SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N: Description : Product : Multi-layer Ceramic Capacitor CL32B106KBJNNNE CAP, 10, 50V, 10%, X7R, 1210 A. Samsung Part Number 32 CL Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness B 106 K B J N N Samsung Multi-layer Ceramic Capacitor 1210 (inch code) L: 3.20 0.30mm X7R 10 10 % 50 V 2.50 0.20mm N E W: 2.50 0.20mm Inner electrode Termination Plating Ni Product Special Normal Reserved for future use Packaging Embossed Type, 7" reel Cu Sn 100% (Pb Free) B. Samsung Reliablility Test and Judgement condition Judgement Capacitance Tan (DF) Insulation Test condition Within specified tolerance 0.1 max. 110% 1.00.2Vrms More than 100Mohm Rated Voltage 60~120 sec. Resistance Appearance Withstanding Voltage Temperature Characteristics No abnormal exterior appearance Microscope (x10) 250% of the rated voltage No dielectric breakdown or mechanical breakdown X7R (From -55 to 125, Capacitance change should be within 15%) Adhesive Strength of Termination Bending Strength No peeling shall be occur on the terminal electrode Capacitance change : within 12.5% Solderability More than 75% of terminal surface Resistance to Soldering heat 500g*F, for 101 sec. Bending to the limit (1mm) with 1.0mm/sec. SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Capacitance change : within 7.5% Tan , IR : initial spec. Solder pot : 2705, 101sec. Vibration Test Judgement Capacitance change : within 5% Tan , IR : initial spec. Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) With rated voltage 402, 90~95%RH, 500+12/-0hrs Moisture Resistance Capacitance change : within 12.5% Tan 0.125 max IR : More than 12.5* High Temperature Resistance Capacitance change : within 12.5% Tan 0.125 max IR : More than 25* With 150% of the rated voltage Max. operating temperature 1000+48/-0hrs Temperature Cycling Capacitance change : within 7.5% Tan , IR : initial spec. 1 cycle condition Min. operating temperature Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue. 25 25