2x NeoPixel Ring - 16 x WS2812 5050 RGB LED with Integrated Drivers
1x Costume Goggles
These are fairly easy to put together and should take around an hour to make. You'll need some
basic soldering and hand tools to install the JST connector on the bottom side of the Trinket
and connect your NeoPixel rings. We don't include a soldering iron or solder but sell them in the
Adafruit store and you can find epoxy or hot glue at most hardware/craft stores. The soldering
is easy and is possible to do by beginners, its a 1-2 hour project (30 minutes if you are a kit-
making expert!) Check the tutorial page to see what you'll need to complete the project!
You'll also need a classic USB Mini B cable to program the Trinket, we don't include it as people
tend to have too many USB cables in their desk drawer, but if you need one, you can get it from
us here.
LEARN