8 7 6 i, 3 DRW NO. SH REV v C -1.67-5110-500 1] ZONE REV SCR NO. DESCRIPTION BY DATE APPROVED BACKPLANE GUIDANCE/POLARIZING MODULE - - 29475 NEW RELEASE JV 11/29/99 | D.Provencher ASSEMBLY PART NUMBER ASSIGNMENT - A 32560 ADDED ADVANCE MATE SHIELD JSG 5/9/01 LEBLANC B 39370 ADDED VHDM TO TITLE SG 8/01/02 YEH 467 -X1XX- XX X C 40819 MODIFIED TABLE III SG 1/7/03 WLI 2 = CUSTOM LOAD.LEAD FREE L____ siGnat CONTACT LOAD (SEE TABLE 2) D 41020 ADDED TABLE V AND NOTE 9 SG V27703 W LI 3 = L-SERIES (PIN LENGTH) E WLII-SV6MMW .VERO1 ADDED TABLE VI AND REVISED DATUMS SG 1730/04 W.Ll 2 = UNIFORM LOAD, 702x 1 = 4.75 _ K X 12.00 | = (L) p>B | F KLEC-63ANLR.VERO ADDED 467-X105-XXX PART OPTION JSG 1/29/04 LEBLANC = tuSrae OLD TEARED. - -22 SFE TABLE 8 G | _KLEC-66RSES.VEROT ADDED NOTES 17 & 18 SG | 9720/04 | LEBLANC 8 = ADVANCE MATE,UNIFORM LOAD 702X 4 = 5.15 G3 00 ~_ H DMAG-6BSMYQ.VERO1 ADDED LEAD FREE PLATING OPTION GKR 05/03/05 S.BAIR ; : nero LOAD. VEADED. AOVANCED PLATING PLATING CODE @ B0.200 1O . 700 J MLEE-6KGMFU.VERXX ss a ~ ne M.LEE 12/27/05 C.SAMMIS D N = CUSTOM LOAD, LEAD FREE, ADVANCED PLATING DE dap ROR K SBAR-6NHL4J.VERO1 AND TABLE 6 HCL | 04/11/06 | K.LEBLANC NO. OF POSN 2 = 169 6=806 5.16 i () 55 ADDED NEW PART NUMBERS FOR NEW PLATING CODES . 3 = 768 7=805 IN ASSEMBLY PART NUMBER ASSIGNMENT TREE 5 - 5 POSN Lng AP IZING L CSAS-82ZPTE.VERO1 REMOVED TABLE 6 AND NOTE 16. HCL-MH |03/01/2010 C.SAMMIS 10 = 10 POSN PIN LOCATION MODIFIED NOTE 6 AND 7. 25 = 25 POSN 42.25 CODE (SEE TABLE 4) TABLE 3 0.15 TABLE 1 ASSEMBLY SHIELD CONTACTS ASSEMBLY BACKPLANE GUIDANCE] y | 4 > | TOTAL NUMBER OF | TOTAL NUMBER OF PART NUMBER |SEE DETAIL W SH 2 | ONIELD LENGTH | Pe PART NUMBER | POLARIZING MODULE (0 SIGNAL CONTACTS | GROUND SHIELD 4.67-34XX-XXX N/A N/A = ROW A 467-X110-XXX 467-010-070 9 | (18.00) | 27.0 40 10 LOT SINK XXX 272-002 53 5 85 467-X125-XXX 467-0125-070 24 | (48.00) | 57.0 100 25 167-6 1KX XXX 772-0001 a 53 xX . X 14.. (8.00) 467-X105-XXX 467-0105-070 4 | (8.00) | 17.0 20 5 _ ! 467-81XX-XXX 272-0024-@ 5.5 f i | TABLE 2 467-91XX-XXX | 272-0004-@) 5.5 | , 7 -91XX- -0004- , Yt eo ASSEMBLY SIGNAL CONTACTS CONTACT LENGTH MU CLOME LT Te Le Le TD TO LO Ln 1 PART NUMBER a 467-(3,5,8)1XX-XX1 260-0022-@ 4.75 2.25 467-(3,5,8)1XX-XX2 260-0021- @ 6.25 TABLE 5 OW | ; L414 075 467-(3,5,8)1XX-XX3 260-0023- 1.25 GUIDE AND POL PIN PART NUMBER N K X |2.00] = (L) F 4.67-(3,5,B)1IXX-XX4 260-0024-@ 5.15 STANDARD GUIDE PIN | 564-0385-553 19.3 SEE TABLE 1 | 7s 467-(6 ,9)1XX-XX1 260-0002- @ 4.75 CUSTOM GUIDE PIN 564-0420-553 17.3 467-(6,9)1XX-XX2Z 260-0001- D 6.25 CUSTOM GUIDE PIN 564-0487-553 13.4 P 4OT-(6 DIXX-XX3 260-0003-@ 4.25 STANDARD POL PIN 564-0440-553 - 10.4 467-(6,9)1XX-XX4 260-0004-@ 5.15 TABLE 4 w PART NUMBER POLARIZING PIN | 0.25 3 < 1.1 ORIENTATION 3.65 =| A DO.30M) JAC IB > Lo a INSULATOR & [0.40 [A [C OLARIZING PIN (1) 4 7~ SEE TABLE 1 | | nN GUIDE PIN A || 0.40 4.750.410 5.15:0.10 |} Of: [0.35 [A |B \ 4 .25+0.10 Uf s @ | A ON SHIELD CONTACT N +5 -- - 5 MATING SURFACE a SEE TABLE 9 | a = sos oun , 2 MATING SURFACE P | ( | 1) | SEE TABLE 5 ! | a CONTACT LENGTH LY d | SEE TABLE 2 & 12.3 iy B DETAIL K SHIELD HEIGHT meta U 6.50 DETAIL U SCALE 12/1/1 SEE TABLE 3 SCALE 6/1 TENOR OR) ! 1 4 SEE TABLE 3 1 i NOTES: G) POLARIZING PIN MUST ALIGN AS INDICATED BY PART NUMBER CODE (SEE TABLE IV). ~ TO INSURE PROPER ALIGNMENT, THE OCTAGONAL BASE PORTION OF THE PIN MUST BEPOSITIONED INTO THE CORRESPONDING MOLDED CAVITY. } 042 SO _ 2.5 WHEN ASSEMBLED TO BACKPLANE INSULATOR, CONTACTS MUST SEAT FLUSH WITH INSULATOR'STOP SURFACE TO A MAXIMUM ALLOWABLE GAP OF 0.25. 7 . |G L 0.55 : (TAIL LENGTH) SHIELD SHALL BE STRAGHT WITH MAXIMUM ALLOWABLE BOW OF 0.15 MILLIMETERS ON EITHERSIDE OF SHIELD. SEE DETAIL X. SEE SHEET 2. . SECTION X- <> |D0.25 |F IE |G OPEN, NOTCH END DESIGNATES COLUMN 1. oe ATA 8.00 PART MARKING AS FOLLOWS: SFE DETAIL K LINE 1; ATCSYYWWDHH (LOGO, YEAR, WEEK, DAY, HOUR) SFE DETAIL L LINE 2: MODULE PART NUMBER (467 ###4HH#). = LINE 3: WORK ORDER NUMBER (VHa######) WHERE * DENOTES MANUFACTURING LOCATION. Q z= |F MODULE PART NUMBER |S 467-7XXX-XXX OR 467-2XXX-XXX OR 460-LXXX-XXX OR 460-NXXX-XXX, PART REVISION, MODULE ORIENTATION, I SECTION Z-Z z NUMBER OF COLUMNS, PLATING CODE, AND SIGNAL CONTACT LOAD ARE NOT APPLICABLE. yt 0.25 MAX ou @ LAST 3 DIGITS OF THE SIGNAL CONTACT AND SHIELD CONTACT PART NUMBERS ARE DETERMINED BY PLATING CODE.MATCHED PLATING DEFINED BY THE 9th DIGIT OF ASSEMBLY PART NUMBER. o> 735 - Ni SULFAMATE, STANDARD GOLD, LEADED i 732 - Ni SULFAMATE, HIGH GOLD, LEADED N I 769 - Ni SULFAMATE, STANDARD GOLD, LEAD-FREE 3S 768 - Ni SULFAMATE, HIGH GOLD, LEAD-FREE dy 804 - NANO Ni, STANDARD GOLD, LEADED \ NS 2.64 Oo 803 - NANO Ni, HIGH GOLD, LEADED oO 806 - NANO Ni, STANDARD GOLD, LEAD-FREE | A _ i _ TOLERANCES FOR HASL ONLY, PTH T0 BE 0.610 ~ 0.495 MILLIMETERS. WSUTATORN so nos D -Provencher Amphenol TCS : . ROUTE DIFFERENTIAL PAIRS THROUGH A-B AND D-E DRAWN A Division of Amphenol Corporation 2 10. DATUM -A- IS DEFINED AS THE WAFER MATING SURFACE OT THE PLASTIC INSULATOR. 0.00. 140.133 200 Innovative Way, Nashua, NH 03062 603.679.2000 11. DATUM -B- IS DEFINED AS THE CENTERLINE OF THE TOP OF THE OUTERMOST WAFER SLOTS IN THE INSULATOR WALLS. CHK 11/23/99 TITLE = 12. DATUM -C- IS DEFINED AS THE CENTERLINE OF THE CONNECTOR MEASURED FROM THE TWO QUTERMOST ROWS OF SIGNAL CONTACT HOLES. 0.000 |+ - D .Provencher BACKPLANE POLARIZING/GUIDANCE M = 13. DATUM -E- |S DEFINED AS THE CENTERLINE OF THE CONNECTOR MEASURED FROM THE TWO OUTERMOST COLUMNS OF SIGNAL CONTACTS TAIL SIDE. APVD 4/27/00 ASSEMBLY, LEFT. 5 ROW VHDM-HSD 14. DATUM -F- IS DEFINED AS THE BOTTOM SURFACE OT THE PLASTIC INSULATOR. ANGLES |+ - PART NO. xy 5. DATUM ~G- IS DEFINED AS THE CENTERLINE OF THE CONNECTOR MEASURED FROM THE TWO OUTERMOST ROWS OF SIGNAL CONTACTS TAIL SIDE. 0.20 $a LL UNLESS OTHERWISE SPECIFIED DENSON SEF PART NUMBER TREE NA : : A IN MM, IMAL MARK IS A | @D. USING GUIDE PINS THAT ARE SHORTER THAN THE STANDARD HEIGHT OF 19.3mm AND POLARIZING PINS THAT ARE SHORTER THAN THE STANDARD |D0.25 |F IE |G {} DRAWING NO. 67-5110-500 f HEIGHT OF 12.6mm MAY NOT PROVIDE THE SUFFICIENT X AND Y AXIS ALIGNMENT AND POLARIZING PROTECTION PRIOR TO COMMENCEMENT OF ALL DETAIL L ori COMPONENT MATING SEQUENCES. CONSULT TERADYNE APPLICATIONS ENGINEERING PRIOR TO SYSTEMS DESIGN AND COMPONENT SELECTION. SCALE 12/1 CUSTOMER USE Pro/E type: P1018-ASSY-BP-10-LEFTGUIDE-BRD | 1.11 G8. STANDARD GUIDE PIN (564-0385-553) AND STANDARD POLARIZING PIN (564-0387-540) ARE IN STANDARD 5000 SERIES MODEL ASSEMBLIES. ANY GUIDE INTERPRET PER ASME Y14.5M DRAW ING Pro/E DRAWING: C-467-5110-500 | 1.0 PIN OR POLARIZING PIN OTHER THAN THESE STANDARD NUMBERS WILL RESULT IN CUSTOM 7XXX OR 2XXX OR LXXX OR NXXX SERIES MODULE ASSEMBLIES BEING ASSIGNED. CODE IDENT 3473 size a IScAE a1 SHEET 1 OF 2 8 7 6 5 A 4 3 2 '8 7 6 i, 3 DRW NO. SH REV v C -467-5110-500 2 | 1 ZONE [REV SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 a OO SIGNAL CONTACT {| \ D POSITION 1 . Ty moe. a OF SHIELD spe LVZLIA \ Jeu \ - SIGNAL PTH NL oe SEE DETAIL DETAIL X SHIELD PTH NJ | 6 x NO SCALE D AUGHTERC ARD 7 | NIK CONNECTOR SIDE c mM LH ~~ SIGNAL CONTACT Ih POSITION 1 ROW A s [40.00] be N __ IIL + kK X |2.00| = (L) NUN d , 5h SEE TABLE 1 SHEET 1 NI N } P 2 25 | = (2.00) n) \ d r q > SIGNAL ROW y ROW A 14.36 4 P ROW A 45 o- | APE --.---0 rH | <q -- --- GROUND ROW \ ___ _ ROW C NI _ DAUGHTERC ARD q x SIGNAL CONTACT 2.25 \ 0 a3 2 ADJACENT SIGNAL 10.10 |x y \ . COLUMN FOR 0.660[0.026] DRILL (0.41) CONTINUOUS GRID 31.00 PAD 0.75 SEE DETAIL V 0.410 4 = \ es BACKPLANE HOLE PATTERN : is B SIGNAL WITH GUIDANCE \ e CONNECTOR SIDE od] aw SIGNAL CONTACT : ROW A Le ee | | Tet TE Te Oe UY C VP uv V7 7 7 7 77 7] - LN ALIN we oF Fe ww 4 7 aianaia ACKPLANE * OF BACKPLANE SIGNAL PIN 1.8 MIN [a _ SHIELD BOARD Oy , " 7 <_____ SECTION Z-Z | \ / \ / Hi by : ! HHT Dp SECTION X-X 3 EHS SF | = : S . 2.69 3 bh 5.5 = = og DESIGN 7/7/99 t L {hh rT | 7 TOLERANCES D .Provencher Amphenol TCS \ Ln \ 0.0 +0.25 | prawn A Division of Amphenol Corporation 2 ew Fee iF oS. UW i 0.00 40.13 200 Innovative Way, Nashua, NH 08062 603.879.3000 Nm | | CHK 11/23/99 TITLE co DETAIL W DETAIL W VY) VV, Vy 0.000 |+ - D.Provencher | BACKPLANE POLARIZING/GUIDANCE M |-& STANDARD MATE SHIELD ADVANCE MATE SHIELD APD 4/27/00 ASSEMBLY, LEFT, 5 ROW VHOM-HSD 272-0001-XXX 279-0004 -XXX VV ANGLES | - ART NO. ev UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE PART NUMBER TREE N/A ARE IN MM, DECIMAL MARKER IS A PERIOD DRAW ING NO. REV ACKPLANE {} ( -467-5 110-500 [ DETAIL V CUSTOMER USE Pro/E type: P1018-ASSY-BP-10-LEFTGUIDE-BRD | 1.11 SCALE 6/1 INTERPRET PER ASME Y14.5M DRAW ING Pro/E DRAWING: C-467-5110-500 | L.O CODE IDENT 31413 SIZE D SCALE 3/1 SHEET 2 OF 2 8 7 6 5 A 4 3 2 '