142-4701-801 - CINCH CONNECTORS - Datasheet.Directory

INCHES (MILLIMETERS)

CUSTOMER DRAWINGS AVAILABLE UPON REQUEST

SMA Reverse Polarity - 50 Ohm

Specifications

ELECTRICAL RATINGS

Impedance: 50 ohms

Frequency Range:

Flexible cable connectors ..................................................... 0-12.4 GHz

Uncabled receptacles ........................................................... 0-18.0 GHz

VSWR: (f = GHz) Straight Right Angle

Cabled Connectors Cabled Connectors

RG-316, LMR-100 cable ........... 1.15 + .02f 1.15 + .03f

RG-58, LMR-195 cable ............ 1.17 + .025f 1.17 + .06f

RG-142 cable ............................ 1.17 + .02f 1.15 + .03f

LMR-200, LMR-240

cable .............

1.10 + .03f 1.10 + .06f

Uncabled receptacles .......................................................................... N/A

Working Voltage: (Vrms maximum)†

Connectors for Cable Type Sea Level70K Feet

RG-316; LMR-100, 195, 200 ................................... 250 65

RG-58, RG-142, LMR-240, uncabled receptacles .. 335 85

Dielectric Withstanding Voltage: (VRMS minimum at sea level)†

Connectors for RG-316;

LMR-100, 195, 200

...................................... 750

Connectors for RG-58, RG-142, LMR-240, uncabled receptacles . 1000

Corona Level: (Volts minimum at 70,000 feet)=

Connectors for RG-316, LMR-100, 195, 200 ................................... 190

Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 250

Insertion Loss: (dB maximum)

Straight flexible cable

connectors ................................ .06 f (GHz), tested at 6 GHz

Right angle flexible cable

connectors ................................ 0.15 f (GHz), tested at 6 GHz

Low loss flexible straight

cable connectors ............................. 0.06 f (GHz), tested at 1 GHz

Low loss flexible right angle

cable connectors ....................... 0.15 f (GHz), tested at 1 GHz

Uncabled receptacles, field replaceable ............................................ N/A

Insulation Resistance: 5000 megohms minimum

Contact Resistance: (milliohms maximum)After

Initial Environmental

Center contact (straight cabled connectors

and uncabled receptacles) ............................ 3.0* 4.0*

Center contact (right angle cabled

connectors ...................................................... 4.0 6.0

Outer contact (all connectors) ............................ 2.0 N/A

Braid to body (gold plated connectors) .............. 0.5 N/A

Braid to body (nickel plated connectors) ............ 5.0 N/A

RF Leakage: (dB minimum, tested at 2.5 GHz)

Flexible cable connectors ............................................................. -60 dB

Uncabled receptacles and adapters ................................................. N/A

RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4

and 7 MHz)†

Connectors for RG-316; LMR-100, 195, 200 ................................... 500

Connectors for RG-58, RG-142, LMR-240, uncabled receptacles ... 670

MECHANICAL RATINGS

Engagement Design: MIL-C-39012, Series SMA

Engagement/Disengagement Force: 2 inch-pounds maximum

Mating Torque: 7 to 10 inch-pounds

Bulkhead Mounting Nut Torque: 15 inch-pounds

Coupling Proof Torque: 15 inch-pounds minimum

Coupling Nut Retention: 60 pounds minimum

Contact Retention:

6 lbs. minimum axial force (captivated contacts)

4 inch-ounce minimum torque (uncabled receptacles)

Cable Retention:Axial Force* Torque

(pounds) (in-oz)

Connectors for RG-316, LMR-100 ............ 20 N/A

Connectors for LMR195, 200 .................... 30 N/A

Connectors for RG-58, LMR-240 .............. 40 N/A

Connectors for RG-142 ............................. 45 N/A

*Or cable breaking strength whichever is less.

Durability: 500 cycles minimum

ENVIRONMENTAL RATINGS (Meets or exceed the applicable paragraph

of MIL-C-39012)

Temperature Range: - 65

C to + 165

Thermal Shock: MIL-STD-202, Method 107, Condition B

Corrosion: MIL-STD-202, Method 101, Condition B

Shock: MIL-STD-202, Method 213, Condition I

Vibration: MIL-STD-202, Method 204, Condition D

Moisture Resistance: MIL-STD-202, Method 106

MATERIAL SPECIFICATIONS

Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min.

or nickel plated per QQ-N-290

Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204

.00003" min.

Female - beryllium copper per QQ-C-530, gold plated per MIL-

G-45204 .00003" min.

Nut Retention Spring: Beryllium copper per QQ-C-533. Unplated

Insulators: PTFE fluorocarbon per ASTM D 1710 and ASTM D 1457 or

Tefzel per ASTM D 3159

Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204

.00001" min. or nickel plated per QQ-N-290

Crimp Sleeves: Copper per WW-T-799 or brass per QQ-B-613, gold

plated per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290

Mounting Hardware: Brass per QQ-B-626 or QQ-B-613, gold plated per

MIL-G-45204 .00001" min. or nickel plated per QQ-N-290

NOTES

1. ID OF CONTACT TO MEET VSWR,

CONTACT RESISTANCE AND

INSERTION WITHDRAWAL FORCES

WHEN MATED WITH DIA .0355-

.0370 MALE PIN.

MATING ENGAGEMENT FOR SMA REVERSE POLARITY SERIES PER FCC RULE 15 NON-STANDARD INTERFACE

JACK

PLUG

JACK

PLUG

†Avoid user injury due to misapplication.

See safety advisory definitions inside front cover.

Cinch Connectivity Solutions

299 Johnson Avenue SW, Waseca, MN 56093 USA • 800.247.8256 • +1 507 833 8822 • cinchconnectivity.com

Cinch Connectivity Solutions

299 Johnson Avenue SW, Waseca, MN 56093 USA • 800.247.8256 • +1 507 833 8822 • cinchconnectivity.com