P6KE6V8CARL - STMicroelectronics - Datasheet.Directory

This is information on a product in full production.

April 2012 Doc ID 3068 Rev 7 1/9

P6KE

Transil™, transient voltage surge suppressor (TVS)

Datasheet − production data

Features

■Peak pulse power: 600 W (10/1000 µs )

■Stand-off voltage range 6.8 to 440 V

■Unidirectional and bidirectional types

■Low clamping factor

■Fast response time

■UL recognized

Complies with the following standards

■IEC 61000-4-2 level 4

– 15 kV (air discharge)

– 8 kV (contact discharge)

■MIL STD 883G, method 3015-7 Class 3

– HBM (human body model)

Description

Transil diodes provide high overvoltage protection

by clamping action. Their instantaneous response

to transient overvoltages makes them particularly

suited to protect voltage sensitive devices such as

MOS Technology and low voltage supplied IC’s.

TM:Transil is a trademarks of STMicroelectronics.

DO-15

(DO-204AC)

www.st.com

Characteristics P6KE

2/9 Doc ID 3068 Rev 7

1 Characteristics

Figure 1. Electrical characteristics - definitions

Figure 2. Pulse definition for electrical characteristics

Table 1. Absolute maximum ratings (Tamb = 25 °C)

Symbol Parameter Value Unit

PPP Peak pulse power dissipation(1) T

j initial = Tamb 600 W

P Power dissipation on infinite heatsink Tamb = 75 °C 5 W

IFSM

Non repetitive surge peak forward current for unidirectional

types

tp = 10 ms

Tj initial = Tamb

100 A

Tstg Storage temperature range -65 to + 175 °C

TjMaximum operating junction temperature 175 °C

TLMaximum lead temperature for soldering during 10 s at 5 mm from case. 260 °C

1. For a surge greater than the maximum values, the diode will fail in short-circuit.

Table 2. Thermal resistances

Symbol Parameter Value Unit

Rth(j-l) Junction to leads 20 °C/W

Rth(j-a) Junction to ambient on printed circuit. L lead = 10 mm 75

Unidirectional

Bidirectional

Symbol Parameter

V Stand-off voltage

V Breakdown voltage

V Clamping voltage

I Leakage current @ V

I Peak pulse current

T Voltage temperature coefficient

V Forward voltage drop

R Dynamic resistance

RM RM

Repetitive pulse current

tr= rise time (µs)

tp= pulse duration time (µs)

trtp

P6KE Characteristics

Doc ID 3068 Rev 7 3/9

Table 3. Electrical characteristics - values (Tamb = 25 °C)

Order code

IRM @ VRM(1) VBR @ IR(2) VCL @ IPP

10/1000 µs

VCL @ IPP

8/20µs αT(3) C(4)

max min nom max max max max typ

Unidirectional Bidirectional µA V V V V mA V A V A 10-4/ °C pF

P6KE6V8A P6KE6V8CA 10 5.8 6.45 6.8 7.14 10 10.5 57 13.4 298 5.7 4000

P6KE7V5A P6KE7V5CA 10 6.4 7.13 7.5 7.88 10 11.3 53 14.5 276 6.1 3700

P6KE10A P6KE10CA 1 8.55 9.5 10 10.5 1 14.5 41 18.6 215 7.5 2800

P6KE12A P6KE12CA 0.5 10 11.4 12 12.6 1 16.7 36 21.7 184 7.8 2300

P6KE15A P6KE15CA 0.5 13 14.3 15 15.8 1 21.2 28 27.2 147 8.4 1900

P6KE18A P6KE18CA 0.5 15 17.1 18 18.9 1 25.2 24 32.5 123 8.8 1600

P6KE22A P6KE22CA 0.5 19 20.9 22 23.1 1 30.6 20 39.3 102 9.2 1350

P6KE24A P6KE24CA 0.5 20 22.8 24 25.2 1 33.2 18 42.8 93 9.4 1250

P6KE27A P6KE27CA 0.5 23 25.7 27 28.4 1 37.5 16 48.3 83 9.6 1150

P6KE30A P6KE30CA 0.5 26 28.5 30 31.5 1 41.5 14.5 53.5 75 9.7 1075

P6KE33A P6KE33CA 0.5 28 31.4 33 34.7 1 45.7 13.1 59 68 9.8 1000

P6KE36A P6KE36CA 0.5 31 34.2 36 37.8 1 49.9 12 64.3 62 9.9 950

P6KE39A P6KE39CA 0.5 33 37.1 39 41.0 1 53.9 11.1 69.7 57 10.0 900

P6KE47A P6KE47CA 0.5 40 44.7 47 49.4 1 64.8 9.3 84 48 10.1 800

P6KE56A P6KE56CA 0.5 48 53.2 56 58.8 1 77 7.8 100 40 10.3 700

P6KE68A P6KE68CA 0.5 58 64.6 68 71.4 1 92 6.5 121 33 10.4 625

P6KE82A P6KE82CA 0.5 70 77.9 82 86.1 1 113 5.3 146 27 10.5 550

P6KE100A P6KE100CA 0.5 85 95.0 100 105 1 137 4.4 178 22.5 10.6 500

P6KE120A P6KE120CA 0.5 102 114 120 126 1 165 3.6 212 19 10.7 450

P6KE150A P6KE150CA 0.5 128 143 150 158 1 207 2.9 265 15 10.8 400

P6KE180A P6KE180CA 0.5 154 171 180 189 1 246 2.4 317 12.6 10.8 360

P6KE200A P6KE200CA 0.5 171 190 200 210 1 274 2.2 353 11.3 10.8 350

P6KE220A P6KE220CA 0.5 188 209 220 231 1 328 1.85 388 10.3 10.8 330

P6KE250A P6KE250CA 0.5 213 237 250 263 1 344 1.75 442 9 11 310

P6KE300A P6KE300CA 0.5 256 285 300 315 1 414 1.45 529 7.6 11 290

P6KE350A P6KE350CA 0.5 299 332 350 368 1 482 1.25 618 6.5 11 270

P6KE400A P6KE400CA 0.5 342 380 400 420 1 548 1.1 706 5.7 11 360

P6KE440A P6KE440CA 0.5 376 418 440 462 1 603 1.0 776 5.2 11 350

1. For bidirectional types having VRM ≤ 10V, IRM is multiplied by 2

2. Pulse test: tp < 50 ms.

3. ΔVBR = αT * (Tamb - 25) * VBR(25°C).

4. VR = 0 V, F = 1 MHz. For bidirectional types, capacitance value is divided by 2.

Characteristics P6KE

4/9 Doc ID 3068 Rev 7

Figure 3. Peak power dissipation vs. initial

junction temperature

(printed circuit board)

Figure 4. Peak pulse power vs. exponential

pulse duration.

100

20 40 60 80 100 120 140 160 180 200

Tj initial (°C)

0.001 0.01 0.1 1 10 100

Ppp (W)

Figure 5. Clamping voltage vs. peak pulse

current(1) Figure 6. Capacitance vs. reverse applied

voltage for unidirectional types

(typical values).

1. The curves in Figure 5 are specified for a junction temperature of 25°C before surge. The given results may be

extrapolated for other junction temperatures by using the following formula : ΔVBR = αT x [Tamb -25] x VBR(25°C)

For intermediate voltages, extrapolate the given results.

0.1 1 10 100 1000

100

1000

V(V)

Ipp (A)

%Ipp

100

trt<10 s

Tj initial = 25øC

P6KE 440A

P6KE 220A

P6KE 68A

P6KE 39A

P6KE 22A

P6KE 12A

P6KE 6V8A

P6KE 100A

t = 20µs

t = 1ms

t = 10ms

Exponential waveform:

C (pF)

110100

100

1000

10000

V(V)

Tj = 25°Cø

F= 1 MHz

P6KE6V8A

P6KE15A

P6KE68A

P6KE200A

5000

Figure 7. Capacitance vs. reverse applied

voltage for bidirectional types

(typical values).

Figure 8. Peak forward voltage drop vs. peak

forward current for unidirectional

types (typical value).(1)

1. Multiply by 2 for units with VBR > 220 V.

5000

C (pF)

110100

100

1000

10000

V(V)

Tj = 25°Cø

F= 1 MHz

P6KE6V8CA

P6KE15CA

P6KE68CA

P6KE200CA

P6KE Characteristics

Doc ID 3068 Rev 7 5/9

Figure 9. Transient thermal impedance

junction to ambient vs. pulse

duration

Figure 10. Relative variation of leakage

current vs. junction temperature

0.01 0.1 1 10 100 1000

100

Zth (j-a) (°C/W)

Printed circuit board FR4,

Llead = 10 mm

Ordering information scheme P6KE

6/9 Doc ID 3068 Rev 7

2 Ordering information scheme

Figure 11. Ordering information scheme

3 Package information

●Epoxy meets UL94, V0

●Lead-free package

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®

specifications, grade definitions and product status are available at: www.st.com.

ECOPACK® is an ST trademark.

P6 KE 100 CA RL

Peak Pulse Power

Breakdown Voltage

Packaging

P6 = 600 W

100 = 100 V

Blank = Ammopack tape

RL = Tape and reel

Types

A = Unidirectional

CA = Bidirectional

Table 4. DO-15 dimensions

Ref.

Dimensions

Millimeters Inches

Min. Max. Min. Max.

A 6.05 6.75 0.238 0.266

B 2.95 3.53 0.116 0.139

C 26 31 1.024 1.220

D 0.71 0.88 0.028 0.035

P6KE Package information

Doc ID 3068 Rev 7 7/9

Table 5. Marking

Unidirectional

order code Marking(1)

1. Includes a space character after P6KE for ECOPACK2 compliant devices

Bidirectional

order code Marking(1)

P6KE6V8A P6KE6V8A P6KE6V8CA P6KE6V8CA

P6KE7V5A P6KE7V5A P6KE7V5CA P6KE7V5CA

P6KE10A P6KE10A P6KE10CA P6KE10CA

P6KE12A P6KE12A P6KE12CA P6KE12CA

P6KE15A P6KE15A P6KE15CA P6KE15CA

P6KE18A P6KE18A P6KE18CA P6KE18CA

P6KE22A P6KE22A P6KE22CA P6KE22CA

P6KE24A P6KE24A P6KE24CA P6KE24CA

P6KE27A P6KE27A P6KE27CA P6KE27CA

P6KE30A P6KE30A P6KE30CA P6KE30CA

P6KE33A P6KE33A P6KE33CA P6KE33CA

P6KE36A P6KE36A P6KE36CA P6KE36CA

P6KE39A P6KE39A P6KE39CA P6KE39CA

P6KE47A P6KE47A P6KE47CA P6KE47CA

P6KE56A P6KE56A P6KE56CA P6KE56CA

P6KE68A P6KE68A P6KE68CA P6KE68CA

P6KE82A P6KE82A P6KE82CA P6KE82CA

P6KE100A P6KE100A P6KE100CA P6KE100CA

P6KE120A P6KE120A P6KE120CA P6KE120CA

P6KE150A P6KE150A P6KE150CA P6KE150CA(2)

2. Includes a space character after P6KE for ECOPACK1 compliant devices in tape and reel packaging.

P6KE180A P6KE180A P6KE180CA P6KE180CA

P6KE200A P6KE200A P6KE200CA P6KE200CA

P6KE220A P6KE220A P6KE220CA P6KE220CA

P6KE250A P6KE250A P6KE250CA P6KE250CA

P6KE300A P6KE300A P6KE300CA P6KE300CA

P6KE350A P6KE350A P6KE350CA P6KE350CA

P6KE400A P6KE400A(2) P6KE400CA P6KE400CA

P6KE440A P6KE440A(2) P6KE440CA P6KE440CA

Ordering information P6KE

8/9 Doc ID 3068 Rev 7

4 Ordering information

5 Revision history

Table 6. Ordering information

Order code Marking(1)

1. Logo, date code, type code, cathode band (for unidirectional types only).

Package Weight Base qty Delivery mode

P6KExxxx See Ta b l e 5 DO-15 0.4 g 1000 Ammopack

P6KExxxxRL 6000 Tape and reel

Table 7. Document revision history

Date Revision Changes

Feb-2003 4A Last update

Oct-2004 5

1/ Note 5, figure 7 on page 4, updated from VBR > 220V to

VBR ≥ 200V.

2/ Types table on page 2: IPP (@10/1000µs) changed for

P6KE220xx to P6KE440xx

14-Sep-2011 6

Updated IRM @ VRM values, VBRmax @ IR for P6KE33 and

order codes in Ta bl e 3 . Updated footnotes to Ta b l e 5 .

Updated TL temperature in Table 1.

26-Apr-2012 7 Corrected typographical area Ta bl e 3 .

P6KE

Doc ID 3068 Rev 7 9/9

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the

right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any

time, without notice.

All ST products are sold pursuant to ST’s terms and conditions of sale.

Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no

liability whatsoever relating to the choice, selection or use of the ST products and services described herein.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this

document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products

or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such

third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED

WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS

OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT

RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING

APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,

DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE

GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void

any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any

liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -

Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America