General Description
The MAX4580/MAX4590/MAX4600 dual analog switches
feature low on-resistance of 1.25Ωmax. On-resistance is
matched between switches to 0.25Ωmax and is flat
(0.3Ωmax) over the specified signal range. Each switch
can handle Rail-to-Rail®analog signals. The off-leakage
current is only 2.5nA max at +85°C. These analog
switches are ideal in low-distortion applications and are
the preferred solution over mechanical relays in automat-
ic test equipment or applications where current switching
is required. They have low power requirements, require
less board space, and are more reliable than mechanical
relays.
The MAX4580 has two NC (normally closed) switches,
the MAX4590 has two NO (normally open) switches,
and the MAX4600 has one NC (normally closed) and
one NO (normally open) switch.
These switches operate from a +4.5V to +36V single
supply or from ±4.5V to ±20V dual supplies. All digital
inputs have +0.8V and +2.4V logic thresholds, ensuring
TTL/CMOS-logic compatibility when using a +12V sin-
gle supply or ±15V dual supplies.
Applications
Reed Relay Replacement
Test Equipment
Communication Systems
PBX, PABX Systems
Features
♦Low On-Resistance (1.25Ωmax)
♦Guaranteed RON Match Between Channels
(0.25Ωmax)
♦Guaranteed RON Flatness Over Specified
Signal Range (0.3Ωmax)
♦Rail-to-Rail Signal Handling
♦Guaranteed ESD Protection >2kV per
Method 3015.7
♦Single-Supply Operation: +4.5V to +36V
Dual-Supply Operation: ±4.5V to ±20V
♦TTL/CMOS-Compatible Control Inputs
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
________________________________________________________________ Maxim Integrated Products 1
TOP VIEW
N.C. = NOT INTERNALLY CONNECTED
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
NC1
N.C.
COM1
V+
V-
N.C.
IN1
N.C.
VL
COM2
N.C.
NC2
N.C.
IN2
N.C.
GND
SSOP/SO/DIP
MAX4580
LOGIC SWITCH
0
1
ON
OFF
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
N01
N.C.
COM1
V+
V-
N.C.
IN1
N.C.
VL
COM2
N.C.
NO2
N.C.
IN2
N.C.
GND
SSOP/SO/DIP
MAX4590
LOGIC SWITCH
0
1
OFF
ON
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
N01
N.C.
COM1
V+
V-
N.C.
IN1
N.C.
VL
COM2
N.C.
NC1
N.C.
IN2
N.C.
GND
SSOP/SO/DIP
MAX4600
LOGIC SWITCH 1
0
1
OFF
ON
SWITCH 2
ON
OFF
19-1394; Rev 1; 6/03
PART
MAX4580CAE
MAX4580CWE
MAX4580CPE 0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP RANGE PIN-PACKAGE
16 SSOP
16 Wide SO
16 Plastic DIP
Ordering Information continued at end of data sheet.
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
Pin Configurations/Functional Diagrams/Truth Tables
Ordering Information
MAX4580EAE -40°C to +85°C 16 SSOP
MAX4580EWE -40°C to +85°C 16 Wide SO
MAX4580EPE -40°C to +85°C 16 Plastic DIP
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V+ to GND ..............................................................-0.3V to +44V
V- to GND ...............................................................+0.3V to -44V
V+ to V-...................................................................-0.3V to +44V
VLto GND.................................................... -0.3V to (V+ + 0.3V)
All Other Pins to GND (Note 1) ........... (V- - 0.3V) to (V+ + 0.3V)
Continuous Current (COM_, NO_, NC_) ....................... ±200mA
Peak Current (COM_, NO_, NC_)
(pulsed at 1ms, 10% duty cycle) .............................. ±300mA
Continuous Power Dissipation (TA= +70°C)
16 SSOP (derate 7.1mW/°C above +70°C) .................571mW
16 Wide SO (derate 9.52mW/°C above +70°C) ..........762mW
16 Plastic DIP (derate 10.53mW/°C above +70°C) .....842mW
Operating Temperature Ranges
MAX4_ _0C_E ....................................................0°C to +70°C
MAX4_ _0E_E ..................................................-40°C to +85°C
Storage Temperature Range ........................... -65°C to +160°C
Lead Temperature (soldering, 10sec) ............................+300°C
-2.5 2.5
-2.5 2.5
-5 5
TA= TMIN to TMAX
V
TA= +25°C
V- V+
VCOM_, VNO_,
VNC_
Input Voltage Range
(Note 3)
IN_ = 0.8V, all others = 2.4V
IN_ = 2.4V, all others = 0.8V
ICOM_ = 10mA,
VNO_ or VNC_ = ±10V,
TA= +25°C
TA= +25°C
TA= +25°C
CONDITIONS
Ω
0.05 0.25
∆RON
COM_ to NO_ or NC_
On-Resistance Match Between
Channels (Note 4)
Ω
0.9 1.25
RON
COM_ to NO or NC_
On-Resistance
-0.500 0.001 0.500
IIN_L
Input Current with Input Voltage
Low
µA
-0.500 0.001 0.500
IIN_H
Input Current with Input Voltage
High
Ω
0.06 0.3
RFLAT(ON)
COM_ to NO_ or NC_
On-Resistance Flatness
(Note 5)
nA
-0.5 0.01 0.5
INO_,I
NC_
Off-Leakage Current
(NO_ or NC_) (Note 6)
nA
-0.5 0.01 0.5
ICOM_(OFF)
COM_ Off-Leakage Current
(Note 6)
nA
-1 0.01 1
ICOM_(ON)
COM_ On-Leakage Current
(Note 6)
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
ICOM_ = 10mA,
VNO_ or VNC_= ±10V
ICOM_ = 10mA; VNO_
or VNC_ = -5V, 0, +5V
TA= +25°C
VCOM_ = ±10V,
VNO_ or VNC_ = –
+10V
VCOM_ = ±10V,
VNO_ or VNC_ = –
+10V
VCOM_ = ±10V,
VNO_ or VNC_= ±10V,
or floating
TA= +25°C
TA= TMIN to TMAX
1.5
0.5
TA= TMIN to TMAX 0.5
TA= TMIN to TMAX
TA= TMIN to TMAX
TA= TMIN to TMAX
ELECTRICAL CHARACTERISTICS–Dual Supplies
(V+ = +15V, V- = -15V, VL= +5V, VIN_H = +2.4V, VIN_L = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.)
Note 1: Signals on NC_, NO_, COM_, or IN_ exceeding V+ or V- are clamped by internal diodes. Limit forward diode current to
maximum current rating.
ANALOG SWITCH
LOGIC INPUT
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
_______________________________________________________________________________________ 3
TA= TMIN to TMAX
VIN_ = 0 or +5V µA
TA= +25°C
-0.5 0.01 0.5
I+Positive Supply Current TA= +25°C
f = 1MHz, Figure 6, TA= +25°C
RL= 50Ω, CL = 5pF, f = 1MHz,
Figure 5, TA= +25°C
TA= TMIN to TMAX 55
RL= 50Ω, CL = 5pF, f = 1MHz,
Figure 4, TA= +25°C
CL = 1.0nF, VGEN = 0, RGEN = 0,
Figure 3, TA= +25°C
VIN_ = 0 or +5V
TA= +25°C
f = 1MHz, Figure 6, TA= +25°C
CONDITIONS
pF
dB
f = 1MHz, Figure 7, TA= +25°C pF520C(COM)
On-Capacitance
115C(COM)
COM Off-Capacitance
-0.5 0.01 0.5
IL
Logic Supply Current
-0.5 0.01 0.5
I-Negative Supply Current
pF115C(OFF)
NC_ or NO_ Capacitance
-65VCT
Crosstalk (Note 8)
dB-53VISO
Off-Isolation (Note 7)
pC-60QCharge Injection
-0.5 0.01 0.5
IGND
Ground Current
ns
160
tON
Turn-On Time
ns
210
tOFF
Turn-Off Time
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
VIN_ = 0 or +5V
VIN_ = 0 or +5V
TA= +25°C
Figure 2, VCOM_ = ±10V, TA= +25°C
Figure 2, VCOM_ = ±10V, TA= +25°C
TA= TMIN to TMAX
55
55
TA= TMIN to TMAX 55
ELECTRICAL CHARACTERISTICS–Dual Supplies (continued)
(V+ = +15V, V- = -15V, VL= +5V, VIN_H = +2.4V, VIN_L = +0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.)
µA
µA
µA
V2.4 1.7VIN_H
Logic Input High Voltage
V1.7 0.8VIN_L
Logic Input Low Voltage
V±4.5 ±20.0Power-Supply Range
POWER SUPPLY
SWITCH DYNAMIC CHARACTERISTICS
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
4 _______________________________________________________________________________________
-2.5 2.5
-2.5 2.5
-10 10
TA= TMIN to TMAX
V
TA= +25°C
GND V+
VCOM_, VNO_,
VNC_
Input Voltage Range
(Note 3)
IN_ = 2.4V, all others = 0.8V
+4.5 +36.0
IN_ = 0.8V, all others = 2.4V
ICOM_ = 10mA,
VNO_ or VNC_ = +10V,
V+ = 12V
TA= +25°C
TA= +25°C
TA= +25°C
CONDITIONS
Power-Supply Range
VIN_ = 0 or +5V
VIN_ = 0 or +5V -0.5 0.001 0.5
IL
Logic Supply Current
µA
-0.5 0.001 0.5
I+Positive Supply Current
V
µA
VIN_ = 0 or +5V -0.5 0.001 0.5
IGND
Ground Current µA
TA= +25°C
TA= +25°C
TA= TMIN to TMAX
TA= +25°C
TA= TMIN to TMAX
TA= TMIN to TMAX
55
55
55
0.8VIN_L
Logic Input Low Voltage
Ω
0.4
∆RON
COM_ to NO_ or NC_
On-Resistance Match Between
Channels (Note 4)
Ω
1.6 3
RON
COM_ to NO_ or NC_
On-Resistance
V2.4VIN_H
Logic Input High Voltage
-0.500 0.001 0.500
IIN_H
Input Current with Input Voltage
Low
µA
-0.500 0.001 0.500
IIN_L
Input Current with Input Voltage
High
Ω
0.4
RFLAT(ON)
COM_ to NO_ or NC_
On-Resistance Flatness
(Note 5)
nA
-0.5 0.01 0.5
INO_,I
NC_
Off-Leakage Current
(NO_ or NC_) (Notes 6, 9)
nA
-0.5 0.01 0.5
ICOM_(OFF)
COM_ Off-Leakage Current
(Notes 6, 9)
nA
-1 0.02 1
ICOM_(ON)
COM_ On-Leakage Current
(Notes 6, 9)
UNITS
MIN TYP MAX
(Note 2)
SYMBOLPARAMETER
ICOM_ = 10mA, VNO_
or VNC_ = +10V
ICOM_ = 10mA; VNO_
or VNC_ = +3V, +6V,
+9V
TA= +25°C
VCOM_ = 1V, +10V;
VNO_ or VNC_ = +10V,
+1V
VNO_ or VNC_ = +10V,
+1V; VCOM_ = +1V,
+10V
VCOM_ = +1V, +10V;
VNO_ or VNC_ = +1V,
+10V, or floating
TA= +25°C
TA= TMIN to TMAX
3.5
0.5
TA= TMIN to TMAX 0.5
TA= TMIN to TMAX
TA= TMIN to TMAX
TA= TMIN to TMAX
ELECTRICAL CHARACTERISTICS–Single Supply
(V+ = +12V, V- = 0, VL= +5V, VINH = 2.4V, VINL = 0.8V, TA= TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.)
µA
V
ANALOG SWITCH
LOGIC INPUT
POWER SUPPLY
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
_______________________________________________________________________________________ 5
ELECTRICAL CHARACTERISTICS—Single Supply (continued)
(V+ = +12V, V- = 0, VL= +5V, VIN_H = 2.4V, VIN_L = 0.8V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA= +25°C.)
Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ∆RON = RON(MAX) - RON(MIN).
Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the
specified analog signal range.
Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.
Note 7: Off-isolation = 20 log10 [VCOM / (VNC or VNO)], VCOM = output, VNC or VNO = input to off switch.
Note 8: Between any two switches.
Note 9: Leakage testing at single supply is guaranteed by testing with dual supplies.
RL= 50Ω, CL = 5pF, f = 1MHz,
Figure 5, TA= +25°C
CL = 1.0nF, VGEN = 0, RGEN = 0,
Figure 3, TA= +25°C
VCOM_ = +10V, Figure 2, TA= +25°C
PARAMETER SYMBOL MIN TYP MAX
(Note 2) UNITS
Crosstalk (Note 8) VCT -65 dB
Charge Injection Q40 pC
Turn-Off Time tOFF 200 ns
Turn-On Time tON 150 nsVCOM_ = +10V, Figure 2, TA= +25°C
f = 1MHz, Figure 7, TA= +25°COn-Capacitance C(COM)_ 275 pF
f = 1MHz, Figure 6, TA= +25°CCOM Off-Capacitance
CONDITIONS
C(COM)_ 175
f = 1MHz, Figure 6, TA= +25°CNC_ or NO_ Capacitance C(OFF)_ 175 pF
pF
SWITCH DYNAMIC CHARACTERISTICS
0
0.5
1.0
1.5
2.0
2.5
-20 -12 -8-16 -4 0 4 8 12 16 20
ON-RESISTANCE vs. VCOM
(DUAL SUPPLIES)
MAX4580 TOC01
VCOM (V)
RON (Ω)
V+, V- = ±5.0V
V+, V- = ±15.0V
V+, V- = ±20.0V
ON-RESISTANCE vs. VCOM
AND TEMPERATURE (DUAL SUPPLIES)
MAX4580 TOC02
VCOM (V)
RON (Ω)
129-12 -9 -6 0 3-3 6
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
0.4
-15 15
V+, V- = ±15V
TA = +85°C
TA = -40°C
TA = +25°C
ON-RESISTANCE vs. VCOM
(SINGLE SUPPLY)
MAX4580 TOC03
VCOM (V)
RON (Ω)
222018161412108642
1
2
3
4
5
0
024
V- = 0
V+ = +5V
V+ = +12V
V+ = +24V
Typical Operating Characteristics
(Circuit of Figure 1, TA = +25°C, unless otherwise noted.)
Typical Operating Characteristics (continued)
(Circuit of Figure 1, TA= +25°C, unless otherwise noted.)
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
6 _______________________________________________________________________________________
ON-RESISTANCE vs. VCOM
AND TEMPERATURE (SINGLE SUPPLY)
MAX4580 TOC04
VCOM (V)
RON (Ω)
11108 92 3 4 5 6 71
0.25
0.50
0.75
1.00
1.25
1.50
1.75
2.00
2.25
0
012
V+ = +12V
V- = GND
TA = +85°C
TA = +25°C
TA = -40°C
0.001
0.01
0.1
1
100
10
1000
-40 0 20-20 40 60 80 100
POWER-SUPPLY CURRENT
vs. TEMPERATURE
MAX4580 TOC07
TEMPERATURE (°C)
I+, I- (nA)
I+ I-
10,000
0.001
0.1
0.01
1
10
-40 0 20-20 40 60 80 100
ON/OFF-LEAKAGE
vs. TEMPERATURE
MAX4580 TOC05
TEMPERATURE (°C)
LEAKAGE (nA)
ON-LEAKAGE
V+ = +15V
V- = -15V
OFF-LEAKAGE
-500
-300
0
200
400
-400
-100
100
300
500
-15 -5 0-10 5 15
CHARGE INJECTION
vs. VCOM
MAX4580 TOC06
VCOM (V)
Q (pC)
10
-200
V+ = +15V
V- = -15V
V+ = +15V
V- = 0
0
-100
0.01 1 100.1 100
FREQUENCY RESPONSE
-80
MAX4580 TOC 08
FREQUENCY (MHz)
LOSS (dB)
PHASE (degrees)
-60
-40
-20
-90
-70
-50
-30
-10
+180
-720
-540
-360
-180
0
-630
-450
-270
-90
+90
V+, V- = 15V
INPUT = 0dBm
50Ω IN AND OUT
OFF-ISOLATION
ON-PHASE
ON-RESPONSE
50
100
200
150
250
300
-40 10-15 35 60 85
TURN-ON/TURN-OFF TIME
vs. TEMPERATURE
MAX4580 TOC09
TEMPERATURE (°C)
tON, tOFF (ns)
tON
tOFF
VCOM = +10V
RL = 100Ω
CL = 35pF
V+ = +15V
V- = -15V
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
_______________________________________________________________________________________ 7
80
120
200
160
240
280
10 1211 13 14 15 16 17 18 19 20
TURN-ON/TURN-OFF TIME
vs. SUPPLY VOLTAGE
MAX4580 TOC10
V+, V- (V)
tON, tOFF (ns)
VCOM = +10V
RL = 100Ω
CL = 35pF
tON
tOFF
V+ = +15V
V- = -15V
Typical Operating Characteristics (continued)
(Circuit of Figure 1, TA= +25°C, unless otherwise noted.)
TURN-ON/TURN-OFF TIME vs. VCOM
MAX4580 TOC11
VCOM (V)
tON, tOFF (ns)
86420-2-4-6-8
120
140
160
180
200
220
100
-10 10
V+ = +15V
V- = -15V
RL = 100Ω
CL = 35pF
tOFF
tON
Pin Description
NAME FUNCTION
MAX4580
12 VLLogic Supply Input
16, 9 NC1, NC2 Analog Switch Normally Closed Terminals
–NO1 Analog Switch Normally Open Terminal
–NC1 Analog Switch Normally Closed Terminal
–NO1, NO2 Analog Switch Normally Open Terminals
MAX4590
12
–
–
–
16, 9
MAX4600
PIN
12
–
16
9
–
IN1, IN2 Logic-Control Digital Inputs
1, 3, 6, 8,
10, 15 N.C. No connection. Not internally connected. Connect to GND or low-
impedance point to improve on/off-isolation.
1, 3, 6, 8,
10, 15
1, 3, 6, 8,
10, 15
2, 7 2, 7 2, 7
5GND Ground5 5
4V- Negative Analog Supply Voltage Input. Connect to GND for single-
supply operation.
4 4
14, 11 COM1, COM2 Analog Switch Common Terminals14, 11 14, 11
13 V+ Positive Analog Supply Input13 13
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
8 _______________________________________________________________________________________
___________Applications Information
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maxi-
mum ratings, because stresses beyond the listed rat-
ings can cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by the
logic inputs, NO, or COM. If power-supply sequencing
is not possible, add two small signal diodes (D1, D2) in
series with supply pins for overvoltage protection
(Figure 1). Adding diodes reduces the analog signal
range to one diode drop below V+ and one diode drop
above V-, but does not affect the devices’ low switch
resistance and low leakage characteristics. Device
operation is unchanged, and the difference between V+
and V- should not exceed 44V. These protection diodes
are not recommended when using a single supply.
COM_
V-
V+
NO_
* INTERNAL PROTECTION DIODES
D2
D1
-15V
+15V
MAX4580
MAX4590
MAX4600
*
*
*
*
tr < 20ns
tf < 20ns
50%
0
LOGIC
INPUT
V-
-15V
RL
100Ω
NO_
OR NC_
GND
CL INCLUDES FIXTURE AND STRAY CAPACITANCE.
SWITCH
INPUT
IN_
+3V
tOFF
0
COM_
SWITCH
OUTPUT
0.9V00.9V0
tON
VO
SWITCH
OUTPUT
LOGIC
INPUT
LOGIC INPUT WAVEFORMS INVERTED FOR SWITCHES
THAT HAVE THE OPPOSITE LOGIC SENSE.
VLV+
CL
35pF
+5V +15V
VO
VCOM_
0
REPEAT TEST FOR EACH SWITCH. FOR LOAD
CONDITIONS, SEE Electrical Characteristics.
MAX4580
MAX4590
MAX4600
VO = VCOM ( )
RL + RON
RL
Figure 1. Overvoltage Protection Using External Blocking
Diodes
Figure 2. Switching-Time Test Circuit
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
_______________________________________________________________________________________ 9
VGEN
GND
NC_ OR
NO_
CL
VO
-15V
V-
V+
VO
VIN OFF ON OFF
∆VO
Q = (∆VO)(CL)
COM_
+5V
VIN DEPENDS ON SWITCH CONFIGURATION;
INPUT POLARITY DETERMINED BY SENSE OF SWITCH.
OFF ON OFF
VIN
VIN = +3V
+15V
RGEN
IN
VL
MAX4580
MAX4590
MAX4600
Figure 3. Charge-Injection Test Circuit
IN_
0 OR
2.4V
SIGNAL
GENERATOR 0dBm
+15V
C
VL
ANALYZER NC_ OR NO_
RL
GND
COM_
C
-15V
V-
+5V
V+
MAX4580
MAX4590
MAX4600
Figure 4. Off-Isolation Test Circuit
SIGNAL
GENERATOR 0dBm
+15V
C
ANALYZER N02
RL
GND
COM1
C
V-
-15V
0 OR 2.4V
IN1
N01 50Ω
VL
COM2
+5V
IN2
0 OR
2.4V
NC
V+
MAX4580
MAX4590
MAX4600
Figure 5. Crosstalk Test Circuit
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
10 ______________________________________________________________________________________
Ordering Information (continued) ___________________Chip Information
TRANSISTOR COUNT: 100
CAPACITANCE
METER
NC_ OR NO_
COM_
GND C
V-
-15V
IN_ 0 or
2.4V
C+15V
VL
+5V
f = 1MHz
V+
MAX4580
MAX4590
MAX4600
Figure 6. Switch Off-Capacitance Test Circuit
CAPACITANCE
METER
NC_ OR NO_
COM_
GND C
V-
-15V
IN_ 0 or
2.4V
C+15V
VL
+5V
f = 1MHz
V+
MAX4580
MAX4590
MAX4600
Figure 7. Switch On-Capacitance Test Circuit
PART
MAX4590CAE
MAX4590CWE
MAX4590CPE 0°C to +70°C
0°C to +70°C
0°C to +70°C
TEMP RANGE PIN-PACKAGE
16 SSOP
16 Wide SO
16 Plastic DIP
MAX4590EAE -40°C to +85°C 16 SSOP
MAX4590EWE -40°C to +85°C 16 Wide SO
MAX4590EPE -40°C to +85°C 16 Plastic DIP
MAX4600CAE 0°C to +70°C 16 SSOP
MAX4600CWE 0°C to +70°C 16 Wide SO
MAX4600CPE 0°C to +70°C 16 Plastic DIP
MAX4600EAE -40°C to +85°C 16 SSOP
MAX4600EWE -40°C to +85°C 16 Wide SO
MAX4600EPE -40°C to +85°C 16 Plastic DIP
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
______________________________________________________________________________________ 11
SSOP.EPS
PACKAGE OUTLINE, SSOP, 5.3 MM
1
1
21-0056 C
REV.DOCUMENT CONTROL NO.APPROVAL
PROPRIETARY INFORMATION
TITLE:
NOTES:
1. D&E DO NOT INCLUDE MOLD FLASH.
2. MOLD FLASH OR PROTRUSIONS NOT TO EXCEED .15 MM (.006").
3. CONTROLLING DIMENSION: MILLIMETERS.
4. MEETS JEDEC MO150.
5. LEADS TO BE COPLANAR WITHIN 0.10 MM.
7.90
H
L
0∞
0.301
0.025
8∞
0.311
0.037
0∞
7.65
0.63
8∞
0.95
MAX
5.38
MILLIMETERS
B
C
D
E
e
A1
DIM
A
SEE VARIATIONS
0.0256 BSC
0.010
0.004
0.205
0.002
0.015
0.008
0.212
0.008
INCHES
MIN MAX
0.078
0.65 BSC
0.25
0.09
5.20
0.05
0.38
0.20
0.21
MIN
1.73 1.99
MILLIMETERS
6.07
6.07
10.07
8.07
7.07
INCHES
D
D
D
D
D
0.239
0.239
0.397
0.317
0.278
MIN
0.249
0.249
0.407
0.328
0.289
MAX MIN
6.33
6.33
10.33
8.33
7.33
14L
16L
28L
24L
20L
MAX N
A
D
eA1 L
C
HE
N
12
B
0.068
Package Information
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
MAX4580/MAX4590/MAX4600
1.25Ω, Dual SPST,
CMOS Analog Switches
SOICW.EPS
PACKAGE OUTLINE, .300" SOIC
1
1
21-0042 B
REV.DOCUMENT CONTROL NO.APPROVAL
PROPRIETARY INFORMATION
TITLE:
TOP VIEW
FRONT VIEW
MAX
0.012
0.104
0.019
0.299
0.013
INCHES
0.291
0.009
E
C
DIM
0.014
0.004
B
A1
MIN
0.093A
0.23
7.40 7.60
0.32
MILLIMETERS
0.10
0.35
2.35
MIN
0.49
0.30
MAX
2.65
0.050
0.016L0.40 1.27
0.5120.496D
D
MINDIM
D
INCHES
MAX
12.60 13.00
MILLIMETERS
MIN MAX
20 AC
0.447 0.463 AB11.7511.35 18
0.398 0.413 AA10.5010.10 16
N MS013
SIDE VIEW
H 0.4190.394 10.00 10.65
e 0.050 1.27
D 0.6140.598 15.20 2415.60 AD
D 0.7130.697 17.70 2818.10 AE
H
E
N
D
A1
B
e
A
0∞-8∞
C
L
1
VARIATIONS:
Package Information (continued)
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information
go to www.maxim-ic.com/packages.)
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
12 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
© 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products.
