30-01/G4C-ARTB - Everlight International Corp.

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

3mm Advanced Super Flux LEDs

30-01/G4C-ARTB

Benefits

. High Flux Output.

. Low Profile.

. Low Thermal Resistance.

. Low Power Consumption.

.The product itself will remain within RoHS compliant version.

. ESD-withstand voltage: up to 4KV.

Descriptions

This revolutionary package design allows the light designer to reduce the number of LEDs required and

provide a more uniform and unique illuminated appearance than with other LED solutions. This is possible

through the efficient optical package design and high-current capabilities.

The low profile package can be easily coupled with reflectors or lenses to efficiently distribute light and

provide the desired light appearance.

Applications

. Automotive Exterior Lighting

. Electronic Signs and Signals

. Channel Letter

. Special Lighting application

Device Selection Guide Chip

PART NO. Material Emitted Color Lens Color

30-01/G4C-ARTB InGaN Brilliant Green Water Clear

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

Package Dimensions

Notes: 1.All dimensions are in millimeters

2.An epoxy meniscus may extend about 1.5mm(0.059") down the leads

3.Tolerances unless dimensions ±0.25mm

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Units

Continuous Forward Current IF30 mA

Peak Forward Current(Duty 1/10 @ 1KHZ) IFP 100 mA

Operating Temperature Topr -40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +100 ℃

Soldering Temperature(T=5 sec) Tsol 260 ℃

Power Dissipation Pd120 mW

Zener Reverse Current Iz 100 mA

Electrostatic Discharge ESD 4K V

LED Junction Temperature Tj125 ℃

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

Electro-Optical Characteristics (Ta=25℃)

Parameter Symbol Min. Typ. Max. Condition Unit

Total Flux Φv4500 5800 9000 IF=30mA mlm

Viewing Angle 2θ1/2 ---- 80 ---- IF=30mA deg

Peak Wavelength λp---- 536 ---- IF=30mA Nm

Dominant Wavelength λd520 525 532 IF=30mA Nm

Spectrum Radiation

Bandwidth △λ ---- 36 ---- IF=30mA nm

Forward Voltage VF3.0 3.5 4.0 IF=30mA V

Zener Reverse Voltage Vz 5.2 ---- ---- Iz=5mA V

Reverse Current IR---- ---- 10 VR=5V uA

Rank

30-01/G4C-ARTB (1) (2) (3)

(1) VF(V) (2) λd(3)Φv(mlm)

Bin. Min. Max. Bin. Min. Max. Bin. Min. Max.

1 3.00 3.20 3 520 524 R 4500 5650

2 3.20 3.40 4524 528 S 5650 7150

3 3.40 3.60 5528 532 T 7150 9000

4 3.60 3.80

5 3.80 4.00

*Measurement Uncertainty of Forward Voltage：±0.1V

*Measurement Uncertainty of Luminous Intensity: ±15%

*Measurement Uncertainty of Dominant Wavelength ±1.0nm

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

Typical Electro-Optical Characteristics Curves

Relative Intensity vs. Wavelength Forward Current vs. Forward Voltage

Relative Intensity vs. Forward Current Forward Current vs. Ambient Temp.

Relative Intensity vs. Angle Displacement

450 475 500 525 550 575 600 625 650

WAVELENGTH (nm)

0.00

0.50

1.00

RELATIVE INTENSITY

3.00 3.40 3.802.80 3.20 3.60 4.00

FORWARD VOLTAGE (V)

FORWARD CURRENT (mA)

0 20 40 60 80 100

AMBIENT TEMPERATURE (C)

FORWARD CURRENT (mA)

0 5 10 15 20 25 30

FORWARD CURRENT (mA)

0.00

0.20

0.40

0.60

0.80

1.00

RELATIVE INTENSITY

6 0

9 0

-8 0 -4 0 0

0 .0

0 .2

0 .4

0 .6

0 .8

1 .0

Relative Intensity (a.u.)

V ie w in g A n g le (de gree)

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

Packing Quantity Specification

(1) 60 pcs/1 tube, 30 tubes/1 small inside box, 12 small inside boxes/1 outside box

(2) 60 pcs/1 tube, 105 tubes/1 big inside box, 4 big inside boxes/1 outside box

Label Form Specification

(1)Tube Label Form

(2)Box Label Form

QTY: Packing Quantity

LOT NO: Lot Number

CAT: Ranks of Forward Voltage, Dominant Wavelength and Total Flux

CPN: Customer’s Production Number

P/N : Production Number

HUE: Reference

REF: Reference

CPN:

P/N:

EVERLIGHT

30-01/G4C-ARTB

QTY：CAT:

HUE:

REF:

LOT NO：

RoHS

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

Notes

1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material

change for above specification.

2. When using this product, please observe the absolute maximum ratings and the instructions for using

outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting

from use of the product which does not comply with the absolute maximum ratings and the instructions

included in these specification sheets.

3. These specification sheets include materials protected under copyright of EVERLIGHT corporation.

Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent.

4. Below the zener reference voltage Vz, all the current flows through LED and as the voltage rises to Vz,

the zener diode “breakdown." If the voltage tries to rise above Vz current flows through the zener branch

to keep the voltage at exactly Vz.

5. When the LED is connected using serial circuit, if either piece of LED is no light up but current can’t

flow through causing others to light down. In new design, the LED is parallel with zener diode. if either

piece of LED is no light up but current can flow through causing others to light.

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

6. Soldering Condition

Careful attention should be paid during soldering. When soldering, leave more then 3mm from

solder joint to case, and soldering beyond the base of the tie bar is recommended.

Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly

when soldering.

Recommended soldering conditions:

Hand Soldering DIP Soldering

Temp. at tip of iron 300 Max.℃(30W Max.) Preheat temp. 100 Max.℃(60 sec Max.)

Soldering time 3 sec Max. Bath temp. 260 Max.

Distance 3mm Min.(From solder joint

to case)

Bath time. 5 sec Max.

Distance 3mm Min.

LifecyclePhase:

Revision : 2

Expired Period: Forever

Release Date:2013-05-06 14:05:17.0

DATASHEET

P-LED

30-01-G4C-ARTB

Revision History

Rev. Modified date File modified contents

2 2013/5/2 Change the form of data