DTC144EE
Digital Transistors
Features
• Built-in bias resistors enable the configuration of an inverter circuit
without connecting external input resistors
• The bias resistors consist of thin-film resistors with complete
isolation to allow negative biasing of the input. They also have the
advantage of almost completely eliminating parasitic effects.
• Only the on/off conditions need to be set for operation, making
device design easy
Absolute maximum ratings @ 25к
Symbol Parameter Min Typ Max Unit
VCC Supply voltage --- 50 --- V
VIN Input voltage -10 --- 40 V
IO Output current --- 100 --- mA
Pd Power dissipation --- 150 --- mW
Tj Junction temperature --- 150 --- ć
Tstg Storage temperature -55 --- 150 ć
Electrical Characteristics @ 25к
Symbol Parameter Min Typ Max Unit
VI(off) --- --- 0.5 V
VI(on)
Input voltage (VCC=5V, IO=100A)
(VO=0.3V, IO=2mA) 3.0 --- --- V
VO(on) Output voltage (IO/II=10mA/0.5mA) --- --- 0.3 V
II Input current (VI=5V) --- --- 0.18 mA
IO(off) Output current (VCC=50V, VI=0) --- --- 0.5
A
GI DC current gain (VO=5V, IO=5mA) 68 --- ---
R1 Input resistance 32.9 47 61.1
K¡
R2/R1 Resistance ratio 0.8 1.0 1.2
fTTransition frequency
(VCE=10V, IE=5mA, f=100MHz) --- 250 --- MHz
Revision: B 2013/01/01
NPN
SOT-523
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .059 .067 1.50 1.70
B .030 .033 0.75 0.85
C .057 .069 1.45 1.75
D .020 Nominal 0.50Nominal
E .035 .043 0.90 1.10
G .000 .004 .000 .100
H .028 .031 .70 0.80
J .004 .008 .100 .200
K .010 .014 .25 .35
A
C
B
D
E
GH
DIMENSIONS
K
12
1. IN
2. GND
3. OUT
www.mccsemi.com
1 of 3
*Marking: 26
• Lead Free Finish/RoHS Compliant ("P" Suffix designates
RoHS Compliant. See ordering information)
• Epoxy meets UL 94 V-0 flammability rating
• Moisure Sensitivity Level 1
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC TM
Micro Commercial Components
Halogen free available upon request by adding suffix "-HF"
•