, Partial Load PART MARKING AS FOLLOWS AMPHENOL 77820 `DATE CODE' CL OF DAUGHTERCARD WAFER #1 SLOT 29.41 0.1 1.8 0.13 COLUMNS 1 THRU 8 CONTACTS NOT LOADED EXCEPT CONTACTS i1, i2, i3, i4, i5, i6, i7, i8 4.4 0.13 HOUSING CONNECTOR KEEPOUT AREA 0.65 REF PIN "a16" 1.7 2.1 REF CONTACT 2.1 REF 16.2 0.13 Z 14.4 REF 7.2 REF 1.8 0.13 18.6 0.13 CL OF Z PIN "i1" 2.40 0.18 TYP 8 SPACES AT 1.8 = 14.40 TOP OF DAUGHTERCARD CONNECTOR SIDE 28.68 0.1 4.9 0.13 1.8 15 PLC 15 SPACES AT 1.8 = 27 1.8 8 PLC PC BOARD REAR TRANSITION LAYOUT (CONNECTOR SIDE) SCALE 3/1 28.30 V 13.25 REF CL OF Z PART MARKING AS FOLLOWS 10.5 0.13 X 0.65 REF 12.6 REF C L OF WAFER #1 SLOT PLATING THICKNESS AND MATERIAL BY PART NUMBER Part Number RVPX-RJ1216MM1 RVPX-RJ1216MM2 RVPX-RJ1216MC1 RVPX-RJ1216MC2 Gold In Contact Area 50 -Inch min. 30 -Inch min. Compliant Contact Termination Finish Nickel Overall Tin Tin-lead Tin 50 -Inch Min. Tin-lead Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 25 HARDWARE: Zinc Die Cast Guide Modules 9.00 S CONTACT. ESD "A" MEASURED COUNTERCLOCKWISE HOUSING 9.63 MAX 0 1.30 0.10 5.50 2.70 2.70 0.08 5.00 O3.00 0.05 Z 12.50 22.75 O4.65 0.05 SECTION S-S S 5.5 LAST PIN ROW OF ADJACENT SIGNAL CONNECTOR 5.25 4.75 Y PIN A1 OF ADJACENT SIGNAL CONNECTOR 1.50 7.25 2 PLC EDGE OF DAUGHTERCARD 12.50 TOP OF MOTHERBOARD M3 X 0.5-6H X3.O MIN 5.50 PRIMARY PCB LAYOUT CONNECTOR SIDE SCALE 3/1 ZINC DIE CAST GUIDE MODULES Part Number 26 DIM. A RVPX-HMD-1 0 RVPX-HMD-2 45 RVPX-HMD-3 90 RVPX-HMD-7 270 RVPX-HMD-8 315 RVPX-HMD-9 No Key Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com HARDWARE: Machined Aluminum Guide Modules O3.00 0.05 Z O4.65 0.05 5.5 LAST PIN ROW OF ADJACENT SIGNAL CONNECTOR 4.75 Y PIN A1 OF ADJACENT SIGNAL CONNECTOR 9 1.50 7.25 2 PLC EDGE OF DAUGHTERCARD 12.50 TOP OF MOTHERBOARD 22.75 X DIM "A" MEASURED COUNTERCLOCKWISE PRIMARY PCB LAYOUT CONNECTOR SIDE SCALE 3/1 HOUSING ESD SPRING 0 5.50 0.04 O5.90 0.08 1.30 0.10 2.70 2.70 0.08 5.00 0.05 SECTION X-X X (5.25) M3 X 0.5-6H X 3.0 (5.5) MACHINED ALUMINUM GUIDE MODULES Part Number DIM. A RVPX-HMM-1 0 RVPX-HMM-2 45 RVPX-HMM-3 90 RVPX-HMM-4 270 RVPX-HMM-5 315 RVPX-HMM-6 8 RVPX-HMM-7 0 RVPX-HMM-8 45 RVPX-HMM-9 90 RVPX-HMM-10 270 RVPX-HMM-12 315 RVPX-HMM-13 8 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 27 HARDWARE: Zinc Die Cast Guide Pins 7.40 45.00 DIM "A" MEASURED CLOCKWISE R3.35 0.05 O5.15 0.05 TOP OF DAUGHTER BOARD M5 X 0.8 -6H DIM "B" O2.55 0.05 5.50 7.20 FIRST PIN IN ROW A OF ADJACENT SIGNAL CONNECTOR 1.50 0.03 7.90 6.60 7.20 PIN A1 OF ADJACENT SIGNAL CONNECTOR RVPX PIN FOOTPRINT SCALE 4/1 O9.00 2.00 24.00 ZINC DIE CAST GUIDE PINS 28 Part Number DIM. B RVPX-HPD-2 2.60 RVPX-HPD-3 4.20 RVPX-HPD-4 5.70 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com HARDWARE: Machined Stainless Steel Guide Pins 45.00 DIM "A" MEASURED CLOCKWISE O3.35 0.05 O5.15 0.05 DIM "A" 7.25 O2.55 0.05 TOP OF DAUGHTER BOARD 0.76 5.50 7.20 7.20 4.65 0.08 FIRST PIN IN ROW A OF ADJACENT SIGNAL CONNECTOR 10-32 UNC-2A 7.90 6.60 PIN A1 OF ADJACENT SIGNAL CONNECTOR RVPX PIN FOOTPRINT SCALE 4/1 1.50 0.03 5.55 0.05 O8.50 0.10 2.00 DIM "B" MACHINED STAINLESS STEEL GUIDE PINS Part Number DIM. A DIM. B RVPX-HPM-1 1.32 24.0 RVPX-HPM-2 2.60 24.0 RVPX-HPM-3 4.20 24.0 RVPX-HPM-4 5.70 24.0 RVPX-HPM-5 7.30 24.0 RVPX-HPM-10 1.32 19.0 RVPX-HPM-12 4.20 19.0 RVPX-HPM-13 5.70 19.0 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 29 TOOLS: Backplane Connector Removal BACKPLANE CONNECTOR REMOVAL Amphenol has a two step process for backplane removal. First the backplane housing is removed using tool 640-0003-000 or 640-0001-000 for 8 and 16 position housings respectively. The tool is placed around the housing with the fingers interlocking the base of the housing you would like to remove. Then the screw is turned until the housing comes off its contacts. Second tool 640-0002-000 is used to remove the contacts. Gently place the comb under the last row of contacts and rock it back until the contacts come out of their holes. Repeat until all rows are removed. 30 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com INSTALLATION INSTALLATION: The RVPX connector is design for simple installation. A Mechanical electric press or Arbor Press is used to compress the compliants into the plated thru holes seating the connector. Care should be taken to ensure even distribution of force across the housings. This can easily be achieved with the use of flat rock tooling. When pressing the module assemblies the connector over hangs the module board slightly. Because of this overhang a support plate is needed to ensure the connector gets fully seated without bowing of the PCB. Extraction tools are available and suggested for backplane connector removal. VISUAL AID The illustration below shows a typical application of RVPX connectors. This illustration should be used by production personnel to ensure a correctly applied product. MODULE ASSEMBLIES MUST BE FULLY SEATED TO DAUGHTERCARD GUIDE MODULE MOUNTING SCREW MUST BE SECURE MOUNTED CONNECTORS: P6 P5 P4 P2 P3 P1 P0 ORIENTATION OF GUIDE PIN KEY MUST MATCH GUIDE MODULE KEY J6 J5 MODULE MUST BE FULLY SEATED TO BACKPLANE J4 J3 J2 J1 MODULE KEYS MUST BE FULLY SEATED IN ADJACENT MODULES J0 GUIDE PIN MUST BE FULLY SEATED AND HARDWARE SECURED ALL MODULES AND GUIDE ASSEMBLIES MUST BE FULLY MATED MATED CONNECTORS: P6 P5 P4 P3 P2 P1 P0 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 31 Notes Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com Notes Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com 33 Notes 34 Cat Brandas * Office: +1 (607) 563-5129 * Mobile: +1 (607) 643-5071 * Email: cbrandas@amphenol-aao.com amphenol-aerospace.com * amphenolmao.com Amphenol Aerospace Operations 40-60 Delaware Avenue Sidney, NY 13838 800-678-0141 Amphenol Canada 605 Milner Avenue Toronto, ON Canada M1B 5X6 416-291-0647 Amphenol Japan, Ltd. 471-1, Deba, Ritto-City Shiga, 520 3041 Japan +81 77 553 8501 Amphenol Commercial Air Division 40-60 Delaware Avenue Sidney, NY 13838 1-800-687-0141 Amphenol Invotec Unit 1-3, Hedging Lane Industrial Estate Dosthill, Tamworth, B77 5HH United Kingdom +44 (0) 1827 263250 Amphenol Nexus Technologies 50 Sunnyside Avenue Stamford, CT 06902 203-327-7300 Amphenol Ionix Systems Prospect House, Taylor Business Park Risley, Warrington, WA3 6HP United Kingdom +44 (0) 1942 685200 Amphenol Martec Limited St. Augustines Business Park Swalecliffe, Whitstable, Kent CT5 2QJ United Kingdom +44 (0) 1227 793 733 Amphenol PCD 72 Cherry Hill Drive Beverly, MA 01915 978-624-3400 Amphenol Limited Thanet Way Whitstable, Kent, CT5 3JF United Kingdom +44 (0) 1227 773200 Amphenol SV Microwave 2400 Centrepark West Drive West Palm Beach, FL 561-840-1800 Amphenol Socapex 948 Promenade De L'Arve - BP 29 74311 Thyez France +33 (0) 4 50 89 28 00 Amphenol Times Microwave, Inc. 358 Hall Avenue Wallingford, CT 06492 800-867-2629 Amphenol Air LB SAS 2 Rue Clement Ader, Zac de We 08110 Carignan France +33 (0) 03 24 22 78 49 Amphenol Fiber Systems International 1300 Central Expressway North, Suite 100 Allen, TX 75013 214-547-2400 Amphenol AirLB GmbH Am Kleinbahnhof 4 D-66740 Saarlouis Germany +49 (0) 68 31/98 10 0 Amphenol Borisch Technologies 4511 East Paris AVE Grand Rapids, MI 49512 616-554-9820 Amphenol SEFEE Z.I. des Cazes - BP243 12402 Saint-Affrique Cedex France +33 (0) 5 65 98 11 00 Amphenol Printed Circuit 91 Northeastern Boulevard Nashua, NH 03062 603-324-4500 Amphenol Interconnect India 105, Bhosari Industrial Area Pune - 411 026 India +91 20 27120363 Amphenol Optimize Carretera Internacional Km 6.5 Col. Parque Industrial Nogales, Sonora, Mexico. C.P. 84094 +52 (631) 311-160 Amphenol Ionix Systems OU Pikk Street 59b Kuressaare 93815 Estonia +372 4521 780 AMAO - European Sales Operations Via Barbaiana 5 20020 Lainate Milano, Italy +39 02 932 541 Amphenol Bar-Tec Ltd. 3 Hagavish st POB 2479 Kfar-Saba 44641 Israel +972-9-7644100 Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. (c) 2018 Amphenol Corp. Printed in U.S.A. 5-2018 AMPHENOL CORPORATION 40-60 Delaware Avenue, Sidney, NY 13838-1395 * 800-678-0141 www.amphenol-aerospace.com * www.amphenolmao.com