Soft Shell Pin and Socket Connectors AMP Commercial MATE-N-LOK Connectors (Continued) Motor Mount, Positive Lock 6, 8, 10, 12 and 16 Circuit, Dual Row .785 [19.94] .725 [18.41] .850 [21.59] .930 [23.62] F E .195 [4.95] .360 [9.14] Pin Housing (Cap) 8 Standard Density 10 12 16 Part Numbers Pin Housing (Cap) Socket Housing (Plug) UL94V-2 Nylon, Natural Color Dimensions E F Number of Circuits 6 Socket Housing (Plug) .705 17.90 .900 22.86 1.095 27.81 1.290 32.77 1.680 42.67 .610 15.49 .805 20.45 1.000 25.4 1.195 30.35 1.585 40.26 1-480271-0 1-480270-01 1-480284-0 1-480283-01 1-480286-0 1-480285-01 1-480288-0 1-480287-0 1-480439-0 1-480438-0 1Housing accepts double wire applications where individual insulation diameters do not exceed .115 [2.92]. Commercial MATE-N-LOK Connectors .200 [5.08] Centerline Note: All part numbers are RoHS Compliant. Recommended Panel Cutout for Motor Mount Pin Housing .015 R Max. [.381] All Corners 6 A E A View is from pin housing entry side. Number of Circuits 8 R 10 12 A .585 [14.86] T 16 Section A-A A Dim. .715 18.16 .910 23.11 1.105 28.07 1.300 33.02 1.690 42.93 Mounting Information Note: Motor mount housings may be used in flat panels 1. Recommended panel thickness "E" is .040-.100 [1.02-2.54] and is dependent on "T" and "R". 2. The pin housing must be inserted in a rocking manner. 3. The panel must be punched so that the housing enters the panel in the same direction as the punch. 160 Catalog 82181 Revised 4-08 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080-208