RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN 10/100 Base-T Ethernet Application Meets IEEE 802.3 & ANSI X 3.263 standards Impedance: 100OHMS Transmit open circuit inductance (OCL): 350uH (MIN) @100KHz,0.1VRMS with 8mA DC Bias Always EU RoHS/ELV Compliant, wave solder capable to 265C RJ45 jack cavity conforms to FCC rules and regulations Part 68, SUB Part F Standard operating temp: 0C to +70C (see footnote) Industrial operating temp: -40C to +85C (see footnote) Electrical Specifications @ 25C Part Number AR1013-1338_ OCL(uH Min) @ 100kHz, 0.1V With 8mA DC Bias 350 Insertion Loss (dB Max) 0.5-100MHz 1.1 Turns Ratio chip: cable (3%) 1CT:1CT Return Loss (dB Min) 30.1-60MHz 18-20*log(f/30) 0.5-30MHz 18 60.1-80MHz 12 Electrical Specifications @ 25C Part Number EMI Fingers LED (L/R) AR1013-1338_ YES G/Y Cross Talk (dB Min) 0.5-40MHz 40.1-100MHz 35 33-20*log(f/50) *Complete part number by inserting "S" for Standard Temp. or "I" for Industrial Temp. CMRR (dB Min) 0.5-100MHz HI-POT (VDC) 30 2250 All specifications subject to change without notice. MECHANICAL Unless otherwise specified all tolerances are: 0.25 in mm AR1013-1338_ 21.60 Max 13.50 3.6 0.30 15.90 LED-L GREEN LED-R YELLOW 2.54 3.38 3.05 8.89 5.08 P9 P10 P11 ALLIED P12 AR1013-1338_ YYWW P1 P8 Back View 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 1501/06/11 www.alliedcomponents.com RoHS Single Port RJ45 CONNECTOR WITH INTEGRATED MAGNETICS,TAB DOWN SCHEMATICS AR1013-1338_ GREEN P9 P11 YELLOW Notes: P10 P12 1. R1-R4=75OHMS,1/16W,5%Resistors. 2. C1=1000pF,2KV Decouping Capacitor. 3. LED Compliant With IEC60825-1 Saftety of Laser Products When operated Up to 20mA. 4. LED Forward Voltage: 2.1V(TYP), LED Power Dissipation: 105mW, LED Peak Wavelength: Green=565nm, Yellow=5 PCB LAYOUT Unless otherwise specified all tolerances are: 0.05 in mm AR1013-1338_ 15.49 11.43 2 3.38 7 12 10 9 5.08 1 8.89 8 3.05 2.54 7*1.27=8.89 11 7.57 2.54 MATERIALS AR1013-1338_ Housing: PBT, Flammability Rating 94V-O. Shell: C2680 Brass, 0.20mm thick, 50u" Min nickel plating. Mod Jack Contacts: Phosphor Bronze, 0.35mm thick, 6u" Gold plated. LED: Diffused Epoxy Lens, 0.5x0.5mm Carbon Steel wireframe leads. 714-665-1140 ALLIED COMPONENTS INTERNATIONAL REVISED 01/06/11 15 www.alliedcomponents.com