Model BD2425N5050AHF Rev B Ultra Low Profile 0404 Balun 50 to 50 Balanced Description The BD2425N5050AHF is a low profile, low impedance sub-miniature unbalanced to balanced transformer designed for differential inputs and output locations on modern chipsets targeted at 802.11 b+g, MIMO b+g, Bluetooth, Zigbee, ULPR and ISM band Applications in an easy to use surface mount package. The BD2425N5050AHF is ideal for high volume manufacturing and delivers higher performance than traditional ceramic baluns. The BD2425N5050AHF has an unbalanced port impedance of 50 and a 50 balanced port impedance.. The output ports have equal amplitude (-3dB) with 180 degree phase differential. The BD2425N5050AHF is available on tape and reel for pick and place high volume manufacturing. Detailed Electrical Specifications: Specifications subject to change without notice. Features: * * * * * * * * * * 2400 - 2500 MHz 0.56 mm Height Profile 50 Ohm to 2 x 25 Ohm Low Insertion Loss Targeted At 802.11 b+g, MIMO b+g, Bluetooth, Zigbee, ULPR and ISM Band Applications Surface Mountable Tape & Reel Non-conductive Top Surface RoHS Compliant Halogen free ROOM (25C) Parameter Min. Frequency Unbalanced Port Impedance Balanced Port Impedance Return Loss Insertion Loss* Amplitude Balance Phase Balance CMRR Power Handling Operating Temperature 2400 Typ. Max Unit 2500 MHz dB dB dB Degrees dB Watts C 50 50 23 0.7 0.3 3 30 15 0.9 0.8 7 0.75 +85 -55 * Insertion Loss stated at room temperature (Insertion Loss is approximately 0.1 dB higher at +85 C) Outline Drawing Top View (Near-side) Side View Bottom View (Far-side) .022.002 [0.560.05] .041.004 [1.040.10] .012 [0.30] 1 .012 [0.30] 2 3x.010 [0.25] .041.004 [1.040.10] 4 .020 [0.51] .020 [0.51] 3 3x.010 [0.25] Pin Designation GND / DC Feed 1 + RF GND Dimensions are in Inches [Millimeters] Mechanical Outline 2 Unbalanced Port 3 Balanced Port 4 Balanced Port Available on Tape and Reel for Pick and Place Manufacturing. Tolerances are Non-Cumulative USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model BD2425N5050AHF Rev B Typical Performance:2300 MHz. to 2600 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 -2.7 -36 -3.6 2600 2300 -3.3 2500 -3 -33 2400 -30 Frequency [MHz] Frequency [MHz] Phase Balance 1.5 15 1 10 0.5 5 -15 -2 -20 2600 -1.5 2500 -10 2400 -1 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -15 -18 -21 -24 -27 -30 -33 2600 2500 2400 -36 2300 [dB] 0 -5 2400 0 -0.5 2300 deg 20 2300 [dB] Amplitude Balance 2 Frequency [MHz] USA/Canada: Toll Free: Europe: 2600 -2.4 -27 2600 -2.1 -24 2500 -1.8 -21 2500 -18 2400 [dB] 0 2300 [dB] Return Loss - Input 0 (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Model BD2425N5050AHF Rev B Wide Band Performance: 500 MHz. to 8500 MHz. Insertion Loss -3 -0.3 -6 -0.6 -9 -0.9 -12 -1.2 -15 -1.5 7050 7550 8050 8050 5050 5550 5550 5050 4550 4050 3550 3050 2550 2050 1550 50 8050 7550 7050 6550 -20 6050 -2 5550 -15 5050 -1.5 4550 -10 4050 -1 1050 0 -5 550 0 -0.5 3550 7550 5 3050 6550 0.5 2550 7050 10 2050 6550 1 1550 6050 15 deg 2 1.5 550 4550 Phase Balance 20 1050 6050 Amplitude Balance 50 4050 Frequency [MHz] Frequency [MHz] [dB] 3550 50 8050 7550 7050 6550 6050 5550 5050 4550 4050 3550 3050 2550 2050 -3.6 1550 -36 550 -3.3 1050 -3 -33 3050 -2.7 -30 2550 -2.4 -27 2050 -2.1 -24 1550 -1.8 -21 1050 -18 550 [dB] 0 50 [dB] Return Loss - Input 0 Frequency [MHz] Frequency [MHz] CMRR 0 -3 -6 -9 -12 -18 -21 -24 -27 -30 -33 8050 7550 7050 6550 6050 5550 5050 4550 4050 3550 3050 2550 2050 1550 550 1050 -36 50 [dB] -15 Frequency [MHz] Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392 Model BD2425N5050AHF Rev B Mounting Configuration: In order for Xinger surface mount components to work optimally, the proper impedance transmission lines must be used to connect to the RF ports. If this condition is not satisfied, insertion loss, Isolation and VSWR may not meet published specifications. All of the Xinger components are constructed from ceramic filled PTFE composites which possess excellent electrical o and mechanical stability having X and Y thermal coefficient of expansion (CTE) of 17 ppm/ C. An example of the PCB footprint used in the testing of these parts is shown below. An example of a DC-biased footprint is also shown below. In specific designs, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. With No DC Bias 3X .011 [0.29] .008 [0.21] 3X .011 [0.29] With DC Bias Plated thru hole to ground 3X Transmission Line .008 [0.21] 3X .011 [0.29] .013 [0.33] 3X Transmission Line .020 [0.50] .020 [0.50] Footprint Pad (s) Footprint Pad (s) USA/Canada: Toll Free: Europe: .008 [0.21] Circuit Pattern Circuit Pattern Solder Resist .013 [0.33] .020 [0.50] .008 [0.21] .020 [0.50] Plated thru hole to ground 3X .011 [0.29] Dimensions are in Inches [Millimeters] Mounting Footprint (315) 432-8909 (800) 411-6596 +44 2392-232392 Available on Tape and Reel for Pick and Place Manufacturing. Solder Resist Dimensions are in Inches [Millimeters] Mounting Footprint Model BD2425N5050AHF Rev B Packaging and Ordering Information Parts are available in reel and are packaged per EIA 481-2. Parts are oriented in tape and reel as shown below. Minimum order quantities are 4000 per reel. See Model Numbers below for further ordering information. OA OC OD QUANTITY/REEL 4000 TABLE 1 REEL DIMENSIONS (inches [mm]) OA 7.00 [177.8] B 0.32 [8.0] 2.0 [50.8] OC OD 0.512 [13.0] B Available on Tape and Reel for Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 411-6596 +44 2392-232392