Connecting Sockets, Mounting Brackets, DIN Rails
CSM_ConnectionSocket_DS_E_2_1
1
Durable, Easy-to-handle Connecting
Sockets and Mounting Brackets
Highly reliable Track-mounted and Back-connecting Sockets
61F Controllers and Surge Killer Units can be mounted
securely and easily using Mounting Brackets and DIN Rails.
Ordering Information
Connection Sockets
Mounting Brackets
Note: PFC-N8 Mounting Brackets are included with 61F-GP-N@,
61F-GP-N8@, 61F-GPN-V50, 61F-GPN-BT/-BC, and 61F-APN2 Controllers.
DIN Rails
Type Track-mounted Socket Back-connecting Socket
Controller Model Model Model
61F-UHS 8PFA1 PL08
61F-HSL 8PFA
61F-APN2
61F-GP-N8@
PF083A-E
61F-G1P@
61F-G2P@
61F-IP (-22)
14PFA PL15
61F-GP-N@
61F-03B
61F-GPN-BT/-BC
61F-04B
PF113A-E PL11
Model
PFC-A1
PHC-5
PLC
PFC-N8 (See note.)
Model
PFP-100N
PFP-50N
PFP-100N2
PFP-M
PFP-S
2
Track-mounted Sockets
PF083A-E
Two, M4 or 4.5-dia. holes
Eight, M3.5 x 7
sems screws
Two, 4.2-dia.
holes
52 max.
41 max. 21 max.
25 dia.
Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
8PFA
Eight, M3.5 x 7
sems screws
Two, 4.5 dia.
holes
81 max.
Two M4 or 4.5 dia. holes
118 max.
24 max.
Mounting HolesTerminal Arrangement/
Internal Connections
(Top View)
51 max.
8PFA1 Eight, M3.5 x 7
sems screws
Two, 4.5 dia.
holes
93 max. 130 max.
Two M4 or 4.5 dia. holes
24 max.
Mounting HolesTerminal Arrangement/
Internal Connections
(Top View)
51 max.
14PFA Fourteen, M3.5 x 7
sems screws
Two, 4.5 dia.
holes
52 max.
M3.5 x 11.5 sems screws for terminal screws
118 max.
Two 4.5 dia. or M4 mounting holes
31 max.
Mounting HolesTerminal Arrangement/
Internal Connections
(Top View)
72 max.
Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
PF113A-E Eleven, M3.5 x 5
sems screws
52 max.
31 max.
Two, M4 or 4.5-dia. holes
3
Back-connecting Sockets
PL08 Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
50.5 max. 30 dia.
Two, 2-dia. holes
Approx. 20.5
35 max.
Two, 3.5-dia. or M3 Controller
Unit mounting holes
Two, 3.5-dia. or M3 Socket
mounting holes
31 dia.
hole
PL11
51 max.
35 max. Approx. 20.5
Two, 2-dia. holes 31 dia.
hole
Two, 3.5-dia. or M3 Socket
mounting holes
Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
PL15
Two, 3.5-dia. or M3 Socket
mounting holes
Two, 3.5 dia. or M3 Controller
Unit mounting holes
Two 2-dia. holes
16 max.
22 max.
66 max.
45 max.
41 max.
Mounting Holes
Terminal Arrangement/
Internal Connections
(Top View)
4
Mounting Brackets
When the 61F-G1P/-G2P/-IP/-UHS/-HSL is mounted using a Track-mounted Socket, the Switch is held secure by the hooks
on the mounting Socket.
61F-GP-N8, 61F-APN2
To mount to the PF083A-E Track-mounted Socket, use the enclosed
PFC-N8 Mounting Bracket.
61F-GP-N, 61F-GPN-BT/-BC
To mount to the PF113A-E Track-mounted Socket, use the enclosed
PFC-N8 Mounting Brackets.
To mount to the PL11 Back-connecting Socket, use the PHC-5
Mounting Brackets.
61F-03B, -04B
To mount to the PF113A-E Track-mounted Socket, use the PFC-A1
Mounting Brackets.
To mount to the PL11 Back-connecting Socket, use the PLC
Mounting Brackets.
83
4
Approx. 80
4.5
t = 0.3
6
PFC-N8
t = 0.3
4.5
Approx. 80
83
4
6
PFC-N8
6.1 4.6 7.6
4
73.6
2
6
PHC-5
6
4.5
60.8 62
4.6
PFC-A1
56.6
7.6
PLC
5
DIN Track Mounting Accessories
DIN Track
PFP-100N
PFP-50N
DIN Track
PFP-100N2
(see note 1)
(see note 2)
(see note 1)
Note: 1. The PFP-100N is 15 mm on both ends, while the PFP50N
is 15 mm on one end and 5 mm on the other end.
2. Indicates total DIN Track length.
(see note 2)
1 m: PFP-100N
50 cm: PFP-50N
1 m: PFP-100N2
End Plate
PFP-M
M4 x 8
Round
head
screw
M4 spring washer
Spacer
PFP-S
In the interest of product improvement, specifications are subject to change without notice.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified)
from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS
DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS
IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT
LIABILITY.
In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the products.
At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,
safety equipment, and installations subject to separate industry or government regulations.
Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifications and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made.
However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or
establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual
specifications of purchased products.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the
result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
ERRORS AND OMISSIONS
The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
2010.3
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2010 All Right Reserved.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Omron:
PLC