D Subminiature
Connectors
Dimensions are shown in mm (inch)
Dimensions subject to change 1
D Subminiature Contents
Contents Page
General Application D Subminiature Connectors
ɀStraight PCB Selection Guide.............................................2
D*NG Pressfit Termination...............................................4
D*M Solder Termination (Machined) — Standard PC Tails.......................6
ZD* Solder Termination (Stamped).........................................8
D* Solder Termination (Machined) — European PC Tails .......................10
D* Wrap Post Termination ..............................................12
ɀ90°PCB Selection Guide ...............................................14
D*M Solder Termination (Machined) — Standard Footprint .318ɍor .283ɍɍ inch . . .16
ZED* Solder Termination (Stamped) — Standard Footprint .318 inch ..............18
D* Solder Termination (Machined) — European Footprint 10,2ɍor 9,4ɍɍ mm......20
ZD* Solder Termination (Stamped) — European Footprint 10,2 mm ...............28
ɀCable Selection Guide .................................................30
D Solder Cup Solder Termination (Machined) with Tin Shells ....................32
ZD* Solder Cup Solder Termination (Stamped) with Tin Shells ...................34
D*A Crimp Connectors without Contacts ...................................36
D*W Discrete Wire IDC ................................................38
Special Application D Subminiature Connectors
ɀCombo DSelection Index..............................................42
Combo DPCB Connectors with 75 Ohm Coaxial Contacts (50 Ohm Option) ........44
Combo DPCB Connectors with High Power ................................60
Combo DPCB Connectors with (Size 20) Signal Contacts Only..................74
Combo DCable Solder Cup ............................................78
Combo DCable Crimp Connectors and Shield Cans ..........................80
Loose Contacts and Tooling.............................................83
ɀCommercial Micro D Selection Index ......................................96
MDSM Connectors and Tooling ..........................................98
ɀFilter D Selection Index................................................104
Product Performance .................................................106
D*JK PCB Connectors ................................................108
D*JT Solder Cup and Combo High Power Connectors.........................122
High Reliability D Subminiature Connectors
ɀMilitary/High Reliability Selection Index....................................130
PCB 90°, Straight, Wrap Post, and Cable Solder Cup .........................132
MIL-C-24308 Cross References and Test Data..............................142
Military/High Reliability Combo D.......................................146
ɀSpace/High Reliability Selection Index ....................................168
PCB Straight, 90°and Cable Solder Cup...................................172
Cable Crimp........................................................182
High Density Cable Crimp..............................................184
Space/High Reliability Combo D........................................188
Space Accessories and Loose (Size 8) Contacts.............................190
NASA/GSFC & ESA-SCC Cross References.................................195
Accessories Selection Guide ..............................................198
Backshells.........................................................200
Locking Hardware ...................................................208
Miscellaneous ......................................................214
Reader’s Resource Selection Index .........................................219
Dimensional Reference Data............................................220
Lease Tooling ......................................................275
Glossary of Terms ...................................................276
Obsolete Products/Available Products Not Previously Listed....................282
Part Number Index...................................................283
Product Safety and Warranty ...........................................297
Combo Dis a registered trademark of ITT Cannon in the United States.
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
The ITT Cannon
D Subminiature family of
connectors has grown to
include a wide variety of styles,
options and accessories and is
often the most economical
solution to any interconnect
problem. Ideally suited for
both commercial/industrial
applications and military/
aerospace applications,
ITT Cannon D Subminiature
connectors have found
worldwide acceptance in a
multitude of applications
ranging from office equipment
to satellites.
On the Cover
Filter D, Combo D,
Commercial Micro D
(MDSM), Pressfit D,
and Standard D
Dimensions are shown in mm (inch)
Dimensions subject to change
2
D* - Wrap Post Termination
See pages 12-13.
Product Features
ɀHigh performance commercial class
connectors
ɀTwo contact lengths for 2 or 3 wraps
ɀMachined contacts
D* straight connectors are available for high
performance uses according to DIN 41652.
Contacts available in two popular lengths.
ZD* - Straight Solder Termination (Stamped)
See pages 8-9.
Product Features
ɀStamped contacts with 5 A current capacity
ɀEconomical
ɀOptional vertical standoffs with optional
harpoon style boardlocks or screw locks
ZD* straight connectors are available for
applications where price is the primary driver. They
are available with or without boardlocks and screw
locks.
D Subminiature Straight PCB Selection Guide
D*NG - Straight Pressfit Termination
The D*NG is based upon the specification
CECC75-301-802. These connectors provide a
low-cost alternative to traditional through hole
solder contacts. Utilizing stamped ‘‘Eye of the
Needle’’ compliant contact tails per IEC-352-5, the
parts are quickly and easily mounted onto PCBs
without soldering, crimping or specialized tooling.
The socket contact engaging area utilizes a
‘‘spoon’’ shape with four points of
interconnection. Hardware options provide
flexibility and ensure that the final product fits the
electrical requirements of any application.
Product Features
ɀQuick and easy press-in installation without
specialized tooling
ɀ‘‘Spoon’’ socket contact provides improved
interface compared to ‘‘Tuning Fork’’
ɀClosed-entry socket for secure blind mating
ɀFront-shell only design based on
CECC 75-301-802
ɀ‘‘Eye of the Needle’’ compliant contact tails
ɀPress-in bolt for ground continuity
ɀ#4-40 UNC and M3 hardware options
See pages 4-5.
D*M Straight Solder Termination (Machined) — Standard PC Tails
See pages 6-7.
Product Features
ɀ7.5 A current capacity
ɀMachined contacts
ɀ2 contact finishes
ɀOptional vertical standoffs, screw locks, and
boardlocks (4 prongs)
ɀUL file number E8572
ɀDimensionally compatible with Combo D
D*M straight PCB connectors, equivalent to
MIL-C-24308 qualified versions (except for
finishes) for printed circuit boards and backplanes
in demanding applications. Additional contact
lengths, hardware and finish options available;
consult factory for details.
D* - Straight Solder Termination (Machined) — European PC Tails
See pages 10-11.
Product Features
ɀHigh performance commercial connectors
ɀTwo contact finish performance classes
ɀOptional vertical standoffs, threaded inserts
and pushfits/boardlocks
ɀOL2 contact length, other lengths available
ɀTin plated contact PC tails (pin & socket)
ɀMachined contacts
D* straight connectors are available for high
performance uses according to DIN 41652.
Available with European length OL contacts.
Select contact finish from 2 performance classes.
Dimensions are shown in mm (inch)
Dimensions subject to change 3
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None (color: dark green)
Contact Socket: Copper Alloy Gold over Nickel. Terminating
end Tin (Socket)
Hardware Steel/Copper Alloy Tin/Zinc
Specifications
Temperature Rating 55°C to 125°C
Current Rating 5 A
Contact Resistance 10 mȉ
Dielectric Withstanding
Voltage 1250 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94-0 None (color: black)
Contacts Copper Alloy Gold over Nickel
Hardware Steel/Copper Alloy Tin/Zinc
Specifications
Temperature Rating 55°C to 105°C
Current Rating 5 A
Contact Resistance 15 mȉ
Dielectric Withstanding
Voltage 1000 VAC at Sea Level
D Subminiature Straight PCB Selection Guide
Specifications
Current Rating 5 A / 25°C, 3.5 A / 70°C ambient
Temperature Rating 55°C to 125°C
Contact Resistance 10 mȉ
Test Voltage 1200 Vrms at Sea Level
XPlated Through Hole 1,09 - 0,94 (.043 - .037)
PC Tail Press-in Force 100N/contact max.
PC Tail Push-out Force 30N/contact min.
PC Board Thickness 3,20 - 1,60 (.125 - .062)
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None (color: black)
Contact Copper Alloy Gold over Nickel (Standard)
or Gold over PdNi (-408)
Hardware Steel/Copper Alloy Tin/Zinc
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None (color: dark green)
Contact Copper Alloy Gold over Nickel. Terminating
end Tin (Socket only)
Hardware Steel/Copper Alloy Tin/Zinc
Specifications
Temperature Rating 55°C to 125°C
Current Rating 7.5 A
Contact Resistance 55 millivolt max at 7.5 A test current
Dielectric Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None (color: dark green)
Contacts Copper Alloy Gold over Nickel in mating area,
Tin on balance
Hardware Steel/Copper Alloy Tin/Zinc
Specifications
Temperature Rating 55°C to 125°C
Current Rating 5 A
Contact Resistance 10 mȉ
Dielectric Withstanding
Voltage 1250 VAC at Sea Level
Dimensions are shown in mm (inch)
Dimensions subject to change
4
D Subminiature D*NG
Straight Pressfit Termination
Mounting Types
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605)
Part Numbers
Shell
Size Layout Through
Hole Clinch Nut
# 4-40 UNC Clinch Nut
M3 Press-In Bolt
# 4-40 UNC Press-In Bolt
M3
DE 9 DENG9P-P1 DENGE9P-P1 DENGX9P-P1 DENGZ9P-P1 DENGL9P-P1
DA 15 DANG15P-P1 DANGE15P-P1 DANGX15P-P1 DANGZ15P-P1 DANGL15P-P1
DB 25 DBNG25P-P1 DBNGE25P-P1 DBNGX25P-P1 DBNGZ25P-P1 DBNGL25P-P1
DC 37 DCNG37P-P1 DCNGE37P-P1 DCNGX37P-P1 DCNGZ37P-P1 DCNGL37P-P1
DD 50 DDNG50P-P1 DDNGE50P-P1 DDNGX50P-P1 DDNGZ50P-P1 DDNGL50P-P1
Note: For performance class 1 (gold over PdNi finish) add -408. Example: DENG9P-P1-408.
Through Hole Clinch Nut Press-In Bolt
Plug
Engaging Face DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
2,15 (.085)
MAX
2,84 (.112) 5,69
(.224)
2,84 (.112)
2,15 (.085)
MAX
D
E
BC
A
10°
12345678
9101112131415
5,70 ± 0,20
(.224 ± .008)
6,00 - 0,25
(.236 - .010)
5,60 (.220)
MAX
Dimensions are shown in mm (inch)
Dimensions subject to change 5
D Subminiature D*NG
Straight Pressfit Termination
Part Numbers
Shell
Size Layout Through
Hole Clinch Nut
# 4-40 UNC Clinch Nut
M3 Press-In Bolt
# 4-40 UNC Press-In Bolt
M3
DE 9 DENG9S-P1 DENGE9S-P1 DENGX9S-P1 DENGZ9S-P1 DENGL9S-P1
DA 15 DANG15S-P1 DANGE15S-P1 DANGX15S-P1 DANGZ15S-P1 DANGL15S-P1
DB 25 DBNG25S-P1 DBNGE25S-P1 DBNGX25S-P1 DBNGZ25S-P1 DBNGL25S-P1
DC 37 DCNG37S-P1 DCNGE37S-P1 DCNGX37S-P1 DCNGZ37S-P1 DCNGL37S-P1
DD 50 DDNG50S-P1 DDNGE50S-P1 DDNGX50S-P1 DDNGZ50S-P1 DDNGL50S-P1
Note: For performance class 1 (gold over PdNi finish) add -408. Example: DENG9S-P1-408.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605)
Mounting Types
Through Hole Clinch Nut Press-In Bolt
Receptacle
Engaging Face DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
D
E
BC
A
10°
5,70 ± 0,20
(.224 ± .008)
6,00 - 0,25
(.236 - .010)
5,60 (.220)
MAX
2,15 (.085)
MAX
2,84 (.112) 5,69
(.224)
2,84 (.112)
2,15 (.085)
MAX
Dimensions are shown in mm (inch)
Dimensions subject to change
6
D Subminiature D*M
Straight Solder Termination (Machined) — Standard PC Tails
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Part Numbers
Shell Size Layout Standoff Standoff &
Boardlock Standoff, Boardlock &
Screw Lock
DE 9 DEMV9PNK87 DEMZ9PNK87 DEMN9PNK87
DA 15 DAMV15PNK87 DAMZ15PNK87 DAMN15PNK87
DB 25 DBMV25PNK87 DBMZ25PNK87 DBMN25PNK87
DC 37 DCMV37PNK87 DCMZ37PNK87 DCMN37PNK87
DD 50 DDMV50PNK87 DDMZ50PNK87 DDMN50PNK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN9PNK127
Plug
L
5,69
(.224) 2,84
(.112)
F
W
2,84
(.112)
Engaging Face
Hardware removed for clarity
Hardware removed for clarity
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
AC
B
ED
10°
POSITION 1
Ø 0,76
(.030)
2,92
(.115)
6,50 ± 0,25
(.256 ± .010) SCREW LOCK
# 4-40 UNC
BOARDLOCK
4,52
(.178)
7,62 ± 0,25
(.300 ± .010) STANDOFF
# 4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change 7
D Subminiature D*M
Straight Solder Termination (Machined) — Standard PC Tails
Part Numbers
Shell Size Layout Standoff
Standoff &
Boardlock
Standoff, Boardlock &
Screw Lock
DE 9 DEMV9SNA197 DEMZ9SNA197 DEMN9SNA197
DA 15 DAMV15SNA197 DAMZ15SNA197 DAMN15SNA197
DB 25 DBMV25SNA197 DBMZ25SNA197 DBMN25SNA197
DC 37 DCMV37SNA197 DCMZ37SNA197 DCMN37SNA197
DD 50 DDMV50SNA197 DDMZ50SNA197 DDMN50SNA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN9SNK126
Dimensions
Shell Size
A
±0,38 (.015)
B
±0,13 (.005)
C
±0,13 (.005)
D
±0,13 (.005)
E
±0,38 (.015)
F
±0,25 (.010)
W
±0,38 (.015)
L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
L
5,69
(.224) 2,84
(.112)
F
W
2,84
(.112)
Engaging Face
Hardware removed for clarity
Hardware removed for clarity
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
A
C
B
ED
10°
POSITION 1
Ø 0,76
(.030)
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
BOARDLOCK
7,62 ± 0,25
(.300 ± .010)
SCREW LOCK
# 4-40 UNC
4,52
(.178)
STANDOFF
# 4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change
8
D Subminiature ZD*
Straight Solder Termination (Stamped)
Part Numbers
Shell Size Layout Through Hole Standoff With
Boardlock
DE 9 ZDE9P-OL2 ZDEE9P-OL2-146
DA 15 ZDA15P-OL2 ZDAE15P-OL2-146
DB 25 ZDB25P-OL2 ZDBE25P-OL2-146
DC 37 ZDC37P-OL2 ZDCE37P-OL2-146
DD 50 ZDD50P-OL2 ZDDE50P-OL2-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269)
Plug
Engaging Face
F
W
1,00 (.040)
REF
2,84 (.112)
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Hardware removed for clarity
A
C
B
10°
E D
POSITION 1
3,18 (.125)
MIN
STANDOFF
# 4-40 UNC
6,00
(.236)
4,32 (.170)
0,64 (.025)
REF
REF
Dimensions are shown in mm (inch)
Dimensions subject to change 9
D Subminiature ZD*
Straight Solder Termination (Stamped)
Part Numbers
Shell Size Layout Through Hole Standoff With
Boardlock
DE 9 ZDE9S-OL2 ZDEE9S-OL2-146
DA 15 ZDA15S-OL2 ZDAE15S-OL2-146
DB 25 ZDB25S-OL2 ZDBE25S-OL2-146
DC 37 ZDC37S-OL2 ZDCE37S-OL2-146
DD 50 ZDD50S-OL2 ZDDE50S-OL2-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273)
DD 66,93 (2.635) 52,42 (2,064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273)
Receptacle
Engaging Face
2,84
(.112)
F
W
1,00 (.040)
REF
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Hardware removed for clarity
3,18 (.125)
MIN
STANDOFF
# 4-40 UNC
4,32 (.170)
0,64 (.025)
REF
REF
6,00
(.236)
A
C
B
10°
ED
POSITION 1
Dimensions are shown in mm (inch)
Dimensions subject to change
10
D Subminiature D*
Straight Solder Termination (Machined) — European PC Tails
Part Numbers
Shell Size Layout Through Hole Standoff #4-40 UNC
With Pushfit/Boardlock Standoff M3 With
Pushfit/Boardlock
DE 9 DE9P-0L2-K87 DEE9P-0L2-K87-146 DEX9P-0L2-K87-146
DA 15 DA15P-0L2-K87 DAE15P-0L2-K87-146 DAX15P-0L2-K87-146
DB 25 DB25P-0L2-K87 DBE25P-0L2-K87-146 DBX25P-0L2-K87-146
DC 37 DC37P-0L2-K87 DCE37P-0L2-K87-146 DCX37P-0L2-K87-146
DD 50 DD50P-0L2-K87 DDE50P-0L2-K87-146 DDX50P-0L2-K87-146
Note: For performance class 2 add -A191. Example DA15P-OL2-A191-K87.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0.25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
5,69 (.224)
2,84 (.112)
L
F
W
2,84 (.112)
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
PC Tail
Modifier X
±0,30 (.012) Y
±0,30 (.012)
OL2 5,20 (.205) 10,20 (.401)
OL4 6,75 (.266) 11,80 (.465)
10°
D
E
C
B
A
Ø 3,05 (.120)
POSITION 1
Ø 0,60 (.024)
YX
Dimensions are shown in mm (inch)
Dimensions subject to change 11
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
D Subminiature D*
Straight Solder Termination (Machined) — European PC Tails
Part Numbers
Shell Size Layout Through Hole Standoff #4-40 UNC
With Pushfit/Boardlock Standoff M3 With
Pushfit/Boardlock
DE 9 DE9S-0L2-A197 DEE9S-0L2-A197-146 DEX9S-0L2-A197-146
DA 15 DA15S-0L2-A197 DAE15S-0L2-A197-146 DAX15S-0L2-A197-146
DB 25 DB25S-0L2-A197 DBE25S-0L2-A197-146 DBX25S-0L2-A197-146
DC 37 DC37S-0L2-A197 DCE37S-0L2-A197-146 DCX37S-0L2-A197-146
DD 50 DD50S-0L2-A197 DDE50S-0L2-A197-146 DDX50S-0L2-A197-146
Note: For performance class 2 add -A191. Example DA15S-0L2-A191-A197
Receptacle
DD Configuration
5,69 (.224)
2,84 (.112)
L
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
PC Tail
Modifier X
±0,30 (.012) Y
±0,30 (.012)
OL2 5,20 (.205) 10,20 (.401)
OL4 6,75 (.266) 11,80 (.465)
F
W
2,84 (.112)
10°
D
E
C
B
A
Ø 3,05
(.120)
POSITION 1
Ø 0,60 (.024)
YX
Dimensions are shown in mm (inch)
Dimensions subject to change
12
D Subminiature D*
Wrap Post Termination
Part Numbers
Shell Size Layout Through Hole
DE 9 DE9P-F179A-K87
DA 15 DA15P-F179A-K87
DB 25 DB25P-F179A-K87
DC 37 DC37P-F179A-K87
DD 50 DD50P-F179A-K87
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,64 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,64 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,64 (.269) 0,99 (.039)
Modification
Code Number of
Wraps X
max. Y
±0,89 (.035)
F179 2 10,21 (.402) 15,20 (.598)
F179A 3 13,61 (.536) 18,60 (.732)
Plug
Engaging Face
2,84 (.112)
5,69 (.224)
L
F
W
2,84 (.112)
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
POSITION 1
Ø 3,05 (.120)
D
E
B
C
A
10°
0,61 (.024)
REF
XY
Dimensions are shown in mm (inch)
Dimensions subject to change 13
D Subminiature D*
Wrap Post Termination
Part Numbers
Shell Size Layout Through Hole
DE 9 DE9S-F179A-A197
DA 15 DA15S-F179A-A197
DB 25 DB25S-F179A-A197
DC 37 DC37S-F179A-A197
DD 50 DD50S-F179A-A197
Modification
Code Number of
Wraps X
max. Y
±0,89 (.035)
F179 2 10,21 (.402) 15,20 (.598)
F179A 3 13,61 (.536) 18,60 (.732)
Dimensions
Shell Size A
±0,13 (.005) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
XY
REF
0,61 (.024)
2,84 (.112)
5,69 (.224)
L
WF
2.84 (.112)
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 2-3.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
D
E
B
C
A
10°
Ø 3,05
(.120)
POSITION 1
Dimensions are shown in mm (inch)
Dimensions subject to change
14
D Subminiature 90°PCB Selection Guide
D*M — 90°Solder Termination (Machined) — Standard Footprint .318ɍor .283 inchɍɍ
D*M 90°PCB connectors, equivalent to
MIL-C-24308 qualified versions (except for
finishes), for use with printed circuit boards in
demanding applications. Additional contact
lengths, hardware and finish options available;
consult factory for details.
Product Features
ɀ7.5 A current capacity
ɀMachined contacts
ɀTwo contact finishes
ɀMetal bracket with threaded insert standard
ɀOptional screw locks and boardlocks
ɀUL file number E8572
ɀDimensionally compatible with Combo D
ZED* — 90°Solder Termination (Stamped) — Standard Footprint .318 inchɍ
ZED* 90°connectors are available for applications
where price is the primary driver. They are
available with integrated plastic brackets with
Standard footprints.
Product Features
ɀStamped contacts with 5 A current capacity
ɀEconomical
ɀPlastic bracket with integrated boardlocks and
grounding strap
ɀOptional screw locks
ZD* — 90°Solder Termination (Stamped) — European Footprint 10,2 mmɍ
ZD* 90°connectors are available for applications
where price is the primary driver. They are
available with integrated plastic brackets with
European footprints.
Product Features
ɀStamped contacts with 5 A current capacity
ɀEconomical
ɀPlastic bracket with integrated boardlocks and
grounding strap
ɀOptional screw locks
D* — 90°Solder Termination (Machined) — European Footprint 10,2ɍor 9,4 mmɍɍ
D* 90°connectors are available for high
performance uses according to DIN 41652.
Available with European footprint 1AON contacts,
plastic and metal brackets, #4-40 or M3 threads
and stamped pushfits/boardlocks. Contact finish
available in 2 performance classes.
Product Features
ɀHigh performance commercial class
connectors
ɀTwo contact performance classes
ɀOptional metal and plastic brackets, threaded
standoffs, clinch nuts, and stamped pushfits/
boardlocks
ɀTin plated contact PC tails (pin & socket)
See pages 16-17.
See pages 18-19.
See pages 20-27.
See pages 28-29.
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change 15
D Subminiature 90°PCB Selection Guide
Specifications
Temperature
Rating 55°C to 125°C
Current Rating 7.5 A
Contact
Resistance 55 millivolt max. at 7.5 A test
current
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None (Color: dark green)
Pin Contact Copper Alloy Gold over Nickel
Socket Contact Copper Alloy Gold over Nickel in mating area,
Tin on balance
Hardware (except Boardlocks) Steel Tin
Boardlocks Copper Alloy Tin
Specifications
Temperature
Rating 55°C to 105°C
Current Rating 5 A
Contact
Resistance 15 mȉ
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel in mating area,
Tin on balance
Specifications
Temperature
Rating 55°C to 105°C
Current Rating 5 A
Contact
Resistance 15 mȉ
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel in mating area,
Tin on balance
Specifications
Temperature
Rating 55°C to +125°C
Current Rating 5 A
Contact
Resistance 10 mȉ
Dielectric
Withstanding
Voltage 1250 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None (Color: dark green)
Contacts Copper Alloy Gold over Nickel in mating area,
Tin on balance
Hardware Steel or Plastic Tin or None
Boardlocks Copper Alloy Tin
Dimensions are shown in mm (inch)
Dimensions subject to change
16
D Subminiature D*M
90°Solder Termination (Machined) — Standard Footprint .318ɍor .283 inchɍɍ
Part Numbers
Shell Size Layout Bracket Bracket &
Boardlock
Bracket &
Screw Lock
#4-40 UNC
Bracket,
Boardlock &
Screw Lock
#4-40 UNC
DE 9 DEMP9PJK87 DEMCP9PJK87 DEMD9PJK87 DEMG9PJK87
DA 15 DAMP15PJK87 DAMC15PJK87 DAMD15PJK87 DAMG15PJK87
DB 25 DBMP25PJK87 DBMC25PJK87 DBMD25PJK87 DBMG25PJK87
DC 37 DCMP37PJK87 DCMC37PJK87 DCMD37PJK87 DCMG37PJK87
DD 50 DDMP50PJK87 DDMC50PJK87 DDMD50PJK87 DDMG50PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DAMG15PJK127
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010) M
±0,25 (.010) N
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 12,34 (.486) 8,64 (.340)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 12,34 (.486) 8,64 (.340)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,34 (.486) 8,64 (.340)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,34 (.486) 8,64 (.340)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) 13,74 (.541) 10,06 (.396)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Engaging Face
Screw lock and boardlock
removed for clarity
Screw lock and boardlock
removed for clarity
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration. See Reader’s Resource page 226.
10°
AC
E D
B
BOARDLOCK
Ø 0,76
(.030)
2,92
(.115)
RIVNUT
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
MN
SCREW LOCK
#4-40 UNC
BRACKET,
METAL
5,68
(.224)
2,84
(.112)
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
L
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
7,18 ± 0,25
(.283 ± .010) WF
Dimensions are shown in mm (inch)
Dimensions subject to change 17
D Subminiature D*M
90°Solder Termination (Machined) — Standard Footprint .318ɍor .283 inchɍɍ
Part Numbers
Shell Size Layout Bracket Bracket &
Boardlock
Bracket &
Screw Lock
#4-40 UNC
Bracket,
Boardlock &
Screw Lock
#4-40 UNC
DE 9 DEMP9SJA197 DEMC9SJA197 DEMD9SJA197 DEMG9SJA197
DA 15 DAMP15SJA197 DAMC15SJA197 DAMD15SJA197 DAMG15SJA197
DB 25 DBMP25SJA197 DBMC25SJA197 DBMD25SJA197 DBMG25SJA197
DC 37 DCMP37SJA197 DCMC37SJA197 DCMD37SJA197 DCMG37SJA197
DD 50 DDMP50SJA197 DDMC50SJA197 DDMD50SJA197 DDMG50SJA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DAMG15SJK126
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010) M
±0,25 (.010) N
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 13,74 (.541) 10,06 (.396)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
Engaging Face
Screw lock and boardlock
removed for clarity
Screw lock and boardlock
removed for clarity
BOARDLOCK
A
C
B
D
E
Ø 0,76
(.030)
10°2,92
(.115)
Note: ɋDimension varies with alternate bracket configuration. See Reader’s Resource page 226.
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
6,50 ± 0,25
(.256 ± .010)
MNRIVNUT
#4-40 UNC
SCREW LOCK
#4-40 UNC
BRACKET,
METAL
5,68
(.224)
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
L
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
F
W
DD Configuration
Dimensions are shown in mm (inch)
Dimensions subject to change
18
D Subminiature ZED*
90°Solder Termination (Stamped) — Standard Footprint .318 inch
Part Numbers
Shell Size Layout
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
DE 9 ZEDEL9PBA ZEDE9PBA
DA 15 ZEDAL15PBA ZEDA15PBA
DB 25 ZEDBL25PBA ZEDB25PBA
DC 37 ZEDCL37PBA ZEDC37PBA
Note: For contacts with 30 microinches of gold add -30. Example: ZEDEL9PBA-30
Dimensions
Shell Size A
±0,38 (.015) B
±0,25 (.010) C
±0,25 (.010)
DE 30,89 (1.216) 16,92 (.666) 24,99 (.984)
DA 39,09 (1.539) 25,25 (.994) 33,32 (1.312)
DB 53,09 (2.090) 38,96 (1.534) 47,04 (1.852)
DC 69,40 (2.732) 55,42 (2.182) 63,50 (2.500)
Plug
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
A
C
B
10°2X GROUNDING HOOK
12,93 - 12,17
(.509 - .479)
8,61 - 8,11
(.339 - .319)
2X SCREW LOCK
#4-40 UNC
9,77 - 9,27
(.387 - .365)
6,09 - 5,59
(.240 - .220)
18,45 - 17,69
(.726 - .696)
4,06 - 3,30
(.160 - .130)
2,84 (.112) 8,33 - 7,83
(.328 - .308)
Dimensions are shown in mm (inch)
Dimensions subject to change 19
D Subminiature ZED*
90°Solder Termination (Stamped) — Standard Footprint .318 inch
Part Numbers
Shell Size Layout
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
DE 9 ZEDEL9SBA ZEDE9SBA
DA 15 ZEDAL15SBA ZEDA15SBA
DB 25 ZEDBL25SBA ZEDB25SBA
DC 37 ZEDCL37SBA ZEDC37SBA
Note: For contacts with 30 microinches gold add -30. Example: ZEDEL9SBA-30
Dimensions
Shell Size A
±0,38 (.015) B
±0,25 (.010) C
±0,25 (.010)
DE 30,89 (1.216) 16,28 (.641) 24,99 (.984)
DA 39,09 (1.539) 24,66 (.971) 33,32 (1.312)
DB 53,09 (2.090) 38,38 (1.511) 47,04 (1.852)
DC 69,40 (2.732) 54,84 (2.159) 63,50 (2.500)
Receptacle
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
9,77 - 9,27
( .385 - .365)
2X SCREW LOCK
#4-40 UNC
2,84 (.112)
18,71 - 17,95
(.737 - .707)
4,06 - 3,30
(.160 - .130)
6,35 - 5,85
(.250 - .230)
8,33 - 7,83
(.328 - .308)
12,93 - 12,17
(.509 - .479)
2X GROUNDING HOOK
10°
B
A
C8,15 - 7,65
(.321 - .301)
Dimensions are shown in mm (inch)
Dimensions subject to change
20
D Subminiature D*
90°Solder Termination (Machined) — European Footprint 10,2ɍor 9,4 mmɍɍ
Part Numbers
Shell Size Layout Through Hole
DE 9 DE9P-1AON-K87
DA 15 DA15P-1AON-K87
DB 25 DB25P-1AON-K87
DC 37 DC37P-1AON-K87
DD 50 DD50P-1AON-K87
Note: For performance class 2 add -A191. Example: DE9P-1A0N-A191-K87
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
C
B
10°
E
Ø 0,60 (.024)
A
D
Ø 3,05 (.120)
5,08 (.200)
2,54 (.100)
9,40 (.370)
4,70 (.185)
L
DD ConfigurationEngaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
2,54 (.100) 4,70 (.185)
WF
9,40 (.370)
Dimensions are shown in mm (inch)
Dimensions subject to change 21
D Subminiature D*
90°Solder Termination (Machined) — European Footprint 10,2ɍor 9,4 mmɍɍ
Part Numbers
Shell Size Layout Through Hole
DE 9 DE9S-1AON-A197
DA 15 DA15S-1AON-A197
DB 25 DB25S-1AON-A197
DC 37 DC37S-1AON-A197
DD 50 DD50S-1AON-A197
Note: For performance class 2 add -A191. Example: DE9S-1AON-A191-A197
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
DD Configuration
C
B
A
D
E
10°
Ø 0,60 (.024)
Ø 3,05 (.120)
2,54 (.100)
4,70 (.185)
9,40 (.370) WF
9,40 (.370)
5,08 (.200) 4,70 (.185)
2,54 (.100)
L
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Dimensions are shown in mm (inch)
Dimensions subject to change
22
D Subminiature D*
90°Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍor 9,4ɍɍ mm
Part Numbers
Shell Size Layout Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC
DE 9 DE9P-1AFN-K87 DE9P-1A7N-K87 DE9P-1A9N-K87 DE9P-1A8N-K87
DA 15 DA15P-1AFN-K87 DA15P-1A7N-K87 DA15P-1A9N-K87 DA15P-1A8N-K87
DB 25 DB25P-1AFN-K87 DB25P-1A7N-K87 DB25P-1A9N-K87 DB25P-1A8N-K87
DC 37 DC37P-1AFN-K87 DC37P-1A7N-K87 DC37P-1A9N-K87 DC37P-1A8N-K87
DD 50 DD50P-1AFN-K87 DD50P-1A7N-K87 DD50P-1A9N-K87 DD50P-1A8N-K87
Notes: For pushfit/boardlock option add -146. Example: DE9P-1AFN-K87-146
For performance class 2 add -A191. Example: DE9P-1AFN-A191-K87
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0.38 (.015) F
±0.25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Engaging Face DD Configuration
L
5,08 (.200)
2,54 (.100)
9,40 (.370)
3,70 (.146)
2,54 (.100)
9,40 (.370) WF
3,70 (.146)
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Dimensions are shown in mm (inch)
Dimensions subject to change 23
D Subminiature D*
90°Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍor 9,4ɍɍ mm
Part Numbers
Shell Size Layout Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC
DE 9 DE9S-1AFN-A197 DE9S-1A7N-A197 DE9S-1A9N-A197 DE9S-1A8N-A197
DA 15 DA15S-1AFN-A197 DA15S-1A7N-A197 DA15S-1A9N-A197 DA15S-1A8N-A197
DB 25 DB25S-1AFN-A197 DB25S-1A7N-A197 DB25S-1A9N-A197 DB25S-1A8N-A197
DC 37 DC37S-1AFN-A197 DC37S-1A7N-A197 DC37S-1A9N-A197 DC37S-1A8N-A197
DD 50 DD50S-1AFN-A197 DD50S-1A7N-A197 DD50S-1A9N-A197 DD50S-1A8N-A197
Notes: For pushfit/boardlock option add -146. Example: DE9S-1AFN-A197-146
For performance class 2 add -A191. Example: DE9S-1AFN-A191-A197
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
DD Configuration
5,08 (.200)
2,54 (.100)
9,40 (.370) L
3,70 (.146)
2,54 (.100)
WF
9,40 (.370)
3,70 (.146)
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Dimensions are shown in mm (inch)
Dimensions subject to change
24
D Subminiature D*
90°Solder Termination (Machined) with Plastic Bracket and Grounding Strap — European Footprint 10,2
ɍ
or 9,4 mm
ɍɍ
Part Numbers
Shell Size Layout Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC
DE 9 DE9P-1ADN-K87 DE9P-1AWN-K87 DE9P-1AVN-K87 DE9P-1AJN-K87
DA 15 DA15P-1ADN-K87 DA15P-1AWN-K87 DA15P-1AVN-K87 DA15P-1AJN-K87
DB 25 DB25P-1ADN-K87 DB25P-1AWN-K87 DB25P-1AVN-K87 DB25P-1AJN-K87
DC 37 DC37P-1ADN-K87 DC37P-1AWN-K87 DC37P-1AVN-K87 DC37P-1AJN-K87
DD 50 DD50P-1ADN-K87 DD50P-1AWN-K87 DD50P-1AVN-K87 DD50P-1AJN-K87
Notes: For pushfit/boardlock option add -146. Example: DE9P-1ADN-K87-146
For performance class 2 add -A191. Example: DE9P-1ADN-A191-K87
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0.38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Engaging Face DD Configuration
L
5,08 (.200)
2,54 (.100)
9,40 (.370)
3,70 (.146)
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
C
B
10°
E
Ø 0,60 (.024)
A
D
1,00 (.039)
BRACKET, PLASTIC,
WITH GROUNDING
STRAP
WF
2,54 (.100)
9,40 (.370)
3,70 (.146)
Dimensions are shown in mm (inch)
Dimensions subject to change 25
D Subminiature D*
90°Solder Termination (Machined) with Plastic Bracket and Grounding Strap — European Footprint 10,2
ɍ
or 9,4 mm
ɍɍ
Part Numbers
Shell Size Layout Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC
DE 9 DE9S-1ADN-A197 DE9S-1AWN-A197 DE9S-1AVN-A197 DE9S-1AJN-A197
DA 15 DA15S-1ADN-A197 DA15S-1AWN-A197 DA15S-1AVN-A197 DA15S-1AJN-A197
DB 25 DB25S-1ADN-A197 DB25S-1AWN-A197 DB25S-1AVN-A197 DB25S-1AJN-A197
DC 37 DC37S-1ADN-A197 DC37S-1AWN-A197 DC37S-1AVN-A197 DC37S-1AJN-A197
DD 50 DD50S-1ADN-A197 DD50S-1AWN-A197 DD50S-1AVN-A197 DD50S-1AJN-A197
Notes: For pushfit/boardlock option add -146. Example: DE9S-1ADN-A197-146
For performance class 2 add -A191. Example: DE9S-1ADN-A191-A197
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0.38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
Engaging Face DD Configuration
C
B
A
D
E
10°
Ø 0,60 (.024)
1,00 (.039)
9,40 (.370)
5,08 (.200)
2,54 (.100)
L
3,70 (.146)
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
BRACKET, PLASTIC,
WITH GROUNDING
STRAP
9,40 (.370)
2,54 (.100) 3,70 (.146)
WF
Dimensions are shown in mm (inch)
Dimensions subject to change
26
D Subminiature D*
90°Solder Termination (Machined) with Plastic Bracket — European Footprint 10,2ɍor 9,4 mmɍɍ
Part Numbers
Shell Size Layout Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC
DE 9 DE9P-1A5N-K87 DE9P-1AUN-K87 DE9P-1ATN-K87 DE9P-1A6N-K87
DA 15 DA15P-1A5N-K87 DA15P-1AUN-K87 DA15P-1ATN-K87 DA15P-1A6N-K87
DB 25 DB25P-1A5N-K87 DB25P-1AUN-K87 DB25P-1ATN-K87 DB25P-1A6N-K87
DC 37 DC37P-1A5N-K87 DC37P-1AUN-K87 DC37P-1ATN-K87 DC37P-1A6N-K87
DD 50 DD50P-1A5N-K87 DD50P-1AUN-K87 DD50P-1ATN-K87 DD50P-1A6N-K87
Notes: For pushfit/boardlock option add -146. Example: DE9P-1A5N-K87-146
For performance class 2 add -A191. Example: DE9P-1A5N-A191-K87
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
5,08 (.200)
2,54 (.100)
9,40 (.370)
3,70 (.146)
L
DD Configuration
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
C
B
10°
E
Ø 0,60 (.024)
A
D
1,00 (.039)
BRACKET,
PLASTIC 2,54 (.100)
9,40 (.370)
3,70 (.146)
WF
Dimensions are shown in mm (inch)
Dimensions subject to change 27
D Subminiature D*
90°Solder Termination (Machined) with Plastic Bracket — European Footprint 10,2ɍor 9,4 mmɍɍ
Part Numbers
Shell Size Layout Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC
DE 9 DE9S-1A5N-A197 DE9S-1AUN-A197 DE9S-1ATN-A197 DE9S-1A6N-A197
DA 15 DA15S-1A5N-A197 DA15S-1AUN-A197 DA15S-1ATN-A197 DA15S-1A6N-A197
DB 25 DB25S-1A5N-A197 DB25S-1AUN-A197 DB25S-1ATN-A197 DB25S-1A6N-A197
DC 37 DC37S-1A5N-A197 DC37S-1AUN-A197 DC37S-1ATN-A197 DC37S-1A6N-A197
DD 50 DD50S-1A5N-A197 DD50S-1AUN-A197 DD50S-1ATN-A197 DD50S-1A6N-A197
Notes: For push/boardlock option add -146. Example: DE9S-1A5N-A197-146
For performance class 2 add -A191. Example: DE9S-1A5N-A191-A197
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
E
C
B
A
D
10°
Ø 0,60 (.024)
1,00 (.039)
5,08 (.200)
2,54 (.100)
9,40 (.370)
3,70 (.146)
L
DD ConfigurationEngaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
BRACKET,
PLASTIC 2,54 (.100)
WF
9,40 (.370)
3,70 (.146)
Dimensions are shown in mm (inch)
Dimensions subject to change
28
D Subminiature ZD*
90°Solder Termination (Stamped) — European Footprint 10,2 mm
Part Numbers
Shell Size Layout
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
DE 9 ZDEL9P-1AKN-146 ZDE9P-1AKN-146
DA 15 ZDAL15P-1AKN-146 ZDA15P-1AKN-146
DB 25 ZDBL25P-1AKN-146 ZDB25P-1AKN-146
DC 37 ZDCL37P-1AKN-146 ZDC37P-1AKN-146
Note: For contacts with 30 microinches gold add -A191. Example: ZDEL9P-1AKN-A191-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,25 (.010) C
±0,13 (.005)
DE 30,89 (1.216) 16,92 (.666) 24,99 (.984)
DA 39,09 (1.539) 25,25 (.994) 33,32 (1.312)
DB 53,09 (2.090) 38,96 (1.534) 47,04 (1.852)
DC 69,40 (2.732) 55,42 (2.182) 63,50 (2.500)
Plug
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
A
C
B
10°2X GROUNDING HOOK
12,93 - 12,17
(.509 - .479)
8,61 - 8,11
(.339 - .319)
1,00 (.039)
2X SCREW LOCK
#4-40 UNC
9,77 - 9,27
(.387 - .365)
Engaging Face
Dimensions are shown in mm (inch)
Dimensions subject to change 29
D Subminiature ZD*
90°Solder Termination (Stamped) — European Footprint 10,2 mm
Part Numbers
Shell Size Layout
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Threaded Insert
#4-40 UNC
Plastic Bracket,
Integrated Grounding
Strap, Boardlock,
Screw Lock
#4-40 UNC
DE 9 ZDEL9S-1AKN-146 ZDE9S-1AKN-146
DA 15 ZDAL15S-1AKN-146 ZDA15S-1AKN-146
DB 25 ZDBL25S-1AKN-146 ZDB25S-1AKN-146
DC 37 ZDCL37S-1AKN-146 ZDC37S-1AKN-146
Note: For contacts with -A191 microinches gold add -A191. Example: ZDEL9S-1AKN-A191-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,25 (.010) C
±0,13 (.005)
DE 30,89 (1.216) 16,33 (.643) 24,99 (.984)
DA 39,09 (1.539) 24,66 (.971) 33,32 (1.312)
DB 53,09 (2.090) 38,38 (1.511) 47,04 (1.852)
DC 69,40 (2.732) 54,84 (2.159) 63,50 (2.500)
Receptacle
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 14-15.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
2X GROUNDING HOOK
10°
B
A
C8,15 - 7,65
(.321 - .301)
12,93 - 12,17
(.509 - .479)
1,00 (.039)
9,77 - 9,27
( .385 - .365)
2X SCREW LOCK
#4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change
30
D Subminiature Cable Selection Guide
D* — Solder Cup Termination (Machined) with Tin Shells
D* solder cup connectors are used for cable or
panel mount wiring applications. Solder cup
connectors provide maximum flexibility and
performance for applications requiring discrete
solder terminations and field repair without
termination tooling.
Product Features
ɀMachined solder cup termination, 5 A current
capacity
ɀHigh performance commercial class
connectors
ɀTwo contact performance classes
ɀOptional clinch nuts with #4-40 UNC or M3
threads
ZD* — Solder Cup Termination (Stamped) with Tin Shells
ZD* solder cup connectors are used for cable or
panel mount wiring applications. Solder cup
connectors provide maximum flexibility and
performance for applications requiring discrete
solder terminations.
Product Features
ɀStamped solder cup termination, 5 A current
capacity
ɀEconomical
D*A — Crimp Connectors without Contacts
D*A crimp contact connectors are designed for
reliable, fast cabling. Available in the industry
standard D*A housing, the connectors provide a
low-cost, quick cabling alternative compared to
soldering.
Product Features
ɀCrimp contacts available in reels of 5,000
ɀApplication tooling:
– Hand or automatic
– Stripper crimper
D*W — Discrete Wire IDC
The D*W connector provides insulation
displacement connection technology for either
solid or stranded wires. With D*W, speed of
cabling is increased significantly over solder cup
or crimp solutions. Contacts are easily removable
and replaceable. Several specialized accessories
(including shield cans, ferrules, and plastic boots)
are available to provide a complete product
solution.
Product Features
ɀQuick harnessing capability with simple hand
or semi-automatic tooling
ɀAccepts 30 AWG to 20 AWG wire; sizes can
be mixed
ɀShield cans insure reliable shielding continuity
See pages 32-33.
See pages 34-35.
See pages 36-37.
See pages 38-41.
Dimensions are shown in mm (inch)
Dimensions subject to change 31
D Subminiature Cable Selection Guide
Specifications
Temperature
Rating 55°C to 125°C
Current Rating 5 A
Contact
Resistance 10 mȉ
Dielectric
Withstanding
Voltage 1250 VAC
Materials and Finishes
Description Material Finish
Shell/Hardware Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel
Specifications
Temperature
Rating 55°C to 105°C
Current Rating 5 A
Contact
Resistance 15 mȉ
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel
Specifications
Temperature
Rating 55°C to 105°C
Current Rating 5 A (20 AWG)
Contact
Resistance 15 mȉ
Dielectric
Withstanding
Voltage 500 VAC at Sea Level
Specifications
Temperature
Rating 55°C to 125°C
Current Rating 3 A (20 AWG)
2 A (22 AWG)
1,4 A (24 AWG)
1,2 A (26 AWG)
1 A (28 AWG)
0,8 A (30 AWG)
Contact
Resistance 15 mȉ
Dielectric
Withstanding
Voltage 1000 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shell/Hardware Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel in mating area,
Tin on balance
Materials and Finishes
Description Material Finish
Shell/Hardware Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel
Dimensions are shown in mm (inch)
Dimensions subject to change
32
D Subminiature D*
Solder Cup Termination (Machined) with Tin Shells
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
DE 9 DE9PK87 DEE9PK87 DEX9PK87
DA 15 DA15PK87 DAE15PK87 DAX15PK87
DB 25 DB25PK87 DBE25PK87 DBX25PK87
DC 37 DC37PK87 DCE37PK87 DCX37PK87
DD 50 DD50PK87 DDE50PK87 DDX50PK87
Note: For performance class 2, add A191. Example: DA15PA191K87.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
DD Configuration
5,69 (.224)
2,84 (.112)
L
2,84 (.112)
F
W
L
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
10°
D
E
C
B
A
Ø 3,05 (.120)
POSITION 1
10,72 (.422)
MAX
Dimensions are shown in mm (inch)
Dimensions subject to change 33
D Subminiature D*
Solder Cup Termination (Machined) with Tin Shells
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
DE 9 DE9SA197 DEE9SA197 DEX9SA197
DA 15 DA15SA197 DAE15SA197 DAX15SA197
DB 25 DB25SA197 DBE25SA197 DBX25SA197
DC 37 DC37SA197 DCE37SA197 DCX37SA197
DD 50 DD50SA197 DDE50SA197 DDX50SA197
Note: For performance class 2, add A191. Example: DA15SA191A197.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
5,69 (.224)
2,84 (.112)
L
DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
10°
D
E
C
B
A
Ø 3,05 (.120)
POSITION 1
9,91 (.390)
MAX
2,84 (.112)
F
W
L
Dimensions are shown in mm (inch)
Dimensions subject to change
34
D Subminiature ZD*
Solder Cup Termination (Stamped) with Tin Shells
Part Numbers
Shell Size Layout Through Hole
DE 9 ZDE9P
DA 15 ZDA15P
DB 25 ZDB25P
DC 37 ZDC37P
DD 50 ZDD50P
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Plug
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
2,84 (.112)
WF
DD Configuration
AC
B
ED
Ø 3,05 (.120)
10°
POSITION 1
10,72 (.422)
MAX
5,69 (.224)
L
2,84 (.112)
K
Dimensions are shown in mm (inch)
Dimensions subject to change 35
D Subminiature ZD*
Solder Cup Termination (Stamped) with Tin Shells
Part Numbers
Shell Size Layout Through Hole
DE 9 ZDE9S
DA 15 ZDA15S
DB 25 ZDB25S
DC 37 ZDC37S
DD 50 ZDD50S
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Receptacle
Engaging Face DD Configuration
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
2,84 (.112)
WF
AC
B
ED
Ø 3,05 (.120)
10°
POSITION 1
5,69 (.224)
L
2,84 (.112)
K
10,72 (.422)
MAX
Dimensions are shown in mm (inch)
Dimensions subject to change
36
D Subminiature D*A
Crimp Connectors without Contacts
Part Numbers
Shell Size Layout Through Hole
DE 9 DEA9PK87FO
DA 15 DAA15PK87FO
DB 25 DBA25PK87FO
DC 37 DCA37PK87FO
Note: For crimp (size 20) contacts and tooling, see pages 83 & 275.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Plug
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
10°
D
E
C
B
A
Ø 3,05 (.120)
POSITION 1
10,93 (.430)
L
K
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change 37
D Subminiature D*A
Crimp Connectors without Contacts
Part Numbers
Shell Size Layout Through Hole
DE 9 DEA9SA197FO
DA 15 DAA15SA197FO
DB 25 DBA25SA197FO
DC 37 DCA37SA197FO
Note: For crimp (size 20) contacts and tooling, see pages 83 & 275.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Receptacle
10°
E
C
B
A
D
Ø 3,05 (.120)
POSITION 1
10,93 (.430)
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
LF
W
K
Dimensions are shown in mm (inch)
Dimensions subject to change
38
D Subminiature D*W
Discrete Wire IDC
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Through Hole
& Shield Can Kit Clinch Nut #4-40 UNC
& Shield Can Kit
DE 9 DEW9P* DEWE9P* DEW9P*G DEWE9P*G
DA 15 DAW15P* DAWE15P* DAW15P*G DAWE15P*G
DB 25 DBW25P* DBWE25P* DBW25P*G DBWE25P*G
DC 37 DCW37P* DCWE37P* DCW37P*G DCWE37P*G
Note: *Insert contact type. Example: DEW9P1.
For contacts with 0,76 Ȗm gold add -A176. Example: DEW9P1-A176.
For shield can kit, see page 40.
Contact Types* Wire Accommodation
1 28 AWG/30 AWG
2 22 AWG/26 AWG
3 20 AWG/22 AWG
For more information, see pages 40-41.
Dimensions
Shell Size Layout A
±0,38 (.015) B
±0,12 (.005) C
±0,12 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) G
max. H
±0,25 (.010) J
±0,25 (.010) L
±0,25 (.010)
DEW 9 30,81 (1.213) 16,91 (.666) 24,99 (.984) 8,35 (.329) 12,55 (.494) 10,71 (.422) 6,05 (.238) 19,27 (.759) 10,71 (.422) 0,76 (.030)
DAW 15 39,14 (1.541) 25,54 (.994) 33,32 (1.312) 8,35 (.329) 12,55 (.494) 10,71 (.422) 6,05 (.238) 27,50 (1.083) 10,71 (.422) 0,76 (.030)
DBW 25 53,03 (2.048) 38,96 (1.534) 47,04 (1.852) 8,35 (.329) 12,55 (.494) 10,82 (.426) 5,99 (.236) 41,27 (1.625) 10,71 (.422) 0,99 (.039)
DCW 37 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,35 (.329) 12,55 (.494) 10,82 (.426) 5,99 (.236) 57,70 (2.272) 10,71 (.422) 0,99 (.039)
Plug
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
H
J
Rear Face
E
A
C
B
D
Ø 3,05 (.120)
10°
113
2514
F
1,33
(.052) G MAX
7,00
(.276)
14,50
(.571) L
Dimensions are shown in mm (inch)
Dimensions subject to change 39
D Subminiature D*W
Discrete Wire IDC
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Through Hole
& Shield Can Kit Clinch Nut #4-40 UNC
& Shield Can Kit
DE 9 DEW9S* DEWE9S* DEW9S*G DEWE9S*G
DA 15 DAW15S* DAWE15S* DAW15S*G DAWE15S*G
DB 25 DBW25S* DBWE25S* DBW25S*G DBWE25S*G
DC 37 DCW37S* DCWE37S* DCW37S*G DCWE37S*G
Note: *Insert contact type. Example: DEW9S1.
For contacts with 0,76 Ȗm gold add -A176. Example: DEW9S1-A176.
For shield can kit, see page 40.
Contact Types* Wire Accommodation
1 28 AWG/30 AWG
2 22 AWG/26 AWG
3 20 AWG/22 AWG
For more information, see pages 40-41.
Dimensions
Shell Size Layout A
±0,38 (.015) B
±0,12 (.005) C
±0,12 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) G
max. H
±0,25 (.010) J
±0,25 (.010) L
±0,25 (.010)
DEW 9 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 19,27 (.759) 10,71 (.422) 0,76 (.030)
DAW 15 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 27,50 (1.083) 10,71 (.422) 0,76 (.030)
DBW 25 53,03 (2.048) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 41,27 (1.625) 10,71 (.422) 0,76 (.030)
DCW 37 69,32 (2.729) 55,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,89 (.429) 6,30 (.248) 57,70 (2.272) 10,71 (.422) 0,76 (.030)
Receptacle
Engaging Face
Selection Guide
ɀFor Product Features, Specifications,
Materials and Finishes, see pages 30-31.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
H
J
Rear Face
E
AC
B
D
Ø 3,05 (.120)
10°
1
13
25 14
F
1,20
(.047) G MAX
7,00
(.276)
14,50
(.571) L
Dimensions are shown in mm (inch)
Dimensions subject to change
40
D Subminiature D*W
Shield Can Kit
Ferrule
D*W XCable Ferrule
XAFerrule
Part Number Crimp Tool
Part Number Crimp Tool
Position
DEW9G 4,8-5,5 6,25 (.246) 304-8810-000 D115433-1 B
5,5-6,2 6,25 (.246) 304-8810-000 D115433-1 A
6,2-7,2 8,20 (.323) 304-8811-000 D115433-2 B
7,2-8,2 8,20 (.323) 304-8811-000 D115433-2 A
8,2-9,5 11,50 (.452) 304-8812-000 D115433-3 B
9,5-11,1 11,50 (.452) 304-8813-000 D115433-3 A
DBW25G 4,8-5,5 6,25 (.246) 304-8810-000 D115433-1 B
5,5-6,2 6,25 (.246) 304-8810-000 D115433-1 A
6,2-7,2 8,20 (.323) 304-8811-000 D115433-2 B
7,2-8,2 8,20 (.323) 304-8811-000 D115433-2 A
8,2-9,5 11,50 (.452) 304-8812-000 D115433-3 B
9,5-11,1 11,50 (.452) 304-8813-000 D115433-3 A
Ferrule Wire Trim Dimensions Crimp Tool Positions
FERRULE
CABLE
60°
38,80(1.528)
32,60(1.283)
16,70
(.657)
39,80
(1.567)
FERRULE, MUST
BE PURCHASED
SEPARATELY.
Materials and Finishes
Shield Can and Ferrule
Material: Steel
Finish: Tin
11,25(.443)
Ø A
Ø 11,10(.437)
10,00(.394)
50,00 (1.969)
FERRULE
CABLE
35,00
(1.378)
WIRES
BRAID
Ø10,00
(.394)
10,10
(.398)
Dimensions are shown in mm (inch)
Dimensions subject to change 41
D Subminiature D*W
Discrete Wire IDC Contacts
Contacts
Contact Types 1 2 3
Pin 330-8753-101 330-8753-102 330-8753-103
Socket 330-8754-101 330-8754-102 330-8754-103
Solid Cable
Wire Size 28 AWG 30 AWG 22 AWG 24 AWG 26 AWG 20 AWG 22 AWG
Section mm
2
0.08 0.05 0.34 0.22 0.12 0.60 0.34
Internal dia. mm max 0.32 0.26 0.62 0.51 0.40 0.88 0.62
External dia. mm max 1.30 1.20 1.45 1.45 1.40 1.45 1.45
Stranded Cable
Wire Size 28 AWG 30 AWG 22 AWG 24 AWG 26 AWG 20 AWG 22 AWG
Section mm
2
0.09 0.05 0.34 0.22 0.12 0.60 0.34
Composition 7 x 0.13 7 x 0.10 7 x 0.25 7 x 0.20 7 x 0.15 19 x 0.20 7 x 0.25
Internal cable dia. mm max 0.40 0.30 0.75 0.60 0.45 0.97 0.75
External wire dia. mm max 1.30 1.20 1.45 1.45 1.40 1.45 1.45
Insulation Displacement Connection Concept
Tooling
Extraction Tool Hand Crimp Tool Row by Row Pneumatic Press
Part Number
DW115394 Part Number
Standard Tool: DW115394-1
Automatic Tool: DW115394-2
Tool Support: DW115394-20
Part Number
DW115394-501
Dimensions are shown in mm (inch)
Dimensions subject to change
42
D Subminiature Combo D
Selection Index Page
Combo D
An Introduction........................................................43
Combo DPCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option)
Coaxial 90°— Standard Footprint .318ɍor .283ɍɍ inch (Sizes DE-DC)...........44
Coaxial 90°— Standard Footprint .489ɍor .454ɍɍ inch (Size DD) ..............46
13C3 Special — Receptacle Only.........................................48
3C3 Shielded Special — Receptacle Only...................................49
Coaxial 90°— European Footprint 10,2ɍor 9,4ɍɍ mm (Sizes DE-DC)............50
Coaxial Straight — Standard PC Tails (Sizes DE-DC) ..........................52
Coaxial Straight — Standard PC Tails (Size DD) ..............................54
Coaxial Straight — European PC Tails (Sizes DE-DC)..........................56
Coaxial Straight — European PC Tails (Size DD)..............................58
Combo DPCB Connectors with High Power Contacts
40 A High Power 90°— Standard Footprint .489ɍor .454ɍɍ inch (Sizes DE-DC) ...60
40 A High Power 90°— Standard Footprint .489ɍor .454ɍɍ inch (Size DD).......62
40 A High Power 90°— European Footprint 10,2ɍor 9,4ɍɍ mm (Sizes DE-DC) ....64
40 A High Power Straight — Standard PC Tails (Sizes DE-DC)...................66
40 A High Power Straight — Standard PC Tails (Size DD).......................68
40 A High Power Straight — European PC Tails (Sizes DE-DC)...................70
40 A High Power Straight — European PC Tails (Size DD) ......................72
Combo DPCB Connectors with (Size 20) Signal Contacts Only
90°— European Footprint 10,2ɍor 9,4ɍɍ mm (Sizes DE-DD)..................74
Straight PC Tails — European (Sizes DE-DD)................................76
Solder Cup (Sizes DE-DD) ..............................................78
Combo DPCB Crimp Connectors without Contacts (Sizes DA-DD) ................80
Loose Contacts and Tooling
Shield Cans and Crimp Tooling...........................................82
Crimp (Size 20) Contacts and Tooling .....................................83
Cable (Size 8) Loose Contacts
Coaxial 75 Ohm and Tooling — Straight Stamped Crimp/Crimp.................84
Coaxial 75 Ohm and Tooling — 90°Crimp Braid/Solder Center Contact ..........85
Coaxial 50 Ohm — Straight Crimp or Solder Braid ..........................86
Coaxial 50 Ohm — 90°Crimp or Solder Braid .............................87
Insertion/Extraction Instructions for Coaxial,
High Power and High Voltage Contacts and Tooling .......................88
Coaxial Assembly Instructions and Crimp Tooling...........................89
High Power and Tooling — Straight Solder or Crimp.........................90
High Voltage — Straight / 90°..........................................91
PCB (Size 8) Loose Contacts
Coaxial 75 Ohm — Straight / 90°.......................................92
High Power — Straight / 90°..........................................93
High Voltage — Straight..............................................94
PCB Guide Pin and Socket ..............................................95
ɍConnector footprint measured from front shell.
ɍɍ Connector footprint measured from rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change 43
D Subminiature Combo D
Combination D Subminiature connectors
offer the advantages of an industry
standard shield I/O interconnect, with the
flexibility of a customized special, designed for any
application.
This connector system is ideal for applications that
require optimization of space while improving
overall shielding. Combo Daccomplishes this by
combining multiple interconnect types into one
fully shielded product, decreasing the number I/O
interfaces and reducing the possibility of EMI/RFI
leakage.
By continually investing in engineering and
manufacturing technology, ITT Cannon has
improved the performance and features of this
popular product. This catalog contains our latest
efforts to meet the global requirements of the
commercial electronics industry with a flexible,
reliable and cost effective connector solution.
Applications
ɀVideo Coaxial Transmission (75 ȉ)
ɀRF and Telecom Transmission (50 ȉ)
ɀPower Interconnects (Up to 40 A)
Product Features
ɀStandard and European Footprints
ɀPre-Installed 75 ȉ/50 ȉCoaxial or High
Power contacts (One Part Number)
ɀVertical Standoffs or 90°Brackets
ɀ90°or Straight PCB
ɀPC Boards up to 3,2 (.125) Thick
ɀPCB Variants Available with Boardlocks and/or
Screw Locks (#4-40 or M3)
Materials and Finishes
Connector Assembly
Description Material Finish/Treatment
Shell Steel Tin
Insulator Black Polyester, UL 94V-0 None
Pin Contact Copper Alloy Gold over Nickel
Socket Contact Copper Alloy Gold over Nickel in mating area, Tin on balance
Standoff Stainless Steel Passivated
Bracket Steel Tin
Rivnut Steel Tin
Boardlock Copper Alloy Tin
Coaxial/High Power/High Voltage Contact Assemblies
Contacts and outer shells Copper Alloy Gold over Nickel (Tin on coax ground PC tails)
Ring, Retaining Copper Alloy Nickel
Insulator (Coaxial only) Teflon None
Insulator (High Voltage only) Thermoplastic None
U.L. File Number: E8572
SpecificationsTemperature Rating 55°C to 125°C
Signal Contact Current Rating 7.5 A current capacity
Signal Contact Resistance 55 millivolt max. at 7.5 test current
Signal Contact
Dielectric Withstanding Voltage 1250 VAC at Sea Level
Coaxial Current Rating 5 A
Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level
Coaxial Impedance 75 ȉor 50 ȉ
Coaxial VSWR Less than 1.30 +.03F for F up to 500 MHz
Coaxial Insertion Loss .3dB loss at 500 MHz
High Power Current Rating Up to 40 A
High Power
Dielectric Withstanding Voltage 1000 VAC at Sea Level
High Voltage Current Rating 5 A
High Voltage Contact
Dielectric Withstanding Voltage 2800 V at Sea Level
Dimensions are shown in mm (inch)
Dimensions subject to change
44
D Subminiature Combo D
Coaxial 90°— Standard Footprint .318ɍor .283 inchɍɍ (Sizes DE-DC)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5C1PJK87 DEMC5C1PJK87 DEMD5C1PJK87 DEMG5C1PJK87
DA 7W2 DAMP7C2PJK87 DAMC7C2PJK87 DAMD7C2PJK87 DAMG7C2PJK87
DA 11W1 DAMP11C1PJK87 DAMC11C1PJK87 DAMD11C1PJK87 DAMG11C1PJK87
DA 3W3 DAMP3C3PJK87 DAMC3C3PJK87 DAMD3C3PJK87 DAMG3C3PJK87
DA 3WK3DAMP3CK3PJK87TM DAMC3CK3PJK87TM DAMD3CK3PJK87TM DAMG3CK3PJK87TM
DB 5W5 DBMP5C5PJK87 DBMC5C5PJK87 DBMD5C5PJK87 DBMG5C5PJK87
DB 9W4 DBMP9C4PJK87 DBMC9C4PJK87 DBMD9C4PJK87 DBMG9C4PJK87
DB 13W3 DBMP13C3PJK87 DBMC13C3PJK87 DBMD13C3PJK87 DBMG13C3PJK87
DB 17W2 DBMP17C2PJK87 DBMC17C2PJK87 DBMD17C2PJK87 DBMG17C2PJK87
DB 21W1 DBMP21C1PJK87 DBMC21C1PJK87 DBMD21C1PJK87 DBMG21C1PJK87
DC 8W8 DCMP8C8PJK87 DCMC8C8PJK87 DCMD8C8PJK87 DCMG8C8PJK87
DC 13W6 DCMP13C6PJK87 DCMC13C6PJK87 DCMD13C6PJK87 DCMG13C6PJK87
DC 17W5 DCMP17C5PJK87 DCMC17C5PJK87 DCMD17C5PJK87 DCMG17C5PJK87
DC 21WA4 DCMP21CA4PJK87 DCMC21CA4PJK87 DCMD21CA4PJK87 DCMG21CA4PJK87
DC 25W3 DCMP25C3PJK87 DCMC25C3PJK87 DCMD25C3PJK87 DCMG25C3PJK87
DC 27W2 DCMP27C2PJK87 DCMC27C2PJK87 DCMD27C2PJK87 DCMG27C2PJK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PJK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5C1PJK127
For DD shell sizes, see page 46.
Keyed.
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
0,82
(.032)
2,92
(.115)
Ø 0,76
(.030)
A
BC
E
10°
BOARDLOCK
D
12,34
(.486) 8,64
(.340)
6,50 ± 0,25
(.256 ± .010)
BRACKET,
METAL
RIVNUT
#4-40 UNC
SCREW LOCK
#4-40 UNC
3,89 (.153)
MIN
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
11,94 ± 0,33
(.470 ± .013)
L
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
F
W
2,84
(.112)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 228-229.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 45
D Subminiature Combo D
Coaxial 90°— Standard Footprint .318ɍor .283 inchɍɍ (Sizes DE-DC)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5C1SJA197 DEMC5C1SJA197 DEMD5C1SJA197 DEMG5C1SJA197
DA 7W2 DAMP7C2SJA197 DAMC7C2SJA197 DAMD7C2SJA197 DAMG7C2SJA197
DA 11W1 DAMP11C1SJA197 DAMC11C1SJA197 DAMD11C1SJA197 DAMG11C1SJA197
DA 3W3 DAMP3C3SJA197 DAMC3C3SJA197 DAMD3C3SJA197 DAMG3C3SJA197
DA 3WK3DAMP3CK3SJA197TM DAMC3CK3SJA197TM DAMD3CK3SJA197TM DAMG3CK3SJA197TM
DB 5W5 DBMP5C5SJA197 DBMC5C5SJA197 DBMD5C5SJA197 DBMG5C5SJA197
DB 9W4 DBMP9C4SJA197 DBMC9C4SJA197 DBMD9C4SJA197 DBMG9C4SJA197
DB 13W3 DBMP13C3SJA197 DBMC13C3SJA197 DBMD13C3SJA197 DBMG13C3SJA197
DB 17W2 DBMP17C2SJA197 DBMC17C2SJA197 DBMD17C2SJA197 DBMG17C2SJA197
DB 21W1 DBMP21C1SJA197 DBMC21C1SJA197 DBMD21C1SJA197 DBMG21C1SJA197
DC 8W8 DCMP8C8SJA197 DCMC8C8SJA197 DCMD8C8SJA197 DCMG8C8SJA197
DC 13W6 DCMP13C6SJA197 DCMC13C6SJA197 DCMD13C6SJA197 DCMG13C6SJA197
DC 17W5 DCMP17C5SJA197 DCMC17C5SJA197 DCMD17C5SJA197 DCMG17C5SJA197
DC 21WA4 DCMP21CA4SJA197 DCMC21CA4SJA197 DCMD21CA4SJA197 DCMG21CA4SJA197
DC 25W3 DCMP25C3SJA197 DCMC25C3SJA197 DCMD25C3SJA197 DCMG25C3SJA197
DC 27W2 DCMP27C2SJA197 DCMC27C2SJA197 DCMD27C2SJA197 DCMG27C2SJA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SJA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DEMP5C1SJK126
For DD Shell Sizes, see page 47.
Keyed.
10°0,79
(.031)
2,92
(.115)
Ø 0,76
(.030)
A
B
C
ED
BOARDLOCK
12,34
(.486) 8,64
(.340)
BRACKET,
METAL
RIVNUT
#4-40 UNC
SCREW LOCK
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
3,89 (.153)
MIN
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
11,94 ± 0,33
(.470 ± .013)
L
2,84
(.112)
F
W
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47.04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Screw lock, boardlock and signal contacts
removed for clarity
Screw lock, boardlock and coaxial contact
removed for clarity
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 231-232.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, See Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
46
D Subminiature Combo D
Coaxial 90°— Standard Footprint .489ɍor .454 inchɍɍ (Size DD)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMP24C7PJK87 DDMC24C7PJK87 DDMD24C7PJK87 DDMG24C7PJK87
DD 36W4 DDMP36C4PJK87 DDMC36C4PJK87 DDMD36C4PJK87 DDMG36C4PJK87
DD 43W2 DDMP43C2PJK87 DDMC43C2PJK87 DDMD43C2PJK87 DDMG43C2PJK87
DD 47W1 DDMP47C1PJK87 DDMC47C1PJK87 DDMD47C1PJK87 DDMG47C1PJK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4PJK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24C7PJK127
AC
B
D
E
Ø 0,76
(.030)
0,82
(.032)
2,92
(.115)
BOARDLOCK
10°
6,50 ± 0,25
(.256 ± .010)
13,74
(.541)
10,06
(.396)
BRACKET,
METAL
SCREW LOCK
#4-40 UNC
3,89 (.153)
MIN
11,94 ± 0,33
(.470 ± .013)
L
2,54
(.100)
Ø 0,51
(.020)
0,56
(.023)
11,53 ± 0,25
(.454 ± .010)
5,68
(.224)
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
RIVNUT
#4-40 UNC
F
W
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contacts
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 230.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, See Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 47
A
C
B
Ø 0,76
(.030)
0,82
(.032)
10°
E
2,92
(.115)
D
BOARDLOCK
D Subminiature Combo D
Coaxial 90°— Standard Footprint .489ɍor .454 inchɍɍ (Size DD)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMP24C7SJA197 DDMC24C7SJA197 DDMD24C7SJA197 DDMG24C7SJA197
DD 36W4 DDMP36C4SJA197 DDMC36C4SJA197 DDMD36C4SJA197 DDMG36C4SJA197
DD 43W2 DDMP43C2SJA197 DDMC43C2SJA197 DDMD43C2SJA197 DDMG43C2SJA197
DD 47W1 DDMP47C1SJA197 DDMC47C1SJA197 DDMD47C1SJA197 DDMG47C1SJA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMG36X4SJA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24C7SJK126
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
6,50 ± 0,25
(.256 ± .010)
13,74
(.541)
10,06
(.396)
BRACKET,
METAL
SCREW LOCK
#4-40 UNC
L
3,89 (.153)
MIN
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100) 11,94 ± 0,33
(.470 ± .013)
WF
5,68
(.224)
11,53 ± 0,25
(.454 ± .010)
4,33 ± 0,38
(.170 ± .015)
2,84 (.112)
RIVNUT
#4-40 UNC
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 233.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, See Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
48
53,15 ± 0,35
(2.095 ± .014)
47,04
(1.852)
38,38
(1.510)
12,91(.508)
MAX 7,87(.310)
2,80 ± 0,25
(.110 ± .010) 10°BOARDLOCK
A3A2
A1 1
6
6,13 ± 0,13
(.241 ± .005)
2,90 ± 0,21
(.114 ± .008) 10,17 (.400)
(SIGNAL AND COAX)
12,71 (.500)
(SIGNAL AND COAX)
15,25 (.600)
(COAX ONLY)
6,27 ± 0,25
(.247 ± .010)
D-Subminiature Combo D
13C3 Special — Receptacle only
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 236 (Rear
shell REF. is 0,76 (.030) from front shell).
ɀFor panel cutouts, see page 221.
Part Number DB111949-43
Finishes
Signal and Coaxial
Center Contact Finish: 30 Ȗinches Gold.
Note: For additional materials and finishes, see introduction
page 43.
Engaging Face
Dimensions are shown in mm (inch)
Dimensions subject to change 49
D Subminiature Combo D
3C3 Shielded Special — Receptacle only
Receptacle
Engaging Face
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,25 (.010)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,17 (.243)
AC
B
ED
10°
9,37
(.369)
12,12
(.477)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 231.
ɀFor panel cutouts, see page 221.
Note: Connector supplied with boardlocks.
Materials and Finishes
Body Material: Zinc
Body Finish: Tin
Coaxial Center
Contact Finish: 30 Ȗinches Gold
Note: For additional materials and finishes, see introduction
page 43.
Part Number DAM53512-1405
4,19 - 2,79
(.165 - .110)
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
12,62
(.497)
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change
50
D Subminiature Combo D
Coaxial 90°— European Footprint 10,2ɍor 9,4 mmɍɍ (Sizes DE-DC)
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 234-235.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
AC
B
D
0,82
(.032)
2,92
(.115)
Ø 0,60
(.024)
10°
E
BOARDLOCK
1,00 (.039)
SCREW LOCK
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
14,55
(.573) 10,85
(.427) RIVNUT
#4-40 UNC
BRACKET,
METAL
2,54
(.100)
Ø 0,51
(.020)
0,56
(.023) 2,89 (.113) MIN
11,94 ± 0,33
(.470 ± .013)
L
4,00 (.157)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
W
F
Engaging Face
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5C1PVK87 DEMC5C1PVK87 DEMD5C1PVK87 DEMG5C1PVK87
DA 7W2 DAMP7C2PVK87 DAMC7C2PVK87 DAMD7C2PVK87 DAMG7C2PVK87
DA 11W1 DAMP11C1PVK87 DAMC11C1PVK87 DAMD11C1PVK87 DAMG11C1PVK87
DA 3W3 DAMP3C3PVK87 DAMC3C3PVK87 DAMD3C3PVK87 DAMG3C3PVK87
DA 3WK3DAMP3CK3PVK87TM DAMC3CK3PVK87TM DAMD3CK3PVK87TM DAMG3CK3PVK87TM
DB 5W5 DBMP5C5PVK87 DBMC5C5PVK87 DBMD5C5PVK87 DBMG5C5PVK87
DB 9W4 DBMP9C4PVK87 DBMC9C4PVK87 DBMD9C4PVK87 DBMG9C4PVK87
DB 13W3 DBMP13C3PVK87 DBMC13C3PVK87 DBMD13C3PVK87 DBMG13C3PVK87
DB 17W2 DBMP17C2PVK87 DBMC17C2PVK87 DBMD17C2PVK87 DBMG17C2PVK87
DB 21W1 DBMP21C1PVK87 DBMC21C1PVK87 DBMD21C1PVK87 DBMG21C1PVK87
DC 8W8 DCMP8C8PVK87 DCMC8C8PVK87 DCMD8C8PVK87 DCMG8C8PVK87
DC 13W6 DCMP13C6PVK87 DCMC13C6PVK87 DCMD13C6PVK87 DCMG13C6PVK87
DC 17W5 DCMP17C5PVK87 DCMC17C5PVK87 DCMD17C5PVK87 DCMG17C5PVK87
DC 21WA4 DCMP21CA4PVK87 DCMC21CA4PVK87 DCMD21CA4PVK87 DCMG21CA4PVK87
DC 25W3 DCMP25C3PVK87 DCMC25C3PVK87 DCMD25C3PVK87 DCMG25C3PVK87
DC 27W2 DCMP27C2PVK87 DCMC27C2PVK87 DCMD27C2PVK87 DCMG27C2PVK87
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1PVK87
For tin plated PC tails add A226 (signal contacts only). Example: DEMP5C1PVK87A226
For performance class 2 substitute K127 for K87. Example: DEMP5C1PVK127
For DD shell sizes (Standard footprint) see page 46.
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change 51
D Subminiature Combo D
Coaxial 90°— European Footprint 10,2ɍor 9,4 mmɍɍ (Sizes DE-DC)
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
E
AC
B
10°Ø 0,60
(.024) 0,82
(.032)
2,92
(.115)
D
BOARDLOCK
1,00 (.039)
6,50 ± 0,25
(.256 ± .010)
10,85
(.427)
14,55
(.573)
BRACKET,
METAL
RIVNUT
#4-40 UNC
SCREW LOCK
Ø 0,51
(.020) 2,89 (.113) MIN
2.54
(.100)
0,56
(.023)
11,94 ± 0,33
(.470 ± .013)
L
4,00 (.157)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
W
F
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 236-237.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5C1SVA197 DEMC5C1SVA197 DEMD5C1SVA197 DEMG5C1SVA197
DA 7W2 DAMP7C2SVA197 DAMC7C2SVA197 DAMD7C2SVA197 DAMG7C2SVA197
DA 11W1 DAMP11C1SVA197 DAMC11C1SVA197 DAMD11C1SVA197 DAMG11C1SVA197
DA 3W3 DAMP3C3SVA197 DAMC3C3SVA197 DAMD3C3SVA197 DAMG3C3SVA197
DA 3WK3DAMP3CK3SVA197TM DAMC3CK3SVA197TM DAMD3CK3SVA197TM DAMG3CK3SVA197TM
DB 5W5 DBMP5C5SVA197 DBMC5C5SVA197 DBMD5C5SVA197 DBMG5C5SVA197
DB 9W4 DBMP9C4SVA197 DBMC9C4SVA197 DBMD9C4SVA197 DBMG9C4SVA197
DB 13W3 DBMP13C3SVA197 DBMC13C3SVA197 DBMD13C3SVA197 DBMG13C3SVA197
DB 17W2 DBMP17C2SVA197 DBMC17C2SVA197 DBMD17C2SVA197 DBMG17C2SVA197
DB 21W1 DBMP21C1SVA197 DBMC21C1SVA197 DBMD21C1SVA197 DBMG21C1SVA197
DC 8W8 DCMP8C8SVA197 DCMC8C8SVA197 DCMD8C8SVA197 DCMG8C8SVA197
DC 13W6 DCMP13C6SVA197 DCMC13C6SVA197 DCMD13C6SVA197 DCMG13C6SVA197
DC 17W5 DCMP17C5SVA197 DCMC17C5SVA197 DCMD17C5SVA197 DCMG17C5SVA197
DC 21WA4 DCMP21CA4SVA197 DCMC21CA4SVA197 DCMD21CA4SVA197 DCMG21CA4SVA197
DC 25W3 DCMP25C3SVA197 DCMC25C3SVA197 DCMD25C3SVA197 DCMG25C3SVA197
DC 27W2 DCMP27C2SVA197 DCMC27C2SVA197 DCMD27C2SVA197 DCMG27C2SVA197
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMP5X1SVA197
For performance class 2 substitute K126 for A197. Example: DEMP5C1SVK126
For DD shell sizes (standard footprint) see page 47.
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change
52
D Subminiature Combo D
Coaxial Straight — Standard PC Tails (Sizes DE-DC)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5C1PNK87 DEMZ5C1PNK87 DEMN5C1PNK87
DA 7W2 DAMV7C2PNK87 DAMZ7C2PNK87 DAMN7C2PNK87
DA 11W1 DAMV11C1PNK87 DAMZ11C1PNK87 DAMN11C1PNK87
DA 3W3 DAMV3C3PNK87 DAMZ3C3PNK87 DAMN3C3PNK87
DA 3WK3DAMV3CK3PNK87TM DAMZ3CK3PNK87TM DAMN3CK3PNK87TM
DB 5W5 DBMV5C5PNK87 DBMZ5C5PNK87 DBMN5C5PNK87
DB 9W4 DBMV9C4PNK87 DBMZ9C4PNK87 DBMN9C4PNK87
DB 13W3 DBMV13C3PNK87 DBMZ13C3PNK87 DBMN13C3PNK87
DB 17W2 DBMV17C2PNK87 DBMZ17C2PNK87 DBMN17C2PNK87
DB 21W1 DBMV21C1PNK87 DBMZ21C1PNK87 DBMN21C1PNK87
DC 8W8 DCMV8C8PNK87 DCMZ8C8PNK87 DCMN8C8PNK87
DC 13W6 DCMV13C6PNK87 DCMZ13C6PNK87 DCMN13C6PNK87
DC 17W5 DCMV17C5PNK87 DCMZ17C5PNK87 DCMN17C5PNK87
DC 21WA4 DCMV21CA4PNK87 DCMZ21CA4PNK87 DCMN21CA4PNK87
DC 25W3 DCMV25C3PNK87 DCMZ25C3PNK87 DCMN25C3PNK87
DC 27W2 DCMV27C2PNK87 DCMZ27C2PNK87 DCMN27C2PNK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PNK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DEMN5C1PNK127
For DD shell sizes, see page 54.
Keyed.
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
A
C
B
ED
10°
6,50 ± 0,25
(.256 ± .010)
Ø 0,76
(.030)
0,82
(.032)
3,45 (.136)
7,62 ± 0,25
(.300 ± .010)
SCREW LOCK
#4-40 UNC
2,92
(.115)
4,52 (.178)
STANDOFF
#4-40 UNC
BOARDLOCK
Ø 0,51
(.020)
0,62
(.024)
2,54
(.100)
L
F
W
2,84
(.112)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 238-239.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Dimensions are shown in mm (inch)
Dimensions subject to change 53
D Subminiature Combo D
Coaxial Straight — Standard PC Tails (Sizes DE-DC)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5C1SNA197 DEMZ5C1SNA197 DEMN5C1SNA197
DA 7W2 DAMV7C2SNA197 DAMZ7C2SNA197 DAMN7C2SNA197
DA 11W1 DAMV11C1SNA197 DAMZ11C1SNA197 DAMN11C1SNA197
DA 3W3 DAMV3C3SNA197 DAMZ3C3SNA197 DAMN3C3SNA197
DA 3WK3DAMV3CK3SNA197TM DAMZ3CK3SNA197TM DAMN3CK3SNA197TM
DB 5W5 DBMV5C5SNA197 DBMZ5C5SNA197 DBMN5C5SNA197
DB 9W4 DBMV9C4SNA197 DBMZ9C4SNA197 DBMN9C4SNA197
DB 13W3 DBMV13C3SNA197 DBMZ13C3SNA197 DBMN13C3SNA197
DB 17W2 DBMV17C2SNA197 DBMZ17C2SNA197 DBMN17C2SNA197
DB 21W1 DBMV21C1SNA197 DBMZ21C1SNA197 DBMN21C1SNA197
DC 8W8 DCMV8C8SNA197 DCMZ8C8SNA197 DCMN8C8SNA197
DC 13W6 DCMV13C6SNA197 DCMZ13C6SNA197 DCMN13C6SNA197
DC 17W5 DCMV17C5SNA197 DCMZ17C5SNA197 DCMN17C5SNA197
DC 21WA4 DCMV21CA4SNA197 DCMZ21CA4SNA197 DCMN21CA4SNA197
DC 25W3 DCMV25C3SNA197 DCMZ25C3SNA197 DCMN25C3SNA197
DC 27W2 DCMV27C2SNA197 DCMZ27C2SNA197 DCMN27C2SNA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SNA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DEMN5C1SNK126
For DD shell sizes, see page 55.
Keyed.
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
A
C
B
ED
10°
Ø 0,76
(.030)
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
3,45 (.136)
2,92
(.115)
BOARDLOCK 0,82
(.032)
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
Ø 0,51
(.020)
0,62
(.024)
2,54
(1.00)
L
F
W
2,84
(.112)
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 241-242.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions are shown in mm (inch)
Dimensions subject to change
54
D Subminiature Combo D
Coaxial Straight — Standard PC Tails (Size DD)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24C7PNK87 DDMZ24C7PNK87 DDMN24C7PNK87
DD 36W4 DDMV36C4PNK87 DDMZ36C4PNK87 DDMN36C4PNK87
DD 43W2 DDMV43C2PNK87 DDMZ43C2PNK87 DDMN43C2PNK87
DD 47W1 DDMV47C1PNK87 DDMZ47C1PNK87 DDMN47C1PNK87
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PNK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DDMN24C7PNK127
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
A
C
B
10°
ED
Ø 0,76
(.030)
0,82
(.032)
3,45
(.136)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
0,62
(.024)
Ø 0,51
(.020)
2,54
(.100)
L
WF
5,69
(.224)
2,84
(.112)
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 240.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions are shown in mm (inch)
Dimensions subject to change 55
A
C
B
10°
ED
D Subminiature Combo D
Coaxial Straight — Standard PC Tails (Size DD)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24C7SNA197 DDMZ24C7SNA197 DDMN24C7SNA197
DD 36W4 DDMV36C4SNA197 DDMZ36C4SNA197 DDMN36C4SNA197
DD 43W2 DDMV43C2SNA197 DDMZ43C2SNA197 DDMN43C2SNA197
DD 47W1 DDMV47C1SNA197 DDMZ47C1SNA197 DDMN47C1SNA197
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SNA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DDMN24C7SNK126
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
7,62 ± 0,25
(.300 ± .010)
Ø 0,76
(.030)
0,82
(.032)
3,45
(.136)
6,50 ± 0,25
(.256 ± .010)
2,92
(.115)
BOARDLOCK
0,62
(.024)
Ø 0,51
(.020)
2,54
(.100)
L
F
5,69
(.224)
2,84
(.112)
W
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 243.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions are shown in mm (inch)
Dimensions subject to change
56
D Subminiature Combo D
Coaxial Straight — European PC Tails (Sizes DE-DC)
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
A
C
B
E
10°
D
Ø 0,51
(.020)
2,54
(.100) 0,62
(.024)
L
2,84
(.112)
W
F
3,45
(.136)
Ø 0,60
(.024)
0,82
(.032)
2,91
(.115)
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 238-239.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5C1PYK87 DEMZ5C1PYK87 DEMN5C1PYK87
DA 7W2 DAMV7C2PYK87 DAMZ7C2PYK87 DAMN7C2PYK87
DA 11W1 DAMV11C1PYK87 DAMZ11C1PYK87 DAMN11C1PYK87
DA 3W3 DAMV3C3PYK87 DAMZ3C3PYK87 DAMN3C3PYK87
DA 3WK3DAMV3CK3PYK87TM DAMZ3CK3PYK87TM DAMN3CK3PYK87TM
DB 5W5 DBMV5C5PYK87 DBMZ5C5PYK87 DBMN5C5PYK87
DB 9W4 DBMV9C4PYK87 DBMZ9C4PYK87 DBMN9C4PYK87
DB 13W3 DBMV13C3PYK87 DBMZ13C3PYK87 DBMN13C3PYK87
DB 17W2 DBMV17C2PYK87 DBMZ17C2PYK87 DBMN17C2PYK87
DB 21W1 DBMV21C1PYK87 DBMZ21C1PYK87 DBMN21C1PYK87
DC 8W8 DCMV8C8PYK87 DCMZ8C8PYK87 DCMN8C8PYK87
DC 13W6 DCMV13C6PYK87 DCMZ13C6PYK87 DCMN13C6PYK87
DC 17W5 DCMV17C5PYK87 DCMZ17C5PYK87 DCMN17C5PYK87
DC 21WA4 DCMV21CA4PYK87 DCMZ21CA4PYK87 DCMN21CA4PYK87
DC 25W3 DCMV25C3PYK87 DCMZ25C3PYK87 DCMN25C3PYK87
DC 27W2 DCMV27C2PYK87 DCMZ27C2PYK87 DCMN27C2PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1PYK87
For tin plated PC tails add A226 (signal contacts only). Example: DEMV5C1PYK87A226
For performance class 2 substitute K127 for K87. Example: DEMV5C1PYK127
For DD shell sizes, see page 58.
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change 57
AC
B
E
10°
D
3,45
(.136) Ø 0,60
(.024)
0,82
(.032)
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
Ø 0,51
(.020)
2,54
(.100) 0,62
(.024)
L
2,84
(.112)
F
W
D Subminiature Combo D
Coaxial Straight — European PC Tails (Sizes DE-DC)
Dimensions
Shell Size A
±0.38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 241-242.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5C1SYA197 DEMZ5C1SYA197 DEMN5C1SYA197
DA 7W2 DAMV7C2SYA197 DAMZ7C2SYA197 DAMN7C2SYA197
DA 11W1 DAMV11C1SYA197 DAMZ11C1SYA197 DAMN11C1SYA197
DA 3W3 DAMV3C3SYA197 DAMZ3C3SYA197 DAMN3C3SYA197
DA 3WK3DAMV3CK3SYA197TM DAMZ3CK3SYA197TM DAMN3CK3SYA197TM
DB 5W5 DBMV5C5SYA197 DBMZ5C5SYA197 DBMN5C5SYA197
DB 9W4 DBMV9C4SYA197 DBMZ9C4SYA197 DBMN9C4SYA197
DB 13W3 DBMV13C3SYA197 DBMZ13C3SYA197 DBMN13C3SYA197
DB 17W2 DBMV17C2SYA197 DBMZ17C2SYA197 DBMN17C2SYA197
DB 21W1 DBMV21C1SYA197 DBMZ21C1SYA197 DBMN21C1SYA197
DC 8W8 DCMV8C8SYA197 DCMZ8C8SYA197 DCMN8C8SYA197
DC 13W6 DCMV13C6SYA197 DCMZ13C6SYA197 DCMN13C6SYA197
DC 17W5 DCMV17C5SYA197 DCMZ17C5SYA197 DCMN17C5SYA197
DC 21WA4 DCMV21CA4SYA197 DCMZ21CA4SYA197 DCMN21CA4SYA197
DC 25W3 DCMV25C3SYA197 DCMZ25C3SYA197 DCMN25C3SYA197
DC 27W2 DCMV27C2SYA197 DCMZ27C2SYA197 DCMN27C2SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DEMV5X1SYA197
For performance class 2 substitute K126 for A197. Example: DEMV5C1SYK126
For DD shell sizes, see page 59.
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change
58
D
AC
B
E
10°
7,62 ± 0,25
(.300 ± .010)
Ø 0,60
(.024)
0,82
(.032)
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
3,45
(.136)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
L
Ø 0,51
(.020)
2,54
(.100) 0,62
(.024)
5,69
(.224)
2,84
(.112)
W
F
D Subminiature Combo D
Coaxial Straight — European PC Tails (Size DD)
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 240.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24C7PYK87 DDMZ24C7PYK87 DDMN24C7PYK87
DD 36W4 DDMV36C4PYK87 DDMZ36C4PYK87 DDMN36C4PYK87
DD 43W2 DDMV43C2PYK87 DDMZ43C2PYK87 DDMN43C2PYK87
DD 47W1 DDMV47C1PYK87 DDMZ47C1PYK87 DDMN47C1PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7PYK87
For tin plated PC tails add A226 (signal contacts only). Example: DDMV24C7PYK87A226
For performance class 2 substitute K127 for K87. Example: DDMV24C7PYK127
Dimensions are shown in mm (inch)
Dimensions subject to change 59
10°
D
A
C
B
E
7,62 ± 0,25
(.300 ± .010)
Ø 0,60
(.024)
0,82
(.032)
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
3,45
(.136)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
Ø 0,51
(.020)
0,62
(.024)
2,54
(.100)
L
2,84
(.112)
5,69
(.224)
W
F
D Subminiature Combo D
Coaxial Straight — European PC Tails (Size DD)
Hardware and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 243.
ɀFor panel cutouts, see page 221.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24C7SYA197 DDMZ24C7SYA197 DDMN24C7SYA197
DD 36W4 DDMV36C4SYA197 DDMZ36C4SYA197 DDMN36C4SYA197
DD 43W2 DDMV43C2SYA197 DDMZ43C2SYA197 DDMN43C2SYA197
DD 47W1 DDMV47C1SYA197 DDMZ47C1SYA197 DDMN47C1SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: * For 50 Ohm Coaxial substitute X for C. Example: DDMV24X7SYA197
For performance class 2 substitute K126 for A197. Example: DDMV24C7SYK126
Dimensions are shown in mm (inch)
Dimensions subject to change
60
D Subminiature Combo D
40 A High Power 90°— Standard Footprint .489ɍor .454 inchɍɍ (Sizes DE-DC)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5H1PJK87 DEMC5H1PJK87 DEMD5H1PJK87 DEMG5H1PJK87
DA 7W2 DAMP7H2PJK87 DAMC7H2PJK87 DAMD7H2PJK87 DAMG7H2PJK87
DA 11W1 DAMP11H1PJK87 DAMC11H1PJK87 DAMD11H1PJK87 DAMG11H1PJK87
DA 3W3 DAMP3H3PJK87 DAMC3H3PJK87 DAMD3H3PJK87 DAMG3H3PJK87
DA 3WK3DAMP3HK3PJK87TM DAMC3HK3PJK87TM DAMD3HK3PJK87TM DAMG3HK3PJK87TM
DB 5W5 DBMP5H5PJK87 DBMC5H5PJK87 DBMD5H5PJK87 DBMG5H5PJK87
DB 9W4 DBMP9H4PJK87 DBMC9H4PJK87 DBMD9H4PJK87 DBMG9H4PJK87
DB 13W3 DBMP13H3PJK87 DBMC13H3PJK87 DBMD13H3PJK87 DBMG13H3PJK87
DB 17W2 DBMP17H2PJK87 DBMC17H2PJK87 DBMD17H2PJK87 DBMG17H2PJK87
DB 21W1 DBMP21H1PJK87 DBMC21H1PJK87 DBMD21H1PJK87 DBMG21H1PJK87
DC 8W8 DCMP8H8PJK87 DCMC8H8PJK87 DCMD8H8PJK87 DCMG8H8PJK87
DC 13W6 DCMP13H6PJK87 DCMC13H6PJK87 DCMD13H6PJK87 DCMG13H6PJK87
DC 17W5 DCMP17H5PJK87 DCMC17H5PJK87 DCMD17H5PJK87 DCMG17H5PJK87
DC 21WA4 DCMP21HA4PJK87 DCMC21HA4PJK87 DCMD21HA4PJK87 DCMG21HA4PJK87
DC 25W3 DCMP25H3PJK87 DCMC25H3PJK87 DCMD25H3PJK87 DCMG25H3PJK87
DC 27W2 DCMP27H2PJK87 DCMC27H2PJK87 DCMD27H2PJK87 DCMG27H2PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMP5H1PJK127
For DD shell sizes, see page 62.
Keyed.
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
AC
B
ED
Ø 0,76
(.030) Ø 3,18
(.125)
2,92
(.115)
BOARDLOCK 10°
3,89 (.153)
MIN.
20,57 ± 0,38
(.810 ±.015)
L
F
W
2,84
(.112)
11,53 ± 0,25
(.454 ± .010)
4,33 ± 0,38
(.170 ± .015)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 244-245.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
12,34
(.486) 8,64
(.340)
6,50 ± 0,25
(.256 ± .010)
BRACKET,
METAL
RIVNUT
#4-40 UNC
SCREW LOCK
#4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change 61
D Subminiature Combo D
40 A High Power 90°— Standard Footprint .489ɍor .454 inchɍɍ (Sizes DE-DC)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5H1SJA197 DEMC5H1SJA197 DEMD5H1SJA197 DEMG5H1SJA197
DA 7W2 DAMP7H2SJA197 DAMC7H2SJA197 DAMD7H2SJA197 DAMG7H2SJA197
DA 11W1 DAMP11H1SJA197 DAMC11H1SJA197 DAMD11H1SJA197 DAMG11H1SJA197
DA 3W3 DAMP3H3SJA197 DAMC3H3SJA197 DAMD3H3SJA197 DAMG3H3SJA197
DA 3WK3DAMP3HK3SJA197TM DAMC3HK3SJA197TM DAMD3HK3SJA197TM DAMG3HK3SJA197TM
DB 5W5 DBMP5H5SJA197 DBMC5H5SJA197 DBMD5H5SJA197 DBMG5H5SJA197
DB 9W4 DBMP9H4SJA197 DBMC9H4SJA197 DBMD9H4SJA197 DBMG9H4SJA197
DB 13W3 DBMP13H3SJA197 DBMC13H3SJA197 DBMD13H3SJA197 DBMG13H3SJA197
DB 17W2 DBMP17H2SJA197 DBMC17H2SJA197 DBMD17H2SJA197 DBMG17H2SJA197
DB 21W1 DBMP21H1SJA197 DBMC21H1SJA197 DBMD21H1SJA197 DBMG21H1SJA197
DC 8W8 DCMP8H8SJA197 DCMC8H8SJA197 DCMD8H8SJA197 DCMG8H8SJA197
DC 13W6 DCMP13H6SJA197 DCMC13H6SJA197 DCMD13H6SJA197 DCMG13H6SJA197
DC 17W5 DCMP17H5SJA197 DCMC17H5SJA197 DCMD17H5SJA197 DCMG17H5SJA197
DC 21WA4 DCMP21HA4SJA197 DCMC21HA4SJA197 DCMD21HA4SJA197 DCMG21HA4SJA197
DC 25W3 DCMP25H3SJA197 DCMC25H3SJA197 DCMD25H3SJA197 DCMG25H3SJA197
DC 27W2 DCMP27H2SJA197 DCMC27H2SJA197 DCMD27H2SJA197 DCMG27H2SJA197
Note: For contacts with 30 microinches of gold substitute K126 for A197. Example: DEMP5H1SJK126
For DD shell sizes, see page 63.
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
2,92
(.115)
Ø 0,76
(.030)
L
20,57 ± 0,38
(.810 ± .015)
3,89 (.153)
MIN.
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
11,53 ± 0,25
(.454 ± .010)
WF
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 247-248.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
SCREW LOCK
#4-40 UNC
BRACKET,
METAL
RIVNUT
#4-40 UNC
12,34
(.486) 8,64
(.340)
6,50 ± 0,25
(.256 ± .010)
Dimensions are shown in mm (inch)
Dimensions subject to change
62
D Subminiature Combo D
40 A High Power 90°— Standard Footprint .489ɍor .454 inchɍɍ (Size DD)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMP24H7PJK87 DDMC24H7PJK87 DDMD24H7PJK87 DDMG24H7PJK87
DD 36W4 DDMP36H4PJK87 DDMC36H4PJK87 DDMD36H4PJK87 DDMG36H4PJK87
DD 43W2 DDMP43H2PJK87 DDMC43H2PJK87 DDMD43H2PJK87 DDMG43H2PJK87
DD 47W1 DDMP47H1PJK87 DDMC47H1PJK87 DDMD47H1PJK87 DDMG47H1PJK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMP24H7PJK127
10°
C
A
ED
Ø3.18
(.125) Ø0,76
(.030)
2,92
(.115)
B
BOARDLOCK
13,74
(.541) 10,06
(.396)
6,50 ± 0,25
(.256 ± .010) SCREW LOCK
#4-40 UNC
RIVNUT
#4-40 UNC
BRACKET,
METAL
20,57 ± 0,38
(.810 ± .015)
3,89 (.153)
MIN
L
5,68
(.224) 4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
F
W
11,53 ± 0,25
(.454 ± .010)
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 246.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 63
D Subminiature Combo D
40 A High Power 90°— Standard Footprint .489ɍor .454 inchɍɍ (Size DD)
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMP24H7SJA197 DDMC24H7SJA197 DDMD24H7SJA197 DDMG24H7SJA197
DD 36W4 DDMP36H4SJA197 DDMC36H4SJA197 DDMD36H4SJA197 DDMG36H4SJA197
DD 43W2 DDMP43H2SJA197 DDMC43H2SJA197 DDMD43H2SJA197 DDMG43H2SJA197
DD 47W1 DDMP47H1SJA197 DDMC47H1SJA197 DDMD47H1SJA197 DDMG47H1SJA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMP24H7SJK126
Ø 0,76
(.030) Ø 3,18
(.125)
2,92
(.115)
D
BOARDLOCK 10°
A
C
B
E
13,74
(.541) 10,06
(.396)
6,50 ± 0,25
(.256 ± .010) SCREW LOCK
#4-40 UNC
RIVNUT
#4-40 UNC
BRACKET,
METAL
20,57 ± 0,38
(.810 ± .015)
L
3,89 (.153)
MIN
5,68
(.224)
2,84
(.112)
F
W
11,53 ± 0,25
(.454 ± .010)
4,33 ± 0,38
(.170 ± .015)
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 249.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
64
14,55
(.573) 10,85
(.427)
6,50 ± 0,25
(.256 ± .010)
RIVNUT
#4-40 UNC
BRACKET,
METAL
SCREW LOCK
#4-40 UNC
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
1,00 (.039)
AC
B
ED
Ø 2,90
(.114)
Ø 0,60
(.024)
2,92
(.115)
BOARDLOCK
11,94 ± 0,25
(.470 ± .010)
3,30 (.130)
MIN.
L
4,00 (.157)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
W
F
D Subminiature Combo D
40 A High Power 90°— European Footprint 10,2ɍor 9,4 mmɍɍ (Sizes DE-DC)
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 250-251.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5P1PVK87 DEMC5P1PVK87 DEMD5P1PVK87 DEMG5P1PVK87
DA 7W2 DAMP7P2PVK87 DAMC7P2PVK87 DAMD7P2PVK87 DAMG7P2PVK87
DA 11W1 DAMP11P1PVK87 DAMC11P1PVK87 DAMD11P1PVK87 DAMG11P1PVK87
DA 3W3 DAMP3P3PVK87 DAMC3P3PVK87 DAMD3P3PVK87 DAMG3P3PVK87
DA 3WK3DAMP3PK3PVK87TM DAMC3PK3PVK87TM DAMD3PK3PVK87TM DAMG3PK3PVK87TM
DB 5W5 DBMP5P5PVK87 DBMC5P5PVK87 DBMD5P5PVK87 DBMG5P5PVK87
DB 9W4 DBMP9P4PVK87 DBMC9P4PVK87 DBMD9P4PVK87 DBMG9P4PVK87
DB 13W3 DBMP13P3PVK87 DBMC13P3PVK87 DBMD13P3PVK87 DBMG13P3PVK87
DB 17W2 DBMP17P2PVK87 DBMC17P2PVK87 DBMD17P2PVK87 DBMG17P2PVK87
DB 21W1 DBMP21P1PVK87 DBMC21P1PVK87 DBMD21P1PVK87 DBMG21P1PVK87
DC 8W8 DCMP8P8PVK87 DCMC8P8PVK87 DCMD8P8PVK87 DCMG8P8PVK87
DC 13W6 DCMP13P6PVK87 DCMC13P6PVK87 DCMD13P6PVK87 DCMG13P6PVK87
DC 17W5 DCMP17P5PVK87 DCMC17P5PVK87 DCMD17P5PVK87 DCMG17P5PVK87
DC 21WA4 DCMP21PA4PVK87 DCMC21PA4PVK87 DCMD21PA4PVK87 DCMG21PA4PVK87
DC 25W3 DCMP25P3PVK87 DCMC25P3PVK87 DCMD25P3PVK87 DCMG25P3PVK87
DC 27W2 DCMP27P2PVK87 DCMC27P2PVK87 DCMD27P2PVK87 DCMG27P2PVK87
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: For tin plated PC tails add A226 (signal contacts only). Example DEMP5P1PVK87A226
For performance class 2 substitute K127 for K87. Example: DEMP5P1PVK127
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change 65
A
C
B
ED
2,92
(.115)
Ø 2,90
(.114)
Ø 0,60
(.024)
BOARDLOCK
1,00 (.039)
14,55
(.573) 10,85
(.427)
6,50 ± 0,25
(.256 ± .010)
RIVNUT
#4-40 UNC
BRACKET,
METAL
SCREW LOCK
#4-40 UNC
11,94 ± 0,25
(.470 ± .010)
3,30 (.130)
MIN.
L
4,00 (.157)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
W
F
D Subminiature Combo D
40 A High Power 90°— European Footprint 10,2ɍor 9,4 mmɍɍ (Sizes DE-DC)
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0.76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 252-253.
ɀFor panel cutouts, see page 221.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMP5P1SVA197 DEMC5P1SVA197 DEMD5P1SVA197 DEMG5P1SVA197
DA 7W2 DAMP7P2SVA197 DAMC7P2SVA197 DAMD7P2SVA197 DAMG7P2SVA197
DA 11W1 DAMP11P1SVA197 DAMC11P1SVA197 DAMD11P1SVA197 DAMG11P1SVA197
DA 3W3 DAMP3P3SVA197 DAMC3P3SVA197 DAMD3P3SVA197 DAMG3P3SVA197
DA 3WK3DAMP3PK3SVA197TM DAMC3PK3SVA197TM DAMD3PK3SVA197TM DAMG3PK3SVA197TM
DB 5W5 DBMP5P5SVA197 DBMC5P5SVA197 DBMD5P5SVA197 DBMG5P5SVA197
DB 9W4 DBMP9P4SVA197 DBMC9P4SVA197 DBMD9P4SVA197 DBMG9P4SVA197
DB 13W3 DBMP13P3SVA197 DBMC13P3SVA197 DBMD13P3SVA197 DBMG13P3SVA197
DB 17W2 DBMP17P2SVA197 DBMC17P2SVA197 DBMD17P2SVA197 DBMG17P2SVA197
DB 21W1 DBMP21P1SVA197 DBMC21P1SVA197 DBMD21P1SVA197 DBMG21P1SVA197
DC 8W8 DCMP8P8SVA197 DCMC8P8SVA197 DCMD8P8SVA197 DCMG8P8SVA197
DC 13W6 DCMP13P6SVA197 DCMC13P6SVA197 DCMD13P6SVA197 DCMG13P6SVA197
DC 17W5 DCMP17P5SVA197 DCMC17P5SVA197 DCMD17P5SVA197 DCMG17P5SVA197
DC 21WA4 DCMP21PA4SVA197 DCMC21PA4SVA197 DCMD21PA4SVA197 DCMG21PA4SVA197
DC 25W3 DCMP25P3SVA197 DCMC25P3SVA197 DCMD25P3SVA197 DCMG25P3SVA197
DC 27W2 DCMP27P2SVA197 DCMC27P2SVA197 DCMD27P2SVA197 DCMG27P2SVA197
For M3 threads replace MP with MS, MC with ML, MD with MO, MG with MJ.
Notes: For performance class 2 substitute K126 for A197. Example: DEMP5P1SVK126
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change
66
D Subminiature Combo D
40 A High Power Straight — Standard PC Tails (Sizes DE-DC)
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5H1PNK87 DEMZ5H1PNK87 DEMN5H1PNK87
DA 7W2 DAMV7H2PNK87 DAMZ7H2PNK87 DAMN7H2PNK87
DA 11W1 DAMV11H1PNK87 DAMZ11H1PNK87 DAMN11H1PNK87
DA 3W3 DAMV3H3PNK87 DAMZ3H3PNK87 DAMN3H3PNK87
DA 3WK3DAMV3HK3PNK87TM DAMZ3HK3PNK87TM DAMN3HK3PNK87TM
DB 5W5 DBMV5H5PNK87 DBMZ5H5PNK87 DBMN5H5PNK87
DB 9W4 DBMV9H4PNK87 DBMZ9H4PNK87 DBMN9H4PNK87
DB 13W3 DBMV13H3PNK87 DBMZ13H3PNK87 DBMN13H3PNK87
DB 17W2 DBMV17H2PNK87 DBMZ17H2PNK87 DBMN17H2PNK87
DB 21W1 DBMV21H1PNK87 DBMZ21H1PNK87 DBMN21H1PNK87
DC 8W8 DCMV8H8PNK87 DCMZ8H8PNK87 DCMN8H8PNK87
DC 13W6 DCMV13H6PNK87 DCMZ13H6PNK87 DCMN13H6PNK87
DC 17W5 DCMV17H5PNK87 DCMZ17H5PNK87 DCMN17H5PNK87
DC 21WA4 DCMV21HA4PNK87 DCMZ21HA4PNK87 DCMN21HA4PNK87
DC 25W3 DCMV25H3PNK87 DCMZ25H3PNK87 DCMN25H3PNK87
DC 27W2 DCMV27H2PNK87 DCMZ27H2PNK87 DCMN27H2PNK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DEMV5H1PNK127
For DD shell sizes, see page 68.
Keyed.
AC
B
ED
10°
4,65
(.183)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
Ø 3,18
(.125)
Ø 0,76
(.030)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC WF
2,84
(.112)
L
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 254-255.
ɀFor panel cutouts, see page 221.
Dimensions are shown in mm (inch)
Dimensions subject to change 67
D Subminiature Combo D
40 A High Power Straight — Standard PC Tails (Sizes DE-DC)
Screw lock, boardlock and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5H1SNA197 DEMZ5H1SNA197 DEMN5H1SNA197
DA 7W2 DAMV7H2SNA197 DAMZ7H2SNA197 DAMN7H2SNA197
DA 11W1 DAMV11H1SNA197 DAMZ11H1SNA197 DAMN11H1SNA197
DA 3W3 DAMV3H3SNA197 DAMZ3H3SNA197 DAMN3H3SNA197
DA 3WK3DAMV3HK3SNA197TM DAMZ3HK3SNA197TM DAMN3HK3SNA197TM
DB 5W5 DBMV5H5SNA197 DBMZ5H5SNA197 DBMN5H5SNA197
DB 9W4 DBMV9H4SNA197 DBMZ9H4SNA197 DBMN9H4SNA197
DB 13W3 DBMV13H3SNA197 DBMZ13H3SNA197 DBMN13H3SNA197
DB 17W2 DBMV17H2SNA197 DBMZ17H2SNA197 DBMN17H2SNA197
DB 21W1 DBMV21H1SNA197 DBMZ21H1SNA197 DBMN21H1SNA197
DC 8W8 DCMV8H8SNA197 DCMZ8H8SNA197 DCMN8H8SNA197
DC 13W6 DCMV13H6SNA197 DCMZ13H6SNA197 DCMN13H6SNA197
DC 17W5 DCMV17H5SNA197 DCMZ17H5SNA197 DCMN17H5SNA197
DC 21WA4 DCMV21HA4SNA197 DCMZ21HA4SNA197 DCMN21HA4SNA197
DC 25W3 DCMV25H3SNA197 DCMZ25H3SNA197 DCMN25H3SNA197
DC 27W2 DCMV27H2SNA197 DCMZ27H2SNA197 DCMN27H2SNA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DEMV5H1SNK126
For DD shell sizes, see page 69.
Keyed.
AC
B
D
E
10°
4,65
(.183)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
Ø 3,18
(.125)
Ø 0,76
(.030)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
2,84
(.112)
LF
W
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 257-258.
ɀFor panel cutouts, see page 221.
Dimensions are shown in mm (inch)
Dimensions subject to change
68
D Subminiature Combo D
40 A High Power Straight — Standard PC Tails (Size DD)
Screw lock, boardlock, and high power contact
removed for clarity
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24H7PNK87 DDMZ24H7PNK87 DDMN24H7PNK87
DD 36W4 DDMV36H4PNK87 DDMZ36H4PNK87 DDMN36H4PNK87
DD 43W2 DDMV43H2PNK87 DDMZ43H2PNK87 DDMN43H2PNK87
DD 47W1 DDMV47H1PNK87 DDMZ47H1PNK87 DDMN47H1PNK87
Note: For contacts with 30 microinches gold substitute K127 for K87. Example: DDMV24H7PNK127
A
C
B
ED
10°
7,62 ± 0,25
(.300 ± .010)
Ø 0,76
(.030)
Ø 3,18
(.125)
6,50 ± 0,25
(.256 ± .010)
4,65
(.183)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
5,69
(.224) 2,84
(.112)
LWF
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 256.
ɀFor panel cutouts, see page 221.
Dimensions are shown in mm (inch)
Dimensions subject to change 69
D Subminiature Combo D
40 A High Power Straight — Standard PC Tails (Size DD)
Screw lock, boardlock and high power contact
removed for clarity
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24H7SNA197 DDMZ24H7SNA197 DDMN24H7SNA197
DD 36W4 DDMV36H4SNA197 DDMZ36H4SNA197 DDMN36H4SNA197
DD 43W2 DDMV43H2SNA197 DDMZ43H2SNA197 DDMN43H2SNA197
DD 47W1 DDMV47H1SNA197 DDMZ47H1SNA197 DDMN47H1SNA197
Note: For contacts with 30 microinches gold substitute K126 for A197. Example: DDMV24H7SNK126
A
C
B
ED
10°
5,69
(.224)
LWF
2,84
(.112)
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 259.
ɀFor panel cutouts, see page 221.
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
Ø 3,18
(.125)
Ø 0,76
(.030)
4,65
(.183)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change
70
AC
B
D
E
10°
7.62 ± 0,25
(.300 ± .010)
Ø 0,60
(.024)
Ø 3,18
(.125)
6,50 ± 0,25
(.256 ± .010)
2,92
(.115)
BOARDLOCK
4,65
(.183)
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
2,84
(.112)
L
W
F
D Subminiature Combo D
40 A High Power Straight — European PC Tails (Sizes DE-DC)
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 254-255.
ɀFor panel cutouts, see page 221.
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5H1PYK87 DEMZ5H1PYK87 DEMN5H1PYK87
DA 7W2 DAMV7H2PYK87 DAMZ7H2PYK87 DAMN7H2PYK87
DA 11W1 DAMV11H1PYK87 DAMZ11H1PYK87 DAMN11H1PYK87
DA 3W3 DAMV3H3PYK87 DAMZ3H3PYK87 DAMN3H3PYK87
DA 3WK3DAMV3HK3PYK87TM DAMZ3HK3PYK87TM DAMN3HK3PYK87TM
DB 5W5 DBMV5H5PYK87 DBMZ5H5PYK87 DBMN5H5PYK87
DB 9W4 DBMV9H4PYK87 DBMZ9H4PYK87 DBMN9H4PYK87
DB 13W3 DBMV13H3PYK87 DBMZ13H3PYK87 DBMN13H3PYK87
DB 17W2 DBMV17H2PYK87 DBMZ17H2PYK87 DBMN17H2PYK87
DB 21W1 DBMV21H1PYK87 DBMZ21H1PYK87 DBMN21H1PYK87
DC 8W8 DCMV8H8PYK87 DCMZ8H8PYK87 DCMN8H8PYK87
DC 13W6 DCMV13H6PYK87 DCMZ13H6PYK87 DCMN13H6PYK87
DC 17W5 DCMV17H5PYK87 DCMZ17H5PYK87 DCMN17H5PYK87
DC 21WA4 DCMV21HA4PYK87 DCMZ21HA4PYK87 DCMN21HA4PYK87
DC 25W3 DCMV25H3PYK87 DCMZ25H3PYK87 DCMN25H3PYK87
DC 27W2 DCMV27H2PYK87 DCMZ27H2PYK87 DCMN27H2PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: For tin plated PC tails add A226 (signal contacts only). Example: DEMV5H1PYK87A226
For performance class 2 substitute K127 for K87. Example: DEMV5H1PYK127
For DD shell sizes, see page 72.
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change 71
10°
E
BC
A
D
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010) 2,92
(.115)
Ø 0,60
(.024)
Ø 3,18
(.125)
BOARDLOCK
4,65
(.183)
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
2,84
(.112)
L
W
F
D Subminiature Combo D
40 A High Power Straight — European PC Tails (Sizes DE-DC)
Screw lock, boardlock, and high power contact
removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 257-258.
ɀFor panel cutouts, see page 221.
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMV5H1SYA197 DEMZ5H1SYA197 DEMN5H1SYA197
DA 7W2 DAMV7H2SYA197 DAMZ7H2SYA197 DAMN7H2SYA197
DA 11W1 DAMV11H1SYA197 DAMZ11H1SYA197 DAMN11H1SYA197
DA 3W3 DAMV3H3SYA197 DAMZ3H3SYA197 DAMN3H3SYA197
DA 3WK3DAMV3HK3SYA197TM DAMZ3HK3SYA197TM DAMN3HK3SYA197TM
DB 5W5 DBMV5H5SYA197 DBMZ5H5SYA197 DBMN5H5SYA197
DB 9W4 DBMV9H4SYA197 DBMZ9H4SYA197 DBMN9H4SYA197
DB 13W3 DBMV13H3SYA197 DBMZ13H3SYA197 DBMN13H3SYA197
DB 17W2 DBMV17H2SYA197 DBMZ17H2SYA197 DBMN17H2SYA197
DB 21W1 DBMV21H1SYA197 DBMZ21H1SYA197 DBMN21H1SYA197
DC 8W8 DCMV8H8SYA197 DCMZ8H8SYA197 DCMN8H8SYA197
DC 13W6 DCMV13H6SYA197 DCMZ13H6SYA197 DCMN13H6SYA197
DC 17W5 DCMV17H5SYA197 DCMZ17H5SYA197 DCMN17H5SYA197
DC 21WA4 DCMV21HA4SYA197 DCMZ21HA4SYA197 DCMN21HA4SYA197
DC 25W3 DCMV25H3SYA197 DCMZ25H3SYA197 DCMN25H3SYA197
DC 27W2 DCMV27H2SYA197 DCMZ27H2SYA197 DCMN27H2SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: For performance class 2 substitute K126 for A197. Example: DEMV5H1SYK126
For DD shell sizes, see page 73.
Keyed.
Dimensions are shown in mm (inch)
Dimensions subject to change
72
E
A
C
B
D
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
BOARDLOCK Ø 3,18
(.125) Ø 0,60
(.024)
4,65
(.183)
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
2,84
(.112)
5,69
(.224)
L
W
F
D Subminiature Combo D
40 A High Power Straight — European PC Tails (Size DD)
Screw lock, boardlock, and high power
contact removed for clarity
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 256.
ɀFor panel cutouts, see page 221.
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24H7PYK87 DDMZ24H7PYK87 DDMN24H7PYK87
DD 36W4 DDMV36H4PYK87 DDMZ36H4PYK87 DDMN36H4PYK87
DD 43W2 DDMV43H2PYK87 DDMZ43H2PYK87 DDMN43H2PYK87
DD 47W1 DDMV47H1PYK87 DDMZ47H1PYK87 DDMN47H1PYK87
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Notes: For tin plated PC tails add A226 (signal contacts only). Example DDMV24H7PYK87A226
For performance class 2 substitute K127 for K87. Example: DDMV24H7PYK127
Dimensions are shown in mm (inch)
Dimensions subject to change 73
E
A
C
B
D
BOARDLOCK
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
Ø 0,60
(.024) Ø 3,18
(.125)
4,65
(.183)
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
2,84
(.112)
5,69
(.224)
L
W
F
D Subminiature Combo D
40 A High Power Straight — European PC Tails (Size DD)
Screw lock, boardlock, and high power
contact removed for clarity
Receptacle
Engaging Face
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 259.
ɀFor panel cutouts, see page 221.
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMV24H7SYA197 DDMZ24H7SYA197 DDMN24H7SYA197
DD 36W4 DDMV36H4SYA197 DDMZ36H4SYA197 DDMN36H4SYA197
DD 43W2 DDMV43H2SYA197 DDMZ43H2SYA197 DDMN43H2SYA197
DD 47W1 DDMV47H1SYA197 DDMZ47H1SYA197 DDMN47H1SYA197
For M3 threads replace MV with MT, MZ with MQ, MN with MU.
Note: For performance class 2 substitute K126 for A197. Example: DDMV24H7SYK126
Dimensions are shown in mm (inch)
Dimensions subject to change
74
D Subminiature Combo D
90°PC Tail — European Footprint 10,2ɍor 9,4 mmɍɍ (Sizes DE-DD)
Part Numbers
Shell Size Layout Part Number
Without Hardware Part Number
Metal Bracket With #4-40 Nut
DE 5W1 DEM-5W1P-1A0N-K87 DEM-5W1P-1A7N-K87
DA 7W2 DAM-7W2P-1A0N-K87 DAM-7W2P-1A7N-K87
DA 11W1 DAM-11W1P-1A0N-K87 DAM-11W1P-1A7N-K87
DA 3W3 DAM-3W3P-1A0N-K87 DAM-3W3P-1A7N-K87
DA 3WK3DAM-3WK3P-1A0N-K87 DAM-3WK3P-1A7N-K87
DB 5W5 DBM-5W5P-1A0N-K87 DBM-5W5P-1A7N-K87
DB 9W4 DBM-9W4P-1A0N-K87 DBM-9W4P-1A7N-K87
DB 13W3 DBM-13W3P-1A0N-K87 DBM-13W3P-1A7N-K87
DB 17W2 DBM-17W2P-1A0N-K87 DBM-17W2P-1A7N-K87
DB 21W1 DBM-21W1P-1A0N-K87 DBM-21W1P-1A7N-K87
DC 8W8 DCM-8W8P-1A0N-K87 DCM-8W8P-1A7N-K87
DC 13W6 DCM-13W6P-1A0N-K87 DCM-13W6P-1A7N-K87
DC 17W5 DCM-17W5P-1A0N-K87 DCM-17W5P-1A7N-K87
DC 21WA4 DCM-21WA4P-1A0N-K87 DCM-21WA4P-1A7N-K87
DC 25W3 DCM-25W3P-1A0N-K87 DCM-25W3P-1A7N-K87
DC 27W2 DCM-27W2P-1A0N-K87 DCM-27W2P-1A7N-K87
DD 24W7 DDM-24W7P-1A0N-K87 DDM-24W7P-1A7N-K87
DD 36W4 DDM-36W4P-1A0N-K87 DDM-36W4P-1A7N-K87
DD 43W2 DDM-43W2P-1A0N-K87 DDM-43W2P-1A7N-K87
DD 47W1 DDM-47W1P-1A0N-K87 DDM-47W1P-1A7N-K87
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-1A0N-A191-K87
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Plug
Engaging Face
DD Configuration
10°
AC
ED
B
Ø 0,60
(.024)
Ø 3,05
(.120)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
WF
5,00
(.197)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008) K
L
5,08
(.200)
5,00
(.197)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 260-262.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Dimensions are shown in mm (inch)
Dimensions subject to change 75
D Subminiature Combo D
90°PC Tail — European Footprint 10,2ɍor 9,4 mmɍɍ (Sizes DE-DD)
Part Numbers
Shell Size Layout Part Number
Without Hardware Part Number
Metal Bracket With #4-40 Nut
DE 5W1 DEM-5W1S-1A0N-A197 DEM-5W1S-1A7N-A197
DA 7W2 DAM-7W2S-1A0N-A197 DAM-7W2S-1A7N-A197
DA 11W1 DAM-11W1S-1A0N-A197 DAM-11W1S-1A7N-A197
DA 3W3 DAM-3W3S-1A0N-A197 DAM-3W3S-1A7N-A197
DA 3WK3DAM-3WK3S-1A0N-A197 DAM-3WK3S-1A7N-A197
DB 5W5 DBM-5W5S-1A0N-A197 DBM-5W5S-1A7N-A197
DB 9W4 DBM-9W4S-1A0N-A197 DBM-9W4S-1A7N-A197
DB 13W3 DBM-13W3S-1A0N-A197 DBM-13W3S-1A7N-A197
DB 17W2 DBM-17W2S-1A0N-A197 DBM-17W2S-1A7N-A197
DB 21W1 DBM-21W1S-1A0N-A197 DBM-21W1S-1A7N-A197
DC 8W8 DCM-8W8S-1A0N-A197 DCM-8W8S-1A7N-A197
DC 13W6 DCM-13W6S-1A0N-A197 DCM-13W6S-1A7N-A197
DC 17W5 DCM-17W5S-1A0N-A197 DCM-17W5S-1A7N-A197
DC 21WA4 DCM-21WA4S-1A0N-A197 DCM-21WA4S-1A7N-A197
DC 25W3 DCM-25W3S-1A0N-A197 DCM-25W3S-1A7N-A197
DC 27W2 DCM-27W2S-1A0N-A197 DCM-27W2S-1A7N-A197
DD 24W7 DDM-24W7S-1A0N-A197 DDM-24W7S-1A7N-A197
DD 36W4 DDM-36W4S-1A0N-A197 DDM-36W4S-1A7N-A197
DD 43W2 DDM-43W2S-1A0N-A197 DDM-43W2S-1A7N-A197
DD 47W1 DDM-47W1S-1A0N-A197 DDM-47W1S-1A7N-A197
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-1A0N-A191-A197
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Receptacle
Engaging Face DD Configuration
10°
AC
ED
B
Ø 0,60
(.024)
Ø 3,05
(.120)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
WF
5,00
(.197)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 263-265.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
2,54
(.100)
9,40 ± 0,20
(.370 ± .008) K
L
5,08
(.200)
5,00
(.197)
Dimensions are shown in mm (inch)
Dimensions subject to change
76
D Subminiature Combo D
Straight PC Tails — European (Sizes DE-DD)
Part Numbers
Shell Size Layout
Part Number
X
4,60 (.181)
Part Number
X
6,05 (.238)
DE 5W1 DEM-5W1P-OL2-K87 DEM-5W1P-OL4-K87
DA 7W2 DAM-7W2P-OL2-K87 DAM-7W2P-OL4-K87
DA 11W1 DAM-11W1P-OL2-K87 DAM-11W1P-OL4-K87
DA 3W3 DAM-3W3P-OL2-K87 DAM-3W3P-OL4-K87
DA 3WK3DAM-3WK3P-OL2-K87 DAM-3WK3P-OL4-K87
DB 5W5 DBM-5W5P-OL2-K87 DBM-5W5P-OL4-K87
DB 9W4 DBM-9W4P-OL2-K87 DBM-9W4P-OL4-K87
DB 13W3 DBM-13W3P-OL2-K87 DBM-13W3P-OL4-K87
DB 17W2 DBM-17W2P-OL2-K87 DBM-17W2P-OL4-K87
DB 21W1 DBM-21W1P-OL2-K87 DBM-21W1P-OL4-K87
DC 8W8 DCM-8W8P-OL2-K87 DCM-8W8P-OL4-K87
DC 13W6 DCM-13W6P-OL2-K87 DCM-13W6P-OL4-K87
DC 17W5 DCM-17W5P-OL2-K87 DCM-17W5P-OL4-K87
DC 21WA4 DCM-21WA4P-OL2-K87 DCM-21WA4P-OL4-K87
DC 25W3 DCM-25W3P-OL2-K87 DCM-25W3P-OL4-K87
DC 27W2 DCM-27W2P-OL2-K87 DCM-27W2P-OL4-K87
DD 24W7 DDM-24W7P-OL2-K87 DDM-24W7P-OL4-K87
DD 36W4 DDM-36W4P-OL2-K87 DDM-36W4P-OL4-K87
DD 43W2 DDM-43W2P-OL2-K87 DDM-43W2P-OL4-K87
DD 47W1 DDM-47W1P-OL2-K87 DDM-47W1P-OL4-K87
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1P-OL2-A191-K87
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Plug
Engaging Face
DD Configuration
10°
AC
ED
BØ 3,05
(.120)
Ø 0,60
(.024)
X
L
K
5,69
(.224) 2,84
(.112)
2,84
(.112)
WF
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 266-268.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Dimensions are shown in mm (inch)
Dimensions subject to change 77
D Subminiature Combo D
Straight PC Tails — European (Sizes DE-DD)
Part Numbers
Shell Size Layout
Part Number
X
4.60 (.181)
Part Number
X
6.05 (.238)
DE 5W1 DEM-5W1S-OL2-A197 DEM-5W1S-OL4-A197
DA 7W2 DAM-7W2S-OL2-A197 DAM-7W2S-OL4-A197
DA 11W1 DAM-11W1S-OL2-A197 DAM-11W1S-OL4-A197
DA 3W3 DAM-3W3S-OL2-A197 DAM-3W3S-OL4-A197
DA 3WK3DAM-3WK3S-OL2-A197 DAM-3WK3S-OL4-A197
DB 5W5 DBM-5W5S-OL2-A197 DBM-5W5S-OL4-A197
DB 9W4 DBM-9W4S-OL2-A197 DBM-9W4S-OL4-A197
DB 13W3 DBM-13W3S-OL2-A197 DBM-13W3S-OL4-A197
DB 17W2 DBM-17W2S-OL2-A197 DBM-17W2S-OL4-A197
DB 21W1 DBM-21W1S-OL2-A197 DBM-21W1S-OL4-A197
DC 8W8 DCM-8W8S-OL2-A197 DCM-8W8S-OL4-A197
DC 13W6 DCM-13W6S-OL2-A197 DCM-13W6S-OL4-A197
DC 17W5 DCM-17W5S-OL2-A197 DCM-17W5S-OL4-A197
DC 21WA4 DCM-21WA4S-OL2-A197 DCM-21WA4S-OL4-A197
DC 25W3 DCM-25W3S-OL2-A197 DCM-25W3S-OL4-A197
DC 27W2 DCM-27W2S-OL2-A197 DCM-27W2S-OL4-A197
DD 24W7 DDM-24W7S-OL2-A197 DDM-24W7S-OL4-A197
DD 36W4 DDM-36W4S-OL2-A197 DDM-36W4S-OL4-A197
DD 43W2 DDM-43W2S-OL2-A197 DDM-43W2S-OL4-A197
DD 47W1 DDM-47W1S-OL2-A197 DDM-47W1S-OL4-A197
Note: Performance class 3 standard, for performance class 2 add -A191. Example: DEM-5W1S-OL2-A191-A197
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Receptacle
Engaging Face
DD Configuration
10°
AC
ED
BØ 3,05
(.120)
L
K
5,69
(.224) 2,84
(.112)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 269-271.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Ø 0,60
(.024)
X
2,84
(.112)
WF
Dimensions are shown in mm (inch)
Dimensions subject to change
78
D Subminiature Combo D
Solder Cup (Sizes DE-DD)
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount Clinch Nut
#4-40 UNC
DE 5W1 DEM5W1PK87 DEMY5W1PK87 DEME5W1PK87
DA 7W2 DAM7W2PK87 DAMY7W2PK87 DAME7W2PK87
DA 11W1 DAM11W1PK87 DAMY11W1PK87 DAME11W1PK87
DA 3W3 DAM3W3PK87 DAMY3W3PK87 DAME3W3PK87
DA 3WK3DAM3WK3PK87 DAMY3WK3PK87 DAME3WK3PK87
DB 5W5 DBMP5W5PK87 DBMY5W5PK87 DBME5W5PK87
DB 9W4 DBM9W4PK87 DBMY9W4PK87 DBME9W4PK87
DB 13W3 DBM13W3PK87 DBMY13W3PK87 DBME13W3PK87
DB 17W2 DBM17W2PK87 DBMY17W2PK87 DBME17W2PK87
DB 21W1 DBM21W1PK87 DBMY21W1PK87 DBME21W1PK87
DC 8W8 DCM8W8PK87 DCMY8W8PK87 DCME8W8PK87
DC 13W6 DCM13W6PK87 DCMY13W6PK87 DCME13W6PK87
DC 17W5 DCM17W5PK87 DCMY17W5PK87 DCME17W5PK87
DC 21WA4 DCM21WA4PK87 DCMY21WA4PK87 DCME21WA4PK87
DC 25W3 DCM25W3PK87 DCMY25W3PK87 DCME25W3PK87
DC 27W2 DCM27W2PK87 DCMY27W2PK87 DCME27W2PK87
DD 24W7 DDM24W7PK87 DDMY24W7PK87 DDME24W7PK87
DD 36W4 DDM36W4PK87 DDMY36W4PK87 DDME36W4PK87
DD 43W2 DDM43W2PK87 DDMY43W2PK87 DDME43W2PK87
DD 47W1 DDM47W1PK87 DDMY47W1PK87 DDME47W1PK87
For contacts with 30 microinches gold substitute K127 for K87. Example: DEM5W1PK127
For M3 clinch nuts substitute X for E. Example: DEMX5W1PK87
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Plug
Engaging Face
10°
ED
A
BØ 3,05
(.120)
C
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
L
K
2,84
(.112)
5,69
(.224)
DD Configuration
10,72 (.422)
MAX
F
W
2,84
(.112)
Dimensions are shown in mm (inch)
Dimensions subject to change 79
D Subminiature Combo D
Solder Cup (Sizes DE-DD)
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount Clinch Nut
#4-40 UNC
DE 5W1 DEM5W1SA197 DEMY5W1SA197 DEME5W1SA197
DA 7W2 DAM7W2SA197 DAMY7W2SA197 DAME7W2SA197
DA 11W1 DAM11W1SA197 DAMY11W1SA197 DAME11W1SA197
DA 3W3 DAM3W3SA197 DAMY3W3SA197 DAME3W3SA197
DA 3WK3DAM3WK3SA197 DAMY3WK3SA197 DAME3WK3SA197
DB 5W5 DBM5W5SA197 DBMY5W5SA197 DBME5W5SA197
DB 9W4 DBM9W4SA197 DBMY9W4SA197 DBME9W4SA197
DB 13W3 DBM13W3SA197 DBMY13W3SA197 DBME13W3SA197
DB 17W2 DBM17W2SA197 DBMY17W2SA197 DBME17W2SA197
DB 21W1 DBM21W1SA197 DBMY21W1SA197 DBME21W1SA197
DC 8W8 DCM8W8SA197 DCMY8W8SA197 DCME8W8SA197
DC 13W6 DCM13W6SA197 DCMY13W6SA197 DCME13W6SA197
DC 17W5 DCM17W5SA197 DCMY17W5SA197 DCME17W5SA197
DC 21WA4 DCM21WA4SA197 DCMY21WA4SA197 DCME21WA4SA197
DC 25W3 DCM25W3SA197 DCMY25W3SA197 DCME25W3SA197
DC 27W2 DCM27W2SA197 DCMY27W2SA197 DCME27W2SA197
DD 24W7 DDM24W7SA197 DDMY24W7SA197 DDME24W7SA197
DD 36W4 DDM36W4SA197 DDMY36W4SA197 DDME36W4SA197
DD 43W2 DDM43W2SA197 DDMY43W2SA197 DDME43W2SA197
DD 47W1 DDM47W1SA197 DDMY47W1SA197 DDME47W1SA197
For contacts with 30 microinches gold substitute K126 for A197. Example: DEM5W1SK126
For M3 clinch nuts substitute X for E. Example: DEMX5W1SA197
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.123) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Receptacle
Engaging Face
A
C
B
ED
Ø 3,05
(.120)
10°
9,91 (.390)
MAX
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
K
L
5,69
(.224) 2,84
(.112)
DD Configuration
2,84 (.112)
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change
80
D Subminiature Combo D
Crimp Cable Connectors without Contacts (Sizes DA-DD)
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor panel cutouts, see page 221.
Part Numbers
Shell Size Layout Part Number
DA 7W2 DAA7W2PK87F0
DA 11W1 DAA11W1PK87F0
DA 3W3 DAA3W3PK87F0
DB 5W5 DBA5W5PK87F0
DB 9W4 DBA9W4PK87F0
DB 13W3 DBA13W3PK87F0
DB 17W2 DBA17W2PK87F0
DB 21W1 DBA21W1PK87F0
DC 8W8 DCA8W8PK87F0
DC 21WA4 DCA21WA4PK87F0
DC 25W3 DCA25W3PK87F0
DD 24W7 DDA24W7PK87F0
DD 36W4 DDA36W4PK87F0
Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Engaging Face
L
K10,92 (.430)
MAX
A
C
B
ED
10°
Dimensions are shown in mm (inch)
Dimensions subject to change 81
D Subminiature Combo D
Crimp Cable Connectors without Contacts (Sizes DA-DD)
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor panel cutouts, see page 221.
Part Numbers
Shell Size Layout Part Number
DA 7W2 DAA7W2SA197F0
DA 11W1 DAA11W1SA197F0
DA 3W3 DAA3W3SA197F0
DB 5W5 DBA5W5SA197F0
DB 9W4 DBA9W4SA197F0
DB 13W3 DBA13W3SA197F0
DB 17W2 DBA17W2SA197F0
DB 21W1 DBA21W1SA197F0
DC 8W8 DCA8W8SA197F0
DC 21WA4 DCA21WA4SA197F0
DD 24W7 DDA24W7SA197F0
DD 36W4 DDA36W4SA197F0
Note: For crimp (Size 20) contacts and tooling, see pages 83 & 275.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,317 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face
L
K10,92 (.430)
MAX
A
C
B
ED
10°
Dimensions are shown in mm (inch)
Dimensions subject to change
82
D Subminiature Combo D
Shield Cans
XCable Ferrule
XAFerrule
Part Number Crimp Tool
Part Number Crimp Tool
Position
4,8 - 5,5 6,25 (.246) 304-8810-000 D115433-1 B
5,5 - 6,2 6,25 (.246) 304-8810-000 D115433-1 A
6,2 - 7,2 8,20 (.323) 304-8811-000 D115433-2 B
7,2 - 8,2 8,20 (.323) 304-8811-000 D115433-2 A
8,2 - 9,5 11,50 (.452) 304-8812-000 D115433-3 B
9,5 - 11,1 11,50 (.452) 304-8813-000 D115433-3 A
FERRULE
CABLE
Ferrule Wire Trim Dimensions
11,25(.443)
Ø A
Ø 11,10(.437)
10,00(.394)
50,00 (1.969)
Crimp Tool Positions
10,10 (.398)
Ø 10,00 (.394)
ɀOrder 1top can, 1bottom can, 1ferrule per
connector.
Materials and Finishes
Shield Can and Ferrule
Material: Steel
Finish: Tin
Part Numbers
Top Can (B size): 348-8946-000
Bottom Can (B size): 348-8945-000
Note: For other available can sizes, consult factory for details.
Dimensions are shown in mm (inch)
Dimensions subject to change 83
Loose Contacts
Stamped contacts with insulation support are
supplied loose for use with hand crimp tooling.
Two sizes are available to accommodate wire
ranges 20 - 26 AWG.
D Subminiature Combo D
Crimp (Size 20) Contacts
Tooling
Hand Crimp Tool
Description Part Number
CCT-D*A-1 995-2000-000
Extraction Tool
Description Part Number Wire Size
CIET-D*A-20-24 980-0008-135 20-24 AWG
CIET-D*A-24-26 980-0008-136 24-26 AWG
For semi-automatic tooling, see page 275.
CCT-D*A-1
Pin Contact Socket Contact
Finish
30Ȗinches Gold over Nickel
For tooling, see this page.
Part Number
Pin Contact
24-26 AWG 20-24 AWG
030-2487-017 030-2487-016
Part Number
Socket Contact
24-26 AWG 20-24 AWG
030-2488-017 030-2488-016
Reeled Contacts (5,000 Pieces per Reel)
Stamped contacts with insulation support are
supplied on reels of 5,000 for use with semi-
automatic strip and crimp machines. Two sizes are
available to accommodate wire ranges 20 - 26
AWG.
Pin Contacts Socket Contacts
Finish
Gold over Nickel
30Ȗinches Gold over Nickel
For semi-automatic tooling, see page 275.
Part Number
Pin Contact
24-26 AWG 20-24 AWG
980-2000-925 980-2000-924
980-2000-946 980-2000-945
Part Number
Socket Contact
24-26 AWG 20-24 AWG
980-2000-926 980-2000-923
980-2000-944 980-2000-943
Pin Contacts Socket Contacts
Dimensions are shown in mm (inch)
Dimensions subject to change
84
D Subminiature Combo D
Cable (Size 8) Loose Contacts — Coaxial 75 Ohm
Stamped Crimp/Crimp Recommended Wire Trim Dimensions
Kit (Body, Ferrule, Center Contact)
Stamped Crimp/Crimp Kit
Gold over Ni Kit
30Ȗin. Gold over Ni Kit
50Ȗin. Gold over Ni RG Cable Number
Plug D130322-2 D130322-1 D130322-6 179/U
Receptacle D130344-1 D130344 D130344-2 179/U
Tooling for Stamped Crimp/Crimp
Description Crimping Tool Tool Number
Stamped Center
Conductor Hand Crimp, ‘‘B’’ Crimp CCTP-750HM
Semi-Automatic Crimper ABT-607 (Leased)
Stamped Outer
Conductor Hand Tool, Hex Crimp CCTP-DM
Pneumatic Hex Crimp 995-2000-094
For semi-automatic tooling, see page 275.
Loose Components for High Volume (3 Pieces — Body, Ferrule, Center Contact)
Stamped Crimp/Crimp Body Ferrule
Center Contact
Gold over Ni
10,000 Reel
Center Contact
30Ȗin. Gold over Ni
10,000 Reel
Plug 249-2272-000 304-0444-000 110238-1015 110238-1012
Receptacle 249-2271-000 304-0444-000 110238-1014 110238-1013
Dimensions are shown in mm (inch)
Dimensions subject to change 85
D Subminiature Combo D
Cable (Size 8) Loose Contacts — Coaxial 75 Ohm — 90°
90°Crimp Braid/Solder Center Contact
Part Number Part Number Part Number
Gold over Ni 30Ȗin. Gold over Ni 50Ȗin. Gold over Ni
Plug D130357-1 D130357 D130357-4
Receptacle D130356-1 D130356 D130356-3
Plug Receptacle
Tooling for 90°Crimp Braid
Description Part Number
Hand Tool: 995-0001-761
Die Set: 995-2000-110
17,30 (.680)
REF
0,16 (.006)
REF
Ø 4,79(.189)
REF
17,53 (.690)
REF
5,10 (.200)
REF
Note: Ferrule not shown. Note: Ferrule not shown.
Dimensions are shown in mm (inch)
Dimensions subject to change
86
D Subminiature Combo D
Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — Straight
Straight Crimp Braid
Part Number
Gold Over Nickel
Part Number
50Ȗin.
Gold Over Copper A
max. B
max. D
min. RG Cable Number
Old New
Plug DM53740 DM53740-17 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U
Plug DM53740-1 DM53740-15 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Plug DM53740-35 18,80 (.739) 24,00 (.945) 1,70 (.067) RD316
Plug DM53740-3 DM53740-16 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U
Plug DM53740-5 DM53740-18 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58B/U
Receptacle DM53742 DM53742-18 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U
Receptacle DM53742-1 DM53742-16 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Receptacle DM53742-36 18,80 (.739) 24,00 (.945) 1,70 (.067) RD316
Receptacle DM53742-3 DM53742-17 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U
Receptacle DM53742-5 DM53742-19 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58B/U
For crimp tooling, see page 89.
Straight Solder Braid
Part Number
Gold Over Nickel
Part Number
50Ȗin.
Gold Over Copper A
max. B
max. D
min. RG Cable Number
Old New
Plug DM53740-5008 DM53740-5105 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U
Plug DM53740-5001 DM53740-5099 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Plug DM53740-5145 18,80 (.739) 24,00 (.945) 1,70 (.067) RD316
Plug DM53740-5002 DM53740-5104 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U
Plug DM53740-5005 DM53740-5101 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58/U
Plug (Short Type) DM53740-5000 DM53740-5100 17,00 (.670) 22,20 (.874) 1,14 (.045) 196/U 178B/U
Receptacle DM53742-5006 DM53742-5092 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/U 178B/U
Receptacle DM53742-5001 DM53742-5089 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Receptacle DM53742-5126 18,80 (.739) 24,00 (.945) 1,70 (.067) RD316
Receptacle DM53742-5002 DM53742-5091 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/U 180B/U
Receptacle DM53742-5004 DM53742-5086 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/U 58/U
Receptacle (Short Type) DM53742-5000 DM53742-5085 17,00 (.670) 22,20 (.874) 1,14 (.045) 196/U 178B/U
ReceptaclePlug
Plug Receptacle
Note: Dimensions include outer sleeve.
Dimensions are shown in mm (inch)
Dimensions subject to change 87
D Subminiature Combo D
Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — 90°
90°Crimp Braid
Note: Dimensions include outer sleeve.
Plug Receptacle
Part Number
Gold Over Nickel Part Number
50Ȗin. Gold Over Copper A
max. B
max. C D
±0,13 (.005) RG Cable Number
Old New
Plug DM53741 DM53741-12 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,14 (.045) 196/U 178B/U
Plug DM53741-1 DM53741-11 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,83 (.072) 187/U
188/U 179B/U
316B/U
Plug DM53741-3 DM53741-10 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U
Plug DM53741-4 DM53741-13 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58B/U
Receptacle DM53743-2 DM53743-18 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,14 (.045) 196/U 178B/U
Receptacle DM53743-3 DM53743-16 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,83 (.072) 187/U
188/U 179B/U
316B/U
Receptacle DM53743-5 DM53743-17 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U
Receptacle DM53743-6 DM53743-19 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58B/U
For crimp tooling, see page 89.
90°Solder Braid
Plug Receptacle
Part Number
Gold Over Nickel Part Number
50Ȗin. Gold Over Copper A
max. B
max. C D
min. RG Cable Number
Old New
Plug DM53741-5000 DM53741-5059 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,00 (.040) 196/U 178B/U
Plug DM53741-5001 DM53741-5062 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Plug DM53741-5003 DM53741-5063 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U
Plug DM53741-5004 DM53741-5060 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58/U
Receptacle DM53743-5000 DM53743-5073 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,00 (.040) 196/U 178B/U
Receptacle DM53743-5001 DM53743-5076 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Receptacle DM53743-5003 DM53743-5077 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/U 180B/U
Receptacle DM53743-5004 DM53743-5074 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/U 58B/U
Dimensions are shown in mm (inch)
Dimensions subject to change
88
D Subminiature Combo D
Insertion/Extraction Instructions for Coaxial, High Power and High Voltage Contacts
Insertion Tool
No insertion tool is required. The contact is easily
snapped in from the rear of the connector
manually.
Extraction Tool
The CET-C6B-2 tool extracts all coaxial, high
power and high voltage contacts (plug and
receptacle).
Description Part Number
CET-C6B-2 070064-0002
Operating Instructions
To extract the coaxial contact, hold the tool by the
body and insert the tip into the front of the contact
cavity until it bottoms and closes the coaxial
retaining ring. Holding the body in this position
CET-C6B-2
securely enough to keep coaxial retaining ring
closed, push the plunger; contact will be pushed
out of the rear of the assembly.
Insertion Instructions
Dimensions are shown in mm (inch)
Dimensions subject to change 89
D Subminiature Combo D
Coaxial Assembly Instructions
RG Cable Number
Straight Coaxial 90°Coaxial
N
±0,25 (.010) O
±0,25 (.010) P
±0,25 (.010) N
±0,25 (.010) O
±0,25 (.010) P
±0,25 (.010)
196/U, 178B/U, 187/U,
188/U, 179B/U, 316B/U 7,92 (.312) 6,35 (.250) 1,98 (.078) 9,52 (.375) 5,94 (.234) 1,57 (.062)
195/U, 180B/U,
58/U, 58B/U 9,52 (.375) 7,92 (.312) 1,98 (.078) 10,69 (.422) 7,92 (.312) 2,39 (.094)
Coaxial Cable Trim Dimensions
RG Cable Number Tool Part Number Description Closure
196/U, 178B/U 070051-0000 CCT-DM C
187/U, 179B/U,
188/U, 316B/U 070051-0000 CCT-DM B
195/U, 180B/U,
58/U, 58B/U 070051-0000 CCT-DM A
Crimp Tooling
Straight and 90°Coaxial Assembly
STEP 1 :
Slide the outer ring over the cable jacket. Trim the
cable as specified in the table of Coaxial Cable Trim
Dimensions (see this page). Insert the cable
dielectric and center conductor into the inside
diameter of the inner sleeve. Then solder the center
conductor to the coaxial center contact.
Straight and 90°Coaxial Assembly
STEP 2:
Slide the outer ring forward until it is flush with the
coaxial shell containing the braid between the outer
ring and the inner sleeve. For solder type coaxes,
soft solder the outer ring to the assembly through
the cross-drilled solder hold. For crimp type
coaxes, crimp with the appropriate tool in the area
defined.
Straight Coaxial 90°Coaxial
Straight Coaxial 90°Coaxial
Hand tool with integral die set for all coaxial straight
crimp braid.
Dimensions are shown in mm (inch)
Dimensions subject to change
90
20,93 - 20,42
(.824 - .804)
Ø AØ B
D Subminiature Combo D
Cable (Size 8) Loose Contacts — High Power — Solder
Plug
Part Number
Gold Over Nickel Part Number
50Ȗin. Gold over Ni Current Rating Wire
Size
DM53745-1 DM53745-28 40 A 8 AWG
DM53745-7 DM53745-27 20 A 12 AWG
DM53745-8 DM53745-25 10 A 16 AWG
Receptacle
Part Number
Gold Over Nickel Part Number
50Ȗin. Gold over Ni Current Rating Wire
Size
DM53744-1 DM53744-21 40 A 8 AWG
DM53744-6 DM53744-25 20 A 12 AWG
DM53744-7 DM53744-24 10 A 16 AWG
Plug
Recommended Wire Trim Length
Part Number
Gold Over Nickel Part Number
30Ȗin. Gold over Ni Part Number
50Ȗin. Gold over Ni XA
max. XB
max. Current
Rating Wire
Size
DM130338-4 DM130338 DM130338-1 4,60 (.181) 5,84 (.230) 40 A 8 AWG
DM130339-4 DM130339 DM130339-1 2,54 (.100) 5,54 (.218) 20 A 12 AWG
DM130340-4 DM130340 DM130340-1 1,07 (.067) 2,59 (.102) 10 A 16 AWG
Receptacle
Part Number
Gold Over Nickel Part Number
30Ȗin. Gold over Ni Part Number
50Ȗin. Gold over Ni XA
max. XB
max. Current
Rating Wire
Size
DM130341-4 DM130341 DM130341-1 4,60 (.181) 5,84 (.230) 40 A 8 AWG
DM130342-4 DM130342 DM130342-1 2,54 (.100) 5,54 (.218) 20 A 12 AWG
DM130343-4 DM130343 DM130343-1 1,07 (.067) 2,59 (.102) 10 A 16 AWG
High Power Crimp Tooling
Crimp Tool/Locator
Wire
Size Crimp
Tool Tool Setting
Number Locator
8 AWG M300-BT 6 TP968
10 AWG M300-BT 5 TP968
12/14 AWG M300-BT 1 TP968
16 AWG FT-8 6 TH554
18 AWG FT-8 5 TH554
Cable (Size 8) Loose Contacts — High Power — Crimp
M300-BT
Recommended Wire Trim Length
Dimensions are shown in mm (inch)
Dimensions subject to change 91
RING, RETAINER
INSULATOR
17,70 (.697)
REF
Receptacle
For tooling, see page 88.
18,64 (.734)
REF
RING, RETAINING
INSULATOR
D Subminiature Combo D
Cable (Size 8) Loose Contacts — High Voltage — Straight
Part Number Part Number Wire
SizeGold over Ni 50Ȗin. Gold
DM51157 DM51157-8 20 AWG
Part Number Part Number Wire
SizeGold over Ni 50Ȗin. Gold
DM51157-5000 DM51157-5005 20 AWG
RING, RETAINING
INSULATOR
17,70 (.697)
REF
For tooling, see page 88.
For tooling, see page 88.
Plug
Receptacle 19,41(.764)
REF
RING, RETAINING
INSULATOR
Part Number Part Number Wire
SizeGold over Ni 50Ȗin. Gold
DM51155 DM51155-7 20 AWG
For tooling, see page 88.
Cable (Size 8) Loose Contacts — High Voltage — 90°
Plug
Part Number Part Number Wire
SizeGold over Ni 50Ȗin. Gold
DM51155-5000 DM51155-5004 20 AWG
Dimensions are shown in mm (inch)
Dimensions subject to change
92
D Subminiature Combo D
PCB (Size 8) Loose Contacts — Coaxial 75 Ohm — Straight
Plug
Receptacle
PCB (Size 8) Loose Contacts — Coaxial 75 Ohm — 90°
Plug
Receptacle
17,78 (.700) Ø 0,51
(.020)
5,08
(.200)
0,25
(.010)
4,19
(.165)
18,00 (.708) Ø 0,61
(.024)
5,08
(.200)
0,25
(.010)
4,19
(.165)
20,32 (.800)
3,81
(.150)
10,26
(.404)
Ø 0,51
(.020)
5,08
(.200)
20,32 (.800)
3,81
(.150)
10,23
(.403)
Ø 0,61
(.024)
5,08
(.200)
Description Part Number
Plug DM130358-2
Description Part Number
Receptacle DM130346-2
Description Part Number
Plug DM130352-2
Description Part Number
Receptacle DM130321-3
Dimensions are shown in mm (inch)
Dimensions subject to change 93
D Subminiature Combo D
PCB (Size 8) Loose Contacts — High Power — Straight
Pin
Socket
PCB (Size 8) Loose Contacts — High Power —90°
Pin
Shell Size Part Number A
±0,25 (.010) B
±0,25 (.010) XC
±0,13 (.005)
DE, DA, DB, DC DM53745-104 10,62 (.418) 26,64 (1.049) 3,18 (.125)
DD DM53745-107 13,41 (.528) 26,64 (1.049) 3,18 (.125)
European Footprint DE, DA, DB, DC, DD DM53745-120 18,06 (.711) 11,00 (.433) 2,90 (.114)
18,23 ± 0,25
(.718 ± .010)
3,18 ± 0,13
(.125 ± .005)
18,19 ± 0,25
(.716 ± .010)
3,18 ± 0,13
(.125 ± .005)
Ø C
A
B
Ø C
B
A
Socket
Shell Size Part Number A
±0,25 (.010) B
±0,25 (.010) XC
±0,13 (.005)
DE, DA, DB, DC DM53744-92 13,41 (.528) 26,52 (1.044) 3,18 (.125)
DD DM53744-95 10,62 (.418) 26,52 (1.044) 3,18 (.125)
European Footprint DE, DA, DB, DC, DD DM53744-107 11,00 (.433) 17,93 (.706) 2,90 (.114)
Description Part Number
Pin DM53745-110
Description Part Number
Socket DM53744-98
Dimensions are shown in mm (inch)
Dimensions subject to change
94
D Subminiature Combo D
PCB (Size 8) Loose Contacts — High Voltage — Straight
Plug
Part Number
Gold over Ni Part Number
50Ȗin. Gold
DM51157-13 DM51157-14
15,95 (.628)
REF
5,94 - 5,44
(.234 - .214) 1,52 - 1,27
(.060 - .050)
Ø 3,68 - 3,53
(.145 -.139)
Ø 1,65 - 1,50
(.065 - .059)
Ø 5,72 - 5,33
(.225 - .210)
Ø 4,88 (.192)
MAX
CONTACT, PIN
INSULATOR
RING, RETAINING
16,76 (.660)
REF
6,48 - 6,22
(.255 - .245) 0,25 - 0,00
(.010 - .000)
Ø 1,65 - 1,50
(.065 - .059)
Ø 5,72 - 5,33
(.225 - .210)
Ø 4,88 (.192)
MAX
CONTACT, SKT
INSULATOR
RING, RETAINING
Receptacle
Part Number
Gold over Ni Part Number
50Ȗin. Gold
DM51155-12 DM51155-13
Dimensions are shown in mm (inch)
Dimensions subject to change 95
D Subminiature Combo D
PCB Guide Pin and Socket
Installs into any Combo D, Size 8 cavity. This guide
pin and socket system is ideal for blind mate
applications where space is limited.
PCB Guide Pin
Part Number Material Finish
DM53745-126 Copper Alloy Tin
29,21 (1.150)
REF
3,68 - 3,43
(.145 - .135)
Ø 5,66 - 5,41
(.223 - .213)
RING, RETAINING
Ø 3,25 - 3,10
(.128 - .122)
11,43 (.450)
REF
PCB Guide Socket
Part Number Material Finish
248-2967-000 Copper Alloy Tin
4,06 (.160)
16,28 (.641)
REF
CONNECTOR REAR
INSULATOR REF
Dimensions are shown in mm (inch)
Dimensions subject to change
96
D Subminiature Commercial Micro D — MDSM
Selection Index Page
Commercial Shielded Micro D
An Introduction ........................................................97
Locking/Latching Options ................................................98
Cable Assemblies — Pigtail...............................................98
PCB Connector 90°— Single or Stacked.....................................99
Cable Connectors (Unassembled Components) ...............................100
Crimp Contacts .......................................................100
Tooling..............................................................101
MDSM SSA Compatible Cable Assemblies ...................................102
Dimensions are shown in mm (inch)
Dimensions subject to change 97
D Subminiature Commercial Micro D — MDSM
MDSM is the commercial industry’s
smallest D-type connector for shielded
I/O wire-to-board applications.
Requiring less than 1/3 the area of a traditional
D Subminiature connector, MDSM is designed for
situations where space and EMI shielding are the
primary design drivers.
Unlike other micro connectors, MDSM’s rugged
construction and unique contact design combined
with a PdNi contact finish provide durability of
1 0,000 mating cycles. All of this comes in a sleek
package that includes a snap together shield can
and a slide over boot producing a cable assembly
with an overmolded look and a low assembled
cost. MDSM is an ideal solution for applications
where size, shielding, durability and aesthetics are
key design criteria.
Applications:
ɀElectronic Notepads
ɀVME Cards
ɀMultiplexors
ɀSerial Storage Devices
ɀComputer Workstations
ɀHand Held Devices
ɀBar Code Scanners
Product Features
ɀ1,27 (.050) Pitch / Saves Space
ɀFully Shielded / Reduces EMI
ɀCrimp Contacts / Applied Cost Savings
ɀAccessories Included / Fewer Part Numbers
ɀPdNi Plating / 10,000 Mating Cycles
ɀStacked Versions / Saves Horizontal Space
ɀSlide Over Boot / Results in Overmolded
Appearance
ɀChoice of Two Different Latching Options
(Thumbscrew / Push-Pull)
Contact Arrangements
(Face View of Pin Insert — Use Mirror Image for Socket Side)
Specifications
Temperature Rating 55°C to 125°C
Current Rating 1 A — temp dependent
Contact Resistance 20 mȉMax.
Insulation Resistance 5000 MȉMin.
Dielectric Withstanding Voltage 350 V at Sea Level
Durability 10,000 Mating Cycles
Shock / Vibration 50 G’s / 50 G’s
Wire Size 26 to 30 AWG
Materials and Finishes
Description Material Finish
Shell Steel Nickel
Shield Can Steel Tin
Cover Steel Tin
Insulator Thermoplastic, UL94 V-O None
Contacts Copper Alloy Gold flash over 30 microinches PdNi in mating area, Tin on balance
9 Contacts 15 Contacts 25 Contacts
Approvals & Certifications
ɀSSA (Serial Storage Architecture)
ɀU.L. File Number E8572
ɀISO 9001
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature C ommercial Micro D M DSM
Locking/Latching Options
Jackscrew Push/Pull
The jackscrew locking system is designed for applications which require a
secure connection. Utilize thumbscrews when the connectors are infrequently
unmated.
The push/pull latching system is designed for applications which require a
quick connect and disconnect. A spring retention mechanism latches to a post
on the board side to prevent unintentional unmatings.
Z10 Jackpost Z42 Jackpost
6,45
(.254)
#2-56 UNC
1,25 (.049)
3,18 (.125)
HE X
(ACR OS S F LATS )
¯ 3,25
(.128) 6,45
(.254)
#2-56 UNC
1,25 (.049)
0,52 (.020)
Note: Two Jackposts supplied with boardside connectors. Note: Two Jackposts supplied with boardside connectors.
Dimensions are shown in mm (inch)
Dimensions subject to change 99
D Subminiature Commercial Micro D — MDSM
PCB Connector 90°- Single
PCB Connector 90°- Stacked
No. of
Contacts Part Numbers - Single
Thumbscrew Push/Pull A
max. B C
max. D
max. E F
±0,05 (.002)
9 MDSM-9PE-Z10-VR25* MDSM-9E-Z42-VR25* 19,90 (.783) 14,35 (.565) 8,60 (.339) 9,00 (.354) 5,08 (.200) 10,24 (.403)
15 MDSM-15PE-Z10-VR22 MDSM-15PE-Z42-VR22 23,60 (.929) 18,16 (.715) 12,30 (.484) 12,90 (.508) 8,89 (.350) 14,01 (.551)
25 MDSM-25PE-Z10-VR17 MDSM-25PE-Z42-VR17 29,95 (1.179) 24,51 (.965) 18,65 (.734) 19,25 (.758) 15,24 (.600) 20,35 (.801)
*For use with SSA applications
No. of
Contacts Part Numbers - Stacked
Thumbscrew Push/Pull A
max. B C
max. D
max. E F
18 MDSM-18PE-Z10-VR25* MDSM-18PE-Z42-VR25* 19,90 (.783) 14,35 (.565) 8,60 (.339) 9,00 (.354) 5,08 (.200) 10,24 (.403)
30 MDSM-30PE-Z10-VR22 MDSM-30PE-Z42-VR22 23,50 (.925) 18,16 (.715) 12,30 (.484) 12,71 (.500) 8,89 (.350) 14,00 (.551)
*For use with SSA applications
Note: Standard jackpost offering recommended for use with .060 panel.
Dimensions are shown in mm (inch)
Dimensions subject to change
100
JACKSCREW
HOOD
CABLE
(CUSTOMER
SUPPLIED)
CRIMP CONTACTS
(PURCHASED
SEPARATELY)
INSULATOR
SHELL COVER
SHELL/SHIELD
ASSEMBLY
D Subminiature Commercial Micro D — MDSM
Cable Connectors (Unassembled Components)
Jackscrew
Cable connectors are supplied as complete kits
with insulator, hood, locking hardware, shell/
shield assembly, and cover, bulk packaged.
Push/Pull
Cable connectors are supplied as complete kits
with insulator, hood, shell/shield assembly, and
cover, bulk packaged.
Layout Jackscrew
Part Numbers Push/Pull
Part Numbers A
max. B
0,10 (.004) C
0,10 (.004) D
max. Max.
Cable Entry
9 MDSM-9SC-Z11-VS1 MDSM-9SC-Z24-VS1 19,90 (.783) 14,35 (.565) 9,45 (.372) 35,50 (1.40) 5,70 (.224)
15 MDSM-15SC-Z11-VS1 MDSM-15SC-Z24-VS1 23,70 (.993) 18,16 (.715) 13,17 (.519) 35,50 (1.40) 6,70 (.264)
25 MDSM-25SC-Z11-VS1 MDSM-25SC-Z24-VS1 30,05 (1.183) 24,51 (.965) 19,52 (.769) 42,50 (1.67) 7,90 (.311)
Note: VS1 refers to packaging multiples of 100.
Contacts are sold separately, see this page.
A
MAX
B
C
D
8,00
(.315)
5,60
(.220) 7,50
(.295)
MAX
25,00
(.984)
0,95 (.037)
15,00 (.591)
2,60 (.102)
Wire Trim Dimensions
Part Numbers
1,000 Piece Reel 10,000 Piece Reel
Socket MDS-S-TS MDS-S-RL
For crimp tooling, see page 101.
Crimp Contacts
HOOD
CABLE
(CUSTOMER
SUPPLIED)
CRIMP CONTACTS
(PURCHASED
SEPARATELY)
INSULATOR
SHELL COVER
SHELL/SHIELD
ASSEMBLY
Dimensions are shown in mm (inch)
Dimensions subject to change 101
D Subminiature Commercial Micro D — MDSM
Contact Crimping Tools
Contact Insertion/Extraction Tools
Shield Crimp Tooling
Parallel Action Low Volume Hand Tool
Part Number: CCTP-MDS
Note: For use with individual contacts (break off reel
MDS-S-TS or MDS-S-RL.
Hand Tool
Part Number: CCTR-MDS
Note: For use with reeled contacts - Part Number MDS-S-TS.
Semi-Automatic Crimper/Stripper
Part Number: ABT-620-MDS (Lease Only)
Note: For use with reeled contacts - Part Number MDS-S-RL.
For additional information, see page 275.
Crimp dies for SSA Cable will be offered by ITT Cannon.
Consult factory for details.
Jackpost Tool
Part Number: CIET-MDSM
Note: For use with Z10 Jackpost.
Insertion Tool
Part Number: 120090-0102
Note: Contacts cannot be removed from MDSM connectors.
ɀShield crimping requires four items; one
press, one locator, and one each of the two
dies listed below.
ɀLocator and Dies for Shield Termination
Ordered Separately
Part Numbers
Layout Locator Die
9 317-8666-013 274-8649-332/274-8649-333
15 317-8666-014 274-8649-334/274-8649-335
25 317-8666-016 274-8649-338/274-8649-339
Note: For assembly instructions and crimping information, refer
to Manual #MY-1/190.
Hand Press
Part Number: CHP-MDSM-SR
Pneumatic Press
Part Number: CPT-MDSM-SR
Dimensions are shown in mm (inch)
Dimensions subject to change
102
D Subminiature Commercial Micro D — MDSM
MDSM SSA Compatible Cable Assemblies
14,35
(.565)
P2
P1
19,89
(.783)
MAX
41,62
(1.639)
MAX
56,01
(2.205)
REF
X
5,71 (.225)
Part Number X
Meter (Feet) Tolerance
CA112104 0,50 (1.600) ±25,00 (1.000)
CA112104-1 1,00 (2.200) ±25,00 (1.000)
CA112104-2 3,00 (9.800) ±25,00 (1.000)
CA112104-3 5,00 (16.400) ±64,00 (2.500)
CA112104-4 10,00 (32.800) ±64,00 (2.500)
CA112104-5 20,00 (65.600) ±64,00 (2.500)
Note: For push/pull assemblies or other thumbscrews, please consult the factory.
Crimp dies for SSA applications will be offered by ITT Cannon. Consult factory for details.
ITT Cannon’s 9 position MDSM connectors have
been designed into the ANSI specification called
SSA, ‘‘Serial Storage Architecture,’’ as the external
I/O. SSA is a new serial interface for
interconnecting storage devices, storage
subsystems, servers and workstations. Storage
subsystems are increasing in function, availability,
density and performance. With this comes the
trend for them to become more complex and
ITT Cannon has the interconnect system which
meets SSA’s high performance requirements.
SSA is an architecture which allows these new
subsystems to be implemented more easily and at
lower costs than other new high speed parallel
interfaces. SSA permits the transfer of data at
progressively higher speeds - 20 MB/sec interface
currently available with 40 MB/sec becoming
available in 1997/98. ITT Cannon’s MDSM
connector not only functions at these high speeds,
but also brings to SSA smaller, less cumbersome
and higher reliability cables and connectors than
current options.
ITT Cannon is offering SSA compatable external
cable assemblies in six different lengths to meet
your needs. These assemblies consist of two
MDSM 9SC type cable connectors terminated to
SSA specified external cable.
Note: Cables shown with Z50 thumbscrews.
Dimensions are shown in mm (inch)
Dimensions subject to change 103
D Subminiature Commercial Micro D — MDSM
SSA External Cable Wiring Table
Transfer Impedance Performance
Requirements for External SSA Connections
Frequency MHz Value (dB-Ohm)(max.)
30 25
159 16
500 10
SSA External Cable Wire Cross Section (For Reference Only)
FILLER
CONDUCTOR
INSULATION
INNER SHIELD
JACKET
OUTER SHIELD
Ø 5,72
(.225)
Ø 1,57
(.062)
P1
1
2
3
4
5
6
7
8
9
P2
1
2
3
4
5
6
7
8
9
External Cable Pinouts
P1 P2
Pin Signal Name Pin Signal Name
2 LineOut4 LineIn
6 LineOut+9 LineIn+
4 LineIn2 LineOut
9 LineIn+6 LineOut+
Note: Pins 1, 3, 5, 7 and 8 are not connected.
8,51
(.335)
MAX
CONTACT #5
CONTACT #1
CONTACT #9
CONTACT #6
Pinout
Note: Shield connected to both shells.
Dimensions are shown in mm (inch)
Dimensions subject to change
104
D Subminiature Filter D
Selection Index Page
Filter D
An Introduction to D*JK and D*JT ........................................105
D*JK Filter Performance and Electrical Data ................................106
D*JT Filter Performance and Electrical Data ................................107
D*JK Connectors
Standard Footprint .318ɍor .283ɍɍ inches
90°PC Tails......................................................108
90°PC Tails, Metal Brackets..........................................112
European Footprint 10,2ɍor 9,4ɍɍ mm
90°PC Tails ......................................................110
90°PC Tails, Metal Brackets..........................................114
90°PC Tails, Plastic Brackets & Grounding Straps .........................116
90°PC Tails, Plastic Brackets .........................................118
Straight PC Tails...................................................120
D*JT Connectors
Solder Cup.........................................................122
Combo — High Power 90°.............................................124
Combo — High Power Straight..........................................126
Combo — High Power Solder Cup .......................................128
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Dimensions are shown in mm (inch)
Dimensions subject to change 105
D Subminiature Filter D
D*JK/D*JT
Filter connectors series D*JK and D*JT from
ITT Cannon especially designed for
commercial applications provide excellent
protection against EMI and RFI.
Using D Subminiature standard components a
cost-effective production can be achieved as well
as 100% compatibility with equivalent products
according to DIN 4 1652. D Subminiature standard
accessories can be used.
High quality tubular ceramic capacitors are
assembled onto the D*JK contacts and soldered to
contact and backshell while series D*JT
connectors apply planar array filters.
Applications:
ɀEMI/RFI Sensitive Electronics
ɀTest & Measurement Equipment
ɀComputer Equipment
ɀMedical Equipment
ɀTelecommunication Transmission
Product Features
ɀHF–tightness and mechanical stability by
closed backshell
ɀFree-stamped grounding fingers (pin
connector only)
ɀStraight and 90°solder pins (D*JK)
ɀSolder cups, straight and 90°solder pins
(D*JT)
ɀVersatile mounting possibilities (brackets,
captive nuts)
ɀContact finsh according to performance
class 2 (standard) or class 1
Mechanical Data
Coupling Friction, accessories
Polarization Keystone shape of shell
Termination PC tails, straight and 90°
Solder cups
Specifications
Temperature Range Per DIN IEC 68 Part 1 55°C to 125°C
Materials and Finishes
Description Material Finish
Shell Steel Tin
Insulator Thermoplastic, UL 94V-0 None
Contacts Copper Alloy Gold over Nickel
Dimensions are shown in mm (inch)
Dimensions subject to change
106
Voltage rating (working) 100 VDC
Current rating 5 A
Insulation resistance,
electrification time 30 s, temperature 25°C 5000 Mȉmin./100 V
Dielectric Withstanding Voltage (Sea Level)
500 micro amps max. charge/discharge 250 VDC
Filter Type C Capacitor
Filter Symbol per DIN
D Subminiature Filter D
D*JK Filter Performance
D*JK Electrical Data
Filter designation 54321
Capacitance, type
at 1 KHz, 0,1 Vrms, 25°C 1500 pF 1000 pF 680 pF 470 pF 330 pF
Frequency
MHz Attenuation
db min. Attenuation
db min. Attenuation
db min. Attenuation
db min. Attenuation
db min.
103————
30 20 14 10 7 2
100 31 27 22 18 9
300 39 35 30 27 18
1000 47 42 37 32 28
2000 51 46 42 36 31
Attenuation per MIL-STD-220 at 25°C with no applied voltage or current
Dimensions are shown in mm (inch)
Dimensions subject to change 107
D Subminiature Filter D
D*JT Filter Performance
D*JT Electrical Data
Voltage rating (working) 200 VDC/120 Vrms, 400 Hz
Current rating 5 A (Size 20 contacts), 30 A (Size 8 contacts)
Insulation resistance,
electrification time 30 s, temperature 25°C 10,000 Mȉmin./100 V
Dielectric Withstanding Voltage (Sea Level)
500 micro amps max. charge/discharge 500 VDC
Filter type C Capacitor
Filter symbol per DIN
Filter designation 9546123
Capacitance, type
at 1 KHz, 0,1 Vrms, 25°C 47000 pF 5000 pF 2000 pF 1500 pF 1000 pF 500 pF 250 pF
Frequency
MHz Attenuation
db min. Attenuation
db min. Attenuation
db min. Attenuation
db min. Attenuation
db min. Attenuation
db min. Attenuation
db min.
5301163
103716107521
100 50 35 27 23 20 16 14
1000 45 54 48 46 42 37 35
2000 64 60 60 60 60
5000 64 64 64 64 64
Attenuation per MIL-STD-220 at 25°C with no applied voltage or current
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC
DE 9 DEJK9P*-1U0N DEJKE9P*-1U0N
DA 15 DAJK15P*-1U0N DAJKE15P*-1U0N
DB 25 DBJK25P*-1U0N DBJKE25P*-1U0N
DC 37 DCJK37P*-1U0N DCJKE37P*-1U0N
* Insert filter designator. Example: DEJK9P4-1U0N (For 1000 pF Filter Capacitance)
Note: For performance class 1 add -A190. Example: DEJK9P1-1U0N-A190
D Subminiature Filter D
D*JK — 90°PC Tails — Standard Footprint .318ɍor .283 inch ɍɍ
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,37 (.015) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
2,84 (.112)
WF
7,19 (.283)
3,50 (.138)
L
108
Dimensions are shown in mm (inch)
Dimensions subject to change 109
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC
DE 9 DEJK9S*-1U0N DEJKE9S*-1U0N
DA 15 DAJK15S*-1U0N DAJKE15S*-1U0N
DB 25 DBJK25S*-1U0N DBJKE25S*-1U0N
DC 37 DCJK37S*-1U0N DCJKE37S*-1U0N
* Insert filter designator. Example: DEJK9S4-1U0N (for 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9S1-1U0N-A190
D Subminiature Filter D
D*JK — 90°PC Tails — Standard Footprint .318ɍor .283 inch ɍɍ
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
2,84 (.112)
WF
7,19 (.283)
3,50 (.138)
L
Dimensions are shown in mm (inch)
Dimensions subject to change
110
D Subminiature Filter D
D*JK — 90°PC Tails — European Footprint 10,2ɍor 9,4 mmɍɍ
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware options (European),
see page 227.
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
DE 9 DEJK9P*-1A0N DEJKE9P*-1A0N DEJKX9P*-1A0N
DA 15 DAJK15P*-1A0N DAJKE15P*-1A0N DAJKX15P*-1A0N
DB 25 DBJK25P*-1A0N DBJKE25P*-1A0N DBJKX25P*-1A0N
DC 37 DCJK37P*-1A0N DCJKE37P*-1A0N DCJKX37P*-1A0N
* Insert filter designator. Example: DEJK9P4-1A0N (For 1000 pF Filter Capacitance)
Modifier: For performance class 1 add -A190. Example: DEJK9P1-1A0N-A190
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,37 (.015) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
D
E
BØ 3,05 (.120)
A
10°
159
8
1
C
Ø 0,60 (.024)
F
W
9,40
(.370)
2,54 (.100) 4,73 (.186)
L
Dimensions are shown in mm (inch)
Dimensions subject to change 111
D Subminiature Filter D
D*JK — 90°PC Tails — European Footprint 10,2ɍor 9,4 mmɍɍ
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware options (European),
see page 227.
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
DE 9 DEJK9S*-1A0N DEJKE9S*-1A0N DEJKX9S*-1A0N
DA 15 DAJK15S*-1A0N DAJKE15S*-1A0N DAJKX15S*-1A0N
DB 25 DBJK25S*-1A0N DBJKE25S*-1A0N DBJKX25S*-1A0N
DC 37 DCJK37S*-1A0N DCJKE37S*-1A0N DCJKX37S*-1A0N
* Insert filter designator. Example: DEJK9S4-1A0N (for 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9S1-1A0N-A190
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
F
W
2,54 (.100)
9,40
(.370)
4,73 (.186)
L
Dimensions are shown in mm (inch)
Dimensions subject to change
112
D Subminiature Filter D
D*JK — 90°PC Tails and Metal Brackets — Standard Footprint .318ɍor .283 inchɍɍ
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor pushfit/boardlock configuration,
see page 225.
Part Numbers
Shell Size Layout Bracket,
#4-40 Nut
Bracket,
#4-40 Nut,
Boardlock
DE 9 DEJK9P*-1U7N DEJK9P*-1U7N-146
DA 15 DAJK15P*-1U7N DAJK15P*-1U7N-146
DB 25 DBJK25P*-1U7N DBJK25P*-1U7N-146
DC 37 DCJK37P*-1U7N DCJK37P*-1U7N-146
Insert filter designator *. Example: DEJK9P4-1U7N-146 (For 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9P4-1U7N-A190-146
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
Boardlock removed for clarity
BRACKET,
METAL
BUSHING
2,84 (.112) 3,50 (.138)
7,19 (.283)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change 113
D Subminiature Filter D
D*JK — 90°PC Tails and Metal Brackets — Standard Footprint .318ɍor .283 inchɍɍ
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor pushfit/boardlock configuration,
see page 225.
Part Numbers
Shell Size Layout Bracket,
#4-40 Nut
Bracket,
#4-40 Nut,
Boardlock
DE 9 DEJK9S*-1U7N DEJK9S*-1U7N-146
DA 15 DAJK15S*-1U7N DAJK15S*-1U7N-146
DB 25 DBJK25S*-1U7N DBJK25S*-1U7N-146
DC 37 DCJK37S*-1U7N DCJK37S*-1U7N-146
Insert filter designator *. Example DEJK9S4-1U7N-146 (For 1000 pF Filter Capacitance)
Note: For performance class 1, add -A190. Example: DEJK9S4-1U7N-A190-146
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
15
8
9
1
BOARDLOCK
0,60 (.024)
D
E
B
C
A
10°
2,89 (.114)
BRACKET,
METAL
BUSHING
2,84 (.112) 3,50 (.138)
7,19 (.283)
WF
L
Boardlock removed for clarity
Dimensions are shown in mm (inch)
Dimensions subject to change
114
D Subminiature Filter D
D*JK — 90°PC Tails and Metal Brackets — European Footprint 10,2ɍor 9,4 mmɍɍ
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Part Numbers
Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC Post
M3
DEJK9P*-1AFN DEJK9P*-1A7N DEJK9P*-1A9N DEJK9P*-1A8N DEJK9P*-1AHN
DAJK15P*-1AFN DAJK15P*-1A7N DAJK15P*-1A9N DAJK15P*-1A8N DAJK15P*-1AHN
DBJK25P*-1AFN DBJK25P*-1A7N DBJK25P*-1A9N DBJK25P*-1A8N DBJK25P*-1AHN
DCJK37P*-1AFN DCJK37P*-1A7N DCJK37P*-1A9N DCJK37P*-1A8N DCJK37P*-1AHN
* Insert filter designator. Example: DEJK9P4-1A7N (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9P1-1AFN-A190
For pushfit/boardlocks add -146. Example: DEJK9P1-1AFN-A190-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
Boardlock removed for clarity
A
C
B
D
E
1,00 (.039)
Ø 0,60 (.024)
10°
8
1
15
9
BOARDLOCK
2,89 (.114)
BRACKET,
METAL
BUSHING
3,70 (.146)
9,40 (.370)
2,54 (.100)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change 115
D Subminiature Filter D
D*JK — 90°PC Tails and Metal Brackets — European Footprint 10,2ɍor 9,4 mmɍɍ
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Part Numbers
Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC Post
M3
DEJK9S*-1AFN DEJK9S*-1A7N DEJK9S*-1A9N DEJK9S*-1A8N DEJK9S*-1AHN
DAJK15S*-1AFN DAJK15S*-1A7N DAJK15S*-1A9N DAJK15S*-1A8N DAJK15S*-1AHN
DBJK25S*-1AFN DBJK25S*-1A7N DBJK25S*-1A9N DBJK25S*-1A8N DBJK25S*-1AHN
DCJK37S*-1AFN DCJK37S*-1A7N DCJK37S*-1A9N DCJK37S*-1A8N DCJK37S*-1AHN
* Insert filter designator. Example: DEJK9S4-1A7N (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9S1-1AFN-A190
For pushfit/boardlocks add -146. Example: DEJK9S1-1AFN-A190-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Boardlock removed for clarity
Engaging Face
A
C
B
D
E
1,00 (.039)
Ø 0,60 (.024)
10°
81
15 9
BOARDLOCK
2,89 (.114)
BRACKET,
METAL
BUSHING
3,70 (.146)
9,40 (.370)
2,54 (.100)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change
116
D Subminiature Filter D
D*JK — 90°PC Tails & Plastic Brackets with Grounding Straps — European Footprint 10,2ɍor 9,4 mmɍɍ
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Part Numbers
Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC Post
M3
DEJK9P*-1ADN DEJK9P*-1AWN DEJK9P*-1AVN DEJK9P*-1AJN DEJK9P*-1AGN
DAJK15P*-1ADN DAJK15P*-1AWN DAJK15P*-1AVN DAJK15P*-1AJN DAJK15P*-1AGN
DBJK25P*-1ADN DBJK25P*-1AWN DBJK25P*-1AVN DBJK25P*-1AJN DBJK25P*-1AGN
DCJK37P*-1ADN DCJK37P*-1AWN DCJK37P*-1AVN DCJK37P*-1AJN DCJK37P*-1AGN
* Insert filter designator. Example: DEJK9P4-1AWN (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9P1-1ADN-A190
For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146
Engaging Face
A
C
B
D
E
1,00 (.039)
Ø 0,60 (.024)
10°
81
15
9
BRACKET, PLASTIC,
WITH GROUNDING
STRAP 3,70 (.146)
9,40 (.370)
2,54 (.100)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change 117
D Subminiature Filter D
D*JK — 90°PC Tails & Plastic Brackets with Grounding Straps — European Footprint 10,2ɍor 9,4 mmɍɍ
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Desginator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Part Numbers
Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC Post
M3
DEJK9S*-1ADN DEJK9S*-1AWN DEJK9S*-1AVN DEJK9S*-1AJN DEJK9S*-1AGN
DAJK15S*-1ADN DAJK15S*-1AWN DAJK15S*-1AVN DAJK15S*-1AJN DAJK15S*-1AGN
DBJK25S*-1ADN DBJK25S*-1AWN DBJK25S*-1AVN DBJK25S*-1AJN DBJK25S*-1AGN
DCJK37S*-1ADN DCJK37S*-1AWN DCJK37S*-1AVN DCJK37S*-1AJN DCJK37S*-1AGN
* Insert filter designator. Example: DEJK9S4-1AWN (For 1000 pF capacitance)
Notes: For performance class 1 add -A190. Example: DEJKS1-1ADN-A190
For pushfit/boardlocks add -146. Example: DEJK9P1-1ADN-A190-146
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Engaging Face
A
C
B
D
E
1,00 (.039)
Ø 0,60 (.024)
10°
81
15 9
BRACKET, PLASTIC,
WITH GROUNDING
STRAP 3,70 (.146)
9,40 (.370)
2,54 (.100)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change
118
D Subminiature Filter D
D*JK — 90°PC Tails & Plastic Brackets — European Footprint 10,2ɍor 9,4 mmɍɍ
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Part Numbers
Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC Post
M3
DEJK9P*-1A5N DEJK9P*-1AUN DEJK9P*-1ATN DEJK9P*-1A6N DEJK9P*-1APN
DAJK15P*-1A5N DAJK15P*-1AUN DAJK15P*-1ATN DAJK15P*-1A6N DAJK15P*-1APN
DBJK25P*-1A5N DBJK25P*-1AUN DBJK25P*-1ATN DBJK25P*-1A6N DBJK25P*-1APN
DCJK37P*-1A5N DCJK37P*-1AUN DCJK37P*-1ATN DCJK37P*-1A6N DCJK37P*-1APN
* Insert filter designator. Example: DEJK9P4-1A5N (For 1000 pF filter capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9P1-1A5N-A190
For pushfit/boardlocks add-146. Example: DEJK9P1-1A5N-A190-146
Engaging Face
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0.13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,37 (.015) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
A
C
B
D
E
1,00 (.039)
Ø 0,60 (.024)
10°
81
15
9
BRACKET,
PLASTIC 3,70 (.146)
9,40 (.370)
2,54 (.100)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change 119
D Subminiature Filter D
D*JK — 90°PC Tails and Plastic Brackets — European Footprint 10,2ɍor 9,4 mmɍɍ
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Part Numbers
Bushing with
Through Hole Captive Nut
#4-40 UNC Captive Nut
M3 Post
#4-40 UNC Post
M3
DEJK9S*-1A5N DEJK9S*-1AUN DEJK9S*-1ATN DEJK9S*-1A6N DEJK9S*-1APN
DAJK15S*-1A5N DAJK15S*-1AUN DAJK15S*-1ATN DAJK15S*-1A6N DAJK15S*-1APN
DBJK25S*-1A5N DBJK25S*-1AUN DBJK25S*-1ATN DBJK25S*-1A6N DBJK25S*-1APN
DCJK37S*-1A5N DCJK37S*-1AUN DCJK37S*-1ATN DCJK37S*-1A6N DCJK37S*-1APN
* Insert filter designator. Example: DEJK9S4-1A5N (for 1000 pF filter capacitance)
Notes: For performance class 1 add -A190. Example: DEJK9S1-1A5N-A190
For pushfit/boardlocks add -146. Example: DEJK9S1-1A5N-A190-146
Engaging Face
A
C
B
D
E
1,00 (.039)
Ø 0,60 (.024)
10°
81
15 9
BRACKET,
PLASTIC 3,70 (.146)
9,40 (.370)
2,54 (.100)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change
120
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3 Pushfit/Boardlock
#4-40 UNC Pushfit/Boardlock
M3
DE 9 DEJK9P*-OL4 DEJKE9P*-OL4 DEJKX9P*-OL4 DEJKE9P*-OL4-146 DEJKX9P*-OL4-146
DA 15 DAJK15P*-OL4 DAJKE15P*-OL4 DAJKX15P*-OL4 DAJKE15P*-OL4-146 DAJKX15P*-OL4-146
DB 25 DBJK25P*-OL4 DBJKE25P*-OL4 DBJKX25P*-OL4 DBJKE25P*-OL4-146 DBJKX25P*-OL4-146
DC 37 DCJK37P*-OL4 DCJKE37P*-OL4 DCJKX37P*-OL4 DCJKE37P*-OL4-146 DCJKX37P*-OL4-146
DD 50 DDJK50P*-OL4 DDJKE50P*-OL4 DDJKX50P*-OL4 DDJKE50P*-OL4-146 DDJKX50P*-OL4-146
* Insert filter designator. Example: DEJK9P4-0L4 (for 1000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DEJK9P1-0L4-A190
D Subminiature Filter D
D*JK — Straight P.C. Tails
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor Hardware views (European),
see page 227.
ɀFor pushfit/boardlock configuration,
see page 225.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.439) 15,37 (.607) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Engaging Face DD Configuration
A
C
B
ED
8
1
Ø 3,05 (.120)
10°
915
5,68 (.224)
2,84 (.112)
L
2,84 (.112)
WF
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Ø 0,60 (.024)
11,70 ± 0,20
(.461 ± .008)
Dimensions are shown in mm (inch)
Dimensions subject to change 121
Part Numbers
Shell Size Layout Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3 Pushfit/Boardlock
#4-40 UNC Pushfit/Boardlock
M3
DE 9 DEJK9S*-OL4 DEJKE9S*-OL4 DEJKX9S*-OL4 DEJKE9S*-OL4-146 DEJKX9S*-OL4-146
DA 15 DAJK15S*-OL4 DAJKE15S*-OL4 DAJKX15S*-OL4 DAJKE15S*-OL4-146 DAJKX15S*-OL4-146
DB 25 DBJK25S*-OL4 DBJKE25S*-OL4 DBJKX25S*-OL4 DBJKE25S*-OL4-146 DBJKX25S*-OL4-146
DC 37 DCJK37S*-OL4 DCJKE37S*-OL4 DCJKX37S*-OL4 DCJKE37S*-OL4-146 DCJKX37S*-OL4-146
* Insert filter designator. Example: DEJK9S4-OL4 (for 1000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DEJK9S1-OL4-A190
D Subminiature Filter D
D*JK — Straight P.C. Tails
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor Hardware views (European),
see page 227.
ɀFor pushfit/boardlock configuration,
see page 225.
Filter Designator* Filter Capacitance
1 330 pF
2 470 pF
3 680 pF
4 1000 pF
5 1500 pF
For electrical data, see page 106.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
A
C
B
ED
Ø 3,05 (.120)
10°
81
15 9
Ø 0,60 (.024)
11,70 ± 0,20
(.461 ± .008)
2,84 (.112)
WF
L
Dimensions are shown in mm (inch)
Dimensions subject to change
122
Part Numbers
Shell Size Layout Through Hole Clinch Nut #4-40 UNC Clinch Nut M3
DE 9 DEJT9P* DEJTE9P* DEJTX9P*
DA 15 DAJT15P* DAJTE15P* DAJTX15P*
DB 25 DBJT25P* DBJTE25P* DBJTX25P*
DC 37 DCJT37P* DCJTE37P* DCJTX37P*
* Insert filter designator. Example: DCJT37P4 (for 2000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DCJT37P1-A190
D Subminiature Filter D
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Filter Designator* Filter Capacitance
1 1000 pF
2 500 pF
3 250 pF
4 2000 pF
5 5000 pF
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0.13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,37 (.015) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Engaging Face
D*JT — Solder Cup
9,80 (.386)
MAX
2,84 (.112)
F
W
L
Dimensions are shown in mm (inch)
Dimensions subject to change 123
Part Numbers
Shell Size Layout Through Hole Clinch Nut #4-40 UNC Clinch Nut M3
DE 9 DEJT9S* DEJTE9S* DEJTX9S*
DA 15 DAJT15S* DAJTE15S* DAJTX15S*
DB 25 DBJT25S* DBJTE25S* DBJTX25S*
DC 37 DCJT37S* DCJTE37S* DCJTX37S*
* Insert filter designator. Example: DEJT9S4 (for 2000 pF filter capacitance)
Note: For performance class 1 add -A190. Example: DEJT9S1-A190
D Subminiature Filter D
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Filter Designator* Filter Capacitance
1 1000 pF
2 500 pF
3 250 pF
4 2000 pF
5 5000 pF
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
D*JT — Solder Cup
10°
D
E
C
B
A
Ø 3,05 (.120)
POSITION 1
9,80 (.386)
MAX
2,84 (.112)
F
W
L
Dimensions are shown in mm (inch)
Dimensions subject to change
124
D Subminiature Filter D
D*JT Combo — High Power 90°
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 250.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
A
C
B
ED
A1 A3
Ø 3,05 (.120)
Ø 2,60 (.102)
10°
Part Numbers
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3W3P1-1A0N DAJTE3W3P1-1A0N DAJTX3W3P1-1A0N
1500 pF DAJT3W3P6-1A0N DAJTE3W3P6-1A0N DAJTX3W3P6-1A0N
5000 pF DAJT3W3P5-1A0N DAJTE3W3P5-1A0N DAJTX3W3P5-1A0N
47000 pF DAJT3W3P9-1A0N DAJTE3W3P9-1A0N DAJTX3W3P9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-1A0N-A190
Part Numbers — Keyed Configuration
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3WK3P1-1A0N DAJTE3WK3P1-1A0N DAJTX3W3KP1-1A0N
1500 pF DAJT3WK3P6-1A0N DAJTE3WK3P6-1A0N DAJTX3WK3P6-1A0N
5000 pF DAJT3WK3P5-1A0N DAJTE3WK3P5-1A0N DAJTX3WK3P5-1A0N
47000 pF DAJT3WK3P9-1A0N DAJTE3WK3P9-1A0N DAJTX3WK3P9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-1A0N-A190
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) L
±0,25 (.010)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
Engaging Face Keyed Configuration
Engaging Face
12,30
(.484)
F
W
L
A
C
B
ED
A1 A3
Ø 3,05 (.120)
Ø 2,60 (.102)
10°
Dimensions are shown in mm (inch)
Dimensions subject to change 125
D Subminiature Filter D
D*JT Combo — High Power 90°
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 252.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Part Numbers
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3W3S1-1A0N DAJTE3W3S1-1A0N DAJTX3W3S1-1A0N
1500 pF DAJT3W3S6-1A0N DAJTE3W3S6-1A0N DAJTX3W3S6-1A0N
5000 pF DAJT3W3S5-1AON DAJTE3W3S5-1AON DAJTX3W3S5-1AON
47000 pF DAJT3W3S9-1A0N DAJTE3W3S9-1A0N DAJTX3W3S9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3W3S9-1AON-A190
Part Numbers — Keyed Configuration
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3WK3S1-1A0N DAJTE3WK3S1-1A0N DAJTX3WK3S1-1A0N
1500 pF DAJT3WK3S6-1A0N DAJTE3WK3S6-1A0N DAJTX3WK3S6-1A0N
5000 pF DAJT3WK3S5-1AON DAJTE3WK3S5-1AON DAJTX3WK3S5-1AON
47000pF DAJT3WK3S9-1A0N DAJTE3WK3S9-1A0N DAJTX3WK3S9-1A0N
Note: For performance class 1 add -A190. Example: DAJT3WK3S9-1AON-A190
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face Keyed Configuration
Engaging Face
A1
A3
E
C
A
B
D
10°Ø 3,05 (.120)
2,60 (.102)
A1
A3
E
C
A
B
D
10°Ø 3,05 (.120)
2,60 (.102)
LWF
12,30
(.484)
Dimensions are shown in mm (inch)
Dimensions subject to change
126
D Subminiature Filter D
D*JT Combo — High Power Straight
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 254.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Part Numbers
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3W3P1-OL4 DAJTE3W3P1-OL4 DAJTX3W3P1-OL4
1500 pF DAJT3W3P6-OL4 DAJTE3W3P6-OL4 DAJTX3W3P6-OL4
5000 pF DAJT3W3P5-OL4 DAJTE3W3P5-OL4 DAJTX3W3P5-OL4
47000 pF DAJT3W3P9-OL4 DAJTE3W3P9-OL4 DAJTX3W3P9-OL4
Note: For performance class 1 add -A190. Example: DAJT3W3P6-OL4-A190
Part Numbers — Keyed Configuration
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3WK3P1-OL4 DAJTE3WK3P1-OL4 DAJTX3WK3P1-OL4
1500 pF DAJT3WK3P6-OL4 DAJTE3WK3P6-OL4 DAJTX3WK3P6-OL4
5000 pF DAJT3WK3P5-OL4 DAJTE3WK3P5-OL4 DAJTX3WK3P5-OL4
47000 pF DAJT3WK3P9-OL4 DAJTE3WK3P9-OL4 DAJTX3WK3P9-OL4
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-OL4-A190
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) L
±0,25 (.010)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
Engaging Face
A
C
B
ED
Ø 3,05 (.120)
10°
A1 A3
F
W
L
Keyed Configuration
Engaging Face
A
C
B
ED
Ø 3,05 (.120)
10°
A1 A3
11,60 ± 0,20
(.457 ± .008)
Ø 2,60 (.102)
Dimensions are shown in mm (inch)
Dimensions subject to change 127
D Subminiature Filter D
D*JT Combo — High Power Straight
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 257.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Part Numbers
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3W3S1-OL4 DAJTE3W3S1-OL4 DAJTX3W3S1-OL4
1500 pF DAJT3W3S6-OL4 DAJTE3W3S6-OL4 DAJTX3W3S6-OL4
5000 pF DAJT3W3S5-OL4 DAJTE3W3S5-OL4 DAJTX3W3S5-OL4
47000 pF DAJT3W3S9-OL4 DAJTE3W3S9-OL4 DAJTX3W3S9-OL4
Note: For performance class 1 add -A190. Example: DAJT3W3S6-OL4-A190
Part Numbers — Keyed Configuration
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3WK3S1-OL4 DAJTE3WK3S1-OL4 DAJTX3WK3S1-OL4
1500 pF DAJT3WK3S6-OL4 DAJTE3WK3S6-OL4 DAJTX3WK3S6-OL4
5000 pF DAJT3WK3S5-OL4 DAJTE3WK3S5-OL4 DAJTX3WK3S5-OL4
47000 pF DAJT3WK3S9-OL4 DAJTE3WK3S9-OL4 DAJTX3WK3S9-OL4
Note: For performance class 1 add -A190. Example: DAJT3WK3S-OL4-A190
For electrical data, see page 107.
LWF
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face Keyed Configuration
Engaging Face
A1
A3
E
C
A
B
D
10°Ø 3,05 (.120)
11,70 ± 0,20
(.461 ± .008)
Ø 2,60 (.102)
A1
A3
E
C
A
B
D
10°Ø 3,05 (.120)
Dimensions are shown in mm (inch)
Dimensions subject to change
128
D Subminiature Filter D
D*JT Combo — High Power Solder Cup
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Part Numbers
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3W3P1 DAJTE3W3P1 DAJTX3W3P1
1500 pF DAJT3W3P6 DAJTE3W3P6 DAJTX3W3P6
5000 pF DAJT3W3P5 DAJTE3W3P5 DAJTX3W3P5
47000 pF DAJT3W3P9 DAJTE3W3P9 DAJTX3W3P9
Note: For performance class 1 add -A190. Example: DAJT3W3P6-A190
Part Numbers – Keyed Configuration
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3WK3P1 DAJTE3WK3P1 DAJTX3WK3P1
1500 pF DAJT3WK3P6 DAJTE3WK3P6 DAJTX3WK3P6
5000 pF DAJT3WK3P5 DAJTE3WK3P5 DAJTX3WK3P5
47000 pF DAJT3WK3P9 DAJTE3WK3P9 DAJTX3WK3P9
Note: For performance class 1 add -A190. Example: DAJT3WK3P6-A190
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) L
±0,25 (.010)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
Engaging Face Keyed Configuration
Engaging Face
A
C
B
ED
A1 A3
10°Ø 3,05
(.120)
A
C
B
ED
A1 A3
10°Ø 3,05
(.120)
LWF
Ø 3,63 (.143)
15,80 ± 0,50
(.622 ± .011)
Dimensions are shown in mm (inch)
Dimensions subject to change 129
D Subminiature Filter D
D*JT Combo — High Power Solder Cup
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Part Numbers
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3W3S1 DAJTE3W3S1 DAJTX3W3S1
1500 pF DAJT3W3S6 DAJTE3W3S6 DAJTX3W3S6
5000 pF DAJT3W3S5 DAJTE3W3S5 DAJTX3W3S5
47000 pF DAJT3W3S9 DAJTE3W3S9 DAJTX3W3S9
Note: For performance class 1 add -A190. Example: DAJT3W3S6-A190
Part Numbers — Keyed Configuration
Filter
Capacitance Through Hole Clinch Nut
#4-40 UNC Clinch Nut
M3
1000 pF DAJT3WK3S1 DAJTE3WK3S1 DAJTX3WK3S1
1500 pF DAJT3WK3S6 DAJTE3WK3S6 DAJTX3WK3S6
5000 pF DAJT3WK3S5 DAJTE3WK3S5 DAJTX3WK3S5
47000 pF DAJT3WK3S9 DAJTE3WK3S9 DAJTX3WK3S9
Note: For performance class 1 add -A190. Example: DAJT3WK3S6-A190
For electrical data, see page 107.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
LWF
Keyed Configuration
Engaging Face
A1
A3
E
C
A
B
D
10°Ø 3,05 (.120)
Ø 3,63 (.143)
15,90 ± 0,50
(.626 ± .011)
A1
A3
E
C
A
B
D
10°Ø 3,05 (.120)
Dimensions are shown in mm (inch)
Dimensions subject to change
130
D Subminiature Military/High Reliability
Selection Index Page
Military/High Reliability
An Introduction.......................................................130
Standard Layout
90°PC Tail with Plastic Bracket .........................................132
90°PC Tail.........................................................134
Straight PC Tail .....................................................136
Wrap Post Connector .................................................138
Solder Cup Connector ................................................140
MIL-C-24308 Cross Reference ...........................................142
MIL-C-39028 Crimp Contacts ............................................143
HE501/D*M Cross Reference ............................................144
MIL-24308 Test Data ..................................................145
Combo DPCB Connectors with Coaxial 75 Ohm Contacts (50 Ohm Option)
Coaxial 90°(Sizes DE-DC) .............................................146
Coaxial 90°(Size DD).................................................148
Coaxial Straight (Sizes DE-DC) ..........................................150
Coaxial Straight (Size DD)..............................................152
Combo DPCB Connectors with High Power Contacts
40 A High Power 90°(Sizes DE-DC)......................................154
40 A High Power 90°(Size DD) .........................................156
40 A High Power Straight (Sizes DE-DC)...................................158
40 A High Power Straight (Size DD) ......................................160
Combo DPCB Connectors with High Voltage Contacts
High Voltage Straight (Sizes DE-DC)......................................162
High Voltage Straight (Size DD)..........................................164
Combo DPCB Connectors with (Size 20) Signal Contacts Only
Cable Solder Cup (Sizes DE-DD).........................................166
Dimensions are shown in mm (inch)
Dimensions subject to change 131
D Subminiature Military/High Reliability
ITT Cannon Military/High Reliability D
Subminiature connectors are used in many
applications, including aerospace,
transportation, communication systems,
information systems and test equipment. Being the
inventor of the D Subminiature connector,
ITT Cannon is able to use its extensive design
expertise and high quality manufacturing
processes to insure the optimum performance and
reliability.
The D Subminiature connectors with fixed
contacts in solder cup, straight and 90°PC contact
terminations are qualified to MIL-C-24308 (see
cross reference, pages 142-143). These high-
reliability D Subminiature connectors are the finest
quality connectors available at the most
competitive prices in the market.
Applications:
ɀAerospace
ɀTransportation
ɀCommunication Systems
ɀInformation Systems
ɀTest Equipment
Product Features
Materials and Finishes
Description Material Finish/Treatment
Shell Steel Yellow Chromate over Zinc
(Cadmium available upon request; order code -A101)
Insulator Polyester, UL 94V-0, Color: Green None
Contacts (Military) Copper Alloy 50 microinches of Gold over Nickel in mating area, Gold over Nickel on balance
Contacts (Commercial) Copper Alloy Gold over Nickel on mating area, Tin on balance
Dual Float Mount Hardware Stainless Steel Passivated
Clinch Nut Hardware Stainless Steel with plastic insert Passivated
Standoff Stainless Steel Passivated
Plastic Bracket Thermoplastic, UL 94V-0 None
Metal Bracket Steel Zinc (Tin if boardlocks are attached)
Coaxial/High Power/High Voltage Contact Assemblies
Contacts and Outer Shells Copper Alloy Gold over Nickel
Ring, Retaining Copper Alloy Nickel
Insulator (Coaxial Only) Teflon None
Insulator (High Voltage Only) Thermoplastic None
Specifications
ɀSuitable for a variety of cable and printed
circuit board options ɀSolder cup version accommodates wire size
20 AWG maximum
Temperature Rating 55°C to 125°C
Signal Contact Current Rating 7.5 A current capacity
Signal Contact Resistance 55 millivolt max. at 7.5 test current
Signal Contact
Dielectric Withstanding Voltage 1250 VAC at Sea Level
Coaxial Current Rating 5 A
Coaxial Dielectric Withstanding Voltage 1000 VAC at Sea Level
Coaxial Impedance 75 ȉor 50 ȉ
Coaxial VSWR Less than 1.30 +.03F for F up to 500 MHz
Coaxial Insertion Loss .3dB loss at 500 MHz
High Power Current Rating Up to 40 A
High Power
Dielectric Withstanding Voltage 1000 VAC at Sea Level
High Voltage Current Rating 5 A
High Voltage Contact
Dielectric Withstanding Voltage 2800 V at Sea Level
ɀ5 A standard current rating
ɀClinch Nut and Float Mount Options
Dimensions are shown in mm (inch)
Dimensions subject to change
132
D Subminiature Military/High Reliability
90°PC Tail with Plastic Bracket
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEMM9PD DEMM9PL DEMM9PS DEMM9PA DEMM9PG DEMM9PW
DA 15 DAMM15PD DAMM15PL DAMM15PS DAMM15PA DAMM15PG DAMM15PW
DB 25 DBMM25PD DBMM25PL DBMM25PS DBMM25PA DBMM25PG DBMM25PW
DC 37 DCMM37PD DCMM37PL DCMM37PS DCMM37PA DCMM37PG DCMM37PW
DD 50 DDMM50PD DDMM50PL DDMM50PS DDMM50PA DDMM50PG DDMM50PW
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEM9PD DEM9PL DEM9PS DEM9PA DEM9PG DEM9PW
DA 15 DAM15PD DAM15PL DAM15PS DAM15PA DAM15PG DAM15PW
DB 25 DBM25PD DBM25PL DBM25PS DBM25PA DBM25PG DBM25PW
DC 37 DCM37PD DCM37PL DCM37PS DCM37PA DCM37PG DCM37PW
DD 50 DDM50PD DDM50PL DDM50PS DDM50PA DDM50PG DDM50PW
2,84
(.112)
7,18 ± 0,25
(.283 ± .010)
5,68
(.224)
X ± 0,69 (.027)
L
A
C
B
ED
Ø Y
10°
MN
Ø 3,05
(.120)
Plug
Engaging Face DD Configuration
2,84
(.112)
F
W
7,18 ± 0,25
(.283 ± .010)
X ± 0,69 (.027)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010) M
±0,25 (.010) N
±0,13 (.005)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,30 (.484) 8,64 (.340)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,30 (.484) 8,64 (.340)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) 15,09 (.594) 10,04 (.395)
Dimensions are shown in mm (inch)
Dimensions subject to change 133
D Subminiature Military/High Reliability
90°PC Tail with Plastic Bracket
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEMM9SD DEMM9SL DEMM9SS DEMM9SA DEMM9SG DEMM9SW
DA 15 DAMM15SD DAMM15SL DAMM15SS DAMM15SA DAMM15SG DAMM15SW
DB 25 DBMM25SD DBMM25SL DBMM25SS DBMM25SA DBMM25SG DBMM25SW
DC 37 DCMM37SD DCMM37SL DCMM37SS DCMM37SA DCMM37SG DCMM37SW
DD 50 DDMM50SD DDMM50SL DDMM50SS DDMM50SA DDMM50SG DDMM50SW
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEM9SD DEM9SL DEM9SS DEM9SA DEM9SG DEM9SW
DA 15 DAM15SD DAM15SL DAM15SS DAM15SA DAM15SG DAM15SW
DB 25 DBM25SD DBM25SL DBM25SS DBM25SA DBM25SG DBM25SW
DC 37 DCM37SD DCM37SL DCM37SS DCM37SA DCM37SG DCM37SW
DD 50 DDM50SD DDM50SL DDM50SS DDM50SA DDM50SG DDM50SW
D
A
C
B
E
10°Ø Y
Ø 3,05
(.120)
N
M
2,84
(.112)
F
W
7,18 ± 0,25
(.283 ± .010)
X ± 0,69 (.027)
X ± 0,69 (.027)
2,84
(.112)
5,68
(.224)
7,18 ± 0,25
(.283 ± .010) L
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010) M
±0,25 (.010) N
±0,13 (.005)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 15,09 (.594) 10,04 (.395)
Receptacle
Engaging Face DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
Dimensions are shown in mm (inch)
Dimensions subject to change
134
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
XXXXX
Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158)
DE 9 DEMM9PF DEMM9PP DEMM9PR DEMM9PC DEMM9PK
DA 15 DAMM15PF DAMM15PP DAMM15PR DAMM15PC DAMM15PK
DB 25 DBMM25PF DBMM25PP DBMM25PR DBMM25PC DBMM25PK
DC 37 DCMM37PF DCMM37PP DCMM37PR DCMM37PC DCMM37PK
DD 50 DDMM50PF DDMM50PP DDMM50PR DDMM50PC DDMM50PK
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
XXXXX
Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158)
DE 9 DEM9PF DEM9PP DEM9PR DEM9PC DEM9PK
DA 15 DAM15PF DAM15PP DAM15PR DAM15PC DAM15PK
DB 25 DBM25PF DBM25PP DBM25PR DBM25PC DBM25PK
DC 37 DCM37PF DCM37PP DCM37PR DCM37PC DCM37PK
DD 50 DDM50PF DDM50PP DDM50PR DCM50PC DDM50PK
D Subminiature Military/High Reliability
90°PC Tail
Plug
Engaging Face
2,84
(.112)
5,68
(.224)
7,18 ± 0,25
(.283 ± .010)
X ± 0,69 (.027)
L
K
DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
D
E
A
BC
Ø 3,05 (.120)
Ø Y
10°
2,84
(.112)
F
W
X ± 0,69 (.027)
7,18 ± 0,25
(.283 ± .010)
Dimensions are shown in mm (inch)
Dimensions subject to change 135
2,84
(.112)
5,68
(.224)
7,18 ± 0,25
(.283 ± .010)
X ± 0,69 (.027)
L
K
D
E
A
B
C
Ø Y
10°
Ø 3,05 (.120)
2,84
(.112)
F
W
X ± 0,69 (.027)
7,18 ± 0,25
(.283 ± .010)
D Subminiature Military/High Reliability
90°PC Tail
Engaging Face DD Configuration
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
ɀFor hardware view (Standard), see page 226.
Dimensions
Shell Size A
±0,38 (.015) B
±0.13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
XXXXX
Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158)
DE 9 DEMM9SF DEMM9SP DEMM9SR DEMM9SC DEMM9SK
DA 15 DAMM15SF DAMM15SP DAMM15SR DAMM15SC DAMM15SK
DB 25 DBMM25SF DBMM25SP DBMM25SR DBMM25SC DBMM25SK
DC 37 DCMM37SF DCMM37SP DCMM37SR DCMM37SC DCMM37SK
DD 50 DDMM50SF DDMM50SP DDMM50SR DDMM50SC DDMM50SK
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
XXXXX
Shell Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158)
DE 9 DEM9SF DEM9SP DEM9SR DEM9SC DEM9SK
DA 15 DAM15SF DAM15SP DAM15SR DAM15SC DAM15SK
DB 25 DBM25SF DBM25SP DBM25SR DBM25SC DBM25SK
DC 37 DCM37SF DCM37SP DCM37SR DCM37SC DCM37SK
DD 50 DDM50SF DDM50SP DDM50SR DDM50SC DDM50SK
Dimensions are shown in mm (inch)
Dimensions subject to change
136
D Subminiature Military/High Reliability
Straight PC Tail
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEMM9PE* DEMM9PM* DEMM9PZ* DEMM9PB DEMM9PH DEMM9PX*
DA 15 DAMM15PE* DAMM15PM* DAMM15PZ* DAMM15PB DAMM15PH DAMM15PX*
DB 25 DBMM25PE* DBMM25PM* DBMM25PZ* DBMM25PB DBMM25PH DBMM25PX*
DC 37 DCMM37PE* DCMM37PM* DCMM37PZ* DCMM37PB DCMM37PH DCMM37PX*
DD 50 DDMM50PE* DDMM50PM* DDMM50PZ* DDMM50PB DDMM50PH DDMM50PX*
Note: Spacers (shipped loose) provided only on parts marked *
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEM9PE DEM9PM DEM9PZ DEM9PB DEM9PH DEM9PX
DA 15 DAM15PE DAM15PM DAM15PZ DAM15PB DAM15PH DAM15PX
DB 25 DBM25PE DBM25PM DBM25PZ DBM25PB DBM25PH DBM25PX
DC 37 DCM37PE DCM37PM DCM37PZ DCM37PB DCM37PH DCM37PX
DD 50 DDM50PE DDM50PM DDM50PZ DDM50PB DDM50PH DDM50PX
Dimensions
ABCDEFWWKKL
Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (0.39)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
A
B
C
10°
ED
Ø 3,05
(.120)
X ± 0,69 (.027)
SPACER (SHIPPED LOOSE)
FOR REFERENCE ONLY Ø Y
6,86
(.270)
2,84
(.112)
5,69
(.224)
L
K
Plug
Engaging Face DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 137
D Subminiature Military/High Reliability
Straight PC Tail
Part Numbers
Military Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEMM9SE* DEMM9SM* DEMM9SZ* DEMM9SB DEMM9SH DEMM9SX*
DA 15 DAMM15SE* DAMM15SM* DAMM15SZ* DAMM15SB DAMM15SH DAMM15SX*
DB 25 DBMM25SE* DBMM25SM* DBMM25SZ* DBMM25SB DBMM25SH DBMM25SX*
DC 37 DCMM37SE* DCMM37SM* DCMM37SZ* DCMM37SB DCMM37SH DCMM37SX*
DD 50 DDMM50SE* DDMM50SM* DDMM50SZ* DDMM50SB DDMM50SH DDMM50SX*
Note: Spacers (shipped loose) provided only on parts marked *
Commercial Part Numbers
XYXY
0,76 (.030) 1,02 (.040)
Shell XXXXXX
Size Layout 3,23 (.127) 4,01 (.158) 4,65 (.183) 3,23 (.127) 4,01 (.158) 4,65 (.183)
DE 9 DEM9SE DEM9SM DEM9SZ DEM9SB DEM9SH DEM9SX
DA 15 DAM15SE DAM15SM DAM15SZ DAM15SB DAM15SH DAM15SX
DB 25 DBM25SE DBM25SM DBM25SZ DBM25SB DBM25SH DBM25SX
DC 37 DCM37SE DCM37SM DCM37SZ DCM37SB DCM37SH DCM37SX
DD 50 DDM50SE DDM50SM DDM50SZ DDM50SB DDM50SH DDM50SX
Dimensions
ABCDEFWKL
Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
A
B
C
10°
ED
Ø 3,05
(.120)
SPACER (SHIPPED LOOSE)
FOR REFERENCE ONLY Ø Y
X ± 0,69 (.027)
6,86
(.270)
2,84
(.112)
5,69
(.224)
L
K
2,84
(.112)
F
W
Receptacle
Engaging Face DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
138
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
D Subminiature Military/High Reliability
Wrap Post Connector
Part Numbers
Shell Size Layout Military Part Numbers
DE 9 DEMM9PF179 DEMM9PF179A
DA 15 DAMM15PF179 DAMM15PF179A
DB 25 DBMM25PF179 DBMM25PF179A
DC 37 DCMM37PF179 DCMM37PF179A
DD 50 DDMM50PF179 DDMM50PF179A
Shell Size Layout Commercial Part Numbers
DE 9 DEM9PF179 DEM9PF179A
DA 15 DAM15PF179 DAM15PF179A
DB 25 DBM25PF179 DBM25PF179A
DC 37 DCM37PF179 DCM37PF179A
DD 50 DDM50PF179 DDM50PF179A
Ø 3,05
(.120)
A
B
C
10°
ED
5,99 ± 0,38
(.236 ± .015)
X
0,61 (.024)
2,84
(.112)
5,69
(.224)
L
K
2,84
(.112)
F
W
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Plug
Engaging Face
DD Configuration
Modification Code Number of
Wraps X
±0,51 (.020)
F179 2 9,60 (.378)
F179A 3 12,90 (.508)
Dimensions are shown in mm (inch)
Dimensions subject to change 139
D Subminiature Military/High Reliability
Wrap Post Connector
Part Numbers
Shell Size Layout Military Part Numbers
DE 9 DEMM9SF179 DEMM9SF179A
DA 15 DAMM15SF179 DAMM15SF179A
DB 25 DBMM25SF179 DBMM25SF179A
DC 37 DCMM37SF179 DCMM37SF179A
DD 50 DDMM50SF179 DDMM50SF179A
Shell Size Layout Commercial Part Numbers
DE 9 DEM9SF179 DEM9SF179A
DA 15 DAM15SF179 DAM15SF179A
DB 25 DBM25SF179 DBM25SF179A
DC 37 DCM37SF179 DCM37SF179A
DD 50 DDM50SF179 DDM50SF179A
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
10°
A
B
C
D
E
Ø 3,05 (.120)
5,99 ± 0,38
(.236 ± .015)
0,61 (.024)
X
2,84
(.112)
5,69
(.224)
L
K
2,84
(.112)
F
W
Modification
Code Number of
Wraps X
±0,51 (.020)
F179 2 9,60 (.378)
F179A 3 12,90 (.508)
Receptacle
Engaging Face
DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 274.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
140
D Subminiature Military/High Reliability
Solder Cup Connector
Part Numbers
Military Part Numbers
Shell Dual Clinch Nut
Size Layout Through Hole Float Mount #4-40 UNC
DE 9 DEMM9P DEMMY9P DEMME9P
DA 15 DAMM15P DAMMY15P DAMME15P
DB 25 DBMM25P DBMMY25P DBMME25P
DC 37 DCMM37P DCMMY37P DCMME37P
DD 50 DDMM50P DDMMY50P DDMME50P
Commercial Part Numbers
Shell Dual Clinch Nut
Size Layout Through Hole Float Mount #4-40 UNC
DE 9 DEM9P DEMY9P DEME9P
DA 15 DAM15P DAMY15P DAME15P
DB 25 DBM25P DBMY25P DBME25P
DC 37 DCM37P DCMY37P DCME37P
DD 50 DDM50P DDMY50P DDME50P
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0.76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
A
C
B
ED
10°
Ø 3,05
(.120)
10,72 (.422)
MAX
5,69
(.224) 2,84
(.112)
L
K
2,84
(.112)
F
W
Plug
Engaging Face DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 141
D Subminiature Military/High Reliability
Solder Cup Connector
Part Numbers
Military Part Numbers
Shell Dual Clinch Nut
Size Layout Through Hole Float Mount #4-40 UNC
DE 9 DEMM9S DEMMY9S DEMME9S
DA 15 DAMM15S DAMMY15S DAMME15S
DB 25 DBMM25S DBMMY25S DBMME25S
DC 37 DCMM37S DCMMY37S DCMME37S
DD 50 DDMM50S DDMMY50S DDMME50S
Commercial Part Numbers
Shell Dual Clinch Nut
Size Layout Through Hole Float Mount #4-40 UNC
DE 9 DEM9S DEMY9S DEME9S
DA 15 DAM15S DAMY15S DAME15S
DB 25 DBM25S DBMY25S DBME25S
DC 37 DCM37S DCMY37S DCME37S
DD 50 DDM50S DDMY50S DDME50S
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
A
C
B
ED
10°
Ø 3,05
(.120)
9,91 (.390)
MAX
5,69
(.224) 2,84
(.112)
L
K
2,84
(.112)
F
W
Receptacle
Engaging Face DD Configuration
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
142
D Subminiature Military/High Reliability
MIL-C-24308 Cross Reference
Military
Part Number ITT Cannon
Part Number Military
Part Number ITT Cannon
Part Number Military
Part Number ITT Cannon
Part Number
M24308/1-1 DEMM9S
M24308/1-2 DAMM15S
M24308/1-3 DBMM25S
M24308/1-4 DCMM37S
M24308/1-5 DDMM50S
M24308/1-12 DEMMF9S
M24308/1-13 DAMMF15S
M24308/1-14 DBMMF25S
M24308/1-15 DCMMF37S
M24308/1-16 DDMMF50S
M24308/1-23 DEMMY9S
M24308/1-24 DAMMY15S
M24308/1-25 DBMMY25S
M24308/1-26 DCMMY37S
M24308/1-27 DDMMY50S
M24308/2-1 DEMAM9S
M24308/2-2 DAMAM15S
M24308/2-3 DBMAM25S
M24308/2-4 DCMAM37S
M24308/2-5 DDMAM50S
M24308/2-6 DEMAMT9S
M24308/2-7 DAMAMT15S
M24308/2-8 DBMAMT25S
M24308/2-9 DCMAMT37S
M24308/2-10 DDMAMT50S
M24308/2-23 DEMAMF9S
M24308/2-24 DAMAMF15S
M24308/2-25 DBMAMF25S
M24308/2-26 DCMAMF37S
M24308/2-27 DDMAMF50S
M24308/2-34 DEMAMFT9S
M24308/2-35 DAMAMFT15S
M24308/2-36 DBMAMFT25S
M24308/2-37 DCMAMFT37S
M24308/2-38 DDMAMFT50S
M24308/2-281 DEMAM9S-FO
M24308/2-282 DAMAM15S-FO
M24308/2-283 DBMAM25S-FO
M24308/2-284 DCMAM37S-FO
M24308/2-285 DDMAM50S-FO
M24308/2-292 DEMAMF9S-FO
M24308/2-293 DAMAMF15S-FO
M24308/2-294 DBMAMF25S-FO
M24308/2-295 DCMAMF37S-FO
M24308/2-296 DDMAMF50S-FO
M24308/2-335 DBMAMR25S
M24308/2-336 DCMAMR37S
M24308/2-341 DAMAMR15S
M24308/2-342 DEMAMY9S
M24308/2-343 DAMAMY15S
M24308/2-344 DBMAMY25S
M24308/2-345 DCMAMY37S
M24308/2-346 DDMAMY50S
M24308/2-353 DEMAMYT9S
M24308/2-354 DAMAMYT15S
M24308/2-355 DBMAMYT25S
M24308/2-356 DCMAMYT37S
M24308/2-357 DDMAMYT50S
M24308/2-482 DEMAMY9S-FO
M24308/2-483 DEMAMY15S-FO
M24308/2-484 DEMAMY25S-FO
M24308/2-485 DCMAMY37S-FO
M24308/2-486 DDMAMY50S-FO
M24308/3-1 DEMM9P
M24308/3-2 DAMM15P
M24308/3-3 DBMM25P
M24308/3-4 DCMM37P
M24308/3-5 DDMM50P
M24308/3-12 DEMMF9P
M24308/3-13 DAMMF15P
M24308/3-14 DBMMF25P
M24308/3-15 DCMMF37P
M24308/3-16 DDMMF50P
M24308/4-1 DEMAM9P
M24308/4-2 DAMAM15P
M24308/4-3 DBMAM25P
M24308/4-4 DCMAM37P
M24308/4-5 DDMAM50P
M24308/4-6 DEMAMT9P
M24308/4-7 DAMAMT15P
M24308/4-8 DBMAMT25P
M24308/4-9 DCMAMT37P
M24308/4-10 DDMAMT50P
M24308/4-259 DEMAM9P-FO
M24308/4-260 DAMAM15P-FO
M24308/4-261 DBMAMF25P-FO
M24308/4-262 DCMAM37P-FO
M24308/4-263 DDMAM50P-FO
M24308/4-302 DEMAMF9P
M24308/4-303 DAMAMF15P
M24308/4-304 DBMAMF25P
M24308/4-305 DCMAMF37P
M24308/4-306 DDMAMF50P
M24308/4-313 DEMAMFT9P
M24308/4-314 DAMAMFT15P
M24308/4-315 DBMAMFT25P
M24308/4-316 DCMAMFT37P
M24308/4-317 DDMAMFT50P
M24308/4-324 DEMAMF9P-FO
M24308/4-325 DAMAMF15P-FO
M24308/4-326 DBMAMF25P-FO
M24308/4-327 DCMAMF37P-FO
M24308/4-328 DDMAMF50P-FO
M24308/5-1 DEMM9SNM
M24308/5-2 DAMM15SNM
M24308/5-3 DBMM25SNM
M24308/5-4 DCMM37SNM
M24308/5-5 DDMM50SNM
M24308/5-12 DEMMF9SNM
M24308/5-13 DAMMF15SNM
M24308/5-14 DBMMF25SNM
M24308/5-15 DCMMF37SNM
M24308/5-16 DDMMF50SNM
M24308/5-23 DDMMY9SNM
M24308/5-24 DAMMY15SNM
M24308/5-25 DBMMY25SNM
M24308/5-26 DCMMY37SNM
M24308/5-27 DDMMY50SNM
M24308/6-1 DEMAM9SNM
M24308/6-2 DAMAM15SNM
M24308/6-3 DBMAM25SNM
M24308/6-4 DCMAM37SNM
M24308/6-5 DDMAM50SNM
M24308/6-6 DEMAMT9SNM
M24308/6-7 DAMAMT15SNM
M24308/6-8 DBMAMT25SNM
M24308/6-9 DCMAMT37SNM
M24308/6-10 DDMAMT50SNM
M24308/6-259 DEMAMF9SNM
M24308/6-260 DAMAMF15SNM
M24308/6-261 DBMAMF25SNM
M24308/6-262 DCMAMF37SNM
M24308/6-263 DDMAMF50SNM
M24308/6-270 DEMAMFT9SNM
M24308/6-271 DAMAMFT15SNM
M24308/6-272 DBMAMFT25SNM
M24308/6-273 DCMAMFT37SNM
M24308/6-274 DDMAMFT50SNM
M24308/6-281 DEMAM9SNM-FO
M24308/6-282 DAMAM15SNM-FO
M24308/6-283 DBMAM25SNM-FO
M24308/6-284 DCMAM37SNM-FO
M24308/6-285 DDMAM50SNM-FO
M24308/6-324 DEMAMF9SNM-FO
M24308/6-325 DAMAMF15SNM-FO
M24308/6-326 DBMAMF25SNM-FO
M24308/6-327 DCMAMF37SNM-FO
M24308/6-328 DDMAMF50SNM-FO
M24308/6-453 DEMAMY9SNM
M24308/6-454 DAMAMY15SNM
M24308/6-455 DBMAMY25SNM
M24308/6-456 DCMAMY37SNM
M24308/6-457 DDMAMY50SNM
M24308/6-464 DDMEMYT9SNM
M24308/6-465 DAMAMYT15SNM
M24308/6-466 DBMAMYT25SNM
M24308/6-467 DCMAMYT37SNM
M24308/6-468 DDMAMYT50SNM
M24308/6-491 DEMAMY9SNM-FO
M24308/6-492 DAMAMY15SNM-FO
M24308/6-493 DBMAMY25SNM-FO
M24308/6-494 DCMAMY37SNM-FO
M24308/6-495 DDMAMY50SNM-FO
M24308/7-1 DEMM9PNM
M24308/7-2 DAMM15PNM
M24308/7-3 DBMM25PNM
M24308/7-4 DCMM37PNM
M24308/7-5 DDMM50PNM
M24308/7-12 DEMMF9PNM
M24308/7-13 DAMMF15PNM
M24308/7-14 DBMMF25PNM
M24308/7-15 DCMMF37PNM
M24308/7-16 DDMMF50PNM
M24308/8-1 DEMAM9PNM
M24308/8-2 DAMAM15PNM
M24308/8-3 DBMAM25PNM
M24308/8-4 DCMAM37PNM
M24308/8-5 DDMAM50PNM
M24308/8-6 DEMAMT9PNM
M24308/8-7 DAMAMT15PNM
M24308/8-8 DBMAMT25PNM
M24308/8-9 DCMAMT37PNM
M24308/8-10 DDMAMT50PNM
M24308/8-259 DEMAM9PNM-FO
M24308/8-260 DAMAM15PNM-FO
M24308/8-261 DBMAM25PNM-FO
M24308/8-262 DCMAM37PNM-FO
M24308/8-263 DDMAM50PNM-FO
M24308/8-302 DEMAMF9PNM
M24308/8-303 DAMAMF15PNM
M24308/8-304 DBMAMF25PNM
M24308/8-305 DCMAMF37PNM
M24308/8-306 DDMAMF50PNM
M24308/8-313 DEMAMFT9PNM
M24308/8-314 DAMAMFT15PNM
Dimensions are shown in mm (inch)
Dimensions subject to change 143
D Subminiature Military/High Reliability
MIL-C-24308 Cross Reference
Military
Part Number ITT Cannon
Part Number Military
Part Number ITT Cannon
Part Number Military
Part Number ITT Cannon
Part Number
M24308/8-315 DBMAMFT25PNM
M24308/8-316 DCMAMFT37PNM
M24308/8-317 DDMAMFT50PNM
M24308/8-324 DEMAMF9PNM-FO
M24308/8-325 DAMAMF15PNM-FO
M24308/8-326 DBMAMF25PNM-FO
M24308/8-327 DCMAMF37PNM-FO
M24308/8-328 DDMAMF50PNM-FO
M24308/9-1 DEH9P002
M24308/9-2 DAH15P002
M24308/9-3 DBH25P002
M24308/9-4 DCH37P002
M24308/9-5 DDH50P002
M24308/9-6 DEH9P001
M24308/9-7 DAH15P001
M24308/9-8 DBH25P001
M24308/9-9 DCH37P001
M24308/9-10 DDH50P001
M24308/9-11 DEH9P202
M24308/9-12 DAH15P202
M24308/9-13 DBH25P202
M24308/9-14 DCH37P202
M24308/9-15 DDH50P202
M24308/9-16 DEH9P201
M24308/9-17 DAH15P201
M24308/9-18 DBH25P201
M24308/9-19 DCH37P201
M24308/9-20 DDH50P201
M24308/23-1 DEMM9SM
M24308/23-2 DAMM15SM
M24308/23-3 DBMM25SM
M24308/23-4 DCMM37SM
M24308/23-5 DDMM50SM
M24308/23-7 DEMM9SZ
M24308/23-8 DAMM15SZ
M24308/23-9 DBMM25SZ
M24308/23-10 DCMM37SZ
M24308/23-11 DDMM50SZ
M24308/23-13 DEMM9SH
M24308/23-14 DAMM15SH
M24308/23-15 DBMM25SH
M24308/23-16 DCMM37SH
M24308/23-17 DDMM50SH
M24308/23-19 DEMM9SX
M24308/23-20 DAMM15SX
M24308/23-21 DBMM25SX
M24308/23-22 DCMM37SX
M24308/23-23 DDMM50SX
M24308/23-25 DEMM9SD
M24308/23-26 DAMM15SD
M24308/23-27 DBMM25SD
M24308/23-28 DCMM37SD
M24308/23-29 DDMM50SD
M24308/23-31 DEMM9SL
M24308/23-32 DAMM15SL
M24308/23-33 DBMM25SL
M24308/23-34 DCMM37SL
M24308/23-35 DDMM50SL
M24308/23-37 DEMM9SA
M24308/23-38 DAMM15SA
M24308/23-39 DBMM25SA
M24308/23-40 DCMM37SA
M24308/23-41 DDMM50SA
M24308/23-43 DEMM9SG
M24308/23-44 DAMM15SG
M24308/23-45 DBMM25SG
M24308/23-46 DCMM37SG
M24308/23-47 DDMM50SG
M24308/23-49 DEMM9SS
M24308/23-50 DAMM15SS
M24308/23-51 DBMM25SS
M24308/23-52 DCMM37SS
M24308/23-53 DDMM50SS
M24308/23-55 DEMM9SW
M24308/23-56 DAMM15SW
M24308/23-57 DBMM25SW
M24308/23-58 DCMM37SW
M24308/23-59 DDMM50SW
M24308/24-1 DEMM9PM
M24308/24-2 DAMM15PM
M24308/24-3 DBMM25PM
M24308/24-4 DCMM37PM
M24308/24-5 DDMM50PM
M24308/24-7 DEMM9PZ
M24308/24-8 DAMM15PZ
M24308/24-9 DBMM25PZ
M24308/24-10 DCMM37PZ
M24308/24-11 DDMM50PZ
M24308/24-13 DEMM9PH
M24308/24-14 DAMM15PH
M24308/24-15 DBMM25PH
M24308/24-16 DCMM37PH
M24308/24-17 DDMM50PH
M24308/24-19 DEMM9PX
M24308/24-20 DAMM15PX
M24308/24-21 DBMM25PX
M24308/24-22 DCMM37PX
M24308/24-23 DDMM50PX
M24308/24-25 DEMM9PD
M24308/24-26 DAMM15PD
M24308/24-27 DBMM25PD
M24308/24-28 DCMM37PD
M24308/24-29 DDMM50PD
M24308/24-31 DEMM9PL
M24308/24-32 DAMM15PL
M24308/24-33 DBMM25PL
M24308/24-34 DCMM37PL
M24308/24-35 DDMM50PL
M24308/24-37 DEMM9PA
M24308/24-38 DAMM15PA
M24308/24-39 DBMM25PA
M24308/24-40 DCMM37PA
M24308/24-41 DDMM50PA
M24308/24-43 DEMM9PG
M24308/24-44 DAMM15PG
M24308/24-45 DBMM25PG
M24308/24-46 DCMM37PG
M24308/24-47 DDMM50PG
M24308/24-49 DEMM9PS
M24308/24-50 DAMM15PS
M24308/24-51 DBMM25PS
M24308/24-52 DCMM37PS
M24308/24-53 DDMM50PS
M24308/24-55 DEMM9PW
M24308/24-56 DAMM15PW
M24308/24-57 DBMM25PW
M24308/24-58 DCMM37PW
M24308/24-59 DDMM50PW
M24308/26-1 D20418-2
M24308/26-2 D20418-39
MIL-C-39029 Crimp Contacts
Military
Part Number ITT Cannon
Part Number Contact Size Contact Style Product Line MIL Specification
M39029/63-368 031-1007-078 20 Socket D*MA MIL-C-24308
M39029/64-369 330-5291-097 20 Pin D*MA MIL-C-24308
Dimensions are shown in mm (inch)
Dimensions subject to change
144
D Subminiature Military/High Reliability
HE501/D*M Cross Reference
HE501
Part Number ITT Cannon
Part Number
HE501N09AS3 DEM9S
HE501N15AS3 DAM15S
HE501N25AS3 DBM25S
HE501N37AS3 DCM37S
HE501N50AS3 DDM50S
HE501F09AS3 DEMY9S
HE501F15AS3 DAMY15S
HE501F25AS3 DBMY25S
HE501F37AS3 DCMY37S
HE501F50AS3 DDMY50S
HE501N09YS43 DEM9SOL3
HE501N15YS43 DAM15SOL3
HE501N25YS43 DBM25SOL3
HE501N37YS43 DCM37SOL3
HE501N50YS43 DDM50SOL3
HE501P09VS63E DEM9S1A5N
HE501P15VS63E DAM15SA15N
HE501P25VS63E DBM25S1A5N
HE501P37VS63E DCM37S1A5N
HE501P50VS63E DDM50S1A5N
HE501
Part Number ITT Cannon
Part Number
HE501N9KS33 DEM9SF179A
HE501N15KS33 DAM15SF179A
HE501N25KS33 DBM25SF179A
HE501N37KS33 DCM37SF179A
HE501N50KS33 DDM50SF179A
HE501N09AP DEM9P
HE501N15AP DAM15P
HE501N25AP DBM25P
HE501N37AP DCM37P
HE501N50AP DDM50P
HE501F09AP DEMY9P
HE501F15AP DAMY15P
HE501F25AP DBMY25P
HE501F37AP DCMY37P
HE501F50AP DDMY50P
HE501
Part Number ITT Cannon
Part Number
HE501N09YP4 DEM9POL3
HE501N15YP4 DAM15POL3
HE501N25YP4 DBM25POL3
HE501N37YP4 DCM37POL3
HE501N50YP4 DDM50POL3
HE501P09VP6E DEM9P1A5N
HE501P15VP6E DAM15P1A5N
HE501P25VP6E DBM25P1A5N
HE501P37VP6E DCM39P1A5N
HE501P50VP6E DDM50P1A5N
HE501N9KP3 DEM9PF179A
HE501N15KP3 DAM15PF179A
HE501N25KP3 DBM25PF179A
HE501N37KP3 DCM37PF179A
HE501N50KP3 DDM50PF179A
Dimensions are shown in mm (inch)
Dimensions subject to change 145
D Subminiature Military/High Reliability
Test Data
MIL-C-24308 Test Extracts Applicable To Class G Connectors
Test Description Test Requirements MIL-STD-1344
Test Method
Mating/Unmating Force Shell Size Layout Max Unmating (lbs.) Max Mating (lbs.) 2013
DE 9 6 10
DA 15 10 17
DB 25 17 28
DC 37 24 39
DD 50 30 49
Contact Retention Contacts shall be retained in their inserts by a 9 pound (minimum) force. The axial displacement of contacts shall not exceed .012 inch while under load. 2007
Insulation Resistance After humidity 1 Megohm (min.)
All other conditions 5000 Megohm (min.) 3003
Contact Resistance After salt spray not to exceed 65 millivolts max. 3004
Size 20 AWG; 7.5 A
Vibration No damage and no loosening of parts due to vibration. No interruption of electrical continuity longer than 1 microsecond. 2005
Test Cond. 4
Shock No damage and no loosening of parts. No interruption of electrical continuity longer than 1 microsecond. 2004
Test Cond. E
Durability No electrical or mechanical defects after 500 cycles of mating and unmating. 2016
200 ±100 cycles/hour
Salt Spray (Corrosion) No exposure of base metal due to corrosion which will affect performance. Product will meet further tests as specified. 1001
Cond. B
Fluid Immersion 20 hours immersion MIL-H-5606 Hydraulic Fluid.
20 hours immersion MIL-L-23699 Lubricating Fluid.
Connectors shall meet mating/unmating force following immersion.
1016
Dimensions are shown in mm (inch)
Dimensions subject to change
146
D Subminiature Military/High Reliability
Coaxial 90°PCB (Sizes DE-DC)
75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMP5C1PJ DEMMC5C1PJ DEMMD5C1PJ DEMMG5C1PJ
DA 7W2 DAMMP7C2PJ DAMMC7C2PJ DAMMD7C2PJ DAMMG7C2PJ
DA 11W1 DAMMP11C1PJ DAMMC11C1PJ DAMMD11C1PJ DAMMG11C1PJ
DA 3W3 DAMMP3C3PJ DAMMC3C3PJ DAMMD3C3PJ DAMMG3C3PJ
DA 3WK3DAMMP3CK3PJTM DAMMC3CK3PJTM DAMMD3CK3PJTM DAMMG3CK3PJTM
DB 5W5 DBMMP5C5PJ DBMMC5C5PJ DBMMD5C5PJ DBMMG5C5PJ
DB 9W4 DBMMP9C4PJ DBMMC9C4PJ DBMMD9C4PJ DBMMG9C4PJ
DB 13W3 DBMMP13C3PJ DBMMC13C3PJ DBMMD13C3PJ DBMMG13C3PJ
DB 17W2 DBMMP17C2PJ DBMMC17C2PJ DBMMD17C2PJ DBMMG17C2PJ
DB 21W1 DBMMP21C1PJ DBMMC21C1PJ DBMMD21C1PJ DBMMG21C1PJ
DC 8W8 DCMMP8C8PJ DCMMC8C8PJ DCMMD8C8PJ DCMMG8C8PJ
DC 13W6 DCMMP13C6PJ DCMMC13C6PJ DCMMD13C6PJ DCMMG13C6PJ
DC 17W5 DCMMP17C5PJ DCMMC17C5PJ DCMMD17C5PJ DCMMG17C5PJ
DC 21WA4 DCMMP21CA4PJ DCMMC21CA4PJ DCMMD21CA4PJ DCMMG21CA4PJ
DC 25W3 DCMMP25C3PJ DCMMC25C3PJ DCMMD25C3PJ DCMMG25C3PJ
DC 27W2 DCMMP27C2PJ DCMMC27C2PJ DCMMD27C2PJ DCMMG27C2PJ
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1PJ
For DD shell size, see page 148.
Keyed
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 228-229.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
0,82
(.032)
2,92
(.115)
Ø 0,76
(.030)
A
BC
E
10°
BOARDLOCK
D
SCREW LOCK
#4-40 UNC
12,34
(.486) 8,64
(.340) RIVNUT
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
BRACKET,
METAL
3,89 (.153)
MIN
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
11,94 ± 0,33
(.470 ± .013)
L
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
F
W
2,84
(.112)
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 147
D Subminiature Military/High Reliability
Coaxial 90°PCB (Sizes DE-DC)
75 Ohm Part Numbers* with Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMP5C1SJ DEMMC5C1SJ DEMMD5C1SJ DEMMG5C1SJ
DA 7W2 DAMMP7C2SJ DAMMC7C2SJ DAMMD7C2SJ DAMMG7C2SJ
DA 11W1 DAMMP11C1SJ DAMMC11C1SJ DAMMD11C1SJ DAMMG11C1SJ
DA 3W3 DAMMP3C3SJ DAMMC3C3SJ DAMMD3C3SJ DAMMG3C3SJ
DA 3WK3DAMMP3CK3SJTM DAMMC3CK3SJTM DAMMD3CK3SJTM DAMMG3CK3SJTM
DB 5W5 DBMMP5C5SJ DBMMC5C5SJ DBMMD5C5SJ DBMMG5C5SJ
DB 9W4 DBMMP9C4SJ DBMMC9C4SJ DBMMD9C4SJ DBMMG9C4SJ
DB 13W3 DBMMP13C3SJ DBMMC13C3SJ DBMMD13C3SJ DBMMG13C3SJ
DB 17W2 DBMMP17C2SJ DBMMC17C2SJ DBMMD17C2SJ DBMMG17C2SJ
DB 21W1 DBMMP21C1SJ DBMMC21C1SJ DBMMD21C1SJ DBMMG21C1SJ
DC 8W8 DCMMP8C8SJ DCMMC8C8SJ DCMMD8C8SJ DCMMG8C8SJ
DC 13W6 DCMMP13C6SJ DCMMC13C6SJ DCMMD13C6SJ DCMMG13C6SJ
DC 17W5 DCMMP17C5SJ DCMMC17C5SJ DCMMD17C5SJ DCMMG17C5SJ
DC 21WA4 DCMMP21CA4SJ DCMMC21CA4SJ DCMMD21CA4SJ DCMMG21CA4SJ
DC 25W3 DCMMP25C3SJ DCMMC25C3SJ DCMMD25C3SJ DCMMG25C3SJ
DC 27W2 DCMMP27C2SJ DCMMC27C2SJ DCMMD27C2SJ DCMMG27C2SJ
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMP5X1SJ
For DD shell size, see page 149.
Keyed
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 231-232.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Engaging Face
Screw lock, boardlock and signal contacts
removed for clarity
Screw lock, boardlock and coaxial contact
removed for clarity
10°0,79
(.031)
2,92
(.115)
Ø 0,76
(.030)
A
B
C
ED
BOARDLOCK
12,34
(.486) 8,64
(.340)
BRACKET,
METAL
RIVNUT
#4-40 UNC
SCREW LOCK
#4-40 UNC
6,50 ± 0,25
(.256 ± .010)
3,89 (.153)
MIN
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100)
11,94 ± 0,33
(.470 ± .013)
L
2,84
(.112)
F
W
7,18 ± 0,25
(.283 ± .010)
4,33 ± 0,38
(.170 ± .015)
Note: ɋDimension varies with altenate bracket configuration, see Reader’s Resource page 225.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47.04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Dimensions are shown in mm (inch)
Dimensions subject to change
148
D Subminiature Military/High Reliability
Coaxial 90°PCB (Size DD)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMP24C7PJ DDMMC24C7PJ DDMMD24C7PJ DDMMG24C7PJ
DD 36W4 DDMMP36C4PJ DDMMC36C4PJ DDMMD36C4PJ DDMMG36C4PJ
DD 43W2 DDMMP43C2PJ DDMMC43C2PJ DDMMD43C2PJ DDMMG43C2PJ
DD 47W1 DDMMP47C1PJ DDMMC47C1PJ DDMMD47C1PJ DDMMG47C1PJ
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMP24X7PJ
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Screw lock, boardlock, and coaxial contact
removed for clarity
Screw lock, boardlock, and signal contacts
removed for clarity
11,53 ± 0,25
(.454 ± .010)
5,68
(.224)
2,84
(.112)
4,33 ± 0,38
(.170 ± .015)
RIVNUT
#4-40 UNC
F
W
3,89 (.153)
MIN
11,94 ± 0,33
(.470 ± .013)
L
2,54
(.100)
Ø 0,51
(.020)
0,56
(.023)
6,50 ± 0,25
(.256 ± .010)
13,74
(.541)
10,06
(.396)
SCREW LOCK
#4-40 UNC
BRACKET,
METAL
AC
B
D
E
Ø 0,76
(.030)
0,82
(.032)
2,92
(.115)
BOARDLOCK
10°
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 230.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 149
D Subminiature Military/High Reliability
Coaxial 90°PCB (Size DD)
75 Ohm Part Numbers* with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMP24C7SJ DDMMC24C7SJ DDMMD24C7SJ DDMMG24C7SJ
DD 36W4 DDMMP36C4SJ DDMMC36C4SJ DDMMD36C4SJ DDMMG36C4SJ
DD 43W2 DDMMP43C2SJ DDMMC43C2SJ DDMMD43C2SJ DDMMG43C2SJ
DD 47W1 DDMMP47C1SJ DDMMC47C1SJ DDMMD47C1SJ DDMMG47C1SJ
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMG36X4SJ
Receptacle
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
Screw lock, boardlock, and coaxial contacts
removed for clarity
Screw lock, boardlock, and signal contacts
removed for clarity
WF
5,68
(.224)
11,53 ± 0,25
(.454 ± .010)
4,33 ± 0,38
(.170 ± .015)
2,84 (.112)
RIVNUT
#4-40 UNC
L
3,89 (.153)
MIN
0,56
(.023)
Ø 0,51
(.020)
2,54
(.100) 11,94 ± 0,33
(.470 ± .013)
A
C
B
Ø 0,76
(.030)
0,82
(.032)
10°
E
2,92
(.115)
D
BOARDLOCK
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 233.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
6,50 ± 0,25
(.256 ± .010)
13,74
(.541)
10,06
(.396)
BRACKET,
METAL
SCREW LOCK
#4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change
150
D Subminiature Military/High Reliability
Coaxial Straight PCB (Sizes DE-DC)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMV5C1PN DEMMZ5C1PN DEMMN5C1PN
DA 7W2 DAMMV7C2PN DAMMZ7C2PN DAMMN7C2PN
DA 11W1 DAMMV11C1PN DAMMZ11C1PN DAMMN11C1PN
DA 3W3 DAMMV3C3PN DAMMZ3C3PN DAMMN3C3PN
DA 3WK3DAMMV3CK3PNTM DAMMZ3CK3PNTM DAMMN3CK3PNTM
DB 5W5 DBMMV5C5PN DBMMZ5C5PN DBMMN5C5PN
DB 9W4 DBMMV9C4PN DBMMZ9C4PN DBMMN9C4PN
DB 13W3 DBMMV13C3PN DBMMZ13C3PN DBMMN13C3PN
DB 17W2 DBMMV17C2PN DBMMZ17C2PN DBMMN17C2PN
DB 21W1 DBMMV21C1PN DBMMZ21C1PN DBMMN21C1PN
DC 8W8 DCMMV8C8PN DCMMZ8C8PN DCMMN8C8PN
DC 13W6 DCMMV13C6PN DCMMZ13C6PN DCMMN13C6PN
DC 17W5 DCMMV17C5PN DCMMZ17C5PN DCMMN17C5PN
DC 21WA4 DCMMV21CA4PN DCMMZ21CA4PN DCMMN21CA4PN
DC 25W3 DCMMV25C3PN DCMMZ25C3PN DCMMN25C3PN
DC 27W2 DCMMV27C2PN DCMMZ27C2PN DCMMN27C2PN
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1PN
For DD shell size, see page 152.
Keyed
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
A
C
B
ED
10°
6,50 ± 0,25
(.256 ± .010)
Ø 0,76
(.030)
0,82
(.032)
3,45 (.136)
7,62 ± 0,25
(.300 ± .010)
SCREW LOCK
#4-40 UNC
2,92
(.115)
4,52 (.178)
STANDOFF
#4-40 UNC
BOARDLOCK
Ø 0,51
(.020)
0,62
(.024)
2,54
(.100)
L
F
W
2,84
(.112)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 238-239.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions are shown in mm (inch)
Dimensions subject to change 151
D Subminiature Military/High Reliability
Coaxial Straight PCB (Sizes DE-DC)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMV5C1SN DEMMZ5C1SN DEMMN5C1SN
DA 7W2 DAMMV7C2SN DAMMZ7C2SN DAMMN7C2SN
DA 11W1 DAMMV11C1SN DAMMZ11C1SN DAMMN11C1SN
DA 3W3 DAMMV3C3SN DAMMZ3C3SN DAMMN3C3SN
DA 3WK3DAMMV3CK3SNTM DAMMZ3CK3SNTM DAMMN3CK3SNTM
DB 5W5 DBMMV5C5SN DBMMZ5C5SN DBMMN5C5SN
DB 9W4 DBMMV9C4SN DBMMZ9C4SN DBMMN9C4SN
DB 13W3 DBMMV13C3SN DBMMZ13C3SN DBMMN13C3SN
DB 17W2 DBMMV17C2SN DBMMZ17C2SN DBMMN17C2SN
DB 21W1 DBMMV21C1SN DBMMZ21C1SN DBMMN21C1SN
DC 8W8 DCMMV8C8SN DCMMZ8C8SN DCMMN8C8SN
DC 13W6 DCMMV13C6SN DCMMZ13C6SN DCMMN13C6SN
DC 17W5 DCMMV17C5SN DCMMZ17C5SN DCMMN17C5SN
DC 21WA4 DCMMV21CA4SN DCMMZ21CA4SN DCMMN21CA4SN
DC 25W3 DCMMV25C3SN DCMMZ25C3SN DCMMN25C3SN
DC 27W2 DCMMV27C2SN DCMMZ27C2SN DCMMN27C2SN
Notes: *For 50 Ohm Coaxial substitute X for C. Example: DEMMV5X1SN
For DD shell size, see page 153.
Keyed
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Hardware and coaxial contact
removed for clarity
A
C
B
ED
10°
Ø 0,51
(.020)
0,62
(.024)
2,54
(1.00)
L
F
W
2,84
(.112)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 241-242.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Ø 0,76
(.030)
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
3,45 (.136)
2,92
(.115)
BOARDLOCK 0,82
(.032)
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
Dimensions are shown in mm (inch)
Dimensions subject to change
152
D Subminiature Military/High Reliability
Coaxial Straight PCB (Size DD)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMV24C7PN DDMMZ24C7PN DDMMN24C7PN
DD 36W4 DDMMV36C4PN DDMMZ36C4PN DDMMN36C4PN
DD 43W2 DDMMV43C2PN DDMMZ43C2PN DDMMN43C2PN
DD 47W1 DDMMV47C1PN DDMMZ47C1PN DDMMN47C1PN
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24XPN
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
A
C
B
10°
ED
Ø 0,76
(.030)
0,82
(.032)
3,45
(.136)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52
(.178)
STANDOFF
#4-40 UNC
0,62
(.024)
Ø 0,51
(.020)
2,54
(.100)
L
WF
5,69
(.224)
2,84
(.112)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 256.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions are shown in mm (inch)
Dimensions subject to change 153
D Subminiature Military/High Reliability
Coaxial Straight PCB (Size DD)
75 Ohm Part Numbers* with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMV24C7SN DDMMZ24C7SN DDMMN24C7SN
DD 36W4 DDMMV36C4SN DDMMZ36C4SN DDMMN36C4SN
DD 43W2 DDMMV43C2SN DDMMZ43C2SN DDMMN43C2SN
DD 47W1 DDMMV47C1SN DDMMZ47C1SN DDMMN47C1SN
Note: *For 50 Ohm Coaxial substitute X for C. Example: DDMMV24X7SN
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and coaxial contact
removed for clarity
A
C
B
10°
ED
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
7,62 ± 0,25
(.300 ± .010)
Ø 0,76
(.030)
0,82
(.032)
3,45
(.136)
6,50 ± 0,25
(.256 ± .010)
2,92
(.115)
BOARDLOCK
0,62
(.024)
Ø 0,51
(.020)
2,54
(.100)
L
F
5,69
(.224)
2,84
(.112)
W
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 259.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate 50 Ohm coaxial configuration,
see page 225.
Dimensions are shown in mm (inch)
Dimensions subject to change
154
D Subminiature Military/High Reliability
40 A High Power 90°PCB (Sizes DE-DC)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMP5H1PJ DEMMC5H1PJ DEMMD5H1PJ DEMMG5H1PJ
DA 7W2 DAMMP7H2PJ DAMMC7H2PJ DAMMD7H2PJ DAMMG7H2PJ
DA 11W1 DAMMP11H1PJ DAMMC11H1PJ DAMMD11H1PJ DAMMG11H1PJ
DA 3W3 DAMMP3H3PJ DAMMC3H3PJ DAMMD3H3PJ DAMMG3H3PJ
DA 3WK3DAMMP3HK3PJTM DAMMC3HK3PJTM DAMMD3HK3PJTM DAMMG3HK3PJTM
DB 5W5 DBMMP5H5PJ DBMMC5H5PJ DBMMD5H5PJ DBMMG5H5PJ
DB 9W4 DBMMP9H4PJ DBMMC9H4PJ DBMMD9H4PJ DBMMG9H4PJ
DB 13W3 DBMMP13H3PJ DBMMC13H3PJ DBMMD13H3PJ DBMMG13H3PJ
DB 17W2 DBMMP17H2PJ DBMMC17H2PJ DBMMD17H2PJ DBMMG17H2PJ
DB 21W1 DBMMP21H1PJ DBMMC21H1PJ DBMMD21H1PJ DBMMG21H1PJ
DC 8W8 DCMMP8H8PJ DCMMC8H8PJ DCMMD8H8PJ DCMMG8H8PJ
DC 13W6 DCMMP13H6PJ DCMMC13H6PJ DCMMD13H6PJ DCMMG13H6PJ
DC 17W5 DCMMP17H5PJ DCMMC17H5PJ DCMMD17H5PJ DCMMG17H5PJ
DC 21WA4 DCMMP21HA4PJ DCMMC21HA4PJ DCMMD21HA4PJ DCMMG21HA4PJ
DC 25W3 DCMMP25H3PJ DCMMC25H3PJ DCMMD25H3PJ DCMMG25H3PJ
DC 27W2 DCMMP27H2PJ DCMMC27H2PJ DCMMD27H2PJ DCMMG27H2PJ
Notes: For DD shell size, see page 156.
Keyed
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 244-245.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Screw lock, boardlock, and signal contacts
removed for clarity
Engaging Face
Screw lock, boardlock, and high power contact
removed for clarity
AC
B
ED
Ø 0,76
(.030) Ø 3,18
(.125)
2,92
(.115)
BOARDLOCK 10°
12,34
(.486) 8,64
(.340)
6,50 ± 0,25
(.256 ± .010)
RIVNUT
#4-40 UNC
SCREW LOCK
#4-40 UNC
BRACKET,
METAL
3,89 (.153)
MIN.
20,57 ± 0,38
(.810 ±.015)
L
F
W
2,84
(.112)
11,53 ± 0,25
(.454 ± .010)
4,33 ± 0,38
(.170 ± .015)
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 155
D Subminiature Military/High Reliability
40 A High Power 90°PCB (Sizes DE-DC)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMP5H1SJ DEMMC5H1SJ DEMMD5H1SJ DEMMG5H1SJ
DA 7W2 DAMMP7H2SJ DAMMC7H2SJ DAMMD7H2SJ DAMMG7H2SJ
DA 11W1 DAMMP11H1SJ DAMMC11H1SJ DAMMD11H1SJ DAMMG11H1SJ
DA 3W3 DAMMP3H3SJ DAMMC3H3SJ DAMMD3H3SJ DAMMG3H3SJ
DA 3WK3DAMMP3HK3SJTM DAMMC3HK3SJTM DAMMD3HK3SJTM DAMMG3HK3SJTM
DB 5W5 DBMMP5H5SJ DBMMC5H5SJ DBMMD5H5SJ DBMMG5H5SJ
DB 9W4 DBMMP9H4SJ DBMMC9H4SJ DBMMD9H4SJ DBMMG9H4SJ
DB 13W3 DBMMP13H3SJ DBMMC13H3SJ DBMMD13H3SJ DBMMG13H3SJ
DB 17W2 DBMMP17H2SJ DBMMC17H2SJ DBMMD17H2SJ DBMMG17H2SJ
DB 21W1 DBMMP21H1SJ DBMMC21H1SJ DBMMD21H1SJ DBMMG21H1SJ
DC 8W8 DCMMP8H8SJ DCMMC8H8SJ DCMMD8H8SJ DCMMG8H8SJ
DC 13W6 DCMMP13H6SJ DCMMC13H6SJ DCMMD13H6SJ DCMMG13H6SJ
DC 17W5 DCMMP17H5SJ DCMMC17H5SJ DCMMD17H5SJ DCMMG17H5SJ
DC 21WA4 DCMMP21HA4SJ DCMMC21HA4SJ DCMMD21HA4SJ DCMMG21HA4SJ
DC 25W3 DCMMP25H3SJ DCMMC25H3SJ DCMMD25H3SJ DCMMG25H3SJ
DC 27W2 DCMMP27H2SJ DCMMC27H2SJ DCMMD27H2SJ DCMMG27H2SJ
Notes: For DD shell size, see page 157.
Keyed.
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 247-248.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
2,92
(.115)
Ø 0,76
(.030)
SCREW LOCK
#4-40 UNC
BRACKET,
METAL
RIVNUT
#4-40 UNC
12,34
(.486) 8,64
(.340)
6,50 ± 0,25
(.256 ± .010)
L
20,57 ± 0,38
(.810 ± .015)
3,89 (.153)
MIN.
4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
11,53 ± 0,25
(.454 ± .010)
WF
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
156
D Subminiature Military/High Reliability
40 A High Power 90°PCB (Size DD)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMP24H7PJ DDMMC24H7PJ DDMMD24H7PJ DDMMG24H7PJ
DD 36W4 DDMMP36H4PJ DDMMC36H4PJ DDMMD36H4PJ DDMMG36H4PJ
DD 43W2 DDMMP43H2PJ DDMMC43H2PJ DDMMD43H2PJ DDMMG43H2PJ
DD 47W1 DDMMP47H1PJ DDMMC47H1PJ DDMMD47H1PJ DDMMG47H1PJ
Plug
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
10°
C
A
ED
Ø3.18
(.125) Ø0,76
(.030)
2,92
(.115)
B
BOARDLOCK
13,74
(.541) 10,06
(.396)
6,50 ± 0,25
(.256 ± .010) SCREW LOCK
#4-40 UNC
RIVNUT
#4-40 UNC
BRACKET,
METAL
20,57 ± 0,38
(.810 ± .015)
3,89 (.153)
MIN
L
5,68
(.224) 4,33 ± 0,38
(.170 ± .015)
2,84
(.112)
F
W
11,53 ± 0,25
(.454 ± .010)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 246.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 157
D Subminiature Military/High Reliability
40 A High Power 90°PCB (Size DD)
Part Numbers with Metal Bracket and Rivnut #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
Without Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMP24H7SJ DDMMC24H7SJ DDMMD24H7SJ DDMMG24H7SJ
DD 36W4 DDMMP36H4SJ DDMMC36H4SJ DDMMD36H4SJ DDMMG36H4SJ
DD 43W2 DDMMP43H2SJ DDMMC43H2SJ DDMMD43H2SJ DDMMG43H2SJ
DD 47W1 DDMMP47H1SJ DDMMC47H1SJ DDMMD47H1SJ DDMMG47H1SJ
Receptacle
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
Screw lock, boardlock, and signal contacts
removed for clarity
Screw lock, boardlock, and high power contact
removed for clarity
Ø 0,76
(.030) Ø 3,18
(.125)
2,92
(.115)
D
BOARDLOCK 10°
A
C
B
E
13,74
(.541) 10,06
(.396)
6,50 ± 0,25
(.256 ± .010) SCREW LOCK
#4-40 UNC
RIVNUT
#4-40 UNC
BRACKET,
METAL
20,57 ± 0,38
(.810 ± .015)
L
3,89 (.153)
MIN
5,68
(.224)
2,84
(.112)
F
W
11,53 ± 0,25
(.454 ± .010)
4,33 ± 0,38
(.170 ± .015)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 249.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
ɀFor alternate bracket configuration (when
connectors are supplied without boardlocks),
see page 226.
Note: ɋDimension varies with alternate bracket configuration, see Reader’s Resource page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
158
D Subminiature Military/High Reliability
40 A High Power Straight PCB (Sizes DE-DC)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMV5H1PN DEMMZ5H1PN DEMMN5H1PN
DA 7W2 DAMMV7H2PN DAMMZ7H2PN DAMMN7H2PN
DA 11W1 DAMMV11H1PN DAMMZ11H1PN DAMMN11H1PN
DA 3W3 DAMMV3H3PN DAMMZ3H3PN DAMMN3H3PN
DA 3WK3DAMMV3HK3PNTM DAMMZ3HK3PNTM DAMMN3HK3PNTM
DB 5W5 DBMMV5H5PN DBMMZ5H5PN DBMMN5H5PN
DB 9W4 DBMMV9H4PN DBMMZ9H4PN DBMMN9H4PN
DB 13W3 DBMMV13H3PN DBMMZ13H3PN DBMMN13H3PN
DB 17W2 DBMMV17H2PN DBMMZ17H2PN DBMMN17H2PN
DB 21W1 DBMMV21H1PN DBMMZ21H1PN DBMMN21H1PN
DC 8W8 DCMMV8H8PN DCMMZ8H8PN DCMMN8H8PN
DC 13W6 DCMMV13H6PN DCMMZ13H6PN DCMMN13H6PN
DC 17W5 DCMMV17H5PN DCMMZ17H5PN DCMMN17H5PN
DC 21WA4 DCMMV21HA4PN DCMMZ21HA4PN DCMMN21HA4PN
DC 25W3 DCMMV25H3PN DCMMZ25H3PN DCMMN25H3PN
DC 27W2 DCMMV27H2PN DCMMZ27H2PN DCMMN27H2PN
Notes: For DD shell sizes, see page 160.
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Screw lock, boardlock and high power contact
removed for clarity
AC
B
ED
10°
SCREW LOCK
#4-40 UNC
4,65
(.183)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
Ø 3,18
(.125)
Ø 0,76
(.030) 4,52
(.178)
2,92
(.115)
BOARDLOCK
STANDOFF
#4-40 UNC WF
2,84
(.112)
L
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 254-255.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 159
D Subminiature Military/High Reliability
40 A High Power Straight PCB (Sizes DE-DC)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMV5H1SN DEMMZ5H1SN DEMMN5H1SN
DA 7W2 DAMMV7H2SN DAMMZ7H2SN DAMMN7H2SN
DA 11W1 DAMMV11H1SN DAMMZ11H1SN DAMMN11H1SN
DA 3W3 DAMMV3H3SN DAMMZ3H3SN DAMMN3H3SN
DA 3WK3DAMMV3HK3SNTM DAMMZ3HK3SNTM DAMMN3HK3SNTM
DB 5W5 DBMMV5H5SN DBMMZ5H5SN DBMMN5H5SN
DB 9W4 DBMMV9H4SN DBMMZ9H4SN DBMMN9H4SN
DB 13W3 DBMMV13H3SN DBMMZ13H3SN DBMMN13H3SN
DB 17W2 DBMMV17H2SN DBMMZ17H2SN DBMMN17H2SN
DB 21W1 DBMMV21H1SN DBMMZ21H1SN DBMMN21H1SN
DC 8W8 DCMMV8H8SN DCMMZ8H8SN DCMMN8H8SN
DC 13W6 DCMMV13H6SN DCMMZ13H6SN DCMMN13H6SN
DC 17W5 DCMMV17H5SN DCMMZ17H5SN DCMMN17H5SN
DC 21WA4 DCMMV21HA4SN DCMMZ21HA4SN DCMMN21HA4SN
DC 25W3 DCMMV25H3SN DCMMZ25H3SN DCMMN25H3SN
DC 27W2 DCMMV27H2SN DCMMZ27H2SN DCMMN27H2SN
Notes: For DD shell sizes, see page 161.
Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Screw lock, boardlock and high power contact
removed for clarity
AC
B
D
E
10°
4,65
(.183)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
Ø 3,18
(.125)
Ø 0,76
(.030)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
2,84
(.112)
LF
W
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 257-258.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
160
D Subminiature Military/High Reliability
40 A High Power Straight PCB (Size DD)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMV24H7PN DDMMZ24H7PN DDMMN24H7PN
DD 36W4 DDMMV36H4PN DDMMZ36H4PN DDMMN36H4PN
DD 43W2 DDMMV43H2PN DDMMZ43H2PN DDMMN43H2PN
DD 47W1 DDMMV47H1PN DDMMZ47H1PN DDMMN47H1PN
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Screw lock, boardlock, and high power contact
removed for clarity
AC
B
ED
10°
7,62 ± 0,25
(.300 ± .010)
Ø 0,76
(.030)
Ø 3,18
(.125)
6,50 ± 0,25
(.256 ± .010)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,65
(.183) 4,52
(.178)
STANDOFF
#4-40 UNC
5,69
(.224) 2,84
(.112)
LWF
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 256.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change 161
D Subminiature Military/High Reliability
40 A High Power Straight PCB (Size DD)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMV24H7SN DDMMZ24H7SN DDMMN24H7SN
DD 36W4 DDMMV36H4SN DDMMZ36H4SN DDMMN36H4SN
DD 43W2 DDMMV43H2SN DDMMZ43H2SN DDMMN43H2SN
DD 47W1 DDMMV47H1SN DDMMZ47H1SN DDMMN47H1SN
Receptacle
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Engaging Face
Screw lock, boardlock and high power contact
removed for clarity
A
C
B
ED
10°
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
Ø 3,18
(.125)
Ø 0,76
(.030)
4,65
(.183)
2,92
(.115)
BOARDLOCK
SCREW LOCK
#4-40 UNC
4,52 (.178)
STANDOFF
#4-40 UNC
5,69
(.224)
LWF
2,84
(.112)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 259.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Dimensions are shown in mm (inch)
Dimensions subject to change
162
D Subminiature Military/High Reliability
High Voltage Straight PCB (Sizes DE-DC)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMV5V1PN DEMMZ5V1PN DEMMN5V1PN
DA 7W2 DAMMV7V2PN DAMMZ7V2PN DAMMN7V2PN
DA 11W1 DAMMV11V1PN DAMMZ11V1PN DAMMN11V1PN
DA 3W3 DAMMV3V3PN DAMMZ3V3PN DAMMN3V3PN
DA 3WK3DAMMV3VK3PNTM DAMMZ3VK3PNTM DAMMN3VK3PNTM
DB 5W5 DBMMV5V5PN DBMMZ5V5PN DBMMN5V5PN
DB 9W4 DBMMV9V4PN DBMMZ9V4PN DBMMN9V4PN
DB 13W3 DBMMV13V3PN DBMMZ13V3PN DBMMN13V3PN
DB 17W2 DBMMV17V2PN DBMMZ17V2PN DBMMN17V2PN
DB 21W1 DBMMV21V1PN DBMMZ21V1PN DBMMN21V1PN
DC 8W8 DCMMV8V8PN DCMMZ8V8PN DCMMN8V8PN
DC 13W6 DCMMV13V6PN DCMMZ13V6PN DCMMN13V6PN
DC 17W5 DCMMV17V5PN DCMMZ17V5PN DCMMN17V5PN
DC 21WA4 DCMMV21VA4PN DCMMZ21VA4PN DCMMN21VA4PN
DC 25W3 DCMMV25V3PN DCMMZ25V3PN DCMMN25V3PN
DC 27W2 DCMMV27V2PN DCMMZ27V2PN DCMMN27V2PN
Notes: For DD shell size, see page 164.
Keyed.
Dimensions
Plug
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,37 (.015) W
±0,41 (.016) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,69 (.264) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Hardware and high voltage contact
removed for clarity
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see pages 254-255.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
10°
A
C
ED
B
4,52
(.178)
7,62 ± 0,25
(.300 ± .010)
Ø 0,76
(.030)
BOARDLOCK
2,92
(.115)
6,50 ± 0,25
(.256 ± .010) SCREW LOCK
#4-40 UNC
STANDOFF
#4-40 UNC F
W
2,84
(.112)
L
Dimensions are shown in mm (inch)
Dimensions subject to change 163
D Subminiature Military/High Reliability
High Voltage Straight PCB (Sizes DE-DC)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DE 5W1 DEMMV5V1SN DEMMZ5V1SN DEMMN5V1SN
DA 7W2 DAMMV7V2SN DAMMZ7V2SN DAMMN7V2SN
DA 11W1 DAMMV11V1SN DAMMZ11V1SN DAMMN11V1SN
DA 3W3 DAMMV3V3SN DAMMZ3V3SN DAMMN3V3SN
DA 3WK3DAMMV3VK3SNTM DAMMZ3VK3SNTM DAMMN3VK3SNTM
DB 5W5 DBMMV5V5SN DBMMZ5V5SN DBMMN5V5SN
DB 9W4 DBMMV9V4SN DBMMZ9V4SN DBMMN9V4SN
DB 13W3 DBMMV13V3SN DBMMZ13V3SN DBMMN13V3SN
DB 17W2 DBMMV17V2SN DBMMZ17V2SN DBMMN17V2SN
DB 21W1 DBMMV21V1SN DBMMZ21V1SN DBMMN21V1SN
DC 8W8 DCMMV8V8SN DCMMZ8V8SN DCMMN8V8SN
DC 13W6 DCMMV13V6SN DCMMZ13V6SN DCMMN13V6SN
DC 17W5 DCMMV17V5SN DCMMZ17V5SN DCMMN17V5SN
DC 21WA4 DCMMV21VA4SN DCMMZ21VA4SN DCMMN21VA4SN
DC 25W3 DCMMV25V3SN DCMMZ25V3SN DCMMN25V3SN
DC 27W2 DCMMV27V2SN DCMMZ27V2SN DCMMN27V2SN
Notes: For DD shell size, see page 165.
Keyed.
Dimensions
Receptacle
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Hardware and high voltage contact
removed for clarity.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see pages 257-258.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
10°
AC
ED
B
6,50 ± 0,25
(.256 ± .010)
7,62 ± 0,25
(.300 ± .010)
STANDOFF
#4-40 UNC
SCREW LOCK
#4-40 UNC
BOARDLOCK
4,52
(.178)
2,92
(.115)
Ø 0,76
(.030)
WF
2,84
(.112)
L
Dimensions are shown in mm (inch)
Dimensions subject to change
164
D Subminiature Military/High Reliability
High Voltage Straight PCB (Size DD)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMV24V7PN DDMMZ24V7PN DDMMN24V7PN
DD 36W4 DDMMV36V4PN DDMMZ36V4PN DDMMN36V4PN
DD 43W2 DDMMV43V2PN DDMMZ43V2PN DDMMN43V2PN
DD 47W1 DDMMV47V1PN DDMMZ47V1PN DDMMN47V1PN
Dimensions
Plug
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,41 (.016) L
±0,25 (.010)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039)
Plug
Engaging Face
Hardware and high voltage contact
removed for clarity.
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor P.C. hole patterns, see page 256.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
10°
A
C
ED
B
SCREW LOCK
#4-40 UNC
7,62 ± 0,25
(.300 ± .010)
Ø 0,76
(.030)
STANDOFF
#4-40 UNC
BOARDLOCK 4,52
(.178)
2,92
(.115)
6,50 ± 0,25
(.256 ± .010)
5,69
(.224) 2,84
(.112)
LF
W
Dimensions are shown in mm (inch)
Dimensions subject to change 165
D Subminiature Military/High Reliability
High Voltage Straight PCB (Size DD)
Part Numbers with Standoff #4-40 UNC
Shell Size Layout
Part Number
Without Screw Locks
Without Boardlocks
Part Number
Without Screw Locks
With Boardlocks
Part Number
With Screw Locks
With Boardlocks
DD 24W7 DDMMV24V7SN DDMMZ24V7SN DDMMN24V7SN
DD 36W4 DDMMV36V4SN DDMMZ36V4SN DDMMN36V4SN
DD 43W2 DDMMV43V2SN DDMMZ43V2SN DDMMN43V2SN
DD 47W1 DDMMV47V1SN DDMMZ47V1SN DDMMN47V1SN
Dimensions
Receptacle
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030)
Receptacle
Engaging Face
Hardware and high voltage contacts
removed for clarity
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor P.C. hole patterns, see page 259.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
A
C
ED
B
10°
Ø 0,76
(.030)
SCREW LOCK
#4-40 UNC
BOARDLOCK
2,92
(.115)
7,62 ± 0,25
(.300 ± .010)
6,50 ± 0,25
(.256 ± .010)
STANDOFF
#4-40 UNC
4,52
(.178) 5,69
(.224) 2,84
(.112)
LF
W
Dimensions are shown in mm (inch)
Dimensions subject to change
166
D Subminiature Military/High Reliability
Cable Solder Cup
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount Clinch Nut
#4-40 UNC
DE 5W1 DEMM5W1P DEMMY5W1P DEMME5W1P
DA 7W2 DAMM7W2P DAMMY7W2P DAMME7W2P
DA 11W1 DAMM11W1P DAMMY11W1P DAMME11W1P
DA 3W3 DAMM3W3P DAMMY3W3P DAMME3W3P
DA 3WK3DAMM3WK3P DAMMY3WK3P DAMME3WK3P
DB 5W5 DBMMP5W5P DBMMY5W5P DBMME5W5P
DB 9W4 DBMM9W4P DBMMY9W4P DBMME9W4P
DB 13W3 DBMM13W3P DBMMY13W3P DBMME13W3P
DB 17W2 DBMM17W2P DBMMY17W2P DBMME17W2P
DB 21W1 DBMM21W1P DBMMY21W1P DBMME21W1P
DC 8W8 DCMM8W8P DCMMY8W8P DCMME8W8P
DC 13W6 DCMM13W6P DCMMY13W6P DCMME13W6P
DC 17W5 DCMM17W5P DCMMY17W5P DCMME17W5P
DC 21WA4 DCMM21WA4P DCMMY21WA4P DCMME21WA4P
DC 25W3 DCMM25W3P DCMMY25W3P DCMME25W3P
DC 27W2 DCMM27W2P DCMMY27W2P DCMME27W2P
DD 24W7 DDMM24W7P DDMMY24W7P DDMME24W7P
DD 36W4 DDMM36W4P DDMMY36W4P DDMME36W4P
DD 43W2 DDMM43W2P DDMMY43W2P DDMME43W2P
DD 47W1 DDMM47W1P DDMMY47W1P DDMME47W1P
Note: Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Engaging Face DD Configuration
10°
ED
A
BØ 3,05
(.120)
C
10,72 (.422)
MAX
L
K
2,84
(.112)
5,69
(.224)
F
W
2,84
(.112)
Dimensions are shown in mm (inch)
Dimensions subject to change 167
D Subminiature Military/High Reliability
Cable Solder Cup
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount Clinch Nut
#4-40 UNC
DE 5W1 DEMM5W1S DEMMY5W1S DEMME5W1S
DA 7W2 DAMM7W2S DAMMY7W2S DAMME7W2S
DA 11W1 DAMM11W1S DAMMY11W1S DAMME11W1S
DA 3W3 DAMM3W3S DAMMY3W3S DAMME3W3S
DA 3WK3DAMM3WK3S DAMMY3WK3S DAMME3WK3S
DB 5W5 DBMM5W5S DBMMY5W5S DBMME5W5S
DB 9W4 DBMM9W4S DBMMY9W4S DBMME9W4S
DB 13W3 DBMM13W3S DBMMY13W3S DBMME13W3S
DB 17W2 DBMM17W2S DBMMY17W2S DBMME17W2S
DB 21W1 DBMM21W1S DBMMY21W1S DBMME21W1S
DC 8W8 DCMM8W8S DCMMY8W8S DCMME8W8S
DC 13W6 DCMM13W6S DCMMY13W6S DCMME13W6S
DC 17W5 DCMM17W5S DCMMY17W5S DCMME17W5S
DC 21WA4 DCMM21WA4S DCMMY21WA4S DCMME21WA4S
DC 25W3 DCMM25W3S DCMMY25W3S DCMME25W3S
DC 27W2 DCMM27W2S DCMMY27W2S DCMME27W2S
DD 24W7 DCMM24W7S DCMMY24W7S DCMME24W7S
DD 36W4 DCMM36W4S DCMMY36W4S DCMME36W4S
DD 43W2 DCMM43W2S DCMMY43W2S DCMME43W2S
DD 47W1 DCMM47W1S DCMMY47W1S DCMME47W1S
Note: Keyed.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.123) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face DD Configuration
A
C
B
ED
Ø 3,05
(.120)
10°
9,91 (.390)
MAX
K
L
5,69
(.224) 2,84
(.112)
2,84 (.112)
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change
168
D Subminiature Space/High Reliability
Selection Index Page
Space/High Reliability
An Introduction.......................................................169
Standard Layout Connectors
Straight PC Tail .....................................................172
90°PC Tail with Plastic Bracket .........................................174
Solder Cup.........................................................180
D*MA Crimp Contact Cable Connectors
Standard Density ....................................................182
High Density........................................................184
Contact Cavity Arrangements — High Density ...............................186
Crimp Contacts and Tooling .............................................187
Combo DLayout Solder Cup Connector ...................................188
Cable (Size 8) Loose Contacts
Coaxial 50 Ohm — Straight Crimp or Solder Braid ...........................190
High Power — Solder or Crimp and Tooling ................................191
Accessories
Metal Backshells ....................................................192
Screw Lock Assemblies...............................................194
NASA/GSFC Cross Reference ............................................195
ESA-SCC Cross Reference ..............................................196
Dimensions are shown in mm (inch)
Dimensions subject to change 169
D Subminiature Space/High Reliability
ITT Cannon has a long history of providing
high performance D Subminiature connectors
for space applications (qualified by NASA/
GFSC and the European Space Agency). Space/
High Reliabilty D*M and D*MA connectors meet
stringent tests for outgassing and residual
magnetism and are suitable for use in space,
medical, and high performance military/aerospace
applications. D*M and D*MA connectors meet the
performance and dimensional requirements of
MIL-C-24308. The newest product group is High
Density D*MA crimp connectors.
Applications
ɀSpace - Low/High Orbit Satellites
ɀMedical
Product Features
ɀNon-Magnetic ɀNo Outgassing
Specifications
Temperature Rating 65°at 125°C
Signal Contact Current Rating 5 A (20 AWG)
Signal Contact Resistance 55 millivolt max. at 7.5 A test current
Wire Accommodation (Solder) 20 AWG max.
Wire Accommodation (Crimp) 18/30 AWG
Coaxial Impedance 50 Ohm
Loss VSWR Less than 1,3 - 1,0 up to 500 Mhz
Coaxial Insertion Loss 1db loss at 500 Mhz
Dimensions are shown in mm (inch)
Dimensions subject to change
170
Dielectric Withstanding Voltage
Altitude (meter/feet)
Sea Level Sea Level 6 096/20 000 6 096/20 000 15 240/50 000 15 240/50 000 21 336/70 000 21 336/70 000
Average Flashover 1500/1700 1500/1700 1000/1000 1000/1000 500/650 500/650 500/500 500/500
Test 1000/1250 1000/1250 650/750 650/750 325/475 325/475 325/375 325/375
Type of Contact 90°Straight 90°Straight 90°Straight 90°Straight
Center Conductor
to Coaxial Shell Average
Flashover Test 1200 1500 900 1000 600 700 400 500
800 1000 600 550 400 475 275 325
Coaxial Shell to Nearest
Solder Cup Contact Average
Flashover Test 1500 1500 900 650
1000 1000 800 425
High Power Contact and/or
Coaxial Shell to Plug Shell Average
Flashover Test 1500 1500 1000 1000 500 500 500 500
1000 1000 650 650 325 325 325 325
Size 20 Signal Contact Average
Flashover Test 1200 1200 1000 1000 650 650 500 500
1250 1250 750 750 475 475 375 375
All voltage figures are rms AC 60 rms cps. Measured at approximately +25°C, 50% rh. For additional performance specifications refer to MIL-C-24308.
Residual Magnetism Level
Residual Magnetism Suffix Code
20 000 Gamma NM
200 Gamma NMB
Note: NMC is available by special request. Consult factory for details.
D Subminiature Space/High Reliability
Dimensions are shown in mm (inch)
Dimensions subject to change 171
D Subminiature Space/High Reliability
Materials and Finishes
Connector Assembly (Shells — Yellow Chromate over Cadmium)
Description Material Finish
Shell Brass per QQ-B-613 Yellow chromate over cadmium
QQ-P-416, Type II, Class 2
Insulator Diallyl Phthalate glass-filled
per MIL-M-14, type SDG-F,
Color: White (or functional
equivalent polyester)*
None
Contact Copper alloy Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Float Mount,
Brackets, Captive Nuts
Hardware
Brass Yellow chromate over cadmium
QQ-P-416, Type II, Class 2
Connector Assembly (Shells — Gold over Copper — K52)
Shell Brass per QQ-B-613 Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Insulator Diallyl Phthalate glass-filled
per MIL-M-14, type SDG-F,
Color: White (or functional
equivalent polyester)*
None
Contact Copper alloy Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Float Mount,
Brackets, Captive Nuts
Hardware
Brass Gold
Coaxial/High Power Contact Assemblies
Outer Coaxial Shell Copper alloy Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Center Coaxial Contact Copper alloy Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
Insulator (Coaxial Only) Teflon None
Retaining Ring Copper alloy Gold
High Power Contact Copper alloy Gold 50 microinches min.
thickness per MIL-G-45204, Type II,
Class 1 over copper per MIL-C-14550
* Pending qualification
Dimensions are shown in mm (inch)
Dimensions subject to change
172
D Subminiature Space/High Reliability
Straight PC Tail
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 275.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 9 DEM9POL3NM* DEMY9POL3NM*
DA 15 DAM15POL3NM* DAMY15POL3NM*
DB 25 DBM25POL3NM* DBMY25POL3NM*
DC 37 DCM37POL3NM* DCMY37POL3NM*
DD 50 DDM50POL3NM* DDMY50POL3NM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9POL3NMB
For shells with 50 microinches gold, add K52. Example: DEM9POL3NMK52
For alternate PC tail modifiers (see tabulation), replace OL3 with M or Z. Example: DEM9PZNM
Dimensions
ABCDEFWWKKL
Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,368 (.0145) ±0,41 (.016) ±0,317 (.0125) ±0,25 (.010) ±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (0.39)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Engaging Face DD Configuration
A
B
C
10°
ED
Ø 3,05
(.120)
X
Ø Y
2,84
(.112)
5,69
(.224)
L
K
PC Tail
Modifiers X WY
M 4,01 ±0,69
(.158 ±.027) 0,76 ±0,08
(.030 ±.003)
Z 4,65 ±0,69
(.183 ±.027) 0,76 ±0,08
(.030 ±.003)
OL3 4,20 ±1,10
(.185 ±.043) 0,60 ±0,08
(.023 ±.003)
Dimensions are shown in mm (inch)
Dimensions subject to change 173
D Subminiature Space/High Reliability
Straight PC Tail
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 275.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 9 DEM9SOL3NM* DEMY9SOL3NM*
DA 15 DAM15SOL3NM* DAMY15SOL3NM*
DB 25 DBM25SOL3NM* DBMY25SOL3NM*
DC 37 DCM37SOL3NM* DCMY37SOL3NM*
DD 50 DDM50SOL3NM* DDMY50SOL3NM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SOL3NMB
For shells with 50 microinches gold, add K52. Example: DEM9SOL3NMK52
For alternate PC tail modifiers (see tabulation), replace OL3 with M or Z. Example: DEM9SZNM
PC Tail
Modifiers X WY
M 4,01 ±0,69
(.158 ±.027) 0,76 ±0,08
(.030 ±.003)
Z 4,65 ±0,69
(.183 ±.027) 0,76 ±0,08
(.030 ±.003)
OL3 4,20 ±1,10
(.185 ±.043) 0,60 ±0,08
(.023 ±.003)
Dimensions
ABCDEFWKL
Shell Size ±0,38 (.015) ±0,13 (.005) ±0,13 (.005) ±0,13 (.005) ±0,38 (.015) ±0,25 (.010) ±0,38 (.015) ±0,318 (.0125) ±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face
DD Configuration
A
B
C
10°
ED
Ø 3,05
(.120)
Ø Y
X
2,84
(.112)
5,69
(.224)
L
K
2,84
(.112)
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change
174
D Subminiature Space/High Reliability
90°PC Tail with Plastic Bracket
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
Part Numbers
Shell Size Layout Part Number
DE 9 DEM9PLNM*
DA 15 DAM15PLNM*
DB 25 DBM25PLNM*
DC 37 DCM37PLNM*
DD 50 DDM50PLNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PLNMB
For shells with 50 microinches gold, add K52. Example: DEM9PLNMK52
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010) M
±0,25 (.010) N
±0,13 (.005)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,30 (.484) 8,64 (.340)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,30 (.484) 8,64 (.340)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) 15,09 (.594) 10,04 (.395)
Engaging Face DD Configuration
A
C
B
ED
10°Ø 0,76 (.030)
MN
Ø 3,05
(.120)
2,84
(.112)
7,18 ± 0,25
(.283 ± .010)
5,68
(.224)
L
4,01 ± 0,69
(.158 ± .027)
2,84
(.112)
F
W
7,18 ± 0,25
(.283 ± .010)
4,01 ± 0,69
(.158 ± .027)
Dimensions are shown in mm (inch)
Dimensions subject to change 175
D Subminiature Space/High Reliability
90°PC Tail with Plastic Bracket
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 272.
ɀFor panel cutouts, see page 221.
Part Numbers
Shell Size Layout Part Number
DE 9 DEM9SLNM*
DA 15 DAM15SLNM*
DB 25 DBM25SLNM*
DC 37 DCM37SLNM*
DD 50 DDM50SLNM*
Notes: * For Residual Magnetism Levels of 200 gamma, add B. Example: DEM9SLNMB
For shells with 50 microinches gold, add K52. Example: DEM9SLNMK52
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010) M
±0,25 (.010) N
±0,13 (.005)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,30 (.484) 8,64 (.340)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 15,09 (.594) 10,04 (.395)
Engaging Face DD Configuration
D
A
C
B
E
10°Ø 0,76 (.030)
Ø 3,05
(.120)
N
M
4,01 ± 0,69
(.158 ± .027)
2,84
(.112)
5,68
(.224)
7,18 ± 0,25
(.283 ± .010) L
2,84
(.112)
F
W
7,18 ± 0,25
(.283 ± .010)
4,01 ± 0,69
(.158 ± .027)
Dimensions are shown in mm (inch)
Dimensions subject to change
176
D Subminiature Space/High Reliability
90°Solder Contact PCB Connector — European Footprint
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual Float Mount
DE 9 DEM9PNM*1AON DEMY9PNM*1AON
DA 15 DAM15PNM*1AON DAMY15PNM*1AON
DB 25 DBM25PNM*1AON DBMY25PNM*1AON
DC 37 DCM37PNM*1AON DCMY37PNM*1AON
DD 50 DDM50PNM*1AON DDMY50PNM*1AON
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB1AON
For shells with 50 microinches gold, add K52. DEM9PNM1AONK52
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD ConfigurationEngaging Face
10°
AC
ED
B
Ø 0,60
(.024)
Ø 3,05
(.120)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008) K
L
5,08
(.200)
5,00
(.197)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
WF
5,00
(.197)
Dimensions are shown in mm (inch)
Dimensions subject to change 177
D Subminiature Space/High Reliability
90°Solder Contact PCB Connector — European Footprint
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual Float Mount
DE 9 DEM9SNM*1AON DEMY9SNM*1AON
DA 15 DAM15SNM*1AON DAMY15SNM*1AON
DB 25 DBM25SNM*1AON DBMY25SNM*1AON
DC 37 DCM37SNM*1AON DCMY37SNM*1AON
DD 50 DDM50SNM*1AON DDMY50SNM*1AON
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB1AON
For shells with 50 microinches gold, add K52. Example: DEM9SNM1AONK52
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD ConfigurationEngaging Face
10°
AC
ED
B
Ø 0,60
(.024)
Ø 3,05
(.120)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008) K
L
5,08
(.200)
5,00
(.197)
2,54
(.100)
9,40 ± 0,20
(.370 ± .008)
WF
5,00
(.197)
Dimensions are shown in mm (inch)
Dimensions subject to change
178
D Subminiature Space/High Reliability
90°Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍor 9,4ɍɍ mm
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Engaging Face DD Configuration
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0.38 (.015) F
±0.25 (.010) W
±0,368 (.0145) W
±0,41 (.016) L
±0,25 (.010) N
±0,15 (.006)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 10,7 (.42)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 0,76 (.030) 10,7 (.42)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 10,7 (.42)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 0,99 (.039) 10,7 (.42)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) 12,1 (.48)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
C
B
10°
A
D
Ø 0,60 (.024)
E
1,00
(.039)
L
5,08 (.200)
2,54 (.100)
9,40 (.370)
3,70 (.146)
2,54 (.100)
9,40 (.370) WF
3,70 (.146)
Part Numbers
Shell Size Layout Metal Bracket
Threaded Insert #4-40 Metal Bracket
Threaded Insert M3
DE 9 DEM9PNM*1A7N DEM9PNM*1A9N
DA 15 DAM15PNM*1A7N DAM15PNM*1A9N
DB 25 DBM25PNM*1A7N DBM25PNM*1A9N
DC 37 DCM37PNM*1A7N DCM37PNM*1A9N
DD 50 DDM50PNM*1A7N DDM50PNM*1A9N
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB1A7N
For shells with 50 microinches gold, add K52. Example: DEM9PNM1A7NK52
Dimensions are shown in mm (inch)
Dimensions subject to change 179
D Subminiature Space/High Reliability
90°Solder Termination (Machined) with Metal Bracket — European Footprint 10,2ɍor 9,4ɍɍ mm
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor P.C. hole patterns, see page 273.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (European),
see page 227.
Engaging Face DD Configuration
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) L
±0,25 (.010) N
±0,15 (.006)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 10,7 (.42)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 10,7 (.42)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 10,7 (.42)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 10,7 (.42)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,1 (.48)
ɍConnector footprint measured from the front shell.
ɍɍ Connector footprint measured from the rear shell.
Part Numbers
Shell Size Layout Metal Bracket
Threaded Insert #4-40 Metal Bracket
Threaded Insert M3
DE 9 DEM9SNM*1A7N DEM9SNM*1A9N
DA 15 DAM15SNM*1A7N DAM15SNM*1A9N
DB 25 DBM25SNM*1A7N DBM25SNM*1A9N
DC 37 DCM37SNM*1A7N DCM37SNM*1A9N
DD 50 DDM50SNM*1A7N DDM50SNM*1A9N
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB1A7N
For shells with 50 microinches gold, add K52. Example: DEM9SNM1A7NK52
C
B
A
D
E
10°
Ø 0,60 (.024)
1,00
(.039)
5,08 (.200)
2,54 (.100)
9,40 (.370) L
3,70 (.146)
2,54 (.100)
WF
9,40 (.370)
3,70 (.146)
Dimensions are shown in mm (inch)
Dimensions subject to change
180
D Subminiature Space/High Reliability
Solder Cup
Plug Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 9 DEM9PNM* DEMY9PNM*
DA 15 DAM15PNM * DAMY15PNM *
DB 25 DBM25PNM * DBMY25PNM *
DC 37 DCM37PNM * DCMY37PNM *
DD 50 DDM50PNM * DDMY50PNM *
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9PNMB
For shells with 50 microinches gold, add K52. Example: DEM9PNMK52
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0.76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Engaging Face DD Configuration
A
C
B
ED
10°
Ø 3,05
(.120)
10,72 (.422)
MAX
5,69
(.224) 2,84
(.112)
L
K
2,84
(.112)
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change 181
D Subminiature Space/High Reliability
Solder Cup
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 9 DEM9SNM* DEMY9SNM*
DA 15 DAM15SNM* DAMY15SNM*
DB 25 DBM25SNM* DBMY25SNM*
DC 37 DCM37SNM* DCMY37SNM*
DD 50 DDM50SNM* DDMY50SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM9SNMB
For shells with 50 microinches gold, add K52. Example: DEM9SNMK52
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face DD Configuration
A
C
B
ED
10°
Ø 3,05
(.120)
5,69
(.224) 2,84
(.112)
L
K
2,84
(.112)
F
W
9,91 (.390)
MAX
Dimensions are shown in mm (inch)
Dimensions subject to change
182
D Subminiature Space/High Reliability
D*MA Standard Density Crimp Contact Cable Connector
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 9 DEMA9PNM* DEMAY9PNM*
DA 15 DAMA15PNM* DAMAY15PNM*
DB 25 DBMA25PNM* DBMAY25PNM*
DC 37 DCMA37PNM* DCMAY37PNM*
DD 50 DDMA50PNM* DDMAY50PNM*
Notes: *For Residual Magnetism Level of 200 gamma, add B. Example: DEMA9PNMB
For shells with 50 microinches gold, add K52. Example: DEMA9PNMK52
For connectors without contacts, add F0. Example: DEMA9PNMF0 (F0 not marked on the connector)
For crimp (Size 20) contacts and tooling, see pages 187 & 275
Dimensions
Shell Size
A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Engaging Face
10°
D
E
C
B
A
Ø 3,05 (.120)
8,76 (.345) MAX
L
K
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change 183
D Subminiature Space/High Reliability
D*MA Standard Density Crimp Contact Cable Connector
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 224.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 9 DEMA9SNM* DEMAY9SNM*
DA 15 DAMA15SNM* DAMAY15SNM*
DB 25 DBMA25SNM* DBMAY25SNM*
DC 37 DCMA37SNM* DCMAY37SNM*
DD 50 DDMA50SNM* DDMAY50SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA9SNMB
For shells with 50 microinches gold, add K52. Example: DEMA9SNMK52
For connectors without contacts, add F0. Example: DEMA9SNMF0 (F0 not marked on the connector)
For crimp (Size 20) contacts and tooling, see pages 187 & 275.
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face
10°
E
C
B
A
D
Ø 3,05 (.120)
8,76 (.345) MAX
LF
W
K
Dimensions are shown in mm (inch)
Dimensions subject to change
184
D Subminiature Space/High Reliability
D*MA High Density Crimp Contact Cable Connector
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 186.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard)
see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 15 DEMA15PNM* DEMAY15PNM*
DA 26 DAMA26PNM* DAMAY26PNM*
DB 44 DBMA44PNM* DBMAY44PNM*
DC 62 DCMA62PNM* DCMAY62PNM*
DD 78 DDMA78PNM* DDMAY78PNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA15PNMB
For shells with 50 microinches gold, add K52. Example: DEMA15PNMK52
For connectors without contacts, add F0. Example: DEMA15PNMF0 (F0 not marked on connector)
For crimp (Size 22) contacts and tooling, see pages 187 & 275
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face
A
C
B
10°
ED
Ø 3,05 (.120)
8,76 (.345) MAX
F
W
L
K
Dimensions are shown in mm (inch)
Dimensions subject to change 185
D Subminiature Space/High Reliability
D*MA High Density Crimp Contact Cable Connector
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 186.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard)
see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 15 DEMA15SNM* DEMAY15SNM*
DA 26 DAMA26SNM* DAMAY26SNM*
DB 44 DBMA44SNM* DBMAY44SNM*
DC 62 DCMA62SNM* DCMAY62SNM*
DD 78 DDMA78SNM* DDMAY78SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEMA15SNMB
For shells with 50 microinches gold, add K52. Example: DEMA15SNMK52
For connectors without contacts, add F0. Example: DEMA15SNMF0 (F0 not marked on the connector)
For crimp (Size 22) contacts and tooling, see pages 187 & 275
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Engaging Face
A
C
B
10°
ED
Ø 3,05 (.120)
8,76 (.345) MAX
F
W
L
K
Dimensions are shown in mm (inch)
Dimensions subject to change
186
D Subminiature Space/High Reliability
Plug Contact Cavity Arrangements — High Density
Face View Pin Insert
15
610
11 15
19
10 18
19 26
115
16 30
31 44
121
42
62
22
43
1 20
21 39
59
78
40
60
Shell Size
Contact Arrangement
Contact Size
E
15
#22
A
26
#22
B
44
#22
Shell Size
Contact Arrangement
Contact Size
C
62
#22
D
78
#22
Receptacle Contact Cavity Arrangements — High Density
Face View Socket Insert
15
10 6
15 11
19
18 10
1926
115
30 16
44 31
121
2242
4362
120
21
39
4059
6078
Shell Size
Contact Arrangement
Contact Size
E
15
#22
A
26
#22
B
44
#22
Shell Size
Contact Arrangement
Contact Size
C
62
#22
D
78
#22
Dimensions are shown in mm (inch)
Dimensions subject to change 187
D Subminiature Space/High Reliability
Crimp Contacts
Pin
Contact Size Wire Size AWG Pin
Part Number
20 20, 22, 24 030-8882-002
20-18 1 #18, 20 or 2 #20 330-8782-001
20-26 26, 28, 30 030-8848-020
22D 22, 24, 26, 28 330-8944-001
Socket
Contact Size Wire Size AWG Socket
Part Number
20 20, 22, 24 031-8944-000
20-18 1 #18, 20 or 2 #20 031-8843-001
20-26 26, 28, 30 031-8787-020
22D 22, 24, 26, 28 031-8902-001
Insertion/Extraction Tools
CIET-20HD
Contact
Size Wire Size
AWG Plastic Insertion/Extraction Plastic Extraction
Part Number Description Part Number Description
20 20, 22, 24 980-2000-426 CIET-20HD 323-7010-000 CET-20-11
2026 26, 28, 30 980-2000-426 CIET-20HD 323-7010-000 CET-20-11
2018 1 #18 274-5016-002 CET-20-15
2 #22 274-5016-002 CET-20-15
22D 22, 24, 26, 28 274-7048-000 CIET-22D
High Power 12, 16 274-7003-000 CIET-12
Hand Crimp Tools
M22520/2-01
Contact
Size Wire Size
AWG Crimp Tool Locator
Part Number Description Part Number Description
995-0001-584 M22520/2-01 995-0001-604 M22520/2-08
20 20, 22, 24 995-0001-585 M22520/1-01 995-0001-244 TH25
2026 26, 28, 30 995-0001-584 M22520/2-01 995-0001-325 L3198-20HD
2018 1 #18
2 #22 995-0001-584 M22520/2-01 980-0005-722 K250
22D 22, 24, 26, 28 995-0001-584 M22520/2-01 995-0001-739 M22520/2-06
CBT-646 Vibra-Bowl Crimper
CBT-646 The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is
designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and
commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is
actuated automatically upon insertion of a pre-stripped stranded or single conductor wire.
Machine Crimp Rate: 1300+per hour
Power Requirements: Electrical =115 VAC, 60 Hz, 5 A
Pneumatic =85 psi, 2 cu. ft. per min.
Products: D*MA
Dimensions are shown in mm (inch)
Dimensions subject to change
187
ytilibaileR hgiH/ecapSerutainimbuS D
Crimp Contacts
Pin
GWA eziS eriWeziS tcatnoC
Pin
Part Number
200-2888-03042 ,22 ,0202
100-2878-03302# 2 ro 02 ,81# 181-02
020-8488-03003 ,82 ,6262-02
100-4498-03382 ,62 ,42 ,22D22
Socket
GWA eziS eriWeziS tcatnoC
Socket
Part Number
000-4498-13042 ,22 ,0202
100-3488-13002# 2 ro 02 ,81# 181-02
020-7878-13003 ,82 ,6262-02
100-2098-13082 ,62 ,42 ,22D22
Insertion/Extraction Tools
CIET-20HD
Contact
Size
Wire Size
AWG
Plastic Insertion/Extraction Plastic Extraction
Part Number Description Part Number Description
20 20, 22, 24 980-2000-426 CIET-20HD 323-7010-000 CET-20-11
2026 26, 28, 30 980-2000-426 CIET-20HD 323-7010-000 CET-20-11
2018
1 #18 274-5016-002 CET-20-11
2 #22 274-5016-002 CET-20-11
22D 22, 24, 26, 28 274-7048-000 CIET-22D
High Power 12, 16 274-7003-000 CIET-12
Hand Crimp Tools
M22520/2-01
Contact
Size
Wire Size
AWG
rotacoLlooT pmirC
Part Number Description Part Number Description
995-0001-584 M22520/2-01 995-0001-604 M22520/2-08
20 20, 22, 24 995-0001-585 M22520/1-01 995-0001-244 TH25
2026 26, 28, 30 995-0001-584 M22520/2-01 995-0001-325 L3198-20HD
2018 1 #18
2 #22 995-0001-584 M22520/2-01 980-0005-722 K250
22D 22, 24, 26, 28 995-0001-584 M22520/2-01 995-0001-739 M22520/2-06
CBT-646 Vibra-Bowl Crimper
CBT-646 The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is
designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and
commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is
actuated automatically upon insertion of a pre-stripped stranded or single conductor wire.
Machine Crimp Rate: 1300+per hour
Power Requirements: Electrical=115 VAC, 60 Hz, 5 A
Pneumatic=85 psi, 2 cu. ft. per min.
Products: D*MA
Dimensions are shown in mm (inch)
Dimensions subject to change
188
D Subminiature Space/High Reliability
Solder Cup
Plug
Reader’s Resource
ɀFor contact cavity arrangements,
see page 222.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 5W1 DEM5W1PNM* DEMY5W1PNM*
DA 7W2 DAM7W2PNM* DAMY7W2PNM*
DA 11W1 DAM11W1PNM* DAMY11W1PNM*
DA 3W3 DAM3W3PNM* DAMY3W3PNM*
DA 3WK3DAM3WK3PNM* DAMY3WK3PNM*
DB 5W5 DBMP5W5PNM* DBMY5W5PNM*
DB 9W4 DBM9W4PNM* DBMY9W4PNM*
DB 13W3 DBM13W3PNM* DBMY13W3PNM*
DB 17W2 DBM17W2PNM* DBMY17W2PNM*
DB 21W1 DBM21W1PNM* DBMY21W1PNM*
DC 8W8 DCM8W8PNM* DCMY8W8PNM*
DC 13W6 DCM13W6PNM* DCMY13W6PNM*
DC 17W5 DCM17W5PNM* DCMY17W5PNM*
DC 21WA4 DCM21WA4PNM* DCMY21WA4PNM*
DC 25W3 DCM25W3PNM* DCMY25W3PNM*
DC 27W2 DCM27W2PNM* DCMY27W2PNM*
DD 24W7 DDM24W7PNM* DDMY24W7PNM*
DD 36W4 DDM36W4PNM* DDMY36W4PNM*
DD 43W2 DDM43W2PNM* DDMY43W2PNM*
DD 47W1 DDM47W1PNM* DDMY47W1PNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM5W1PNMB
For shells with 50 microinches gold, add K52. Example: DEM5W1PNMK52
Keyed
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,368 (.0145) W
±0,41 (.016) K
±0,317 (.0125) K
±0,25 (.010) L
±0,25 (.010)
DE 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DC 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
DD 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 1,52 (.060) 0,99 (.039)
Engaging Face
DD Configuration
10°
ED
A
BØ 3,05
(.120)
C
10,72 (.422)
MAX
L
K
2,84
(.112)
5,69
(.224)
F
W
2,84
(.112)
Dimensions are shown in mm (inch)
Dimensions subject to change 189
D Subminiature Space/High Reliability
Solder Cup
Receptacle
Reader’s Resource
ɀFor contact cavity arrangements,
see page 223.
ɀFor panel cutouts, see page 221.
ɀFor hardware views (Standard), see page 226.
Part Numbers
Shell Size Layout Through Hole Dual
Float Mount
DE 5W1 DEM5W1SNM* DEMY5W1SNM*
DA 7W2 DAM7W2SNM* DAMY7W2SNM*
DA 11W1 DAM11W1SNM* DAMY11W1SNM*
DA 3W3 DAM3W3SNM* DAMY3W3SNM*
DA 3WK3DAM3WK3SNM* DAMY3WK3SNM*
DB 5W5 DBM5W5SNM* DBMY5W5SNM*
DB 9W4 DBM9W4SNM* DBMY9W4SNM*
DB 13W3 DBM13W3SNM* DBMY13W3SNM*
DB 17W2 DBM17W2SNM* DBMY17W2SNM*
DB 21W1 DBM21W1SNM* DBMY21W1SNM*
DC 8W8 DCM8W8SNM* DCMY8W8SNM*
DC 13W6 DCM13W6SNM* DCMY13W6SNM*
DC 17W5 DCM17W5SNM* DCMY17W5SNM*
DC 21WA4 DCM21WA4SNM* DCMY21WA4SNM*
DC 25W3 DCM25W3SNM* DCMY25W3SNM*
DC 27W2 DCM27W2SNM* DCMY27W2SNM*
DD 24W7 DDM24W7SNM* DDMY24W7SNM*
DD 36W4 DDM36W4SNM* DDMY36W4SNM*
DD 43W2 DDM43W2SNM* DDMY43W2SNM*
DD 47W1 DDM47W1SNM* DDMY47W1SNM*
Notes: * For Residual Magnetism Level of 200 gamma, add B. Example: DEM5W1SNMB
For shells with 50 microinches gold, add K52. Example: DEM5W1SNMK52
Keyed
Dimensions
Shell Size A
±0,38 (.015) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) W
±0,38 (.015) K
±0,318 (.0125) L
±0,25 (.010)
DE 30,81 (1.123) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DA 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DB 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DC 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
DD 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030)
Engaging Face DD Configuration
A
C
B
ED
Ø 3,05
(.120)
10°
9,91 (.390)
MAX
K
L
5,69
(.224) 2,84
(.112)
2,84 (.112)
F
W
Dimensions are shown in mm (inch)
Dimensions subject to change
190
D Subminiature Space/High Reliability
Cable (Size 8) Loose Contacts — Coaxial 50 Ohm — Straight
Straight Crimp Braid
Plug Receptacle
Description
Part Number
50Ȗin.
Gold Over Copper A
max. B
max. D
min. RG Cable Number
Old New
Plug DM53740-36 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Receptacle DM53742-37 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Staight Solder Braid
Plug Receptacle
Description
Part Number
50Ȗin.
Gold Over Copper A
max. B
max. D
min. RG Cable Number
Old New
Plug DM53740-5147 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Receptacle DM53742-5127 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/U
188/U 179B/U
316B/U
Note: Dimensions include outer sleeve
Dimensions are shown in mm (inch)
Dimensions subject to change191
ytilibaileR hgiH/ecapSerutainimbuS D
Cable (Size 8) Loose Contacts — High Power — Solder
Plug
Part Number
50 in. Gold Over Copper
Non-Magnetic
Part Number
50 in. Gold Over Copper
Non-Magnetic (European)
Part Number
50 in. Gold Current Rating Wire Size
DM53745-72 DM115224-1040A DM53745-28 40 A 8 AWG
DM53745-71 DM115224-1020A DM53745-27 20 A 12 AWG
DM53745-70 DM115224-1010A DM53745-25 10 A 16 AWG
Receptacle
Part Number
50 in. Gold Over Copper
Non-Magnetic
Part Number
50 in. Gold Over Copper
Non-Magnetic (European)
Part Number
50 in. Gold Current Rating Wire Size
DM53744-62 DM115224-2040A DM53744-21 40 A 8 AWG
DM53744-64 DM115224-2020A DM53744-25 20 A 12 AWG
DM53744-63 DM115224-2010A DM53744-24 10 A 16 AWG
Cable (Size 8) Loose Contacts — High Power — Crimp
Plug
Recommended Wire Trim Length
Part Number
50 in. Gold Over Copper
Non-Magnetic
Part Number
50 in. Gold
XA
max.
XB
max.
Part Number
50 in. Gold Over Copper
Non-Magnetic (European)
XA
min.
XB
max. Current Rating Wire Size
DM115224-3040 DM130338-1 4,60 (.181) 5,84 (.230) DM115224-3040A 4,20 (.165) 5,80 (.228) 40 A 8 AWG
DM115224-3020 DM130339-1 2,54 (.100) 5,54 (.218) DM115224-3020A 3,25 (.128) 4,70 (.185) 20 A 12 AWG
DM115224-3010 DM130340-1 1,07 (.067) 2,59 (.102) DM115224-3010A 2,50 (.098) 3,80 (.150) 10 A 16 AWG
Receptacle 20,93 - 20,42
(.824 - .804)
Ø AØ B
Recommended Wire Trim Length
Part Number
50 in. Gold Over Copper
Non-Magnetic
Part Number
50 in. Gold
XA
max.
XB
max.
Part Number
50 in. Gold Over Copper
Non-Magnetic (European)
XA
min.
XB
max. Current Rating Wire Size
DM115224-4040 DM13041-1 4,60 (.181) 5,84 (.230) DM115224-4040A 4,20 (.165) 5,80 (.228) 40 A 8 AWG
DM115224-4020 DM13042-1 2,54 (.100) 5,54 (.218) DM115224-4020A 3,25 (.128) 4,70 (.185) 20 A 12 AWG
DM115224-4010 DM13043-1 1,07 (.067) 2,59 (.102) DM115224-4010A 2,50 (.098) 3,80 (.150) 10 A 16 AWG
Crimp High Power Tooling
M300-BT
Crimp Tool/Locator
Wire Size Crimp Tool
Tool Setting Number
Standard Contacts
Tool Setting Number
European Contacts Locator
869PT66TB-003MGWA 8
869PT25TB-003MGWA 01
869PT11TB-003MGWA 21
Dimensions are shown in mm (inch)
Dimensions subject to change
192
D Subminiature Space/High Reliability
Metal Backshell
Metal Backshells provide strain relief.
Various profiles available for different cable routing
requirements.
Product Features
ɀQualified to MIL-Spec M85049
Materials and Finishes
Material: Brass
Finish: 50Ȗin. Gold over Copper
Deep Straight Clamp
ɀKit consists of 1shell, 2 cable clamps,
2 screws, 2 hex nuts
B
E
CABLE
ENTRY
2X Ø 3,45
(.136)
C
AF
CABLE
ENTRY
G0,38 ± ,013
(.015 ± .005)
H MAX
D MAX
Shell Size Layout Part Number
Non-Magnetic A
±0,38 (.015) B
±0,572 (.0225) C
±0,13 (.005) D
max. E
±0,38 (.015) F
±0,38 (.015) G
±0,38 (.015) H
max.
DE 9 DE24657-16 30,56 (1.203) 12,484 (.4915) 24,99 (.984) 14,68 (.578) 9,53 (.375) 9,53 (.375) 19,05 (.750) 31,75 (1.250)
DA 15 DA24658-15 38,89 (1.531) 12,484 (.4915) 33,32 (1.312) 14,68 (.578) 18,11 (.713) 7,93 (.312) 19,05 (.750) 31,75 (1.250)
DB 25 DB24659-15 52,78 (2.078) 12,484 (.4915) 47,04 (1.852) 14,68 (.578) 25,40 (1.000) 7,93 (.312) 25,40 (1.000) 39,70 (1.563)
DC 37 DC24660-16 69,04 (2.718) 12,484 (.4915) 63,50 (2.500) 14,68 (.578) 34,93 (1.375) 7,93 (.312) 25,40 (1.000) 39,70 (1.563)
DD 50 DD24661-13 66,68 (2.625) 15,253 (.6005) 61,11 (2.406) 17,45 (.687) 35,71 (1.406) 10,31 (.406) 28,57 (1.125) 42,88 (1.688)
Round Cable Clamp
ɀKit consists of 1shell, 2 screws, 2 hex nuts
BØ D MAX
CABLE ENTRY
2X Ø 3,05
(.120)
A
C
EG
F
0,38 ± 0,13
(.015 ± .005)
Shell Size Layout Part Number
Non-Magnetic A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005) XD
max. E
±0,38 (.015) F
±0,38 (.015) G
±0,76 (.030)
DE 9 DE44994-2 30,68 (1.208) 12,70 (.500) 24,99 (.984) 10,31 (.406) 16,79 (.661) 3,18 (.125) 26,18 (1.031)
DA 15 DA20961-16 38,89 (1.531) 12,70 (.500) 33,33 (1.312 10,31 (.406) 24,99 (.984) 3,18 (.125) 26,18 (1.031)
DB 25 DB20962-18 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 15,06 (.593) 38,48 (1.515) 4,75 (.187) 26,98 (1.062)
DC 37 DC20963-17 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 18,23 (.718) 55,14 (2.171) 6,35 (.250) 26,98 (1.062)
DD 50 DD20964-19 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 20,62 (.812) 53,16 (2.093) 7,92 (.312) 26,98 (1.062)
Dimensions are shown in mm (inch)
Dimensions subject to change 193
D Subminiature Space/High Reliability
Short Straight Clamp
ɀKit consists of 1shell,
2 or 3 screws, 2 or 3 hex nuts
B
FE
CABLE
ENTRY
2X Ø 3,05
(.120)
A
CG
0,38 ± 0,13
(.015 ± .005)
12,30 ± 0,38
(.484 ± .015)
Shell Size Layout Part Number
Non-Magnetic
No. of
Cable Locking
Screws Included A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005) E
±0,38 (.015) F
±0,38 (.015) G
±0,89 (.035)
DA 15 DA19678-167 2 38,88 (1.531) 12,70 (.500) 33,33 (1.312) 7,51 (.296) 7,93 (.312) 16,36 (.644)
DB 25 DB19678-168 2 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 7,51 (.296) 20,22 (.796) 16,36 (.644)
DC 37 DC19678-138 3 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 7,51 (.296) 17,45 (.687) 16,36 (.644)
DD 50 DD19678-161 3 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 9,91 (.390) 17,45 (.687) 17,63 (.694)
90°Entry
ɀKit consists of 1shell,
1cable clamp, 1screw, 1nut, 2 rivnuts
(assembled)
#4-40 UNC-2B THD
2X MOUNTING HOLES
A
B
CG
H
E
CABLE
ENTRY
F
CABLE
ENTRY
2,77 ± 0,25
(.109 ± .010)
Shell Size Layout Part Number
Non-Magnetic A
±0,38 (.015) B
±0,76 (.030) C
±0,13 (.005) E
±0,76 (.030) F
±0,76 (.030) G
±0,76 (.030) H
±0,76 (.030)
DE 9 DE19977-47 30,56 (1.203) 18,24 (.718) 24,99 (.984) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281)
DA 15 DA19977-40 38,89 (1.531) 18,24 (.718) 33,33 (1.312) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281)
DB 25 DB19977-43 52,78 (2.078) 24,58 (.968) 47,04 (1.852) 11,10 (.437) 15,88 (.625) 11,89 (.468) 7,14 (.281)
DC 37 DC19977-45 69,04 (2.718) 30,15 (1.187) 63,50 (2.500) 11,10 (.437) 20,63 (.812) 11,89 (.468) 7,14 (.281)
DD 50 DD19977-44 66,68 (2.625) 31,75 (1.250) 61,11 (2.406) 14,28 (.562) 23,01 (.906) 13,49 (.531) 8,71 (.343)
Dimensions are shown in mm (inch)
Dimensions subject to change
194
D Subminiature Space/High Reliability
Screw Lock Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware.
Front Panel Mount Rear Panel Mount
Product Features
ɀEnsures positive mating
ɀProvides locking and latching for high
vibration applications
SCREW
CLIP
WITH
THD
NUT
WASHER
LOCK
WASHER
HEX NUT
MOUNTING
PANEL
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
Female Screw Lock
ɀKit consists of 1nut, 3 washers, 1lock
washer, 1hex nut
ɀOrder 2 per connector
4,78 ± 0,38
(.188 ± .015)
4,78 ± 0,38
(.188 ± .015) A
(ACROSS FLATS)
HEX
NOTE:
(1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw lock
assemblies.
(2) A third flat washer is supplied for front panel mounting of tab shell connectors.
#4-40 UNC-2B THD
REAR FLANGE (REF)
#4-40 UNC-2ATHD
6,35 (.250) APPROX
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (.060) MAX PANEL
Part Number
Non-Magnetic Brass
Gold Finish A
±0,38 (.015)
D20418-52 7,92 (.312)
12,70 (.500)
D20418-70 14,50 (.571)
D20418-101 15,88 (.625)
Front Panel Mount Rear Panel Mount
Male Screw Lock
ɀKit consists of 1screw and 1clip
ɀOrder 2 per connector
Material: Copper Alloy
Finish: Gold over Copper
B
SCREW
#4-40 UNC-2A THD
C
CLIP GAP
A
CLIP
Shell Size Part Number A
±0,38 (.015) B
±0,25 (.010) C
±0,13 (.005)
DE, DA, DB, DC D20419-74 14,10 (.555) 6,35 (.250) 1,22 (.048)
DE, DA, DB, DC D20419-48 14,10 (.555) 7,14 (.281) 1,70 (.067)
DE, DA, DB, DC D20419-73 14,10 (.555) 7,14 (.281) 1,70 (.067)
DE, DA, DB, DC D20419-84 14,10 (.555) 7,14 (.281) 2,34 (.092)
DD D20420-67 16,66 (.656) 7,14 (.281) 1,22 (.048)
DD D20420-49 16,66 (.656) 6,35 (.250) 1,70 (.067)
DD D20420-63 16,66 (.656) 7,14 (.281) 1,22 (.048)
DD D20420-88 16,66 (.656) 7,92 (.312) 2,34 (.092)
Dimensions are shown in mm (inch)
Dimensions subject to change 195
D Subminiature Space/High Reliability
NASA/GSFC Cross Reference
NASA/GSFC
Part Number ITT Cannon
Part Number NASA/GSFC
Part Number ITT Cannon
Part Number NASA/GSFC
Part Number ITT Cannon
Part Number
GO8P1 030-2042-002
GO8S1 031-1147-002
S-311-P-4/6GCP1 DM53740-17
S-311-P-4/6GCP2 DM53740-15
S-311-P-4/6GCP3 DM53740-16
S-311-P-4/6GCP4 DM53740-18
S-311-P-4/6GCRP1 DM53741-12
S-311-P-4/6GCRP2 DM53741-11
S-311-P-4/6GCRP3 DM53741-10
S-311-P-4/6GCRP4 DM53741-13
S-311-P-4/6GCRS1 DM53743-18
S-311-P-4/6GCRS2 DM53743-16
S-311-P-4/6GCRS3 DM53743-17
S-311-P-4/6GCRS4 DM53743-19
S-311-P-4/6GCS1 DM53742-18
S-311-P-4/6GCS2 DM53742-16
S-311-P-4/6GCS3 DM53742-17
S-311-P-4/6GCS4 DM53742-19
S-311-P-4/6GHP6 DM51157-8
S-311-P-4/6GHRP6 DM51157-5005
S-311-P-4/6GHRS6 DM51155-5005
S-311-P-4/6GHS6 DM51155-7
311P409-1P-B-12 DEMA9PNMBK47FO
311P409-1P-B-15 DEMAK9PNMBK47FO
311P409-1S-B-12 DEMA9SNMBK47FO
311P409-1S-B-15 DEMAK9SNMBK47FO
311P409-2P-B-12 DEMA15PNMBK47FO
311P409-2P-B-15 DEMAK15PNMBK47FO
311P409-2S-B-12 DEMA15SNMBK47FO
311P409-2S-B-15 DEMAK15SNMBK47FO
311P409-3P-B-12 DEMA25PNMBK47FO
311P409-3P-B-15 DEMAK25PNMBK47FO
311P409-3S-B-12 DEMA25SNMBK47FO
311P409-3S-B-15 DEMAK25SNMBK47FO
311P409-4P-B-12 DEMA37PNMBK47FO
311P409-4P-B-15 DEMAK37PNMBK47FO
311P409-4S-B-12 DEMA37SNMBK47FO
311P409-4S-B-15 DEMAK37SNMBK47FO
311P409-5P-B-12 DEMA50PNMBK47FO
311P409-5S-B-15 DEMAK50PNMBK47FO
311P409-5S-B-12 DEMA50SNMBK47FO
311P409-5S-B-15 DEMAK50PNMBK47FO
S-311-P-4/10G1OP1 330-5291-081-02
S-311-P-4/10G1OS1 031-1007-052-05
311-P-10-B-1S-B-15 DEMB9S-NMB-76
311-P-10-B-4S-B-15 DCMB37S-NMB-76
311-P-10-1P-B-12 DEMPPNMB77
311-P-10-1P-B-15 DEM-9P-NMB-76
311-P-10-1P-C-12 DEM9PNMC77
311-P-10-1P-C-15 DEM9PNMC76
311-P-10-1S-B-12 DEM9SNMB77
311-P-10-1S-B-15 DEM-9S-NMB-76
311-P-10-1S-C-12 DEM-9S-NMC-77
311-P-10-1S-C-15 DEM9SNMC76
311-P-10-10P-B-12 DBM5W5PNMB77
311-P-10-10P-B-15 DBM-5W5P-NMB-76
311-P-10-10P-C-12 DBM-5W5P-NMC-77
311-P-10-10P-C-15 DBM-5W5P-NMC-76
311-P-10-10S-B-12 DBM-5W5S-NMB-77
311-P-10-10S-B-15 DBM-5W5S-NMB-76
311-P-10-10S-C-12 DBM-5W5S-NMC-77
311-P-10-10S-C-15 DBM-5W5S-NMC-76
311-P-10-11P-B-12 DBM-9W4P-NMB-77
311-P-10-11P-C-15 DBM-9W4P-NMC-76
311-P-10-11S-B-12 DBM-9W4S-NMB-77
311-P-10-11S-C-15 DBM-9W4S-NMC-76
311-P-10-12P-B-12 DBM13W3P-NMB-77
311-P-10-12P-B-15 DBM-13W3P-NMB-76
311-P-10-12P-C-15 DBM-13W3P-NMC-76
311-P-10-12S-B-12 DBM-13W3S-NMB-77
311-P-10-12S-B-15 DBM13W3S-NMB-76
311-P-10-12S-C-15 DBM-13W3S-NMC-76
311-P-10-13P-B-12 DBM17W2PNMB77
311-P-10-13P-B-15 DBM-17W2P-NMB-76
311-P-10-13P-C-12 DBM17W2P-NMC-77
311-P-10-13P-C-15 DBM-17W2P-NMC-76
311-P-10-13S-B-12 DBM17W2SNMB77
311-P-10-13S-C-12 DBM-17W2S-NMC-77
311-P-10-13S-C-15 DBM-17W2S-NMC-76
311-P-10-14P-B-12 DBM-21W1P-NMB-77
311-P-10-14P-B-15 DBM-21W1P-NMB-76
311-P-10-14S-B-12 DBM-21W1S-NMB-77
311-P-10-14S-B-15 DBM-21W1S-NMB-76
311-P-10-14S-C-15 DBM-21W1S-NMC-76
311-P-10-15P-B-12 DCM-8W8P-NMB-77
311-P-10-15P-B-15 DCM8W8PNMB76
311-P-10-15P-C-12 DCM-8W8P-NMC-77
311-P-10-15P-C-15 DCM8W8PNMC76
311-P-10-15S-B-12 DCM-8W8S-NMB-77
311-P-10-15S-B-15 DCM8W8SNMB76
311-P-10-15S-C-12 DCM-8W8S-NMC-77
311-P-10-15S-C-15 DCM-8W8S-MNC-76
311-P-10-16P-B-12 DCM-13W6P-NMB-77
311-P-10-16P-B-15 DCM-13W6P-NMB-76
311-P-10-16P-C-12 DCM-13W6P-NMC-77
311-P-10-16P-C-15 DCM-13W6P-NMC-76
311-P-10-16S-B-12 DCM-13W6S-NMB-77
311-P-10-16S-C-12 DCM-13W6S-NMC-77
311-P-10-16S-C-15 DCM13W6SNMC76
311-P-10-17P-B-12 DCM17W5PNMB77
311-P-10-17P-B-15 DCM-17W5P-NMB-76
311-P-10-17P-C-12 DCM-17W5P-NMC-77
311-P-10-17P-C-15 DCM-17W5P-NMC-76
311-P-10-17S-B-12 DCM-17W5S-NMB-77
311-P-10-17S-B-15 DCM17W5S-NMB-76
311-P-10-17S-C-12 DCM-17W5S-NMC-77
311-P-10-17S-C-15 DCM-17W5S-NMC-76
311-P-10-18P-B-12 DCM-21WA4P-NMB-77
311-P-10-18P-B-12 DCM21WA4P-NMB-76
311-P-10-18P-C-15 DCM-21WA4P-NMC-76
311-P-10-18S-B-12 DCM-21WA4S-NMB-77
311-P-10-18S-B-15 DCM21WA4S-NMB-76
311-P-10-19P-B-12 DCM-21W4P-NMB-77
311-P-10-19S-B-12 DCM-21W4S-NMB-77
311-P-10-19S-C-15 DCM21W4S-NMC-76
311-P-10-2P-B-12 DAM15PNMB77
311-P-10-2P-B-15 DAM15PNMB76
311-P-10-2P-C-12 DAM15PNMC77
311-P-10-2P-C-15 DAM15PNMC76
311-P-10-2S-B-12 DAM15SNMB77
311-P-10-2S-B-15 DAM-15S-NMB-76
311-P-10-2S-C-15 DAM-15S-NMC-76
311-P-10-2S-C-15 DAM-15S-NMC-76
311-P-10-20P-B-12 DCM-25W3P-NMB-77
311-P-10-20P-C-15 DCM25W3P-NMB-76
311-P-10-20S-B-12 DCM-25W36-NMB-77
311-P-10-20S-C-12 DCM-25W3S-NMC-77
311-P-10-20S-C-15 DCM-25W3S-NMC-76
311-P-10-21P-C-15 DCM27W2P-NMC-76
311-P-10-21S-C-15 DCM-27W2S-NMC-76
311-P-10-22P-B-12 DDM-24W7P-NMB-77
311-P-10-22P-B-15 DDM24W7PNMB76
311-P-10-22P-C-15 DDM-24W7P-NMC-76
311-P-10-22S-B-12 DDM24W7SNMB77
311-P-10-22S-B-15 DDM-24W7S-NMB-76
311-P-10-22S-C-15 DDM-24W7S-NMC-76
311-P-10-23P-B-12 DDM-36W4P-NMB-77
311-P-10-23S-B-12 DDM-36W4S-NMB-77
311-P-10-23S-B-15 DDM36W4SNMB76
311-P-10-23S-C-15 DDM-36W4S-NMC-76
311-P-10-24P-B-12 DDM43W2P-NMB-77
311-P-10-24S-C-12 DDM-43W2S-NMB-77
311-P-10-24S-C-15 DDM-43W2S-NMC-76
311-P-10-25P-C-15 DDM47W1P-NMC-76
311-P-10-25S-C-15 DDM-47W1S-NMC-76
311-P-10-3S-B-12 DBM25PNMB77
311-P-10-3P-B-15 DBM25PNMB76
311-P-10-3P-C-12 DBM25PNMC77
311-P-10-3P-C-15 DBM25PNMC76
311-P-10-3S-B-12 DBM25PNMB77
311-P-10-3S-B-15 DBM-25S-NMB-76
311-P-10-3S-C-12 DBM-25S-NMC-77
311-P-10-3S-C-15 DBM-25S-NMC-76
311-P-10-4P-B-12 DCM37PNMB77
311-P-10-4P-B-15 DCM37PNMB76
311-P-10-4P-C-12 DCM-37P-NMC-77
311-P-10-4P-C-15 DCM37PNMC76
311-P-10-4S-B-12 DCM37SNMB77
311-P-10-4S-B-15 DCM-37S-NMB-76
311-P-10-4S-C-12 DCM-37S-NMC-77
311-P-10-4S-C-15 DCM-37S-NMC-76
311-P-10-5P-B-12 DDM50PNMB77
311-P-10-5P-B-15 DDM50PNMB76
311-P-10-5P-C-12 DDM-50P-NMC-77
311-P-10-5P-C-15 DDM50PNMC76
311-P-10-5S-B-12 DDM50SNMB77
311-P-10-5S-B-15 DDM50SNMB76
311-P-10-5S-C-12 DDM-50S-NMC-77
311-P-10-5S-C-15 DDM-50S-NMC-76
311-P-10-6P-B-12 DEM-5W1P-NMB-77
311-P-10-6P-B-15 DEM-5W1P-NMB-76
311-P-10-6P-C-15 DEM-5W1P-NMC-76
311-P-10-6S-B-12 DEM-5W1S-NMB-77
311-P-10-6P-C-15 DEM-5W1S-NMC-76
311-P-10-7P-B-12 DAM3W3PNMC76
311-P-10-7P-B-15 DAM-3W3P-NMB-76
311-P-10-7P-C-12 DAM3W3P-NMC-77
311-P-10-7P-C-15 DAM-3W3P-NMC-76
311-P-10-7S-B-12 DAM3W3SNMB77
311-P-10-7S-B-15 DAM3W3SNMB76
311-P-10-7S-C-12 DAM3W3S-NMC-76
311-P-10-7S-C-15 DAM-3W3S-NMC-76
311-P-10-8P-B-12 DAM-7W2P-NMB-77
311-P-10-8P-B-15 DAM-7W2P-NMB-76
311-P-10-8P-C-15 DAM-7W2P-NMC-76
311-P-10-8S-B-12 DAM-7W2S-NMB-77
311-P-10-8P-C-12 DAM7W2S-NMC-77
311-P-10-8P-C-15 DAM-7W2S-NMC-76
311-P-10-9P-B-12 DAM-11W1P-NMB-77
311-P-10-9P-B-15 DAM-11W1P-NMB-76
311-P-10-9P-C-12 DAM-11W1P-NMC-77
311-P-10-9P-C-15 DAM-11W1P-NMC-76
311-P-10-9S-B-12 DAM-11W1S-NMB-77
311-P-10-9S-B-15 DAM-11W1S-NMB-76
311-P-10-9S-C-12 DAM-11W1S-NMC-77
311-P-10-9S-C-15 DAM-11W1S-NMC-76
311-P-10B-1S-B-12 DEMB9SNMB77
311-P-10B-1S-C-12 DEMB-9S-NMC-77
311-P-10B-1S-C-15 DEMB9S-NMC-76
311-P-10B-13S-B-15 DBMB-17W2S-NMB-76
311-P-10B-17S-B-15 DCMB-17W5S-NMB-76
311-P-10B-2S-B-12 DAMB15SNMB77
311-P-10B-2S-C-12 DAMB-15S-NMC-77
311-P-10B-2S-C-15 DAMB15SNMC76
311-P-10B-22S-B-15 DDMB-247S-NMB-76
311-P-10B-3S-B-12 DBMB-25S-NMB-77
311-P-10B-3S-B-15 DBMB-25S-NMB-76
311-P-10B-3S-C-12 DBMB-25S-NMC-77
311-P-10B-3S-C-15 DBMB25SNMC76
311-P-10B-4S-B-12 DCMB-37S-NMB-77
Dimensions are shown in mm (inch)
Dimensions subject to change
196
D Subminiature Space/High Reliability
NASA/GSFC Cross Reference
NASA/GSFC
Part Number ITT Cannon
Part Number NASA/GSFC
Part Number ITT Cannon
Part Number NASA/GSFC
Part Number ITT Cannon
Part Number
311-P-10B-4S-C-12 DCMB-37S-NMC-77
311-P-10B-4S-C-15 DCMB37S-NMC-76
311-P-10B-5S-B-12 DDMB-50S-NMB-77
311-P-10B-5S-B-15 DDMB50S-NMB-76
311-P-10B-5S-C-12 DDMB-50S-NMC-77
311-P-10B-5S-C-15 DDMB50S-NMC-76
311-P-10B-6S-B-15 DEMB-5W1S-NMB-76
311-P-10B-8S-B-12 DAMB-7W2S-NMB-77
311-P-10B-8S-B-15 DAMB-7W2S-NMB-76
311-P-10B-9S-B-12 DAMB-11W1S-NMB-77
ESA/SCC Cross Reference
ESA–SCC
Part Number ITT Cannon
Part Number ESA–SCC
Part Number ITT Cannon
Part Number ESA–SCC
Part Number ITT Cannon
Part Number
340100101B DEM5W1SNMB DEM5W1SNMBK52
340100101B DAM3W3SNMB DAM3W3SNMBK52
340100101B DAM7W2SNMB DAM7W2SNMBK52
340100101B DAM11W1SNMB DAM11W1SNMBK52
340100101B DBM5W5SNMB DBM5W5SNMBK52
340100101B DBM9W4SNMB DBM9W4SNMBK52
340100101B DBM13W3SNMB DBM13W3SNMBK52
340100101B DBM17W2SNMB DBM17W2SNMBK52
340100101B DBM21W1SNMB DBM21W1SNMBK52
340100101B DCM8W8SNMB DCM8W8SNMBK52
340100101B DCM13W6SNMB DCM13W6SNMBK52
340100101B DCM17W5SNMB DCM17W5SNMBK52
340100101B DCM21WA4SNMB DCM21WA4SNMBK52
340100101B DCM25W3SNMB DCM25W3SNMBK52
340100101B DCM27W2SNMB DCM27W2SNMBK52
340100101B DDM24W7SNMB DDM24W7SNMBK52
340100101B DDM36W4SNMB DDM36W4SNMBK52
340100101B DDM43W2SNMB DDM43W2SNMBK52
340100101B DDM47W1SNMB DDM47W1SNMBK52
340100101B DEM5W1PNMB DEM5W1PNMBK52
340100101B DAM3W3PNMB DAM3W3PNMBK52
340100101B DAM7W2PNMB DAM7W2PNMBK52
340100101B DAM11W1PNMB DAM11W1PNMBK52
340100101B DBM5W5PNMB DBM5W5PNMBK52
340100101B DBM9W4PNMB DBM9W4PNMBK52
340100101B DBM13W3PNMB DBM13W3PNMBK52
340100101B DBM17W2PNMB DBM17W2PNMBK52
340100101B DBM21W1PNMB DBM21W1PNMBK52
340100101B DCM8W8PNMB DCM8W8PNMBK52
340100101B DCM13W6PNMB DCM13W6PNMBK52
340100101B DCM17W5PNMB DCM17W5PNMBK52
340100101B DCM21WA4PNMB DCM21WA4PNMBK52
340100101B DCM25W3PNMB DCM25W3PNMBK52
340100101B DCM27W2PNMB DCM27W2PNMBK52
340100101B DDM24W7PNMB DDM24W7PNMBK52
340100101B DDM36W4PNMB DDM36W4PNMBK52
340100101B DDM43W2PNMB DDM43W2PNMBK52
340100101B DDM47W1PNMB DDM47W1PNMBK52
340100101B DEM5W1SOL3NMB DEM5W1SOL3NMBK52
340100101B DAM7W2SOL3NMB DAM7W2SOL3NMBK52
340100101B DAM11W1SOL3NMB DAM11W1SOL3NMBK52
340100101B DBM9W4SOL3NMB DBM9W4SOL3NMBK52
340100101B DBM13W3SOL3NMB DBM13W3SOL3NMBK52
340100101B DBM17W2SOL3NMB DBM17W2SOL3NMBK52
340100101B DBM21W1SOL3NMB DBM21W1SOL3NMBK52
340100101B DCM13W6SOL3NMB DCM13W6SOL3NMBK52
340100101B DCM17W5SOL3NMB DCM17W5SOL3NMBK52
340100101B DCM21WA4SOL3NMB DCM21WA4SOL3NMBK52
340100101B DCM25W3SOL3NMB DCM25W3SOL3NMBK52
340100101B DCM27W2OL3NMB DCM27W2OL3NMBK52
340100101B DDM24W7SOL3NMB DDM24W7SOL3NMBK52
340100101B DDM36W4SOL3NMB DDM36W4SOL3NMBK52
340100101B DDM43W2SOL3NMB DDM43W2SOL3NMBK52
340100101B DDM47W1SOL3NMB DDM47W1SOL3NMBK52
340100101B DEM5W1POL3NMB DEM5W1POL3NMBK52
340100101B DAM3W3POL3NMB DAM3W3POL3NMBK52
340100101B DAM7W2POL3NMB DAM7W2POL3NMBK52
340100101B DAM11W1POL3NMB DAM11W1POL3NMBK52
340100101B DBM9W4POL3NMB DBM9W4POL3NMBK52
340100101B DBM13W3POL3NMB DBM13W3POL3NMBK52
340100101B DBM17W2POL3NMB DBM17W2POL3NMBK52
340100101B DBM21W1POL3NMB DBM21W1POL3NMBK52
340100101B DCM13W6POL3NMB DCM13W6POL3NMBK52
340100101B DCM17W5POL3NMB DCM17W5POL3NMBK52
340100101B DCM21WA4POL3NMB DCM21WA4POL3NMBK52
340100101B DCM25W3POL3NMB DCM25W3POL3NMBK52
340100101B DCM27W2POL3NMB DCM27W2POL3NMBK52
340100101B DDM24W7POL3NMB DDM24W7POL3NMBK52
340100101B DDM36W4POL3NMB DDM36W4POL3NMBK52
340100101B DDM43W2POL3NMB DDM43W2POL3NMBK52
340100101B DDM47W1POL3NMB DDM47W1POL3NMBK52
340100101B DEM5W1S1A0NNMB DEM5W1S1A0NNMBK52
340100101B DAM7W2S1A0NNMB DAM7W2S1A0NNMBK52
340100101B DAM11W1S1A0NNMB DAM11W1S1A0NNMBK52
340100101B DBM9W4S1A0NNMB DBM9W4S1A0NNMBK52
340100101B DBM13W3S1A0NNMB DBM13W3S1A0NNMBK52
340100101B DBM17W2S1A0NNMB DBM17W2S1A0NNMBK52
340100101B DBM21W1S1A0NNMB DBM21W1S1A0NNMBK52
340100101B DCM13W6S1A0NNMB DCM13W6S1A0NNMBK52
340100101B DCM17W5S1A0NNMB DCM17W5S1A0NNMBK52
340100101B DCM21WA4S1A0NNMB DCM21WA4S1A0NNMBK52
340100101B DCM25W3S1A0NNMB DCM25W3S1A0NNMBK52
340100101B DCM27W2S1A0NNMB DCM27W2S1A0NNMBK52
340100101B DDM24W7S1A0NNMB DDM24W7S1A0NNMBK52
340100101B DDM36W4S1A0NNMB DDM36W4S1A0NNMBK52
340100101B DDM43W2S1A0NNMB DDM43W2S1A0NNMBK52
340100101B DDM47W1S1A0NNMB DDM47W1S1A0NNMBK52
340100101B DEM5W1P1A0NNMB DEM5W1P1A0NNMBK52
340100101B DAM7W2P1A0NNMB DAM7W2P1A0NNMBK52
340100101B DAM11W1P1A0NNMB DAM11W1P1A0NNMBK52
340100101B DBM9W4P1A0NNMB DBM9W4P1A0NNMBK52
340100101B DBM13W3P1A0NNMB DBM13W3P1A0NNMBK52
340100101B DBM17W2P1A0NNMB DBM17W2P1A0NNMBK52
340100101B DBM21W1P1A0NNMB DBM21W1P1A0NNMBK52
340100101B DCM13W6P1A0NNMB DCM13W6P1A0NNMBK52
340100101B DCM17W5P1A0NNMB DCM17W5P1A0NNMBK52
340100101B DCM21WA4P1A0NNMB DCM21WA4P1A0NNMBK52
340100101B DCM25W3P1A0NNMB DCM25W3P1A0NNMBK52
340100101B DCM27W2P1A0NNMB DCM27W2P1A0NNMBK52
340100101B DDM24W7P1A0NNMB DDM24W7P1A0NNMBK52
340100101B DDM36W4P1A0NNMB DDM36W4P1A0NNMBK52
340100101B DDM43W2P1A0NNMB DDM43W2P1A0NNMBK52
340100101B DDM47W1P1A0NNMB DDM47W1P1A0NNMBK52
340100101B DEM5W1S1A7NNMB DEM5W1S1A7NNMBK52
340100101B DAM7W2S1A7NNMB DAM7W2S1A7NNMBK52
340100101B DAM11W1S1A7NNMB DAM11W1S1A7NNMBK52
340100101B DBM9W4S1A7NNMB DBM9W4S1A7NNMBK52
340100101B DBM13W3S1A7NNMB DBM13W3S1A7NNMBK52
340100101B DBM17W2S1A7NNMB DBM17W2S1A7NNMBK52
340100101B DBM21W1S1A7NNMB DBM21W1S1A7NNMBK52
340100101B DCM13W6S1A7NNMB DCM13W6S1A7NNMBK52
340100101B DCM17W5S1A7NNMB DCM17W5S1A7NNMBK52
340100101B DCM21WA4S1A7NNMB DCM21WA4S1A7NNMBK52
340100101B DCM25W3S1A7NNMB DCM25W3S1A7NNMBK52
340100101B DCM27W2S1A7NNMB DCM27W2S1A7NNMBK52
340100101B DDM24W7S1A7NNMB DDM24W7S1A7NNMBK52
340100101B DDM36W4S1A7NNMB DDM36W4S1A7NNMBK52
340100101B DDM43W2S1A7NNMB DDM43W2S1A7NNMBK52
340100101B DDM47W1S1A7NNMB DDM47W1S1A7NNMBK52
340100101B DEM5W1P1A7NNMB DEM5W1P1A7NNMBK52
340100101B DAM7W2P1A7NNMB DAM7W2P1A7NNMBK52
340100101B DAM11W1P1A7NNMB DAM11W1P1A7NNMBK52
340100101B DBM9W4P1A7NNMB DBM9W4P1A7NNMBK52
340100101B DBM13W3P1A7NNMB DBM13W3P1A7NNMBK52
340100101B DBM17W2P1A7NNMB DBM17W2P1A7NNMBK52
340100101B DBM21W1P1A7NNMB DBM21W1P1A7NNMBK52
340100101B DCM13W6P1A7NNMB DCM13W6P1A7NNMBK52
340100101B DCM17W5P1A7NNMB DCM17W5P1A7NNMBK52
340100101B DCM21WA4P1A7NNMB DCM21WA4P1A7NNMBK52
340100101B DCM25W3P1A7NNMB DCM25W3P1A7NNMBK52
340100101B DCM27W2P1A7NNMB DCM27W2P1A7NNMBK52
340100101B DDM24W7P1A7NNMB DDM24W7P1A7NNMBK52
340100101B DDM36W4P1A7NNMB DDM36W4P1A7NNMBK52
340100101B DDM43W2P1A7NNMB DDM43W2P1A7NNMBK52
340100101B DDM47W1P1A7NNMB DDM47W1P1A7NNMBK52
340100101B DEM5W1S1A9NNMB DEM5W1S1A9NNMBK52
340100101B DAM7W2S1A9NNMB DAM7W2S1A9NNMBK52
340100101B DAM11W1S1A9NNMB DAM11W1S1A9NNMBK52
340100101B DBM9W4S1A9NNMB DBM9W4S1A9NNMBK52
340100101B DBM13W3S1A9NNMB DBM13W3S1A9NNMBK52
340100101B DBM17W2S1A9NNMB DBM17W2S1A9NNMBK52
340100101B DBM21W1S1A9NNMB DBM21W1S1A9NNMBK52
340100101B DCM13W6S1A9NNMB DCM13W6S1A9NNMBK52
340100101B DCM17W5S1A9NNMB DCM17W5S1A9NNMBK52
340100101B DCM21WA4S1A9NNMB DCM21WA4S1A9NNMBK52
340100101B DCM25W3S1A9NNMB DCM25W3S1A9NNMBK52
340100101B DCM27W2S1A9NNMB DCM27W2S1A9NNMBK52
340100101B DDM24W7S1A9NNMB DDM24W7S1A9NNMBK52
340100101B DDM36W4S1A9NNMB DDM36W4S1A9NNMBK52
340100101B DDM43W2S1A9NNMB DDM43W2S1A9NNMBK52
340100101B DDM47W1S1A9NNMB DDM47W1S1A9NNMBK52
340100101B DEM5W1P1A9NNMB DEM5W1P1A9NNMBK52
340100101B DAM7W2P1A9NNMB DAM7W2P1A9NNMBK52
340100101B DAM11W1P1A9NNMB DAM11W1P1A9NNMBK52
340100101B DBM9W4P1A9NNMB DBM9W4P1A9NNMBK52
340100101B DBM13W3P1A9NNMB DBM13W3P1A9NNMBK52
340100101B DBM17W2P1A9NNMB DBM17W2P1A9NNMBK52
340100101B DBM21W1P1A9NNMB DBM21W1P1A9NNMBK52
340100101B DCM13W6P1A9NNMB DCM13W6P1A9NNMBK52
340100101B DCM17W5P1A9NNMB DCM17W5P1A9NNMBK52
340100101B DCM21WA4P1A9NNMB DCM21WA4P1A9NNMBK52
340100101B DCM25W3P1A9NNMB DCM25W3P1A9NNMBK52
340100101B DCM27W2P1A9NNMB DCM27W2P1A9NNMBK52
340100101B DDM24W7P1A9NNMB DDM24W7P1A9NNMBK52
340100101B DDM36W4P1A9NNMB DDM36W4P1A9NNMBK52
340100101B DDM43W2P1A9NNMB DDM43W2P1A9NNMBK52
340100101B DDM47W1P1A9NNMB DDM47W1P1A9NNMBK52
340100101B DEM5W1SF179ANMB DEM5W1SF179ANMBK52
340100101B DAM7W2SF179ANMB DAM7W2SF179ANMBK52
340100101B DAM11W1SF179ANMB DAM11W1SF179ANMBK52
340100101B DBM9W4SF179ANMB DBM9W4SF179ANMBK52
340100101B DBM13W3SF179ANMB DBM13W3SF179ANMBK52
340100101B DBM17W2SF179ANMB DBM17W2SF179ANMBK52
340100101B DBM21W1SF179ANMB DBM21W1SF179ANMBK52
340100101B DCM13W6SF179ANMB DCM13W6SF179ANMBK52
340100101B DCM17W5SF179ANMB DCM17W5SF179ANMBK52
340100101B DCM21WA4SF179ANMBDCM21WA4SF179ANMBK52
340100101B DCM25W3SF179ANMB DCM25W3SF179ANMBK52
340100101B DCM27W2SF179ANMB DCM27W2SF179ANMBK52
340100101B DDM24W7SF179ANMB DDM24W7SF179ANMBK52
Dimensions are shown in mm (inch)
Dimensions subject to change 197
D Subminiature Space/High Reliability
ESA/SCC Cross Reference
ESA–SCC
Part Number ITT Cannon
Part Number ESA–SCC
Part Number ITT Cannon
Part Number ESA–SCC
Part Number ITT Cannon
Part Number
340100101B DDM36W4SF179ANMB DDM36W4SF179ANMBK52
340100101B DDM43W2SF179ANMB DDM43W2SF179ANMBK52
340100101B DDM47W1SF179ANMB DDM47W1SF179ANMBK52
340100101B DEM5W1PF179ANMB DEM5W1PF179ANMBK52
340100101B DAM7W2PF179ANMB DAM7W2PF179ANMBK52
340100101B DAM11W1PF179ANMB DAM11W1PF179ANMBK52
340100101B DBM9W4PF179ANMB DBM9W4PF179ANMBK52
340100101B DBM13W3PF179ANMB DBM13W3PF179ANMBK52
340100101B DBM17W2PF179ANMB DBM17W2PF179ANMBK52
340100101B DBM21W1PF179ANMB DBM21W1PF179ANMBK52
340100101B DCM13W6PF179ANMB DCM13W6PF179ANMBK52
340100101B DCM17W5PF179ANMB DCM17W5PF179ANMBK52
340100101B DCM21WA4PF179ANMBDCM21WA4PF179ANMBK52
340100101B DCM25W3PF179ANMB DCM25W3PF179ANMBK52
340100101B DCM27W2PF179ANMB DCM27W2PF179ANMBK52
340100101B DDM24W7PF179ANMB DDM24W7PF179ANMBK52
340100101B DDM36W4PF179ANMB DDM36W4PF179ANMBK52
340100101B DDM43W2PF179ANMB DDM43W2PF179ANMBK52
340100101B DDM47W1PF179ANMB DDM47W1PF179ANMBK52
340100101B DEM9SNMB DEM9SNMBK52
340100101B DAM15SNMB DAM15SNMBK52
340100101B DBM25SNMB DBM25SNMBK52
340100101B DCM37SNMB DCM37SNMBK52
340100101B DDM50SNMB DDM50SNMBK52
340100101B DEM9PNMB DEM9PNMBK52
340100101B DAM15PNMB DAM15PNMBK52
340100101B DBM25PNMB DBM25PNMBK52
340100101B DCM37PNMB DCM37PNMBK52
340100101B DDM50PNMB DDM50PNMBK52
340100101B DEM9SOL3NMB DEM9SOL3NMBK52
340100101B DAM15SOL3NMB DAM15SOL3NMBK52
340100101B DBM25SOL3NMB DBM25SOL3NMBK52
340100101B DCM37SOL3NMB DCM37SOL3NMBK52
340100101B DDM50SOL3NMB DDM50SOL3NMBK52
340100101B DEM9POL3NMB DEM9POL3NMBK52
340100101B DAM15POL3NMB DAM15POL3NMBK52
340100101B DBM25POL3NMB DBM25POL3NMBK52
340100101B DCM37POL3NMB DCM37POL3NMBK52
340100101B DDM50POL3NMB DDM50POL3NMBK52
340100101B DEM9S1A0NNMB DEM9S1A0NNMBK52
340100101B DAM15S1A0NNMB DAM15S1A0NNMBK52
340100101B DBM25S1A0NNMB DBM25S1A0NNMBK52
340100101B DCM37S1A0NNMB DCM37S1A0NNMBK52
340100101B DDM50S1A0NNMB DDM50S1A0NNMBK52
340100101B DEM9P1A0NNMB DEM9P1A0NNMBK52
340100101B DAM15P1A0NNMB DAM15P1A0NNMBK52
340100101B DBM25P1A0NNMB DBM25P1A0NNMBK52
340100101B DCM37P1A0NNMB DCM37P1A0NNMBK52
340100101B DDM50P1A0NNMB DDM50P1A0NNMBK52
340100101B DEM9S1A7NNMB DEM9S1A7NNMBK52
340100101B DAM15S1A7NNMB DAM15S1A7NNMBK52
340100101B DBM25S1A7NNMB DBM25S1A7NNMBK52
340100101B DCM37S1A7NNMB DCM37S1A7NNMBK52
340100101B DDM50S1A7NNMB DDM50S1A7NNMBK52
340100101B DEM9P1A7NNMB DEM9P1A7NNMBK52
340100101B DAM15P1A7NNMB DAM15P1A7NNMBK52
340100101B DBM25P1A7NNMB DBM25P1A7NNMBK52
340100101B DCM37P1A7NNMB DCM37P1A7NNMBK52
340100101B DDM50P1A7NNMB DDM50P1A7NNMBK52
340100101B DEM9S1A9NNMB DEM9S1A9NNMBK52
340100101B DAM15S1A9NNMB DAM15S1A9NNMBK52
340100101B DBM25S1A9NNMB DBM25S1A9NNMBK52
340100101B DCM37S1A9NNMB DCM37S1A9NNMBK52
340100101B DDM50S1A9NNMB DDM50S1A9NNMBK52
340100101B DEM9P1A9NNMB DEM9P1A9NNMBK52
340100101B DAM15P1A9NNMB DAM15P1A9NNMBK52
340100101B DBM25P1A9NNMB DBM25P1A9NNMBK52
340100101B DCM37P1A9NNMB DCM37P1A9NNMBK52
340100101B DDM50P1A9NNMB DDM50P1A9NNMBK52
340100101B DEM9SF179ANMB DEM9SF179ANMBK52
340100101B DAM15SF179ANMB DAM15SF179ANMBK52
340100101B DBM25SF179ANMB DBM25SF179ANMBK52
340100101B DCM37SF179ANMB DCM37SF179ANMBK52
340100101B DDM50SF179ANMB DDM50SF179ANMBK52
340100101B DEM9PF179ANMB DEM9PF179ANMBK52
340100101B DAM15PF179ANMB DAM15PF179ANMBK52
340100101B DBM25PF179ANMB DBM25PF179ANMBK52
340100101B DCM37PF179ANMB DCM37PF179ANMBK52
340100101B DDM50PF179ANMB DDM50PF179ANMBK52
340100102B DEMA9SNMB DEMA9SNMBK52
340100102B DAMA15SNMB DAMA15SNMBK52
340100102B DBMA25SNMB DBMA25SNMBK52
340100102B DCMA37SNMB DCMA37SNMBK52
340100102B DDMA50SNMB DDMA50SNMBK52
340100102B DEMA9PNMB DEMA9PNMBK52
340100102B DAMA15PNMB DAMA15PNMBK52
340100102B DBMA25PNMB DBMA25PNMBK52
340100102B DCMA37PNMB DCMA37PNMBK52
340100102B DDMA50PNMB DDMA50PNMBK52
340102217B DA19678-174
340102218B DB19678-175
340102219B DC19678-173
340102220B DD19678-176
340102221B DA19678-157
340102222B DB19678-171
340102223B DC19678-162
340102224B DD19678-172
340104001B DM115224-1040A
340104003B DM115224-1020A
340104005B DM115224-1010A
340104002B DM115224-2040A
340104004B DM115224-2020A
340104006B DM115224-2010A
340104007B DM115224-3040A
340104008B DM115224-4040A
340104009B DM115224-3020A
340104010B DM115224-4020A
340104011B DM115224-3010A
340104012B DM115224-4010A
340100401B DM115740-5036
340100405B DM115740-5046
340100409B DM115740-5047
340100402B DM115742-5028
340100406B DM115742-5039
340100410B DM115742-5075
340100403B DM115741-5048
340100407B DM115741-5032
340100404B DM115743-5064
340100408B DM115743-5040
340100411B DM115740-19
340100415B DM115740-13
340100419B DM115740-12
340100412B DM115742-15
340100416B DM115742-14
340100420B DM115742-13
340100413B DM115741-7
340100417B DM115741-8
340100414B DM115743-20
340100418B DM115743-22
340102207B DE-59-20
340102208B DE-60-20
340102209B DA-59-20
340102210B DA-60-20
340102211B DB-59-20
340102212B DB-60-20
340102213B DC-59-20
340102214B DC-60-20
340102215B DD-59-20
340102216B DD-60-20
340102201B D20418-52
340102206B D115418-70
340102258B D20418-101
340102202B D20419-74
340102203B D20419-48
340102204B D20420-67
340102205B D20420-49
340102244B D20419-73
340102245B D20419-84
340102246B D20420-63
340102247B D20420-88
340102225B DA19678-167
340102226B DB19678-168
340102227B DC19678-138
340102228B DD19678-161
340102239B DE19977-47
340102240B DA19977-40
340102241B DB19977-43
340102242B DC19977-45
340102243B DD19977-44
340102234B DE24657-16
340102235B DA24658-15
340102236B DB24659-15
340102237B DC24660-16
340102238B DD24661-13
340102229B DE115386-101A
340102230B DA115386-104A
340102231B DB115386-102A
340102232B DC115386-100A
340102233B DD115386-103A
340100501B 030-8882-002
340100502B 031-8944-000
340100503B 030-8848-020
340100504B 031-8787-020
340100505B 330-8782-001
340100506B 031-8843-001
340100507B 330-8944-000
340100508B 031-8902-000
Dimensions are shown in mm (inch)
Dimensions subject to change
198
D Subminiature Accessories
Selection Guide
Locking Hardware
Backshell Style Female Screw Lock
see page 209 Male Screw Lock
see page 208
Sliding Lock
Retainer Assembly
see page 210 Slide Lock Post
see page 211 Spring Latch Plate
see page 212 Spring Latch
see page 212
EMI Shielded Snap-Together
Metalized Plastic
Straight Exit
see page 200
——————
EMI Shielded Snap-Together
Metalized Plastic
40°Exit
see page 200
——————
EMI Shielded Die Cast Zinc
Metal
see page 202
————
Metal Deep Straight
Clamp
see page 203
ɀɀɀɀɀɀ
Metal Round Cable
Clamp
see page 203
ɀɀɀɀɀɀ
Metal Short Straight
Clamp
see page 204
ɀɀɀɀɀɀ
Metal 90°Entry
see page 204 ɀɀɀɀɀɀ
Plastic Snap-Together
Universal
see page 205
ɀɀ————
Plastic One-Piece
Snap-Together
see page 205
————
Plastic One-Piece Plastic
Straight Exit
see page 206
—— ɀɀɀɀ
Plastic One-Piece Plastic
90°Exit
see page 206
—— ɀɀɀɀ
Plastic Dataphone
see page 206 ————
Plastic Quick Disconnect
for IDC Cable
see page 207
——————
Plastic Quick Disconnect for
Round Cable —
Straight and 90°Exit
see page 207
——————
Supplied with backshell
ɀOptional, compatible locking hardware
— Not compatible
Dimensions are shown in mm (inch)
Dimensions subject to change 199
D Subminiature Accessories
Selection Guide
Locking Hardware
Locking Hook
see page 207 Locking Spring
see page 207 Jackscrew Assembly
see page 213 Jackpost Assembly
see page 213 Recessed Jackscrew
see page 201 Extended Jackscrew
see page 201 Thumbscrew
see page 201
Jackpost for
In-Line Connections
see page 201
———— ɀɀɀɀ
———— ɀɀɀɀ
————————
——— ɀ————
——— ɀ————
——— ɀ————
————————
—— ɀ—————
————————
————————
————————
————————
ɀɀ——————
ɀɀ——————
Dimensions are shown in mm (inch)
Dimensions subject to change
200
D Subminiature Accessories EMI Shielded Backshell
Snap-Together Metalized Plastic
Metalized plastic backshells reduce EMI/RFI
emissions.
Metalized plastic provides a light weight solution.
Design includes integral strain relieving cable
clamp.
Product Features
ɀImproves conformance to FCC DOC #20780
shielding requirements
ɀNo crimp ferrule tooling needed
ɀQuick and simple assembly using snap-
together design feature
Attenuation
CABLE
CLAMP CABLE
GROUNDING
TANG
Specifications
Attenuation: 49dB @ 100 MHz
Temperature Range: 20°C to 80°C
Materials and Finishes
Material: Thermoplastic, UL 94V-0 rated
Finish: Nickel over Copper
Straight Exit
16,99±0,30
(.669±.012)
C
B
D
E
D
E
Shell
Size Layout Part
Number A
±0,15 (.006) B
±0,30 (.012) C
±0,30 (.012) D
±0,30 (.120) E
±0,20 (.008) XH
Max.
DE 9 DE121073-154 24,95 (.982) 30,81 (1.213) 23,70 (.933) 16,00 (.630) 35,99 (1.417) 7,32 (.288)
DA 15 DA121073-150 33,30 (1.311) 39,09 (1.539) 31,80 (1.252) 16,00 (.630) 42,00 (1.654) 8,31 (.327)
DB 25 DB121073-151 47,00 (1.850) 53,01 (2.087) 45,01 (1.772) 16,00 (.630) 42,00 (1.654) 10,52 (.414)
DC 37 DC121073-152 63,45 (2.498) 69,29 (2.728) 60,30 (2.374) 16,00 (.630) 42,00 (1.654) 12,32 (.485)
DD 50 DD121073-153 61,10 (2.410) 66,90 (2.634) 58,30 (2.295) 19,00 (.748) 42,00 (1.654) 13,00 (.512)
40°Exit
Shell
Size Layout Part
Number B
±0,30 (.012) C
±0,30 (.012) D
±0,30 (.012) E
±0,20 (.008) Cable Diameter
Min. Max.
DE 9 DE121073-54 35,99 (1.417) 22,00 (.866) 16,00 (.630) 35,99 (1.417) 3,51 (.138) 7,49 (.295)
DA 15 DA121073-50 44,29 (1.744) 27,31 (1.075) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 8,99 (.354)
DB 25 DB121073-51 57,99 (2.283) 41,00 (1.614) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 11,00 (.433)
DC 37 DC121073-52 74,50 (2.933) 57,51 (2.264) 16,00 (.630) 42,01 (1.654) 6,50 (.256) 11,00 (.433)
DD 50 DD121073-53 72,97 (2.873) 54,99 (2.165) 19,00 (.748) 42,01 (1.654) 8,99 (.354) 13,00 (.512)
ØH
MAX
A
ɀKit consists of 1front shell, 1rear shell,
1cable clamp, 2 screws
ɀOptional locking hardware sold separately,
see page 201.
ɀKit consists of 1front shell, 1rear shell,
1cable clamp, 2 screws
ɀOptional locking hardware sold separately,
see page 201.
Note: Cable grounding tang not available on DE size backshell.
Dimensions are shown in mm (inch)
Dimensions subject to change 201
D Subminiature Accessories EMI Shielded Backshell
Locking Hardware for Snap-Together EMI Shielded Backshell
Recessed Jackscrew Extended Jackscrew Thumbscrew
#4-40
THREADS
13,50(.531)
4,50
(.177)
Ø 4,50
(.177) 6,00
(.236)
MIN
9,00
(.354) 4,30
(.169)
6,00
(.236)
MIN
Ø 4,10
(.161)
THREADS
19,00(.748)
9,00
(.354)
Part Number: 250-8501-004
Material: Brass
Finish: Nickel
Quantity Required
per Connector: 2
Part Number: 250-8501-009 (M3)
250-8501-010 (#4-40)
Material: Brass
Finish: Nickel
Quantity Required
per Connector: 2
Part Number: 250-8501-013
Material: Brass
Finish: Nickel
Quantity Required
per Connector: 2
Jackpost for In-Line Connections
Rectangular Nut Jackpost Jackpost Assembly
3,00 (.118)
MIN
5,00
(.197)
#4-40 UNC-2B
#4-40 UNC-2A
6,00
(.236)
4,90 (.193)
11,00
(.433)
(ACROSS FLATS)
Part Number: D121073-19
Material: Brass
Finish: Nickel
Quantity Required
per Connector: 2
ɀAssembly consists of 1rectangular nut,
1jackpost, 1#4-40 lock washer.
Dimensions are shown in mm (inch)
Dimensions subject to change
202
D Subminiature Accessories EMI Shielded Backshell
Die Cast Zinc Metal Backshell
Straight Exit
Die cast metal backshells reduce EMI/RFI
emissions.
Die cast metal backshells offer improved shielding
in a rugged package.
Product Features
ɀImproves conformance to FCC DOC #20780
shielding requirements
ɀNo crimp ferrule tooling needed
ɀKit consists of 1front shell, 1rear shell,
2 screws, 2 hex nuts, 2 mounting screws,
2 end brackets, 1set of compression inserts
(see this page)
Attenuation
A
B
Ø E
F
A
B
C
D
Ø E
F
A
B
C
D
Ø E
F
1
3
54 2
1
3
5
4
2
1
35
4
2
6
Shell
Size Layout Part
Number A
±0,13 (.005) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) XE
±0,13 (.005) F
±0,13 (.005)
DE 9 980-2000-345 31,12 (1.225) 37,21 (1.465) 15,75 (.620) 15,75 (.620) 10,16 (.400) 24,99 (.984)
DA 15 980-2000-346 39,12 (1.540) 40,64 (1.600) 15,75 (.620) 15,75 (.620) 10,16 (.400) 33,32 (1.312)
DB 25 980-2000-347 53,09 (2.090) 39,37 (1.550) 17,53 (.690) 15,75 (.620) 13,34 (.525) 47,17 (1.857)
DC 37 980-2000-348 69,34 (2.730) 45,72 (1.800) 21,95 (.864) 15,75 (.620) 18,44 (.726) 63,50 (2.500)
DD 50 980-2000-349 66,70 (2.626) 45,72 (1.800) 21,95 (.864) 18,54 (.730) 18,44 (.726) 61,11 (2.406)
Compression Inserts (Included With Die Cast Zinc Metal Backshell)
Compression inserts accommodate a wide variety
of cable sizes.
9 and 15 Position*
* Inserts may be supplied mirror image
25 Position* 37 and 50 Position*
#1#2#3#4#5#6
Position O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D. O.D. I.D.
9, 15 12,07 (.475) 8,13 (.320) 9,14 (.360) 8,00 (.315) 9,14 (.360) 6,48 (.255) 9,14 (.360) 7,24 (.285) 9,14 (.360) 5,33 (.210)
25 15,24 (.600) 11,43 (.450) 11,43 (.450) 10,41 (.410) 11,43 (.450) 9,40 (.370) 11,43 (.450) 7,62 (.300) 11,43 (.450) 5,84 (.230)
37, 50 16,64 (.655) 14,48 (.570) 17,78 (.700) 15,75 (.620) 20,57 (.810) 16,51 (.650) 16,64 (.655) 12,70 (.500) 16,64 (.655) 10,80 (.425) 16,64 (.655) 8,89 (.350)
Position Cable Diameter
9, 15 .190/.350
25 .190/.460
37, 50 .300/.680
Materials and Finishes
Backshell Material: Zinc
Backshell Finish: Clear Zinc
Compression Inserts: PVC
Hardware Material: Steel
Hardware Finish: Clear Zinc
Specifications
Attenuation: –50 dB @ 1000 MHz
Temperature Range: –20°C to 80°C
9 and 15 Position 25 Position 37 and 50 Position
D
C
Diecast Shell Shielding Performance
db
Mhz
0
-10
-20
-30
-40
-50
-60
-70100 1,000
Dimensions are shown in mm (inch)
Dimensions subject to change 203
D Subminiature Accessories Metal Backshell
Metal Backshell
Metal Backshells provide strain relief.
Various profiles available for different cable routing
requirements.
Deep Straight Clamp
B
E
CABLE
ENTRY
2X Ø 3,45
(.136)
C
AF
CABLE
ENTRY
G0,38 ± ,013
(.015 ± .005)
H MAX
D MAX
BØ D MAX
CABLE ENTRY
2X Ø 3,05
(.120)
A
C
EG
F
0,38 ± 0,13
(.015 ± .005)
Shell
Size Layout Part
Number Mil Spec
Part Number A
±0,38 (.015) B
±0,572 (.0225) C
±0,13 (.005) D
max. E
±0,38 (.015) F
±0,38 (.015) G
±0,38 (.015) H
max.
DE 9 DE24657 M85049/48-1-1 30,56 (1.203) 12,484 (.4915) 24,99 (.984) 14,68 (.578) 9,53 (.375) 9,53 (.375) 19,05 (.750) 31,75 (1.250)
DA 15 DA24658 M85049/48-1-2 38,89 (1.531) 12,484 (.4915) 33,32 (1.312) 14,68 (.578) 18,11 (.713) 7,93 (.312) 19,05 (.750) 31,75 (1.250)
DB 25 DB24659 M85049/48-1-3 52,78 (2.078) 12,484 (.4915) 47,04 (1.852) 14,68 (.578) 25,40 (1.000) 7,93 (.312) 25,40 (1.000) 39,70 (1.563)
DC 37 DC24660 M85049/48-1-4 69,04 (2.718) 12,484 (.4915) 63,50 (2.500) 14,68 (.578) 34,93 (1.375) 7,93 (.312) 25,40 (1.000) 39,70 (1.563)
DD 50 DD24661 M85049/48-1-5 66,68 (2.625) 15,253 (.6005) 61,11 (2.406) 17,45 (.687) 35,71 (1.406) 10,31 (.406) 28,57 (1.125) 42,88 (1.688)
Round Cable Clamp
Shell
Size Layout Part
Number Mil Spec
Part Number A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005) XD
max. E
±0,38 (.015) F
±0,38 (.015) G
±0,76 (.030)
DE 9 DE44994 M85049/48-2-1 30,68 (1.208) 12,70 (.500) 24,99 (.984) 10,31 (.406) 16,79 (.661) 3,18 (.125) 26,18 (1.031)
DA 15 DA20961 M85049/48-2-2 38,89 (1.531) 12,70 (.500) 33,33 (1.312) 10,31 (.406) 24,99 (.984) 3,18 (.125) 26,18 (1.031)
DB 25 DB20962 M85049/48-2-3 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 15,06 (.593) 38,48 (1.515) 4,75 (.187) 26,98 (1.062)
DC 37 DC20963 M85049/48-2-4 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 18,23 (.718) 55,14 (2.171) 6,35 (.250) 26,98 (1.062)
DD 50 DD20964 M85049/48-2-5 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 20,62 (.812) 53,16 (2.093) 7,92 (.312) 26,98 (1.062)
Product Features
ɀQualified to MIL-Spec M85049
Materials and Finishes
Backshell Material: Low Carbon Steel
Finish: Yellow Chromate over
Cadmium
Hardware Material: Steel
ɀKit consists of 1shell, 2 cable clamps,
2 screws, 2 hex nuts
ɀKit consists of 1shell, 2 screws, 2 hex nuts
Dimensions are shown in mm (inch)
Dimensions subject to change
204
D Subminiature Accessories Metal Backshell
Short Straight Clamp
B
FE
CABLE
ENTRY
2X Ø 3,05
(.120)
A
CG
0,38 ± 0,13
(.015 ± .005)
12,30 ± 0,38
(.484 ± .015)
#4-40 UNC-2B THD
2X MOUNTING HOLES
A
B
CG
H
E
CABLE
ENTRY
F
CABLE
ENTRY
2,77 ± 0,25
(.109 ± .010)
Shell
Size Layout Part
Number Mil Spec
Part Number
No. of
Cable Locking
Screws Included A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005) E
±0,38 (.015) F
±0,38 (.015) G
±0,89 (.035)
DA 15 DA19678-1 M85049/48-3-2 2 38,88 (1.531) 12,70 (.500) 33,33 (1.312) 7,51 (.296) 7,93 (.312) 16,36 (.644)
DB 25 DB19678-2 M85049/48-3-3 2 52,78 (2.078) 12,70 (.500) 47,04 (1.852) 7,51 (.296) 20,22 (.796) 16,36 (.644)
DC 37 DC19678-3 M85049/48-3-4 3 69,04 (2.718) 12,70 (.500) 63,50 (2.500) 7,51 (.296) 17,45 (.687) 16,36 (.644)
DD 50 DD19678-4 M85049/48-3-5 3 66,68 (2.625) 15,47 (.609) 61,11 (2.406) 9,91 (.390) 17,45 (.687) 17,63 (.694)
DE-9 is not available.
Shell
Size Layout Part
Number Mil Spec
Part Number A
±0,38 (.015) B
±0,76 (.030) C
±0,13 (.005) E
±0,76 (.030) F
±0,76 (.030) G
±0,76 (.030) H
±0,76 (.030)
DE 9 DE19977-5 M85049/50-1 30,56 (1.203) 18,24 (.718) 24,99 (.984) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281)
DA 15 DA19977-1 M85049/50-2 38,89 (1.531) 18,24 (.718) 33,33 (1.312) 11,10 (.437) 11,10 (.437) 11,89 (.468) 7,14 (.281)
DB 25 DB19977-2 M85049/50-3 52,78 (2.078) 24,58 (.968) 47,04 (1.852) 11,10 (.437) 15,88 (.625) 11,89 (.468) 7,14 (.281)
DC 37 DC19977-3 M85049/50-4 69,04 (2.718) 30,15 (1.187) 63,50 (2.500) 11,10 (.437) 20,63 (.812) 11,89 (.468) 7,14 (.281)
DD 50 DD19977-4 M85049/50-5 66,68 (2.625) 31,75 (1.250) 61,11 (2.406) 14,28 (.562) 23,01 (.906) 13,49 (.531) 8,71 (.343)
90°Entry
ɀKit consists of 1shell, 2 or 3 screws,
2 or 3 hex nuts
ɀKit consists of 1shell, 1cable clamp, 1screw,
1nut, 2 rivnuts (assembled)
Dimensions are shown in mm (inch)
Dimensions subject to change 205
D Subminiature Accessories Plastic Backshell
Plastic Backshell
Snap-Together Universal
ɀA 2-piece snap-together design for quick
assembly
ɀCustomer furnishes tie-wrap
Materials and Finishes
Material: Black Thermoplastic,
UL 94V-0 rated
C
Ø B MAX
CABLE ENTRY 39,50
(1.555)
42,50
(1.673)
D
Shell
Size Layout Part
Number XB
max. C
±0,20 (.008) D
±0,20 (.008)
DE 9 DE115339-20 7,01 (.276) 17,00 (.669) 19,51 (.768)
DA 15 DA115339-21 9,60 (.378) 17,00 (.669) 27,79 (1.094)
DB 25 DB115339-22 11,61 (.457) 17,00 (.669) 41,61 (1.638)
DC 37 DC115339-23 13,00 (.512) 17,00 (.669) 57,99 (2.283)
DD 50 DD115339-24 16,00 (.630) 19,81 (.780) 52,32 (2.060)
One-Piece Snap-Together
ɀLow cost
ɀEasy to assemble
ɀMounting hardware included
ɀ2 thumbscrews, 2 cable clamps
Materials and Finishes
Backshell Material: Polypropylene
Hardware Material: Steel
Hardware Finish: Yellow chromate over zinc
A
C
CLAMP,
METAL
CLAMP,
THERMOPLASTIC
Ø D MAX
CABLE ENTRY
16,21
(.638) E48,00
(1.890)
Shell
Size Layout Part
Number A C XD
max. E
DE 9 DEBS-9 35,20 (1.386) 24,99 (.984) 5,69 (.224) 27,51 (1.083)
DA 15 DABS-15 43,31 (1.705) 33,33 (1.312) 5,69 (.224) 31,19 (1.228)
DB 25 DBBS-25 57,20 (2.252) 47,04 (1.852) 6,50 (.256) 38,30 (1.508)
DC-37 and DD-50 are not available.
Dimensions are shown in mm (inch)
Dimensions subject to change
206
D Subminiature Accessories Plastic Backshell
One-Piece Plastic
Straight Exit
ɀKit consists of 1shell, 1cable clamp,
1set screw
ɀMounting hardware included
ɀ2 screws #4-24 x 5/16 long self-tapping
ɀAccommodates spring latches
Materials and Finishes
Backshell Material: Black Thermoplastic,
UL 94V-2 rated
Hardware Material: Steel
Hardware Finish: Yellow Chromate over
Cadmium or Zinc
B
CA
D
G
CABLE
ENTRY
Ø E
CABLE
ENTRY
F
CABLE
ENTRY
C
A
B
D
J
CABLE
ENTRY
K
CABLE
ENTRY Ø H
CABLE
ENTRY
Shell
Size Layout Part
Number A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005) D
±0,38 (.015) XE
±0,25 (.010) F
±0,25 (.010) G
±0,25 (.010)
DE 9 DE51218 30,94 (1.218) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281)
DA 15 DA51210 39,27 (1.546) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360)
DB 25 DB51212 53,16 (2.093) 31,75 (1.250) 47,04 (1.852) 12,70 (.500) 12,52 (.493) 9,15 (.360)
DC 37 DC51214 69,44 (2.734) 38,10 (1.500) 63,50 (2.500) 12,70 (.500) 17,63 (.694) 9,15 (.360)
DD 50 DD51216 67,06 (2.640) 38,10 (1.500) 61,11 (2.406) 15,47 (.609) 18,64 (.734) 11,89 (.468)
90°Exit
ɀKit consists of 1shell, 1cable clamp,
1set screw
ɀMounting hardware included
ɀ2 screws #4-24 x 5/16 long self-tapping
Materials and Finishes
Backshell Material: Black Thermoplastic,
UL 94V-2 rated
Hardware Material: Steel
Hardware Finish: Yellow Chromate over
Cadmium or Zinc
Shell
Size Layout Part
Number A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005) D
±0,38 (.015) XH
±0,25 (.010) J
±0,25 (.010) K
±0,25 (.010)
DE 9 DE51219 37,95 (1.494) 25,40 (1.000) 24,99 (.984) 12,70 (.500) 7,14 (.281)
DA 15 DA51211 46,28 (1.822) 25,40 (1.000) 33,33 (1.312) 12,70 (.500) 9,14 (.360)
DB 25 DB51213 60,15 (2.368) 31,75 (1.250) 47,04 (1.852) 12,70 (.500) 12,52 (.493) 9,15 (.360)
DC 37 DC51215 76,43 (3.009) 38,10 (1.500) 63,50 (2.500) 12,70 (.500) 17,63 (.694) 9,15 (.360)
DD 50 DD51217 74,04 (2.915) 38,10 (1.500) 61,11 (2.406) 15,47 (.609) 18,64 (.734) 11,89 (.468)
Dataphone
ɀAvailable in 25 position only
ɀMounting hardware included
ɀ2 screws #4-40 x 11/16 long
Materials and Finishes
Backshell Material: Black Thermoplastic,
UL 94V-0 rated
Hardware Material: Steel
Hardware Finish: Clear Chromate over
Cadmium or Zinc
Shell
Size Layout Part
Number Max. Cable
Entry
DB 25 DB51226-1B 7,92 (.312)
20,22 - 19,43
(.796 - .765)
36,09 - 35,31
(1.421 - 1.390)
3,81 - 3,56
(.150 - .140)
11,18 - 10,41
(.440 - .410)
47,04(1.852) # 4-40 THREADS
56,34 - 55,55
(2.218 - 2.187)
45,72 - 45,21
(1.800 - 1.780)
Dimensions are shown in mm (inch)
Dimensions subject to change 207
D Subminiature Accessories Plastic Backshell
Quick Disconnect for IDC Cable
Materials and Finishes
Material: Black Thermoplastic,
UL 94V-0 rated
CABLE
ENTRY
E
40,54
(1.596)
C
A
LOCKING
SPRING*
LOCKING
HOOK*
2,60 ± 0,20
(.102 ± .008)
16,31
(.642)
Quick Disconnect for Round Cable
Straight and 90°Exit
Shell
Size Layout Part
Number A
max. B
max. C
±0,15 (.006) D
max. E
min. F
min.
DE 9 DE115339 41,33 (1.627) 32,41 (1.276) 25,00 (.984) 16,51 (.650) 7,70 (.303) 6,70 (.264)
DA 15 DA115339-1 49,63 (1.954) 32,41 (1.276) 33,30 (1.311) 16,51 (.650) 7,70 (.303) 6,70 (.264)
DB 25 DB115339-2 63,65 (2.506) 40,44 (1.592) 47,04 (1.852) 16,51 (.650) 7,70 (.303) 17,70 (.697)
DC 37 DC115339-3 79,86 (3.144) 42,42 (1.670) 63,50 (2.500) 16,51 (.650) 7,70 (.303) 17,70 (.697)
DD 50 DD115339-4 77,57 (3.054) 42,42 (1.670) 61,10 (2.406) 19,51 (.768) 10,69 (.421) 17,70 (.697)
Materials and Finishes
Material: Black Thermoplastic,
UL 94V-0 rated
Optional Locking Hardware/Mechanism
Optional hardware provides quick disconnect for
either flat IDC cable or round jacketed cable.
ɀOrder 2 per connector
Material: Corrosion-resistant steel
Locking Hook Locking Spring
Lock Hook
Part Number Lock Spring
Part Number
015-8755-000 259-8760-000
015-8755-001
NOTE: Not for use on rear panel mounted connectors.
Shell
Size Layout Part
Number A
max. C
±0,13 (.005) E
±0,20 (.008)
DE 9 DE115386-1B 40,69 (1.602) 24,99 (.984) 14,99 (.590)
DA 15 DA115386-2B 49,00 (1.929) 33,30 (1.311) 23,29 (.917)
DB 25 DB115386-3B 62,69 (2.468) 47,04 (1.852) 36,98 (1.456)
DC 37 DC115386-4B 79,20 (3.118) 63,50 (2.500) 53,49 (2.106)
IDC
* Order optional locking hardware separately.
* Order optional locking hardware separately.
13,00 (.512)
MAX
16,10 (.634) MAX
7,00 (.276) MAX
LOCKING
SPRING*
LOCKING
HOOK*
C
A
MAX
B
MAX
E
CABLE
ENTRY
MIN
D
MAX
F
CABLE
ENTRY
MIN
ɀKit consists of 1front shell, 1rear shell,
2 strain reliefs, 5 screws
ɀKit consists of 1front shell, 1rear shell,
1cable clamp, 1spacer, 4 self-tapping
screws, 2 machined screws
Dimensions are shown in mm (inch)
Dimensions subject to change
208
D Subminiature Accessories Locking Hardware
Male Screw Lock
Shell Size Part
Number A
±0,38 (.015) B
±0,25 (.010) C
±0,13 (.005)
DE, DA, DB, DC D20419 14,10 (.555) 6,35 (.250) 1,22 (.048)
DE, DA, DB, DC D20419-18 14,10 (.555) 7,14 (.281) 1,70 (.067)
DE, DA, DB, DC D20419-21 14,10 (.555) 7,14 (.281) 2,34 (.092)
DE, DA, DB, DC D20419-104 14,10 (.555) 7,92 (.312) 2,34 (.092)
DD D20420 16,66 (.656) 6,35 (.250) 1,22 (.048)
DD D20420-13 16,66 (.656) 7,14 (.281) 1,70 (.067)
DD D20420-15 16,66 (.656) 7,14 (.281) 2,34 (.092)
DD D20420-86 16,66 (.656) 7,92 (.312) 2,34 (.092)
B
SCREW
#4-40 UNC-2A THD
C
CLIP GAP
A
CLIP
Screw Lock Assemblies
SCREW
CLIP
WITH
THD
NUT
WASHER
LOCK
WASHER
HEX NUT
MOUNTING
PANEL
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
D SUBMINIATURE
CONNECTOR
PIN OR SOCKET
ITT Cannon offers the largest variety of locking and
latching hardware.
Refer to the accessories selection guide on pages
198-199 for use with ITT Cannon backshells.
Product Features
ɀEnsures positive mating
ɀProvides locking and latching for high
vibration applications
ɀKit consists of 1screw and 1clip
ɀOrder 2 per connector
Material: Steel
Finish: Yellow Chromate over
Cadmium or Zinc
Front Panel Mount Rear Panel Mount
Dimensions are shown in mm (inch)
Dimensions subject to change 209
D Subminiature Accessories Locking Hardware
Female Screw Lock
#4-40 UNC-2B THD
REAR FLANGE (REF)
#4-40 UNC-2ATHD
6,35 (.250) APPROX
REMOVE ONE WASHER
FOR EACH 0,76 (.030)
OF PANEL THICKNESS
WHEN REAR MOUNTING
1,52 (.060) MAX PANEL
Front Panel Mount Rear Panel Mount
Yellow Chromate
over Cadmium Mil Spec
Part Number Zinc With
Clear Chromate A
±0,38 (.015)
D20418-2 M24308/26-1 D20418-80 7,92 (.312)
D20418-50 12,70 (.500)
D20418-39 M24308/26-2 15,88 (.625)
D20418-74 19,05 (.750)
Female Screw Lock for High Volume Applications
ɀOrder 2 per connector
ɀTool required for installation. See page 211.
Material: Steel
Finish: Zinc
6,35
Ø (.119)
NOM
Part
Number Thread
Code Nominal Panel Thickness
980-2000-858 #4-40 1,09 – 0,91 (.043 – .036)
980-2000-859 M3 1,09 – 0,91 (.043 – .036)
THD B
THD A
4,50 (.177)
MIN
3,50
(.138)
MIN 5,00 (.197) HEX
(ACROSS FLATS)
5,50
(.217)
5,75
(.226)
Thread Code
Part
Number THD A THD B
D121073-39 #4-40 UNC-2B #4-40 UNC-2A
D121073-40 M3 #4-40 UNC-2A
D121073-41 #4-40 UNC-2B M3
D121073-42 M3 M3
NOTE: (1) A 6 inch/pound (female) and 4 inch/pound (male) maximum torque during assembly is recommended on steel screw
lock assemblies.
(2) A third flat washer is supplied for front panel mounting of tab shell connectors.
NOTE: Not suitable for rear panel mounting.
ɀKit consists of 1nut, 3 washers, 1lock
washer, 1hex nut
ɀOrder 2 per connector
Material: Steel
Screw Locks for Connectors with Integral
Threaded Inserts
ɀKit consists of 1jackpost, 1lock washer
ɀOrder 2 per connector
Material: Brass
Finish: Nickel
Jackpost
4,78 ± 0,38
(.188 ± .015)
4,78 ± 0,38
(.188 ± .015) A
(ACROSS FLATS)
HEX
1,70
(.067)
5,36
(.211) 3,02
(.119)
7,82 ± 0,13
(.308 ± .005)
3,80 (.150)
MIN FULL
THD
6,48 - 6,30
(.255 - .248)
ØØ
Dimensions are shown in mm (inch)
Dimensions subject to change
210
D Subminiature Accessories Locking Hardware
Slide Lock Assemblies
Sliding Lock Retainer Assembly
2,36 (.093)
TRAVEL REF A
C
B
ɀIdeal for Ethernet Applications
ɀKit consists of 1sliding lock plate, 2 mounting
screws, 2 lock washers, 2 hex nuts
ɀOrder 1kit per connector
Description Material Finish/
Treatment
Sliding Lock
Plate Stainless Steel Passivated
Screw,
Mounting
Washer, Lock Steel Yellow
Chromate Over
Cadmium or
Zinc
Nut, Hex
Shell
Size Layout Part
Number A
±0,38 (.015) B
±0,38 (.015) C
±0,13 (.005)
DE 9 DE51224-1 35,05 (1.380) 12,70 (.500) 25,00 (.984)
DA 15 DA51220-1* 43,70 (1.720) 12,70 (.500) 33,32 (1.312)
DB 25 DB51221-1 57,40 (2.260) 12,70 (.500) 47,04 (1.852)
DC 37 DC51222-1 73,86 (2.908) 12,70 (.500) 63,50 (2.500)
DD 50 DD51223-1 71,47 (2.814) 15,47 (.609) 61,11 (2.406)
* Meets IEEE 802.3 Ethernet Specification
ITT Cannon offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 198-199 for use with
ITT Cannon backshells.
Product Features
ɀEnsures positive mating
ɀProvides locking and latching for high
vibration applications
WASHER
LOCK
WASHER,
#4-40
POST
#4-40
NUT, HEX
WASHER, LOCK
NUT, HEX
MOUNTING
SCREW #4-40
SLIDING LOCK
PLATE,
,
,
,
Dimensions are shown in mm (inch)
Dimensions subject to change 211
D Subminiature Accessories Locking Hardware
Slide Lock Post Assemblies
ɀKit consists of 1post, 2 washers, 1lock
washer, 1hex nut
ɀOrder 2 kits per connector
Ø 5,54(.218) 1,52 (.060)
MAX
1,85(.073)
MAX
3,02(.119)
MAX
4,78 ± 0,08
(.118 ± .003)
4,37± 0,13
(.172± .005)
2,44 ± 0,08
(.096 ± .003)
3,63 ± 0,08
(.143 ± .003)
Ø
Ø
Ø
Ø
Slide Lock Post for High Volume Applications
ɀOrder 2 per connector
ɀTool required for installation. See this page.
Materials and Finishes
Material: Stainless Steel
Treatment: Passivated NOTE: Not suitable for rear panel mounting
Tool for High Volume Applications
Part Number: D53018
Materials and Finishes
Material: Steel
Finish: Yellow Chromate over
Cadmium or Zinc NOTE: When rear-mounting connector to a 1/16panel, delete the 2 washers.
Part Number: 980-2000-860
Panel Thickness: 1,09-0,91 (.043-.036)
Part Number: 995-2000-092
(ACR OSS FLATS)
10,57 ± 0,25
(.416 ± .010)
4,60 (.180) HEX
#4-40
NUT, HEX
WASHER, LOCK
WASHER
POST
2,59 ± 0,13
(.102 ± .005)
Dimensions are shown in mm (inch)
Dimensions subject to change
212
D Subminiature Accessories Locking Hardware
Spring Latch Assemblies
ITT Cannon offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 198-199 for use with
ITT Cannon Connectors.
Product Features
ɀLow Cost
ɀMinimizes field connection time
ɀPositive lock between connectors
ɀPackaged 2 kits per bag
Materials and Finishes
Material: Stainless Steel
Treatment: Passivated
LockedUnlocked
Spring Latch Plate Assembly
#4-40
SCREW
PLATE, LATCH
CONNECTOR,
EITHER PIN
OR SOCKET
WASHER, LOCK #4-40
NUT, HEX
Shell
Size Layout Part
Number A
±0,38 (.015) B
±0,38 (.015)
DE, DA, DB, DC 9, 15, 25, 37 D110278 12,42 (.489) 14,35 (.565)
DD 50 D110280 15,47 (.609) 17,09 (.673)
ɀKit consists of 1plate, 1screw, 1lock washer,
1hex nut
ɀOrder 2 kits per connector
Spring Latch Assembly
Shell
Size Layout Part
Number A
±0,38 (.015) B
±0,38 (.015) C
±0,51 (.020)
DE, DA, DB, DC 9, 15, 25, 37 D110277 12,42 (.489) 14,35 (.565) 18,59 (.732)
DD 50 D110279 15,49 (.609) 17,09 (.673) 18,59 (.732)
ɀKit consists of 1spring, 1screw, 1bracket,
1lock washer, 1hex nut
ɀOrder 2 kits per connector
ɀFront panel mounting
* Dimension does not apply to rear panel mounting.
#4-40 NUT, HEX
#4-40 THD x 7,92 (.312)
SCREW 2,41 - 1,52
(.095 - .060)
PLATE,
LATCH
15,57 ± 0,64
(.613 ± .025)
AB
SPRING LATCH
MOUNTING PLATE
#4-40 THD x 7,92 (.312)
SCREW
#4-40 NUT, HEX
*2,41 - 1,52
(.095 - .060)
C
LATCH, SPRING
#4-40
SCREW
SPRING LATCH
MOUNTING BRACKET
CONNECTOR,
EITHER PIN
OR SOCKET
WASHER, LOCK #4-40
NUT, HEX
LATCH, SPRING
Dimensions are shown in mm (inch)
Dimensions subject to change 213
D Subminiature Accessories Locking Hardware
#4-40 UNC
THREAD
0,89 ± 0,13
(.035 ± .005)
0,64 ± 0,13
(.025 ± .005)
Ø 5,59 (.220)
MAX
1,73 (.068)
MAX
Ø 5,59 (.220)
MAX
9,40 (.370)
MAX
16,26 (.640)
MAX
4,57 (.180)
MAX
CONNECTOR
ASSEMBLY
4,75 (.187) HEX
(ACROSS FLATS)
CONNECTOR
ASSEMBLY #4-40 UNC THREAD
#4-40 UNC THREAD
PANEL 3,18 (.125)
MAX
1,14 ± 0,13
(.045 ± .005)
14,10 ± 0,13
(.555 ± .005)
5,84 ± 0,13
(.230 ± .005)
5,59 (.220) MIN
PERFECT THD
ɀKit consists of 2 studs, 2 heads, 1tube
retaining compound
ɀOrder one kit per connector
Part Number: D110550
Materials and Finishes
Material: Stainless Steel
ɀKit consists of 2 posts, 2 hex nuts, 2 lock
washers
ɀOrder one kit per connector
Part Number: D110551
Materials and Finishes
Material: Stainless Steel
Treatment: Passivated NOTE: Jackpost is not compatible with rear-panel mount connectors.
Jackscrew/Jackpost Assemblies
Jackpost Assembly Jackscrew Assembly
Jackpost Assembly
Jackscrew Assembly
ITT Cannon offers the largest variety of locking and
latching hardware. Refer to the accessories
selection guide on pages 198-199 for use with
ITT Cannon Connectors.
#2-56 UNC THD
HEAD,
JACKSCREW
STUD, JACKSCREW
RETAINING
COMPOUND
Ø 3,05 (.120)
FEMALE POST
#4-40 UNC-2A THD
#4-40 UNC-2B THD
Ø 3,05 (.120)
WASHER,
#4 LOCK
#4 HEX NUT
#4-40 UNC THD
Dimensions are shown in mm (inch)
Dimensions subject to change
214
D Subminiature Accessories Guide Pin Plate
Female
MOUNTING
PANEL
9,60 (.378)
MAX
1,57
(.062)
6,35 (.250) MAX
SOLDER POT
EXTENSION
F
J
F
2X R K
2X Ø 3,66 0,13
(.144 .005)
2X Ø 4,22 ± 0,05
(.166 .002)
B
E
DH
ɀUseful in blind mate applications.
ɀKit consists of 1plate, 2 screws
ɀGuide pin inserts for Size 8 cavities for
Combo Dconnectors also available. See
page 95.
Recommended Panel Cutout
Shell
Size Layout Part
Number A
±0,41 (.016) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,13 (.005) F
±0,13 (.005) G
±0,41 (.016) H
±0,41 (.016) J
±0,41 (.016) K
±0,41 (.016)
DE 9 DE111920 49,61 (1.953) 40,08 (1.578) 25,00 (.986) 18,65 (.734) 15,27 (.601) 9,52 (.375) 25,40 (1.000) 30,58 (1.204) 12,29 (.484) 6,15 (.242)
DA 15 DA22214 57,96 (2.282) 48,41 (1.906) 33,32 (1.312) 22,81 (.898) 19,43 (.765) 9,52 (.375) 25,40 (1.000) 38,91 (1.532) 12,29 (.484) 6,15 (.242)
DB 25 DB22254 71,63 (2.820) 62,13 (2.446) 47,04 (1.852) 29,67 (1.168) 26,29 (1.035) 9,52 (.375) 25,40 (1.000) 51,21 (2.016) 11,91 (.469) 5,94 (.234)
DC 37 DC22071 88,11 (3.469) 78,59 (3.094) 63,50 (2.500) 37,90 (1.492) 34,52 (1.359) 9,52 (.375) 25,40 (1.000) 67,49 (2.657) 11,91 (.469) 5,94 (.234)
DD 50 DD21961 85,72 (3.375) 76,20 (3.000) 61,11 (2.406) 36,50 (1.437) 33,32 (1.312) 11,10 (.437) 28,58 (1.125) 65,10 (2.563) 14,30 (.563) 7,16 (.282)
Guide Pin Plate
Plate and Hardware Material: Steel
Plate and Hardware Finish: Yellow Chromate
over Zinc or
Cadmium
Dimensions are shown in mm (inch)
Dimensions subject to change 215
D Subminiature Accessories Guide Pin Plate
Male
4,78 ± 0,30
(.188 ± .012)
1,57 ± 0,13
(.062 ± .005)
8,71 ± 0,38
(.343 ± .015)
4,06 ± 0,25
(.160 ± .010)
22,22 ± 0,76
(.875 ± .030)
Ø 4,01 (.158)
MAX
1,57 (.062)
MAX
Ø 4,06 (.160)
REF MAX
6,35 (.250) MAX
SOLDER POT
EXTENSION
ITT CANNON
2X Ø 3,66 ± 0,13
(.144 ± .005)
A
B
C
D
G
EF
2X MOUNTING HOLE
#4-40 UNC-2B THD
H
2X R K
2X Ø 3,66 ± 0,13
(.144 ± .005)
2X Ø 5,54 ± 0,13
(.218 ± .005)
B
C
D
F
J
Recommended Panel Cutout
ɀUseful in blind mate applications.
ɀKit consists of 1plate, 2 sems screws,
2 rivets, 2 guide pins, 2 washers
ɀGuide pin inserts for Size 8 cavities for
Combo Dconnectors also available. See
page 95.
Plate and
Hardware Material: Steel
Plate and
Hardware Finish: Yellow Chromate over
Zinc or Cadmium
Guide Pin Material: Stainless Steel
Shell
Size Layout Part
Number A
±0,38 (.015) B
±0,13 (.005) C
±0.25 (.010) D
±0,13 (.005) E
±0,38 (.015) F
±0,25 (.010) G
±0.13 (.005) H
±0.25 (.010) J
±0.38 (.015) K
±0,13 (.005)
DE 9 DE111919 49,61 (1.953) 40,08 (1.578) 33,91 (1.335) 18,65 (.734) 25,40 (1.000) 19,05 (.750) 25,00 (.984) 12,29 (.484) 30,58 (1.204) 6,15 (.242)
DA 16 DA22213 57,94 (2.281) 48,41 (1.906) 42,24 (1.663) 22,81 (.898) 25,40 (1.000) 19,05 (.750) 33,32 (1.312) 12,29 (.484) 38,89 (1.531) 6,15 (.242)
DB 25 DB22255 71,63 (2.820) 62,13 (2.446) 55,96 (2.203) 29,67 (1.168) 25,40 (1.000) 19,05 (.750) 47,04 (1.852) 12,29 (.484) 51,99 (2.047) 6,15 (.242)
DC 37 DC22070 88,09 (3.468) 78,42 (3.094) 72,42 (2.851) 37,90 (1.492) 25,40 (1.000) 19,05 (.750) 63,50 (2.500) 12,29 (.484) 68,25 (2.687) 6,15 (.242)
DD 50 DD21962 85,72 (3.375) 76,20 (3.000) 69,82 (2.749) 36,50 (1.437) 28,58 (1.125) 22,20 (.874) 61,11 (2.406) 15,06 (.593) 66,93 (2.635) 7,52 (.296)
Guide Pin Plate
Dimensions are shown in mm (inch)
Dimensions subject to change
216
Shell Part A B C
Size Layout Numbers ±0,40 (.015) ±0,25 (.010) ±0,25 (.010)
DE 9 DEBU111515 30,81 (1.213) 24,99 (.984) 16,92 (.666)
DA 15 DABU111512 39,14 (1.541) 33,32 (1.312) 25,25 (.994)
DB 25 DBBU111511 53,04 (2.088) 47,04 (1.852) 38,96 (1.534)
Note: DC-37 and DD-50 not available.
D Subminiature Accessories Connector Saver
Connector Saver
Engaging Face, Pin Side
Connector Saver
Specifications
Temperature: 55°C to 105°C
Current Rating: 7 A
Dielectric Withstanding Voltage: 500 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shells Steel Tin/Lead
Insulator Black Thermoplastic, UL 94V-0
Contacts Copper Alloy Gold Over Nickel
Spacer Zinc Alloy
Locking Hardware Steel Clear Chromate Over Zinc
Connector Savers are used to minimize wear on
cable or panel connectors.
Note: Hardware removed for clarity.
A
B
C
2X 10°CONTACT
SHELL,
PIN FRONT
SHELL,
SOCKET FRONT
SPACER
INSULA T OR ASSY
SOCKET
5,97 ± 0,25
(.235 ± .010) 6,17 ± 0,25
(.243 ± .010)
21,95 ± 0,51
(.864 ± .020)
Dimensions are shown in mm (inch)
Dimensions subject to change 217
D Subminiature Accessories Gender Changer
Male/Male
CONTACT
PIN
FRONT SHELL
RIVET FRONT SHELL
INSULATOR–PC BOARD
14,50 ± 0,64
(.571 ± .025)
5,84 ± 0,15
(.230 ± .006)
5,84 ± 0,15
(.230 ± .006)
2X 10°2X Ø 3,05
(.120)
7,90 ± 0,13
(.311 ± .005)
A
B
C
12,55 ± 0,38
(.494 ± .015)
INSULATOR
SOCKET
CONTACT
FRONT
SHELL
INSULATOR
FRONT
SHELL
13,11 ± 0,51
(.516 ± .020)
6,17 ± 0,13
(.243 ± .005)
6,17 0,13
(.243 ± .005)
0,76 ± 0,26
(.030 ± .010)
±
Pin
Female/Female
Socket
Gender Changer
Specifications
Temperature: 55°C to 105°C
Current Rating: 3 A
Dielectric Withstanding Voltage: 500 VAC at Sea Level
Materials and Finishes
Description Material Finish
Shells Steel Tin/Lead
M/M Glass Epoxy
Insulator F/F Black Thermoplastic, UL 94V-0
Contacts Copper Alloy Gold Over Nickel
Rivets (M/M) Copper Alloy Tin/Lead
Locking Hardware Steel Clear Chromate Over
Cadmium or Zinc and Mylar
Gender Changers modify the mating interface to
allow connectors of the same genders to mate.
Product Features
ɀLow cost way to correct design errors
ɀOptional hardware allows design flexibility
Shell Part Number Part Number A B C
Size Layout Without Hardware With Hardware ±0,38 (.015) ±0,13 (.005) ±0,13 (.005)
DE 9 DE111805-1 DE111805-5 30,81 (1.213) 24,99 (.984) 16,92 (.666)
DA 15 DA111806-1 DA111806-5 39,14 (1.541) 33,32 (1.312) 25,25 (.994)
DB 25 DB111807-1 DB111807-5 53,04 (2.088) 47,04 (1.852) 38,96 (1.534)
DC 37 DC111808-1 DC111808-5 69,32 (2.729) 63,50 (2.500) 55,42 (2.182)
Note: DD-50 not available in male/male.
Shell Part Number Part Number A B C
Size Layout Without Hardware With Hardware ±0,38 (.015) ±0,13 (.005) ±0,13 (.005)
DE 9 DE111813 DE111813-3 30,81 (1.213) 24,99 (.984) 16,33 (.643)
DA 15 DA111810 DA111810-3 39,14 (1.541) 33,32 (1.312) 24,66 (.971)
DB 25 DB111811 DB111811-2 53,04 (2.088) 47,04 (1.852) 38,38 (1.511)
Note: DC-37 and DD-50 not available for female/female.
Gender Changers modify the mating interface to
allow connectors of the same genders to mate.
Product Features
ɀLow cost way to correct design errors
ɀOptional hardware allows design flexibility
Note: Grounding dimples available on male/male only.
2X 10°
8,36 ± 0,13
(.329 ± .005)
2X Ø 3,43
(.135)
PIN 1
FRONT
SIDE
PIN 1
REAR
SIDE
A
B
C
12,55 ± 0,38
(.494 ± .015)
Dimensions are shown in mm (inch)
Dimensions subject to change
218
D Subminiature Accessories Miscellaneous
Dust Cap
RAISED GATE MARK
ITT CANNON
XX-XX-XX D
6,35 (.250)
B
1,02 W ALL
(.040)
A
C
NOTE: C dim. applies at point of maximum integral interface length.
Dust caps provide protection from moisture and
dust for unused I/O ports.
Product Features
ɀConductive Dust Caps provide a surface
resistivity of at least 1x 105ohms/sq
ɀDust Caps meet the static decay test
requirements of MIL-B-81705C, Type II.
ɀDust Caps have an integral flange for easy
application and removal.
Materials and Finishes
Material: Black Polyethylene
Part Number I.D. A B C D
DE-59-20 Socket 20,32 (.800) 11,43 (.450) 16,36 (.644) 7,59 (.299)
DA-59-20 Socket 28,45 (1.120) 11,68 (.460) 24,59 (.968) 7,62 (.300)
DB-59-20 Socket 42,42 (1.670) 11,68 (.460) 38,25 (1.506) 7,49 (.295)
DC-59-20 Socket 58,93 (2.320) 11,68 (.460) 54,81 (2.158) 7,37 (.290)
DD-59-20 Socket 56,90 (2.240) 14,48 (.570) 53,11 (2.091) 10,41 (.410)
DE-60-20 Pin 21,84 (.860) 12,95 (.510) 17,78 (.700) 8,92 (.351)
DA-60-20 Pin 30,48 (1.200) 12,95 (.510) 26,52 (1.044) 9,02 (.355)
DB-60-20 Pin 44,20 (1.740) 13,46 (.530) 39,60 (1.559) 9,09 (.358)
DC-60-20 Pin 60,71 (2.390) 13,46 (.530) 56,90 (2.240) 9,37 (.369)
DD-60-20 Pin 58,17 (2.290) 16,00 (.630) 54,28 (2.137) 12,04 (.474)
Interfacial Seal
Interfacial seals provide moisture resistance at the
mating interface.
Product Features
ɀOther Interfacial Seals in the Combo D
layouts are available upon request.
Materials and Finishes
Material: Silastic Sheet
Shell Size Layout Part Number A B
DE 9 DE53750 16,66 (.656) 8,41 (.331)
DA 15 DA53750-1 24,99 (.984) 8,41 (.331)
DB 25 DB53750-2 38,88 (1.531) 8,41 (.331)
DC 37 DC53750-3 55,14 (2.171) 8,41 (.331)
DD 50 DD53750-4 52,78 (2.078) 11,10 (.437)
DC 21WA4 075-0354-003 55,14 (2.171) 8,41 (.331)
2X Ø 3,25 (.128)
15,20
(.600)
4,70 (.185)
0,76 (.030)
Shell
Size Layout Part
Number
DE 9 DE50904-1
DA 15 DA50905-1
DB 25 DB50906-1
DC 37 DC50907-1
DD 50 DD50908-1
Materials and Finishes
Material: Nylon
Color: Natural (white)
Potting Shell
Potting shells are molded with a thin flange
0,76 (.030) to permit the use of D Subminiature
locking devices.
Potting shells hold epoxy in place during curing.
2X 10°
Dimensions are shown in mm (inch)
Dimensions subject to change 219
D Subminiature
Selection Index Page
Reader’s Resource
Dimensional Reference Data
Panel Mounting .......................................................220
Panel Cutouts ........................................................221
Contact Cavity Arrangements
Combo D— Plug ....................................................222
Combo D— Receptacle ...............................................223
Standard — Plug and Receptacle .........................................224
Pushfit/Boardlock — Standard and European .................................225
Alternate Technical Configurations
50 Ohm Coaxial Contact — Straight and 90°.................................225
Bracket — Standard and European ........................................226
Hardware Views
Standard ............................................................226
European............................................................227
Printed Circuit Board (PCB) Hole Patterns
Combination Layouts
Coaxial 90°— Standard
Plug............................................................228
Receptacle .......................................................231
Coaxial 90°— European
Plug............................................................234
Receptacle.......................................................236
Coaxial Straight — Standard/European
Plug............................................................238
Receptacle .......................................................241
High Power 90°— Standard
Plug............................................................244
Receptacle.......................................................247
High Power 90°— European
Plug............................................................250
Receptacle.......................................................252
High Power/High Voltage Straight — Standard/European
Plug............................................................254
Receptacle.......................................................257
90°PC Tails (Size 20 Signal Contacts only) — European
Plug............................................................260
Receptacle.......................................................263
Straight PC Tails (Size 20 Signal Contacts only) — Standard/European
Plug............................................................266
Receptacle.......................................................269
Standard Layouts
90°Standard — Plug and Receptacle ....................................272
90°European — Plug and Receptacle ....................................273
Straight PC Tails — Plug and Receptacle Standard/European ...................274
Lease Tooling .........................................................275
Glossary of Terms ......................................................276
Obsolete Products/Available Products Not Previously Listed .....................282
Part Number Index......................................................283
Product Safety and Warranty..............................................297
R e a d e r ’ s R e s o u r c e
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Panel Mounting
Figure 1 A Figure 1 B
Figure 2 Figure 3
Figure
Number Combination of Mated Connectors A
+0,76 (.030) B
+0,76 (.030) C
+0,76 (.030) F
±0,25 (.010) H
+0,76 (.030)Size Pin (See Note Below) Socket
1A, 1B A, E Standard Standard 6,35 (.250) 8,63 (.340) 7,49 (.295) 7,49 (.295)
1A, 1B B, C, D Standard Standard 6,04 (.238) 8,71 (.343) 7,56 (.298) 7,18 (.283)
2 A, E Standard Float Mount 5,53 (.218) 6,68 (.263) 3,04 (.120)
2 B, C, D Standard Float Mount 5,23 (.206) 6,75 (.266) 3,04 (.120)
2 A, E Float Mount Standard 5,53 (.218) 6,68 (.263) 3,04 (.120)
2 B, C, D Float Mount Standard 5,23 (.206) 6,37 (.251) 3,30 (.130)
3 A, E Standard Reverse Float Mount 9,09 (.358) 7,95 (.313) 3,04 (.120)
3 B, C, D Standard Reverse Float Mount 9,16 (.361) 7,64 (.301) 3,04 (.120)
3 A, E Reverse Float Mount Standard 9,09 (.358) 7,95 (.313) 3,04 (.120)
3 B, C, D Reverse Float Mount Standard 9,01 (.355) 7,87 (.310) 3,30 (.130)
Notes:
1. A, B, C and H are dimensions between panels and represent
the recommended limit to be used in the design of the
connector mounting method.
2. It is recommended that only one assembly, either pin or
socket, be float mounted.
3. Standard pin assemblies contained 0,38 (.015) thick front
shells on E and A sizes; 0,61 (.024) thick front shells on B,
C, and D sizes.
4. Standard connectors accommodate a #4 screw. Float
mount connectors accommodate a #2 screw.
R e a d e r ’ s R e s o u r c e
220
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Panel Cutouts
Standard Shell
Shell
Size Mounting
Method A
±0,13 (.005) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,13 (.005) F
±0,13 (.005) G
±0,05 (.002) H
±0,05 (.002) J
±0,05 (.002)
DE Front 22,19 (.874) 11,09 (.437) 24,99 (.984) 12,49 (.492) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083)
Rear 20,47 (.806) 10,23 (.403) 24,99 (.984) 12,49 (.492) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132)
DA Front 30,53 (1.202) 15,26 (.601) 33,32 (1.312) 16,66 (.656) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083)
Rear 28,80 (1.134) 14,40 (.567) 33,32 (1.312) 16,66 (.656) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132)
DB Front 44,27 (1.743) 22,14 (.872) 47,04 (1.852) 23,52 (.926) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083)
Rear 42,51 (1.674) 21,25 (.837) 47,04 (1.852) 23,52 (.926) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132)
DC Front 60,73 (2.391) 30,37 (1.196) 63,50 (2.500) 31,75 (1.250) 13,03 (.513) 6,52 (.257) 3,04 (.120) 1,52 (.060) 2,10 (.083)
Rear 59,08 (2.326) 29,54 (1.163) 63,50 (2.500) 31,75 (1.250) 11,40 (.449) 5,71 (.225) 3,04 (.120) 1,52 (.060) 3,35 (.132)
DD Front 58,34 (2.297) 29,18 (1.149) 61,11 (2.406) 30,55 (1.203) 15,82 (.623) 7,92 (.312) 3,04 (.120) 1,52 (.060) 2,10 (.083)
Rear 56,33 (2.218) 28,16 (1.109) 61,11 (2.406) 30,55 (1.203) 14,09 (.555) 7,06 (.278) 3,04 (.120) 1,52 (.060) 3,35 (.132)
Standard Cutout Rear Mounting Cutout (Optional)
Front Panel Mounting
Standard Shell Dual Float Mount Shell
Rear Panel Mounting
Standard Shell Dual Float Mount Shell
Dual Float Mount Shell
Shell
Size Mounting
Method A
±0,13 (.005) B
±0,13 (.005) C
±0,13 (.005) D
±0,13 (.005) E
±0,13 (.005) F
±0,13 (.005) G
±0,05 (.002) H
±0,05 (.002) J
±0,05 (.002)
DE Front 23,01 (.906) 11,50 (.453) 24,99 (.984) 12,49 (.492) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083)
Rear 21,28 (.838) 10,64 (.419) 24,99 (.984) 12,49 (.492) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132)
DA Front 31,34 (1.234) 15,67 (.617) 33,32 (1.312) 16,66 (.656) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083)
Rear 29,61 (1.166) 14,80 (.583) 33,32 (1.312) 16,66 (.656) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132)
DB Front 45,08 (1.775) 22,55 (.888) 47,04 (1.852) 23,52 (.926) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083)
Rear 43,33 (1.706) 21,66 (.853) 47,04 (1.852) 23,52 (.926) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132)
DC Front 61,54 (2.423) 30,78 (1.212) 63,50 (2.500) 31,75 (1.250) 13,84 (.545) 6,93 (.273) 2,23 (.088) 1,11 (.044) 2,10 (.083)
Rear 59,79 (2.354) 29,89 (1.177) 63,50 (2.500) 31,75 (1.250) 12,21 (.481) 6,12 (.241) 2,23 (.088) 1,11 (.044) 3,35 (.132)
DD Front 59,15 (2.329) 29,59 (1.165) 61,11 (2.406) 30,55 (1.203) 16,63 (.655) 8,33 (.328) 2,23 (.088) 1,11 (.044) 2,10 (.083)
Rear 57,15 (2.250) 28,57 (1.125) 61,11 (2.406) 30,55 (1.203) 14,90 (.587) 7,46 (.294) 2,23 (.088) 1,11 (.044) 3,35 (.132)
R e a d e r ’ s R e s o u r c e
221
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Plug Contact Cavity Arrangements — Combo D
A2A1 A3 2A2
3
A1
5
4
1
7
A1 6
1
10
4
23
9
5
8
3
1
4
A1 2
3 1 5 2 4 A1 1
A3
4
A2 2
35
A4 5
A2
10
3
69
A1
A3
7
21
8
4
2
814
A1
12
6
15
7
9
4A2
1
10 1311
3510
20191817
9
16
876
A1
5
15
432
12
1
1311 14
A7A1 A2 A5A3 A6 A8A4
6
A5 2 3
A4A2 14
A3
A1 A6
579 12
11
10
A3
3A5
8
14
7
A2 2A4
A1 65
987
17
A2 6
16
A1
15
5
10
4
13
A3 A4
12
321
14
11
1A3
11910
20
8
19
18
7
1716
56
15
4
21
13
3
14
12
2
A1
22
A2 7113 12105
14 23
138
18
9
17 22 25
19
1
24
4
16
A2
15 20
A1 2
21
6
6 7 12 17
16
A4
11
A1 A2 A6
34
A3
513 15
9
A5 A7
814
10
12 17 19 21
A1
20 24
16 18 23
22
A2 A3 1
9
23
10
4
11
25
5
12
26
6
13
7
27
14
8
28
15
29
A4
30 31 32
1614
6
26
A1
15
1
17
A2
25
4
4140393837
36
24
35
23
12
34
11
22
33
21
10
32
9
20
31
19
8
30
18
7
29
2
13
3
2827
5155
19 20
6
4
26
18
3
21
72
17
8
22
1
16 23 28 29
36
9
27
3937 38
10
41
11 12 14
13
43
25
45
24
40 44
42
35 46
31 3230 33 34
A1
Shell Size
Contact Arrangment
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts.
Face View Pin Insert
A1 A3
A
3WK3
0
3
R e a d e r ’ s R e s o u r c e
222
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Receptacle Contact Cavity Arrangements — Combo D
3
A1
2
4
1A2A3 A1 A2
54
A1
3
21
8
45
10
2A1 361
97
2
12 1114
3
A3
15 1016
A4 9
17
8175
4A1A2
13
6
22 21
11 10 9
20
8
19 17
7
18
65
16
4
15 13
3
14
21
12
A2 A1
A3 13
25
12 11 10
24
9
22
23 21
87
19
20
65
18
43
17
2
1516 14
1A1
A2
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
1 2 3 5 4 A2
4
A4 A3
21
5
A1
3
A3
6
A1 12
10
3
7
4
8
5A2
9
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
15 9
4
12 11
53
62
10
1
7
13
A2
8
A1
14
A1
65
17
74
18
83
19 12
9
20
2
10 1
13
16 14 11
15
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
A4A6A8 A3 A1A5 A2A7 A2
13
5
A1A6
7
24
6
A5 A4 A3 A1
43
A5 A4
12 11
A3
10 9 8
65
7
2A2
1
Shell Size
Contact Arrangement
No. of Size 20 Cavitites
No. of Size 8 Cavities
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
10 916
A1
431517
A2
2613
A4
14 11 581
A3
712
A6 A5A7
9
24 22 16
11
2
29
12
15 13
4
2627
10
1
28
78
A4 3
30 23
A3
31
14
5
32
6
21
A1
25
A2
17
20 19 18
Shell Size
Contact Arrangement
No. of Size 20 Contacts
No. of Size 8 Contacts
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
15
27
5
18
29
A1
39
8
19
3140
7
32
16
41
23
23
3336 35
12
1721
34
14
61011
20
4
24 22
37 30
9
38 26
13
25
1
28
A2 15
40
29
9
22
38
6
21
37
5
20
36
4
19
35
3
18
2
34
17
1
33
16
324546
28
44
14
26
13
27 25
11
24
12
43 42
10
23
41
78
39 31 30
A1
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
Note: Size 8 Cavities will Accommodate Removable Coaxial, High Power and/or High Voltage Contacts.
Face View Socket Insert
A
3WK3
0
3
A2A3 A1
R e a d e r ’ s R e s o u r c e
223
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Plug Contact Cavity Arrangements
9
4
7
68
25
13
12
3
15
10
128
13
11
457
9
6
14 25
24
10
23
13
22
21
11
2019
9
18
8
17
16
7
6
3
14
4
15
5
1212
27 22
26
29 24
30
89
31 23
3233
34 20
35
7
36
1011 65
12 413
14 315 2116
17
1819
37 25
28 21 49 48 34
353637
3
50
2
16 117
26 2527
910
43 42
28 24 23
29
41
11 8
44
22
30
31 21
7
40
45
12
32 20 19
33
13
39
18
6
46
14 5
47 38
15 4
Face View Pin Insert
Shell Size
Contact Arrangement
Contact Size
E
9
#20
A
15
#20
B
25
#20
Shell Size
Contact Arrangement
Contact Size
C
37
#20
D
50
#20
Receptacle Contact Cavity Arrangements
Face View Socket Insert
Shell Size
Contact Arrangement
Contact Size
E
9
#20
A
15
#20
B
25
#20
Shell Size
Contact Arrangement
Contact Size
C
37
#20
D
50
#20
61
21 18
957
19
20
812
16
411 213 3
23 14
24
25 15
17
22
10
2722 26 2924 30
89
3123 32 33 3420 35
7
36
10 11
65 12413
14
315
2
1 16 17 18 19
3725 2821 4948
34 35 36 37
3
50
2161 17
2625 27
910
4342
28
24
23 29
41
118
44
22 30 31
21
7
40 45
12
32
20
19 33
13
39
18
6
46
145
4738
15
4
9
4
76
8
25 13
R e a d e r ’ s R e s o u r c e
224
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Pushfit/Boardlock — Standard
Pushfit/Boardlock — European
Straight (-146) 90°(-146)
Alternate 50 Ohm Coaxial Configuration
Straight (X) 90°(X)
Straight (Z) 90°(C)
0,62 (.024)
Ø 0,79 (.031)
2,54 (.100)
6,96 (2.74)
MIN
5,59 (.220)
MIN
Ø 0,79 (.031)
2,54 (.100)
11,94 ± 0,33
(.470 ± .013)
0,62 (.024)
R e a d e r ’ s R e s o u r c e
225
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Reader’s Resource
Hardware Views (Standard)
Ø 3,05 (.120)
K
Ø 4,11 (.162)
K4,19 (.165)
MAX
0,60 (.025)
MAX.
#4-40 UNC
OVERALL FREE FLOAT
0,10 - 0,30
(.004 - .012)
0,79 (.031)
OTAL DIAMETRICAL FLOAT
(FOR MISALIGNMENT)
0,79 ± 0,13
(.031 ± .005)
WASHER
3,30 (.130)
MAX.
Ø 2,26 ± 0,08
(.089 ± .003)
RIVET
Alternate Bracket Configuration
Supplied with connectors without boardlocks.
Dimensions
Shell
Size R
±0,25 (.010) S
±0,25 (.010)
DE, DA, DB, DC 11,61 (.457) 12,78 (.503)
DD 12,78 (.503) 13,95 (.549)
Through Hole (Eyelet) Clinch Nut (E)Tab Shells (K)
Dual Float Mount (Y)Dimensions — Plug
Shell Size K
±0,317 (.0125) K
±0,25 (.010)
DE 1,206 (.0475)
DA 1,206 (.0475)
DB 1,52 (.060)
DC 1,52 (.060)
DD 1,52 (.060)
Dimensions — Receptacle
Shell Size K
±0,318 (.0125)
DE 1,206 (.0475)
DA 1,206 (.0475)
DB 1,206 (.0475)
DC 1,206 (.0475)
DD 1,206 (.0475)
Standard Footprint (P) European Footprint (P)
RS
R e a d e r ’ s R e s o u r c e
226
Dimensions are shown in mm (inch)
Dimensions subject to change 227
D Subminiature Reader’s Resource
Hardware Views (European)
Ø 3,05 (.120)
2,80 (.110)
M3
#4-40 UNC-3B
Ø 3,05(.120) M3
#4-40 M3
#4-40
Ø 3,05(.120) M3
#4-40 M3
#4-40
Through Hole Clinch Nut (X/E)
Plastic Bracket with Bushing (1A5N) Plastic Bracket with Captive Nut (1ATN/1AVN) Plastic Bracket with Post (1APN/1A6N)
Metal Bracket with Bushing (1AFN) Metal Bracket with Captive Nut (1A9N/1A7N) Metal Bracket with Post (1AHN/1A8N)
R e a d e r ’ s R e s o u r c e
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard Coaxial 90°— Plug
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
7,19 (.283)
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting Hole
Signal
Contact
25,00 (.984)
2,84 (.112)
2,54 (.100)
2,54 (.100)
9,40
(.370)
Coax
Contact
Mounting
Hole
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
33,32 (1.312)
2,54 (.100)
2,54 (.100)
Coax
Contact
9,40 (.370)
Mounting
Hole
Signal
Contact
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
2,84 (.112)
7,19
(.283)
5,49
(.216)
6,86
(.270) 6,86
(.270)
2,74 (.108)
33,32 (1.312)
2,54 (.100)
2,54 (.100)
Coax
Contact
9,40 (.370)
Mounting
Hole
Signal
Contact
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23 (.324) 8,23 (.324)
8,23 (.324)
6,86 (.270)
9,60 (.378) 6,86 (.270)
9,60 (.378)
33,32 (1.312)
2,54 (.100)
2,54 (.100)
9,40
(.370)
Coax
Contact
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,40 (.370)
14,48 (.570)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
7,67 (.302) 5,94 (.234)
0,86 (.034)
47.04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,40 (.370)
7,77 (.306)
14,48 (.570)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
4,14
(.163)
47,04 (1.852)
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,40 (.370)
7,77 (.306)
14,48 (.570)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
4,14
(.163)
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84
(.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
2,54 (.100)
2,54 (.100)
Coax
Contact
9,40 (.370)
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 2,84
(.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
2,54 (.100)
2,54 (.100)
9,40 (.370) Coax
Contact
47,04 (1.852)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
228
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard Coaxial 90°— Plug
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
63,50 (2.500)
9,40 (.370)
3,81 (.150)
10,16 (.400)
2,54 (.100)
2,54 (.100)
22,86 (.900)
15,24 (.600) 16,51(.650)
Coax
Contact
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37 (.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
24,84 (.978)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
63,50 (2.500)
2,54 (.100)
2,54 (.100)
22,56 (.888)
15,82 (.623)
Coax
Contact
9,09 (.358)
2,36 (.093)
9,40 (.370)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
7,19 (.283) 9,40 (.370)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
15,70 (.618) 15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
7,19 (.283) 9,40 (.370)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
15,70 (.618) 15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
7,19 (.283) 9,40 (.370)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
15,70 (.618)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
229
Dimensions are shown in mm (inch)
Dimensions subject to change
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #20
D
47W1
46 #20
1 #20
2,84 (.112)
61,12 (2.406)
5,54(.218)
5,54(.218)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,84 (.112)
13,72 (.540)
20,57 (.810)
6,86 (.270)
2,54 (.100)
2,54 (.100)
9,40 (.370) 10,06 (.396)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
20,57 (.810)
4,14 (.163)
Mounting Hole
Signal Contact
Coax
Contact
2,84 (.112)
61,12 (2.406)
5,54(.218) 5,54(.218)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,54 (.100)
2,54 (.100)
9,40 (.370)
10,06 (.396)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting Hole
Signal Contact
Coax
Contact
PCB Hole Pattern — Standard Coaxial 90°— Plug
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
230
Dimensions are shown in mm (inch)
Dimensions subject to change 231
PCB Hole Pattern — Standard Coaxial 90°— Receptacle
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
7,19 (.283)
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting Hole
Signal
Contact
25,00 (.984)
2,84 (.112)
2,54 (.100)
2,54 (.100)
9,40
(.370)
Coax
Contact
Mounting
Hole
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
33,32 (1.312)
2,54 (.100)
2,54 (.100)
Coax
Contact
9,40 (.370)
Mounting
Hole
Signal
Contact
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
2,84 (.112)
7,19
(.283)
5,49
(.216)
6,86
(.270) 6,86
(.270)
2,74 (.108)
33,32 (1.312)
2,54 (.100)
2,54 (.100)
Coax
Contact
9,40 (.370)
Mounting
Hole
Signal
Contact
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23 (.324) 8,23 (.324)
8,23 (.324)
6,86 (.270)
9,60 (.378) 6,86 (.270)
9,60 (.378)
33,32 (1.312)
2,54 (.100)
2,54 (.100)
9,40
(.370)
Coax
Contact
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,40 (.370)
14,48 (.570)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
7,67 (.302)5,94 (.234)
0,86 (.034)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,40 (.370)
7,77 (.306)
14,48 (.570)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
4,14
(.163)
47,04 (1.852)
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
9,40 (.370)
7,77 (.306)
14,48 (.570)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
4,14
(.163)
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84
(.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
2,54 (.100)
2,54 (.100)
Coax
Contact
9,40 (.370)
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 2,84
(.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
2,54 (.100)
2,54 (.100)
9,40 (.370) Coax
Contact
47,04 (1.852)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard Coaxial 90°— Receptacle
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
63,50 (2.500)
9,40 (.370)
3,81 (.150)
10,16 (.400)
2,54 (.100)
2,54 (.100)
22,86 (.900)
15,24 (.600)16,51(.650)
Coax
Contact
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37 (.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
24,84 (.978)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
63,50 (2.500)
2,54 (.100)
2,54 (.100)
22,56 (.888)
15,82 (.623)
Coax
Contact
9,09 (.358)
2,36 (.093)
9,40 (.370)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112) 2,54 (.100)
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
7,19 (.283)
9,40 (.370)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
15,70 (.618)15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
7,19 (.283) 9,40 (.370)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
15,70 (.618) 15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112) 2,54 (.100)
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
7,19 (.283)
9,40 (.370)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
15,70 (.618)
17,96 (.707)
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
R e a d e r ’ s R e s o u r c e
232
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard Coaxial 90°— Receptacle
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
2,84 (.112)
61,12 (2.406)
5,54(.218) 5,54(.218)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
2,54 (.100)
2,54 (.100)
9,40 (.370)
10,06 (.396)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
13,72 (.540)
20,57 (.810)
6,86 (.270)
2,84 (.112)
5,54(.218)
4,14 (.163)
20,57 (.810)
Mounting Hole
Signal
Contact
Coax
Contact
2,84 (.112)
61,12 (2.406)
5,54(.218)
5,54(.218)
2,84 (.112)
11.53 (.454)
2,84 (.112)
61,12 (2.406)
5,54(.218) 5,54(.218)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,54 (.100)
2,54 (.100)
9,40 (.370) 10,06 (.396)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting Hole
Signal Contact
Coax
Contact
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
233
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European Coaxial 90°— Plug
REAR FLANGE REF
10,90 (.429)
2,54
(.100)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
Coax
Contact
Mounting
Hole
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
33,32 (1.312)
2,54
(.100)
2,54
(.100)
Coax
Contact
Mounting
Hole
Signal
Contact
2,54
(.100)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
6,86 (.270) 6,86 (.270)
2,74 (.108)
5,49(.216)
33,32 (1.312)
Coax
Contact
Mounting
Hole
Signal
Contact 2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
8,23 (.324)
9,60 (.378)
6,86
(.270)
6,86
(.270)
9,60 (.378)
5,49
(.216) 5,49
(.216)
8,23 (.324) 8,23 (.324)
33,32 (1.312)
Coax Contact
2,54(.100)
Mounting
Hole
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
14,48 (.570)
Coax
Contact
14,48 (.570)
7,67 (.302) 5,94 (.234)
0,86 (.034)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
Signal
Contact
7,77 (.306)
14,48 (.570)
Coax
Contact
14,48 (.570)
4,14 (.163)
47,04 (1.852)
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting
Hole
2,80 (.110)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
Signal
Contact
7,77 (.306)
14,48 (.570)
Coax
Contact
14,48 (.570)
4,14 (.163)
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
Coax
Contact
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Coax
Contact
2,54(.100)
47,04 (1.852)
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
234
Dimensions are shown in mm (inch)
Dimensions subject to change
Mounting
Hole
63,50 (2.500)
REAR FLANGE REF
9,40 (.370)
10,90 (.429)
3,81 (.150)
10,16 (.400)
2,54 (.100)
2,54 (.100)
22,86 (.900)
15,24 (.600) 16,51(.650)
Coax
Contact
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
63,50 (2.500)
24,84 (.978)
2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
4,37(.172)
11,10 (.437)
2,54 (.100)
2,54 (.100)
22,56 (.888)
15,82 (.623)
Coax
Contact
9,09 (.358)
2,36(.093)
9,40 (.370)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
15,70 (.618) 15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
15,70 (.618) 15,70 (.618)
5,54(.218)5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
15,70 (.618)
17,96 (.707)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
PCB Hole Pattern — European Coaxial 90°— Plug
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
R e a d e r ’ s R e s o u r c e
235
Dimensions are shown in mm (inch)
Dimensions subject to change
REAR FLANGE REF
10,90 (.429)
2,54
(.100)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
Coax
Contact
Mounting
Hole
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
33,32 (1.312)
2,54
(.100)
2,54
(.100)
Coax
Contact
Mounting
Hole
Signal
Contact 2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
8,23 (.324)
9,60 (.378)
6,86
(.270)
6,86
(.270)
9,60 (.378)
5,49
(.216) 5,49
(.216)
8,23 (.324) 8,23 (.324)
33,32 (1.312)
Coax Contact
2,54(.100)
Mounting
Hole
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
14,48 (.570)
Coax
Contact
14,48 (.570)
7,67 (.302)5,94 (.234)
0,86 (.034)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
Signal
Contact
7,77 (.306)
14,48 (.570)
Coax
Contact
14,48 (.570)
4,14 (.163)
47,04 (1.852)
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting
Hole
2,80 (.110)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
Signal
Contact
7,77 (.306)
14,48 (.570)
Coax
Contact
14,48 (.570)
4,14 (.163)
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,54 (.100)
Coax
Contact
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Coax
Contact
2,54(.100)
47,04 (1.852)
PCB Hole Pattern — European Coaxial 90°— Receptacle
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Mounting
Hole
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
6,86 (.270) 6,86 (.270)
2,74 (.108)
5,49
(.216)
33,32 (1.312)
High Power
Contact
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
236
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European Coaxial 90°— Receptacle
Mounting
Hole
63,50 (2.500)
REAR FLANGE REF
9,40 (.370) 10,90 (.429)
3,81 (.150)
10,16 (.400)
2,54 (.100)
2,54 (.100)
22,86 (.900)
15,24 (.600)16,51(.650)
Coax
Contact
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
63,50 (2.500)
24,84 (.978)
2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
4,37(.172)
11,10 (.437)
2,54 (.100)
2,54 (.100)
22,56 (.888)
15,82 (.623)
Coax
Contact
9,09 (.358)
2,36(.093)
9,40 (.370)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
15,70 (.618) 15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
15,70 (.618) 15,70 (.618)
5,54(.218)5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
15,70 (.618)
17,96 (.707)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
2,54 (.100)
22,68 (.893)
Coax
Contact
22,68 (.893)
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
R e a d e r ’ s R e s o u r c e
237
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Coaxial Straight — Plug
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
2,84
(.112)
Coax Contact
2,54 (.100)
2,54 (.100)
6,86
(.270) 6,86
(.270)
Mounting
Hole
2,54
(.100)
2,54
(.100)
Coax
Contact
33,32(1.312)
5,49
(.216)
33,32 (1.312)
Mounting
Hole Signal
Contact
2,74 (.108)
2,84
(.112)
2,54
(.100)
2,54
(.100)
Coax
Contact
6,86
(.270) 6,86
(.270)
5,49
(.216) 5,49
(.216)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
8,23 (.324)
6,86
(.270)
9,60 (.378)
6,86
(.270)
9,60 (.378)
Mounting
Hole Signal
Contact
2,84 (.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
Coax Contact
14,48 (.570)
Mounting Hole
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
7,67 (.302) 5,94 (.234)
0,86
(.034)
47,04 (1.852)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,84 (.112)
2,54 (.100)
2,54 (.100)
Coax
Contact
4,14 (.163)
14,48 (.570)
47,04 (1.852)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Coax
Contact
4,14 (.163)
14,48 (.570)
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact 2,80 (.110)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Coax
Contact
47,04(1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact 2,84
(.112)
2,54 (.100)
2,54 (.100)
Coax Contact
47,01(1.852)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
238
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Coaxial Straight — Plug
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
3,81 (.150)
10,16 (.400)
Mounting
Hole
63,50 (2.500)
2,54 (.100)
2,54 (.100)
22,86 (.900)
15,24 (.600) 16,51(.650)
Coax
Contact
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37 (.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting
Hole Signal
Contact
24,84 (.978)
63,50(2.500)
2,54 (.100)
2,54 (.100)
22,56 (.888)
15,82 (.623)
Coax
Contact
9,09 (.358)
2,36 (.093)
2,84
(.112)
5,54(.218)
11,05 (.435)
8,28 (.326)
8,71 (.343)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63.50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
15,70 (.618)
Coax
Contact
22,68 (.893)
15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
15,70 (.618)
Coax
Contact
22,68 (.893)
15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
15,70 (.618)
Coax
Contact
22,68 (.893)
17,96 (.707)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
239
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Coaxial Straight — Plug
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
20,57 (.810)
2,54 (.100)
2,54 (.100)
3,96 (.156)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
13,72 (.540)
6,86 (.270)
4,14 (.163)
20,57 (.810)
Mounting Hole
Signal Contact
Coax
Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,54 (.100)
2,54 (.100) 3,96 (.156)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Coax
Contact
Signal Contact
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
240
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Coaxial Straight — Receptacle
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
2,84
(.112)
Coax Contact
2,54 (.100)
2,54 (.100)
6,86
(.270) 6,86
(.270)
Mounting
Hole
2,54
(.100)
2,54
(.100)
Coax
Contact
33,32(1.312)
5,49
(.216)
33,32 (1.312)
Mounting
Hole Signal
Contact
2,74 (.108)
2,84
(.112)
2,54
(.100)
2,54
(.100)
Coax
Contact
6,86
(.270) 6,86
(.270)
5,49
(.216) 5,49
(.216)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
8,23 (.324)
6,86
(.270)
9,60 (.378)
6,86
(.270)
9,60 (.378)
Mounting
Hole Signal
Contact
2,84 (.112)
2,54 (.100)
2,54 (.100)
2,54 (.100)
Coax Contact
14,48 (.570)
Mounting Hole
47,04 (1.852)
2,54 (.100)
2,54 (.100)
Coax
Contact
14,48 (.570)
7,67 (.302)
5,94 (.234) 0,86
(.034)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,84 (.112) 2,54 (.100)
2,54 (.100)
Coax
Contact 4,14 (.163)
14,48 (.570)
47,04 (1.852)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
2,84 (.112) 2,54 (.100)
2,54 (.100)
Coax
Contact 4,14 (.163)
14,48 (.570)
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact 2,80 (.110)
2,84 (.112)
2,54 (.100)
2,54 (.100)
Coax
Contact
47,04(1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact 2,84
(.112)
2,54 (.100)
2,54 (.100)
Coax Contact
47,01(1.852)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
241
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Coaxial Straight — Receptacle
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
3,81 (.150)
10,16 (.400)
Mounting
Hole
63,50 (2.500)
2,54 (.100)
2,54 (.100)
22,86 (.900)
15,24 (.600)
16,51(.650)
Coax
Contact
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37 (.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
24,84 (.978)
63,50 (2.500)
2,54 (.100)
2,54 (.100)
22,56 (.888)
15,82 (.623)
Coax
Contact
9,09 (.358)
2,36 (.093)
2,84
(.112)
5,54(.218)
11,05 (.435)
8,28 (.326)
8,71 (.343)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63.50 (2.500)
2,84 (.112) 2,54 (.100)
2,54 (.100)
22,68 (.893)
15,70 (.618)
Coax
Contact
22,68 (.893)
15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
2,54 (.100)
2,54 (.100)
22,68 (.893)
15,70 (.618)
Coax
Contact
22,68 (.893)
15,70 (.618)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
242
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Coaxial Straight — Receptacle
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
20,57 (.810)
2,54 (.100)
2,54 (.100) 3,96 (.156)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381) 13,72 (.540)
6,86 (.270)
4,14 (.163)
20,57 (.810)
Mounting Hole
Signal Contact
Coax
Contact
2,84 (.112)
5,54(.218) 5,54(.218)
61,12(2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
6,91 (.272)
9,68 (.381)
2,54 (.100)
2,54 (.100)
3,96 (.156)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
13,72 (.540)
Mounting Hole Signal Contact
Coax
Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,54 (.100)
2,54 (.100)
3,96 (.156)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Coax
Contact
Signal Contact
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
Coaxial (C or X) 1,14 (.045)
R e a d e r ’ s R e s o u r c e
243
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard High Power 90°— Plug
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23
(.324)
Mounting
Hole
25,00 (.984)
Signal
Contact 2,84
(.112)
20,57
(.810)
High Power
Contact
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
33,32 (1.312)
High Power
Contact 20,57
(.810) Mounting
Hole
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
Signal
Contact
2,84 (.112)
5,49
(.216)
2,74 (.108)
33,32 (1.312)
High Power
Contact
20,57
(.810)
11,53 (.454)
Mounting
Hole Signal
Contact
2,84
(.112)
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23(.324) 8,23(.324)
8,23 (.324)
6,86
(.270) 6,86
(.270)
9,60 (.378) 9,60 (.378)
33,32 (1.312)
20,57
(.810)
11,53 (.454)
High Power
Contact
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
High Power
Contact
20,57 (.810)
14,48 (.570)14,48 (.570)
7,67 (.302) 5,94(.234)
0,86 (.034)
47,04 (1.852)
Mounting Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,84
(.112)
High Power
Contact
20,57 (.810)
11,53 (.454)
7,77 (.306)
47,04 (1.852)
14,48 (.570)
4,14
(.163)
14,48 (.570)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
2,84
(.112)
High Power
Contact
20,57 (.810)
11,53 (.454)
7,77 (.306) 14,48 (.570)
14,48 (.570)
4,14
(.163)
47,04 (1.852)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
2,84
(.112)
REAR FLANGE REF
11,53 (.454)
REAR FLANGE REF
8,64 (.340)
High Power
Contact
20,57
(.810)
47,04 (1.852)
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
R e a d e r ’ s R e s o u r c e
244
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard High Power 90°— Plug
63,50 (2.500)
Mounting Hole
REAR FLANGE REF
8,64 (.340)
High Power
Contact
20,57 (.810)
3,81
(.150)
10,16 (.400)
22,86 (.900)
15,24 (.600) 16,51(.650)
8,89 (.350)
2,54
(.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37
(.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting Hole
Signal
Contact
24,84 (.978)
2,84
(.112)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
63,50 (2.500)
22,56 (.888)
15,82 (.623)
9,09 (.358)
2,36
(.093)
High Power
Contact
11,53 (.454)
20,57 (.810)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
22,68 (.893) 22,68 (.893)
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
20,57 (.810)
High Power
Contact
15,70 (.618) 15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381) 6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
22,68 (.893) 22,68 (.893)
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
20,57 (.810)
High Power
Contact
15,70 (.618) 15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
22,68 (.893) 22,68 (.893)
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
20,57 (.810)
High Power
Contact
15,70 (.618)
17,96 (.707)
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
R e a d e r ’ s R e s o u r c e
245
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard High Power 90°— Plug
5,54(.218)5,54(.218)
61,12 (2.406)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
20,57 (.810)
20,57 (.810)
10,06 (.396)
REAR FLANGE REF
13,72 (.540)
6,86 (.270)
20,57 (.810)
13,72 (.540)
6,86 (.270)
Mounting
Hole
High
Power
Contact
Signal Contact
2,84 (.112)
5.54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
6,91 (.272)
9,68 (.381)
20,57 (.810) 10,06 (.396)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
13,72 (.540)
Mounting
Hole
High Power
Contact
Signal Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
20,57 (.810) 10,06 (.396)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting
Hole
High Power
Contact
Signal
Contact
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,84 (.112)
20,57 (.810)
20,57 (.810)
10,06
(.396)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
13,72 (.540)
6,86 (.270)
4,14 (.163)
20,57 (.810)
Mounting
Hole
High
Power
Contact
Signal
Contact
R e a d e r ’ s R e s o u r c e
246
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard High Power 90°— Receptacle
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23
(.324)
Mounting
Hole
25,00 (.984)
Signal
Contact 2,84
(.112)
20,57
(.810)
High Power
Contact
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
33,32 (1.312)
High Power
Contact 20,57
(.810) Mounting
Hole
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
6,86
(.270) 6,86
(.270)
Signal
Contact
2,84 (.112)
5,49
(.216)
2,74 (.108)
33,32 (1.312)
High Power
Contact
20,57
(.810)
11,53 (.454)
Mounting
Hole Signal
Contact
2,84
(.112)
REAR FLANGE REF
8,64
(.340)
REAR FLANGE REF
5,49
(.216) 5,49
(.216)
8,23(.324) 8,23(.324)
8,23 (.324)
6,86
(.270) 6,86
(.270)
9,60 (.378) 9,60 (.378)
33,32 (1.312)
20,57
(.810)
11,53 (.454)
High Power
Contact Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
High Power
Contact
20,57 (.810)
14,48 (.570) 14,48 (.570)
7,67 (.302)5,94 (.234)
0,86 (.034)
47,04 (1.852)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,84
(.112) High Power
Contact
20,57 (.810)
11,53 (.454)
7,77 (.306)
14,48 (.570)
14,48 (.570)
47,04 (1.852)
4,14
(.163)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
2,84
(.112) High Power
Contact
20,57 (.810)
11,53 (.454)
7,77 (.306)
14,48 (.570) 14,48 (.570)
4,14
(.163)
47,04 (1.852)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
2,84
(.112)
REAR FLANGE REF
11,53 (.454)
REAR FLANGE REF
8,64 (.340)
High Power
Contact
20,57
(.810)
47,04 (1.852)
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
R e a d e r ’ s R e s o u r c e
247
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard High Power 90°— Receptacle
63,50 (2.500)
Mounting Hole
REAR FLANGE REF
8,64 (.340)
High Power
Contact
20,57 (.810)
3,81
(.150)
10,16 (.400)
22,86 (.900)
15,24 (.600)
16,51(.650)
8,89 (.350)
2,54
(.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37
(.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting Hole
Signal
Contact
24,84 (.978)
2,84
(.112)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
63,50 (2.500)
22,56 (.888)
15,82 (.623)
9,09 (.358)
2,36
(.093)
High Power
Contact
11,53 (.454)
20,57 (.810)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
22,68 (.893)
22,68 (.893)
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
20,57 (.810)
High Power
Contact
15,70 (.618)15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381) 6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
22,68 (.893) 22,68 (.893)
11,53 (.454)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
20,57 (.810)
High Power
Contact
15,70 (.618) 15,70 (.618)
5,54(.218)5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
22,68 (.893)
22,68 (.893)
11,53(.454)
Mounting
Hole
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
20,57 (.810)
High Power
Contact
15,70 (.618)
17,96 (.707)
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
R e a d e r ’ s R e s o u r c e
248
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard High Power 90°— Receptacle
5,54(.218)5,54(.218)
61,12 (2.406)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
20,57 (.810)
20,57 (.810)
10,06 (.396)
REAR FLANGE REF
13,72 (.540)
6,86 (.270)
20,57 (.810)
13,72 (.540)
6,86 (.270)
Mounting
Hole
High
Power
Contact
Signal Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,84 (.112)
20,57 (.810)
20,57 (.810) 10,06 (.396)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
13,72 (.540)
6,86 (.270)
4,14
(.163)
20,57 (.810)
Mounting
Hole
High Power
Contact
Signal
Contact
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
6,91 (.272)
9,68 (.381)
20,57 (.810)
10,06 (.396)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
13,72 (.540)
Mounting
Hole
High Power
Contact
Signal Contact
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
11,53 (.454)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
20,57 (.810)
10,06 (.396)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting
Hole
High Power
Contact
Signal
Contact
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
R e a d e r ’ s R e s o u r c e
249
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European High Power 90°— Plug
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
REAR FLANGE
REF
10,90
(.429)
2,54
(.100)
9,40 (.370)
REAR FLANGE
REF
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
High Power
Contact
Mounting
Hole
11,94 (.470)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
6,86 (.270) 6,86 (.270)
33,32 (1.312)
High Power
Contact Mounting
Hole
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
6,86 (.270) 6,86 (.270)
2,74 (.108)
5,49
(.216)
33,32 (1.312)
High Power
Contact
Mounting
Hole
Signal
Contact 2,54
(.100)
9,40 (.370)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
8,23 (.324)
6,86 (.270)
9,60 (.378) 6,86 (.270)
9,60 (.378)
5,49
(.216) 5,49
(.216)
8,23 (.324) 8,23 (.324)
33,32 (1.312)
High Power
Contact
Mounting
Hole
10,90 (.429)
REAR FLANGE REF
REAR FLANGE REF
14,48 (.570)
14,48 (.570)
11,94 (.470)
High Power
Contact
7,67 (.302) 5,94 (.234)
0,86 (.034)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
9,40 (.370)
10,90 (.429)
REAR FLANGE REF
REAR FLANGE REF
7,77 (.306)
14,48 (.570)
14,48 (.570)
4,14 (.163) 11,94 (.470)
High Power
Contact
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
9,40 (.370)
10,90 (.429)
REAR FLANGE REF
REAR FLANGE REF
7,77 (.306)
14,48 (.570)
14,48 (.570)
5,54(.218)
4,14 (.163)
2,80 (.110)
11,94 (.470)
High Power
Contact
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
11,94 (.470)
High Power
Contact
47,04 (1,852)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Mounting
Hole
High Power
Contact
8,28 (.326)
47,04 (1.853)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (P) 3,28 (.129)
R e a d e r ’ s R e s o u r c e
250
Dimensions are shown in mm (inch)
Dimensions subject to change
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
15,70 (.618)
17,96 (.707)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
PCB Hole Pattern — European High Power 90°— Plug
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Mounting Hole
63,50 (2.500)
REAR FLANGE REF
10,90 (.429) 11,94 (.470)
High Power
Contact 3,81 (.150)
10,16 (.400)
22,86 (.900)
15,24 (.600) 16,51(.650)
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
63,50 (2.500)
24,84 (.978)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
4,37 (.172)
11,10 (.437)
22,56 (.888)
15,82 (.623)
9,09 (.358)
2,36 (.093)
High Power
Contact
11,94 (.470)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
15,70 (.618) 15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
15,70 (.618) 15,70 (.618)
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (P) 3,28 (.129)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
R e a d e r ’ s R e s o u r c e
251
Dimensions are shown in mm (inch)
Dimensions subject to change
REAR FLANGE
REF
10,90
(.429)
2,54
(.100)
9,40 (.370)
REAR FLANGE
REF
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
High Power
Contact
Mounting
Hole
11,94 (.470)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
6,86 (.270) 6,86 (.270)
33,32 (1.312)
High Power
Contact
Mounting
Hole
Signal
Contact 2,54
(.100)
9,40 (.370)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
8,23 (.324)
6,86 (.270)
9,60 (.378) 6,86 (.270)
9,60 (.378)
5,49
(.216) 5,49
(.216)
8,23 (.324) 8,23 (.324)
33,32 (1.312)
High Power
Contact
Mounting
Hole
10,90 (.429)
REAR FLANGE REF REAR FLANGE REF
14,48 (.570)
14,48 (.570)
11,94 (.470)
High Power
Contact
7,67 (.302)5,94 (.234)
0,86 (.034)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 9,40 (.370)
10,90 (.429)
REAR FLANGE REF REAR FLANGE REF
7,77 (.306)
14,48 (.570) 14,48 (.570)
4,14 (.163)
11,94 (.470)
High Power
Contact
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 9,40 (.370)
10,90 (.429)
REAR FLANGE REF REAR FLANGE REF
7,77 (.306)
14,48 (.570) 14,48 (.570)
5,54(.218)
4,14 (.163)
2,80 (.110)
11,94 (.470)
High Power
Contact
47,04 (1.852)
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
11,94 (.470)
High Power
Contact
47,04 (1,852)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
Mounting
Hole
High Power
Contact
8,28 (.326)
47,04 (1.853)
PCB Hole Pattern — European High Power 90°— Receptacle
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Mounting
Hole
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE
REF
10,90
(.429)
REAR FLANGE
REF
6,86 (.270) 6,86 (.270)
2,74 (.108)
5,49
(.216)
33,32 (1.312)
High Power
Contact
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (P) 3,28 (.129)
R e a d e r ’ s R e s o u r c e
252
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European High Power 90°— Receptacle
Mounting Hole
63,50 (2.500)
REAR FLANGE REF
10,90 (.429)
11,94 (.470)
High Power
Contact
3,81 (.150)
10,16 (.400)
22,86 (.900)
15,24 (.600)
16,51(.650)
8,89 (.350)
2,54 (.100)
22,86 (.900)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
63,50 (2.500)
24,84 (.978)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
4,37 (.172)
11,10 (.437)
22,56 (.888)
15,82 (.623)
9,09 (.358)
2,36 (.093) High Power
Contact
11,94 (.470)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
15,70 (.618) 15,70 (.618)
8,71 (.343)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
15,70 (.618) 15,70 (.618)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
15,70 (.618)
17,96 (.707)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
22,68 (.893) 22,68 (.893)
11,94 (.470)
High Power
Contact
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (P) 3,28 (.129)
R e a d e r ’ s R e s o u r c e
253
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European High Power/Voltage Straight — Plug
5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
2,84 (.112)
High Voltage
High Power/
Contact
5,49
(.216)
33,32 (1.312)
6,86
(.270)
Mounting
Hole
High Voltage
Contact
High Power/
6,86
(.270)
33,32 (1.312)
5,49
(.216)
6,86
(.270)
Mounting
Hole Signal
Contact
2,74 (.108) 2,84 (.112)
6,86
(.270)
High Voltage
Contact
High Power/
5,49
(.216) 5,49
(.216)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
8,23 (.324)
6,86 (.270)
9,60 (.378)
6,86 (.270)
9,60 (.378)
Mounting
Hole Signal
Contact
2,84
(.112)
High Voltage
Contact
High Power/
14,48 (.570)
Mounting
Hole
14,48 (.570)
7,67 (.302) 5,94 (.234)
0,86
(.034)
47,04 (1.852)
High Voltage
Contact
High Power/
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole Signal
Contact
2,84 (.112)
4,14 (.163)
14,48 (.570)
47,04 (1.852)
High Voltage
Contact
High Power/
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84 (.112)
4,14 (.163)
14,48 (.570)
47,04 (1.852)
High Voltage
Contact
High Power/
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
2,84 (.112)
47,04 (1.852)
High Voltage
Contact
High Power/ 5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact 2,84 (.112)
47,04 (1.852)
High Voltage
Contact
High Power/
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
High Voltage (V) 1,96 (.077)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
R e a d e r ’ s R e s o u r c e
254
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European High Power/Voltage Straight — Plug
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
3,81 (.150)
10,16 (.400)
Mounting
Hole
63,50 (2.500)
22,86 (.900)
15,24 (.600) 16,51(.650)
8,89 (.350)
2,54 (.100)
22,86 (.900)
High Voltage
Contact
High Power/
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37 (.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting
Hole Signal
Contact
24,84 (.978)
63.50 (2.500)
22,56 (.888)
15,82 (.623)
9,09 (.358)
2,36 (.093) 2,84
(.112)
High Voltage
Contact
High Power/
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
22,68 (.893) 22,68 (.893)
15,70 (.618) 15,70 (.618)
2,84
(.112)
8,71 (.343)
High Voltage
Contact
High Power/ 5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84
(.112)
22,68 (.893) 22,68 (.893)
15,70 (.618) 15,70 (.618)
High Voltage
Contact
High Power/
5,54(.218)5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84
(.112)
22,68 (.893)
22,68 (.893)
15,70 (.618)
17,96 (.707)
High Voltage
Contact
High Power/ 5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84
(.112)
22,68 (.893) 22,68 (.893)
High Voltage
Contact
High Power/
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
High Voltage (V) 1,96 (.077)
R e a d e r ’ s R e s o u r c e
255
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European High Power/Voltage Straight — Plug
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
20,57 (.810)
1,42 (.056)
13,72 (.540)
6,86 (.270)
20,57 (.810)
13,72 (.540)
6,86 (.270)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
1,42 (.056)
13,72 (.540)
6,86 (.270)
4,14 (.163)
20,57 (.810)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
6,91 (.272)
9,68 (.381)
1,42 (.056)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
13,72 (.540)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
1,42 (.056)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
High Voltage (V) 1,96 (.077)
R e a d e r ’ s R e s o u r c e
256
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European High Power/Voltage Straight — Receptacle
5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
2,84 (.112)
High Voltage
High Power/
Contact
5,49
(.216)
33,32 (1.312)
6,86
(.270)
Mounting
Hole
High Voltage
Contact
High Power/
6,86
(.270)
33,32 (1.312)
5,49
(.216)
6,86
(.270)
Mounting
Hole Signal
Contact
2,74 (.108) 2,84 (.112)
6,86
(.270)
High Voltage
Contact
High Power/
5,49
(.216) 5,49
(.216)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
8,23 (.324)
6,86 (.270)
9,60 (.378)
6,86 (.270)
9,60 (.378)
Mounting
Hole Signal
Contact
2,84
(.112)
High Voltage
Contact
High Power/
5,54(.218) 5,54(.218)
13,82 (.544)
8,28 (.326)
13,82 (.544)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
2,84 (.112)
47,04 (1.852)
High Voltage
Contact
High Power/ 5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact 2,84 (.112)
47,04 (1.852)
High Voltage
Contact
High Power/
E
5W1
4 #20
1#8
A
3W3
0 #20
3 #8
A
7W2
5 #20
2 #8
A
11W1
10 #20
1#8
B
5W5
0 #20
5 #8
B
9W4
5 #20
4 #8
B
13W3
10 #20
3 #8
B
17W2
15 #20
2 #8
B
21W1
20 #20
1#8
14,48 (.570)
Mounting
Hole
14,48 (.570)
7,67 (.302) 5,94 (.234)
0,86
(.034)
47,04 (1.852)
High Voltage
Contact
High Power/
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
High Voltage (V) 1,96 (.077)
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84
(.112)
4,14 (.163)
14,48 (.570)
47,04 (1.852)
High Voltage
Contact
High Power/
5,54(.218)
7,77 (.306)
14,48 (.570)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,84 (.112)
4,14 (.163)
14,48 (.570)
47,04 (1.852)
High Voltage
Contact
High Power/
R e a d e r ’ s R e s o u r c e
257
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European High Power/Voltage Straight — Receptacle
C
8W8
0 #20
8 #8
C
13W6
7 #20
6 #8
C
17W5
12 #20
5 #8
C
21WA4
17 #20
4 #8
C
25W3
22 #20
3 #8
C
27W2
25 #20
2 #8
3,81 (.150)
10,16 (.400)
Mounting
Hole
63,50 (2.500)
22,86 (.900)
15,24 (.600)16,51(.650)
8,89 (.350)
2,54 (.100)
22,86 (.900)
High Voltage
Contact
High Power/
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
4,37 (.172)
11,10 (.437)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
24,84 (.978)
63.50 (2.500)
22,56 (.888)
15,82 (.623)
9,09 (.358)
2,36 (.093)
2,84
(.112)
High Voltage
Contact
High Power/
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
22,68 (.893) 22,68 (.893)
15,70 (.618) 15,70 (.618)
2,84
(.112)
8,71 (.343)
High Voltage
Contact
High Power/ 5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84
(.112)
22,68 (.893) 22,68 (.893)
15,70 (.618) 15,70 (.618)
High Voltage
Contact
High Power/
5,54(.218)5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84
(.112)
22,68 (.893)
22,68 (.893)
15,70 (.618)
17,96 (.707)
High Voltage
Contact
High Power/ 5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84
(.112)
22,68 (.893) 22,68 (.893)
High Voltage
Contact
High Power/
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
High Voltage (V) 1,96 (.077)
R e a d e r ’ s R e s o u r c e
258
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European High Power/Voltage Straight — Receptacle
D
24W7
17 #20
7 #8
D
36W4
32 #20
4 #8
D
43W2
41 #20
2 #8
D
47W1
46 #20
1#8
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
20,57 (.810)
1,42 (.056)
13,72 (.540)
6,86 (.270)
20,57 (.810)
13,72 (.540)
6,86 (.270)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
1,42 (.056)
13,72 (.540)
6,86 (.270)
4,14 (.163)
20,57 (.810)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
6,91 (.272)
9,68 (.381)
1,42 (.056)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
13,72 (.540)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
2,84 (.112)
30,56 (1.203)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
20,57 (.810)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
1,42 (.056)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal Contact
High Voltage
Contact
High Power/
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Size 8 Contact Type Recommended PCB Hole X
High Power (H) 3,56 (.140)
High Voltage (V) 1,96 (.077)
R e a d e r ’ s R e s o u r c e
259
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European 90°PC Tails — Plug
REAR FLANGE REF
10,90 (.429)
2,54(.100)
9,40 (.370)
REAR FLANGE REF
5,49(.216) 5,49(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
Mounting
Hole
Signal
Contact 2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
8,23 (.324)
6,86 (.270)
9,60 (.378)
6,86 (.270)
9,60 (.378)
5,49(.216) 5,49(.216)
8,23 (.324) 8,23 (.324)
33,32 (1.312)
5,54(.218) 5,54(.218)
8,28 (.326) 8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
47,04 (1.852)
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
B
17W2
15 #20
0 #8
B
21W1
20 #20
0 #8
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
47,04 (1.852)
Mounting
Hole
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,74 (.108)
5,49(.216)
33,32 (1.312)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
9,40 (.370)
10,90 (.429)
REAR FLANGE REF
4,14 (.163)
2,54 (.100)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
9,40 (.370)
10,90 (.429)
REAR FLANGE REF
5,54(.218)
4,14 (.163)
2,80 (.110)
2,54 (.100)
47,04 (1.852)
R e a d e r ’ s R e s o u r c e
260
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European 90°PC Tails — Plug
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
63,50 (2.500)
24,84 (.978)
2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
C
13W6
7 #20
0 #8
C
17W5
12 #20
0 #8
C
21WA4
17 #20
0 #8
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
R e a d e r ’ s R e s o u r c e
261
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European 90°PC Tails — Plug
5,54(.218)5,54(.218)
9,40 (.370)
2,54 (.100)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,54 (.100)
9,40 (.370)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,84 (.112)
12,27
(.483)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
4,14 (.163)
Mounting
Hole
Signal Contact
2,54 (.100)
5,54(.218)5,54(.218)
61,12 (2.406)
2,54 (.100)
9,40 (.370)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,27 (.483)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting
Hole
Signal Contact
2,54 (.100)
5,54(.218)5,54(.218)
61,12 (2.406)
2,54 (.100)
9,40 (.370)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,27 (.483)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting Hole
Signal Contact
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
D
43W2
41 #20
0 #8
D
47W1
46 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
262
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European 90°PC Tails — Receptacle
REAR FLANGE REF
10,90 (.429)
2,54(.100)
9,40 (.370)
REAR FLANGE REF
5,49(.216) 5,49(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
Mounting
Hole
Signal
Contact
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
2,74 (.108)
5,49(.216)
33,32 (1.312)
Mounting
Hole
Signal
Contact 2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
8,23 (.324)
6,86 (.270)
9,60 (.378)
6,86 (.270)
9,60 (.378)
5,49(.216) 5,49(.216)
8,23 (.324) 8,23 (.324)
33,32 (1.312)
5,54(.218) 5,54(.218)
8,28 (.326) 8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,54
(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 9,40 (.370)
10,90 (.429)
REAR FLANGE REF
5,54(.218)
4,14 (.163)
2,80 (.110)
2,54 (.100)
47,04 (1.852)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact 9,40 (.370) 10,90 (.429)
REAR FLANGE REF
4,14 (.163)
2,54 (.100)
47,04 (1.852)
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
B
17W2
15 #20
0 #8
B
21W1
20 #20
0 #8
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
R e a d e r ’ s R e s o u r c e
263
Dimensions are shown in mm (inch)
Dimensions subject to change
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
63,50 (2.500)
24,84 (.978)
2,54(.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
17,96 (.707)
PCB Hole Pattern — European 90°PC Tails — Receptacle
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
C
13W6
7 #20
0 #8
C
17W5
12 #20
0 #8
C
21WA4
17 #20
0 #8
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
2,80 (.110)
63,50 (2.500)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
Mounting
Hole
Signal
Contact
R e a d e r ’ s R e s o u r c e
264
Dimensions are shown in mm (inch)
Dimensions subject to change
2,54 (.100)
5,54(.218)5,54(.218)
61,12 (2.406)
2,54 (.100)
9,40 (.370)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,27 (.483)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting
Hole
Signal Contact
2,54 (.100)
5,54(.218)5,54(.218)
61,12 (2.406)
2,54 (.100)
9,40 (.370)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,80 (.110)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,27 (.483)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
Mounting
Hole Signal Contact
2,54 (.100)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,54 (.100)
9,40 (.370)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
REAR FLANGE REF
5,54(.218)
2,84 (.112)
12,27 (.483)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
REAR FLANGE REF
4,14 (.163) Mounting
Hole
Signal Contact
5,54(.218)5,54(.218)
9,40 (.370)
PCB Hole Pattern — European 90°PC Tails — Receptacle
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
D
43W2
41 #20
0 #8
D
47W1
46 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
265
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Straight PC Tails — Plug
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
2,84
(.112)
33,32 (1.312)
5,49(.216)
Mounting
Hole
Signal
Contact
2,74 (.108) 2,84
(.112)
5,49
(.216) 5,49
(.216)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
8,23 (.324)
9,60 (.378)
6,86
(.270) 6,86
(.270)
9,60 (.378)
Mounting
Hole
Signal
Contact
2,84
(.112)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,84 (.112)
4,14 (.163)
47,04 (1.852)
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal Contact 2,80 (.110)
2,84 (.112)
4,14 (.163)
47,04 (1.852)
5,54(.218) 5,54(.218)
8,28 (.326) 8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
2,84 (.112)
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact 2,84
(.112)
47,04 (1.852)
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
B
17W2
15 #20
0 #8
B
21W1
20 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
266
Dimensions are shown in mm (inch)
Dimensions subject to change
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
24,84 (.978)
63,50 (2.500)
2,84
(.112)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact 2,80 (.110)
63,50 (2.500)
2,84 (.112)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
17,96 (.707)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
PCB Hole Pattern — Standard/European Straight PC Tails — Plug
C
13W6
7 #20
0 #8
C
17W5
12 #20
0 #8
C
21WA4
17 #20
0 #8
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
267
Dimensions are shown in mm (inch)
Dimensions subject to change
5,54(.218)5,54(.218)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
Mounting
Hole
Signal Contact
61,12 (2.406)
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
4,14 (.163)
Mounting
Hole
Signal Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal Contact
PCB Hole Pattern — Standard/European Straight PC Tails — Plug
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
D
43W2
41 #20
0 #8
D
47W1
46 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
268
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Straight PC Tails — Receptacle
5,49
(.216) 5,49
(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
25,00 (.984)
2,84
(.112)
33,32 (1.312)
5,49(.216)
Mounting
Hole
Signal
Contact
2,74 (.108) 2,84
(.112)
5,49
(.216) 5,49
(.216)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
8,23 (.324)
9,60 (.378)
6,86
(.270) 6,86
(.270)
9,60 (.378)
Mounting
Hole
Signal
Contact
2,84
(.112)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,84 (.112)
4,14 (.163)
47,04 (1.852)
5,54(.218)
8,28 (.326)
5,54(.218)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal Contact
2,80 (.110)
2,84 (.112)
4,14 (.163)
47,04 (1.852)
5,54(.218) 5,54(.218)
8,28 (.326) 8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
2,84 (.112)
47,04 (1.852)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact 2,84
(.112)
47,04 (1.852)
E
5W1
4 #20
0 #8
A
7W2
5 #20
0 #8
A
11W1
10 #20
0 #8
B
9W4
5 #20
0 #8
B
13W3
10 #20
0 #8
B
17W2
15 #20
0 #8
B
21W1
20 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
269
Dimensions are shown in mm (inch)
Dimensions subject to change
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
17,96 (.707)
20.70 (.815)
Mounting
Hole
Signal
Contact
24,84 (.978)
63,50 (2.500)
2,84
(.112)
5,54(.218)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
6,91 (.272)
9,68 (.381)
Mounting Hole Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
5,54(.218) 5,54(.218)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
17,96 (.707)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting Hole
Signal
Contact
2,80 (.110)
63,50 (2.500)
2,84 (.112)
PCB Hole Pattern — Standard/European Straight PC Tails — Receptacle
C
13W6
7 #20
0 #8
C
17W5
12 #20
0 #8
C
21WA4
17 #20
0 #8
C
25W3
22 #20
0 #8
C
27W2
25 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
270
Dimensions are shown in mm (inch)
Dimensions subject to change
5,54(.218)5,54(.218)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,84 (.112)
Mounting
Hole
Signal Contact
61,12 (2.406)
2,84 (.112)
5,54(.218) 5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
4,14 (.163)
Mounting
Hole
Signal Contact
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
9,68 (.381)
Mounting
Hole
6,91 (.272) 6,91 (.272)
2,84 (.112)
5,54(.218)5,54(.218)
61,12 (2.406)
2,84 (.112)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
2,80 (.110)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal Contact
PCB Hole Pattern — Standard/European Straight PC Tails — Receptacle
D
24W7
17 #20
0 #8
D
36W4
32 #20
0 #8
D
43W2
41 #20
0 #8
D
47W1
46 #20
0 #8
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Shell Size
Contact Arrangement
No. of Size 20 Cavities
No. of Size 8 Cavities
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
271
Dimensions are shown in mm (inch)
Dimensions subject to change
5,49
(.216) 5,49
(.216)
5,49(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
2,74 (.108)
25,00 (.984)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
5,54(.218) 5,54(.218)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20.70 (.815)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
23,47 (.924)
63,50 (2.500)
24,84 (.978) 24,84 (.978)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
33,32 (1.312)
8,23 (.324) 8,23 (.324)
5,49
(.216)
5,49
(.216) 5,49
(.216)
8,23 (.324)
6,86
(.270) 6,86
(.270)
9,60 (.378) 9,60 (.378)
Mounting
Hole
Signal
Contact 2,74 (.108)
2,54 (.100)
7,19 (.283)
8,64 (.340)
REAR FLANGE REF
REAR FLANGE REF
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84 (.112)
7,19 (.283)
REAR FLANGE REF
8,64 (.340)
REAR FLANGE REF
47,04 (1.852)
25 Contacts
50 Contacts
PCB Hole Pattern — Standard 90°— Plug & Receptacle
9 Contacts
37 Contacts
15 Contacts
Signal Contact XRecommended PCB Hole X
0,76 (.030) 1,14 (.045)
1,00 (.040) 1,40 (.055)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
272
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — European 90°— Plug & Receptacle
5,49
(.216) 5,49
(.216)
5,49(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
2,74 (.108)
25,00 (.984)
2,54 (.100)
REAR FLANGE REF REAR FLANGE REF
10,90 (.429) 9,40 (.370)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
5,49
(.216)
5,49
(.216) 5,49
(.216)
8,23 (.324)
6,86
(.270) 6,86
(.270)
9,60 (.378) 9,60 (.378)
Mounting
Hole
Signal
Contact 2,74 (.108)
2,54 (.100)
9,40 (.370)
10,90 (.429)
REAR FLANGE REF
REAR FLANGE REF
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,70 (.421)
REAR FLANGE REF
47,04 (1.852)
5,54(.218) 5,54(.218)
23,47 (.924)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
22,10 (.870)
19,33 (.761)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
17,96 (.707)
20.70 (.815)
17,96 (.707)
20,70 (.815)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
23,47 (.924)
63,50 (2.500)
24,84 (.978) 24,84 (.978)
2,54 (.100)
9,40 (.370)
REAR FLANGE REF
10,90 (.429)
REAR FLANGE REF
9 Contacts
37 Contacts
15 Contacts
25 Contacts
50 Contacts
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
R e a d e r ’ s R e s o u r c e
273
Dimensions are shown in mm (inch)
Dimensions subject to change
PCB Hole Pattern — Standard/European Straight — Plug & Receptacle
5,49
(.216) 5,49
(.216)
5,49(.216)
8,23 (.324)
Mounting
Hole
Signal
Contact
2,74 (.108)
25,00 (.984)
2,84 (.112)
33,32 (1.312)
8,23 (.324) 8,23 (.324)
5,49
(.216)
5,49
(.216) 5,49
(.216)
8,23 (.324)
6,86
(.270) 6,86
(.270)
9,60 (.378) 9,60 (.378)
Mounting
Hole
Signal
Contact
2,74 (.108)
2,84 (.112)
5,54(.218) 5,54(.218)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
16,56 (.652)
13,82 (.544)
11,05 (.435)
8,28 (.326)
5,54(.218)
8,28 (.326)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
12,42 (.489)
15,19 (.598)
6,91 (.272)
9,68 (.381)
Mounting
Hole
Signal
Contact
2,80 (.110)
2,84 (.112)
47,04 (1.852)
9 Contacts
37 Contacts
15 Contacts
25 Contacts
50 Contacts
R e a d e r ’ s R e s o u r c e
274
Signal Contact XRecommended PCB Hole X
0,60 (.024) 1,00 (.039)
0,76 (.030) 1,14 (.045)
1,00 (.040) 1,40 (.055)
Mounting Type Recommended PCB Hole X
Without Boardlock 3,05 (.120)
With Boardlock 3,10 (.122)
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Lease Tooling
ABT-607 Pneumatic Crimper
The ABT-607 is a pneumatic powered and controlled machine. It is designed for customers with
moderate volume. This machine is designed to semi-automatically crimp stamped and formed contacts
onto pre-stripped stranded or single conductor electrical wire. This machine will accomodate size 34 thru
12 AWG wire and is actuated by the use of a foot pedal.
Machine Crimp Rate: 800 per hour
Power Requirements: Pneumatic =100 psi, 2 cu. ft. per min.
ABT-607
Products: D*A, MDSM, 75 Ohm Crimp Coax
ABT-620 UCCS Semi-Automatic Crimper/Stripper
The ABT-620 Universal Cannon Crimper/Stripper is a pneumatic powered, microprocessor controlled
machine. It is designed to semi-automatically strip insulation from stranded or single conductor electrical
wire and attach a stamped and formed contact by crimping. The machine will accommodate 34 thru 12
AWG wire. Primary application of the machine is the termination of jacketed cable where the individual
leads cannot be stripped on fully automated equipment. The ABT-620 UCCS operates automatically upon
insertion of a wire or it can be switched over to foot pedal operation as desired.
Machine Strip/Crimp Rate: 1200+per hour
Power Requirements: Electrical =115 VAC, 60 Hz, 20 A
Pneumatic =80 psi, 3 cu. ft. per min.
ABT-620 UCCS
Products: D*A, MDSM
CBT-646 Vibra-Bowl Crimper
The CBT-646, Vibra-Bowl Crimper is a pneumatically powered, electronically controlled machine. It is
designed to semi-automatically crimp closed barrel, machined contacts, as used in the aerospace and
commercial industries. The machine will accommodate wire sizes 30 thru 12 AWG. The CBT-646 is
actuated automatically upon insertion of a pre-stripped stranded or single conductor wire.
Machine Crimp Rate: 1300+per hour
Power Requirements: Electrical =115 VAC, 60 Hz, 5 A
Pneumatic =85 psi, 2 cu. ft. per min.
CBT-646
Products: D*MA
R e a d e r ’ s R e s o u r c e
275
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Glossary of Terms
Glossary of Terms
In every job speciality there are certain words and
phrases used by the ‘‘insiders’’ which after a time
become almost a language unique to that
speciality. D Subminiature technology is a typical
example of that condition.
The following pages provide some explanations, in
an attempt to clarify some of the terms that are
commonly used by engineers and sales staff at ITT
Cannon.
The list is not comprehensive, but highlights many
of the expressions commonly used. Should you
have any comments or additions please contact
us. Feedback will be appreciated.
Accelerated Aging — A connector test in which
temperature, voltage, current, or other parameters
are increased beyond the normal operating values
to observe deterioration in a relatively short period
of time.
Accessories — Auxiliary devices such as cable
clamps, endbells, gaskets, or any number of
mechanical hardware devices that can be added to
a connector.
Alloy — A composition of two or more elements,
of which at least one is a metal. In connector
applications it is usually a combination of metals
which is used to create an alloy superior in
performance to any of its individual components.
Alternating Current — A flow of electricity which
reaches a maximum in one direction, decreases to
zero, then reverses itself and reaches maximum in
the opposite direction. This cycle is repeated
continuously. The number of such cycles per
second is the frequency. The average value of the
voltage during any cycle is zero. Abbreviated ac.
Ambient Temperature — The temperature of the
environment surrounding the connector. Usually
the air. Normally used as the reference when
specifying the OPERATING TEMPERATURE range
of the connector.
Ampere — A unit of electrical current or rate of
flow of electrons. One volt across one ohm of
resistance causes a current of 1 ampere.
Abbreviated Amp or A.
Anodize — A protective, insulating oxide layer
formed on a metal by electrolytic action.
Occasionally used as the outer most layer in
connector plating, anodize is a very tough, non-
conductive plating.
Attenuation — Power loss in an electrical system,
expressed in decibels.
AWG — American Wire Gauge. A standard for wire
diameters based on the approximate circular mil
area of the wire. As numbers get larger, wire
diameters decrease in size (a size 16 AWG wire
has a larger diameter than a size 22 AWG).
Backshell — (Also known as Endbell) The outer
rear end of the connector which is attached by
means of internal threads or screws. It adapts the
connector to its wire connections in a variety of
ways. Typical backshells might have cable clamps
to secure a wire bundle, ridges for heat shrink
tubing, pipe threads, or shielded termination
mechanisms. Backshells may be straight, 90°, or
45°.
Bandwidth — The range of frequencies within
which performance falls within specific limits.
Usually the bandwidth is given as an operating
range and the operating specifications apply only
to that bandwidth, unless otherwise stated.
Bar — A centimeter-gram-second unit of pressure
(force exerted on a unit of area) equal to 1,000,000
dynes per square centimeter. Formerly known as
microbar. Its symbol is b.
Base Metal — The metal which the connector or
connector component is made and over which
various platings will be deposited.
Beryllium Copper — An alloy of copper used to
make contacts. It is relatively expensive, but has
superior spring qualities, is resistant to fatigue, and
can operate at higher temperatures than other
materials such as phosphor bronze. It is used
when numerous insertion and extraction cycles
are required.
Body — The main portion of the connector made
of the shell, insulator, and contacts.
Boot — A rear accessory, usually made of a
resilient material, which is used around a
multiconductor cable to add additional insulation,
strength, abrasion resistance, or sealing.
Brass — Metal alloy of copper and zinc used for
contacts. It is low cost, an excellent conductor,
and resists fatigue.
Breakdown — An electrical discharge through a
connector insulator or insulation on a wire. A
catastrophic failure mode.
Breakdown Voltage — The voltage at which an
insulator ruptures.
Breakout — The point at which wires are
separated from a multi-conductor cable or wire
bundle for routing to other points.
C — Abbreviation for Centigrade, or more properly
Celsius, since the term Centigrade was officially
abandoned by international agreement in 1948.
See CELSIUS.
Cable Assembly — A cable (or bundle of cables)
with plugs and/or receptacles on each end.
Cable Clamp — A rear connector clamping
accessory which tightens over a cable or wire
bundle to provide strain relief to the cable. The
cable clamp may be part of a more elaborate
endbell or it may be used alone. Some cable
clamps also provide cable jacket sealing using a
resilient gland; for example the MS3057-C, others
provide only strain relief.
Cadmium — A metallic element chemically
related to zinc and mercury, widely used for
plating. It has an extraordinary ability to resist
outdoor corrosion. It is especially resistant to
alkali. Cadmium is electrically conductive and it is
easy to solder. Its symbol is Cd.
CECC — Abbreviation for Electronic Components
Committee of CENELEC, the European committee
for Electrotechnical Standardization. CECC uses
the IEC test methods, and thus is based upon
worldwide standards.
Celsius — A temperature scale in which the
freezing point of water is 0°and the boiling point is
100°at normal atmospheric pressure. Formerly
known as Centigrade, but officially changed to
Celsius by international agreement in 1948.
CEN — Abbreviation for European Committee for
Standardization. A European standards group
corresponding to the ISO at the European level.
CENELEC — Abbreviation for European
Committee for Electrical Standardization. A
European standards group corresponding to the
IEC at the European level.
Chamfer — A bevel cut on the inside edge of an
insulator contact cavity or a mounting hole. In a
contact cavity the chamfer is intended to guide the
mating pin into the cavity. In a mounting hole it is a
countersink to accept a cone shaped bolt.
Characteristic Impedance — The characteristic
impedance of a transmission line is the impedance
of the line when it is terminated in a perfect load (a
load that absorbs all the energy and reflects none,
such that VSWR =1.00).
Clearance Hole — See Through Hole.
Closed Entry — An insulator design which limits
the diameter of the mating contacts.
R e a d e r ’ s R e s o u r c e
276
D Subminiature Glossary of Terms
Glossary of Terms
Closed Socket Contact — A socket contact in
which the mating cavity limits the entry of a contact
or probe having a diameter larger than the mating
pin.
Coax — Abbreviation for coaxial.
Coaxial Cable — A cable that comprises a single
copper wire surrounded by insulating material,
wire shielding or mesh, and a plastic protective
sheath.
Component — An essential functional part of the
connector.
Contact — The conductive element in a connector
which makes the actual connection between the
wire and the mating connector for the purpose of
transferring electrical energy. Ideally the contact
should add nothing to the circuit. In the real world,
however, contacts typically have a small
CONTACT RESISTANCE and associated potential
drop.
Contact Alignment — The overall play that a
contact has in the insulator cavity to allow the
mating contacts to self align. Also called contact
float.
Contact Arrangement — See LAYOUT.
Contact Cavity — A defined hole in the connector
insulator into which the contacts fit. The cavities
are generally marked with a unique designation or
number for ease of identification.
Contact Resistance — The maximum amount of
resistance which a contact introduces into the
connection when carrying a specified current
(usually stated in milliohms). When not stated,
values are typically given for ‘‘Initial’’ or ‘‘new’’
contacts. Most specifications also limit the
maximum resistance during or after each of a
series of extreme tests, such as ‘‘Contact
Resistance After Corrosion Test’’. These figures
are typically slightly higher than ‘‘Initial’’.
Contact Retention — The maximum allowable
axial load which can be applied to a contact from
either direction without it being dislodged from the
insulator. Usually stated in Newtons or pounds of
force.
Contact Separation Force — The force required
to separate a pair of mated contacts. Usually
stated in Newtons or pounds of force.
Contact Size — This usually relates to the
maximum size wire this contact can nominally
accommodate. It is based on that AWG size most
closely corresponds to the circular mil area of the
engaging end of a pin contact for that size. For
example, a size 1 6 contact can accomodate a size
16 AWG wire maximum and the pin corresponds to
the CMA of a size 16 AWG. Note, however, that
oversized crimp pots are available for some crimp
contacts which will allow, for example, a size 16
contact to accommodate a size 14 AWG wire.
Contact Spacing — The distance between the
centers of adjacent contacts.
Creepage — The conduction of electricity across
the surface of an insulator.
Creepage Distance — The shortest distance
between contacts of opposite polarities, or
between a live contact and ground, measured over
the surface of the insulator.
Creepage Path — A path across the surface of the
insulator between two conductors. Lengthening
the path reduces the possibility of arc damage.
Crimp — A method of attaching a contact to a wire
through the application of pressure.
Crimp Contact — A contact which is terminated to
a wire by means of crimping with an appropriate
die and tool. After termination, an insertion tool is
normally used to insert the crimped contact into
the connector. Removable crimp contacts can be
FRONT RELEASE or REAR RELEASE. An
extraction tool is usually required to remove the
contact.
Crosstalk — Undesired electrical currents in
conductors caused by electromagnetic or
electrostatic coupling from other conductors or
from external sources. Also, leakage of optical
power from one optical conductor to another.
CSA — Abbreviation for Canadian Standards
Association.
Current — The movement of electrons through a
conductor. Current is measured in amperes. Its
symbol is L.
Current Rating — The maximum current that a
particular wire, contact, or connector can
accommodate. NOTE: When several wires are
used in a single connector or elevated temperature
or altitude is involved, derating curves must be
applied to these ratings. A typical derating system
is MIL-W-5088 which allows the user to calculate
the derating effects of current, ambient
temperature, number of wires in the bundle, and
altitude.
Decibel — A standard unit of measure for
transmission gain or loss. It expresses the ratio of
power input to power output. Abbreviated dB. The
term dBm is used when 1milliwatt is the reference
level.
Derating — To reduce the voltage, current, or
power rating of a connector to improve its
reliability or to permit operation at high ambient
temperatures or altitudes.
Derating Curve — A graph of the change in power
handling capability of a connector as a function of
ambient temperature or altitude. Typically the
graphed function is curved, hence the name.
Diallyl Phthalate — A thermosetting plastic used
for insulators and some types of connector
housings. It has outstanding resistance to
chemicals, excellent dimensional stability, and
superior electrical insulating properties.
Dielectric — An insulator used to isolate two
conductors having a low loss factor (RF cables).
The perfect insulator is a vacuum.
Dielectric Constant — That property (K) of an
insulating material which is the ratio of the parallel
capacitance (C) of a given configuration of
electrodes with the material as the dielectric, to the
capacitance of the same electrode configuration
with a vacuum as the dielectric.
Digital — A signal comprising discrete elements.
DIN — Abbreviation for Deutsche Industrie Norm,
a German standards organization.
Direct Current — An essentially constant value of
current that flows in only one direction.
Abbreviated dc.
Dust Cap — A cover used in place of a mating
connector to seal it against dirt and moisture.
Usually secured to the connector by a captive
chain, wire, or rope.
Electroplating — To deposit a metal on the
surface of a conductor using electrolysis.
EMI/RFI — Electro-Magnetic Interference and
Radio Frequency Interference. This is unwanted
stray electronic radiation which may enter, and/or
be emitted by an electronic system. The most
common method of shielding interconnections
against this radiation is to use wires with a metallic
braided shield and a connector system which will
extend the shield through the interconnection. This
type of design will keep radiation from entering, or
being emitted by the system. Backshells for
shielded cable and connectors with threads or
grounding fingers are typically used for this
purpose. Call for the specific EMI/RFI
accommodations of the connectors in this catalog.
R e a d e r ’ s R e s o u r c e
Dimensions are shown in mm (inch)
Dimensions subject to change 277
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Glossary of Terms
Glossary of Terms
EN — Abbreviation for Euro Norm. A European
market-wide product standard.
Endbell — See BACKSHELL.
Extraction Tool — A device used to remove a
(removable) contact from a connector insulator.
The extraction tool may be inserted into the mating
face of the insulator (FRONT RELEASE) or the wire
side (REAR RELEASE). In either case, the contact
comes out the rear, or wire side, of the connector.
Fahrenheit — A temperature scale in which the
freezing point of water is defined as 32°and the
boiling point is 212°at normal atmospheric
pressure. See the conversion tables for converting
Fahrenheit to Celsius. Abbreviated F.
Female Contact — See SOCKET CONTACT.
Ferrule — A bell shaped ring which is placed over
a WIRE SEALING GROMMET to provide uniform
axial compression of the grommet and to minimize
the transmission of torque to the grommet when
the backshell is screwed on to the rear of the
connector. Ferrules are a part of the sealing
mechanism at the rear of a connector. Ferrules are
normally a separate component part of the
connector although some backshells have
integrated ferrules. Ferrules are usually made from
a thermoplastic material, but occasionally ferrules
are made of metal.
Finish — The metalic coatings used on contacts
and metal connectors. These are thin layers of
metal designed to improve conductivity,
solderability, or to resist corrosion. Typical contact
finishes are gold or silver. Typical shell finishes are
olive drab over cadmium, electroless nickel, or
black anodize.
Flange — A square mounting flange with four
mounting holes for bolting the connector to a
panel. The mounting holes may be through holes
or threaded.
Flanged Receptacle — (Also known as a Box
Mount or Wall Mount) The shell of this connector
has a square flange with mounting holes at each
corner. Mounting holes are usually through holes,
but may be threaded. Flanged receptacles can
usually be front or rear panel mounted depending
upon panel thickness. Some connectors have two
different versions, one for front mounting, and one
for rear panel mounting.
Flash Plating — As commonly used in connector
terminology, flash refers to extremely thin platings
of metal, for example: gold flash is a very thin
plating of gold. So thin, that the thickness is
generally not specified.
Front Mounting — A receptacle that can only be
mounted to the front of a panel with its mounting
FLANGE outside the equipment.
Front Release — For crimp type removable
contacts, front release means that the appropriate
extraction tool is
inserted from the front
, or mating
face, of the connector. The contact is then pushed
out the
rear
(wire side) of the connector.
Gas Tight — The mating of two contact surfaces
which are so tight that corrosive gasses can not
enter the joint.
Gold — A precious metal that is more conductive
than silver or copper. Because it does not corrode
and is highly conductive, it is used as plating for
contacts. Its chemical symbol is Au.
Grommet Cavity — A defined hole in the WIRE
SEALING GROMMET through which the wires are
passed. The cavities are generally marked with a
unique designation or number for ease of use.
Guide Pin — A special pin which is inserted into a
socket contact before the contact can be inserted
into the connector insulator. Guide pins provide a
rounded surface at the front of the socket and
greatly aid in pushing the contact into the insulator
thus avoiding damage to both the insulator and the
contact. Typically, small size socket contacts
require the use of guide pins while larger sizes can
be inserted without them.
Harness — A group of wires or cables bundled
together with attached connectors and/or
components in a preshaped assembly.
Hz — Symbol for Hertz, an international unit of
frequency equal to one cycle per second. That is,
20,000 Hz is 20,000 cycles per second.
I/O — Input/Output
IEC — Abbreviation for the International
Electrotechnical Commission. An international
organization that develops standards exclusively
for electrical engineering. CENELEC is the
equivalent organization at the European level.
Impedance Match — When a transmission line is
terminated so that VSWR = 1.00. Another
definition is when a source is terminated in an
impedance that allows optimum energy transfer.
Indentor — The part of a crimping die which
indents the contact barrel to form the actual crimp.
Indentors normally make six or eight multiple
indentions for each crimp.
Initial — A test result taken prior to any other
environmental testing. For example, contact
resistance is frequently specified ‘‘Initial’’, that is,
with ‘‘new’’ contacts. Most specifications also
limit the maximum resistance during or after each
of a series of extreme tests, such as ‘‘Contact
Resistance After Corrosion Test’’. These figures
are typically slightly higher than ‘‘Initial’’.
Insert — See INSULATOR.
Insert Arrangement — See LAYOUT.
Insert Retention Force — The maximum
allowable force which should be applied to the face
of the insulator without dislodging it from the shell
or causing any change in connector performance
specifications. Usually stated in Newtons or
pounds of force.
Insertion Force — The effort, usually stated in
ounces or Newtons, required to engage two
contacts or connector halves.
Insertion Loss — The attenuation that results
when a transducer is inserted in a transmission
line. It is the ratio of the power input to the
transducer to the power out of the transducer
expressed in decibels.
Insertion Tool — A small, hand-held tool used to
insert contacts into a connector.
Insulation — A material that has high electrical
resistance and is suitable for covering or encasing
electrical components to prevent a short circuit.
Insulation Displacement Connector (IDC) — A
connector contact with sharp tines which pierce
and displace the wire insulation and make direct
electrical connection with the conductor. Normally
used with multipin connectors which must be
terminated to flat cable. This is a fast, low cost
method to terminate many conductors
simultaneously.
Insulation Resistance — The minimum
resistance (usually stated in Megohms) between
adjacent contacts and between the contacts and
the shell at a specific voltage. When not stated,
values are typically given for new insulators. Most
specifications also specify minimum resistance
figures during or after each of a series of extreme
tests, such as ‘‘Insulation Resistance During Dry
Heat’’.
Insulation Support — An extended portion at the
rear of a crimp contact that is crimped around the
wire insulation to provide extra strain relief. This
crimp is in addition to the crimp over the conductor
which provides the actual electrical termination.
R e a d e r ’ s R e s o u r c e
278
Dimensions are shown in mm (inch)
Dimensions subject to change
R e a d e r ’ s R e s o u r c e
Insulator — The insulating element into which the
contacts are mounted in a connector. This can be a
resilient material, thermoplastic, or a thermoset
compound, among other materials.
Insulator Rotation — A method of differentiating a
circular connector if more than one connector with
the same sex and layout is to be used in a system.
The insulator is permanently positioned in the shell
so that only a connector with the same degree of
rotation can be mated with it. Possible rotations are
specific to each layout with some layouts having
many possible rotations and others having none. A
chart of valid rotations is listed by layout for
connectors capable of being rotated. Most
connector series use the military convention of
assigning letter designations for specific degrees
of rotation (for example: W, X, Y, Z). See KEYING.
Interchangeable — The characteristic of
connectors in which a connector half of one
manufacturer or series will directly replace that of
another manufacturer and provide the same
electrical and mechanical function.
Intermateable — The characteristic of connectors
in which a connector half of one manufacturer or
series will mate directly with the connector half of
another manufacturer.
Intermittent — Occurring at intervals. A
connection which passes electrical current only in
random or undesirable intervals.
Intermountable — The characteristic of
connectors in which one manufacturer’s
connector or series will mount in exactly the same
panel space and mounting holes as another
manufacturer’s product.
ISO — Abbreviation for the International Standards
Organization. A group that operates at the
international level and sets most standards for
industry, with the exception of electrical
engineering and telecommunications which are set
by the IEC and ITU respectively. CEN is the
equivalent organization at the European level.
Jacket — The outermost layer of insulation in a
cable composed of several wires.
Jackscrew — A screw attached to one half of a
connector pair used to mechanically align, draw
them together, and lock them in place.
Key — A mechanism used to polarize connectors
by the user. See KEYING.
Keying — A method of differentiating a connector
if more than one connector with the same sex and
layout is to be used in a system. The key is usually
a pin or other projection which can be located in a
contact cavity or slot. The key will prevent a
connector without a matching orifice from mating.
Keying and POLARIZATION serve the same
function, but keying can be done by the user, while
polarization is manufactured into the connector
and normally can not be altered by the user.
Layout — The number, size, and geometric
arrangement of the contacts in a connector. When
a connector is said to have a certain ‘‘layout’’ it
refers to a specific contact configuration. For
example, Combo Dhas 2 pages of drawings
showing the arrangement of the contacts in the
insulator. Each of these contact cavity
arrangements can be referred to as a layout.
Locator — A part of a crimping tool TURRET.
Rotation of the locator sets the tool for a particular
size or sex contact. See TURRET.
Male Contact — See PIN CONTACT.
Mating Life — The minimum number of times a
connector can be mated and unmated and still
meet all of its design specifications. The maximum
life may be much higher than this figure.
Mil — One thousandth of an inch (.001). Used in
the United States as a unit of length in wire
diameters and linear dimensions.
Mil-Spec — Abbreviation for Military
Specification.
Milliampere — One one-thousandth (.001) of an
ampere. Abbreviated mA.
Millimeter — Metric unit of linear measure.
1millimeter = .03937 inches. Abbreviated mm.
Milliohm — One one-thousandth (.001) of an
ohm. Abbreviated mȉ.
mm2— Millimeters squared. A standard for wire
diameters used in Europe instead of AWG. As
numbers get larger, wire diameters increase in
size. The relationship between mm2and AWG is
reverse logarithmic. 1mm2=1973 circular mils. A
conversion graph is needed to make accurate
comparisons between AWG and mm2. Call for
assistance.
Mounting Clip — Any of a variety of mounting
accessories used to secure a connector or
connector pair to a rigid surface.
Multi-Conductor Cable — Two or more individual
wires surrounded by a jacketing material.
Nest — The portion of a crimping die that supports
the contact barrel during crimping.
Newton — A unit of acceleration. One Newton is
the force capable of accelerating 1kilogram to one
meter per second per second. 1 pound force =
4.448221Newtons. Abbreviated N.
Ohm — The unit of electrical resistance. One ohm
is the value of resistance through which a potential
difference of one volt will maintain a current of one
ampere. Its symbol is the Greek letter omega (ȉ).
Operating Temperature — The range of
AMBIENT TEMPERATURES over which the
connector can operate and still meet all of its
design specifications.
Operating Voltage — The range of voltages over
which the connector can be operated. Safety
precautions must be taken anytime a voltage in
excess of 50V is to be used in a circuit. Check your
local and national codes for guidelines.
Outgassing — The circumstance in which an
insulator releases gasses trapped within it under a
vacuum or conditions of decreased pressure, high
heat, or both.
Panel — The outside surface of a piece of
equipment on to which connectors are mounted.
The panel is usually made of metal.
Panel Mount — A connector designed to be
mounted on a panel by means of screws or jam
nut.
PCB — Abbreviation for Printed Circuit Boards.
Performance Class 1 — Performance class per
European specification DIN 41652, specifying
contact performance to 500 mating cycles,
followed by testing per DIN 41640, Part 21. The
contact is subjected to severe environmental
conditions, including industrial gasses, after the
500 mating cycles, and must meet basic contact
resistance, engaging force, and separation force
tests.
Performance Class 2 — Performance class per
European specification DIN 41652, specifying
contact performance to 200 mating cycles,
followed by testing per DIN 41640, Part 21. The
contact is subjected to severe environmental
conditions, including industrial gasses, after the
200 mating cycles, and must meet basic contact
resistance, engaging force, and separation force
tests.
D Subminiature Glossary of Terms
Glossary of Terms
279
Dimensions are shown in mm (inch)
Dimensions subject to change
Performance Class 3 — Performance class per
European specification DIN 41652, specifying
contact performance to 50 mating cycles,
followed by testing per DIN 41640, Part 21. The
contact is subjected to severe environmental
conditions, including industrial gasses, after the
50 mating cycles, and must meet basic contact
resistance, engaging force, and separation force
tests.
Peripheral Seal — A resilient seal used to keep
moisture from entering the connector at the point
where the plug and receptacle shells meet. A
common method is to use flat gaskets on
receptacles and O-rings on plugs.
Phosphor Bronze — An alloy of copper, tin, and
phosphorus used to make spring contacts. It is
typically used in lower cost contacts where
frequent insertions and withdrawals and high
temperatures are not a factor.
Pin — A male contact. See PIN CONTACT.
Pin Contact — The contact which has a long shaft
at the engagement end which enters the socket
contact.
Plating — See FINISH.
Plug — The male portion of a connector pair
usually employing a coupling nut to secure it to the
receptacle half. A plug may have either pin or
socket contacts.
Polarization — A mechanical mechanism that
allows connector halves to intermate in only one
specific orientation. This can be accomplished by
asymmetrical shapes of the two halves as in a D
Subminiature connector, insulator rotation, keys,
keyways, ramps, or other means. Polarization
prevents connectors of the same size and/or same
layout from intermating when this is undesirable,
such as when two otherwise identical connectors
are used on the same panel. Polarization is
typically done by the assembler and can not be
changed by the user, while keying is typically done
by the user with an auxiliary keying device.
Polarizing Pin — A mechanism used to polarize
connectors, manufactured into the connector. See
KEYING.
Potting — The permanent sealing of a cable to a
connector using an insulating material such as
potting compound to exclude moisture or provide
strain relief. See POTTING CUP.
Potting Compound — A sealing material used in
potting to fill a potting cup.
Potting Cup — A bell-shaped (plastic) backshell
with an enlarged opening for the wires. After the
connector is loaded with wired contacts, the
potting cup is attached to the rear of the connector.
The inside of the cup is then filled with a potting
compound. When the compound hardens, it forms
a solid, permanent, watertight mass around the
wires.
Potting Ring — A portion of the POTTING CUP
which secures the bell shaped cup to the rear of the
connector, usually by means of internal threads.
Pre-Tin — To apply tin-lead solder to the contact
solder cup and/or conductor prior to soldering the
two together.
Rear Mounting — A receptacle that mounts
through the panel from the rear, with its mounting
flange inside the equipment. Typically, rear mount
receptacles are slightly longer than front mount
types to allow for the thickness of the panel. Flange
mount receptacles usually come in front and rear
mount versions. All Jam nut receptacles are rear
mount.
Rear Release — For crimp type removable
contacts, rear release means that the appropriate
extraction tool is
inserted from the rear
, or wire
side, of the connector. The contact is then pulled
out the rear of the connector.
Receptacle — The connector half that mates with
the plug. The receptacle has threads, pins or
ramps which engage the coupling nut on the plug,
locking the two halves together. A receptacle may
have either pin or socket contacts.
REF — Abbreviation for Reference.
Removable Contact — A contact which can be
inserted and removed from the insulator by the
user. An insertion tool and extraction tool are
normally required to insert and remove the contact.
Removal Tool — See EXTRACTION TOOL
Resistance — That property of a substance which
impedes current and results in the dissipation of
power in the form of heat. The unit of resistance is
the ohm.
Return Loss — The ratio of the power reflected
from a discontinuity in a transmission line to the
power incident.
RFI — See EMI/RFI.
Root Mean Square — The square root, of the
average of the squares, of the values of a periodic
quantity (like alternating current), taken through
one complete period. It is the effective quantity of a
periodic quantity. Abbreviated rms.
Salt Spray Test — A test, or series of tests, in
which mated and/or unmated connectors are
subjected to salt water under specified conditions.
Used to test the connector’s resistance to corrosion
and any associated degradation in electrical
function.
Screw Machine Contact — A contact made from a
solid bar or rod using screw machine operations.
Some screw machine contacts include secondary
elements which are welded, crimped, or formed
around the basic screw machined part to complete
the contact.
Selective Plating — The application of metal
PLATING to selective areas of the contact,
particularly those areas subject to wear. Precious
metal platings may be applied selectively to those
contact surfaces responsible for the electrical
connection, reducing the contact cost without
sacrificing electrical performance.
Shell — The outside case of a connector into which
the insulator and contacts are situated.
Shell Size — A standard system developed for
military circular connectors for indicating the
diameter of the shell. The system is based upon 116
increments, that is, a size 16 shell is one inch in
diameter.
Shield Effectiveness — The ability of a shield to
screen out undesirable signals.
Shock — An abrupt impact applied to a stationary
object. It is usually expressed in gravities (g).
Socket — A female contact. See SOCKET
CONTACT.
Socket Contact — The contact which has an
opening at the engagement end to accept the pin
contact.
Solder Contact — A contact which is terminated to
the wire with solder. Solder contacts are normally
bonded into the insulator and can not be removed
by the user. The alternative is crimp contacts to
which a wire is attached by crimping. Crimp
contacts can usually be inserted and removed by
the user.
Solder Cup — The end of a SOLDER CONTACT is
designed to accept a wire which will then be
soldered to the contact.
Stamped and Formed Contact — Contacts made
by stamping and forming a sheet of metal rather
than by machining metal stock. Also see SCREW
MACHINE CONTACTS.
D Subminiature Glossary of Terms
Glossary of Terms
R e a d e r ’ s R e s o u r c e
280
Dimensions are shown in mm (inch)
Dimensions subject to change
Star Clip — One of several designs used for screw
machine socket contacts. A tiny plated star shaped
clip is captivated inside a solid barrel into which the
pin contact fits. The clip creates a multi-point area
of mechanical and electrical continuity between
the mated contacts.
Stripper — A tool to remove insulation from a
wire.
Test Voltage — The range of voltages over which
the connector has been tested per the perimeters
in the applicable specification.
Thermoplastic — A plastic material that can be
softened by heat and rehardened into a solid state
by cooling. This process can be accomplished
using a variety of techniques.
Thermoset — A plastic material which hardens
when heat and pressure are applied. Unlike
thermoplastic, it cannot be remelted or remolded.
Through Hole — (Also known as a clearance hole)
A mounting hole without threads.
Turret — An interchangeable device which is
attached to a CRIMP TOOL that allows the tool to
crimp a range of contacts. Each turret is made to
crimp a specific style contact or a range of
contacts and/or wire gauges. See LOCATOR.
UL — Abbreviation for Underwriter’s
Laboratories, a corporation supported by a group
of underwriters for the purpose of establishing
safety standards covering certain types of
equipment and components in the United States.
UL 94V-O — A flammability performance rating
set by Underwriter’s Laboratories for plastics.
V — Symbol for volt.
Vac — Volts, alternating current.
Vdc — Volts, direct current.
Vibration — A continuously reversing change in
the magnitude of a given force.
Volt — The unit of measurement of electromotive
force. It is equivalent to the force required to
produce a current of 1 ampere through a
resistance of one ohm.
Voltage— The force which causes current to flow
through an electrical conductor. Its symbol is E.
The greatest effective difference in potential
between and two conductors of a circuit.
Voltage Drop — The difference in voltage
between two points in a circuit due to the loss of
electrical pressure as a current flows through an
impedance.
D Subminiature Glossary of Terms
Glossary of Terms
R e a d e r ’ s R e s o u r c e
281
Voltage Rating — The maximum voltage which a
connector can sustain without breaking down or
varying from design specifications.
Voltage Standing Wave Ratio — If a signal is sent
down a transmission line any discontinuity will
send a reflection back in the opposite direction.
Wire Sealing Grommet — A resilient disc with
holes in it to accommodate the individual wires
entering the rear of the connector. Each cavity
forms a tight seal against the wire insulation (as
long as wires within the specified diameter are
used). The grommet seals the back of the
connector against moisture, dirt, and air. The
grommet is normally held in place and
compressed by a backshell and/or ferrule. It is
usually a separate component, but may be part of
the insulator itself. Also see GROMMET CAVITY.
Wire Size — A numerical designation for
conductor diameter. This catalog uses American
Wire Gauge (AWG) which is based on the
approximate circular mil area of the wire. See AWG
and mm2.
Wrap Post Contact — A type of contact which is
terminated by wrapping wire around a post in a
manner that deforms the wire and creates a gas-
tight connection between the wire and the post.
This method is slow and labor intensive. If used at
all, it is used in prototype work.
Dimensions are shown in mm (inch)
Dimensions subject to change
R e a d e r ’ s R e s o u r c e
D Subminiature Reader’s Resource
Obsolete Products
General Application Connectorsɍ
D*C
Burgun D
with snap-in, rear
release machined or stamped
crimp contacts. Refer to D*U
products.
D*P 90°connectors for I/O
applications, UL 94V-0 rated.
Refer to D*U products
Available Products Not Listed Within This Publication
General Application Connectorsɍ
D*U
Burgun D
with snap-in, rear
release machined or stamped
crimp contacts, UL 94V-0 rated.
D*SF
Speedy D
for IDC ribbon cable, UL
94V-0 rated, accomodates Sizes
28-26 AWG cable on 1,27 (.050)
conductor spacing.
ɍCommercial Applications Only
D*MA Military specification quality
removable crimp style contacts for
high performance applications.
ZD*A Low cost, stamped contacts, high
density 90°PCB connectors.
Special Application Connectorsɍɍ
GD*
Grommet D
environmentally
sealed, crimp, snap-in, rear
release contacts.
D*D Environmentally sealed, cast
aluminium shell. Product not
intermatable with M24308 type
D Subminiature connectors.
ɍɍ Military or Commercial Applications
Consult factory for details.
282
D*PF Straight and 90°PCB applications,
UL 94V-0 rated. Refer to D*
products.
AD* Part number change only.
Refer to ZD* products.
D*11148
D*(SMT) SMT – Surface Mount D,
no replacement, only through
holes available. Refer to ZED*
products.
D*P1 Machined pressfit replaced by
stamped pressfit. Refer to D*NG
products.
D*TC Part number change only.
Refer to D* products.
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Part Number Index
Part Number Page Part Number Page Part Number Page Part Number Page
015-8755-000 .......................207
015-8755-001 .......................207
030-2042-002 .......................195
030-2487-016 ........................83
030-2487-017 ........................83
030-2488-016 ........................83
030-2488-017 ........................83
030-8848-020 ...................187, 1 95
030-8882-002 ...................187, 1 95
031-1007-052-05.....................195
031-1147-002 .......................195
031-8787-020 ...................187, 1 95
031-8843-001 ...................187, 1 95
031-8902-000 .......................195
031-8902-001 .......................187
031-8944-000 ...................187, 1 95
070051-0000.........................89
070064-0002 ........................88
075-0354-003 .......................218
110238-1012 .........................84
110238-1013 .........................84
110238-1014 .........................84
110238-1015 .........................84
248-2967-000........................95
249-2271-000 ........................84
249-2272-000........................84
250-8501-004 .......................201
250-8501-009 .......................201
250-8501-010 .......................201
250-8501-013 .......................201
259-8760-000.......................207
274-5016-002 .......................187
274-7003-000 .......................187
274-7048-000 .......................187
304-0444-000........................84
304-8810-000 .....................40, 82
304-8811-000 .....................40, 82
304-8812-000 .....................40, 82
304-8813-000 .....................40, 82
323-7010-000 .......................187
330-5291-081-02.....................195
330-8753-101 ........................41
330-8753-102 ........................41
330-8753-103 ........................41
330-8754-101 ........................41
330-8754-102 ........................41
330-8754-103 ........................41
330-8782-001 ...................187, 1 95
330-8944-000 .......................195
330-8944-001 .......................187
980-0005-722 .......................187
980-0008-135 ........................83
980-0008-136 ........................83
980-2000-345.......................202
980-2000-346.......................202
980-2000-347.......................202
980-2000-348.......................202
980-2000-349.......................202
980-2000-426 .......................187
980-2000-858.......................209
980-2000-859.......................209
980-2000-860 .......................211
980-2000-923........................83
980-2000-924........................83
980-2000-925........................83
980-2000-926........................83
980-2000-943........................83
980-2000-944........................83
980-2000-945........................83
980-2000-946........................83
995-0001-244 .......................187
995-0001-325 .......................187
995-0001-584 .......................187
995-0001-585 .......................187
995-0001-604 .......................187
995-0001-739 .......................187
995-0001-761 ........................85
995-2000-000........................83
995-2000-092 .......................211
995-2000-094........................84
995-2000-110 ........................85
ABT-607 ............................84
CA111972-11 .........................98
CA111972-12.........................98
CA111972-22.........................98
CA112104...........................102
CA112104-1.........................102
CA112104-2 .........................102
CA112104-3 .........................102
CA112104-4 .........................102
CA112104-5 .........................102
CCTP-750HM ........................84
CCTP-DM ...........................84
D110277 ...........................212
D110278 ...........................212
D110279 ...........................212
D110280 ...........................212
D110550 ...........................213
D110551............................213
D115418-70 .........................195
D115433-1........................40, 82
D115433-2........................40, 82
D115433-3........................40, 82
D121073-19.........................201
D121073-39.........................209
D121073-40.........................209
D121073-41.........................209
D121073-42.........................209
D130322-1...........................84
D130322-2 ..........................84
D130322-6 ..........................84
D130344 ............................84
D130344-1...........................84
D130344-2 ..........................84
D130356 ............................85
D130356-1...........................85
D130356-3 ..........................85
D130357 ............................85
D130357-1...........................85
D130357-4 ..........................85
D20418-101......................194-195
D20418-2 ..........................209
D20418-39 .........................209
D20418-50 .........................209
D20418-52 ......................194-195
D20418-70..........................194
D20418-74 .........................209
D20418-80 .........................209
D20419............................208
D20419-104.........................208
D20419-18..........................208
D20419-21..........................208
D20419-48 ......................194-195
D20419-73 ......................194-195
D20419-74 ......................194-195
D20419-84 ......................194-195
D20420 ............................208
D20420-13 .........................208
D20420-15 .........................208
D20420-49 ......................194-195
D20420-63 ......................194-195
D20420-67 ......................194-195
D20420-86 .........................208
D20420-88 ......................194-195
DA-59-20 .......................195, 218
DA-60-20 .......................195, 218
DA111806-1 .........................216
DA111806-5 .........................216
DA111810 ...........................216
DA111810-3.........................216
DA115339-1.........................207
DA115339-21........................205
DA115386-104A ......................195
DA115386-2B .......................207
DA121073-150.......................200
DA121073-50 .......................200
DA15P-0L2-K87 .......................10
DA15P-1A5N-K87 .....................26
DA15P-1A6N-K87 .....................26
DA15P-1A7N-K87 .....................22
DA15P-1A8N-K87 .....................22
DA15P-1A9N-K87 .....................22
DA15P-1ADN-K87 .....................24
DA15P-1AFN-K87......................22
DA15P-1AJN-K87......................24
DA15P-1AON-K87 .....................20
DA15P-1ATN-K87 .....................26
DA15P-1AUN-K87 .....................26
DA15P-1AVN-K87 .....................24
DA15P-1AWN-K87 .....................24
DA15P-F179A-K87 .....................12
DA15PK87 ...........................32
DA15S-0L2-A197 ......................11
DA15S-1A5N-A197.....................27
DA15S-1A6N-A197.....................27
DA15S-1A7N-A197.....................23
DA15S-1A8N-A197.....................23
DA15S-1A9N-A197.....................23
DA15S-1ADN-A197 ....................25
DA15S-1AFN-A197 .....................23
DA15S-1AJN-A197 .....................25
DA15S-1AON-A197.....................21
DA15S-1ATN-A197.....................27
DA15S-1AUN-A197 ....................27
DA15S-1AVN-A197.....................25
DA15S-1AWN-A197 ....................25
DA15S-F179A-A197 ....................13
DA15SA197..........................33
DA19678-1 .........................204
DA19678-157........................195
DA19678-167 ....................193, 1 95
DA19678-174........................195
DA19977-1 .........................204
DA19977-40.....................193, 1 95
DA20961 ...........................203
DA20961-16 .........................192
DA22213 ...........................215
DA22214 ...........................214
DA24658...........................203
DA24658-15.....................192, 1 95
DA50905-1 .........................218
DA51210 ...........................206
DA51211 ...........................206
DA51220-1..........................210
DA53750-1 .........................218
DAA11W1PK87F0......................80
DAA11W1SA197F0 .....................81
DAA15PK87FO........................36
DAA15SA197FO .......................37
DAA3W3PK87F0 ......................80
DAA3W3SA197F0 .....................81
DAA7W2PK87F0 ......................80
DAA7W2SA197F0 .....................81
DABS-15 ...........................205
DABU111512 ........................216
DAE15P-0L2-K87-146 ..................10
DAE15PK87 ..........................32
DAE15S-0L2-A197-146..................11
DAE15SA197.........................33
DAJK15P*-1A0N......................110
DAJK15P*-1A5N......................118
DAJK15P*-1A6N......................118
DAJK15P*-1A7N......................114
DAJK15P*-1A8N......................114
DAJK15P*-1A9N......................114
DAJK15P*-1ADN .....................116
DAJK15P*-1AFN......................114
DAJK15P*-1AGN .....................116
DAJK15P*-1AHN .....................114
DAJK15P*-1AJN......................116
DAJK15P*-1APN......................118
DAJK15P*-1ATN......................118
DAJK15P*-1AUN .....................118
DAJK15P*-1AVN......................116
DAJK15P*-1AWN.....................116
DAJK15P*-1U0N .....................108
DAJK15P*-1U7N......................112
DAJK15P*-1U7N-146..................112
DAJK15P*-OL4 ......................120
DAJK15S*-1A0N......................111
DAJK15S*-1A5N......................119
DAJK15S*-1A6N......................119
DAJK15S*-1A7N......................115
DAJK15S*-1A8N......................115
DAJK15S*-1A9N......................115
DAJK15S*-1ADN .....................117
DAJK15S*-1AFN......................115
DAJK15S*-1AGN .....................117
DAJK15S*-1AHN .....................115
DAJK15S*-1AJN......................117
DAJK15S*-1APN......................119
DAJK15S*-1ATN......................119
DAJK15S*-1AUN .....................119
DAJK15S*-1AVN......................117
DAJK15S*-1AWN.....................117
DAJK15S*-1U0N .....................109
DAJK15S*-1U7N......................113
DAJK15S*-1U7N-146..................113
DAJK15S*-OL4.......................121
DAJKE15P*-1A0N.....................110
DAJKE15P*-1U0N ....................108
DAJKE15P*-OL4 .....................120
DAJKE15P*-OL4-146 ..................120
DAJKE15S*-1A0N .....................111
DAJKE15S*-1U0N ....................109
DAJKE15S*-OL4......................121
DAJKE15S*-OL4-146 ..................121
DAJKX15P*-1A0N.....................110
DAJKX15P*-OL4 .....................120
DAJKX15P*-OL4-146 ..................120
DAJKX15S*-1A0N .....................111
DAJKX15S*-OL4......................121
DAJKX15S*-OL4-146 ..................121
DAJT15P ...........................122
DAJT15S* ..........................123
DAJT3W3P1.........................128
DAJT3W3P1-1A0N....................124
DAJT3W3P1-OL4 .....................126
DAJT3W3P5 ........................128
DAJT3W3P5-1A0N ....................124
DAJT3W3P5-OL4.....................126
DAJT3W3P6 ........................128
DAJT3W3P6-1A0N ....................124
DAJT3W3P6-OL4.....................126
DAJT3W3P9 ........................128
DAJT3W3P9-1A0N ....................124
DAJT3W3P9-OL4.....................126
DAJT3W3S1.........................129
DAJT3W3S1-1A0N....................125
DAJT3W3S1-OL4 .....................127
DAJT3W3S5 ........................129
DAJT3W3S5-1AON....................125
DAJT3W3S5-OL4.....................127
DAJT3W3S6 ........................129
DAJT3W3S6-1A0N ....................125
DAJT3W3S6-OL4.....................127
DAJT3W3S9 ........................129
DAJT3W3S9-1A0N ....................125
DAJT3W3S9-OL4.....................127
DAJT3WK3P1........................128
DAJT3WK3P1-1A0N...................124
DAJT3WK3P1-OL4 ....................126
DAJT3WK3P5 .......................128
DAJT3WK3P5-1A0N...................124
DAJT3WK3P5-OL4....................126
DAJT3WK3P6 .......................128
DAJT3WK3P6-1A0N...................124
DAJT3WK3P6-OL4....................126
DAJT3WK3P9 .......................128
DAJT3WK3P9-1A0N...................124
DAJT3WK3P9-OL4....................126
DAJT3WK3S1........................129
DAJT3WK3S1-1A0N...................125
DAJT3WK3S1-OL4 ....................127
DAJT3WK3S5 .......................129
DAJT3WK3S5-1AON ..................125
DAJT3WK3S5-OL4....................127
DAJT3WK3S6 .......................129
DAJT3WK3S6-1A0N...................125
DAJT3WK3S6-OL4....................127
DAJT3WK3S9 .......................129
DAJT3WK3S9-1A0N...................125
DAJT3WK3S9-OL4....................127
DAJTE15P ..........................122
DAJTE15S* .........................123
DAJTE3W3P1........................128
DAJTE3W3P1-1A0N...................124
DAJTE3W3P1-OL4 ....................126
DAJTE3W3P5 .......................128
DAJTE3W3P5-1A0N ...................124
DAJTE3W3P5-OL4....................126
DAJTE3W3P6 .......................128
R e a d e r ’ s R e s o u r c e
283
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Part Number Index
Part Number Page Part Number Page Part Number Page Part Number Page
DAJTE3W3P6-1A0N ...................124
DAJTE3W3P6-OL4....................126
DAJTE3W3P9 .......................128
DAJTE3W3P9-1A0N ...................124
DAJTE3W3P9-OL4....................126
DAJTE3W3S1........................129
DAJTE3W3S1-1A0N...................125
DAJTE3W3S1-OL4 ....................127
DAJTE3W3S5 .......................129
DAJTE3W3S5-1AON...................125
DAJTE3W3S5-OL4....................127
DAJTE3W3S6 .......................129
DAJTE3W3S6-1A0N ...................125
DAJTE3W3S6-OL4....................127
DAJTE3W3S9 .......................129
DAJTE3W3S9-1A0N ...................125
DAJTE3W3S9-OL4....................127
DAJTE3WK3P1.......................128
DAJTE3WK3P1-1A0N..................124
DAJTE3WK3P1-OL4 ...................126
DAJTE3WK3P5 ......................128
DAJTE3WK3P5-1A0N..................124
DAJTE3WK3P5-OL4...................126
DAJTE3WK3P6 ......................128
DAJTE3WK3P6-1A0N..................124
DAJTE3WK3P6-OL4...................126
DAJTE3WK3P9 ......................128
DAJTE3WK3P9-1A0N..................124
DAJTE3WK3P9-OL4...................126
DAJTE3WK3S1.......................129
DAJTE3WK3S1-1A0N..................125
DAJTE3WK3S1-OL4 ...................127
DAJTE3WK3S5 ......................129
DAJTE3WK3S5-1AON .................125
DAJTE3WK3S5-OL4...................127
DAJTE3WK3S6 ......................129
DAJTE3WK3S6-1A0N..................125
DAJTE3WK3S6-OL4...................127
DAJTE3WK3S9 ......................129
DAJTE3WK3S9-1A0N..................125
DAJTE3WK3S9-OL4...................127
DAJTX15P ..........................122
DAJTX15S* .........................123
DAJTX3W3KP1-1A0N..................124
DAJTX3W3P1........................128
DAJTX3W3P1-1A0N...................124
DAJTX3W3P1-OL4 ....................126
DAJTX3W3P5 .......................128
DAJTX3W3P5-1A0N ...................124
DAJTX3W3P5-OL4....................126
DAJTX3W3P6 .......................128
DAJTX3W3P6-1A0N ...................124
DAJTX3W3P6-OL4....................126
DAJTX3W3P9 .......................128
DAJTX3W3P9-1A0N ...................124
DAJTX3W3P9-OL4....................126
DAJTX3W3S1........................129
DAJTX3W3S1-1A0N...................125
DAJTX3W3S1-OL4 ....................127
DAJTX3W3S5 .......................129
DAJTX3W3S5-1AON...................125
DAJTX3W3S5-OL4....................127
DAJTX3W3S6 .......................129
DAJTX3W3S6-1A0N ...................125
DAJTX3W3S6-OL4....................127
DAJTX3W3S9 .......................129
DAJTX3W3S9-1A0N ...................125
DAJTX3W3S9-OL4....................127
DAJTX3WK3P1.......................128
DAJTX3WK3P1-OL4 ...................126
DAJTX3WK3P5 ......................128
DAJTX3WK3P5-1A0N..................124
DAJTX3WK3P5-OL4...................126
DAJTX3WK3P6 ......................128
DAJTX3WK3P6-1A0N..................124
DAJTX3WK3P6-OL4...................126
DAJTX3WK3P9 ......................128
DAJTX3WK3P9-1A0N..................124
DAJTX3WK3P9-OL4...................126
DAJTX3WK3S1.......................129
DAJTX3WK3S1-1A0N..................125
DAJTX3WK3S1-OL4 ...................127
DAJTX3WK3S5 ......................129
DAJTX3WK3S5-1AON .................125
DAJTX3WK3S5-OL4...................127
DAJTX3WK3S6 ......................129
DAJTX3WK3S6-1A0N..................125
DAJTX3WK3S6-OL4...................127
DAJTX3WK3S9 ......................129
DAJTX3WK3S9-1A0N..................125
DAJTX3WK3S9-OL4...................127
DAM-11W1P-1A0N-K87 .................74
DAM-11W1P-1A7N-K87 .................74
DAM-11W1P-NMB-76 ..................195
DAM-11W1P-NMB-77 ..................195
DAM-11W1P-NMC-76..................195
DAM-11W1P-NMC-77..................195
DAM-11W1P-OL2-K87 ..................76
DAM-11W1P-OL4-K87 ..................76
DAM-11W1S-1A0N-A197 ................75
DAM-11W1S-1A7N-A197 ................75
DAM-11W1S-NMB-76 ..................195
DAM-11W1S-NMB-77 ..................195
DAM-11W1S-NMC-76..................195
DAM-11W1S-NMC-77..................195
DAM-11W1S-OL2-A197 .................77
DAM-11W1S-OL4-A197 .................77
DAM-15S-NMB-76 ....................195
DAM-15S-NMC-76 ....................195
DAM-3W3P-1A0N-K87 .................74
DAM-3W3P-1A7N-K87 .................74
DAM-3W3P-NMB-76 ..................195
DAM-3W3P-NMC-76 ..................195
DAM-3W3P-OL2-K87 ..................76
DAM-3W3P-OL4-K87 ..................76
DAM-3W3S-1A0N-A197.................75
DAM-3W3S-1A7N-A197.................75
DAM-3W3S-NMC-76 ..................195
DAM-3W3S-OL2-A197..................77
DAM-3W3S-OL4-A197..................77
DAM-3WK3P-1A0N-K87 ................74
DAM-3WK3P-1A7N-K87 ................74
DAM-3WK3P-OL2-K87 .................76
DAM-3WK3P-OL4-K87 .................76
DAM-3WK3S-1A0N-A197................75
DAM-3WK3S-1A7N-A197................75
DAM-3WK3S-OL2-A197 ................77
DAM-3WK3S-OL4-A197 ................77
DAM-7W2P-1A0N-K87 .................74
DAM-7W2P-1A7N-K87 .................74
DAM-7W2P-NMB-76 ..................195
DAM-7W2P-NMB-77 ..................195
DAM-7W2P-NMC-76 ..................195
DAM-7W2P-OL2-K87 ..................76
DAM-7W2P-OL4-K87 ..................76
DAM-7W2S-1A0N-A197.................75
DAM-7W2S-1A7N-A197.................75
DAM-7W2S-NMB-77 ..................195
DAM-7W2S-NMC-76 ..................195
DAM-7W2S-OL2-A197..................77
DAM-7W2S-OL4-A197..................77
DAM11W1P1A0NNMBK52...............195
DAM11W1P1A7NNMBK52...............195
DAM11W1P1A9NNMBK52...............195
DAM11W1PF179ANMBK52 ..............195
DAM11W1PK87 .......................78
DAM11W1PNM.......................188
DAM11W1PNMBK52...................195
DAM11W1POL3NMBK52 ...............195
DAM11W1S1A0NNMBK52...............195
DAM11W1S1A7NNMBK52...............195
DAM11W1S1A9NNMBK52...............195
DAM11W1SA197 ......................79
DAM11W1SF179ANMBK52 ..............195
DAM11W1SNM.......................189
DAM11W1SNMBK52...................195
DAM11W1SOL3NMBK52 ...............195
DAM15P............................140
DAM15P1A0NNMBK52.................195
DAM15P1A7NNMBK52.................195
DAM15P1A9NNMBK52.................195
DAM15PA ..........................132
DAM15PB ..........................136
DAM15PC ..........................134
DAM15PD ..........................132
DAM15PE...........................136
DAM15PF...........................134
DAM15PF179........................138
DAM15PF179A.......................138
DAM15PF179ANMBK52 ................195
DAM15PG ..........................132
DAM15PH ..........................136
DAM15PK ..........................134
DAM15PL...........................132
DAM15PLNM ........................174
DAM15PM..........................136
DAM15PNM .........................180
DAM15PNM*1A7N ....................178
DAM15PNM*1A9N ....................178
DAM15PNM*1AON....................176
DAM15PNMB76 ......................195
DAM15PNMB77 ......................195
DAM15PNMBK52 .....................195
DAM15PNMC76 ......................195
DAM15PNMC77 ......................195
DAM15POL3NM ......................172
DAM15POL3NMBK52..................195
DAM15PP...........................134
DAM15PR ..........................134
DAM15PS ..........................132
DAM15PW..........................132
DAM15PX...........................136
DAM15PZ...........................136
DAM15S............................141
DAM15S1A0NNMBK52.................195
DAM15S1A7NNMBK52.................195
DAM15S1A9NNMBK52.................195
DAM15SA ..........................133
DAM15SB ..........................137
DAM15SC ..........................135
DAM15SD ..........................133
DAM15SE...........................137
DAM15SF...........................135
DAM15SF179........................139
DAM15SF179A.......................139
DAM15SF179ANMBK52 ................195
DAM15SG ..........................133
DAM15SH ..........................137
DAM15SK ..........................135
DAM15SL...........................133
DAM15SLNM ........................175
DAM15SM..........................137
DAM15SNM .........................181
DAM15SNM*1A7N ....................179
DAM15SNM*1A9N ....................179
DAM15SNM*1AON....................177
DAM15SNMB77 ......................195
DAM15SNMBK52 .....................195
DAM15SOL3NM......................173
DAM15SOL3NMBK52..................195
DAM15SP ..........................135
DAM15SR ..........................135
DAM15SS ..........................133
DAM15SW..........................133
DAM15SX...........................137
DAM15SZ...........................137
DAM3W3P-NMC-77...................195
DAM3W3PK87........................78
DAM3W3PNM .......................188
DAM3W3PNMBK52 ...................195
DAM3W3PNMC76 ....................195
DAM3W3POL3NMBK52 ................195
DAM3W3S-NMC-76...................195
DAM3W3SA197.......................79
DAM3W3SNM .......................189
DAM3W3SNMB76 ....................195
DAM3W3SNMB77 ....................195
DAM3W3SNMBK52 ...................195
DAM3WK3PK87 ......................78
DAM3WK3PNM ......................188
DAM3WK3SA197......................79
DAM3WK3SNM ......................189
DAM53512-1405 ......................49
DAM7W2P1A0NNMBK52 ...............195
DAM7W2P1A7NNMBK52 ...............195
DAM7W2P1A9NNMBK52 ...............195
DAM7W2PF179ANMBK52 ..............195
DAM7W2PK87........................78
DAM7W2PNM .......................188
DAM7W2PNMBK52 ...................195
DAM7W2POL3NMBK52 ................195
DAM7W2S-NMC-77...................195
DAM7W2S1A0NNMBK52 ...............195
DAM7W2S1A7NNMBK52 ...............195
DAM7W2S1A9NNMBK52 ...............195
DAM7W2SA197.......................79
DAM7W2SF179ANMBK52 ..............195
DAM7W2SNM .......................189
DAM7W2SNMBK52 ...................195
DAM7W2SOL3NMBK52 ................195
DAMA15PNM ........................182
DAMA15PNMBK52....................195
DAMA15SNM ........................183
DAMA15SNMBK52....................195
DAMA26PNM........................184
DAMA26SNM........................185
DAMAY15PNM .......................182
DAMAY15SNM .......................183
DAMAY26PNM.......................184
DAMAY26SNM.......................185
DAMB-11W1S-NMB-77.................195
DAMB-15S-NMC-77 ...................195
DAMB-7W2S-NMB-76 .................195
DAMB-7W2S-NMB-77 .................195
DAMB15SNMB77 .....................195
DAMB15SNMC76 .....................195
DAMC11C1PJK87......................44
DAMC11C1PVK87 .....................50
DAMC11C1SJA197.....................45
DAMC11C1SVA197.....................51
DAMC11H1PJK87......................60
DAMC11H1SJA197.....................61
DAMC11P1PVK87 .....................64
DAMC11P1SVA197.....................65
DAMC15PJK87........................16
DAMC15SJA197.......................17
DAMC3C3PJK87 ......................44
DAMC3C3PVK87 ......................50
DAMC3C3SJA197 .....................45
DAMC3C3SVA197 .....................51
DAMC3CK3PJK87TM ..................44
DAMC3CK3PVK87TM ..................50
DAMC3CK3SJA197TM..................45
DAMC3CK3SVA197TM..................51
DAMC3H3PJK87 ......................60
DAMC3H3SJA197 .....................61
DAMC3HK3PJK87TM ..................60
DAMC3HK3SJA197TM ..................61
DAMC3P3PVK87 ......................64
DAMC3P3SVA197 .....................65
DAMC3PK3PVK87TM ..................64
DAMC3PK3SVA197TM .................65
DAMC7C2PJK87 ......................44
DAMC7C2PVK87 ......................50
DAMC7C2SJA197 .....................45
DAMC7C2SVA197 .....................51
DAMC7H2PJK87 ......................60
DAMC7H2SJA197 .....................61
DAMC7P2PVK87 ......................64
DAMC7P2SVA197 .....................65
DAMD11C1PJK87......................44
DAMD11C1PVK87 .....................50
DAMD11C1SJA197.....................45
DAMD11C1SVA197.....................51
DAMD11H1PJK87......................60
DAMD11H1SJA197.....................61
DAMD11P1PVK87 .....................64
DAMD11P1SVA197.....................65
DAMD15PJK87 .......................16
DAMD15SJA197.......................17
DAMD3C3PJK87 ......................44
DAMD3C3PVK87 ......................50
DAMD3C3SJA197 .....................45
DAMD3C3SVA197 .....................51
DAMD3CK3PJK87TM ..................44
DAMD3CK3PVK87TM ..................50
DAMD3CK3SJA197TM..................45
DAMD3CK3SVA197TM..................51
DAMD3H3PJK87 ......................60
DAMD3H3SJA197 .....................61
DAMD3HK3PJK87TM ..................60
DAMD3HK3SJA197TM ..................61
R e a d e r ’ s R e s o u r c e
284
Dimensions are shown in mm (inch)
Dimensions subject to change
D Subminiature Part Number Index
Part Number Page Part Number Page Part Number Page Part Number Page
DAMD3P3PVK87 ......................64
DAMD3P3SVA197 .....................65
DAMD3PK3PVK87TM ..................64
DAMD3PK3SVA197TM .................65
DAMD7C2PJK87 ......................44
DAMD7C2PVK87 ......................50
DAMD7C2SJA197 .....................45
DAMD7C2SVA197 .....................51
DAMD7H2PJK87 ......................60
DAMD7H2SJA197 .....................61
DAMD7P2PVK87 ......................64
DAMD7P2SVA197 .....................65
DAME11W1PK87 ......................78
DAME11W1SA197 .....................79
DAME15P...........................140
DAME15S...........................141
DAME3W3PK87.......................78
DAME3W3SA197 ......................79
DAME3WK3PK87 .....................78
DAME3WK3SA197.....................79
DAME7W2PK87.......................78
DAME7W2SA197 ......................79
DAMG11C1PJK87......................44
DAMG11C1PVK87 .....................50
DAMG11C1SJA197.....................45
DAMG11C1SVA197.....................51
DAMG11H1PJK87 .....................60
DAMG11H1SJA197.....................61
DAMG11P1PVK87 .....................64
DAMG11P1SVA197.....................65
DAMG15PJK87 .......................16
DAMG15SJA197.......................17
DAMG3C3PJK87 ......................44
DAMG3C3PVK87 ......................50
DAMG3C3SJA197 .....................45
DAMG3C3SVA197 .....................51
DAMG3CK3PJK87TM ..................44
DAMG3CK3PVK87TM ..................50
DAMG3CK3SJA197TM..................45
DAMG3CK3SVA197TM..................51
DAMG3H3PJK87 ......................60
DAMG3H3SJA197 .....................61
DAMG3HK3PJK87TM ..................60
DAMG3HK3SJA197TM ..................61
DAMG3P3PVK87 ......................64
DAMG3P3SVA197 .....................65
DAMG3PK3PVK87TM ..................64
DAMG3PK3SVA197TM .................65
DAMG7C2PJK87 ......................44
DAMG7C2PVK87 ......................50
DAMG7C2SJA197 .....................45
DAMG7C2SVA197 .....................51
DAMG7H2PJK87 ......................60
DAMG7H2SJA197 .....................61
DAMG7P2PVK87 ......................64
DAMG7P2SVA197 .....................65
DAMM11W1P ........................166
DAMM11W1S ........................167
DAMM15P..........................140
DAMM15PA.........................132
DAMM15PB.........................136
DAMM15PC.........................134
DAMM15PD.........................132
DAMM15PE.........................136
DAMM15PF .........................134
DAMM15PF179 ......................138
DAMM15PF179A .....................138
DAMM15PG.........................132
DAMM15PH.........................136
DAMM15PK.........................134
DAMM15PL.........................132
DAMM15PM.........................136
DAMM15PP.........................134
DAMM15PR.........................134
DAMM15PS.........................132
DAMM15PW.........................132
DAMM15PX.........................136
DAMM15PZ .........................136
DAMM15S ..........................141
DAMM15SA.........................133
DAMM15SB.........................137
DAMM15SC.........................135
DAMM15SD.........................133
DAMM15SE.........................137
DAMM15SF .........................135
DAMM15SF179 ......................139
DAMM15SF179A .....................139
DAMM15SG.........................133
DAMM15SH.........................137
DAMM15SK.........................135
DAMM15SL.........................133
DAMM15SM.........................137
DAMM15SP.........................135
DAMM15SR.........................135
DAMM15SS.........................133
DAMM15SW ........................133
DAMM15SX.........................137
DAMM15SZ .........................137
DAMM3W3P ........................166
DAMM3W3S ........................167
DAMM3WK3P .......................166
DAMM3WK3S .......................167
DAMM7W2P ........................166
DAMM7W2S ........................167
DAMMC11C1PJ ......................146
DAMMC11C1SJ ......................147
DAMMC11H1PJ ......................154
DAMMC11H1SJ ......................155
DAMMC3C3PJ .......................146
DAMMC3C3SJ .......................147
DAMMC3CK3PJ......................146
DAMMC3CK3SJ......................147
DAMMC3H3PJ .......................154
DAMMC3H3SJ .......................155
DAMMC3HK3PJ......................154
DAMMC3HK3SJ......................155
DAMMC7C2PJ .......................146
DAMMC7C2SJ .......................147
DAMMC7H2PJ .......................154
DAMMC7H2SJ .......................155
DAMMD11C1PJ ......................146
DAMMD11C1SJ ......................147
DAMMD11H1PJ ......................154
DAMMD11H1SJ ......................155
DAMMD3C3PJ .......................146
DAMMD3C3SJ .......................147
DAMMD3CK3PJ......................146
DAMMD3CK3SJ......................147
DAMMD3H3PJ.......................154
DAMMD3H3SJ.......................155
DAMMD3HK3PJ......................154
DAMMD3HK3SJ......................155
DAMMD7C2PJ .......................146
DAMMD7C2SJ .......................147
DAMMD7H2PJ.......................154
DAMMD7H2SJ.......................155
DAMME11W1P .......................166
DAMME11W1S .......................167
DAMME15P .........................140
DAMME15S .........................141
DAMME3W3P .......................166
DAMME3W3S .......................167
DAMME3WK3P ......................166
DAMME3WK3S ......................167
DAMME7W2P .......................166
DAMME7W2S .......................167
DAMMG11C1PJ ......................146
DAMMG11C1SJ ......................147
DAMMG11H1PJ ......................154
DAMMG11H1SJ ......................155
DAMMG3C3PJ .......................146
DAMMG3C3SJ.......................147
DAMMG3CK3PJ......................146
DAMMG3CK3SJ......................147
DAMMG3H3PJ.......................154
DAMMG3H3SJ.......................155
DAMMG3HK3PJ......................154
DAMMG3HK3SJ......................155
DAMMG7C2PJ .......................146
DAMMG7C2SJ.......................147
DAMMG7H2PJ.......................154
DAMMG7H2SJ.......................155
DAMMN11C1PN ......................150
DAMMN11C1SN ......................151
DAMMN11H1PN ......................158
DAMMN11H1SN ......................159
DAMMN11V1PN ......................162
DAMMN11V1SN ......................163
DAMMN3C3PN ......................150
DAMMN3C3SN.......................151
DAMMN3CK3PN .....................150
DAMMN3CK3SN......................151
DAMMN3H3PN ......................158
DAMMN3H3SN ......................159
DAMMN3HK3PN .....................158
DAMMN3HK3SN .....................159
DAMMN3V3PN.......................162
DAMMN3V3SN.......................163
DAMMN3VK3PN .....................162
DAMMN3VK3SN .....................163
DAMMN7C2PN ......................150
DAMMN7C2SN.......................151
DAMMN7H2PN ......................158
DAMMN7H2SN ......................159
DAMMN7V2PN.......................162
DAMMN7V2SN.......................163
DAMMP11C1PJ ......................146
DAMMP11C1SJ ......................147
DAMMP11H1PJ ......................154
DAMMP11H1SJ ......................155
DAMMP3C3PJ .......................146
DAMMP3C3SJ .......................147
DAMMP3CK3PJ ......................146
DAMMP3CK3SJ ......................147
DAMMP3H3PJ .......................154
DAMMP3H3SJ .......................155
DAMMP3HK3PJ ......................154
DAMMP3HK3SJ......................155
DAMMP7C2PJ .......................146
DAMMP7C2SJ .......................147
DAMMP7H2PJ .......................154
DAMMP7H2SJ .......................155
DAMMV11C1PN ......................150
DAMMV11C1SN ......................151
DAMMV11H1PN ......................158
DAMMV11H1SN ......................159
DAMMV11V1PN ......................162
DAMMV11V1SN ......................163
DAMMV3C3PN.......................150
DAMMV3C3SN .......................151
DAMMV3CK3PN .....................150
DAMMV3CK3SN......................151
DAMMV3H3PN.......................158
DAMMV3H3SN ......................159
DAMMV3HK3PN .....................158
DAMMV3HK3SN .....................159
DAMMV3V3PN.......................162
DAMMV3V3SN.......................163
DAMMV3VK3PN......................162
DAMMV3VK3SN......................163
DAMMV7C2PN.......................150
DAMMV7C2SN .......................151
DAMMV7H2PN.......................158
DAMMV7H2SN ......................159
DAMMV7V2PN.......................162
DAMMV7V2SN.......................163
DAMMY11W1P .......................166
DAMMY11W1S .......................167
DAMMY15P .........................140
DAMMY15S .........................141
DAMMY3W3P .......................166
DAMMY3W3S .......................167
DAMMY3WK3P ......................166
DAMMY3WK3S ......................167
DAMMY7W2P .......................166
DAMMY7W2S .......................167
DAMMZ11C1PN ......................150
DAMMZ11C1SN.......................151
DAMMZ11H1PN ......................158
DAMMZ11H1SN ......................159
DAMMZ11V1PN ......................162
DAMMZ11V1SN ......................163
DAMMZ3C3PN.......................150
DAMMZ3C3SN .......................151
DAMMZ3CK3PN......................150
DAMMZ3CK3SN ......................151
DAMMZ3H3PN.......................158
DAMMZ3H3SN.......................159
DAMMZ3HK3PN......................158
DAMMZ3HK3SN......................159
DAMMZ3V3PN .......................162
DAMMZ3V3SN .......................163
DAMMZ3VK3PN......................162
DAMMZ3VK3SN......................163
DAMMZ7C2PN.......................150
DAMMZ7C2SN .......................151
DAMMZ7H2PN.......................158
DAMMZ7H2SN.......................159
DAMMZ7V2PN .......................162
DAMMZ7V2SN .......................163
DAMN11C1PNK87 .....................52
DAMN11C1PYK87 .....................56
DAMN11C1SNA197 ....................53
DAMN11C1SYA197.....................57
DAMN11H1PNK87 .....................66
DAMN11H1PYK87 .....................70
DAMN11H1SNA197 ....................67
DAMN11H1SYA197.....................71
DAMN15PNK87 ........................6
DAMN15SNA197.......................7
DAMN3C3PNK87......................52
DAMN3C3PYK87 ......................56
DAMN3C3SNA197 .....................53
DAMN3C3SYA197 .....................57
DAMN3CK3PNK87TM ..................52
DAMN3CK3PYK87TM ..................56
DAMN3CK3SNA197TM .................53
DAMN3CK3SYA197TM .................57
DAMN3H3PNK87......................66
DAMN3H3PYK87 ......................70
DAMN3H3SNA197 .....................67
DAMN3H3SYA197 .....................71
DAMN3HK3PNK87TM ..................66
DAMN3HK3PYK87TM ..................70
DAMN3HK3SNA197TM .................67
DAMN3HK3SYA197TM..................71
DAMN7C2PNK87......................52
DAMN7C2PYK87 ......................56
DAMN7C2SNA197 .....................53
DAMN7C2SYA197 .....................57
DAMN7H2PNK87......................66
DAMN7H2PYK87 ......................70
DAMN7H2SNA197 .....................67
DAMN7H2SYA197 .....................71
DAMP11C1PJK87......................44
DAMP11C1PVK87 .....................50
DAMP11C1SJA197.....................45
DAMP11C1SVA197.....................51
DAMP11H1PJK87......................60
DAMP11H1SJA197.....................61
DAMP11P1PVK87......................64
DAMP11P1SVA197.....................65
DAMP15PJK87........................16
DAMP15SJA197.......................17
DAMP3C3PJK87 ......................44
DAMP3C3PVK87 ......................50
DAMP3C3SJA197 .....................45
DAMP3C3SVA197 .....................51
DAMP3CK3PJK87TM...................44
DAMP3CK3PVK87TM ..................50
DAMP3CK3SJA197TM ..................45
DAMP3CK3SVA197TM..................51
DAMP3H3PJK87 ......................60
DAMP3H3SJA197 .....................61
DAMP3HK3PJK87TM ..................60
DAMP3HK3SJA197TM ..................61
DAMP3P3PVK87 ......................64
DAMP3P3SVA197 .....................65
DAMP3PK3PVK87TM ..................64
DAMP3PK3SVA197TM..................65
DAMP7C2PJK87 ......................44
DAMP7C2PVK87 ......................50
DAMP7C2SJA197 .....................45
DAMP7C2SVA197 .....................51
DAMP7H2PJK87 ......................60
DAMP7H2SJA197 .....................61
DAMP7P2PVK87 ......................64
DAMP7P2SVA197 .....................65
DAMV11C1PNK87 .....................52
DAMV11C1PYK87......................56
DAMV11C1SNA197.....................53
DAMV11C1SYA197.....................57
R e a d e r ’ s R e s o u r c e
285
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
DAMV11H1PNK87 .....................66
DAMV11H1PYK87 .....................70
DAMV11H1SNA197 ....................67
DAMV11H1SYA197.....................71
DAMV15PNK87 ........................6
DAMV15SNA197 .......................7
DAMV3C3PNK87 ......................52
DAMV3C3PYK87 ......................56
DAMV3C3SNA197 .....................53
DAMV3C3SYA197 .....................57
DAMV3CK3PNK87TM ..................52
DAMV3CK3PYK87TM ..................56
DAMV3CK3SNA197TM .................53
DAMV3CK3SYA197TM..................57
DAMV3H3PNK87......................66
DAMV3H3PYK87 ......................70
DAMV3H3SNA197 .....................67
DAMV3H3SYA197 .....................71
DAMV3HK3PNK87TM ..................66
DAMV3HK3PYK87TM ..................70
DAMV3HK3SNA197TM .................67
DAMV3HK3SYA197TM ..................71
DAMV7C2PNK87 ......................52
DAMV7C2PYK87 ......................56
DAMV7C2SNA197 .....................53
DAMV7C2SYA197 .....................57
DAMV7H2PNK87......................66
DAMV7H2PYK87 ......................70
DAMV7H2SNA197 .....................67
DAMV7H2SYA197 .....................71
DAMY11W1PK87 ......................78
DAMY11W1PNM......................188
DAMY11W1SA197 .....................79
DAMY11W1SNM......................189
DAMY15P...........................140
DAMY15PNM ........................180
DAMY15PNM*1AON...................176
DAMY15POL3NM .....................172
DAMY15S...........................141
DAMY15SNM ........................181
DAMY15SNM*1AON...................177
DAMY15SOL3NM .....................173
DAMY3W3PK87.......................78
DAMY3W3PNM ......................188
DAMY3W3SA197......................79
DAMY3W3SNM ......................189
DAMY3WK3PK87 .....................78
DAMY3WK3PNM .....................188
DAMY3WK3SA197.....................79
DAMY3WK3SNM .....................189
DAMY7W2PK87.......................78
DAMY7W2PNM ......................188
DAMY7W2SA197......................79
DAMY7W2SNM ......................189
DAMZ11C1PNK87......................52
DAMZ11C1PYK87......................56
DAMZ11C1SNA197.....................53
DAMZ11C1SYA197.....................57
DAMZ11H1PNK87 .....................66
DAMZ11H1PYK87......................70
DAMZ11H1SNA197.....................67
DAMZ11H1SYA197.....................71
DAMZ15PNK87 ........................6
DAMZ15SNA197 .......................7
DAMZ3C3PNK87 ......................52
DAMZ3C3PYK87 ......................56
DAMZ3C3SNA197 .....................53
DAMZ3C3SYA197 .....................57
DAMZ3CK3PNK87TM ..................52
DAMZ3CK3PYK87TM...................56
DAMZ3CK3SNA197TM..................53
DAMZ3CK3SYA197TM ..................57
DAMZ3H3PNK87 ......................66
DAMZ3H3PYK87 ......................70
DAMZ3H3SNA197 .....................67
DAMZ3H3SYA197 .....................71
DAMZ3HK3PNK87TM ..................66
DAMZ3HK3PYK87TM ..................70
DAMZ3HK3SNA197TM..................67
DAMZ3HK3SYA197TM ..................71
DAMZ7C2PNK87 ......................52
DAMZ7C2PYK87 ......................56
DAMZ7C2SNA197 .....................53
DAMZ7C2SYA197 .....................57
DAMZ7H2PNK87 ......................66
DAMZ7H2PYK87 ......................70
DAMZ7H2SNA197 .....................67
DAMZ7H2SYA197 .....................71
DANG15P-P1 ..........................4
DANG15S-P1 ..........................5
DANGE15P-P1 .........................4
DANGE15S-P1 .........................5
DANGL15P-P1 .........................4
DANGL15S-P1 .........................5
DANGX15P-P1 .........................4
DANGX15S-P1 .........................5
DANGZ15P-P1 .........................4
DANGZ15S-P1 .........................5
DAW15P* ...........................38
DAW15P*G ..........................38
DAW15S* ...........................39
DAW15S*G ..........................39
DAWE15P* ..........................38
DAWE15P*G .........................38
DAWE15S* ..........................39
DAWE15S*G .........................39
DAX15P-0L2-K87-146 ..................10
DAX15PK87 ..........................32
DAX15S-0L2-A197-146..................11
DAX15SA197.........................33
DB-59-20 .......................195, 218
DB-60-20 .......................195, 218
DB111807-1 .........................216
DB111807-5 .........................216
DB111811...........................216
DB111811-2 .........................216
DB111949-43.........................48
DB115339-2 ........................207
DB115339-22 .......................205
DB115386-102A ......................195
DB115386-3B .......................207
DB121073-151 .......................200
DB121073-51........................200
DB19678-168 ....................193, 1 95
DB19678-171 ........................195
DB19678-175........................195
DB19678-2 .........................204
DB19977-2 .........................204
DB19977-43.....................193, 1 95
DB20962 ...........................203
DB20962-18 ........................192
DB22254 ...........................214
DB22255 ...........................215
DB24659 ...........................203
DB24659-15.....................192, 1 95
DB25P-0L2-K87.......................10
DB25P-1A5N-K87 .....................26
DB25P-1A6N-K87 .....................26
DB25P-1A7N-K87 .....................22
DB25P-1A8N-K87 .....................22
DB25P-1A9N-K87 .....................22
DB25P-1ADN-K87 .....................24
DB25P-1AFN-K87 .....................22
DB25P-1AJN-K87 .....................24
DB25P-1AON-K87 .....................20
DB25P-1ATN-K87 .....................26
DB25P-1AUN-K87 .....................26
DB25P-1AVN-K87 .....................24
DB25P-1AWN-K87.....................24
DB25P-F179A-K87 .....................12
DB25PK87...........................32
DB25S-0L2-A197 ......................11
DB25S-1A5N-A197 ....................27
DB25S-1A6N-A197 ....................27
DB25S-1A7N-A197 ....................23
DB25S-1A8N-A197 ....................23
DB25S-1A9N-A197 ....................23
DB25S-1ADN-A197 ....................25
DB25S-1AFN-A197.....................23
DB25S-1AJN-A197.....................25
DB25S-1AON-A197 ....................21
DB25S-1ATN-A197 ....................27
DB25S-1AUN-A197 ....................27
DB25S-1AVN-A197 ....................25
DB25S-1AWN-A197 ....................25
DB25S-F179A-A197 ....................13
DB25SA197 ..........................33
DB50906-1 .........................218
DB51212 ...........................206
DB51213 ...........................206
DB51221-1 ..........................210
DB51226-1B ........................206
DB53750-2 .........................218
DBA13W3PK87F0 .....................80
DBA13W3SA197F0.....................81
DBA17W2PK87F0 .....................80
DBA17W2SA197F0.....................81
DBA21W1PK87F0 .....................80
DBA21W1SA197F0 .....................81
DBA25PK87FO .......................36
DBA25SA197FO.......................37
DBA5W5PK87F0 ......................80
DBA5W5SA197F0 .....................81
DBA9W4PK87F0 ......................80
DBA9W4SA197F0 .....................81
DBBS-25 ...........................205
DBBU111511.........................216
DBE25P-0L2-K87-146 ..................10
DBE25PK87..........................32
DBE25S-0L2-A197-146 .................11
DBE25SA197 .........................33
DBJK25P*-1A0N .....................110
DBJK25P*-1A5N .....................118
DBJK25P*-1A6N .....................118
DBJK25P*-1A7N .....................114
DBJK25P*-1A8N .....................114
DBJK25P*-1A9N .....................114
DBJK25P*-1ADN .....................116
DBJK25P*-1AFN......................114
DBJK25P*-1AGN .....................116
DBJK25P*-1AHN .....................114
DBJK25P*-1AJN......................116
DBJK25P*-1APN .....................118
DBJK25P*-1ATN .....................118
DBJK25P*-1AUN .....................118
DBJK25P*-1AVN .....................116
DBJK25P*-1AWN .....................116
DBJK25P*-1U0N .....................108
DBJK25P*-1U7N .....................112
DBJK25P*-1U7N-146 ..................112
DBJK25P*-OL4 ......................120
DBJK25S*-1A0N......................111
DBJK25S*-1A5N .....................119
DBJK25S*-1A6N .....................119
DBJK25S*-1A7N .....................115
DBJK25S*-1A8N .....................115
DBJK25S*-1A9N .....................115
DBJK25S*-1ADN .....................117
DBJK25S*-1AFN......................115
DBJK25S*-1AGN .....................117
DBJK25S*-1AHN .....................115
DBJK25S*-1AJN......................117
DBJK25S*-1APN .....................119
DBJK25S*-1ATN .....................119
DBJK25S*-1AUN .....................119
DBJK25S*-1AVN .....................117
DBJK25S*-1AWN .....................117
DBJK25S*-1U0N .....................109
DBJK25S*-1U7N .....................113
DBJK25S*-1U7N-146 ..................113
DBJK25S*-OL4 ......................121
DBJKE25P*-1A0N ....................110
DBJKE25P*-1U0N ....................108
DBJKE25P*-OL4 .....................120
DBJKE25P*-OL4-146 ..................120
DBJKE25S*-1A0N.....................111
DBJKE25S*-1U0N ....................109
DBJKE25S*-OL4 .....................121
DBJKE25S*-OL4-146 ..................121
DBJKX25P*-1A0N ....................110
DBJKX25P*-OL4 .....................120
DBJKX25P*-OL4-146 ..................120
DBJKX25S*-1A0N.....................111
DBJKX25S*-OL4 .....................121
DBJKX25S*-OL4-146 ..................121
DBJT25P ...........................122
DBJT25S* ..........................123
DBJTE25P ..........................122
DBJTE25S* .........................123
DBJTX25P ..........................122
DBJTX25S* .........................123
DBM-13W3P-1A0N-K87.................74
DBM-13W3P-1A7N-K87.................74
DBM-13W3P-NMB-76 .................195
DBM-13W3P-NMC-76 .................195
DBM-13W3P-OL2-K87..................76
DBM-13W3P-OL4-K87..................76
DBM-13W3S-1A0N-A197 ................75
DBM-13W3S-1A7N-A197 ................75
DBM-13W3S-NMB-77 .................195
DBM-13W3S-NMC-76 .................195
DBM-13W3S-OL2-A197 .................77
DBM-13W3S-OL4-A197 .................77
DBM-17W2P-1A0N-K87.................74
DBM-17W2P-1A7N-K87.................74
DBM-17W2P-NMB-76 .................195
DBM-17W2P-NMC-76 .................195
DBM-17W2P-OL2-K87..................76
DBM-17W2P-OL4-K87..................76
DBM-17W2S-1A0N-A197 ................75
DBM-17W2S-1A7N-A197 ................75
DBM-17W2S-NMC-76 .................195
DBM-17W2S-NMC-77 .................195
DBM-17W2S-OL2-A197 .................77
DBM-17W2S-OL4-A197 .................77
DBM-21W1P-1A0N-K87 .................74
DBM-21W1P-1A7N-K87 .................74
DBM-21W1P-NMB-76..................195
DBM-21W1P-NMB-77..................195
DBM-21W1P-OL2-K87 ..................76
DBM-21W1P-OL4-K87 ..................76
DBM-21W1S-1A0N-A197 ................75
DBM-21W1S-1A7N-A197 ................75
DBM-21W1S-NMB-76..................195
DBM-21W1S-NMB-77..................195
DBM-21W1S-NMC-76 .................195
DBM-21W1S-OL2-A197 .................77
DBM-21W1S-OL4-A197 .................77
DBM-25S-NMB-76....................195
DBM-25S-NMC-76....................195
DBM-25S-NMC-77....................195
DBM-5W5P-1A0N-K87 .................74
DBM-5W5P-1A7N-K87 .................74
DBM-5W5P-NMB-76 ..................195
DBM-5W5P-NMC-76 ..................195
DBM-5W5P-NMC-77 ..................195
DBM-5W5P-OL2-K87 ..................76
DBM-5W5P-OL4-K87 ..................76
DBM-5W5S-1A0N-A197.................75
DBM-5W5S-1A7N-A197.................75
DBM-5W5S-NMB-76 ..................195
DBM-5W5S-NMB-77 ..................195
DBM-5W5S-NMC-76 ..................195
DBM-5W5S-NMC-77 ..................195
DBM-5W5S-OL2-A197..................77
DBM-5W5S-OL4-A197..................77
DBM-9W4P-1A0N-K87 .................74
DBM-9W4P-1A7N-K87 .................74
DBM-9W4P-NMB-77 ..................195
DBM-9W4P-NMC-76 ..................195
DBM-9W4P-OL2-K87 ..................76
DBM-9W4P-OL4-K87 ..................76
DBM-9W4S-1A0N-A197.................75
DBM-9W4S-1A7N-A197.................75
DBM-9W4S-NMB-77 ..................195
DBM-9W4S-NMC-76 ..................195
DBM-9W4S-OL2-A197..................77
DBM-9W4S-OL4-A197..................77
DBM13W3P-NMB-77 ..................195
DBM13W3P1A0NNMBK52 ..............195
DBM13W3P1A7NNMBK52 ..............195
DBM13W3P1A9NNMBK52 ..............195
DBM13W3PF179ANMBK52 .............195
DBM13W3PK87 .......................78
DBM13W3PNM ......................188
DBM13W3PNMBK52 ..................195
DBM13W3POL3NMBK52 ...............195
DBM13W3S-NMB-76 ..................195
DBM13W3S1A0NNMBK52 ..............195
DBM13W3S1A7NNMBK52 ..............195
DBM13W3S1A9NNMBK52 ..............195
DBM13W3SA197 ......................79
D Subminiature Part Number Index
R e a d e r ’ s R e s o u r c e
286
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
DBM13W3SF179ANMBK52 .............195
DBM13W3SNM ......................189
DBM13W3SNMBK52 ..................195
DBM13W3SOL3NMBK52 ...............195
DBM17W2P-NMC-77 ..................195
DBM17W2P1A0NNMBK52 ..............195
DBM17W2P1A7NNMBK52 ..............195
DBM17W2P1A9NNMBK52 ..............195
DBM17W2PF179ANMBK52 .............195
DBM17W2PK87 .......................78
DBM17W2PNM ......................188
DBM17W2PNMB77 ...................195
DBM17W2PNMBK52 ..................195
DBM17W2POL3NMBK52 ...............195
DBM17W2S1A0NNMBK52 ..............195
DBM17W2S1A7NNMBK52 ..............195
DBM17W2S1A9NNMBK52 ..............195
DBM17W2SA197 ......................79
DBM17W2SF179ANMBK52 .............195
DBM17W2SNM ......................189
DBM17W2SNMB77 ...................195
DBM17W2SNMBK52 ..................195
DBM17W2SOL3NMBK52 ...............195
DBM21W1P1A0NNMBK52 ..............195
DBM21W1P1A7NNMBK52 ..............195
DBM21W1P1A9NNMBK52 ..............195
DBM21W1PF179ANMBK52..............195
DBM21W1PK87 .......................78
DBM21W1PNM.......................188
DBM21W1PNMBK52 ..................195
DBM21W1POL3NMBK52 ...............195
DBM21W1S1A0NNMBK52 ..............195
DBM21W1S1A7NNMBK52 ..............195
DBM21W1S1A9NNMBK52 ..............195
DBM21W1SA197 ......................79
DBM21W1SF179ANMBK52..............195
DBM21W1SNM.......................189
DBM21W1SNMBK52 ..................195
DBM21W1SOL3NMBK52 ...............195
DBM25P ...........................140
DBM25P1A0NNMBK52.................195
DBM25P1A7NNMBK52.................195
DBM25P1A9NNMBK52.................195
DBM25PA ..........................132
DBM25PB ..........................136
DBM25PC ..........................134
DBM25PD ..........................132
DBM25PE ..........................136
DBM25PF...........................134
DBM25PF179 ........................138
DBM25PF179A.......................138
DBM25PF179ANMBK52 ................195
DBM25PG ..........................132
DBM25PH ..........................136
DBM25PK ..........................134
DBM25PL ..........................132
DBM25PLNM ........................174
DBM25PM ..........................136
DBM25PNM .........................180
DBM25PNM*1A7N....................178
DBM25PNM*1A9N....................178
DBM25PNM*1AON....................176
DBM25PNMB76......................195
DBM25PNMB77......................195
DBM25PNMBK52.....................195
DBM25PNMC76......................195
DBM25PNMC77......................195
DBM25POL3NM......................172
DBM25POL3NMBK52 .................195
DBM25PP ..........................134
DBM25PR ..........................134
DBM25PS ..........................132
DBM25PW ..........................132
DBM25PX ..........................136
DBM25PZ...........................136
DBM25S............................141
DBM25S1A0NNMBK52.................195
DBM25S1A7NNMBK52.................195
DBM25S1A9NNMBK52.................195
DBM25SA ..........................133
DBM25SB ..........................137
DBM25SC ..........................135
DBM25SD ..........................133
DBM25SE ..........................137
DBM25SF...........................135
DBM25SF179 ........................139
DBM25SF179A.......................139
DBM25SF179ANMBK52 ................195
DBM25SG ..........................133
DBM25SH ..........................137
DBM25SK ..........................135
DBM25SL ..........................133
DBM25SLNM ........................175
DBM25SM ..........................137
DBM25SNM .........................181
DBM25SNM*1A7N....................179
DBM25SNM*1A9N....................179
DBM25SNM*1AON....................177
DBM25SNMBK52.....................195
DBM25SOL3NM......................173
DBM25SOL3NMBK52 .................195
DBM25SP ..........................135
DBM25SR ..........................135
DBM25SS ..........................133
DBM25SW ..........................133
DBM25SX ..........................137
DBM25SZ ..........................137
DBM5W5PNMB77 ....................195
DBM5W5PNMBK52 ...................195
DBM5W5SA197 .......................79
DBM5W5SNM .......................189
DBM5W5SNMBK52 ...................195
DBM9W4P1A0NNMBK52 ...............195
DBM9W4P1A7NNMBK52 ...............195
DBM9W4P1A9NNMBK52 ...............195
DBM9W4PF179ANMBK52 ..............195
DBM9W4PK87........................78
DBM9W4PNM .......................188
DBM9W4PNMBK52 ...................195
DBM9W4POL3NMBK52 ................195
DBM9W4S1A0NNMBK52 ...............195
DBM9W4S1A7NNMBK52 ...............195
DBM9W4S1A9NNMBK52 ...............195
DBM9W4SA197 .......................79
DBM9W4SF179ANMBK52 ..............195
DBM9W4SNM .......................189
DBM9W4SNMBK52 ...................195
DBM9W4SOL3NMBK52 ................195
DBMA25PNM........................182
DBMA25PNMBK52 ...................195
DBMA25SNM........................183
DBMA25SNMBK52 ...................195
DBMA44PNM........................184
DBMA44SNM........................185
DBMAY25PNM.......................182
DBMAY25SNM.......................183
DBMAY44PNM.......................184
DBMAY44SNM.......................185
DBMB-17W2S-NMB-76 ................195
DBMB-25S-NMB-76...................195
DBMB-25S-NMB-77...................195
DBMB-25S-NMC-77...................195
DBMB25SNMC76.....................195
DBMC13C3PJK87 .....................44
DBMC13C3PVK87 .....................50
DBMC13C3SJA197 ....................45
DBMC13C3SVA197 ....................51
DBMC13H3PJK87 .....................60
DBMC13H3SJA197.....................61
DBMC13P3PVK87 .....................64
DBMC13P3SVA197 ....................65
DBMC17C2PJK87 .....................44
DBMC17C2PVK87 .....................50
DBMC17C2SJA197 ....................45
DBMC17C2SVA197 ....................51
DBMC17H2PJK87 .....................60
DBMC17H2SJA197.....................61
DBMC17P2PVK87 .....................64
DBMC17P2SVA197 ....................65
DBMC21C1PJK87 .....................44
DBMC21C1PVK87 .....................50
DBMC21C1SJA197.....................45
DBMC21C1SVA197.....................51
DBMC21H1PJK87 .....................60
DBMC21H1SJA197 .....................61
DBMC21P1PVK87 .....................64
DBMC21P1SVA197 ....................65
DBMC25PJK87 .......................16
DBMC25SJA197.......................17
DBMC5C5PJK87 ......................44
DBMC5C5PVK87 ......................50
DBMC5C5SJA197 .....................45
DBMC5C5SVA197 .....................51
DBMC5H5PJK87 ......................60
DBMC5H5SJA197 .....................61
DBMC5P5PVK87 ......................64
DBMC5P5SVA197 .....................65
DBMC9C4PJK87 ......................44
DBMC9C4PVK87 ......................50
DBMC9C4SJA197 .....................45
DBMC9C4SVA197 .....................51
DBMC9H4PJK87 ......................60
DBMC9H4SJA197 .....................61
DBMC9P4PVK87 ......................64
DBMC9P4SVA197 .....................65
DBMD13C3PJK87 .....................44
DBMD13C3PVK87 .....................50
DBMD13C3SJA197 ....................45
DBMD13C3SVA197 ....................51
DBMD13H3PJK87 .....................60
DBMD13H3SJA197.....................61
DBMD13P3PVK87 .....................64
DBMD13P3SVA197 ....................65
DBMD17C2PJK87 .....................44
DBMD17C2PVK87 .....................50
DBMD17C2SJA197 ....................45
DBMD17C2SVA197 ....................51
DBMD17H2PJK87 .....................60
DBMD17H2SJA197.....................61
DBMD17P2PVK87 .....................64
DBMD17P2SVA197 ....................65
DBMD21C1PJK87 .....................44
DBMD21C1PVK87 .....................50
DBMD21C1SJA197.....................45
DBMD21C1SVA197.....................51
DBMD21H1PJK87 .....................60
DBMD21H1SJA197 .....................61
DBMD21P1PVK87 .....................64
DBMD21P1SVA197 ....................65
DBMD25PJK87 .......................16
DBMD25SJA197 ......................17
DBMD5C5PJK87 ......................44
DBMD5C5PVK87 ......................50
DBMD5C5SJA197 .....................45
DBMD5C5SVA197 .....................51
DBMD5H5PJK87 ......................60
DBMD5H5SJA197 .....................61
DBMD5P5PVK87 ......................64
DBMD5P5SVA197 .....................65
DBMD9C4PJK87 ......................44
DBMD9C4PVK87 ......................50
DBMD9C4SJA197 .....................45
DBMD9C4SVA197 .....................51
DBMD9H4PJK87 ......................60
DBMD9H4SJA197 .....................61
DBMD9P4PVK87 ......................64
DBMD9P4SVA197 .....................65
DBME13W3PK87 ......................78
DBME13W3SA197 .....................79
DBME17W2PK87 ......................78
DBME17W2SA197 .....................79
DBME21W1PK87 ......................78
DBME21W1SA197 .....................79
DBME25P ..........................140
DBME25S...........................141
DBME5W5PK87.......................78
DBME5W5SA197 ......................79
DBME9W4PK87.......................78
DBME9W4SA197 ......................79
DBMG13C3PJK87 .....................44
DBMG13C3PVK87 .....................50
DBMG13C3SJA197 ....................45
DBMG13C3SVA197 ....................51
DBMG13H3PJK87 .....................60
DBMG13H3SJA197 ....................61
DBMG13P3PVK87 .....................64
DBMG13P3SVA197 ....................65
DBMG17C2PJK87 .....................44
DBMG17C2PVK87 .....................50
DBMG17C2SJA197 ....................45
DBMG17C2SVA197 ....................51
DBMG17H2PJK87 .....................60
DBMG17H2SJA197 ....................61
DBMG17P2PVK87 .....................64
DBMG17P2SVA197 ....................65
DBMG21C1PJK87 .....................44
DBMG21C1PVK87 .....................50
DBMG21C1SJA197.....................45
DBMG21C1SVA197.....................51
DBMG21H1PJK87 .....................60
DBMG21H1SJA197 .....................61
DBMG21P1PVK87 .....................64
DBMG21P1SVA197 ....................65
DBMG25PJK87 .......................16
DBMG25SJA197 ......................17
DBMG5C5PJK87 ......................44
DBMG5C5PVK87 ......................50
DBMG5C5SJA197 .....................45
DBMG5C5SVA197 .....................51
DBMG5H5PJK87 ......................60
DBMG5H5SJA197 .....................61
DBMG5P5PVK87 ......................64
DBMG5P5SVA197 .....................65
DBMG9C4PJK87 ......................44
DBMG9C4PVK87 ......................50
DBMG9C4SJA197 .....................45
DBMG9C4SVA197 .....................51
DBMG9H4PJK87 ......................60
DBMG9H4SJA197 .....................61
DBMG9P4PVK87 ......................64
DBMG9P4SVA197 .....................65
DBMM13W3P........................166
DBMM13W3S........................167
DBMM17W2P........................166
DBMM17W2S........................167
DBMM21W1P ........................166
DBMM21W1S ........................167
DBMM25P ..........................140
DBMM25PA .........................132
DBMM25PB .........................136
DBMM25PC .........................134
DBMM25PD .........................132
DBMM25PE .........................136
DBMM25PF .........................134
DBMM25PF179 ......................138
DBMM25PF179A .....................138
DBMM25PG .........................132
DBMM25PH .........................136
DBMM25PK .........................134
DBMM25PL .........................132
DBMM25PM ........................136
DBMM25PP .........................134
DBMM25PR .........................134
DBMM25PS .........................132
DBMM25PW ........................132
DBMM25PX .........................136
DBMM25PZ .........................136
DBMM25S ..........................141
DBMM25SA .........................133
DBMM25SB .........................137
DBMM25SC .........................135
DBMM25SD .........................133
DBMM25SE .........................137
DBMM25SF .........................135
DBMM25SF179 ......................139
DBMM25SF179A .....................139
DBMM25SG.........................133
DBMM25SH .........................137
DBMM25SK .........................135
DBMM25SL .........................133
DBMM25SM ........................137
DBMM25SP .........................135
DBMM25SR .........................135
DBMM25SS .........................133
DBMM25SW ........................133
DBMM25SX .........................137
DBMM25SZ .........................137
DBMM5W5S ........................167
DBMM9W4P ........................166
DBMM9W4S ........................167
DBMMC13C3PJ ......................146
DBMMC13C3SJ ......................147
D Subminiature Part Number Index
R e a d e r ’ s R e s o u r c e
287
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
DBMMC13H3PJ ......................154
DBMMC13H3SJ ......................155
DBMMC17C2PJ ......................146
DBMMC17C2SJ ......................147
DBMMC17H2PJ ......................154
DBMMC17H2SJ ......................155
DBMMC21C1PJ ......................146
DBMMC21C1SJ ......................147
DBMMC21H1PJ ......................154
DBMMC21H1SJ ......................155
DBMMC5C5PJ .......................146
DBMMC5C5SJ .......................147
DBMMC5H5PJ .......................154
DBMMC5H5SJ .......................155
DBMMC9C4PJ .......................146
DBMMC9C4SJ .......................147
DBMMC9H4PJ .......................154
DBMMC9H4SJ .......................155
DBMMD13C3PJ ......................146
DBMMD13C3SJ ......................147
DBMMD13H3PJ ......................154
DBMMD13H3SJ ......................155
DBMMD17C2PJ ......................146
DBMMD17C2SJ ......................147
DBMMD17H2PJ ......................154
DBMMD17H2SJ ......................155
DBMMD21C1PJ ......................146
DBMMD21C1SJ ......................147
DBMMD21H1PJ ......................154
DBMMD21H1SJ ......................155
DBMMD5C5PJ .......................146
DBMMD5C5SJ .......................147
DBMMD5H5PJ .......................154
DBMMD5H5SJ.......................155
DBMMD9C4PJ .......................146
DBMMD9C4SJ .......................147
DBMMD9H4PJ .......................154
DBMMD9H4SJ.......................155
DBMME13W3P.......................166
DBMME13W3S.......................167
DBMME17W2P.......................166
DBMME17W2S.......................167
DBMME21W1P .......................166
DBMME21W1S .......................167
DBMME25P .........................140
DBMME25S .........................141
DBMME5W5P .......................166
DBMME5W5S .......................167
DBMME9W4P .......................166
DBMME9W4S .......................167
DBMMG13C3PJ ......................146
DBMMG13C3SJ ......................147
DBMMG13H3PJ ......................154
DBMMG13H3SJ ......................155
DBMMG17C2PJ ......................146
DBMMG17C2SJ ......................147
DBMMG17H2PJ ......................154
DBMMG17H2SJ ......................155
DBMMG21C1PJ ......................146
DBMMG21C1SJ ......................147
DBMMG21H1PJ ......................154
DBMMG21H1SJ ......................155
DBMMG5C5PJ .......................146
DBMMG5C5SJ .......................147
DBMMG5H5PJ.......................154
DBMMG5H5SJ.......................155
DBMMG9C4PJ .......................146
DBMMG9C4SJ .......................147
DBMMG9H4PJ.......................154
DBMMG9H4SJ.......................155
DBMMN13C3PN......................150
DBMMN13C3SN ......................151
DBMMN13H3PN......................158
DBMMN13H3SN......................159
DBMMN13V3PN ......................162
DBMMN13V3SN ......................163
DBMMN17C2PN......................150
DBMMN17C2SN ......................151
DBMMN17H2PN......................158
DBMMN17H2SN......................159
DBMMN17V2PN ......................162
DBMMN17V2SN ......................163
DBMMN21C1PN ......................150
DBMMN21C1SN ......................151
DBMMN21H1PN ......................158
DBMMN21H1SN ......................159
DBMMN21V1PN ......................162
DBMMN21V1SN ......................163
DBMMN5C5PN ......................150
DBMMN5C5SN.......................151
DBMMN5H5PN ......................158
DBMMN5H5SN ......................159
DBMMN5V5PN.......................162
DBMMN5V5SN.......................163
DBMMN9C4PN ......................150
DBMMN9C4SN.......................151
DBMMN9H4PN ......................158
DBMMN9H4SN ......................159
DBMMN9V4PN.......................162
DBMMN9V4SN.......................163
DBMMP13C3PJ ......................146
DBMMP13C3SJ ......................147
DBMMP13H3PJ ......................154
DBMMP13H3SJ ......................155
DBMMP17C2PJ ......................146
DBMMP17C2SJ ......................147
DBMMP17H2PJ ......................154
DBMMP17H2SJ ......................155
DBMMP21C1PJ ......................146
DBMMP21C1SJ ......................147
DBMMP21H1PJ ......................154
DBMMP21H1SJ ......................155
DBMMP5C5PJ .......................146
DBMMP5C5SJ .......................147
DBMMP5H5PJ .......................154
DBMMP5H5SJ .......................155
DBMMP5W5P .......................166
DBMMP9C4PJ .......................146
DBMMP9C4SJ .......................147
DBMMP9H4PJ .......................154
DBMMP9H4SJ .......................155
DBMMV13C3PN ......................150
DBMMV13C3SN ......................151
DBMMV13H3PN ......................158
DBMMV13H3SN ......................159
DBMMV13V3PN ......................162
DBMMV13V3SN ......................163
DBMMV17C2PN ......................150
DBMMV17C2SN ......................151
DBMMV17H2PN ......................158
DBMMV17H2SN ......................159
DBMMV17V2PN ......................162
DBMMV17V2SN ......................163
DBMMV21C1PN ......................150
DBMMV21C1SN ......................151
DBMMV21H1PN ......................158
DBMMV21H1SN ......................159
DBMMV21V1PN ......................162
DBMMV21V1SN ......................163
DBMMV5C5PN.......................150
DBMMV5C5SN .......................151
DBMMV5H5PN.......................158
DBMMV5H5SN.......................159
DBMMV5V5PN.......................162
DBMMV5V5SN.......................163
DBMMV9C4PN.......................150
DBMMV9C4SN .......................151
DBMMV9H4PN.......................158
DBMMV9H4SN.......................159
DBMMV9V4PN.......................162
DBMMV9V4SN.......................163
DBMMY13W3P.......................166
DBMMY13W3S.......................167
DBMMY17W2P.......................166
DBMMY17W2S.......................167
DBMMY21W1P .......................166
DBMMY21W1S .......................167
DBMMY25P .........................140
DBMMY25S .........................141
DBMMY5W5P .......................166
DBMMY5W5S .......................167
DBMMY9W4P .......................166
DBMMY9W4S .......................167
DBMMZ13C3PN ......................150
DBMMZ13C3SN ......................151
DBMMZ13H3PN ......................158
DBMMZ13H3SN ......................159
DBMMZ13V3PN ......................162
DBMMZ13V3SN ......................163
DBMMZ17C2PN ......................150
DBMMZ17C2SN ......................151
DBMMZ17H2PN ......................158
DBMMZ17H2SN ......................159
DBMMZ17V2PN ......................162
DBMMZ17V2SN ......................163
DBMMZ21C1PN ......................150
DBMMZ21C1SN ......................151
DBMMZ21H1PN ......................158
DBMMZ21H1SN ......................159
DBMMZ21V1PN ......................162
DBMMZ21V1SN ......................163
DBMMZ5C5PN .......................150
DBMMZ5C5SN .......................151
DBMMZ5H5PN.......................158
DBMMZ5H5SN.......................159
DBMMZ5V5PN .......................162
DBMMZ5V5SN .......................163
DBMMZ9C4PN .......................150
DBMMZ9C4SN .......................151
DBMMZ9H4PN.......................158
DBMMZ9H4SN.......................159
DBMMZ9V4PN .......................162
DBMMZ9V4SN .......................163
DBMN13C3PNK87 .....................52
DBMN13C3PYK87 .....................56
DBMN13C3SNA197 ....................53
DBMN13C3SYA197 ....................57
DBMN13H3PNK87 .....................66
DBMN13H3PYK87 .....................70
DBMN13H3SNA197 ....................67
DBMN13H3SYA197 ....................71
DBMN17C2PNK87 .....................52
DBMN17C2PYK87 .....................56
DBMN17C2SNA197 ....................53
DBMN17C2SYA197 ....................57
DBMN17H2PNK87 .....................66
DBMN17H2PYK87 .....................70
DBMN17H2SNA197 ....................67
DBMN17H2SYA197 ....................71
DBMN21C1PNK87 .....................52
DBMN21C1PYK87 .....................56
DBMN21C1SNA197 ....................53
DBMN21C1SYA197 ....................57
DBMN21H1PNK87 .....................66
DBMN21H1PYK87 .....................70
DBMN21H1SNA197 ....................67
DBMN21H1SYA197.....................71
DBMN25PNK87 ........................6
DBMN25SNA197 .......................7
DBMN5C5PNK87......................52
DBMN5C5PYK87 ......................56
DBMN5C5SNA197 .....................53
DBMN5C5SYA197 .....................57
DBMN5H5PNK87......................66
DBMN5H5PYK87 ......................70
DBMN5H5SNA197 .....................67
DBMN5H5SYA197 .....................71
DBMN9C4PNK87......................52
DBMN9C4PYK87 ......................56
DBMN9C4SNA197 .....................53
DBMN9C4SYA197 .....................57
DBMN9H4PNK87......................66
DBMN9H4PYK87 ......................70
DBMN9H4SNA197 .....................67
DBMN9H4SYA197 .....................71
DBMP13C3PJK87 .....................44
DBMP13C3PVK87 .....................50
DBMP13C3SJA197 ....................45
DBMP13C3SVA197 ....................51
DBMP13H3PJK87 .....................60
DBMP13H3SJA197.....................61
DBMP13P3PVK87 .....................64
DBMP13P3SVA197 ....................65
DBMP17C2PJK87 .....................44
DBMP17C2PVK87 .....................50
DBMP17C2SJA197 ....................45
DBMP17C2SVA197 ....................51
DBMP17H2PJK87 .....................60
DBMP17H2SJA197.....................61
DBMP17P2PVK87 .....................64
DBMP17P2SVA197 ....................65
DBMP21C1PJK87 .....................44
DBMP21C1PVK87 .....................50
DBMP21C1SJA197 .....................45
DBMP21C1SVA197 .....................51
DBMP21H1PJK87 .....................60
DBMP21H1SJA197 .....................61
DBMP21P1PVK87 .....................64
DBMP21P1SVA197.....................65
DBMP25PJK87 .......................16
DBMP25SJA197.......................17
DBMP5C5PJK87 ......................44
DBMP5C5PVK87 ......................50
DBMP5C5SJA197 .....................45
DBMP5C5SVA197 .....................51
DBMP5H5PJK87 ......................60
DBMP5H5SJA197 .....................61
DBMP5P5PVK87 ......................64
DBMP5P5SVA197 .....................65
DBMP5W5PK87 ......................78
DBMP5W5PNM ......................188
DBMP9C4PJK87 ......................44
DBMP9C4PVK87 ......................50
DBMP9C4SJA197 .....................45
DBMP9C4SVA197 .....................51
DBMP9H4PJK87 ......................60
DBMP9H4SJA197 .....................61
DBMP9P4PVK87 ......................64
DBMP9P4SVA197 .....................65
DBMV13C3PNK87 .....................52
DBMV13C3PYK87 .....................56
DBMV13C3SNA197 ....................53
DBMV13C3SYA197 ....................57
DBMV13H3PNK87 .....................66
DBMV13H3PYK87 .....................70
DBMV13H3SNA197 ....................67
DBMV13H3SYA197 ....................71
DBMV17C2PNK87 .....................52
DBMV17C2PYK87 .....................56
DBMV17C2SNA197 ....................53
DBMV17C2SYA197 ....................57
DBMV17H2PNK87 .....................66
DBMV17H2PYK87 .....................70
DBMV17H2SNA197 ....................67
DBMV17H2SYA197 ....................71
DBMV21C1PNK87 .....................52
DBMV21C1PYK87 .....................56
DBMV21C1SNA197 ....................53
DBMV21C1SYA197.....................57
DBMV21H1PNK87 .....................66
DBMV21H1PYK87 .....................70
DBMV21H1SNA197 ....................67
DBMV21H1SYA197 .....................71
DBMV25PNK87 ........................6
DBMV25SNA197 .......................7
DBMV5C5PNK87 ......................52
DBMV5C5PYK87 ......................56
DBMV5C5SNA197 .....................53
DBMV5C5SYA197 .....................57
DBMV5H5PNK87 ......................66
DBMV5H5PYK87 ......................70
DBMV5H5SNA197 .....................67
DBMV5H5SYA197 .....................71
DBMV9C4PNK87 ......................52
DBMV9C4PYK87 ......................56
DBMV9C4SNA197 .....................53
DBMV9C4SYA197 .....................57
DBMV9H4PNK87 ......................66
DBMV9H4PYK87 ......................70
DBMV9H4SNA197 .....................67
DBMV9H4SYA197 .....................71
DBMY13W3PK87 ......................78
DBMY13W3PNM .....................188
DBMY13W3SA197 .....................79
DBMY13W3SNM .....................189
DBMY17W2PK87 ......................78
DBMY17W2PNM .....................188
DBMY17W2SA197 .....................79
DBMY17W2SNM .....................189
DBMY21W1PK87 ......................78
DBMY21W1PNM......................188
DBMY21W1SA197 .....................79
D Subminiature Part Number Index
R e a d e r ’ s R e s o u r c e
288
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DBMY21W1SNM......................189
DBMY25P ..........................140
DBMY25PNM ........................180
DBMY25PNM*1AON...................176
DBMY25POL3NM.....................172
DBMY25S...........................141
DBMY25SNM ........................181
DBMY25SNM*1AON...................177
DBMY25SOL3NM.....................173
DBMY5W5PK87.......................78
DBMY5W5PNM ......................188
DBMY5W5SA197......................79
DBMY5W5SNM ......................189
DBMY9W4PK87.......................78
DBMY9W4PNM ......................188
DBMY9W4SA197......................79
DBMY9W4SNM ......................189
DBMZ13C3PNK87 .....................52
DBMZ13C3PYK87 .....................56
DBMZ13C3SNA197 ....................53
DBMZ13C3SYA197 ....................57
DBMZ13H3PNK87 .....................66
DBMZ13H3PYK87 .....................70
DBMZ13H3SNA197 ....................67
DBMZ13H3SYA197.....................71
DBMZ17C2PNK87 .....................52
DBMZ17C2PYK87 .....................56
DBMZ17C2SNA197 ....................53
DBMZ17C2SYA197 ....................57
DBMZ17H2PNK87 .....................66
DBMZ17H2PYK87 .....................70
DBMZ17H2SNA197 ....................67
DBMZ17H2SYA197.....................71
DBMZ21C1PNK87 .....................52
DBMZ21C1PYK87 .....................56
DBMZ21C1SNA197.....................53
DBMZ21C1SYA197 .....................57
DBMZ21H1PNK87 .....................66
DBMZ21H1PYK87 .....................70
DBMZ21H1SNA197 ....................67
DBMZ21H1SYA197 .....................71
DBMZ25PNK87 ........................6
DBMZ25SNA197 .......................7
DBMZ5C5PNK87 ......................52
DBMZ5C5PYK87 ......................56
DBMZ5C5SNA197 .....................53
DBMZ5C5SYA197 .....................57
DBMZ5H5PNK87 ......................66
DBMZ5H5PYK87 ......................70
DBMZ5H5SNA197 .....................67
DBMZ5H5SYA197 .....................71
DBMZ9C4PNK87 ......................52
DBMZ9C4PYK87 ......................56
DBMZ9C4SNA197 .....................53
DBMZ9C4SYA197 .....................57
DBMZ9H4PNK87 ......................66
DBMZ9H4PYK87 ......................70
DBMZ9H4SNA197 .....................67
DBMZ9H4SYA197 .....................71
DBNG25P-P1..........................4
DBNG25S-P1..........................5
DBNGE25P-P1 .........................4
DBNGE25S-P1.........................5
DBNGL25P-P1 .........................4
DBNGL25S-P1 .........................5
DBNGX25P-P1.........................4
DBNGX25S-P1.........................5
DBNGZ25P-P1 .........................4
DBNGZ25S-P1 .........................5
DBW25P* ...........................38
DBW25P*G ..........................38
DBW25S* ...........................39
DBW25S*G ..........................39
DBWE25P* ..........................38
DBWE25P*G .........................38
DBWE25S* ..........................39
DBWE25S*G .........................39
DBX25P-0L2-K87-146 ..................10
DBX25PK87..........................32
DBX25S-0L2-A197-146 .................11
DBX25SA197 .........................33
DC-59-20 .......................195, 218
DC-60-20 .......................195, 218
DC111808-1 .........................216
DC111808-5 .........................216
DC115339-23 .......................205
DC115339-3 ........................207
DC115386-100A ......................195
DC115386-4B .......................207
DC121073-152.......................200
DC121073-52 .......................200
DC19678-138 ....................193, 1 95
DC19678-162........................195
DC19678-173........................195
DC19678-3 .........................204
DC19977-3 .........................204
DC19977-45.....................193, 1 95
DC20963...........................203
DC20963-17 ........................192
DC22070 ...........................215
DC22071 ...........................214
DC24660...........................203
DC24660-16.....................192, 1 95
DC37P-0L2-K87 ......................10
DC37P-1A5N-K87 .....................26
DC37P-1A6N-K87 .....................26
DC37P-1A7N-K87 .....................22
DC37P-1A8N-K87 .....................22
DC37P-1A9N-K87 .....................22
DC37P-1ADN-K87 .....................24
DC37P-1AFN-K87 .....................22
DC37P-1AJN-K87 .....................24
DC37P-1AON-K87 .....................20
DC37P-1ATN-K87 .....................26
DC37P-1AUN-K87 .....................26
DC37P-1AVN-K87 .....................24
DC37P-1AWN-K87.....................24
DC37P-F179A-K87.....................12
DC37PK87...........................32
DC37S-0L2-A197 ......................11
DC37S-1A5N-A197 ....................27
DC37S-1A6N-A197 ....................27
DC37S-1A7N-A197 ....................23
DC37S-1A8N-A197 ....................23
DC37S-1A9N-A197 ....................23
DC37S-1ADN-A197 ....................25
DC37S-1AFN-A197 ....................23
DC37S-1AJN-A197 ....................25
DC37S-1AON-A197 ....................21
DC37S-1ATN-A197 ....................27
DC37S-1AUN-A197 ....................27
DC37S-1AVN-A197 ....................25
DC37S-1AWN-A197 ....................25
DC37S-F179A-A197 ....................13
DC37SA197 ..........................33
DC50907-1 .........................218
DC51214 ...........................206
DC51215 ...........................206
DC51222-1..........................210
DC53750-3 .........................218
DCA21WA4PK87F0 ....................80
DCA21WA4SA197F0 ...................81
DCA25W3PK87F0 .....................80
DCA37PK87FO .......................36
DCA37SA197FO.......................37
DCA8W8PK87F0 ......................80
DCA8W8SA197F0 .....................81
DCE37P-0L2-K87-146 ..................10
DCE37PK87..........................32
DCE37S-0L2-A197-146 .................11
DCE37SA197 .........................33
DCJK37P*-1A0N .....................110
DCJK37P*-1A5N .....................118
DCJK37P*-1A6N .....................118
DCJK37P*-1A7N .....................114
DCJK37P*-1A8N .....................114
DCJK37P*-1A9N .....................114
DCJK37P*-1ADN .....................116
DCJK37P*-1AFN......................114
DCJK37P*-1AGN .....................116
DCJK37P*-1AHN .....................114
DCJK37P*-1AJN......................116
DCJK37P*-1APN .....................118
DCJK37P*-1ATN .....................118
DCJK37P*-1AUN .....................118
DCJK37P*-1AVN .....................116
DCJK37P*-1AWN .....................116
DCJK37P*-1U0N .....................108
DCJK37P*-1U7N .....................112
DCJK37P*-1U7N-146 ..................112
DCJK37P*-OL4 ......................120
DCJK37S*-1A0N......................111
DCJK37S*-1A5N .....................119
DCJK37S*-1A6N .....................119
DCJK37S*-1A7N .....................115
DCJK37S*-1A8N .....................115
DCJK37S*-1A9N .....................115
DCJK37S*-1ADN .....................117
DCJK37S*-1AFN .....................115
DCJK37S*-1AGN .....................117
DCJK37S*-1AHN .....................115
DCJK37S*-1AJN......................117
DCJK37S*-1APN .....................119
DCJK37S*-1ATN .....................119
DCJK37S*-1AUN .....................119
DCJK37S*-1AVN .....................117
DCJK37S*-1AWN .....................117
DCJK37S*-1U0N .....................109
DCJK37S*-1U7N .....................113
DCJK37S*-1U7N-146 ..................113
DCJK37S*-OL4 ......................121
DCJKE37P*-1A0N ....................110
DCJKE37P*-1U0N ....................108
DCJKE37P*-OL4 .....................120
DCJKE37P*-OL4-146..................120
DCJKE37S*-1A0N.....................111
DCJKE37S*-1U0N ....................109
DCJKE37S*-OL4 .....................121
DCJKE37S*-OL4-146 ..................121
DCJKX37P*-1A0N ....................110
DCJKX37P*-OL4 .....................120
DCJKX37P*-OL4-146..................120
DCJKX37S*-1A0N.....................111
DCJKX37S*-OL4 .....................121
DCJKX37S*-OL4-146 ..................121
DCJT37P ...........................122
DCJT37S* ..........................123
DCJTE37P ..........................122
DCJTE37S* .........................123
DCJTX37P ..........................122
DCJTX37S* .........................123
DCM-13W6P-1A0N-K87.................74
DCM-13W6P-1A7N-K87.................74
DCM-13W6P-NMB-76 .................195
DCM-13W6P-NMB-77 .................195
DCM-13W6P-NMC-76 .................195
DCM-13W6P-NMC-77 .................195
DCM-13W6P-OL2-K87..................76
DCM-13W6P-OL4-K87..................76
DCM-13W6S-1A0N-A197 ................75
DCM-13W6S-1A7N-A197 ................75
DCM-13W6S-NMB-77 .................195
DCM-13W6S-NMC-77 .................195
DCM-13W6S-OL2-A197 .................77
DCM-13W6S-OL4-A197 .................77
DCM-17W5P-1A0N-K87.................74
DCM-17W5P-1A7N-K87.................74
DCM-17W5P-NMB-76 .................195
DCM-17W5P-NMC-76 .................195
DCM-17W5P-NMC-77 .................195
DCM-17W5P-OL2-K87..................76
DCM-17W5P-OL4-K87..................76
DCM-17W5S-1A0N-A197 ................75
DCM-17W5S-1A7N-A197 ................75
DCM-17W5S-NMB-77 .................195
DCM-17W5S-NMC-76 .................195
DCM-17W5S-NMC-77 .................195
DCM-17W5S-OL2-A197 .................77
DCM-17W5S-OL4-A197 .................77
DCM-21W4P-NMB-77 .................195
DCM-21W4S-NMB-77 .................195
DCM-21WA4P-1A0N-K87................74
DCM-21WA4P-1A7N-K87................74
DCM-21WA4P-NMB-77 ................195
DCM-21WA4P-NMC-76 ................195
DCM-21WA4P-OL2-K87 ................76
DCM-21WA4P-OL4-K87 ................76
DCM-21WA4S-1A0N-A197 ...............75
DCM-21WA4S-1A7N-A197 ...............75
DCM-21WA4S-NMB-77 ................195
DCM-21WA4S-OL2-A197................77
DCM-21WA4S-OL4-A197................77
DCM-25W36-NMB-77 .................195
DCM-25W3P-1A0N-K87 ................74
DCM-25W3P-1A7N-K87 ................74
DCM-25W3P-NMB-77 .................195
DCM-25W3P-OL2-K87 .................76
DCM-25W3P-OL4-K87 .................76
DCM-25W3S-1A0N-A197................75
DCM-25W3S-1A7N-A197................75
DCM-25W3S-NMC-76 .................195
DCM-25W3S-NMC-77 .................195
DCM-25W3S-OL2-A197.................77
DCM-25W3S-OL4-A197.................77
DCM-27W2P-1A0N-K87 ................74
DCM-27W2P-1A7N-K87 ................74
DCM-27W2P-OL2-K87 .................76
DCM-27W2P-OL4-K87 .................76
DCM-27W2S-1A0N-A197................75
DCM-27W2S-1A7N-A197................75
DCM-27W2S-NMC-76 .................195
DCM-27W2S-OL2-A197.................77
DCM-27W2S-OL4-A197.................77
DCM-37P-NMC-77....................195
DCM-37S-NMB-76....................195
DCM-37S-NMC-76....................195
DCM-37S-NMC-77....................195
DCM-8W8P-1A0N-K87 .................74
DCM-8W8P-1A7N-K87 .................74
DCM-8W8P-NMB-77 ..................195
DCM-8W8P-NMC-77 ..................195
DCM-8W8P-OL2-K87 ..................76
DCM-8W8P-OL4-K87 ..................76
DCM-8W8S-1A0N-A197.................75
DCM-8W8S-1A7N-A197.................75
DCM-8W8S-MNC-76 ..................195
DCM-8W8S-NMB-77 ..................195
DCM-8W8S-NMC-77 ..................195
DCM-8W8S-OL2-A197..................77
DCM-8W8S-OL4-A197..................77
DCM13W6P1A0NNMBK52 ..............195
DCM13W6P1A7NNMBK52 ..............195
DCM13W6P1A9NNMBK52 ..............195
DCM13W6PF179ANMBK52 .............195
DCM13W6PK87.......................78
DCM13W6PNM ......................188
DCM13W6PNMBK52 ..................195
DCM13W6POL3NMBK52 ...............195
DCM13W6S1A0NNMBK52 ..............195
DCM13W6S1A7NNMBK52 ..............195
DCM13W6S1A9NNMBK52 ..............195
DCM13W6SA197 ......................79
DCM13W6SF179ANMBK52 .............195
DCM13W6SNM ......................189
DCM13W6SNMBK52 ..................195
DCM13W6SNMC76 ...................195
DCM13W6SOL3NMBK52 ...............195
DCM17W5P1A0NNMBK52 ..............195
DCM17W5P1A7NNMBK52 ..............195
DCM17W5P1A9NNMBK52 ..............195
DCM17W5PF179ANMBK52 .............195
DCM17W5PK87.......................78
DCM17W5PNM ......................188
DCM17W5PNMB77 ...................195
DCM17W5PNMBK52 ..................195
DCM17W5POL3NMBK52 ...............195
DCM17W5S-NMB-76 ..................195
DCM17W5S1A0NNMBK52 ..............195
DCM17W5S1A7NNMBK52 ..............195
DCM17W5S1A9NNMBK52 ..............195
DCM17W5SA197 ......................79
DCM17W5SF179ANMBK52 .............195
DCM17W5SNM ......................189
DCM17W5SNMBK52 ..................195
DCM17W5SOL3NMBK52 ...............195
DCM21W4S-NMC-76 ..................195
DCM21WA4P-NMB-76 .................195
DCM21WA4P1A0NNMBK52 .............195
DCM21WA4P1A7NNMBK52 .............195
DCM21WA4P1A9NNMBK52 .............195
DCM21WA4PF179ANMBK52 ............195
DCM21WA4PK87......................78
R e a d e r ’ s R e s o u r c e
289
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DCM21WA4PNM .....................188
DCM21WA4PNMBK52 .................195
DCM21WA4POL3NMBK52 ..............195
DCM21WA4S-NMB-76 .................195
DCM21WA4S1A0NNMBK52 .............195
DCM21WA4S1A7NNMBK52 .............195
DCM21WA4S1A9NNMBK52 .............195
DCM21WA4SA197 .....................79
DCM21WA4SF179ANMBK52 ............195
DCM21WA4SNM .....................189
DCM21WA4SNMBK52 .................195
DCM21WA4SOL3NMBK52 ..............195
DCM25W3P-NMB-76 ..................195
DCM25W3P1A0NNMBK52 ..............195
DCM25W3P1A7NNMBK52 ..............195
DCM25W3P1A9NNMBK52 ..............195
DCM25W3PF179ANMBK52 .............195
DCM25W3PK87 ......................78
DCM25W3PNM ......................188
DCM25W3PNMBK52 ..................195
DCM25W3POL3NMBK52 ...............195
DCM25W3S1A0NNMBK52 ..............195
DCM25W3S1A7NNMBK52 ..............195
DCM25W3S1A9NNMBK52 ..............195
DCM25W3SA197......................79
DCM25W3SF179ANMBK52 .............195
DCM25W3SNM ......................189
DCM25W3SNMBK52 ..................195
DCM25W3SOL3NMBK52 ...............195
DCM27W2OL3NMBK52 ................195
DCM27W2P-NMC-76..................195
DCM27W2P1A0NNMBK52 ..............195
DCM27W2P1A7NNMBK52 ..............195
DCM27W2P1A9NNMBK52 ..............195
DCM27W2PF179ANMBK52 .............195
DCM27W2PK87 ......................78
DCM27W2PNM ......................188
DCM27W2PNMBK52 ..................195
DCM27W2POL3NMBK52 ...............195
DCM27W2S1A0NNMBK52 ..............195
DCM27W2S1A7NNMBK52 ..............195
DCM27W2S1A9NNMBK52 ..............195
DCM27W2SA197......................79
DCM27W2SF179ANMBK52 .............195
DCM27W2SNM ......................189
DCM27W2SNMBK52 ..................195
DCM37P ...........................140
DCM37P1A0NNMBK52 ................195
DCM37P1A7NNMBK52 ................195
DCM37P1A9NNMBK52 ................195
DCM37PA ..........................132
DCM37PB ..........................136
DCM37PC ..........................134
DCM37PD ..........................132
DCM37PE ..........................136
DCM37PF ..........................134
DCM37PF179........................138
DCM37PF179A.......................138
DCM37PF179ANMBK52 ................195
DCM37PG ..........................132
DCM37PH ..........................136
DCM37PK ..........................134
DCM37PL ..........................132
DCM37PLNM ........................174
DCM37PM ..........................136
DCM37PNM.........................180
DCM37PNM*1A7N....................178
DCM37PNM*1A9N....................178
DCM37PNM*1AON ...................176
DCM37PNMB76......................195
DCM37PNMB77......................195
DCM37PNMBK52.....................195
DCM37PNMC76......................195
DCM37POL3NM......................172
DCM37POL3NMBK52 .................195
DCM37PP ..........................134
DCM37PR ..........................134
DCM37PS ..........................132
DCM37PW ..........................132
DCM37PX ..........................136
DCM37PZ ..........................136
DCM37S............................141
DCM37S1A0NNMBK52 ................195
DCM37S1A7NNMBK52 ................195
DCM37S1A9NNMBK52 ................195
DCM37SA ..........................133
DCM37SB ..........................137
DCM37SC ..........................135
DCM37SD ..........................133
DCM37SE ..........................137
DCM37SF ..........................135
DCM37SF179........................139
DCM37SF179A.......................139
DCM37SF179ANMBK52 ................195
DCM37SG ..........................133
DCM37SH ..........................137
DCM37SK ..........................135
DCM37SL ..........................133
DCM37SLNM ........................175
DCM37SM ..........................137
DCM37SNM .........................181
DCM37SNM*1A7N....................179
DCM37SNM*1A9N....................179
DCM37SNM*1AON ...................177
DCM37SNMB77......................195
DCM37SNMBK52.....................195
DCM37SOL3NM......................173
DCM37SOL3NMBK52 .................195
DCM37SP ..........................135
DCM37SR ..........................135
DCM37SS ..........................133
DCM37SW ..........................133
DCM37SX ..........................137
DCM37SZ ..........................137
DCM50PC ..........................134
DCM8W8PK87 .......................78
DCM8W8PNM .......................188
DCM8W8PNMB76 ....................195
DCM8W8PNMBK52 ...................195
DCM8W8PNMC76 ....................195
DCM8W8SA197.......................79
DCM8W8SNM .......................189
DCM8W8SNMB76 ....................195
DCM8W8SNMBK52 ...................195
DCMA37PNM........................182
DCMA37PNMBK52 ...................195
DCMA37SNM........................183
DCMA37SNMBK52 ...................195
DCMA62PNM........................184
DCMA62SNM........................185
DCMAY37PNM.......................182
DCMAY37SNM.......................183
DCMAY62PNM.......................184
DCMAY62SNM.......................185
DCMB-17W5S-NMB-76 ................195
DCMB-37S-NMB-77...................195
DCMB-37S-NMC-77...................195
DCMB37S-NMB-76 ...................195
DCMB37S-NMC-76 ...................195
DCMC13C6PJK87 .....................44
DCMC13C6PVK87 .....................50
DCMC13C6SJA197 ....................45
DCMC13C6SVA197 ....................51
DCMC13H6PJK87 .....................60
DCMC13H6SJA197 ....................61
DCMC13P6PVK87 .....................64
DCMC13P6SVA197 ....................65
DCMC17C5PJK87 .....................44
DCMC17C5PVK87 .....................50
DCMC17C5SJA197 ....................45
DCMC17C5SVA197 ....................51
DCMC17H5PJK87 .....................60
DCMC17H5SJA197 ....................61
DCMC17P5PVK87 .....................64
DCMC17P5SVA197 ....................65
DCMC21CA4PJK87 ....................44
DCMC21CA4PVK87 ....................50
DCMC21CA4SJA197 ...................45
DCMC21CA4SVA197 ...................51
DCMC21HA4PJK87 ....................60
DCMC21HA4SJA197 ...................61
DCMC21PA4PVK87 ....................64
DCMC21PA4SVA197 ...................65
DCMC25C3PJK87 .....................44
DCMC25C3PVK87 .....................50
DCMC25C3SJA197 ....................45
DCMC25C3SVA197 ....................51
DCMC25H3PJK87 .....................60
DCMC25H3SJA197 ....................61
DCMC25P3PVK87 .....................64
DCMC25P3SVA197 ....................65
DCMC27C2PJK87 .....................44
DCMC27C2PVK87 .....................50
DCMC27C2SJA197 ....................45
DCMC27C2SVA197 ....................51
DCMC27H2PJK87 .....................60
DCMC27H2SJA197 ....................61
DCMC27P2PVK87 .....................64
DCMC27P2SVA197 ....................65
DCMC37PJK87 .......................16
DCMC37SJA197 ......................17
DCMC8C8PJK87 ......................44
DCMC8C8PVK87 ......................50
DCMC8C8SJA197 .....................45
DCMC8C8SVA197 .....................51
DCMC8H8PJK87 ......................60
DCMC8H8SJA197 .....................61
DCMC8P8PVK87 ......................64
DCMC8P8SVA197 .....................65
DCMD13C6PJK87 .....................44
DCMD13C6PVK87 .....................50
DCMD13C6SJA197 ....................45
DCMD13C6SVA197 ....................51
DCMD13H6PJK87 .....................60
DCMD13H6SJA197 ....................61
DCMD13P6PVK87 .....................64
DCMD13P6SVA197 ....................65
DCMD17C5PJK87 .....................44
DCMD17C5PVK87 .....................50
DCMD17C5SJA197 ....................45
DCMD17C5SVA197 ....................51
DCMD17H5PJK87 .....................60
DCMD17H5SJA197 ....................61
DCMD17P5PVK87 .....................64
DCMD17P5SVA197 ....................65
DCMD21CA4PJK87 ....................44
DCMD21CA4PVK87 ....................50
DCMD21CA4SJA197 ...................45
DCMD21CA4SVA197 ...................51
DCMD21HA4PJK87 ....................60
DCMD21HA4SJA197 ...................61
DCMD21PA4PVK87 ....................64
DCMD21PA4SVA197 ...................65
DCMD25C3PJK87 .....................44
DCMD25C3PVK87.....................50
DCMD25C3SJA197 ....................45
DCMD25C3SVA197 ....................51
DCMD25H3PJK87 .....................60
DCMD25H3SJA197 ....................61
DCMD25P3PVK87 .....................64
DCMD25P3SVA197 ....................65
DCMD27C2PJK87 .....................44
DCMD27C2PVK87.....................50
DCMD27C2SJA197 ....................45
DCMD27C2SVA197 ....................51
DCMD27H2PJK87 .....................60
DCMD27H2SJA197 ....................61
DCMD27P2PVK87 .....................64
DCMD27P2SVA197 ....................65
DCMD37PJK87 .......................16
DCMD37SJA197 ......................17
DCMD8C8PJK87 ......................44
DCMD8C8PVK87......................50
DCMD8C8SJA197 .....................45
DCMD8C8SVA197 .....................51
DCMD8H8PJK87 ......................60
DCMD8H8SJA197 .....................61
DCMD8P8PVK87 ......................64
DCMD8P8SVA197 .....................65
DCME13W6PK87 ......................78
DCME13W6SA197 .....................79
DCME17W5PK87 ......................78
DCME17W5SA197 .....................79
DCME21WA4PK87.....................78
DCME21WA4SA197 ....................79
DCME25W3PK87......................78
DCME25W3SA197.....................79
DCME27W2PK87......................78
DCME27W2SA197.....................79
DCME37P ..........................140
DCME37S...........................141
DCME8W8PK87 ......................78
DCME8W8SA197......................79
DCMG13C6PJK87 .....................44
DCMG13C6PVK87 .....................50
DCMG13C6SJA197 ....................45
DCMG13C6SVA197 ....................51
DCMG13H6PJK87 .....................60
DCMG13H6SJA197 ....................61
DCMG13P6PVK87 .....................64
DCMG13P6SVA197 ....................65
DCMG17C5PJK87 .....................44
DCMG17C5PVK87 .....................50
DCMG17C5SJA197 ....................45
DCMG17C5SVA197 ....................51
DCMG17H5PJK87 .....................60
DCMG17H5SJA197 ....................61
DCMG17P5PVK87 .....................64
DCMG17P5SVA197 ....................65
DCMG21CA4PJK87 ....................44
DCMG21CA4PVK87 ....................50
DCMG21CA4SJA197 ...................45
DCMG21CA4SVA197 ...................51
DCMG21HA4PJK87 ....................60
DCMG21HA4SJA197 ...................61
DCMG21PA4PVK87 ....................64
DCMG21PA4SVA197 ...................65
DCMG25C3PJK87 .....................44
DCMG25C3PVK87.....................50
DCMG25C3SJA197 ....................45
DCMG25C3SVA197 ....................51
DCMG25H3PJK87 .....................60
DCMG25H3SJA197 ....................61
DCMG25P3PVK87 .....................64
DCMG25P3SVA197 ....................65
DCMG27C2PJK87 .....................44
DCMG27C2PVK87.....................50
DCMG27C2SJA197 ....................45
DCMG27C2SVA197 ....................51
DCMG27H2PJK87 .....................60
DCMG27H2SJA197 ....................61
DCMG27P2PVK87 .....................64
DCMG27P2SVA197 ....................65
DCMG37PJK87 .......................16
DCMG37SJA197 ......................17
DCMG8C8PJK87 ......................44
DCMG8C8PVK87......................50
DCMG8C8SJA197 .....................45
DCMG8C8SVA197 .....................51
DCMG8H8PJK87 ......................60
DCMG8H8SJA197 .....................61
DCMG8P8PVK87 ......................64
DCMG8P8SVA197 .....................65
DCMM13W6P .......................166
DCMM13W6S .......................167
DCMM17W5P .......................166
DCMM17W5S .......................167
DCMM21WA4P ......................166
DCMM21WA4S ......................167
DCMM24W7S .......................167
DCMM25W3P .......................166
DCMM25W3S .......................167
DCMM27W2P .......................166
DCMM27W2S .......................167
DCMM36W4S .......................167
DCMM37P ..........................140
DCMM37PA .........................132
DCMM37PB .........................136
DCMM37PC .........................134
DCMM37PD.........................132
DCMM37PE .........................136
DCMM37PF .........................134
DCMM37PF179 ......................138
DCMM37PF179A .....................138
DCMM37PG.........................132
DCMM37PH.........................136
DCMM37PK .........................134
DCMM37PL .........................132
DCMM37PM ........................136
DCMM37PP .........................134
DCMM37PR.........................134
DCMM37PS .........................132
R e a d e r ’ s R e s o u r c e
290
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DCMM37PW ........................132
DCMM37PX .........................136
DCMM37PZ .........................136
DCMM37S ..........................141
DCMM37SA .........................133
DCMM37SB .........................137
DCMM37SC.........................135
DCMM37SD.........................133
DCMM37SE .........................137
DCMM37SF .........................135
DCMM37SF179 ......................139
DCMM37SF179A .....................139
DCMM37SG.........................133
DCMM37SH.........................137
DCMM37SK .........................135
DCMM37SL .........................133
DCMM37SM ........................137
DCMM37SP .........................135
DCMM37SR.........................135
DCMM37SS .........................133
DCMM37SW ........................133
DCMM37SX .........................137
DCMM37SZ .........................137
DCMM43W2S .......................167
DCMM47W1S .......................167
DCMM8W8P ........................166
DCMM8W8S ........................167
DCMMC13C6PJ ......................146
DCMMC13C6SJ ......................147
DCMMC13H6PJ ......................154
DCMMC13H6SJ ......................155
DCMMC17C5PJ ......................146
DCMMC17C5SJ ......................147
DCMMC17H5PJ ......................154
DCMMC17H5SJ ......................155
DCMMC21CA4PJ .....................146
DCMMC21CA4SJ .....................147
DCMMC21HA4PJ .....................154
DCMMC21HA4SJ .....................155
DCMMC25C3PJ ......................146
DCMMC25C3SJ ......................147
DCMMC25H3PJ......................154
DCMMC25H3SJ......................155
DCMMC27C2PJ ......................146
DCMMC27C2SJ ......................147
DCMMC27H2PJ......................154
DCMMC27H2SJ......................155
DCMMC8C8PJ .......................146
DCMMC8C8SJ .......................147
DCMMC8H8PJ.......................154
DCMMC8H8SJ.......................155
DCMMD13C6PJ ......................146
DCMMD13C6SJ ......................147
DCMMD13H6PJ ......................154
DCMMD13H6SJ ......................155
DCMMD17C5PJ ......................146
DCMMD17C5SJ ......................147
DCMMD17H5PJ ......................154
DCMMD17H5SJ ......................155
DCMMD21CA4PJ .....................146
DCMMD21CA4SJ .....................147
DCMMD21HA4PJ .....................154
DCMMD21HA4SJ .....................155
DCMMD25C3PJ ......................146
DCMMD25C3SJ......................147
DCMMD25H3PJ......................154
DCMMD25H3SJ......................155
DCMMD27C2PJ ......................146
DCMMD27C2SJ......................147
DCMMD27H2PJ......................154
DCMMD27H2SJ......................155
DCMMD8C8PJ .......................146
DCMMD8C8SJ.......................147
DCMMD8H8PJ.......................154
DCMMD8H8SJ.......................155
DCMME13W6P.......................166
DCMME13W6S ......................167
DCMME17W5P.......................166
DCMME17W5S ......................167
DCMME21WA4P .....................166
DCMME21WA4S .....................167
DCMME24W7S ......................167
DCMME25W3P ......................166
DCMME25W3S ......................167
DCMME27W2P ......................166
DCMME27W2S ......................167
DCMME36W4S ......................167
DCMME37P .........................140
DCMME37S .........................141
DCMME43W2S ......................167
DCMME47W1S ......................167
DCMME8W8P .......................166
DCMME8W8S .......................167
DCMMG13C6PJ ......................146
DCMMG13C6SJ ......................147
DCMMG13H6PJ ......................154
DCMMG13H6SJ ......................155
DCMMG17C5PJ ......................146
DCMMG17C5SJ ......................147
DCMMG17H5PJ ......................154
DCMMG17H5SJ ......................155
DCMMG21CA4PJ .....................146
DCMMG21CA4SJ .....................147
DCMMG21HA4PJ .....................154
DCMMG21HA4SJ .....................155
DCMMG25C3PJ......................146
DCMMG25C3SJ......................147
DCMMG25H3PJ......................154
DCMMG25H3SJ......................155
DCMMG27C2PJ......................146
DCMMG27C2SJ......................147
DCMMG27H2PJ......................154
DCMMG27H2SJ......................155
DCMMG8C8PJ.......................146
DCMMG8C8SJ.......................147
DCMMG8H8PJ.......................154
DCMMG8H8SJ.......................155
DCMMN13C6PN......................150
DCMMN13C6SN ......................151
DCMMN13H6PN......................158
DCMMN13H6SN......................159
DCMMN13V6PN......................162
DCMMN13V6SN......................163
DCMMN17C5PN......................150
DCMMN17C5SN ......................151
DCMMN17H5PN......................158
DCMMN17H5SN......................159
DCMMN17V5PN......................162
DCMMN17V5SN......................163
DCMMN21CA4PN.....................150
DCMMN21CA4SN .....................151
DCMMN21HA4PN ....................158
DCMMN21HA4SN ....................159
DCMMN21VA4PN.....................162
DCMMN21VA4SN.....................163
DCMMN25C3PN .....................150
DCMMN25C3SN......................151
DCMMN25H3PN .....................158
DCMMN25H3SN .....................159
DCMMN25V3PN .....................162
DCMMN25V3SN .....................163
DCMMN27C2PN .....................150
DCMMN27C2SN......................151
DCMMN27H2PN .....................158
DCMMN27H2SN .....................159
DCMMN27V2PN .....................162
DCMMN27V2SN .....................163
DCMMN8C8PN ......................150
DCMMN8C8SN.......................151
DCMMN8H8PN ......................158
DCMMN8H8SN ......................159
DCMMN8V8PN ......................162
DCMMN8V8SN ......................163
DCMMP13C6PJ ......................146
DCMMP13C6SJ ......................147
DCMMP13H6PJ ......................154
DCMMP13H6SJ ......................155
DCMMP17C5PJ ......................146
DCMMP17C5SJ ......................147
DCMMP17H5PJ ......................154
DCMMP17H5SJ ......................155
DCMMP21CA4PJ .....................146
DCMMP21CA4SJ .....................147
DCMMP21HA4PJ .....................154
DCMMP21HA4SJ .....................155
DCMMP25C3PJ ......................146
DCMMP25C3SJ ......................147
DCMMP25H3PJ ......................154
DCMMP25H3SJ ......................155
DCMMP27C2PJ ......................146
DCMMP27C2SJ ......................147
DCMMP27H2PJ ......................154
DCMMP27H2SJ ......................155
DCMMP8C8PJ .......................146
DCMMP8C8SJ .......................147
DCMMP8H8PJ .......................154
DCMMP8H8SJ .......................155
DCMMV13C6PN ......................150
DCMMV13C6SN ......................151
DCMMV13H6PN......................158
DCMMV13H6SN......................159
DCMMV13V6PN ......................162
DCMMV13V6SN ......................163
DCMMV17C5PN ......................150
DCMMV17C5SN ......................151
DCMMV17H5PN......................158
DCMMV17H5SN......................159
DCMMV17V5PN ......................162
DCMMV17V5SN ......................163
DCMMV21CA4PN.....................150
DCMMV21CA4SN .....................151
DCMMV21HA4PN.....................158
DCMMV21HA4SN.....................159
DCMMV21VA4PN .....................162
DCMMV21VA4SN.....................163
DCMMV25C3PN......................150
DCMMV25C3SN......................151
DCMMV25H3PN .....................158
DCMMV25H3SN .....................159
DCMMV25V3PN......................162
DCMMV25V3SN......................163
DCMMV27C2PN......................150
DCMMV27C2SN......................151
DCMMV27H2PN .....................158
DCMMV27H2SN .....................159
DCMMV27V2PN......................162
DCMMV27V2SN......................163
DCMMV8C8PN.......................150
DCMMV8C8SN.......................151
DCMMV8H8PN ......................158
DCMMV8H8SN ......................159
DCMMV8V8PN.......................162
DCMMV8V8SN.......................163
DCMMY13W6P ......................166
DCMMY13W6S ......................167
DCMMY17W5P ......................166
DCMMY17W5S ......................167
DCMMY21WA4P .....................166
DCMMY21WA4S .....................167
DCMMY24W7S ......................167
DCMMY25W3P ......................166
DCMMY25W3S ......................167
DCMMY27W2P ......................166
DCMMY27W2S ......................167
DCMMY36W4S ......................167
DCMMY37P .........................140
DCMMY37S .........................141
DCMMY43W2S ......................167
DCMMY47W1S ......................167
DCMMY8W8P .......................166
DCMMY8W8S .......................167
DCMMZ13C6PN ......................150
DCMMZ13C6SN ......................151
DCMMZ13H6PN ......................158
DCMMZ13H6SN ......................159
DCMMZ13V6PN ......................162
DCMMZ13V6SN ......................163
DCMMZ17C5PN ......................150
DCMMZ17C5SN ......................151
DCMMZ17H5PN ......................158
DCMMZ17H5SN ......................159
DCMMZ17V5PN ......................162
DCMMZ17V5SN ......................163
DCMMZ21CA4PN .....................150
DCMMZ21CA4SN .....................151
DCMMZ21HA4PN .....................158
DCMMZ21HA4SN .....................159
DCMMZ21VA4PN .....................162
DCMMZ21VA4SN .....................163
DCMMZ25C3PN......................150
DCMMZ25C3SN ......................151
DCMMZ25H3PN......................158
DCMMZ25H3SN......................159
DCMMZ25V3PN ......................162
DCMMZ25V3SN ......................163
DCMMZ27C2PN......................150
DCMMZ27C2SN ......................151
DCMMZ27H2PN......................158
DCMMZ27H2SN......................159
DCMMZ27V2PN ......................162
DCMMZ27V2SN ......................163
DCMMZ8C8PN.......................150
DCMMZ8C8SN .......................151
DCMMZ8H8PN.......................158
DCMMZ8H8SN.......................159
DCMMZ8V8PN .......................162
DCMMZ8V8SN .......................163
DCMN13C6PNK87 .....................52
DCMN13C6PYK87 .....................56
DCMN13C6SNA197 ....................53
DCMN13C6SYA197 ....................57
DCMN13H6PNK87 .....................66
DCMN13H6PYK87 .....................70
DCMN13H6SNA197 ....................67
DCMN13H6SYA197 ....................71
DCMN17C5PNK87 .....................52
DCMN17C5PYK87 .....................56
DCMN17C5SNA197 ....................53
DCMN17C5SYA197 ....................57
DCMN17H5PNK87 .....................66
DCMN17H5PYK87 .....................70
DCMN17H5SNA197 ....................67
DCMN17H5SYA197 ....................71
DCMN21CA4PNK87 ....................52
DCMN21CA4PYK87 ....................56
DCMN21CA4SNA197 ...................53
DCMN21CA4SYA197 ...................57
DCMN21HA4PNK87....................66
DCMN21HA4PYK87 ....................70
DCMN21HA4SNA197 ...................67
DCMN21HA4SYA197 ...................71
DCMN25C3PNK87.....................52
DCMN25C3PYK87 .....................56
DCMN25C3SNA197 ....................53
DCMN25C3SYA197 ....................57
DCMN25H3PNK87.....................66
DCMN25H3PYK87 .....................70
DCMN25H3SNA197 ....................67
DCMN25H3SYA197 ....................71
DCMN27C2PNK87.....................52
DCMN27C2PYK87 .....................56
DCMN27C2SNA197 ....................53
DCMN27C2SYA197 ....................57
DCMN27H2PNK87.....................66
DCMN27H2PYK87 .....................70
DCMN27H2SNA197 ....................67
DCMN27H2SYA197 ....................71
DCMN37PNK87 ........................6
DCMN37SNA197 .......................7
DCMN8C8PNK87......................52
DCMN8C8PYK87 ......................56
DCMN8C8SNA197 .....................53
DCMN8C8SYA197 .....................57
DCMN8H8PNK87......................66
DCMN8H8PYK87 ......................70
DCMN8H8SNA197 .....................67
DCMN8H8SYA197 .....................71
DCMP13C6PJK87 .....................44
DCMP13C6PVK87 .....................50
DCMP13C6SJA197 ....................45
DCMP13C6SVA197 ....................51
DCMP13H6PJK87 .....................60
DCMP13H6SJA197.....................61
DCMP13P6PVK87 .....................64
DCMP13P6SVA197 ....................65
DCMP17C5PJK87 .....................44
DCMP17C5PVK87 .....................50
DCMP17C5SJA197 ....................45
DCMP17C5SVA197 ....................51
DCMP17H5PJK87 .....................60
DCMP17H5SJA197.....................61
DCMP17P5PVK87 .....................64
R e a d e r ’ s R e s o u r c e
291
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DCMP17P5SVA197 ....................65
DCMP21CA4PJK87 ....................44
DCMP21CA4PVK87 ....................50
DCMP21CA4SJA197 ...................45
DCMP21CA4SVA197 ...................51
DCMP21HA4PJK87 ....................60
DCMP21HA4SJA197 ...................61
DCMP21PA4PVK87 ....................64
DCMP21PA4SVA197 ...................65
DCMP25C3PJK87 .....................44
DCMP25C3PVK87 .....................50
DCMP25C3SJA197 ....................45
DCMP25C3SVA197 ....................51
DCMP25H3PJK87 .....................60
DCMP25H3SJA197 ....................61
DCMP25P3PVK87 .....................64
DCMP25P3SVA197 ....................65
DCMP27C2PJK87 .....................44
DCMP27C2PVK87 .....................50
DCMP27C2SJA197 ....................45
DCMP27C2SVA197 ....................51
DCMP27H2PJK87 .....................60
DCMP27H2SJA197 ....................61
DCMP27P2PVK87 .....................64
DCMP27P2SVA197 ....................65
DCMP37PJK87 .......................16
DCMP37SJA197.......................17
DCMP8C8PJK87 ......................44
DCMP8C8PVK87 ......................50
DCMP8C8SJA197 .....................45
DCMP8C8SVA197 .....................51
DCMP8H8PJK87 ......................60
DCMP8H8SJA197 .....................61
DCMP8P8PVK87 ......................64
DCMP8P8SVA197 .....................65
DCMV13C6PNK87 .....................52
DCMV13C6PYK87 .....................56
DCMV13C6SNA197 ....................53
DCMV13C6SYA197 ....................57
DCMV13H6PNK87 .....................66
DCMV13H6PYK87 .....................70
DCMV13H6SNA197 ....................67
DCMV13H6SYA197 ....................71
DCMV17C5PNK87 .....................52
DCMV17C5PYK87 .....................56
DCMV17C5SNA197 ....................53
DCMV17C5SYA197 ....................57
DCMV17H5PNK87 .....................66
DCMV17H5PYK87 .....................70
DCMV17H5SNA197 ....................67
DCMV17H5SYA197 ....................71
DCMV21CA4PNK87 ....................52
DCMV21CA4PYK87 ....................56
DCMV21CA4SNA197 ...................53
DCMV21CA4SYA197 ...................57
DCMV21HA4PNK87 ....................66
DCMV21HA4PYK87 ....................70
DCMV21HA4SNA197 ...................67
DCMV21HA4SYA197 ...................71
DCMV25C3PNK87 .....................52
DCMV25C3PYK87 .....................56
DCMV25C3SNA197 ....................53
DCMV25C3SYA197 ....................57
DCMV25H3PNK87.....................66
DCMV25H3PYK87 .....................70
DCMV25H3SNA197 ....................67
DCMV25H3SYA197 ....................71
DCMV27C2PNK87 .....................52
DCMV27C2PYK87 .....................56
DCMV27C2SNA197 ....................53
DCMV27C2SYA197 ....................57
DCMV27H2PNK87.....................66
DCMV27H2PYK87 .....................70
DCMV27H2SNA197 ....................67
DCMV27H2SYA197 ....................71
DCMV37PNK87 ........................6
DCMV37SNA197 .......................7
DCMV8C8PNK87......................52
DCMV8C8PYK87 ......................56
DCMV8C8SNA197 .....................53
DCMV8C8SYA197 .....................57
DCMV8H8PNK87......................66
DCMV8H8PYK87 ......................70
DCMV8H8SNA197 .....................67
DCMV8H8SYA197 .....................71
DCMY13W6PK87......................78
DCMY13W6PNM .....................188
DCMY13W6SA197 .....................79
DCMY13W6SNM .....................189
DCMY17W5PK87......................78
DCMY17W5PNM .....................188
DCMY17W5SA197 .....................79
DCMY17W5SNM .....................189
DCMY21WA4PK87.....................78
DCMY21WA4PNM ....................188
DCMY21WA4SA197 ....................79
DCMY21WA4SNM ....................189
DCMY25W3PK87 .....................78
DCMY25W3PNM .....................188
DCMY25W3SA197.....................79
DCMY25W3SNM .....................189
DCMY27W2PK87 .....................78
DCMY27W2PNM .....................188
DCMY27W2SA197.....................79
DCMY27W2SNM .....................189
DCMY37P ..........................140
DCMY37PNM........................180
DCMY37PNM*1AON ..................176
DCMY37POL3NM.....................172
DCMY37S...........................141
DCMY37SNM ........................181
DCMY37SNM*1AON ..................177
DCMY37SOL3NM.....................173
DCMY8W8PK87 ......................78
DCMY8W8PNM ......................188
DCMY8W8SA197......................79
DCMY8W8SNM ......................189
DCMZ13C6PNK87 .....................52
DCMZ13C6PYK87 .....................56
DCMZ13C6SNA197 ....................53
DCMZ13C6SYA197 ....................57
DCMZ13H6PNK87 .....................66
DCMZ13H6PYK87 .....................70
DCMZ13H6SNA197 ....................67
DCMZ13H6SYA197.....................71
DCMZ17C5PNK87 .....................52
DCMZ17C5PYK87 .....................56
DCMZ17C5SNA197 ....................53
DCMZ17C5SYA197 ....................57
DCMZ17H5PNK87 .....................66
DCMZ17H5PYK87 .....................70
DCMZ17H5SNA197 ....................67
DCMZ17H5SYA197.....................71
DCMZ21CA4PNK87 ....................52
DCMZ21CA4PYK87 ....................56
DCMZ21CA4SNA197 ...................53
DCMZ21CA4SYA197 ...................57
DCMZ21HA4PNK87 ....................66
DCMZ21HA4PYK87 ....................70
DCMZ21HA4SNA197 ...................67
DCMZ21HA4SYA197 ...................71
DCMZ25C3PNK87 .....................52
DCMZ25C3PYK87 .....................56
DCMZ25C3SNA197 ....................53
DCMZ25C3SYA197 ....................57
DCMZ25H3PNK87 .....................66
DCMZ25H3PYK87 .....................70
DCMZ25H3SNA197 ....................67
DCMZ25H3SYA197 ....................71
DCMZ27C2PNK87 .....................52
DCMZ27C2PYK87 .....................56
DCMZ27C2SNA197 ....................53
DCMZ27C2SYA197 ....................57
DCMZ27H2PNK87 .....................66
DCMZ27H2PYK87 .....................70
DCMZ27H2SNA197 ....................67
DCMZ27H2SYA197 ....................71
DCMZ37PNK87 ........................6
DCMZ37SNA197 .......................7
DCMZ8C8PNK87 ......................52
DCMZ8C8PYK87 ......................56
DCMZ8C8SNA197 .....................53
DCMZ8C8SYA197 .....................57
DCMZ8H8PNK87 ......................66
DCMZ8H8PYK87 ......................70
DCMZ8H8SNA197 .....................67
DCMZ8H8SYA197 .....................71
DCNG37P-P1..........................4
DCNG37S-P1..........................5
DCNGE37P-P1.........................4
DCNGE37S-P1.........................5
DCNGL37P-P1.........................4
DCNGL37S-P1.........................5
DCNGX37P-P1.........................4
DCNGX37S-P1.........................5
DCNGZ37P-P1 .........................4
DCNGZ37S-P1 .........................5
DCW37P* ...........................38
DCW37P*G ..........................38
DCW37S* ...........................39
DCW37S*G ..........................39
DCWE37P* ..........................38
DCWE37P*G .........................38
DCWE37S* ..........................39
DCWE37S*G .........................39
DCX37P-0L2-K87-146 ..................10
DCX37PK87..........................32
DCX37S-0L2-A197-146 .................11
DCX37SA197 .........................33
DD-59-20 .......................195, 218
DD-60-20 .......................195, 218
DD115339-24 .......................205
DD115339-4 ........................207
DD115386-103A ......................195
DD121073-153.......................200
DD121073-53 .......................200
DD19678-161 ....................193, 1 95
DD19678-172........................195
DD19678-176........................195
DD19678-4 .........................204
DD19977-4 .........................204
DD19977-44.....................193, 1 95
DD20964...........................203
DD20964-19 ........................192
DD21961...........................214
DD21962...........................215
DD24661 ...........................203
DD24661-13 .....................192, 1 95
DD50908-1 .........................218
DD50P-0L2-K87 ......................10
DD50P-1A5N-K87 .....................26
DD50P-1A6N-K87 .....................26
DD50P-1A7N-K87 .....................22
DD50P-1A8N-K87 .....................22
DD50P-1A9N-K87 .....................22
DD50P-1ADN-K87 .....................24
DD50P-1AFN-K87 .....................22
DD50P-1AJN-K87 .....................24
DD50P-1AON-K87 .....................20
DD50P-1ATN-K87 .....................26
DD50P-1AUN-K87 .....................26
DD50P-1AVN-K87 .....................24
DD50P-1AWN-K87.....................24
DD50P-F179A-K87.....................12
DD50PK87 ..........................32
DD50S-0L2-A197 ......................11
DD50S-1A5N-A197 ....................27
DD50S-1A6N-A197 ....................27
DD50S-1A7N-A197 ....................23
DD50S-1A8N-A197 ....................23
DD50S-1A9N-A197 ....................23
DD50S-1ADN-A197 ....................25
DD50S-1AFN-A197 ....................23
DD50S-1AJN-A197 ....................25
DD50S-1AON-A197 ....................21
DD50S-1ATN-A197 ....................27
DD50S-1AUN-A197 ....................27
DD50S-1AVN-A197 ....................25
DD50S-1AWN-A197....................25
DD50S-F179A-A197 ....................13
DD50SA197..........................33
DD51216 ...........................206
DD51217 ...........................206
DD51223-1..........................210
DD53750-4 .........................218
DDA24W7PK87F0 .....................80
DDA24W7SA197F0 ....................81
DDA36W4PK87F0 .....................80
DDA36W4SA197F0 ....................81
DDE50P-0L2-K87-146 ..................10
DDE50PK87..........................32
DDE50S-0L2-A197-146 .................11
DDE50SA197.........................33
DDJK50P*-OL4 ......................120
DDJKE50P*-OL4 .....................120
DDJKE50P*-OL4-146..................120
DDJKX50P*-OL4 .....................120
DDJKX50P*-OL4-146..................120
DDM-24W7P-1A0N-K87 ................74
DDM-24W7P-1A7N-K87 ................74
DDM-24W7P-NMB-77 .................195
DDM-24W7P-NMC-76 .................195
DDM-24W7P-OL2-K87 .................76
DDM-24W7P-OL4-K87 .................76
DDM-24W7S-1A0N-A197................75
DDM-24W7S-1A7N-A197................75
DDM-24W7S-NMB-76 .................195
DDM-24W7S-NMC-76 .................195
DDM-24W7S-OL2-A197.................77
DDM-24W7S-OL4-A197.................77
DDM-36W4P-1A0N-K87 ................74
DDM-36W4P-1A7N-K87 ................74
DDM-36W4P-NMB-77 .................195
DDM-36W4P-OL2-K87 .................76
DDM-36W4P-OL4-K87 .................76
DDM-36W4S-1A0N-A197................75
DDM-36W4S-1A7N-A197................75
DDM-36W4S-NMB-77 .................195
DDM-36W4S-NMC-76 .................195
DDM-36W4S-OL2-A197.................77
DDM-36W4S-OL4-A197.................77
DDM-43W2P-1A0N-K87 ................74
DDM-43W2P-1A7N-K87 ................74
DDM-43W2P-OL2-K87 .................76
DDM-43W2P-OL4-K87 .................76
DDM-43W2S-1A0N-A197................75
DDM-43W2S-1A7N-A197................75
DDM-43W2S-NMB-77 .................195
DDM-43W2S-NMC-76 .................195
DDM-43W2S-OL2-A197.................77
DDM-43W2S-OL4-A197.................77
DDM-47W1P-1A0N-K87.................74
DDM-47W1P-1A7N-K87.................74
DDM-47W1P-OL2-K87..................76
DDM-47W1P-OL4-K87..................76
DDM-47W1S-1A0N-A197 ................75
DDM-47W1S-1A7N-A197 ................75
DDM-47W1S-NMC-76 .................195
DDM-47W1S-OL2-A197.................77
DDM-47W1S-OL4-A197.................77
DDM-50P-NMC-77....................195
DDM-50S-NMC-76....................195
DDM-50S-NMC-77....................195
DDM24W7P1A0NNMBK52 ..............195
DDM24W7P1A7NNMBK52 ..............195
DDM24W7P1A9NNMBK52 ..............195
DDM24W7PF179ANMBK52 .............195
DDM24W7PK87 ......................78
DDM24W7PNM ......................188
DDM24W7PNMB76 ...................195
DDM24W7PNMBK52 ..................195
DDM24W7POL3NMBK52 ...............195
DDM24W7S1A0NNMBK52 ..............195
DDM24W7S1A7NNMBK52 ..............195
DDM24W7S1A9NNMBK52 ..............195
DDM24W7SA197......................79
DDM24W7SF179ANMBK52 .............195
DDM24W7SNM ......................189
DDM24W7SNMB77 ...................195
DDM24W7SNMBK52 ..................195
DDM24W7SOL3NMBK52...............195
DDM36W4P1A0NNMBK52 ..............195
DDM36W4P1A7NNMBK52 ..............195
DDM36W4P1A9NNMBK52 ..............195
DDM36W4PF179ANMBK52 .............195
DDM36W4PK87 ......................78
DDM36W4PNM ......................188
DDM36W4PNMBK52 ..................195
DDM36W4POL3NMBK52 ...............195
DDM36W4S1A0NNMBK52 ..............195
DDM36W4S1A7NNMBK52 ..............195
DDM36W4S1A9NNMBK52 ..............195
R e a d e r ’ s R e s o u r c e
292
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DDM36W4SA197......................79
DDM36W4SF179ANMBK52 .............195
DDM36W4SNM ......................189
DDM36W4SNMB76 ...................195
DDM36W4SNMBK52 ..................195
DDM36W4SOL3NMBK52...............195
DDM43W2P-NMB-77..................195
DDM43W2P1A0NNMBK52 ..............195
DDM43W2P1A7NNMBK52 ..............195
DDM43W2P1A9NNMBK52 ..............195
DDM43W2PF179ANMBK52 .............195
DDM43W2PK87 ......................78
DDM43W2PNM ......................188
DDM43W2PNMBK52 ..................195
DDM43W2POL3NMBK52 ...............195
DDM43W2S1A0NNMBK52 ..............195
DDM43W2S1A7NNMBK52 ..............195
DDM43W2S1A9NNMBK52 ..............195
DDM43W2SA197......................79
DDM43W2SF179ANMBK52 .............195
DDM43W2SNM ......................189
DDM43W2SNMBK52 ..................195
DDM43W2SOL3NMBK52...............195
DDM47W1P-NMC-76 ..................195
DDM47W1P1A0NNMBK52 ..............195
DDM47W1P1A7NNMBK52 ..............195
DDM47W1P1A9NNMBK52 ..............195
DDM47W1PF179ANMBK52 .............195
DDM47W1PK87.......................78
DDM47W1PNM ......................188
DDM47W1PNMBK52 ..................195
DDM47W1POL3NMBK52 ...............195
DDM47W1S1A0NNMBK52 ..............195
DDM47W1S1A7NNMBK52 ..............195
DDM47W1S1A9NNMBK52 ..............195
DDM47W1SA197 ......................79
DDM47W1SF179ANMBK52 .............195
DDM47W1SNM ......................189
DDM47W1SNMBK52 ..................195
DDM47W1SOL3NMBK52 ...............195
DDM50P ...........................140
DDM50P1A0NNMBK52 ................195
DDM50P1A7NNMBK52 ................195
DDM50P1A9NNMBK52 ................195
DDM50PA ..........................132
DDM50PB ..........................136
DDM50PD ..........................132
DDM50PE ..........................136
DDM50PF ..........................134
DDM50PF179........................138
DDM50PF179A.......................138
DDM50PF179ANMBK52 ................195
DDM50PG ..........................132
DDM50PH ..........................136
DDM50PK ..........................134
DDM50PL ..........................132
DDM50PLNM........................174
DDM50PM ..........................136
DDM50PNM.........................180
DDM50PNM*1A7N....................178
DDM50PNM*1A9N....................178
DDM50PNM*1AON ...................176
DDM50PNMB76......................195
DDM50PNMB77......................195
DDM50PNMBK52.....................195
DDM50PNMC76......................195
DDM50POL3NM......................172
DDM50POL3NMBK52 .................195
DDM50PP ..........................134
DDM50PR ..........................134
DDM50PS ..........................132
DDM50PW..........................132
DDM50PX ..........................136
DDM50PZ ..........................136
DDM50S ...........................141
DDM50S1A0NNMBK52 ................195
DDM50S1A7NNMBK52 ................195
DDM50S1A9NNMBK52 ................195
DDM50SA ..........................133
DDM50SB ..........................137
DDM50SC ..........................135
DDM50SD ..........................133
DDM50SE ..........................137
DDM50SF ..........................135
DDM50SF179........................139
DDM50SF179A.......................139
DDM50SF179ANMBK52 ................195
DDM50SG ..........................133
DDM50SH ..........................137
DDM50SK ..........................135
DDM50SL ..........................133
DDM50SLNM........................175
DDM50SM ..........................137
DDM50SNM .........................181
DDM50SNM*1A7N....................179
DDM50SNM*1A9N....................179
DDM50SNM*1AON ...................177
DDM50SNMB76......................195
DDM50SNMB77......................195
DDM50SNMBK52 ....................195
DDM50SOL3NM......................173
DDM50SOL3NMBK52 .................195
DDM50SP ..........................135
DDM50SR ..........................135
DDM50SS ..........................133
DDM50SW..........................133
DDM50SX ..........................137
DDM50SZ ..........................137
DDMA50PNM........................182
DDMA50PNMBK52 ...................195
DDMA50SNM........................183
DDMA50SNMBK52 ...................195
DDMA78PNM........................184
DDMA78SNM........................185
DDMAY50PNM.......................182
DDMAY50SNM.......................183
DDMAY78PNM.......................184
DDMAY78SNM.......................185
DDMB-247S-NMB-76..................195
DDMB-50S-NMB-77...................195
DDMB-50S-NMC-77 ..................195
DDMB50S-NMB-76 ...................195
DDMB50S-NMC-76 ...................195
DDMC24C7PJK87 .....................46
DDMC24C7SJA197 ....................47
DDMC24H7PJK87 .....................62
DDMC24H7SJA197 ....................63
DDMC36C4PJK87 .....................46
DDMC36C4SJA197 ....................47
DDMC36H4PJK87 .....................62
DDMC36H4SJA197 ....................63
DDMC43C2PJK87 .....................46
DDMC43C2SJA197 ....................47
DDMC43H2PJK87 .....................62
DDMC43H2SJA197 ....................63
DDMC47C1PJK87 .....................46
DDMC47C1SJA197 ....................47
DDMC47H1PJK87 .....................62
DDMC47H1SJA197 ....................63
DDMC50PJK87 .......................16
DDMC50SJA197 ......................17
DDMD24C7PJK87 .....................46
DDMD24C7SJA197 ....................47
DDMD24H7PJK87 .....................62
DDMD24H7SJA197 ....................63
DDMD36C4PJK87 .....................46
DDMD36C4SJA197 ....................47
DDMD36H4PJK87 .....................62
DDMD36H4SJA197 ....................63
DDMD43C2PJK87 .....................46
DDMD43C2SJA197 ....................47
DDMD43H2PJK87 .....................62
DDMD43H2SJA197 ....................63
DDMD47C1PJK87 .....................46
DDMD47C1SJA197 ....................47
DDMD47H1PJK87 .....................62
DDMD47H1SJA197 ....................63
DDMD50PJK87 .......................16
DDMD50SJA197 ......................17
DDME24W7PK87 .....................78
DDME24W7SA197.....................79
DDME36W4PK87 .....................78
DDME36W4SA197.....................79
DDME43W2PK87 .....................78
DDME43W2SA197.....................79
DDME47W1PK87......................78
DDME47W1SA197 .....................79
DDME50P ..........................140
DDME50S...........................141
DDMG24C7PJK87 .....................46
DDMG24C7SJA197 ....................47
DDMG24H7PJK87 .....................62
DDMG24H7SJA197 ....................63
DDMG36C4PJK87 .....................46
DDMG36C4SJA197 ....................47
DDMG36H4PJK87 .....................62
DDMG36H4SJA197 ....................63
DDMG43C2PJK87 .....................46
DDMG43C2SJA197 ....................47
DDMG43H2PJK87 .....................62
DDMG43H2SJA197 ....................63
DDMG47C1PJK87 .....................46
DDMG47C1SJA197 ....................47
DDMG47H1PJK87 .....................62
DDMG47H1SJA197 ....................63
DDMG50PJK87 .......................16
DDMG50SJA197 ......................17
DDMM24W7P .......................166
DDMM36W4P .......................166
DDMM43W2P .......................166
DDMM47W1P .......................166
DDMM50P ..........................140
DDMM50PA .........................132
DDMM50PB .........................136
DDMM50PC.........................134
DDMM50PD.........................132
DDMM50PE .........................136
DDMM50PF .........................134
DDMM50PF179 ......................138
DDMM50PF179A .....................138
DDMM50PG.........................132
DDMM50PH.........................136
DDMM50PK .........................134
DDMM50PL .........................132
DDMM50PM ........................136
DDMM50PP .........................134
DDMM50PR.........................134
DDMM50PS .........................132
DDMM50PW ........................132
DDMM50PX .........................136
DDMM50PZ .........................136
DDMM50S ..........................141
DDMM50SA.........................133
DDMM50SB .........................137
DDMM50SC.........................135
DDMM50SD.........................133
DDMM50SE .........................137
DDMM50SF .........................135
DDMM50SF179 ......................139
DDMM50SF179A .....................139
DDMM50SG.........................133
DDMM50SH.........................137
DDMM50SK .........................135
DDMM50SL .........................133
DDMM50SM ........................137
DDMM50SP .........................135
DDMM50SR.........................135
DDMM50SS .........................133
DDMM50SW ........................133
DDMM50SX .........................137
DDMM50SZ .........................137
DDMMC24C7PJ ......................148
DDMMC24C7SJ......................149
DDMMC24H7PJ......................156
DDMMC24H7SJ......................157
DDMMC36C4PJ ......................148
DDMMC36C4SJ......................149
DDMMC36H4PJ......................156
DDMMC36H4SJ......................157
DDMMC43C2PJ ......................148
DDMMC43C2SJ......................149
DDMMC43H2PJ......................156
DDMMC43H2SJ......................157
DDMMC47C1PJ ......................148
DDMMC47C1SJ ......................149
DDMMC47H1PJ ......................156
DDMMC47H1SJ ......................157
DDMMD24C7PJ......................148
DDMMD24C7SJ......................149
DDMMD24H7PJ......................156
DDMMD24H7SJ......................157
DDMMD36C4PJ......................148
DDMMD36C4SJ......................149
DDMMD36H4PJ......................156
DDMMD36H4SJ......................157
DDMMD43C2PJ......................148
DDMMD43C2SJ......................149
DDMMD43H2PJ......................156
DDMMD43H2SJ......................157
DDMMD47C1PJ ......................148
DDMMD47C1SJ ......................149
DDMMD47H1PJ ......................156
DDMMD47H1SJ ......................157
DDMME24W7P ......................166
DDMME36W4P ......................166
DDMME43W2P ......................166
DDMME47W1P ......................166
DDMME50P .........................140
DDMME50S .........................141
DDMMG24C7PJ......................148
DDMMG24C7SJ......................149
DDMMG24H7PJ......................156
DDMMG24H7SJ......................157
DDMMG36C4PJ......................148
DDMMG36C4SJ......................149
DDMMG36H4PJ......................156
DDMMG36H4SJ......................157
DDMMG43C2PJ......................148
DDMMG43C2SJ......................149
DDMMG43H2PJ......................156
DDMMG43H2SJ......................157
DDMMG47C1PJ ......................148
DDMMG47C1SJ ......................149
DDMMG47H1PJ ......................156
DDMMG47H1SJ ......................157
DDMMN24C7PN .....................152
DDMMN24C7SN .....................153
DDMMN24H7PN .....................160
DDMMN24H7SN......................161
DDMMN24V7PN .....................164
DDMMN24V7SN .....................165
DDMMN36C4PN .....................152
DDMMN36C4SN .....................153
DDMMN36H4PN .....................160
DDMMN36H4SN......................161
DDMMN36V4PN .....................164
DDMMN36V4SN .....................165
DDMMN43C2PN .....................152
DDMMN43C2SN .....................153
DDMMN43H2PN .....................160
DDMMN43H2SN......................161
DDMMN43V2PN .....................164
DDMMN43V2SN .....................165
DDMMN47C1PN......................152
DDMMN47C1SN......................153
DDMMN47H1PN......................160
DDMMN47H1SN ......................161
DDMMN47V1PN......................164
DDMMN47V1SN......................165
DDMMP24C7PJ......................148
DDMMP24C7SJ ......................149
DDMMP24H7PJ ......................156
DDMMP24H7SJ ......................157
DDMMP36C4PJ......................148
DDMMP36C4SJ ......................149
DDMMP36H4PJ ......................156
DDMMP36H4SJ ......................157
DDMMP43C2PJ......................148
DDMMP43C2SJ ......................149
DDMMP43H2PJ ......................156
DDMMP43H2SJ ......................157
DDMMP47C1PJ ......................148
DDMMP47C1SJ ......................149
DDMMP47H1PJ ......................156
DDMMP47H1SJ ......................157
DDMMV24C7PN .....................152
DDMMV24C7SN .....................153
DDMMV24H7PN .....................160
DDMMV24H7SN......................161
DDMMV24V7PN......................164
DDMMV24V7SN......................165
DDMMV36C4PN .....................152
R e a d e r ’ s R e s o u r c e
293
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DDMMV36C4SN .....................153
DDMMV36H4PN .....................160
DDMMV36H4SN......................161
DDMMV36V4PN......................164
DDMMV36V4SN......................165
DDMMV43C2PN .....................152
DDMMV43C2SN .....................153
DDMMV43H2PN .....................160
DDMMV43H2SN......................161
DDMMV43V2PN......................164
DDMMV43V2SN......................165
DDMMV47C1PN......................152
DDMMV47C1SN......................153
DDMMV47H1PN......................160
DDMMV47H1SN ......................161
DDMMV47V1PN ......................164
DDMMV47V1SN ......................165
DDMMY24W7P ......................166
DDMMY36W4P ......................166
DDMMY43W2P ......................166
DDMMY47W1P ......................166
DDMMY50P .........................140
DDMMY50S .........................141
DDMMZ24C7PN......................152
DDMMZ24C7SN......................153
DDMMZ24H7PN......................160
DDMMZ24H7SN ......................161
DDMMZ24V7PN ......................164
DDMMZ24V7SN ......................165
DDMMZ36C4PN......................152
DDMMZ36C4SN......................153
DDMMZ36H4PN......................160
DDMMZ36H4SN ......................161
DDMMZ36V4PN ......................164
DDMMZ36V4SN ......................165
DDMMZ43C2PN......................152
DDMMZ43C2SN......................153
DDMMZ43H2PN......................160
DDMMZ43H2SN ......................161
DDMMZ43V2PN ......................164
DDMMZ43V2SN ......................165
DDMMZ47C1PN ......................152
DDMMZ47C1SN ......................153
DDMMZ47H1PN ......................160
DDMMZ47H1SN ......................161
DDMMZ47V1PN ......................164
DDMMZ47V1SN ......................165
DDMN24C7PNK87.....................54
DDMN24C7PYK87 .....................58
DDMN24C7SNA197 ....................55
DDMN24C7SYA197 ....................59
DDMN24H7PNK87.....................68
DDMN24H7PYK87.....................72
DDMN24H7SNA197 ....................69
DDMN24H7SYA197 ....................73
DDMN36C4PNK87.....................54
DDMN36C4PYK87 .....................58
DDMN36C4SNA197 ....................55
DDMN36C4SYA197 ....................59
DDMN36H4PNK87.....................68
DDMN36H4PYK87.....................72
DDMN36H4SNA197 ....................69
DDMN36H4SYA197 ....................73
DDMN43C2PNK87.....................54
DDMN43C2PYK87 .....................58
DDMN43C2SNA197 ....................55
DDMN43C2SYA197 ....................59
DDMN43H2PNK87.....................68
DDMN43H2PYK87.....................72
DDMN43H2SNA197 ....................69
DDMN43H2SYA197 ....................73
DDMN47C1PNK87 .....................54
DDMN47C1PYK87 .....................58
DDMN47C1SNA197 ....................55
DDMN47C1SYA197 ....................59
DDMN47H1PNK87 .....................68
DDMN47H1PYK87 .....................72
DDMN47H1SNA197 ....................69
DDMN47H1SYA197 ....................73
DDMN50PNK87........................6
DDMN50SNA197 .......................7
DDMP24C7PJK87 .....................46
DDMP24C7SJA197 ....................47
DDMP24H7PJK87 .....................62
DDMP24H7SJA197 ....................63
DDMP36C4PJK87 .....................46
DDMP36C4SJA197 ....................47
DDMP36H4PJK87 .....................62
DDMP36H4SJA197 ....................63
DDMP43C2PJK87 .....................46
DDMP43C2SJA197 ....................47
DDMP43H2PJK87 .....................62
DDMP43H2SJA197 ....................63
DDMP47C1PJK87 .....................46
DDMP47C1SJA197 ....................47
DDMP47H1PJK87 .....................62
DDMP47H1SJA197 ....................63
DDMP50PJK87 .......................16
DDMP50SJA197 ......................17
DDMV24C7PNK87.....................54
DDMV24C7PYK87 .....................58
DDMV24C7SNA197 ....................55
DDMV24C7SYA197 ....................59
DDMV24H7PNK87.....................68
DDMV24H7PYK87 .....................72
DDMV24H7SNA197 ....................69
DDMV24H7SYA197 ....................73
DDMV36C4PNK87.....................54
DDMV36C4PYK87 .....................58
DDMV36C4SNA197 ....................55
DDMV36C4SYA197 ....................59
DDMV36H4PNK87.....................68
DDMV36H4PYK87 .....................72
DDMV36H4SNA197 ....................69
DDMV36H4SYA197 ....................73
DDMV43C2PNK87.....................54
DDMV43C2PYK87 .....................58
DDMV43C2SNA197 ....................55
DDMV43C2SYA197 ....................59
DDMV43H2PNK87.....................68
DDMV43H2PYK87 .....................72
DDMV43H2SNA197 ....................69
DDMV43H2SYA197 ....................73
DDMV47C1PNK87 .....................54
DDMV47C1PYK87 .....................58
DDMV47C1SNA197 ....................55
DDMV47C1SYA197 ....................59
DDMV47H1PNK87 .....................68
DDMV47H1PYK87 .....................72
DDMV47H1SNA197 ....................69
DDMV47H1SYA197 ....................73
DDMV50PNK87 ........................6
DDMV50SNA197 .......................7
DDMY24W7PK87 .....................78
DDMY24W7PNM .....................188
DDMY24W7SA197.....................79
DDMY24W7SNM .....................189
DDMY36W4PK87 .....................78
DDMY36W4PNM .....................188
DDMY36W4SA197.....................79
DDMY36W4SNM .....................189
DDMY43W2PK87 .....................78
DDMY43W2PNM .....................188
DDMY43W2SA197.....................79
DDMY43W2SNM .....................189
DDMY47W1PK87......................78
DDMY47W1PNM .....................188
DDMY47W1SA197 .....................79
DDMY47W1SNM .....................189
DDMY50P ..........................140
DDMY50PNM........................180
DDMY50PNM*1AON ..................176
DDMY50POL3NM.....................172
DDMY50S ..........................141
DDMY50SNM ........................181
DDMY50SNM*1AON ..................177
DDMY50SOL3NM.....................173
DDMZ24C7PNK87 .....................54
DDMZ24C7PYK87 .....................58
DDMZ24C7SNA197 ....................55
DDMZ24C7SYA197 ....................59
DDMZ24H7PNK87 .....................68
DDMZ24H7PYK87 .....................72
DDMZ24H7SNA197 ....................69
DDMZ24H7SYA197 ....................73
DDMZ36C4PNK87 .....................54
DDMZ36C4PYK87 .....................58
DDMZ36C4SNA197 ....................55
DDMZ36C4SYA197 ....................59
DDMZ36H4PNK87 .....................68
DDMZ36H4PYK87 .....................72
DDMZ36H4SNA197 ....................69
DDMZ36H4SYA197 ....................73
DDMZ43C2PNK87 .....................54
DDMZ43C2PYK87 .....................58
DDMZ43C2SNA197 ....................55
DDMZ43C2SYA197 ....................59
DDMZ43H2PNK87 .....................68
DDMZ43H2PYK87 .....................72
DDMZ43H2SNA197 ....................69
DDMZ43H2SYA197 ....................73
DDMZ47C1PNK87 .....................54
DDMZ47C1PYK87 .....................58
DDMZ47C1SNA197 ....................55
DDMZ47C1SYA197 ....................59
DDMZ47H1PNK87 .....................68
DDMZ47H1PYK87 .....................72
DDMZ47H1SNA197 ....................69
DDMZ47H1SYA197 ....................73
DDMZ50PNK87 ........................6
DDMZ50SNA197 .......................7
DDNG50P-P1..........................4
DDNG50S-P1..........................5
DDNGE50P-P1.........................4
DDNGE50S-P1.........................5
DDNGL50P-P1.........................4
DDNGL50S-P1.........................5
DDNGX50P-P1.........................4
DDNGX50S-P1.........................5
DDNGZ50P-P1 .........................4
DDNGZ50S-P1 .........................5
DDX50P-0L2-K87-146 ..................10
DDX50PK87..........................32
DDX50S-0L2-A197-146 .................11
DDX50SA197.........................33
DE-59-20 .......................195, 218
DE-60-20 .......................195, 218
DE111805-1 .........................216
DE111805-5 .........................216
DE111813 ...........................216
DE111813-3.........................216
DE111919 ...........................215
DE111920...........................214
DE115339 ..........................207
DE115339-20........................205
DE115386-101A ......................195
DE115386-1B ........................207
DE121073-154.......................200
DE121073-54........................200
DE19977-47 .....................193, 1 95
DE19977-5 .........................204
DE24657 ...........................203
DE24657-16 .....................192, 1 95
DE44994 ...........................203
DE44994-2 .........................192
DE50904-1..........................218
DE51218 ...........................206
DE51219 ...........................206
DE51224-1..........................210
DE53750 ...........................218
DE9P-0L2-K87........................10
DE9P-1A5N-K87 ......................26
DE9P-1A6N-K87 ......................26
DE9P-1A7N-K87 ......................22
DE9P-1A8N-K87 ......................22
DE9P-1A9N-K87 ......................22
DE9P-1ADN-K87 ......................24
DE9P-1AFN-K87 ......................22
DE9P-1AJN-K87 ......................24
DE9P-1AON-K87 ......................20
DE9P-1ATN-K87 ......................26
DE9P-1AUN-K87 ......................26
DE9P-1AVN-K87 ......................24
DE9P-1AWN-K87 ......................24
DE9P-F179A-K87 ......................12
DE9PK87............................32
DE9S-0L2-A197 .......................11
DE9S-1A5N-A197 .....................27
DE9S-1A6N-A197 .....................27
DE9S-1A7N-A197 .....................23
DE9S-1A8N-A197 .....................23
DE9S-1A9N-A197 .....................23
DE9S-1ADN-A197 .....................25
DE9S-1AFN-A197......................23
DE9S-1AJN-A197......................25
DE9S-1AON-A197......................21
DE9S-1ATN-A197......................27
DE9S-1AUN-A197 .....................27
DE9S-1AVN-A197 .....................25
DE9S-1AWN-A197 .....................25
DE9S-F179A-A197 .....................13
DE9SA197 ...........................33
DEA9PK87FO.........................36
DEA9SA197FO ........................37
DEBS-9 ............................205
DEBU111515 .........................216
DEE9P-0L2-K87-146 ...................10
DEE9PK87...........................32
DEE9S-0L2-A197-146...................11
DEE9SA197 ..........................33
DEJK9P*-1A0N.......................110
DEJK9P*-1A5N.......................118
DEJK9P*-1A6N.......................118
DEJK9P*-1A7N.......................114
DEJK9P*-1A8N.......................114
DEJK9P*-1A9N.......................114
DEJK9P*-1ADN ......................116
DEJK9P*-1AFN.......................114
DEJK9P*-1AGN ......................116
DEJK9P*-1AHN ......................114
DEJK9P*-1AJN.......................116
DEJK9P*-1APN ......................118
DEJK9P*-1ATN.......................118
DEJK9P*-1AUN ......................118
DEJK9P*-1AVN ......................116
DEJK9P*-1AWN ......................116
DEJK9P*-1U0N ......................108
DEJK9P*-1U7N ......................112
DEJK9P*-1U7N-146 ...................112
DEJK9P*-OL4 .......................120
DEJK9S*-1A0N .......................111
DEJK9S*-1A5N.......................119
DEJK9S*-1A6N.......................119
DEJK9S*-1A7N.......................115
DEJK9S*-1A8N.......................115
DEJK9S*-1A9N.......................115
DEJK9S*-1ADN ......................117
DEJK9S*-1AFN.......................115
DEJK9S*-1AGN ......................117
DEJK9S*-1AHN ......................115
DEJK9S*-1AJN.......................117
DEJK9S*-1APN ......................119
DEJK9S*-1ATN.......................119
DEJK9S*-1AUN ......................119
DEJK9S*-1AVN ......................117
DEJK9S*-1AWN ......................117
DEJK9S*-1U0N ......................109
DEJK9S*-1U7N ......................113
DEJK9S*-1U7N-146 ...................113
DEJK9S*-OL4 .......................121
DEJKE9P*-1A0N......................110
DEJKE9P*-1U0N .....................108
DEJKE9P*-OL4 ......................120
DEJKE9P*-OL4-146 ...................120
DEJKE9S*-1A0N ......................111
DEJKE9S*-1U0N .....................109
DEJKE9S*-OL4 ......................121
DEJKE9S*-OL4-146 ...................121
DEJKX9P*-1A0N......................110
DEJKX9P*-OL4 ......................120
DEJKX9P*-OL4-146 ...................120
DEJKX9S*-1A0N ......................111
DEJKX9S*-OL4 ......................121
DEJKX9S*-OL4-146 ...................121
DEJT9P ............................122
DEJT9S* ...........................123
DEJTE9P ...........................122
DEJTE9S* ..........................123
DEJTX9P ...........................122
DEJTX9S* ..........................123
DEM-5W1P-1A0N-K87 ..................74
DEM-5W1P-1A7N-K87 ..................74
R e a d e r ’ s R e s o u r c e
294
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DEM-5W1P-NMB-76 ..................195
DEM-5W1P-NMB-77 ..................195
DEM-5W1P-NMC-76 ..................195
DEM-5W1P-OL2-K87 ...................76
DEM-5W1P-OL4-K87 ...................76
DEM-5W1S-1A0N-A197 .................75
DEM-5W1S-1A7N-A197 .................75
DEM-5W1S-NMB-77 ..................195
DEM-5W1S-NMC-76 ..................195
DEM-5W1S-OL2-A197 ..................77
DEM-5W1S-OL4-A197 ..................77
DEM-9P-NMB-76 .....................195
DEM-9S-NMB-76 .....................195
DEM-9S-NMC-77 .....................195
DEM5W1P1A0NNMBK52 ...............195
DEM5W1P1A7NNMBK52 ...............195
DEM5W1P1A9NNMBK52 ...............195
DEM5W1PF179ANMBK52...............195
DEM5W1PK87 ........................78
DEM5W1PNM .......................188
DEM5W1PNMBK52 ...................195
DEM5W1POL3NMBK52 ................195
DEM5W1S1A0NNMBK52 ...............195
DEM5W1S1A7NNMBK52 ...............195
DEM5W1S1A9NNMBK52 ...............195
DEM5W1SA197 .......................79
DEM5W1SF179ANMBK52...............195
DEM5W1SNM .......................189
DEM5W1SNMBK52 ...................195
DEM5W1SOL3NMBK52 ................195
DEM9P ............................140
DEM9P1A0NNMBK52..................195
DEM9P1A7NNMBK52..................195
DEM9P1A9NNMBK52..................195
DEM9PA ...........................132
DEM9PB ...........................136
DEM9PC ...........................134
DEM9PD ...........................132
DEM9PE............................136
DEM9PF............................134
DEM9PF179 .........................138
DEM9PF179A ........................138
DEM9PF179ANMBK52 .................195
DEM9PG ...........................132
DEM9PH ...........................136
DEM9PK ...........................134
DEM9PL............................132
DEM9PLNM .........................174
DEM9PM ...........................136
DEM9PNM ..........................180
DEM9PNM*1A7N .....................178
DEM9PNM*1A9N .....................178
DEM9PNM*1AON.....................176
DEM9PNMBK52......................195
DEM9PNMC76 .......................195
DEM9PNMC77 .......................195
DEM9POL3NM .......................172
DEM9POL3NMBK52...................195
DEM9PP ...........................134
DEM9PR ...........................134
DEM9PS ...........................132
DEM9PW ...........................132
DEM9PX ...........................136
DEM9PZ............................136
DEM9S.............................141
DEM9S1A0NNMBK52..................195
DEM9S1A7NNMBK52..................195
DEM9S1A9NNMBK52..................195
DEM9SA ...........................133
DEM9SB ...........................137
DEM9SC ...........................135
DEM9SD ...........................133
DEM9SE ...........................137
DEM9SF............................135
DEM9SF179 .........................139
DEM9SF179A ........................139
DEM9SF179ANMBK52 .................195
DEM9SG ...........................133
DEM9SH ...........................137
DEM9SK ...........................135
DEM9SL............................133
DEM9SLNM .........................175
DEM9SM ...........................137
DEM9SNM ..........................181
DEM9SNM*1A7N .....................179
DEM9SNM*1A9N .....................179
DEM9SNM*1AON.....................177
DEM9SNMB77 .......................195
DEM9SNMBK52......................195
DEM9SNMC76.......................195
DEM9SOL3NM.......................173
DEM9SOL3NMBK52...................195
DEM9SP ...........................135
DEM9SR ...........................135
DEM9SS ...........................133
DEM9SW ...........................133
DEM9SX ...........................137
DEM9SZ............................137
DEMA15PNM ........................184
DEMA15PNMBK47FO ..................195
DEMA15SNM ........................185
DEMA15SNMBK47FO ..................195
DEMA25PNMBK47FO..................195
DEMA25SNMBK47FO..................195
DEMA37PNMBK47FO..................195
DEMA37SNMBK47FO..................195
DEMA50PNMBK47FO..................195
DEMA50SNMBK47FO..................195
DEMA9PNM .........................182
DEMA9PNMBK47FO...................195
DEMA9PNMBK52.....................195
DEMA9SNM .........................183
DEMA9SNMBK47FO...................195
DEMA9SNMBK52.....................195
DEMAK15PNMBK47FO.................195
DEMAK15SNMBK47FO.................195
DEMAK25PNMBK47FO ................195
DEMAK25SNMBK47FO ................195
DEMAK37PNMBK47FO ................195
DEMAK37SNMBK47FO ................195
DEMAK50PNMBK47FO ................195
DEMAK9PNMBK47FO .................195
DEMAK9SNMBK47FO .................195
DEMAY15PNM .......................184
DEMAY15SNM .......................185
DEMAY9PNM ........................182
DEMAY9SNM ........................183
DEMB-5W1S-NMB-76 .................195
DEMB-9S-NMC-77....................195
DEMB9S-NMB-76 ....................195
DEMB9S-NMC-76 ....................195
DEMB9SNMB77......................195
DEMC5C1PJK87 ......................44
DEMC5C1PVK87 ......................50
DEMC5C1SJA197 .....................45
DEMC5C1SVA197 .....................51
DEMC5H1PJK87 ......................60
DEMC5H1SJA197......................61
DEMC5P1PVK87 ......................64
DEMC5P1SVA197 .....................65
DEMC9SJA197........................17
DEMCP9PJK87 .......................16
DEMD5C1PJK87 ......................44
DEMD5C1PVK87 ......................50
DEMD5C1SJA197 .....................45
DEMD5C1SVA197 .....................51
DEMD5H1PJK87 ......................60
DEMD5H1SJA197......................61
DEMD5P1PVK87 ......................64
DEMD5P1SVA197 .....................65
DEMD9PJK87 ........................16
DEMD9SJA197........................17
DEME5W1PK87 .......................78
DEME5W1SA197 ......................79
DEME9P............................140
DEME9S............................141
DEMG5C1PJK87 ......................44
DEMG5C1PVK87 ......................50
DEMG5C1SJA197 .....................45
DEMG5C1SVA197 .....................51
DEMG5H1PJK87 ......................60
DEMG5H1SJA197......................61
DEMG5P1PVK87 ......................64
DEMG5P1SVA197 .....................65
DEMG9PJK87 ........................16
DEMG9SJA197........................17
DEMM5W1P.........................166
DEMM5W1S.........................167
DEMM9P ...........................140
DEMM9PA ..........................132
DEMM9PB ..........................136
DEMM9PC ..........................134
DEMM9PD ..........................132
DEMM9PE ..........................136
DEMM9PF ..........................134
DEMM9PF179 .......................138
DEMM9PF179A ......................138
DEMM9PG ..........................132
DEMM9PH ..........................136
DEMM9PK ..........................134
DEMM9PL ..........................132
DEMM9PM..........................136
DEMM9PP ..........................134
DEMM9PR ..........................134
DEMM9PS ..........................132
DEMM9PW .........................132
DEMM9PX ..........................136
DEMM9PZ ..........................136
DEMM9S ...........................141
DEMM9SA ..........................133
DEMM9SB ..........................137
DEMM9SC ..........................135
DEMM9SD ..........................133
DEMM9SE ..........................137
DEMM9SF ..........................135
DEMM9SF179 .......................139
DEMM9SF179A ......................139
DEMM9SG ..........................133
DEMM9SH ..........................137
DEMM9SK ..........................135
DEMM9SL ..........................133
DEMM9SM..........................137
DEMM9SP ..........................135
DEMM9SR ..........................135
DEMM9SS ..........................133
DEMM9SW .........................133
DEMM9SX ..........................137
DEMM9SZ ..........................137
DEMMC5C1PJ .......................146
DEMMC5C1SJ .......................147
DEMMC5H1PJ .......................154
DEMMC5H1SJ .......................155
DEMMD5C1PJ .......................146
DEMMD5C1SJ .......................147
DEMMD5H1PJ .......................154
DEMMD5H1SJ .......................155
DEMME5W1P........................166
DEMME5W1S........................167
DEMME9P ..........................140
DEMME9S ..........................141
DEMMG5C1PJ .......................146
DEMMG5C1SJ .......................147
DEMMG5H1PJ .......................154
DEMMG5H1SJ .......................155
DEMMN5C1PN .......................150
DEMMN5C1SN .......................151
DEMMN5H1PN .......................158
DEMMN5H1SN .......................159
DEMMN5V1PN .......................162
DEMMN5V1SN .......................163
DEMMP5C1PJ .......................146
DEMMP5C1SJ .......................147
DEMMP5H1PJ .......................154
DEMMP5H1SJ .......................155
DEMMV5C1PN .......................150
DEMMV5C1SN .......................151
DEMMV5H1PN .......................158
DEMMV5H1SN .......................159
DEMMV5V1PN .......................162
DEMMV5V1SN .......................163
DEMMY5W1P........................166
DEMMY5W1S........................167
DEMMY9P ..........................140
DEMMY9S ..........................141
DEMMZ5C1PN .......................150
DEMMZ5C1SN .......................151
DEMMZ5H1PN .......................158
DEMMZ5H1SN .......................159
DEMMZ5V1PN .......................162
DEMMZ5V1SN .......................163
DEMN5C1PNK87 ......................52
DEMN5C1PYK87 ......................56
DEMN5C1SNA197 .....................53
DEMN5C1SYA197 .....................57
DEMN5H1PNK87 ......................66
DEMN5H1PYK87 ......................70
DEMN5H1SNA197 .....................67
DEMN5H1SYA197 .....................71
DEMN9PNK87 .........................6
DEMN9SNA197 ........................7
DEMP5C1PJK87 ......................44
DEMP5C1PVK87 ......................50
DEMP5C1SJA197......................45
DEMP5C1SVA197......................51
DEMP5H1PJK87 ......................60
DEMP5H1SJA197......................61
DEMP5P1PVK87 ......................64
DEMP5P1SVA197 .....................65
DEMP9PJK87.........................16
DEMP9SJA197........................17
DEMPPNMB77.......................195
DEMV5C1PNK87 ......................52
DEMV5C1PYK87 ......................56
DEMV5C1SNA197 .....................53
DEMV5C1SYA197 .....................57
DEMV5H1PNK87 ......................66
DEMV5H1PYK87 ......................70
DEMV5H1SNA197 .....................67
DEMV5H1SYA197......................71
DEMV9PNK87 .........................6
DEMV9SNA197 ........................7
DEMY5W1PK87 .......................78
DEMY5W1PNM ......................188
DEMY5W1SA197 ......................79
DEMY5W1SNM ......................189
DEMY9P ...........................140
DEMY9PNM .........................180
DEMY9PNM*1AON....................176
DEMY9POL3NM ......................172
DEMY9S............................141
DEMY9SNM .........................181
DEMY9SNM*1AON....................177
DEMY9SOL3NM......................173
DEMZ5C1PNK87 ......................52
DEMZ5C1PYK87 ......................56
DEMZ5C1SNA197 .....................53
DEMZ5C1SYA197......................57
DEMZ5H1PNK87 ......................66
DEMZ5H1PYK87 ......................70
DEMZ5H1SNA197 .....................67
DEMZ5H1SYA197......................71
DEMZ9PNK87 .........................6
DEMZ9SNA197 ........................7
DENG9P-P1 ...........................4
DENG9S-P1 ...........................5
DENGE9P-P1 ..........................4
DENGE9S-P1 ..........................5
DENGL9P-P1 ..........................4
DENGL9S-P1 ..........................5
DENGX9P-P1..........................4
DENGX9S-P1 ..........................5
DENGZ9P-P1 ..........................4
DENGZ9S-P1 ..........................5
DEW9P* ............................38
DEW9P*G ...........................38
DEW9S* ............................39
DEW9S*G ...........................39
DEWE9P* ...........................38
DEWE9P*G ..........................38
DEWE9S* ...........................39
DEWE9S*G ..........................39
DEX9P-0L2-K87-146 ...................10
DEX9PK87...........................32
DEX9S-0L2-A197-146...................11
DEX9SA197 ..........................33
DM115224-1010A .................191, 195
DM115224-1020A .................191, 195
DM115224-1040A .................191, 195
DM115224-2010A .................191, 195
DM115224-2020A.................191, 195
DM115224-2040A.................191, 195
DM115224-3010 ..................191, 195
R e a d e r ’ s R e s o u r c e
295
Dimensions are shown in mm (inch)
Dimensions subject to change
Part Number Page Part Number Page Part Number Page Part Number Page
D Subminiature Part Number Index
DM115224-3010A.....................191
DM115224-3020 ..................191, 195
DM115224-3020A ....................191
DM115224-3040 ..................191, 195
DM115224-3040A ....................191
DM115224-4010 ..................191, 195
DM115224-4010A.....................191
DM115224-4020 ..................191, 195
DM115224-4020A ....................191
DM115224-4040 ..................191, 195
DM115224-4040A ....................191
DM115740-12 .......................195
DM115740-13 .......................195
DM115740-19 .......................195
DM115740-5036 .....................195
DM115740-5046 .....................195
DM115740-5047 .....................195
DM115741-5032 .....................195
DM115741-5048 .....................195
DM115741-7 ........................195
DM115741-8 ........................195
DM115742-13 .......................195
DM115742-14 .......................195
DM115742-15 .......................195
DM115742-5028 .....................195
DM115742-5039 .....................195
DM115742-5075 .....................195
DM115743-20 .......................195
DM115743-22 .......................195
DM115743-5040 .....................195
DM115743-5064 .....................195
DM130321-3.........................92
DM130338...........................90
DM130338-1 .....................90, 1 9 1
DM130338-4 .........................90
DM130339...........................90
DM130339-1 .....................90, 1 9 1
DM130339-4 .........................90
DM130340...........................90
DM130340-1 .....................90, 1 9 1
DM130340-4 .........................90
DM130341...........................90
DM130341-1 .........................90
DM130341-4.........................90
DM130342...........................90
DM130342-1 .........................90
DM130342-4 .........................90
DM130343...........................90
DM130343-1 .........................90
DM130343-4 .........................90
DM130346-2 .........................92
DM130352-2 .........................92
DM130358-2 .........................92
DM13041-1..........................191
DM13042-1 .........................191
DM13043-1 .........................191
DM51155............................91
DM51155-12 .........................94
DM51155-13 .........................94
DM51155-5000 .......................91
DM51155-5004 .......................91
DM51155-5005 ......................195
DM51155-7 ......................91, 195
DM51157............................91
DM51157-13 .........................94
DM51157-14 .........................94
DM51157-5000 .......................91
DM51157-5005....................91, 195
DM51157-8 ......................91, 195
DM53740 ...........................86
DM53740-1 ..........................86
DM53740-15 .....................86, 1 95
DM53740-16 .....................86, 1 95
DM53740-17 .....................86, 1 95
DM53740-18 .....................86, 1 95
DM53740-3..........................86
DM53740-35.........................86
DM53740-36 ........................190
DM53740-5..........................86
DM53740-5000.......................86
DM53740-5001 .......................86
DM53740-5002.......................86
DM53740-5005.......................86
DM53740-5008.......................86
DM53740-5099.......................86
DM53740-5100 .......................86
DM53740-5101 .......................86
DM53740-5104 .......................86
DM53740-5105 .......................86
DM53740-5145 .......................86
DM53740-5147 ......................190
DM53741............................87
DM53741-1 ..........................87
DM53741-10 .....................87, 1 95
DM53741-11 .....................87, 1 95
DM53741-12 .....................87, 1 95
DM53741-13 .....................87, 1 95
DM53741-3 ..........................87
DM53741-4 ..........................87
DM53741-5000 .......................87
DM53741-5001 .......................87
DM53741-5003 .......................87
DM53741-5004 .......................87
DM53741-5059 .......................87
DM53741-5060 .......................87
DM53741-5062 .......................87
DM53741-5063 .......................87
DM53742 ...........................86
DM53742-1 ..........................86
DM53742-16 .....................86, 1 95
DM53742-17 .....................86, 1 95
DM53742-18 .....................86, 1 95
DM53742-19 .....................86, 1 95
DM53742-3..........................86
DM53742-36.........................86
DM53742-37 ........................190
DM53742-5..........................86
DM53742-5000.......................86
DM53742-5001 .......................86
DM53742-5002.......................86
DM53742-5004.......................86
DM53742-5006.......................86
DM53742-5085.......................86
DM53742-5086.......................86
DM53742-5089.......................86
DM53742-5091 .......................86
DM53742-5092.......................86
DM53742-5126 .......................86
DM53742-5127 ......................190
DM53743-16 .....................87, 1 95
DM53743-17 .....................87, 1 95
DM53743-18 .....................87, 1 95
DM53743-19 .....................87, 1 95
DM53743-2..........................87
DM53743-3..........................87
DM53743-5..........................87
DM53743-5000.......................87
DM53743-5001 .......................87
DM53743-5003.......................87
DM53743-5004.......................87
DM53743-5073.......................87
DM53743-5074.......................87
DM53743-5076.......................87
DM53743-5077.......................87
DM53743-6..........................87
DM53744-1 ..........................90
DM53744-107 ........................93
DM53744-21 .....................90, 1 9 1
DM53744-24 .....................90, 1 9 1
DM53744-25 .....................90, 1 9 1
DM53744-6..........................90
DM53744-62 ........................191
DM53744-63 ........................191
DM53744-64 ........................191
DM53744-7..........................90
DM53744-92.........................93
DM53744-95.........................93
DM53745-1 ..........................90
DM53745-104 ........................93
DM53745-107 ........................93
DM53745-120 ........................93
DM53745-126 ........................95
DM53745-25 .....................90, 1 9 1
DM53745-27 .....................90, 1 9 1
DM53745-28 .....................90, 1 9 1
DM53745-7..........................90
DM53745-70 ........................191
DM53745-72 ........................191
DM53745-77 ........................191
DM53745-8..........................90
M24308/26-1 .......................209
M24308/26-2 .......................209
M85049/48-1-1 ......................203
M85049/48-1-2 ......................203
M85049/48-1-3 ......................203
M85049/48-1-4 ......................203
M85049/48-1-5 ......................203
M85049/48-2-1 ......................203
M85049/48-2-2......................203
M85049/48-2-3......................203
M85049/48-2-4......................203
M85049/48-2-5......................203
M85049/48-3-2......................204
M85049/48-3-3......................204
M85049/48-3-4......................204
M85049/48-3-5......................204
M85049/50-1 .......................204
M85049/50-2 .......................204
M85049/50-3 .......................204
M85049/50-4 .......................204
M85049/50-5 .......................204
MDSM-15PE-Z10-VR22 .................99
MDSM-15SC-Z11-VS1..................100
MDSM-18PE-Z10-VR25 .................99
MDSM-25PE-Z10-VR17 .................99
MDSM-25SC-Z11-VS1 .................100
MDSM-30PE-Z10-VR22 .................99
MDSM-9PE-Z10-VR25 ..................99
MDSM-9SC-Z11-VS1 ..................100
ZDA15P-1AKN-146.....................28
ZDA15P-A191.........................34
ZDA15P-OL2 ..........................8
ZDA15S-1AKN-146.....................29
ZDA15S-A191.........................35
ZDA15S-OL2 ..........................9
ZDAE15P-OL2-146 ......................8
ZDAE15S-OL2-146 ......................9
ZDAL15P-1AKN-146....................28
ZDAL15S-1AKN-146....................29
ZDB25P-1AKN-146.....................28
ZDB25P-A191 ........................34
ZDB25P-OL2 ..........................8
ZDB25S-1AKN-146.....................29
ZDB25S-A191 ........................35
ZDB25S-OL2 ..........................9
ZDBE25P-OL2-146......................8
ZDBE25S-OL2-146......................9
ZDBL25P-1AKN-146....................28
ZDBL25S-1AKN-146....................29
ZDC37P-1AKN-146 ....................28
ZDC37P-A191 ........................34
ZDC37P-OL2 ..........................8
ZDC37S-1AKN-146 ....................29
ZDC37S-A191 ........................35
ZDC37S-OL2 ..........................9
ZDCE37P-OL2-146......................8
ZDCE37S-OL2-146......................9
ZDCL37P-1AKN-146....................28
ZDCL37S-1AKN-146....................29
ZDD50P-A191 ........................34
ZDD50P-OL2 ..........................8
ZDD50S-A191 ........................35
ZDD50S-OL2 ..........................9
ZDDE50P-OL2-146 .....................8
ZDDE50S-OL2-146 .....................9
ZDE9P-1AKN-146......................28
ZDE9P-A191..........................34
ZDE9P-OL2 ...........................8
ZDE9S-1AKN-146......................29
ZDE9S-A191..........................35
ZDE9S-OL2 ...........................9
ZDEE9P-OL2-146.......................8
ZDEE9S-OL2-146.......................9
ZDEL9P-1AKN-146.....................28
ZDEL9S-1AKN-146.....................29
ZEDA15PBA ..........................18
ZEDA15SBA ..........................19
ZEDAL15PBA .........................18
ZEDAL15SBA .........................19
ZEDB25PBA ..........................18
ZEDB25SBA..........................19
ZEDBL25PBA .........................18
ZEDBL25SBA .........................19
ZEDC37PBA ..........................18
ZEDC37SBA ..........................19
ZEDCL37PBA .........................18
ZEDCL37SBA.........................19
ZEDE9PBA ...........................18
ZEDE9SBA ...........................19
ZEDEL9PBA ..........................18
ZEDEL9SBA ..........................19
R e a d e r ’ s R e s o u r c e
296
Dimensions are shown in mm (inch)
Dimensions subject to change 297
Product Safety Information
THIS NOTE MUST BE READ IN CONJUNCTION
WITH THE PRODUCT DATA SHEET/CATALOG.
FAILURE TO OBSERVE THE ADVICE IN THIS
INFORMATION SHEET AND THE OPERATING
CONDITIONS SPECIFIED IN THE PRODUCT DATA
SHEET/CATALOG COULD RESULT IN
HAZARDOUS SITUATIONS.
1 MATERIAL CONTENT AND PHYSICAL FORM
Electrical connectors do not usually contain
hazardous materials. They contain conducting
and non-conducting materials and can be
divided into two groups.
a) Printed circuit types and low cost audio types
which employ all plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types
with metal casings and either natural rubber,
synthetic rubber, plastic or glass insulating
materials. Contact materials vary with type of
connector and also application and are usually
manufactured from either: Copper, copper
alloys, nickel, alumel, chromel or steel. In
special applications, other alloys may be
specified.
2 FIRE CHARACTERISTICS AND ELECTRIC
SHOCK HAZARD
There is no fire hazard when the connector is
correctly wired and used within the specified
parameters. Incorrect wiring or assembly of
the connector or careless use of metal tools or
conductive fluids, or transit damage to any of
the component parts may cause electric
shock or burns. Live circuits must not be
broken by separating mated connectors as
this may cause arcing, ionisation and burning.
Heat dissipation is greater at maximum
resistance in a circuit. Hot spots may occur
when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken
strands of wire. Local overheating may also
result from the use of the incorrect application
tools or from poor quality soldering or slack
screw terminals. Overheating may occur if the
ratings in the product Data Sheet/Catalog are
exceeded and can cause breakdown of
insulation and hence electric shock.
If heating is allowed to continue it intensifies by
further increasing the local resistance through
loss of temper of spring contacts, formation of
oxide film on contacts and wires and leakage
currents through carbonisation of insulation and
tracking paths. Fire can then result in the
presence of combustible materials and this may
release noxious fumes. Overheating may not be
visually apparent. Burns may result from
touching overheated components.
3 HANDLING
Care must be taken to avoid damage to any
component parts of electrical connectors
during installation and use. Although there are
normally no sharp edges, care must be taken
when handling certain components to avoid
injury to fingers.
Electrical connectors may be damaged in transit
to the customers, and damage may result in
creation of hazards. Products should therefore
be examined prior to installation/use and
rejected if found to be damaged.
4 DISPOSAL
Incineration of certain materials may release
noxious or even toxic fumes.
5 APPLICATION
Connectors with exposed contacts should not
be selected for use on the current supply side of
an electrical circuit, because an electric shock
could result from touching exposed contacts on
an unmated connector. Voltages in excess of 30
V ac or 42.5 V dc are potentially hazardous and
care should be taken to ensure that such
voltages cannot be transmitted in any way to
exposed metal parts of the connector body. The
connector and wiring should be checked, before
making live, to have no damage to metal parts or
insulators, no solder blobs, loose strands,
conducting lubricants, swarf, or any other
undesired conducting particles. Circuit
resistance and continuity check should be
made to make certain that there are no high
resistance joints or spurious conducting paths.
Always use the correct application tools as
specified in the Data Sheet/Catalog.
Do not permit untrained personnel to wire,
assemble or tamper with connectors. For
operation voltage please see appropriate
national regulations.
IMPORTANT GENERAL INFORMATION
(i) Air and creepage paths/Operating voltage
The admissible operating voltages depend on the
individual applications and the valid national and
other applicable safety regulations.
For this reason the air and creepage path data are
only reference values. Observe reduction of air and
creepage paths due to PC board and/or
harnessing.
(ii) Temperature
All information given are temperature limits. The
operation temperature depends on the individual
application.
(iii) Other important information
ITT Cannon continuously endeavours to improve
their products. Therefore, ITT Cannon products
may deviate from the description, technical data
and shape as shown in this catalog and data
sheets.
ITT Cannon manufactures the highest quality products available in the marketplace; however these products are intended to be
used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating
specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to
create any liability on the part of ITT Cannon. Any new issue of this publication shall automatically invalidate and supersede any and
all previous issues. A limited warranty applies to ITT Cannon products. Except for obligations assumed by ITT Cannon under
this warranty, ITT Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any
kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with
the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively
subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This
publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, ITT Cannon
does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its
use. Reprinting this publication is generally permitted, indicating the source. However, ITT Cannon’s prior consent must be
obtained in all cases.
R e a d e r ’ s R e s o u r c e
297
WE’RE PART OF YOUR WORLD
IN INTERCONNECT TECHNOLOGY
We are focused on your world with Innovation, Experience, Reliability & Responsiveness.
I
INNOVATION
A commitment to concurrent engineering
helps you reach your markets faster
Let us bring our spirit of innovation to
your world. Experienced engineering
teams located throughout the globe work
hand-in-hand with our customers. And
since these teams are thoroughly
networked together, you benefit from 24
hour-a-day concurrent engineering
capability. These teams advance your
project from initial product concepts to
final design and into production.
Our teams are experts in computer-
based design, modeling and analysis to
assure robust product designs. We are
also well-versed in performance
simulation, as well as verification of
mechanical and electrical properties.
ITT Cannon utilizes Pro/ENGINEER*
software which allows us to develop
products and manufacturing processes
concurrently, and to easily evaluate
multiple design alternatives. This means
better designed products, produced
faster and at a lower cost.
ITT Cannon’s Integrated Product
Development process (IPD) allows us to
minimize cycle time for first article and
volume production.
*A trademark of Parametric Technology Corp.
Today, we serve nearly every
industry in which the increased demand
for reliable and innovative interconnect
systems is critical:
Computers (Personal computers,
portables and peripherals)
Telecommunications (Network
systems and services/LAN; mobile)
Transportation (Automobiles, heavy-
duty vehicles, rail and mass transit)
Military/Aerospace (Commercial and
military aircraft, defense and space)
Industrial (Factory automation and
instrumentation)
Medical (Diagnostic equipment)
Broadcasting
Consumer Products
As ITT Cannon begins our ninth decade
in business, we are proud to provide our
global and regional customers with the
most reliable electronic products and
services available:
Interconnects and cable assemblies
RF connectors
Switches and conductive rubber
switchpads
Test accessories
I/O card, memory card and smart
card interconnects
Local area network components
(copper and fiber optic)
Turn-key network systems and
services
Customer use tooling
Don’t blink.
No industry in the world moves
faster than electronics. Take a
snapshot of it today, and it all
changes by tomorrow.
When you need to bring your
products to market more quickly,
you most likely seek a partner who
moves just as fast as you do. A
company at the forefront with the
latest in products and service.
At ITT Cannon, we have made it
our business to understand your world.
Or should we say, the many parts of your
world:
The places in the world where you do
business.
The products you bring to the world.
The service you require from
suppliers to compete in the world.
At ITT Cannon, we are proud of a
heritage that helped pioneer the
electronics industry from its infancy in
the early part of this century, to the
highly advanced technologies of the
present.
II
EXPERIENCE
Worldwide capacity to meet all of your
delivery requirements
Our decades of manufacturing
experience, help us bring the latest
products to your world. With automated
manufacturing capacity strategically
located in North America, Europe and
Asia, we can produce products in either
large or small quantities to quickly meet
your exact requirements.
ITT Cannon is able to modify existing
products to suit special customer
requirements. With global
manufacturing capacity in every
continent, we are also able to source
product from the location that best suits
your needs. This means we have the
flexibility to select the most
advantageous shipping methods and
other logistical options.
ITT Cannon has established Centers of
Excellence for world class capabilities
such as: Machining, stamping, surface
plating, molding, cable assembly and
network systems technology — all
utilizing the most advanced CAM
equipment.
III
RELIABILITY
We don’t stop at ‘‘world class quality’’ —
Continuous improvement is our standard
Our goal is to bring world class
electronics to your world. This
commitment to perfection has helped
ITT Cannon’s global facilities earn ISO
9000 certification. We have invested in
world class process controls for both
assembly and component
manufacturing.
ITT Cannon has also met or exceeded
the quality system requirements from all
customers who have conducted audits.
We participate in ship-to-stock programs
with many of these customers worldwide
and have received numerous quality and
preferred supplier awards from
customers throughout the world in each
of the industries we serve.
IV
RESPONSIVENESS
A singular focus on responding to your
needs
We know that to be responsive, we must
know your world inside and out: your
particular company, your industry and
your challenges. Each of ITT Cannon’s
thousands of employees worldwide is
focused on responding to you with
timely and dependable information —
and on ensuring that we keep the
commitments we make. For instance, our
globally linked computer system tracks
the status of your order anywhere in the
world.
You also benefit from our field
applications and sales network, which
provides industry-specific knowledge to
help you design in the best product for
your application.
Our distribution network is one of the
most extensive in the industry, and can
provide you off-the-shelf product to
meet the most challenging delivery
requirements.
V
AN INVITATION
TO SHARE
YOUR WORLD
Innovation. Experience. Reliability.
Responsiveness.
At ITT Cannon, these are the strengths
that we bring to our customers each and
every day. Just as we have for nearly nine
decades. We pride ourselves on a level of
service and manufacturing know-how
that has enabled us to lead our industry.
Exceeding your expectations — not just
meeting them — is how we approach
every project.
With the world moving faster all the
time, ITT Cannon is a partner who can
help you get your products to market not
just on time, but ahead of the
competition.
At ITT Cannon, we realize that each
customer we serve has their own special
needs and expectations. That is why we
would welcome the opportunity to
discuss your project, your company, your
industry — yes, your world.