PKSERIAL-SPI1 - MICROCHIP - Datasheet.Directory

PICkit™ Serial SPI

Demo Board

User’s Guide

Information contained in this publication regarding device

applications and the like is provided only for your convenience

and may be superseded by updates. It is your responsibility to

ensure that your application meets with your specifications.

MICROCHIP MAKES NO REPRESENTATIONS OR

WARRANTIES OF ANY KIND WHETHER EXPRESS OR

IMPLIED, WRITTEN OR ORAL, STATUTORY OR

OTHERWISE, RELATED TO THE INFORMATION,

INCLUDING BUT NOT LIMITED TO ITS CONDITION,

QUALITY, PERFORMANCE, MERCHANTABILITY OR

FITNESS FOR PURPOSE. Microchip disclaims all liability

arising from this information and its use. Use of Microchip

devices in life support and/or safety applications is entirely at

the buyer’s risk, and the buyer agrees to defend, indemnify and

hold harmless Microchip from any and all damages, claims,

suits, or expenses resulting from such use. No licenses are

conveyed, implicitly or otherwise, under any Microchip

intellectual property rights.

Trademarks

The Microchip name and logo, the Microchip logo, Accuron,

dsPIC, KEELOQ, KEELOQ logo, microID, MPLAB, PIC,

PICmicro, PICSTART, PRO MATE, PowerSmart, rfPIC, and

SmartShunt are registered trademarks of Microchip

Technology Incorporated in the U.S.A. and other countries.

AmpLab, FilterLab, Linear Active Thermistor, Migratable

Memory, MXDEV, MXLAB, PS logo, SEEVAL, SmartSensor

and The Embedded Control Solutions Company are

registered trademarks of Microchip Technology Incorporated

in the U.S.A.

Analog-for-the-Digital Age, Application Maestro, CodeGuard,

dsPICDEM, dsPICDEM.net, dsPICworks, ECAN,

ECONOMONITOR, FanSense, FlexROM, fuzzyLAB,

In-Circuit Serial Programming, ICSP, ICEPIC, Mindi, MiWi,

MPASM, MPLAB Certified logo, MPLIB, MPLINK, PICkit,

PICDEM, PICDEM.net, PICLAB, PICtail, PowerCal,

PowerInfo, PowerMate, PowerTool, REAL ICE, rfLAB,

rfPICDEM, Select Mode, Smart Serial, SmartTel, Total

Endurance, UNI/O, WiperLock and ZENA are trademarks of

Microchip Technology Incorporated in the U.S.A. and other

countries.

SQTP is a service mark of Microchip Technology Incorporated

in the U.S.A.

All other trademarks mentioned herein are property of their

respective companies.

Printed on recycled paper.

Note the following details of the code protection feature on Microchip devices:

• Microchip products meet the specification contained in their particular Microchip Data Sheet.

• Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the

intended manner and under normal conditions.

• There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our

knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data

Sheets. Most likely, the person doing so is engaged in theft of intellectual property.

• Microchip is willing to work with the customer who is concerned about the integrity of their code.

• Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not

mean that we are guaranteeing the product as “unbreakable.”

Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our

products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts

allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.

Microchip received ISO/TS-16949:2002 certification for its worldwide

headquarters, design and wafer fabrication facilities in Chandler and

Tempe, Arizona, Gresham, Oregon and Mountain View, California. The

Company’s quality system processes and procedures are for its PIC®

MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial

EEPROMs, microperipherals, nonvolatile memory and analog

products. In addition, Microchip’s quality system for the design and

manufacture of development systems is ISO 9001:2000 certified.

PICkit™ SERIAL SPI DEMO
BOARD USER’S GUIDE
© 2007 Microchip Technology Inc. DS51658A-page iii
Table of Contents
Preface ........................................................................................................................... 1
Introduction............................................................................................................ 1
Document Layout .................................................................................................. 1
Conventions Used in this Guide ............................................................................ 2
Recommended Reading........................................................................................ 3
The Microchip Web Site ........................................................................................ 3
Customer Support ................................................................................................. 4
Document Revision History................................................................................... 4
Chapter 1. Product Overview .......................................................................................  5
1.1 Introduction ..................................................................................................... 5
1.2 Highlights ........................................................................................................ 5
1.3 SPI Serial Communications ............................................................................ 6
1.4 What The PICkit™ Serial SPI Demo Board Kit Includes ................................ 6
Chapter 2. Installation and Operation .........................................................................  7
2.1 SPI Demo Board Operation ............................................................................ 7
2.2 Devices ........................................................................................................... 8
Appendix A. Schematic and Layouts ........................................................................... 9
A.1 Introduction  .................................................................................................... 9
A.2 Board - Schematic - Page 1 ......................................................................... 10
A.3 Board - Schematic - Page 2 ......................................................................... 11
A.4 Board - Top Silk Layer  ................................................................................. 12
A.5 Board - Top Layer ........................................................................................ 12
A.6 Board - Bottom Layer ................................................................................... 12
Appendix B. Bill Of Materials (BOM) .......................................................................... 13
Worldwide Sales and Service  .................................................................................... 14

PICkit™ Serial SPI Demo Board User’s Guide

PICkit™ SERIAL SPI DEMO
BOARD USER’S GUIDE
© 2007 Microchip Technology Inc. DS51658A-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the 
PICkit™ Serial SPI Demo Board. Items discussed in this chapter include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the PICkit™ Serial SPI Demo Board as a 
development tool. The manual layout is as follows:
•Chapter 1. “Product Overview” – Important information about the PICkit™ 
Serial SPI Demo Board.
•Chapter 2. “Installation and Operation” – Includes instructions on how to use 
the PICkit™ Serial SPI Demo Board.
•Appendix A. “Schematic and Layouts” – Shows the schematic and layout 
diagrams for the PICkit™ Serial SPI Demo Board.
•Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the 
PICkit™ Serial SPI Demo Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and 
documentation are constantly evolving to meet customer needs, so some actual dialogs 
and/or tool descriptions may differ from those in this document. Please refer to our web site 
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each 
page, in front of the page number. The numbering convention for the DS number is 
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the 
document.
For the most up-to-date information on development tools, see the MPLAB® IDE on-line help. 
Select the Help menu, and then Topics to open a list of available on-line help files.

PICkit™ Serial SPI Demo Board User’s Guide

CONVENTIONS USED IN THIS GUIDE

This manual uses the following documentation conventions:

DOCUMENTATION CONVENTIONS

Description Represents Examples

Arial font:

Italic characters Referenced books MPLAB® IDE User’s Guide

Emphasized text ...is the only compiler...

Initial caps A window the Output window

A dialog the Settings dialog

A menu selection select Enable Programmer

Quotes A field name in a window or

dialog

“Save project before build”

Underlined, italic text with

right angle bracket

A menu path File>Save

Bold characters A dialog button Click OK

A tab Click the Power tab

N‘Rnnnn A number in verilog format,

where N is the total number of

digits, R is the radix and n is a

digit.

4‘b0010, 2‘hF1

Text in angle brackets < > A key on the keyboard Press <Enter>, <F1>

Courier New font:

Plain Courier New Sample source code #define START

Filenames autoexec.bat

File paths c:\mcc18\h

Keywords _asm, _endasm, static

Command-line options -Opa+, -Opa-

Bit values 0, 1

Constants 0xFF, ‘A’

Italic Courier New A variable argument file.o, where file can be

any valid filename

Square brackets [ ] Optional arguments mcc18 [options] file

[options]

Curly brackets and pipe

character: { | }

Choice of mutually exclusive

arguments; an OR selection

errorlevel {0|1}

Ellipses... Replaces repeated text var_name [,

var_name...]

Represents code supplied by

user

void main (void)

{ ...

}

Preface

RECOMMENDED READING

This user's guide describes how to use PICkit™ Serial SPI Demo Board. Other useful

documents are listed below. The following Microchip documents are available and rec-

ommended as supplemental reference resources.

25AA020A/25LC020A Data Sheet, "2K SPI Bus Serial EEPROM" (DS21833)

This data sheet provides detailed information regarding the 25LC020A family.

TC77 Data Sheet, "Thermal Sensor with SPI Interface" (DS20092)

This data sheet provides detailed information regarding the TC77 product.

MCP3201 Data Sheet, "2.7V 12-Bit A/D Converter with SPI Serial Interface"

(DS21290)

This data sheet provides detailed information regarding the MCP3201 product.

MCP4821/MCP4822 Data Sheet, "12-Bit DAC with Internal Vref and SPI Interface"

(DS21953)

This data sheet provides detailed information regarding the MCP4822 product.

MCP41XXX/42XXX Data Sheet, "Single/Dual Digital Potentiometer with SPI Inter-

face" (DS11195)

This data sheet provides detailed information regarding the MCP41010 product.

MCP6S91/2/3 Data Sheet, "Single Ended, Rail-to-Rail I/O, Low Gain PGA"

(DS21908)

This data sheet provides detailed information regarding the MCP6S92 product.

MCP23008/MCP23S08 Data Sheet, "8-Bit I/O Expander with Serial Interface"

(DS21919)

This data sheet provides detailed information regarding the MCP23008/MCP23S08

product.

THE MICROCHIP WEB SITE

Microchip provides online support via our web site at www.microchip.com. This web

site is used as a means to make files and information easily available to customers.

Accessible by using your favorite Internet browser, the web site contains the following

information:

•Product Support – Data sheets and errata, application notes and sample

programs, design resources, user’s guides and hardware support documents,

latest software releases and archived software

•General Technical Support – Frequently Asked Questions (FAQs), technical

support requests, online discussion groups, Microchip consultant program

member listing

•Business of Microchip – Product selector and ordering guides, latest Microchip

press releases, listing of seminars and events, listings of Microchip sales offices,

distributors and factory representatives

PICkit™ Serial SPI Demo Board User’s Guide

CUSTOMER SUPPORT

Users of Microchip products can receive assistance through several channels:

• Distributor or Representative

• Local Sales Office

• Field Application Engineer (FAE)

• Technical Support

Customers should contact their distributor, representative or field application engineer

for support. Local sales offices are also available to help customers. A listing of sales

offices and locations is included in the back of this document.

Technical support is available through the web site at: http://support.microchip.com

DOCUMENT REVISION HISTORY

Revision A (April 2007)

• Initial Release of this Document.

PICkit™ SERIAL SPI DEMO

BOARD USER’S GUIDE

Chapter 1. Product Overview

1.1 INTRODUCTION

The PICkit™ Serial SPI Demo Board demonstrates SPI serial communications and

operation of the following devices:

• 25LC020A - 2K SPI Bus Serial EEPROM

• TC77-5.0 - Thermal Sensor with SPI Interface

• MCP3201 - 2.7V 12-Bit A/D Converter with SPI Serial Interface

• MCP4822 - 12-Bit DAC with Internal VREF and SPI Interface

• MCP41010 - Single/Dual Digital Potentiometer with SPI Interface

• MCP6S92 - Single-Ended, Rail-to-Rail I/O, Low-Gain PGA

• MCP23S08 - 8-Bit I/O Expander with Serial Interface

The PICkit™ Serial SPI Demo Board was designed to easily connect to the PICkit

Serial Analyzer (DV164122). The PICkit Serial Analyzer provides the SPI master mode

serial communications and power. The PICkit™ Serial SPI Demo Board devices all

operate in the SPI slave mode and can easily be connected to virtually any demo or

development board by connecting the communications lines to connector P1.

1.2 HIGHLIGHTS

This chapter discusses:

• SPI Serial Communications

• SPI Demo Board Operation

• SPI Demo Board Devices

FIGURE 1-1: PICkit™ Serial SPI Demo Board.

PICkit™ Serial SPI Demo Board User’s Guide

1.3 SPI SERIAL COMMUNICATIONS

It is assumed that the user is familiar with the SPI protocol. For more information see:

• An SPI tutorial is available on the Microchip Technology website. Click on the

links: Support --> Getting Started --> PIC MCU Tutorials --> SPI - PICmicro®

Serial Peripheral Interface

• Several application notes are available on the Microchip Technology website.

Click on links: Design --> App Notes --> Function: Communications --> SPI

1.4 WHAT THE PICkit™ SERIAL SPI DEMO BOARD KIT INCLUDES

This PICkit™ Serial SPI Demo Board Kit includes:

• PICkit™ Serial SPI Demo Board (102-00135)

• Analog and Interface Products Demonstration Boards CD-ROM (DS21912)

- PICkit™ Serial SPI Demo Board User’s Guide (DS51658)

PICkit™ SERIAL SPI DEMO

BOARD USER’S GUIDE

Chapter 2. Installation and Operation

2.1 SPI DEMO BOARD OPERATION

The PICkit™ Serial SPI Demo Board was designed to easily connect to the PICkit

Serial Analzyer (DV164122). Refer to the PICkit Serial Analyzer User’s Guide

(DS51647) chapter on SPI Master Communications mode for configuration and

operation information of the PICkit Serial Analyzer.

The PICkit Serial Analyzer provides the SPI master mode serial communications and

power. The PICkit™ Serial SPI Demo Board devices all operate in the SPI slave mode.

Figure 2-1 shows the PICkit™ Serial SPI Demo Board block diagram.

The PICkit Serial Analyzer has only one active low chip select (CS) line. Individual

devices are enabled by inserting the 2-pin shunt onto jumper JP1 through JP7 to

connect the CS line to the device. Only one jumper should be inserted at a time.

FIGURE 2-1: PICkit™ Serial SPI Demo Board Block Diagram.

Connector P1 connects to the PICkit Serial Analyzer or virtually any demo or

development board. Connector P1 pin assignments are listed in Table 2-1.

TABLE 2-1: SPI DEMO BOARD CONNECTOR P1 PIN ASSIGNMENTS

Note: Only one jumper should be inserted into JP1 though JP7 at a time.

Incorrect device operation will occur.

JP2

25LC020 TC77-5.0 MCP3201 MCP4822 MCP41010

MOSI

MISO

SCK

MCP6S92 MCP23S08

JP1 JP3 JP4 JP5 JP6 JP7

Pin Label Type Description

1CSInput Chip Select (Active Low)

2+VPowerPower

3 GND Ground Ground

4 MISO Output Master In, Slave Out

5 SCK Input Serial Clock

6 MOSI Input Master Out, Slave In

PICkit™ Serial SPI Demo Board User’s Guide

2.2 DEVICES

2.2.1 25LC020A 2K SPI Bus Serial EEPROM

The 25LC020A is a 2Kbit Serial EEPROM. Refer to the 25AA020A/25LC020A Data

Sheet (DS21833) for complete information.

Data can be read or written to the 25LC020A.

2.2.2 TC77-5.0 Thermal Sensor with SPI Interface

The TC77 is a serially accessible digital temperature sensor. Refer to the TC77 Data

Sheet (DS20092) for complete information.

The temperature can be read from the TC77.

2.2.3 MCP3201 2.7V 12-Bit A/D Converter with SPI Serial Interface

The MCP3201 is a successive approximation 12-bit Analog-to-Digital Converter with

on-board sample and hold circuitry. Refer to the MCP3201 Data Sheet (DS21290) for

complete information.

The device provides a single pseudo-differential input. Potentiometer R6 is configured

as a voltage divider (see schematic in Appendix A. “Schematic and Layouts”). The

wiper is connected to IN+. The voltage can be read by the MCP3201 by grounding IN-

with a test lead and can be verified using a volt meter on test points IN+ and GND.

2.2.4 MCP4822 12-Bit DAC with Internal Vref and SPI Interface

The MCP4822 is a 12-Bit Digital-to-Analog Converter (DAC). Refer to the

MCP4821/MCP4822 Data Sheet (DS21953) for complete information.

The output of the MCP4822 can be measured using a volt meter at test points VOUTA,

VOUTB, and GND.

2.2.5 MCP41010 Single/Dual Digital Potentiometer with SPI Interface

The MCP41010 is a single 10 kΩ digital potentiometer. Refer to the

MCP41XXX/42XXX Data Sheet (DS11195) for complete information.

The resistance of the digital potentiometer can be measured using an ohm meter at test

points PA0, PW0, PB0, and GND.

2.2.6 MCP6S92 Single-Ended, Rail-to-Rail I/O, Low-Gain PGA

The MCP6S92 is a single-ended programmable gain amplifier (PGA). Refer to the

MCP6S91/2/3 Data Sheet (DS21908) for complete information.

The gain of the PGA can be measured by applying a signal to inputs CH0 or CH1 and

GND, and measuring the output on test points Vout and GND.

2.2.7 MCP23S08 8-Bit I/O Expander with Serial Interface

The MCP23008 is an 8-bit I/O Expander. Refer to the MCP23008/MCP23S08 Data

Sheet (DS21919) for complete information.

The output of the MCP23S08 drives LEDs DS1 through DS8. The LEDs provide an

easy to see indication of the MCP23S08 operation. Jumper JP8 must be closed using

a 2-pin shunt for the LEDs to operate. The LEDs can be disabled by removing JP8.

The output of the MCP23S08 is connected to test points GP0 through GP7 and GND.

These test points can be monitored by a volt meter or connected to an external device.

LEDs DS1 through DS8 can be used to monitor the output by closing JP8 with a 2-pin

shunt or disable by removing JP8.

PICkit™ SERIAL SPI DEMO

BOARD USER’S GUIDE

Appendix A. Schematic and Layouts

A.1 INTRODUCTION

This appendix contains the following schematics and layouts for the PICkit™ Serial SPI

Demo Board User’s Guide:

• Board – Schematic - Page 1

• Board – Schematic - Page 2

• Board – Top Silk Layer

• Board – Top Metal Layer

• Board – Bottom Metal Layer

PICkit™ Serial SPI Demo Board User’s Guide

A.2 BOARD - SCHEMATIC - PAGE 1

Schematic and Layouts

A.3 BOARD - SCHEMATIC - PAGE 2

PICkit™ Serial SPI Demo Board User’s Guide

A.4 BOARD - TOP SILK LAYER

A.5 BOARD - TOP LAYER

A.6 BOARD - BOTTOM LAYER

PICkit™ SERIAL SPI DEMO

BOARD USER’S GUIDE

Appendix B. Bill Of Materials (BOM)

TABLE B-1: BILL OF MATERIALS (BOM)

Qty Reference Description Manufacturer Part Number

7 C1, C2, C3,

C4, C5, C6, C7

Capacitor, Ceramic, SMT 0805 Panasonic® - ECG ECJ-2VB1E104K

8DS1, DS2,

DS3, DS4,

DS5, DS6,

DS7, DS8

LED RED ORANGE CLEAR 0805

SMD

LITE-ON INC LTST-C170EKT

4 EA Corner BUMPON SQUARE .40X.10 BLACK 3M SJ-5007 (BLACK)

1 JP1 CONN JUMPER SHORTING GOLD

FLASH

Sullins Electronics Corp. SPC02SYAN

8 JP1, JP2, JP3,

JP4, JP5, JP6,

JP7, JP8

CONN HEADER 2POS .100 VERT TIN Molex/Waldom

Electronics Corp

22-28-4020

1 P1 CONN HEADER 6POS .100 R/A

GOLD

Molex/Waldom

Electronics Corp

22-28-8062

7 R1, R2, R4,

R5, R7, R8,

R17

RES 10K OHM 1/8W 5% 0805 SMD Panasonic - ECG ERJ-6GEYJ103V

9 R3, R9, R10,

R11, R12, R13,

R14, R15, R16

RES 1.0K OHM 1/8W 5% 0805 SMD Panasonic - ECG ERJ-6GEYJ102V

1 R6 POT 10K OHM 3/8" SQ CERM SL MT Bourns Inc. 3296W-1-103LF

29 TP1 - TP29 TEST POINT PC COMPACT SMT Keystone Electronics®5016

1 U1 2K SPI Bus Serial EEPROM Microchip Technology 25LC020-I/SN

1 U2 Thermal Sensor with SPI Interface Microchip Technology TC77-5.0MOA

1 U3 2.7V 12-Bit A/D Converter with SPI

Serial Interface

Microchip Technology MCP3201-I/SN

1 U4 12 Bit DAC with Internal Vref and SPI

Interface

Microchip Technology MCP4822-E/SN

1 U5 Single/Dual Digital Potentiometer with

SPI Interface

Microchip Technology MCP14010-I/SN

1 U6 Single-Ended, Rail-to-Rail I/O,

Low-Gain PGA

Microchip Technology MCP6S92-I/SN

1 U7 8-Bit I/O Expander with Serial Interface Microchip Technology MCP23S08-E/SO

Note 1: The components listed in this Bill of Materials are representative of the PCB assembly. The released BOM

used in manufacturing uses all RoHS-compliant components.

AMERICAS

Corporate Office

2355 West Chandler Blvd.

Chandler, AZ 85224-6199

Tel: 480-792-7200

Fax: 480-792-7277

Technical Support:

http://support.microchip.com

Web Address:

www.microchip.com

Atlanta

Duluth, GA

Tel: 678-957-9614

Fax: 678-957-1455

Boston

Westborough, MA

Tel: 774-760-0087

Fax: 774-760-0088

Chicago

Itasca, IL

Tel: 630-285-0071

Fax: 630-285-0075

Dallas

Addison, TX

Tel: 972-818-7423

Fax: 972-818-2924

Detroit

Farmington Hills, MI

Tel: 248-538-2250

Fax: 248-538-2260

Kokomo

Kokomo, IN

Tel: 765-864-8360

Fax: 765-864-8387

Los Angeles

Mission Viejo, CA

Tel: 949-462-9523

Fax: 949-462-9608

Santa Clara

Santa Clara, CA

Tel: 408-961-6444

Fax: 408-961-6445

Toronto

Mississauga, Ontario,

Canada

Tel: 905-673-0699

Fax: 905-673-6509

ASIA/PACIFIC

Asia Pacific Office

Suites 3707-14, 37th Floor

Tower 6, The Gateway

Habour City, Kowloon

Hong Kong

Tel: 852-2401-1200

Fax: 852-2401-3431

Australia - Sydney

Tel: 61-2-9868-6733

Fax: 61-2-9868-6755

China - Beijing

Tel: 86-10-8528-2100

Fax: 86-10-8528-2104

China - Chengdu

Tel: 86-28-8665-5511

Fax: 86-28-8665-7889

China - Fuzhou

Tel: 86-591-8750-3506

Fax: 86-591-8750-3521

China - Hong Kong SAR

Tel: 852-2401-1200

Fax: 852-2401-3431

China - Qingdao

Tel: 86-532-8502-7355

Fax: 86-532-8502-7205

China - Shanghai

Tel: 86-21-5407-5533

Fax: 86-21-5407-5066

China - Shenyang

Tel: 86-24-2334-2829

Fax: 86-24-2334-2393

China - Shenzhen

Tel: 86-755-8203-2660

Fax: 86-755-8203-1760

China - Shunde

Tel: 86-757-2839-5507

Fax: 86-757-2839-5571

China - Wuhan

Tel: 86-27-5980-5300

Fax: 86-27-5980-5118

China - Xian

Tel: 86-29-8833-7250

Fax: 86-29-8833-7256

ASIA/PACIFIC

India - Bangalore

Tel: 91-80-4182-8400

Fax: 91-80-4182-8422

India - New Delhi

Tel: 91-11-4160-8631

Fax: 91-11-4160-8632

India - Pune

Tel: 91-20-2566-1512

Fax: 91-20-2566-1513

Japan - Yokohama

Tel: 81-45-471- 6166

Fax: 81-45-471-6122

Korea - Gumi

Tel: 82-54-473-4301

Fax: 82-54-473-4302

Korea - Seoul

Tel: 82-2-554-7200

Fax: 82-2-558-5932 or

82-2-558-5934

Malaysia - Penang

Tel: 60-4-646-8870

Fax: 60-4-646-5086

Philippines - Manila

Tel: 63-2-634-9065

Fax: 63-2-634-9069

Singapore

Tel: 65-6334-8870

Fax: 65-6334-8850

Taiwan - Hsin Chu

Tel: 886-3-572-9526

Fax: 886-3-572-6459

Taiwan - Kaohsiung

Tel: 886-7-536-4818

Fax: 886-7-536-4803

Taiwan - Taipei

Tel: 886-2-2500-6610

Fax: 886-2-2508-0102

Thailand - Bangkok

Tel: 66-2-694-1351

Fax: 66-2-694-1350

EUROPE

Austria - Wels

Tel: 43-7242-2244-39

Fax: 43-7242-2244-393

Denmark - Copenhagen

Tel: 45-4450-2828

Fax: 45-4485-2829

France - Paris

Tel: 33-1-69-53-63-20

Fax: 33-1-69-30-90-79

Germany - Munich

Tel: 49-89-627-144-0

Fax: 49-89-627-144-44

Italy - Milan

Tel: 39-0331-742611

Fax: 39-0331-466781

Netherlands - Drunen

Tel: 31-416-690399

Fax: 31-416-690340

Spain - Madrid

Tel: 34-91-708-08-90

Fax: 34-91-708-08-91

UK - Wokingham

Tel: 44-118-921-5869

Fax: 44-118-921-5820

WORLDWIDE SALES AND SERVICE

12/08/06