sheet
MM
B
Pro/E
B
4
A
1
A
2 3
1 2 3 4
cage code
22526
mat'l code
ltr ecn no. dr date
sheet
index
revision
sheet
COPY
projection
scale
tolerances unless
otherwise specified
linear
angles
dr
engr
chr
appd
size
A
dwg no
title
product family code
www.fciconnect.com
This document is the property of and embodies
CONFIDENTIAL and PROPRIETARY information of FCI.
No part of the information shown on this
document may be used in any way or disclosed
to others without the written consent of FCI.
Copyright FCI.
REV E - 2006-04-18
8
89025
1:1
02/29/00M.STRAWSER
11/19/99M.STRAWSER
213
11/19/99M.STRAWSER
METRAL
11/19/99T.BRUNGARD
METRAL SIGNAL HEADER
1 MOD, 5 ROW PRESS-FIT
CR
CUSTOMER
--
NOTES:
1. FOR DIM A AND B SEE SHEET 2 AND UP.
2. BODY MATERIAL: LIQUID CRYSTAL
POLYMER 30 % GLASS.
FLAME RETARDANT ACC. UL 94-V0.
3. PIN MATERIAL:
PHOSPHOR BRONZE.
4. PLATING ON PRESS-FIT TAIL:
55422 -XYY IS SnPb
55422-XYYLF IS SN (LEAD FREE)
PLATING ON CONTACT AREA CONFORMS TO PERFORMANCE
LEVEL SHOWN IN TABLE.
5. PRODUCT MARKING:
PART NUMBER DESIGNATION & BATCH I.D.
6. ALL PRODUCTS WITH PART NUMBERS SHOWN IN
SUBSEQUENT TABLES WILL BE PACKAGED IN TUBES.
IF TRAY PACKAGING IS REQUIRED, A SUFFIX "P"
WILL BE ADDED TO THE END OF THE PART NUMBER.
EXAMPLE: XXXXX-XXXP OR XXXXX-XXXPLF
7. PRODUCT SPECIFICATION GS-12-180
APPLICATION SPECIFICATION BUS-20-073
8. AFTER INSERTION INTO CIRCUIT BOARD WITH
QUALIFIED TOOL.
9. THE PRODUCTS WHERE THE PART NUMBER ENDS IN LF MEET THE
EUROPEAN UNION DIRECTIVES AND OTHER COUNTRY REGULATIONS
AS DESCRIBED IN GS-22-008.
ALL PRODUCTS EXCEPT THOSE WITH PART NUMBERS CONTAINING
(DRAWING NO.)-N1--- OR (DRAWING NO.)-N5---WILL WITHSTAND EXPOSURE
T0 260 C FOR 60 SECONDS IN A CONVECTION, INFRA-RED OR
VAPOR PHASE REFLOW OVEN. PART NUMBERS (DRAWING N0.)-N1---
AND (DRAWINGS NO.)-N5---WILL NOT WITHSTAND REFLOW AND Au CONTACT
SURFACE OF THE CONTACTS SHALL BE EXPOSED TO A MAXIMIM 140 C FOR
NO LONGER THAN 15 SECONDS IN A WAVE SOLDER APPLICATION.
10. FOR LEAD FREE PART NUMBERS, ADD AN "LF" SUFFIX.
EXAMPLE: 89025-X01LF
0.X 0.3
0.XX 0.13
.XXX .051
0 2
PLATING IN CONTACT AREA
DASH NUMBER PERFORMANCE LEVEL NOTES
-N1YY TELCORDIA CO (NXT) -
-N5YY TELCORDIA UE (NXT) -
-1YY TELCORDIA CO -
-2YY TELECOM CLASS -
-3YY IEC CLASS 1 -
-5YY TELCORDIA UE -
-N1YYLF TELCORDIA CO (NXT)
IEC CLASS 1 SEE NOTE 9
-N5YYLF TELCORDIA UE (NXT) SEE NOTE 9
-1YYLF TELCORDIA CO
IEC CLASS 1 SEE NOTE 9
-2YYLF TELECOM CLASS SEE NOTE 9
-5YYLF TELCORDIA UE SEE NOTE 9
PRODUCT NUMBER
89025-XYY
89025-XYYLF
PDM: Rev:CR Released .STATUS: Printed: Sep 16, 2009