Cylindrical Proximity Sensor E2E/E2E2 A New Series of Easy-to-use and Tough E2E/E2E2 Models Long-size E2E2 Proximity Sensor Conforms to CENELEC * Ideal for a variety of applications. * With a metal connector that can be tightened securely and a cable protector. * With an easy-to-see indicator, deeper mounting holes, and tightening flats for wrenches. * New 3-dia. size (sensing distance: 0.6 mm) added to the lineup. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Ordering Information E2E DC 2-wire/Pre-wired Models Self-diagnostic output function Yes Size Model NO Shielded Unshielded No Sensing distance Shielded Unshielded M12 3 mm NC E2E-X3D1S (See note 1.) --- M18 7 mm E2E-X7D1S (See note 1.) --- M30 10 mm E2E-X10D1S (See note 1.) --- M12 8 mm E2E-X8MD1S (See note 1.) --- M18 14 mm E2E-X14MD1S (See note 1.) --- M30 20 mm E2E-X20MD1S (See note 1.) --- M8 2 mm E2E-X2D1-N (See notes 2 and 3.) E2E-X2D2-N (See note 3.) M12 3 mm E2E-X3D1-N (See notes 1, 2 and 3.) E2E-X3D2-N (See note 3.) M18 7 mm E2E-X7D1-N (See notes 1, 2 and 3.) E2E-X7D2-N (See note 3.) M30 10 mm E2E-X10D1-N (See notes 1, 2 and 3.) E2E-X10D2-N M8 4 mm E2E-X4MD1 (See notes 2 and 3.) M12 8 mm E2E-X8MD1 (See notes 1, 2 and 3.) E2E-X8MD2 M18 14 mm E2E-X14MD1 (See notes 1, 2 and 3.) E2E-X14MD2 M30 20 mm E2E-X20MD1 (See notes 1, 2 and 3. E2E-X20MD2 E2E-X4MD2 Note 1. In addition to the above models, E2E-X@@15 models (e.g., E2E-X3D15-N), which are different in frequency from the above models, are available. 2. E2E models with a robotics cable are available as well. The model number of a model with a robotics cable has the suffix "-R" (e.g., E2E-X3D1-R). 3. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X3D1-N 5M). E2E/E2E2 Cylindrical Proximity Sensor 1 DC 2-wire/Connector Models Connector Self-diagnostic output function M12 Yes Size Shielded Unshielded No Shielded Unshielded M8 Shielded Sensing distance M12 3 mm M18 M30 Model NO NC E2E-X3D1S-M1 --- 7 mm E2E-X7D1S-M1 --- 10 mm E2E-X10D1S-M1 --- M12 8 mm E2E-X8MD1S-M1 --- M18 14 mm E2E-X14MD1S-M1 --- M30 20 mm E2E-X20MD1S-M1 --- M8 2 mm E2E-X2D1-M1G E2E-X2D2-M1G M12 3 mm E2E-X3D1-M1G (See note.) E2E-X3D2-M1G M18 7 mm E2E-X7D1-M1G (See note.) E2E-X7D2-M1G M30 10 mm E2E-X10D1-M1G (See note.) E2E-X10D2-M1G M8 4 mm E2E-X4MD1-M1G E2E-X4MD2-M1G M12 8 mm E2E-X8MD1-M1G (See note.) E2E-X8MD2-M1G M18 14 mm E2E-X14MD1-M1G (See note.) E2E-X14MD2-M1G M30 20 mm E2E-X20MD1-M1G (See note.) E2E-X20MD2-M1G M8 2 mm E2E-X2D1-M3G E2E-X2D2-M3G 4 mm E2E-X4MD1-M3G E2E-X4MD2-M3G Unshielded Note: In addition to the above models, E2E-X@D15-M1G models (e.g., E2E-X3D15-M1G), which are different in frequency from the above models, are available. DC 2-wire/Pre-wired Connector Models Size Shielded Unshielded Sensing distance M12 3 mm M18 7 mm M30 10 mm Operation mode Polarity NO Yes Model E2E-X3D1-M1GJ No E2E-X3D1-M1J-T Yes E2E-X7D1-M1GJ No E2E-X7D1-M1J-T Yes E2E-X10D1-M1GJ No E2E-X10D1-M1J-T Yes E2E-X8MD1-M1GJ M12 8 mm M18 14 mm E2E-X14MD1-M1GJ M30 20 mm E2E-X20MD1-M1GJ Note 1. A model with no polarity has a residual voltage of 5 V, which must be taken into consideration together with the interface condition (the PLC's ON voltage, for example) when connecting the Proximity Sensor to a load. 2. The standard cable length is 300 mm. Models are also available with 500 mm and 1 m cables. Connector Pin Assignments of DC 2-wire Model The connector pin assignments of each new E2E DC 2-wire conforms to IEC947-5-2 Table III. The following E2E models with conventional connector pin assignments are available as well. Size Shielded Operation mode M8 M12 M18 M30 2 Model NO E2E-X2D1-M1 NC E2E-X2D2-M1 NO E2E-X3D1-M1 NC E2E-X3D2-M1 NO E2E-X7D1-M1 NC E2E-X7D2-M1 NO E2E-X10D1-M1 NC E2E-X10D2-M1 E2E/E2E2 Cylindrical Proximity Sensor Size Unshielded Operation mode M8 M12 M18 M30 Model NO E2E-X4MD1-M1 NC E2E-X4MD2-M1 NO E2E-X8MD1-M1 NC E2E-X8MD2-M1 NO E2E-X14MD1-M1 NC E2E-X14MD2-M1 NO E2E-X20MD1-M1 NC E2E-X20MD2-M1 DC 3-wire/Pre-wired Models Size Sensing Output distance configuration Shielded 3 dia. 0.6 mm 4 dia. 0.8 mm M5 5.4 dia. M8 M12 M18 M30 1 mm 1 mm 1.5 mm 2 mm 5 mm 10 mm Size Model UnM8 shielded Sensing Output distance configuration 2 mm Model NPN NO E2E-X2ME1 (See note 2.) NPN NO E2E-CR6C1 NPN NC E2E-X2ME2 NPN NC E2E-CR6C2 PNP NO E2E-X2MF1 PNP NO E2E-CR6B1 PNP NC E2E-X2MF2 PNP NC E2E-CR6B2 NPN NO NPN NO E2E-CR8C1 (See notes 1 and 2.) E2E-X5ME1 (See notes 1, 2, 3, and 4.) NPN NC NPN NC E2E-CR8C2 E2E-X5ME2 (See notes 3 and 4.) PNP NO E2E-CR8B1 PNP NO E2E-X5MF1 PNP NC E2E-CR8B2 PNP NC E2E-X5MF2 NPN NO E2E-X1C1 (See notes 1 and 2.) NPN NO E2E-X10ME1 (See notes 1, 2, 3, and 4.) NPN NC E2E-X1C2 NPN NC E2E-X10ME2 (See notes 3 and 4.) PNP NO E2E-X1B1 PNP NO E2E-X10MF1 PNP NC E2E-X1B2 PNP NC E2E-X10MF2 NPN NO E2E-C1C1 (See notes 1 and 2.) NPN NO E2E-X18ME1 (See notes 1, 2, 3, and 4.) NPN NC E2E-C1C2 NPN NC PNP NO E2E-C1B1 E2E-X18ME2 (See notes 3 and 4.) M12 M18 M30 5 mm 10 mm 18 mm PNP NC E2E-C1B2 PNP NO E2E-X18MF1 NPN NO E2E-X1R5E1 (See notes 1 and 2.) PNP NC E2E-X18MF2 NPN NC E2E-X1R5E2 PNP NO E2E-X1R5F1 PNP NC E2E-X1R5F2 NPN NO E2E-X2E1 (See notes 1, 2, 3, and 4.) NPN NC E2E-X2E2 (See notes 3 and 4.) PNP NO E2E-X2F1 PNP NC E2E-X2F2 Note 1. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X2E1 5M). 2. Models with a robotics cable are also available. These models are E2E-X@E1-R (e.g., E2E-X5E1-R). 3. Models with a different frequency are also available. These models are E2E-X@E@5 (e.g., E2E-X5E15). 4. These models have e-CON connectors (0.3 m cable length), which is indicated by the suffix "-ECON" (e.g., E2E-X2E1ECON). NPN NO E2E-X5E1 (See notes 1, 2, 3, and 4.) AC 2-wire/Pre-wired Models NPN NC E2E-X5E2 (See notes 3 and 4.) PNP NO E2E-X5F1 PNP NC E2E-X5F2 NPN NO E2E-X10E1 (See notes 1, 2, 3, and 4.) NPN NC E2E-X10E2 (See notes 3 and 4.) PNP NO E2E-X10F1 PNP NC E2E-X10F2 Size Shielded M8 Sensing distance 1.5 mm Operation mode NO Model E2E-X1R5Y1 NC E2E-X1R5Y2 E2E-X2Y1 (See notes 1 and 2.) M12 2 mm NO NC E2E-X2Y2 M18 5 mm NO E2E-X5Y1 (See notes 1 and 2.) NC E2E-X5Y2 M30 10 mm NO E2E-X10Y1 (See notes 1 and 2.) NC E2E-X10Y2 2 mm NO E2E-X2MY1 UnM8 shielded NC E2E-X2MY2 E2E-X5MY1 (See notes 1 and 2.) M12 5 mm NO NC E2E-X5MY2 M18 10 mm NO E2E-X10MY1 (See note 1.) NC E2E-X10MY2 M30 18 mm NO E2E-X18MY1 (See note 1.) NC E2E-X18MY2 Note 1. Models with a different frequency are also available. These models are E2E-X@Y@5 (e.g., E2E-X5Y15). 2. Cables with a length of 5 m are also available. Specify the cable length at the end of the model number (e.g., E2E-X2Y1 5M). E2E/E2E2 Cylindrical Proximity Sensor 3 DC 3-wire/Connector Models Connector M12 Size Sensing Output distance configuration Shielded M8 M12 M18 M30 Unshielded M8 M12 M18 M30 M8-3 pin Shielded M8 Unshielded 4 2 mm 5 mm 10 mm 2 mm 5 mm 10 mm 18 mm Shielded 4 dia. 0.8 mm M5 M8 1.5 mm M8 1 mm 1.5 mm 2 mm AC 2-wire/Connector Models Model NPN NO E2E-X1R5E1-M1 NPN NC E2E-X1R5E2-M1 PNP NO E2E-X1R5F1-M1 PNP NC E2E-X1R5F2-M1 NPN NO E2E-X2E1-M1 NPN NC E2E-X2E2-M1 PNP NO E2E-X2F1-M1 PNP NC E2E-X2F2-M1 NPN NO E2E-X5E1-M1 NPN NC E2E-X5E2-M1 PNP NO E2E-X5F1-M1 PNP NC E2E-X5F2-M1 NPN NO E2E-X10E1-M1 NPN NC E2E-X10E2-M1 PNP NO E2E-X10F1-M1 PNP NC E2E-X10F2-M1 NPN NO E2E-X2ME1-M1 NPN NC E2E-X2ME2-M1 PNP NO E2E-X2MF1-M1 PNP NC E2E-X2MF2-M1 NPN NO E2E-X5ME1-M1 NPN NC E2E-X5ME2-M1 PNP NO E2E-X5MF1-M1 PNP NC E2E-X5MF2-M1 NPN NO E2E-X10ME1-M1 NPN NC E2E-X10ME2-M1 PNP NO E2E-X10MF1-M1 PNP NC E2E-X10MF2-M1 NPN NO E2E-X18ME1-M1 NPN NC E2E-X18ME2-M1 PNP NO E2E-X18MF1-M1 PNP NC E2E-X18MF2-M1 NPN NO E2E-CR8C1-M5 NPN NC E2E-CR8C2-M5 PNP NO E2E-CR8B1-M5 PNP NC E2E-CR8B2-M5 NPN NO E2E-X1C1-M5 NPN NC E2E-X1C2-M5 PNP NO E2E-X1B1-M5 PNP NC E2E-X1B2-M5 NPN NO E2E-X1R5E1-M3 NPN NC E2E-X1R5E2-M3 PNP NO E2E-X1R5F1-M3 PNP NC E2E-X1R5F2-M3 NPN NO E2E-X2ME1-M3 NPN NC E2E-X2ME2-M3 PNP NO E2E-X2MF1-M3 PNP NC E2E-X2MF2-M3 E2E/E2E2 Cylindrical Proximity Sensor Size Shielded M12 Sensing distance 2 mm Operation mode NO Model E2E-X2Y1-M1 NC E2E-X2Y2-M1 E2E-X5Y1-M1 M18 5 mm NO NC E2E-X5Y2-M1 M30 10 mm NO E2E-X10Y1-M1 NC E2E-X10Y2-M1 5 mm NO E2E-X5MY1-M1 NC E2E-X5MY2-M1 M18 10 mm NO E2E-X10MY1-M1 NC E2E-X10MY2-M1 M30 18 mm NO E2E-X18MY1-M1 NC E2E-X18MY2-M1 UnM12 shielded AC/DC 2-wire/Pre-wired Models Size Sensing distance Operation mode NO Model Shielded M12 3 mm M18 7 mm E2E-X7T1 (See note 2.) E2E-X3T1 M30 10 mm E2E-X10T1 Note 1. These models do not conform to CE standards. 2. Cables with a length of 5 m are also available as standard models. Specify the cable length at the end of the model number (e.g., E2E-X7T1 5M). E2E2 DC 2-wire/Pre-wired Models Size Shielded Unshielded Sensing distance Operation mode NO (See note.) Model M12 3 mm E2E2-X3D1 M18 7 mm NC E2E2-X7D2 M30 10 mm NO (See note.) E2E2-X10D1 NC E2E2-X10D2 M12 8 mm NO (See note.) E2E2-X8MD1 M18 14 mm M30 20 mm NC E2E2-X3D2 NO (See note.) E2E2-X7D1 NC E2E2-X8MD2 NO (See note.) E2E2-X14MD1 NC E2E2-X14MD2 NO (See note.) E2E2-X20MD1 NC E2E2-X20MD2 Note: In addition to the above models, E2E-X@D15 models (e.g., E2E-X3D15), which are different in frequency from the above models, are available. DC 3-wire/Pre-wired Models Size Shielded Sensing distance M12 M18 M30 Unshielded M12 M18 M30 2 mm 5 mm 10 mm 5 mm 10 mm 18 mm Output configuration Model NPN NO E2E2-X2C1 NPN NC E2E2-X2C2 PNP NO E2E2-X2B1 PNP NC E2E2-X2B2 NPN NO E2E2-X5C1 NPN NC E2E2-X5C2 PNP NO E2E2-X5B1 PNP NC E2E2-X5B2 NPN NO E2E2-X10C1 NPN NC E2E2-X10C2 PNP NO E2E2-X10B1 PNP NC E2E2-X10B2 NPN NO E2E2-X5MC1 NPN NC E2E2-X5MC2 PNP NO E2E2-X5MB1 PNP NC E2E2-X5MB2 NPN NO E2E2-X10MC1 NPN NC E2E2-X10MC2 PNP NO E2E2-X10MB1 PNP NC E2E2-X10MB2 NPN NO E2E2-X18MC1 NPN NC E2E2-X18MC2 PNP NO E2E2-X18MB1 PNP NC E2E2-X18MB2 E2E/E2E2 Cylindrical Proximity Sensor 5 DC 3-wire/Connector Models Size Shielded Sensing distance M12 M18 M30 Unshielded M12 M18 M30 2 mm 5 mm 10 mm 5 mm 10 mm 18 mm Output configuration Model NPN NO E2E2-X2C1-M1 NPN NC E2E2-X2C2-M1 PNP NO E2E2-X2B1-M1 PNP NC E2E2-X2B2-M1 NPN NO E2E2-X5C1-M1 NPN NC E2E2-X5C2-M1 PNP NO E2E2-X5B1-M1 PNP NC E2E2-X5B2-M1 NPN NO E2E2-X10C1-M1 NPN NC E2E2-X10C2-M1 PNP NO E2E2-X10B1-M1 PNP NC E2E2-X10B2-M1 NPN NO E2E2-X5MC1-M1 NPN NC E2E2-X5MC2-M1 PNP NO E2E2-X5MB1-M1 PNP NC E2E2-X5MB2-M1 NPN NO E2E2-X10MC1-M1 NPN NC E2E2-X10MC2-M1 PNP NO E2E2-X10MB1-M1 PNP NC E2E2-X10MB2-M1 NPN NO E2E2-X18MC1-M1 NPN NC E2E2-X18MC2-M1 PNP NO E2E2-X18MB1-M1 PNP NC E2E2-X18MB2-M1 AC 2-wire/Pre-wired Models Size Shielded Unshielded 6 Sensing distance M12 2 mm M18 5 mm Operation mode Model NO E2E2-X2Y1 NC E2E2-X2Y2 NO E2E2-X5Y1 NC E2E2-X5Y2 E2E2-X10Y1 M30 10 mm NO NC E2E2-X10Y2 M12 5 mm NO E2E2-X5MY1 M18 10 mm M30 18 mm E2E/E2E2 Cylindrical Proximity Sensor NC E2E2-X5MY2 NO E2E2-X10MY1 NC E2E2-X10MY2 NO E2E2-X18MY1 NC E2E2-X18MY2 AC 2-wire/Connector Models Size Shielded Sensing distance M12 2 mm M18 5 mm M30 Unshielded 10 mm Operation mode Model NO E2E2-X2Y1-M4 NC E2E2-X2Y2-M4 NO E2E2-X5Y1-M4 NC E2E2-X5Y2-M4 NO E2E2-X10Y1-M4 NC E2E2-X10Y2-M4 E2E2-X5MY1-M4 M12 5 mm NO NC E2E2-X5MY2-M4 M18 10 mm NO E2E2-X10MY1-M4 NC E2E2-X10MY2-M4 M30 18 mm NO E2E2-X18MY1-M4 NC E2E2-X18MY2-M4 E2E/E2E2 Cylindrical Proximity Sensor 7 Specifications Ratings/Characteristics E2E E2E-X@D@ DC 2-wire Models M8 Size Type Item M12 M18 M30 Shielded Unshielded Shielded Unshielded Shielded Unshielded Shielded Unshielded E2E-X2D@ E2E-X4MD@ E2E-X3D@ E2E-X8MD@ E2E-X7D@ E2E-X14MD@ E2E-X10D@ E2E-X20MD@ 2 mm 10% 4 mm 10% 3 mm 10% 8 mm 10% 7 mm 10% 14 mm 10% 10 mm 10% 20 mm 10% Set distance (See note 1.) 0 to 1.6 mm 0 to 3.2 mm 0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm 0 to 11.2 mm 0 to 8.0 mm 0 to 16.0 mm Sensing distance Differential travel 15% max. of sensing distance 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 8 x 8 x 1 mm Iron, 20 x 20 x Iron,12 x 12 x Iron,30 x 30 x Iron, 18 x 18 x Iron, 30 x 30 x Iron,30 x 30 x Iron, 54 x 54 x 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm Response speed (See note 2.) 1.0 kHz 1.5 kHz 1.0 kHz 0.8 kHz 0.5 kHz 0.4 kHz 0.4 kHz 0.1 kHz Power supply voltage 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. (operating voltage range) Leakage current 0.8 mA max. Control output 3 to 100 mA Diagnostic output: 50 mA for -D1(5)S models Load current Residual 3 V max. (Load current: 100 mA, Cable length: 2 m. M1J-T models only: 5 V max.) voltage (See note 3.) Indicator D1 Models: Operation indicator (red LED), setting indicator (green LED) D2 Models: Operation indicator (red LED) Operation mode (with sensing object approaching) D1 Models: NO D2 Models: NC For details, refer to Timing Charts. Diagnostic output delay 0.3 to 1 s Protection circuits Surge suppressor, output load short-circuit protection (for control and diagnostic output) Ambient temperature Operating: -25C to 70C, Storage: -40C to 85C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence 15% max. of sensing 10% max. of sensing distance at 23C in the temperature range of -25C to 70C distance at 23C in the temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 500 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67 (Pre-wired models, pre-wired connector models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note 4.) 1,000 m/s2 10 times each in X, Y, and Z directions Connection method Pre-wired models (standard length: 2 m), connector models, pre-wired connector models (standard length: 0.3 m) Weight (packed state) Pre-wired models Approx. 60 g Approx. 70 g Approx. 130 g Approx. 175 g Pre-wired connector models --- Approx. 40 g Approx. 70 g Approx. 110 g Connector models Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g Case Stainless steel (SUS303) Brass-nickel plated Sensing surface PBT (polybutylene terephthalate) Clamping nuts Brass-nickel plated Toothed washer Iron-zinc plated Material Accessories Instruction manual Note 1. Use the E2E within the range in which the setting indicator (green LED) is ON (except D2 models). 2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 3. The residual voltage of each E2E model with the model number suffix "-M1J-T" is 5 V. When connecting an E2E model with the suffix "M1J-T" to a device, make sure that the device can withstand the residual voltage. 4. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 8 E2E/E2E2 Cylindrical Proximity Sensor E2E-X@E@/F@ DC 3-wire Models M8 Size Type Item Shielded M12 Unshielded E2E-X1R5E@/ E2E-X2ME@/ F@ F@ M18 M30 Shielded Unshielded Shielded Unshielded Shielded Unshielded E2E-X2E@/ F@ E2E-X5ME@/ F@ E2E-X5E@/ F@ E2E-X10ME@/ F@ E2E-X10E@/ F@ E2E-X18ME@/ F@ Sensing distance 1.5 mm 10% 2 mm 10% 2 mm 10% 5 mm 10% 5 mm 10% 10 mm 10% 10 mm 10% 18 mm 10% Set distance 0 to 1.2 mm 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 8 x 8 x 1 mm Iron, 12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm Response speed (See note 1.) 2.0 kHz 0.8 kHz Power supply voltage (operating voltage range) (See note 2.) 12 to 24 VDC (10 to 40 VDC), ripple (p-p): 10% max. Current consumption 13 mA max. Control output 0 to 1.6 mm 1.5 kHz 0.4 kHz 0.6 kHz 0.2 kHz 0.4 kHz 0.1 kHz Load current 200 mA max. (See note 2.) Residual voltage 2 V max. (Load current: 200 mA, Cable length: 2 m) Indicator Operation indicator (red LED) Operation mode (with sensing object approaching) E1 F1 Models: NO E2 F2 Models: NC For details, refer to Timing Charts. Protection circuits Power supply reverse polarity protection, surge suppressor, output load short-circuit protection Ambient temperature (See note 2) Operating/Storage: -40C to 85C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no icing) Temperature influence 15% max. of sensing distance at 23C in the temperature range of -40C to 85C 10% max. of sensing distance at 23C in the temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 500 m/s2 10 times each in X, Y, 1,000 m/s2 10 times each in X, Y, and Z directions and Z directions Degree of protection IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note 3.) Connection method Pre-wired models (standard length 2 m), connector models Weight (packed state) Pre-wired models Approx. 65 g Approx. 75 g Approx. 150 g Approx. 195 g Connector models Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g Material Case Stainless steel (SUS303) Brass-nickel plated Sensing surface PBT (polybutylene terephthalate) Clamping nuts Brass-nickel plated Toothed washer Iron-zinc plated Accessories Instruction manual Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 2. When using an E2E with an M8 connector at an ambient temperature range between 70C and 85C, supply 10 to 30 VDC to the E2E and make sure that the E2E has a control output of 100 mA maximum. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. E2E/E2E2 Cylindrical Proximity Sensor 9 E2E-C@C@/B@, E2E-X1C@/B@ DC 3-wire Models 3 dia. Size 4 dia. Type M5 5.4 dia. E2E-X1C@/B@ E2E-C1C@/B@ Shielded Item E2E-CR6C@/B@ E2E-CR8C@/B@ Sensing distance 0.6 mm 15% 0.8 mm 15% 1 mm 15% Set distance 0 to 0.4 mm 0 to 0.5 mm 0 to 0.7 mm Differential travel 15% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron: 3 x 3 x 1 mm Iron: 5 x 5 x 1 mm Response speed (See note.) 2 kHz 3 kHz Power supply voltage (operating voltage range) 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Current consumption 10 mA max. Control output 17 mA max. Load current Open-collector output Open-collector output 100 mA max. (at 30 VDC max.) 80 mA max. (at 30 VDC max.) Residual voltage 1 V max. (Load current: 2 V max. (Load current: 100 mA, Cable length: 2 m) 80 mA, Cable length: 2 m) Indicator Operation indicator (red LED) Operation mode (with sensing object approaching) C1/-B1 Models:NO C2/-B2 Models:NC For details, refer to Timing Charts. Protection circuits Power supply reverse polarity protection, surge suppressor Ambient temperature Operating/Storage: -25C to 70C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% Temperature influence 15% max. of sensing distance at 23C in the temperature range of -25C to 70C Voltage influence 5% max. of sensing distance in the rated voltage range 10% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 500 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 500 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP66 Connection method Pre-wired models (Standard length 2 m) 2.5% max. of sensing distance in the rated voltage range 15% IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note 2.) Weight (packed state) Material Pre-wired models Approx. 60 g Connector models --- Case Stainless steel (SUS303) Pre-wired models (Standard length 2 m), connector models Approx. 12 g Approx. 15 g --- Brass-nickel plated Sensing surface Heat-resistant ABS Clamping nuts --- Toothed washer --Accessories Brass-nickel plated Iron-zinc plated Instruction manual Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 2. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 10 E2E/E2E2 Cylindrical Proximity Sensor E2E-X@Y@ AC 2-wire Models M8 Size Type Item M12 Unshielded Shielded E2E-X1R5Y@ E2E-X2MY@ M18 Shielded Unshielded Shielded Unshielded E2E-X2Y@ E2E-X5MY@ E2E-X5Y@ E2E-X10MY@ M30 Shielded Unshielded E2E-X10Y@ E2E-X18MY@ Sensing distance 1.5 mm 10% 2 mm 10% 2 mm 10% 5 mm 10% 5 mm 10% 10 mm 10% 10 mm 10% 18 mm 10% Set distance 0 to 1.2 mm 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 8 x 8 x 1 mm Response speed 25 Hz Power supply voltage (operating voltage range) (See note 1.) 24 to 240 VAC, 50/60 Hz (20 to 264 VAC) Leakage current 1.7 mA max. Control Load output current (See note 2.) 5 to 100 mA Residual voltage Indicator 0 to 1.6 mm 0 to 8.0 mm 0 to 14.0 mm Iron,12 x 12 x Iron, 12 x 12 x Iron, 15 x 15 x Iron, 18 x 18 x Iron, 30 x 30 x Iron, 30 x 30 x Iron, 54 x 54 x 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 1 mm 5 to 200 mA 5 to 300 mA Refer to Engineering Data. Operation indicator (red LED) Operation mode Y1 Models: NO (with sensing object Y2 Models: NC approaching) For details, refer to Timing Charts. Protection circuit Surge suppressor Ambient temperature Operating/Storage: -25C to Operating/Storage: -40C to 85C (with no icing or condensation) (See notes 1 and 2.) 70C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing 15% max. of sensing distance at 23C in the temperature range of -40C to 85C distance at 23C in the 10% max. of sensing distance at 23C in the temperature range of -25C to 70C temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case (2,000 VAC for M8 Models) Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 500 m/s2 10 times each in X, 1,000 m/s2 10 times each in X, Y, and Z directions Y, and Z directions Degree of protection IEC 60529 IP67 (Pre-wired models: in-house standard for oil resistance (former JEM standard equivalent to IP67g)) (See note 3.) Connection method Pre-wired models (standard length 2 m), connector models Weight Pre-wired (packed models state) Connector models Approx. 60 g Approx. 70 g Approx. 130 g Approx. 175 g Approx. 15 g Approx. 25 g Approx. 40 g Approx. 90 g Material Case Stainless steel (SUS303) Brass-nickel plated Sensing surface PBT (polybutylene terephthalate) Clamping nuts Brass-nickel plated Toothed washer Iron-zinc plated Accessories Instruction manual Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is over -25C. 2. When using an M18-or M30-sized E2E within an ambient temperature of 70C to 85C, make sure that the E2E has a control output of 5 to 200 mA max. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. E2E/E2E2 Cylindrical Proximity Sensor 11 AC/DC 2-wire Models Size M12 M18 Type M30 Shielded Item E2E-X3T1 E2E-X7T1 E2E-X10T1 Sensing distance 3 mm 10% 7 mm 10% 10 mm 10% Set distance 0 to 2.4 mm 0 to 5.6 mm 0 to 8.0 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 12 x 12 x 1 mm Iron, 18 x 18 x 1 mm Iron, 30 x 30 x 1 mm Response speed (See note 1.) DC 1.0 kHz 0.5 kHz 0.4 kHz AC 25 Hz Power supply voltage 24 to 240 VDC (20 to 264 VDC)/48 to 240 VAC (40 to 264 VAC) (operating voltage range) (See note 2.) Leakage current Control output 1 mA DC max., 2 mA AC max. Load current 5 to 100 mA Residual voltage 6.0 VDC max. (Load current: 100 mA, Cable length: 2 m) 10 VAC max. (Load current: 5 mA, Cable length: 2 m) Indicator Operation indicator (red LED), setting indicator (green LED) Operation mode (with sensing object approaching) NO For details, refer to Timing Charts. Protection circuits Output load short-circuit protection (at 20 to 40 VDC), Surge suppressor Ambient temperature Operating: -25C to 70C, Storage: -40C to 85C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C in the temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 1,000 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67 In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.) Connection method Pre-wired Models (standard length 2 m) Weight (packed state) Material Approx. 80 g Case Approx. 140 g Approx. 190 g Brass-nickel plated Sensing surface PBT (polybutylene terephthalate) Clamping nuts Brass-nickel plated Toothed washer Iron-zinc plated Accessories Instruction manual Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 2. Power supply voltage waveform: Use a sine wave for the power supply. Using a rectangular AC power supply may result in faulty reset. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 12 E2E/E2E2 Cylindrical Proximity Sensor E2E2 E2E2-X@D@ DC 2-wire Models M12 Size Type Item M18 M30 Shielded Unshielded Shielded Unshielded Shielded Unshielded E2E2-X3D@ E2E2-X8MD@ E2E2-X7D@ E2E2-X14MD@ E2E2-X10D@ E2E2-X20MD@ Sensing distance 3 mm 10% 8 mm 10% 7 mm 10% 14 mm 10% 10 mm 10% 20 mm 10% Set distance (See note 1.) 0 to 2.4 mm 0 to 6.4 mm 0 to 5.6 mm 0 to 11.2 mm 0 to 8.0 mm 0 to 16.0 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 12 x 12 x 1 mm Response speed (See 1.0 kHz note 2.) Iron, 30 x 30 x 1 mm Iron, 18 x 18 x 1 mm Iron, 30 x 30 x 1 mm Iron, 30 x 30 x 1 mm Iron, 54 x 54 x 1 mm 0.8 kHz 0.5 kHz 0.4 kHz 0.4 kHz 0.1 kHz Power supply voltage (operating voltage range) 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. Leakage current 0.8 mA max. Control output Load current 3 to 100 mA Residual voltage 3.0 V max. (Load current: 100 mA, Cable length: 2 m) Indicator D1 Models: Operation indicator (red LED), setting indicator (green LED) D2 Models: Operation indicator (red LED) Operation mode (with sensing object approaching) D1 Models: NO D2 Models: NC For details, refer to Timing charts. Protection circuits Surge suppressor, output load short-circuit protection Ambient temperature Operating/Storage: -25C to 70C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence 10% max. of sensing distance at 23C in the temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 1,000 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67 In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.) Connection method Pre-wired models (standard length 2 m) Weight (packed state) Approx. 65 g Material Case Brass Sensing surface PBT (polybutylene terephthalate) Approx. 150 g Approx. 210 g Clamping Brass-nickel plated nuts Toothed washer Accessories Iron-zinc plated Instruction manual Note 1. Use the E2E2 within the range in which the setting indicator (green LED) is lit (except D2 models). 2. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. E2E/E2E2 Cylindrical Proximity Sensor 13 E2E2-X@C@/B@ DC 3-wire Models M12 Size Type Item M18 M30 Shielded Unshielded Shielded Unshielded Shielded Unshielded E2E2-X2C@/ B@ E2E2-X5MC@/B@ E2E2-X5C@/ B@ E2E2-X10MC@/ B@ E2E2-X10C@/ B@ E2E2-X18MC@/ B@ Sensing distance 2 mm 10% 5 mm 10% 5 mm 10% 10 mm 10% 10 mm 10% 18 mm 10% Set distance 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 12 x 12 x 1 mm Iron, 15 x 15 x 1 mm Iron, 18 x 18 x 1 mm Iron, 30 x 30 x 1 mm Iron, 30 x 30 x 1 mm Iron, 54 x 54 x 1 mm Response speed (See note 1.) 1.5 kHz 0.4 kHz 0.6 kHz 0.2 kHz 0.4 kHz 0.1 kHz Power supply voltage (operating voltage range) (See note.) 12 to 24 VDC (10 to 55 VDC), ripple (p-p): 10% max. Current consumption 13 mA max. Control output Load current 200 mA max., open collector (55 VDC max.) Residual voltage 2 V max. (Load current: 200 mA, Cable length: 2 m) Indicator Operation indicator (red LED) Operation mode (with sensing object approaching) B1/C1 Models: NO B2/C2 Models: NC For details, refer to Timing Charts. Protection circuits Surge suppressor, output load short-circuit protection, power supply reverse polarity protection Ambient temperature Operating/Storage: -40C to 85C (with no icing or condensation) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence 15% max. of sensing distance at 23C in the temperature range of -40C to 85C 10% max. of sensing distance at 23C in the temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 1,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 1,000 m/s2 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67 In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.) Connection method Pre-wired models (standard length: 2 m) Weight (packed state) Approx. 75 g Material Case Brass Sensing surface PBT (polybutylene terephthalate) Approx. 160 g Approx. 220 g Clamping Brass-nickel plated nuts Toothed washer Accessories Iron-zinc plated Instruction manual Note 1. The response speed is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance. 2. An unsmoothed full-wave rectification power supply of 24 VDC 20% (average value) can be used. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. 14 E2E/E2E2 Cylindrical Proximity Sensor E2E2-X@Y@ AC 2-wire Models M12 Size Type Item M18 M30 Shielded Unshielded Shielded Unshielded Shielded Unshielded E2E2-X2Y@ E2E2-X5MY@ E2E2-X5Y@ E2E2-X10MY@ E2E2-X10Y@ E2E2-X18MY@ Sensing distance 2 mm 10% 5 mm 10% 5 mm 10% 10 mm 10% 10 mm 10% 18 mm 10% Set distance 0 to 1.6 mm 0 to 4.0 mm 0 to 4.0 mm 0 to 8.0 mm 0 to 8.0 mm 0 to 14.0 mm Differential travel 10% max. of sensing distance Sensing object Ferrous metal (The sensing distance decreases with non-ferrous metal, refer to Engineering Data.) Standard sensing object Iron, 12 x 12 x 1 mm Iron, 15 x 15 x 1 mm Iron, 18 x 18 x 1 mm Response speed 25 Hz Power supply voltage (operating voltage range) (See note 1.) 24 to 240 VAC, 50/60 Hz (20 to 264 VAC) Leakage current 1.7 mA max. Control output Load current (See note 2.) 5 to 200 mA Residual voltage Refer to Engineering Data. Iron, 30 x 30 x 1 mm Iron, 30 x 30 x 1 mm 5 to 300 mA Indicator Operation indicator (red LED) Operation mode (with sensing object approaching) Y1 Models: NO Y2 Models: NC For details, refer to Timing Charts. Ambient temperature Operating/Storage: -40C to 85C (with no icing or condensation) (See notes 1 and 2.) Ambient humidity Operating/Storage: 35% to 95% (with no condensation) Temperature influence 15% max. of sensing distance at 23C in the temperature range of -40C to 85C 10% max. of sensing distance at 23C in the temperature range of -25C to 70C Voltage influence 1% max. of sensing distance in the rated voltage range 15% Insulation resistance 50 M min. (at 500 VDC) between current-carrying parts and case Dielectric strength 4,000 VAC at 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions Shock resistance 1,000 m/s2, 10 times each in X, Y, and Z directions Degree of protection IEC 60529 IP67 In-house standard for oil resistance (former JEM standard equivalent to IP67g) (See note 3.) Connection method Pre-wired models (standard length: 2 m) Weight (packed state) Approx. 65 g Material Case Brass Sensing surface PBT (polybutylene terephthalate) Clamping nuts Brass-nickel plated Toothed washer Iron-zinc plated Accessories Iron, 54 x 54 x 1 mm Approx. 150 g Approx. 210 g Instruction manual Note 1. When supplying 24 VAC to any of the above models, make sure that the operating ambient temperature range is -25C to 85C. 2. When using an M18-or M30-sized E2E2 within an ambient temperature of 70C to 85C, make sure that the E2E2 has a control output of 5 to 200 mA maximum. 3. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former JEM standard. E2E/E2E2 Cylindrical Proximity Sensor 15 Engineering Data E2E Operating Range (Typical) Shielded Models E2E-X@D@ E2E-X@T1 E2E-X@E@/F@ E2E-X@Y@ 8 E2E-X7 6 E2E-X3 E2E-X2 Y 4 X 2 -15 -10 -5 0 5 E2E-X10 10 Y 8 6 E2E-X5 E2E-X2 4 E2E -X1R5 2 0 -15 10 15 20 Distance Y (mm) X -10 -5 0 5 10 15 Distance Y (mm) E2E-X@ME@/F@ E2E-X@MY@ 30 30 20 E2E-X20M 15 10 Y X E2E-X8M 5 0 -30 16 E2E-X14M E2E-X4M -20 -10 0 10 20 30 Distance Y (mm) Sensing distance X (mm) Sensing distance X (mm) Y 25 X 25 20 E2E-X18M 15 E2E-X10M 10 E2E-X5M E2E-X2M 5 0 -30 Y 1.4 X 1.2 E2E-X1/E2E-C1 1.0 0.8 E2E-CR8 0.6 E2E-CR6 0.4 0.2 Unshielded Models E2E-X@MD@ Sensing distance X (mm) E2E-X10 10 0 -20 1.6 12 Sensing distance X (mm) Sensing distance X (mm) 12 E2E-C@C@/B@ E2E-X@C@/B@ -20 -10 E2E/E2E2 Cylindrical Proximity Sensor 0 10 20 30 Distance Y (mm) 0 -3.0 -2.0 -1.0 0 1.0 2.0 3.0 Distance Y (mm) Leakage Current (Typical) E2E-X2D1-N E2E-X7D1-N E2E-X@T1 DC/AC AC power supply Proximity Sensor (when OFF) Leakage current (mA) E2E-X10D1-N E2E-X3D1-N Leakage current (mA) E2E-X@Y@ Leakage current (mA) E2E-X@D@ Protective resistance AC power supply Supply voltage (V) DC power supply Supply voltage (V) Supply voltage (V) Residual Output Voltage (Typical) E2E-X@T1 E2E-X@D@ 200 VAC 4 E2E-X@D1-M1J-T 3 E2E-X@D@ 2 1 0 1 3 5 10 30 50 Residual output voltage (V) Residual output voltage (V) 5 100 VAC 24 VDC 100 Load current (mA) Load current (mA) E2E-X@Y@ 24 VAC 100 VAC 200 VAC Residual output voltage Residual output voltage Proximity Sensor 24 VAC Residual load voltage OFF Load current (mA) Proximity Sensor 100 VAC Residual load voltage OFF Load current (mA) Load voltage VL (V) Load voltage VL (V) Load voltage VL (V) Residual output voltage Proximity Sensor 200 VAC Residual load voltage OFF Load current (mA) E2E/E2E2 Cylindrical Proximity Sensor 17 Sensing Distance vs. Sensing Object (Typical) E2E-X2D@ E2E-X3D@ E2E-X3T1 E2E-X7D@ E2E-X7T1 t = 1 mm Stainless steel (SUS304) Brass Aluminum Copper Side length of sensing object d (mm) Iron Stainless steel (SUS304) Brass Aluminum Copper Iron Sensing distance (mm) Iron Sensing distance (mm) Sensing distance (mm) t = 1 mm Side length of sensing object d (mm) E2E-X10D@ E2E-X10T1 Stainless steel (SUS304) t = 1 mm Side length of sensing object d (mm) E2E-X4MD@ E2E-X8MD@ Copper t = 1 mm Side length of sensing object d (mm) E2E-X14MD@ t = 1 mm Iron Stainless steel (SUS304) Brass Aluminum Copper Sensing distance (mm) Sensing distance (mm) Stainless steel (SUS304) Brass Aluminum Sensing distance (mm) t = 1 mm Iron Side length of sensing object d (mm) E2E-X20MD@ Stainless steel (SUS304) Brass Aluminum Copper E2E-X1R5E@/F@ E2E-X1R5Y@ t = 1 mm Stainless steel (SUS304) Brass Aluminum Copper Side length of sensing object d (mm) Stainless steel (SUS304) Brass Aluminum Copper t = 1 mm Side length of sensing object d (mm) E2E/E2E2 Cylindrical Proximity Sensor Sensing distance (mm) Iron Iron Sensing distance (mm) Sensing distance (mm) Iron Side length of sensing object d (mm) t = 1 mm 18 Brass Aluminum Copper Iron Stainless steel (SUS304) Brass Aluminum Side length of sensing object d (mm) E2E-X2E@/F@ E2E-X2Y@ E2E-X5E@/F@ E2E-X5Y@ E2E-X10E@F@ E2E-X10Y@ t = 1 mm Brass Iron Stainless steel (SUS304) Brass Aluminum Aluminum Side length of sensing object d (mm) E2E-X2ME@/F@ E2E-X2MY@ Sensing distance X (mm) Stainless steel (SUS304) Sensing distance X (mm) Sensing distance X (mm) t = 1 mm Iron Side length of sensing object d (mm) E2E-X5ME@/F@ E2E-X5MY@ Iron Stainless steel (SUS304) Brass t = 1 mm Aluminum Side length of sensing object d (mm) E2E-X10ME@/F@ E2E-X10MY Stainless steel (SUS304) Brass Aluminum t = 1 mm Copper Iron Stainless steel (SUS304) Brass Sensing distance X (mm) Iron Sensing distance X (mm) Sensing distance X (mm) t = 1 mm Iron Stainless steel (SUS304) Brass t = 1 mm Aluminum Side length of sensing object d (mm) E2E-X18ME@/F@ E2E-X18MY@ Side length of sensing object d (mm) Side length of sensing object d (mm) E2E-CR8@@ E2E-CR6@@ 0.7 t = 1 mm Brass Aluminum 0.6 Iron 0.5 Stainless steel (SUS304) Aluminum 0.3 0.2 @d X t = 1 mm Iron Stainless steel (SUS304) Brass Aluminum Copper 0.1 0 Side length of sensing object d (mm) Brass 0.4 Sensing distance X (mm) Stainless steel (SUS304) Sensing distance X (mm) Sensing distance X (mm) t = 1 mm Iron Aluminum 5 10 15 20 Side length of sensing object d (mm) Side length of sensing object d (mm) Sensing distance X (mm) E2E-X1@@ E2E-C1@@ Iron Stainless steel (SUS304) Brass Aluminum t = 1 mm Side length of sensing object d (mm) E2E/E2E2 Cylindrical Proximity Sensor 19 E2E2 Operating Range (Typical) Shielded Models E2E2-X@D@ E2E2-X@C@/B@ E2E2-X@Y@ 3.0 8 E2E2-X7 6 4 Y E2E2-X3 X 2 0 -20 -15 -10 -5 0 5 10 15 2.5 Y 2.0 X E2E2-X2 1.5 1.0 0.5 0 20 12 Sensing Distance X (mm) E2E2-X10 10 Sensing Distance X (mm) Sensing Distance X (mm) 12 -15 -10 -5 0 5 Distance Y (mm) Y 8 X 6 E2E2-X5 4 2 0 10 15 Distance Y (mm) E2E2-X10 10 -15 -10 -5 0 5 15 10 Distance Y (mm) Unshielded Models E2E2-X@MD@ E2E2-X@MC@/B@ E2E2-X@MY@ 6 30 30 E2E2-X20M 15 E2E2-X14M 10 Y E2E2-X8M X 5 0 -30 -20 -10 0 10 5 E2E2-X5M Y 4 X 3 2 1 0 20 30 Distance Y (mm) -8 -6 -4 -2 0 2 4 E2E2-X@D@ E2E2-X@Y@ Leakage current (mA) Leakage current (mA) 20 6 8 Distance Y (mm) Leakage Current (Typical) Supply voltage (V) Sensing Distance X (mm) 20 Sensing Distance X (mm) Sensing Distance X (mm) Y 25 Proximity Sensor (when OFF) Protective resistance AC power supply Supply voltage (V) E2E/E2E2 Cylindrical Proximity Sensor X 25 20 E2E2-X18M 15 E2E2-X10M 10 5 0 -30 -20 -10 0 10 20 30 Distance Y (mm) Residual Output Voltage (Typical) Residual output voltage (V) E2E2-X@D@ Load current (mA) 100 VAC Proximity Sensor 24 VAC Residual load voltage OFF 200 VAC Residual output voltage Residual output voltage Proximity Sensor 100 VAC Residual load voltage Residual load voltage V (V) Residual output voltage Residual load voltage V (V) Residual load voltage V (V) E2E2-X@Y@ 24 VAC OFF Proximity Sensor 200 VAC Residual load voltage OFF Load current (mA) Load current (mA) Load current (mA) Sensing Distance vs. Sensing Object (Typical) E2E2-X3D@ E2E2-X7D@ E2E2-X10D@ Stainless steel (SUS304) Brass Aluminum Copper Side length of sensing object d (mm) Iron Stainless steel (SUS304) Brass Aluminum Copper t= 1 mm Side length of sensing object d (mm) Sensing distance (mm) Iron Sensing distance (mm) Sensing distance (mm) t= 1 mm Iron Stainless steel (SUS304) Brass Aluminum Copper t= 1 mm Side length of sensing object d (mm) E2E/E2E2 Cylindrical Proximity Sensor 21 E2E2-X8MD@ E2E2-X14MD@ Stainless steel (SUS304) Brass Aluminum Copper Sensing distance (mm) Iron Side length of sensing object d (mm) Iron Stainless steel (SUS304) Brass Aluminum Copper Sensing distance (mm) t=1 mm t=1 mm Sensing distance (mm) E2E2-X20MD@ Side length of sensing object d (mm) E2E2-X2C@/B@ E2E2-X2Y@ Iron Stainless steel (SUS304) Brass Aluminum Copper t=1 mm Side length of sensing object d (mm) E2E2-X5C@/B@ E2E2-X5Y@ E2E2-X10C@/B@ E2E2-X10Y@ t=1 mm Brass Aluminum Iron Stainless steel (SUS304) Brass E2E2-X10MC@/B@ E2E2-X10MY@ Brass t=1 mm Aluminum E2E2-X18MC@/B@ E2E2-X18MY@ Iron Stainless steel (SUS304) Brass Iron Stainless steel (SUS304) Brass t-=1 mm Aluminum Sensing distance (mm) t-=1 mm Sensing distance (mm) Sensing distance (mm) Stainless steel (SUS304) Side length of sensing object d (mm) Side length of sensing object d (mm) t = 1 mm Iron Stainless steel (SUS304) Brass Aluminum Aluminum Side length of sensing object d (mm) 22 Iron Aluminum Side length of sensing object d (mm) E2E2-X5MC@/B@ E2E2-X5MY@ Sensing distance (mm) Stainless steel (SUS304) Sensing distance (mm) Sensing distance (mm) t = 1 mm Iron Side length of sensing object d (mm) E2E/E2E2 Cylindrical Proximity Sensor Side length of sensing object d (mm) Output Circuits and Timing Charts Output Circuits E2E E2E-X@D@ DC 2-wire Models E2E-X@D1 Without Diagnostic Output E2E-X@D1-M1J-T No Polarity 1 4 Load Brown Proximity sensor main circuit E2E-X@D1S With Diagnostic Output Proximity sensor main circuit 4 Load Load (0 V) Load Proximity sensor main circuit 3 Blue 4 Brown Orange (diagnostic output) 2 0V 0V Blue 3 Note: 1. The load can be connected to Note: 1. The load can be connected to either the +V or 0 V side. either the +V or 0 V side. 2. The pin numbers in the above diagram 2. The E2E-X@D1-M1J-T has no are for the -M@G(J). For the -M1, pin 4 polarity. Therefore, terminals 3 is +V and pin 3 is 0 V. and 4 have no polarity. 0V Note: Connect both the loads to the +V side of the control output and diagnostic output. E2E-X@D2 Without Diagnostic Output 1 Load Brown Proximity sensor main circuit 2 Blue 0V Note: 1. The load can be connected to either the +V or 0 V side. 2. The pin numbers in the above diagram are for the -M@G. For -M1 models, pin 2 is +V and pin 3 is 0 V. DC 3-wire Models E2E-X@E@ NPN Output E2E-X@F@ PNP Output Brown 1 Brown 1 100 Proximity sensor main circuit ** Constant current* Proximity sensor main circuit Load Black 4 (or 2)** Blue 3 Black 4 (or 2)*** Load * 100 * Constant current output is 1.5 to 3 mA. ** Pin 4 is an NO contact, and pin 2 is an NC contact. E2E-C/X@C@ NPN Open-collector Output 0V Blue 3 0V * Constant current output is 1.5 to 3 mA. ** When connecting to a Tr circuit. *** Pin 4 is an NO contact, and pin 2 is an NC contact. E2E-C/X@B@ PNP Open-collector Output Brown 1 Brown 1 100 Load Proximity sensor main circuit Proximity sensor main circuit Black 4 Output Black 4 Load Blue 3 0V * E2E-CR6@ has no 100- resistance. 100 Blue 3 0V * E2E-CR6@ has no 100- resistance. E2E/E2E2 Cylindrical Proximity Sensor 23 E2E-X@Y@ AC 2-wire Models E2E-X@T1 AC/DC 2-wire Models Brown Load Brown 3 (or 1) Load Proximity sensor main circuit Proximity sensor main circuit 24 to 240 VDC 48 to 240 VAC Power supply Blue Blue 4 (or 2) Note: The load can be connected to either the +V or 0 V side. There is no need to be concerned about the polarity (Brown/Blue) of the Proximity Sensor. Note: For connector models, the connection between pins 3 and 4 uses an NO contact, and the connection between pins 1 and 2 uses an NC contact. E2E2 E2E2-X@D@ DC 2-wire Models Load Brown Proximity sensor main circuit Blue 0V Note: The load can be connected to either the +V or 0 V side. E2E2-X@C@ DC 3-wire Models E2E2-X@B@ DC 3-wire Models Brown 1 Brown 1 +V 100 +V Load Proximity sensor main circuit Proximity sensor main circuit Black 4 (or 2)* Black 4 (or 2)* Load 100 Blue 3 0V * Pin 4 is an NO contact, and pin 2 is an NC contact. 0V * Pin 4 is an NO contact, and pin 2 is an NC contact. E2E2-X@Y@ DC 2-wire Models Brown 2 Load Proximity sensor main circuit Blue 3 24 Blue 3 E2E/E2E2 Cylindrical Proximity Sensor Timing Charts E2E E2E-X@D@ DC 2-wire Models E2E-X@T1 AC/DC 2-wire Models E2E-X@D1 E2E-X@T1 NO Models E2E-X@D2 NC Models Set position Unstable Stable sensing sensing area area Non-sensing area Proximity Sensor Sensing object Non-sensing area Sensing area Proximity Sensor ON OFF ON OFF ON OFF Setting indicator (green) Rated sensing distance Rated sensing distance Sensing object Operation indicator (red) ON Control output ON OFF OFF Operation indicator (red) Control output E2E-X@D1S Non-sensing area Set position Unstable Stable sensing sensing area area Proximity Sensor Rated sensing distance Sensing object ON OFF ON OFF ON OFF ON OFF Setting indicator (green) Operation indicator (red) Note: The diagnostic output of the E2E-X@D1S is ON when there is a coil burnout or the sensing object is located in the unstable sensing range for 0.3 s or more. Control output Diagnostic output (see note) DC 3-wire Models E2E-X@E@ NPN Output E2E-X@F@ PNP Output Sensing object Yes No ON Operation indicator (red) OFF ON Control output between brown and black lines OFF H Output voltage L between black and blue lines Sensing Yes object No Operation ON indicator (red) OFF Control output ON between black and blue lines OFF Output voltage ON between black and blue lines OFF E2E-C/X@C@/B@ NPN/PNP Open-collector Output Yes No Operation ON indicator (red) OFF Sensing object Control output ON OFF E2E/E2E2 Cylindrical Proximity Sensor 25 E2E-X@Y@ AC 2-wire Models Yes No Operation ON indicator (red) OFF Sensing object Control output ON OFF E2E2 E2E2-X@D@ DC 2-wire Models Non-sensing area Set position Unstable Stable sensing sensing area area NC Models Proximity Sensor Sensing object Rated sensing distance ON Setting indicator (green) ON OFF Operation indicator (red) ON OFF Operation indicator (red) ON Control output ON Control output NPN/PNP Open-collector Output Control output Yes No ON OFF ON OFF E2E2-X@Y@ AC 2-wire Models Sensing object Operation indicator (red) Control output 26 Proximity Sensor OFF E2E2-X@C@/B@ DC 3-wire Models Operation indicator (red) Sensing area Sensing object OFF Sensing object Non-sensing area Rated sensing distance NO Models Yes No ON OFF ON OFF E2E/E2E2 Cylindrical Proximity Sensor OFF Installation Connection E2E E2E-X@D@ DC 2-wire Models (Without Diagnostic Output) E2E-X@D1S DC 3-wire Models (With Diagnostic Output) E2E-X@D1-M1J-T DC 2-wire Models (No Polarity) E2E-X@Y@ AC 2-wire Models E2E-X@Y@ AC 2-wire Models Brown E2E-X@T1 AC/DC 2-wire Models Brown Orange Load Blue Load Brown Load Power supply Note: The control output and diagnostic output share the negative common terminal. Therefore, the loads must be connected to the positive sides of the control output and diagnostic output. Blue Brown Power supply Blue E2E-X@T1 AC/DC 2-wire Models Load Power supply Blue Note: There is no need to be concerned about the polarity (Brown/Blue) of the Proximity Sensor. Load Note: The load can be connected as shown above. Connected to PC E2E-X@D@ DC 2-wire Models E2E-X@E@ DC 3-wire Models Brown Brown Black Blue Blue 24 VDC 24 VDC Connected to Relay Load E2E-X@D@ DC 2-wire Models E2E-X@E@ DC 3-wire Models Brown 24 VDC Blue E2E-X@F@ DC 3-wire Models Brown Brown Black Black Blue Blue E2E/E2E2 Cylindrical Proximity Sensor 27 E2E2 E2E2-X@D@ DC 2-wire Models E2E2-X@Y@ AC 2-wire Models Brown Brown Load Power supply Power supply Blue Blue Load Note: The load can be connected as shown in the above diagrams. Connected to PC E2E2-X@D@ DC 2-wire Models E2E2-X@C@ DC 3-wire Models Brown Brown Black Blue 24 VDC 28 E2E/E2E2 Cylindrical Proximity Sensor Blue 24 VDC Pin Arrangement E2E-X@D@-M@ DC 2-wire Models Connector SelfOperadiagnostic tion output mode M12 No NO Applicable models Pin arrangement E2E-X@D1-M1G@ (See note.) Load Load Note: Terminals 2 and 3 are not used. E2E-X@D1-M1J-T Load or or Load Note: 1. Terminals 1 and 2 are not used. 2. Terminals 3 and 4 has no polarity. E2E-X@D1-M1 Load Load Note: Terminals 1 and 2 are not used. NC E2E-X@D2-M1G (See note.) Load Load Note: Terminals 3 and 4 are not used. E2E-X@D2-M1 Load Load Note: Terminal 1 is not used. Yes NO E2E-X@D1S-M1 (Self-diagnostic output) Load Load M8 No NO Note: Terminals 1 is not used. E2E-X@D1-M3G Load Load Note: Terminals 2 and 3 are not used. NC E2E-X@D2-M3G Load Load Note: Terminals 3 and 4 are not used. Note: The above pin arrangements conform to IEC standards. E2E/E2E2 Cylindrical Proximity Sensor 29 E2E-X@E/F@-M@ DC 3-wire Models Connector M12 Operation mode NO Applicable models Pin arrangement E2E-X@E1-M1 Load Note: Terminal 2 is not used. Load Note: Terminal 2 is not used. E2E-X@F1-M1 NC E2E-X@E2-M1 Load Note: Terminal 4 is not used. E2E-X@F2-M1 Note: Terminal 4 is not used. Load M8 NO E2E-X@E1-M3 Note: Terminal 2 is not used. Load E2E-X@F1-M3 Note: Terminal 2 is not used. Load NC E2E-X@E2-M3 Note: Terminal 4 is not used. Load E2E-X@F2-M3 Note: Terminal 4 is not used. Load 30 E2E/E2E2 Cylindrical Proximity Sensor E2E-CR8C@/CR8B@/X1C@/X1B@-M5 DC 3-wire Models Connector M8-3pin Operation mode Applicable models NO/NC Pin arrangement E2E-CR8C@-M5 E2E-X1C@-M5 DC 4 1 3 Load NO/NC E2E-CR8B@-M5 E2E-X1B@-M5 DC 4 1 3 Load E2E-X@Y@-M1 AC 2-wire Models Operation mode Applicable models NO Pin arrangement E2E-X@Y1-M1 Load Load Note: Terminals 1 and 2 are not used. NC E2E-X@Y2-M1 Load Load Note: Terminals 3 and 4 are not used. Precautions Mounting Refer to the following to mount the E2E-CR6, -CR8 and E2E-C1 non-screw models. Do not tighten the nut with excessive force. A washer must be used with the nut. E2E-CR6: 9 to 21 mm E2E-CR8, -C1: 8 to 21 mm M3 hole No screw is provided with the E2E-CR6, -CR8 or E2E-C1. Shielded Model Unshielded Model Tighten the screw to a torque of 0.2 N*m maximum to secure the E2E-CR6, -CR8 and a torque of 0.4 N*m maximum to secure the E2E-C1. Part B Part A Part B Part A Note: The table below shows the tightening torques for part A and part B nuts. In the previous examples, the nut is on the sensor head side (part B) and hence the tightening torque for part B applies. If this nut is in part A, the tightening torque for part A applies instead. Model Part A Length M5 M8 Part B Torque Torque 1 N*m Shielded 9 mm Unshielded 3 mm M12 30 N*m M18 70 N*m M30 180 N*m 9 N*m 12 N*m E2E/E2E2 Cylindrical Proximity Sensor 31 Influence of Surrounding Metal When mounting the E2E within a metal panel, ensure that the clearances given in the following table are maintained. Failure to maintain these distances may cause deterioration in the performance of the sensor. d dia. Model Shielded E2E-X@D@ DC 2-wire E2E-X@T1 AC/DC 2-wire E2E2-X@D@ DC 2-wire Unshielded E2E-X@E@ E2E-X@F@ DC 3-wire Shielded E2E-X@Y@ AC 2-wire E2E2-X@B@ E2E2-X@C@ DC 3-wire Unshielded E2E2-X@Y@ AC 2-wire Item l 32 Shielded M12 M18 M30 d 8 mm D 0 mm m 4.5 mm 8 mm 20 mm 40 mm n 12 mm 18 mm 27 mm 45 mm l 12 mm 15 mm 22 mm 30 mm d 24 mm 40 mm 70 mm 90 mm D 12 mm 15 mm 22 mm 30 mm 12 mm 18 mm 30 mm m 8 mm 20 mm 40 mm 70 mm n 24 mm 40 mm 70 mm 90 mm l 0 mm 12 mm 18 mm 30 mm d 8 mm D 0 mm m 4.5 mm 8 mm 20 mm 40 mm n 12 mm 18 mm 27 mm 45 mm l 6 mm 15 mm 22 mm 30 mm d 24 mm 40 mm 55 mm 90 mm D 6 mm 15 mm 22 mm 30 mm m 8 mm 20 mm 40 mm 70 mm n 24 mm 36 mm 54 mm 90 mm Model E2E-X@C@ E2E-X@B@ E2E-C@C@ E2E-C@B@ DC 3-wire M8 0 mm Item 3 dia. l 0 mm d 3 mm D 0 mm m n 4 dia. M5 5.4 dia. 4 mm 5 mm 5.4 mm 2 mm 2.4 mm 3 mm 3 mm 6 mm 6 mm 8 mm 8 mm E2E/E2E2 Cylindrical Proximity Sensor Relationship between Sizes and Models E2E Model 3 dia. Shielded Model No. E2E-CR6C@ E2E-CR6B@ 4 dia. E2E-CR8C@ E2E-CR8B@ M5 E2E-X1C@ E2E-X1B@ 5.4 dia. E2E-C1C@ E2E-C1B@ M8 M12 M18 M30 Shielded E2E-X2D@ E2E-X1R5E@/F@ E2E-X1R5Y@ Unshielded E2E-X4MD@ E2E-X2ME@/F@ E2E-X2MY@ Shielded E2E-X3D@ E2E-X2E@/F@ E2E-X2Y@ E2E-X3T1 Unshielded E2E-X8MD@ E2E-X5ME@/F@ E2E-X5MY@ Shielded E2E-X7D@ E2E-X5E@/F@ E2E-X5Y@ E2E-X7T1 Unshielded E2E-X14MD@ E2E-X10ME@/F@ E2E-X10MY@ Shielded E2E-X10D@ E2E-X10E@/F@ E2E-X10Y@ E2E-X10T1 Unshielded E2E-X20MD@ E2E-X18ME@/F@ E2E-X18MY@ E2E2 Model M12 M18 M30 Model No. Shielded E2E2-X3D@ E2E2-X2C@/B@ E2E2-X2Y@ Unshielded E2E2-X8MD@ E2E2-X5MC@/B@ E2E2-X5MY@ Shielded E2E2-X7D@ E2E2-X5C@/B@ E2E2-X5Y@ Unshielded E2E2-X14MD@ E2E2-X10MC@/B@ E2E2-X10MY@ Shielded E2E2-X10D@ E2E2-X10C@/B@ E2E2-X10Y@ Unshielded E2E2-X20MD@ E2E2-X18MC@/B@ E2E2-X18MY@ E2E/E2E2 Cylindrical Proximity Sensor 33 Mutual Interference When installing two or more Sensors face to face or side by side, ensure that the minimum distances given in the following table are maintained. B A Model Item M8 M12 M18 50 (30) mm M30 Shielded A B 15 mm 20 (12) mm 35 (18) mm 70 (35) mm E2E-X@T1 AC/DC 2-wire Unshielded A 80 mm 120 (60) mm 200 (100) mm 300 (100) mm B 60 mm 100 (50) mm 110 (60) mm 200 (100) mm A 20 mm 30 (20) mm 50 (30) mm 100 (50) mm B 15 mm 20 (12) mm 35 (18) mm 70 (35) mm A 80 mm 120 (60) mm 200 (100) mm 300 (100) mm B 60 mm 100 (50) mm 110 (60) mm 200 (100) mm E2E2-X@D@ DC 2-wire E2E-X@E@ E2E-X@F@ DC 3-wire E2E-X@Y@ AC 2-wire Shielded Unshielded 20 mm 30 (20) mm E2E-X@D@ DC 2-wire 100 (50) mm E2E2-X@B@ E2E2-X@C@ DC 3-wire E2E2-X@Y@ AC 2-wire Model E2E-X@B@ E2E-X@C@ E2E-C@B@ E2E-C@C@ DC 3-wire Shielded Item 3 dia. A 20 mm B 15 mm Note: Values in parentheses apply to Sensors operating at different frequencies. 34 E2E/E2E2 Cylindrical Proximity Sensor 4 dia. M5 5.4 dia. WARNING This product is not designed or rated for ensuring safety of persons. Do not use it for such purposes. Precautions for Safe Use The colors in parentheses are previous wire colors. Item Power supply Do not impose an excessive voltage on the E2E/E2E2, otherwise it may explode or burn. Do not impose 100 VAC on any E2E/E2E2 DC Model, otherwise it may explode or burn. Examples DC 3-wire Models DC 2-wire Models Brown Brown Sensor Incorrect Black Do not short-circuit the load, or the E2E/E2E2 may explode or burn. The E2E/E2E2's short-circuit protection function is valid if the polarity of the supply voltage imposed is correct and within the rated voltage range. Incorrect Sensor Blue Load short-circuit Load Load Blue DC 3-wire Models (NPN output) Brown Load (Load shortcircuit) Sensor Black Blue Incorrect DC 2-wire Models The following diagram shows that the load is short-circuited while the polarity of the supply voltage imposed on the E2E/E2E2 is wrong, in which case the E2E/E2E2 may explode or burn. Load Brown (Load short-circuit) Incorrect Sensor Blue Wiring Be sure to wire the E2E/E2E2 and load correctly, otherwise it may explode or burn. DC 3-wire Models (NPN output) Load Brown Brown Sensor Load Incorrect Black Make sure to connect a proper load to the E2E/E2E2 in operation, otherwise it may explode or burn. DC 3-wire Models Brown Incorrect Blue Black Blue Connection with no load Sensor AC 2-wire Models Load Load Brown Sensor Sensor Blue Blue Incorrect Incorrect Precautions for Correct Use Installation Sensing Object Power Reset Time Metal Coating: The sensing distances of the Proximity Sensor vary with the metal coating on sensing objects. The Proximity Sensor is ready to operate within 100 ms after power is supplied. If power supplies are connected to the Proximity Sensor and load respectively, be sure to supply power to the Proximity Sensor before supplying power to the load. Power OFF The Proximity Sensor may output a pulse signal when it is turned OFF. Therefore, it is recommended to turn OFF the load before turning OFF the Proximity Sensor. Power Supply Transformer When using a DC power supply, make sure that the DC power supply has an insulated transformer. Do not use a DC power supply with an auto-transformer. E2E/E2E2 Cylindrical Proximity Sensor 35 Wiring Environment High-tension Lines Water Resistivity Wiring through Metal Conduit If there is a power or high-tension line near the cable of the Proximity Sensor, wire the cable through an independent metal conduit to prevent against Proximity Sensor damage or malfunctioning. Cable Tractive Force Do not pull on cables with tractive forces exceeding the following. Diameter Tractive force 4 dia. max. 30 N max. 4 dia. min. 50 N max. Mounting Do not use the Proximity Sensor underwater, outdoors, or in the rain. Operating Environment Be sure to use the Proximity Sensor within its operating ambient temperature range and do not use the Proximity Sensor outdoors so that its reliability and life expectancy can be maintained. Although the Proximity Sensor is water resistive, a cover to protect the Proximity Sensor from water or water soluble machining oil is recommended so that its reliability and life expectancy can be maintained. Do not use the Proximity Sensor in an environment with chemical gas (e.g., strong alkaline or acid gasses including nitric, chromic, and concentrated sulfuric acid gases). The Proximity Sensor must not be subjected to excessive shock with a hammer when it is installed, otherwise the Proximity Sensor may be damaged or lose its water-resistivity. Connecting Load to AC/DC 2-wire Sensor Refer to the following before using AC or DC 2-wire Proximity Sensors. Surge Protection P: The allowable power of the bleeder resistor. (The actual power capacity of the bleeder resistor must be at least a few times as large as the allowable power of the bleeder resistor.) I: Load current (mA) Although the Proximity Sensor has a surge absorption circuit, if there is any machine that has a large surge current (e.g., a motor or welding machine) near the Proximity Sensor, connect a surge absorber to the machine. Leakage Current When the Proximity Sensor is OFF, the Proximity Sensor has leakage current. Refer to page 17 and page 20 Leakage Current Characteristics. In this case, the load is imposed with a small voltage and the load may not be reset. Before using the Proximity Sensor, make sure that this voltage is less than the load reset voltage. The AC 2-wire Proximity Sensor cannot be connected to any card-lift-off relay (e.g., the G2A) because contact vibration of the relay will be caused by the leakage current and the life of the relay will be shortened. The following resistors are recommended. 100 VAC (supply voltage): A resistor with a resistance of 10 k maximum and an allowable power of 3 W minimum 200 VAC (supply voltage): A resistor with a resistance of 20 k maximum and an allowable power of 10 W minimum If these resistors generate excessive heat, use a resistor with a resistance of 10 k maximum and an allowable power of 5 W minimum at 100 VAC and a resistor with a resistance of 20 k maximum and an allowable power of 10 W minimum at 200 VAC instead. DC 2-wire Models Connect a bleeder resistor as the bypass for the leakage current so that the current flowing into the load will be less than the load reset current. Load Loads with Large Inrush Currents (E2E-X@T@) Connecting a load that has a large inrush current (e.g., a lamp or motor) may result in a malfunction due to the inrush current causing a load short-circuit. Countermeasures Against Leakage Current AC 2-wire Models Connect a bleeder resistor as the bypass for the leakage current so that the current flowing into the load will be less than the load reset current. As shown in the following diagram, connect the bleeder resistor so that the current flowing into the Proximity Sensor will be 10 mA minimum and the residual voltage imposed on the load will be less than the load reset voltage. Load Bleeder resistor R VAC power supply VS Refer to the following to calculate the bleeder resistance and the allowable power of the bleeder resistor. R VS/(10 - I) (k) P > VS2/R (mW) 36 E2E/E2E2 Cylindrical Proximity Sensor Bleeder resistor R Refer to the following to calculate the bleeder resistance and the allowable power of the bleeder resistor. R VS/(iR - iOFF) (k ) P > VS2/R (mW) P: The allowable power of the bleeder resistor. (The actual power capacity of the bleeder resistor must be at least a few times as large as the allowable power of the bleeder resistor.) iR: Leakage current of Sensors (mA) iOFF: Release current of load (mA) The following resistors are recommended. 12 VDC (supply voltage): A resistor with a resistance of 15 k maximum and an allowable power of 450 mW minimum 24 VDC (supply voltage): A resistor with a resistance of 30 k maximum and an allowable power of 0.1 W minimum Connection to a PLC Example Required Conditions In this example, the above conditions are checked for when the PLC model is the C200H-ID212, the Proximity Sensor model is the E2EX7D1-N, and the power supply voltage is 24 V. Connection to a PLC is possible if the specifications of the PLC and the Proximity Sensor satisfy the following conditions. (The meanings of the symbols are given below.) 1. VON (14.4 V) VCC (20.4 V) - VR (3 V) = 17.4 V: OK 2. IOFF (1.3 mA) Ileak (0.8 mA): OK 1. The ON voltage of the PLC and the residual voltage of the Proximity Sensor must satisfy the following. VON VCC - VR 3. ION = [VCC (20.4 V) - VR (3 V) - VPC (4 V)]/RIN (3 k) 4.5 mA Therefore, IOUT(min) (3 mA) ION (4.5 mA): OK 2. The OFF current of the PLC and the leakage current of the Proximity Sensor must satisfy the following. IOFF Ileak (If the OFF current is not listed in the specifications, take it to be 1.3 mA.) 3. The ON current of the PLC and the control output (IOUT) of the Proximity Sensor must satisfy the following. IOUT(min) ION IOUT(max) The ON current of the PLC will vary, however, with the power supply voltage and the input impedance used as shown in the following equation. ION = (VCC - VR - VPC )/RIN VON: ON voltage of PLC (14.4 V) ION: ON current of PLC (typ. 7 mA) IOFF: OFF current of PLC (1.3 mA) RIN: Input impedance of PLC (3 k) VPC: Internal residual voltage of PLC (4 V) VR: Output residual voltage of Proximity Sensor (3 V) Ileak: Leakage current of Proximity Sensor (0.8 mA) IOUT: Control output of Proximity Sensor (3 to 100 mA) VCC: Power supply voltage (PLC: 20.4 to 26.4 V) Values in parentheses are for the following PLC model and Proximity Sensor model. PLC: C200H-ID212 Proximity Sensor: E2E-X7D1-N Precautions for AC/DC 2-wire Proximity Sensors in Operation Connection Model DC 2-wire Connection type AND (serial connection) Method Description The Sensors connected together must satisfy the following conditions. Correct VS - N x VR Load operating voltage N: No. of Sensors VR: Residual voltage of each Sensor VS: Supply voltage Load If each Proximity Sensor is not supplied with the rated voltage and current, the indicator will not be lit properly or unnecessary pulses may be output for approximately 1 ms. OR (parallel connection) The Sensors connected together must satisfy the following conditions. Correct Load N x i Load reset current N: No. of Sensors i: Leakage current of each Sensor If the MY Relay, which operates at 24 VDC, is used as a load for example, a maximum of four Proximity Sensors can be connected to the load. AC 2-wire AND (serial connection) If 100 or 200 VAC is imposed on the Proximity Sensors, VL (i.e., the voltage imposed on the load) will be obtained from the following. Incorrect Load VL = VS - (residual voltage x No. of Proximity Sensors) (V) Therefore, if VL is lower than the load operating voltage, the load will not operate. Correct A maximum of three Proximity Sensors can be connected in series provided that the supply voltage is 100 V minimum. Load Load Vs x 100 V E2E/E2E2 Cylindrical Proximity Sensor 37 Model Connection type AC 2-wire OR (parallel connection) Method Description In principle, more than two Proximity Sensors cannot be connected in parallel. Incorrect A Load Provided that Proximity Sensor A does not operate with Proximity Sensor B simultaneously and there is no need to keep the load operating continuously, the Proximity Sensors can be connected in parallel. In this case, however, due to the total leakage current of the Proximity Sensors, the load may not reset properly. B Correct Load A B VAC power supply VS It is not possible to keep the load operating continuously with Proximity Sensors A and B in simultaneous operation to sense sensing objects due to the following reason. When Proximity Sensor A is ON, the voltage imposed on Proximity Sensor A will drop to approximately 10 V and the load current flows into Proximity Sensor A, and when one of the sensing objects is close to Proximity Sensor B, Proximity Sensor B will not operate because the voltage imposed on Proximity Sensor B is 10 V, which is too low. When Proximity Sensor A is OFF, the voltage imposed on Proximity Sensor B will reach the supply voltage and Proximity Sensor B will be ON. Then, Proximity Sensor A as well as Proximity Sensor B will be OFF for approximately 10 ms, which resets the load for an instant. To prevent the instantaneous resetting of the load, use a relay as shown on the left. DC 3-wire AND (serial connection) Correct Load The Sensors connected together must satisfy the following conditions. iL + (N -1) x i Upper-limit of control output of each Sensor VS - N x VR Load operating voltage N: No. of Sensors VR: Residual voltage of each Sensor VS: Supply voltage i: Current consumption of the Sensor iL: Load current If the MY Relay, which operates at 24 VDC, is used as a load for example, a maximum of two Proximity Sensors can be connected to the load. 38 E2E/E2E2 Cylindrical Proximity Sensor Dimensions Note: All units are in millimeters unless otherwise indicated. E2E Model DC 2-wire DC 3-wire Model No. Pre-wired Shielded Unshielded Connector Shielded (M12) Unshielded Connector (M8-3 pin) Shielded Connector Shielded (M8) 3 dia. Shielded Unshielded Pre-wired connector (no polarity) Shielded --- AC 2-wire Model No. Figure No. E2E-CR6@ 1 4 dia. E2E-CR8@@ 2 M5 E2E-X1@@ 4 5.4 dia. E2E-C1@@ 3 Model No. --- AC/DC 2-wire Figure No. --- Model No. Figure No. --- --- M8 E2E-X2D@-N 5 E2E-X1R5E@/F@ 5 E2E-X1R5Y@ 7 M12 E2E-X3D@-N 9 E2E-X2E@/F@ 9 E2E-X2Y@ 11 E2E-X3T1 12 M18 E2E-X7D@-N 14 E2E-X5E@/F@ 14 E2E-X5Y@ 12 E2E-X7T1 13 M30 E2E-X10D@-N 16 E2E-X10E@/F@ 16 E2E-X10Y@ 16 E2E-X10T1 15 M8 E2E-X4MD@ 6 E2E-X2ME@/F@ 6 E2E-X2MY@ 8 --- --- M12 E2E-X8MD@ 10 E2E-X5ME@/F@ 10 E2E-X5MY@ 12 M18 E2E-X14MD@ 15 E2E-X10ME@/F@ 15 E2E-X10MY@ 15 M30 E2E-X20MD@ 17 E2E-X18ME@/F@ 17 E2E-X18MY@ 17 M8 E2E-X2D@-M1(G) 18 E2E-X1R5E@-M1/ 18 F@-M1 --- --- --- --- M12 E2E-X3D@-M1(G) 20 E2E-X2E@-M1 /F@-M1 20 E2E-X2Y@-M1 22 M18 E2E-X7D@-M1(G) 24 E2E-X5E@-M1 /F@-M1 24 E2E-X5Y@-M1 24 M30 E2E-X10D@-M1(G) 26 E2E-X10E@-M1 /F@-M1 26 E2E-X10Y@-M1 26 M8 E2E-X4MD@-M1(G) 19 E2E-X2ME@-M1 /F@-M1 19 --- --- --- --- M12 E2E-X8MD@-M1(G) 21 E2E-X5ME@-M1 /F@-M1 21 E2E-X5MY@-M1 23 M18 E2E-X14MD@M1(G) 25 E2E-X10ME@-M1/ 25 F@-M1 E2E-X10MY@-M1 25 M30 E2E-X20MD@M1(G) 27 E2E-X18ME@-M1/ 27 F@-M1 E2E-X18MY@-M1 27 4 dia. --- --- E2E-CR8@@-M5 36 --- --- --- M5 --- --- E2E-X1@@-M5 37 --- --- --- M8 E2E-X2D@-M3G 28 E2E-X1R5E@-M3/ 28 F@-M3 --- --- --- --- E2E-X4MD@-M3G 29 E2E-X2ME@-M3 /F@-M3 29 M12 E2E-X3D1-M1GJ 30 --- --- --- --- --- --- M18 E2E-X7D1-M1GJ 32 M30 E2E-X10D1-M1GJ 34 M12 E2E-X8MD1-M1GJ 31 --- --- --- --- --- --- M18 E2E-X14MD1-M1GJ 33 M30 E2E-X20MD1-M1GJ 35 M12 E2E-X3D1-M1J-T 30 --- --- --- --- --- --- M18 E2E-X7D1-M1J-T 32 M30 E2E-X10D1-M1J-T 34 Unshielded Pre-wired connector --- Figure No. Note 1. Two clamping nuts and one toothed washer are provided with M8 to M30 Models. 2. The model numbers of Pre-wired M8 to M30 Models are laser-marked on the milled section and cable section. E2E/E2E2 Cylindrical Proximity Sensor 39 Pre-wired Models (Shielded) Fig. 3: E2E-C1@@ Fig. 1: E2E-CR6@@ 27 30.1 dia. 25 17.5 5.4 dia. 17 Operation indicator (red) Operation indicator (red) 2.4-dia. (7/0.127-dia.) vinyl-insulated round cable with 3 conductors, Standard length: 2 m 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm), Standard length: 2 m Robotics cable Models: 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.15 mm2, Insulator diameter: 1.05 mm), Standard length: 2 m The cable can be extended up to 100 m (separate metal conduit). Fig. 2: E2E-CR8@@ 25 17.5 4 dia. Fig. 4: E2E-X1@@ 25 17.5 9.7 dia. Operation indicator (red) 15 8 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm), Standard length: 2 m Robotics cable Models: 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.15 mm2, Insulator diameter: 1.05 mm), Standard length: 2 m The cable can be extended up to 100 m (separate metal conduit). Operation indicator (red) Two clamping nuts Toothed washer 4 M5 x 0.5 Pre-wired Models (Shielded) Pre-wired Models (Unshielded) Fig. 5: E2E-X2D@-N E2E-X1R5E@/F@ Fig. 6: E2E-X4MD@ E2E-X2ME@/F@ 30 7 30 15 dia. 15 dia. 3 13 8 7 26 26 13 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.14 mm2, Insulator diameter: 0.9 mm), Standard length: 2 m Robotics cable Models: 2.9-dia. vinyl-insulated round cable with 3 conductors (Conductor cross section: 0.15 mm2, Insulator diameter: 1.05 mm), Standard length: 2 m The cable can be extended up to 100 m (separate metal conduit). 6 8 3 6.1 dia. Indicator (See note.) Two clamping nuts M8 x 1 Toothed washer 4-dia. vinyl-insulated round cable with 2 conductors (D Models)/3 conductors (E, F Models)(Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m Robotics cable Models: 4-dia. vinyl-insulated round cable with 2 conductors (D Models)/3 conductors (E Models)(Conductor cross section: 0.3 mm2, Insulator diameter: 1.27 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Note: D Models: Operation indicator (red), setting indicator (green); E, F Models: Operation indicator (red) Fig. 7: E2E-X1R5Y@ 3 Fig. 8: E2E-X2MY@ 40 15 dia. 36 13 4-dia. vinyl-insulated round cable with 2 conductors (D Models)/3 conductors (E, F Models)(Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m Note: D Models: Operation indicator (red), Robotics cable models: 4-dia. setting indicator (green); vinyl-insulated round cable with E, F Models: Operation indicator (red) 2 conductors (D Models)/3 conductors (E Models)(Conductor cross section: 0.3 mm2, Insulator diameter: 1.27 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). 7 40 15 dia. Indicator (See note.) Two Toothed clamping nuts washer M8 x 1 13 8 7 36 6 8 3 6.1 dia. M8 x 1 Two clamping nuts Toothed washer Fig. 9: E2E-X3D@-N E2E-X2E@/F@ Pre-wired e-CON connector Model 38 9 33 21 dia. 4 10 M8 x 1 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). 1 2 17 Operation indicator (red) Two clamping nuts Toothed washer Operation Indicator (red) 15.6 3 4 5.9 Fig. 10: E2E-X8MD@ E2E-X5ME@/F@ 4-dia. vinyl-insulated round cable with 2 conductors (Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Pre-wired e-CON connector Model 1 2 38 15 Connector: Product code 37104-3163-000FL (Sumitomo 3M) 9 33 21 dia. 17 7 4 10 15.6 3 4 5.9 15 Connector: Product code 37104-3163-000FL (Sumitomo 3M) 9 dia. M12 x 1 Indicator (See note.) Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green); E, F Models: Operation indicator (red) 40 4-dia. vinyl-insulated round cable with 2 conductors (D Models)/3 conductors (D@S,E, F Models) (Conductor cross section: 0.3 mm2,Insulator diameter: 1.3 mm), Standard length: 2 m Robotics cable Models: 4-dia. vinyl-insulated round cable with 2 conductors (D Models)/3 conductors (E Models) (Conductor cross section: 0.3 mm2, Insulator diameter: 1.27 mm), Standard length: 2 m The cable can be extended (separate metal conduit) up to 200 m (control output) or up to 100 m (diagnostic output). E2E/E2E2 Cylindrical Proximity Sensor M12 x 1 Indicator 4-dia. vinyl-insulated round cable with (See note.) 2 conductors (D Models)/3 conductors Two (D@S, E, F Models) (Conductor cross section: clamping nuts 0.3 mm2, Insulator diameter: 1.3 mm), Toothed Standard length: 2 m washer Robotics cable models: 4-dia. Note: D Models: Operation indicator (red), setting indicator (green); E, F Models: Operation indicator (red) vinyl-insulated round cable with 2 conductors (D Models)/3 conductors (E Models) (Conductor cross section: 0.3 mm2, Insulator diameter: 1.27 mm), Standard length: 2 m The cable can be extended (separate metal conduit) up to 200 m (control output) or up to 100 m (diagnostic output). Pre-wired Models (Shielded) Pre-wired Models (Unshielded) Fig. 11: E2E-X2Y@ Fig. 12: E2E-X5MY@ 43 43 9 17 4 17 10 9 38 21 dia. 38 21 dia. 7 10 4 9 dia. Two clamping nuts Toothed washer 4-dia. vinyl-insulated round cable with 2 conductors (Conductors cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Two clamping nuts Toothed washer 4-dia. vinyl-insulated round cable with 2 conductors (Conductors cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Fig. 13: E2E-X3T1 60 Operation indicator (red) M12 x 1 Operation indicator (red) M12 x 1 9 55 21 dia. 17 4 10 M12 x 1 Two clamping nuts Toothed washer Indicator (See note.) 4-dia. vinyl-insulated round cable with 2 conductors (Conductors cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Note: Operation indicator (red), setting indicator (green) Fig. 14: E2E-X7D@-N/ E2E-X5E@/F@ E2E-X5Y@/E2E-X7T1 Pre-wired e-CON connector Model 1 2 43 15.6 43 24 Two clamping nuts Toothed washer Note: D, T Models: Operation indicator (red), setting indicator (green); E, F, Y Models: Operation indicator (red) Fig. 16: E2E-X10D@-N/ E2E-X10E@/F@ E2E-X10Y@/ E2E-X10T1 6-dia. vinyl-insulated round cable with 2 conductors (D, Y, T Models)/3 conductors (D@S, E, F Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm) Standard length: 2 m Robotics cable models: 6-dia. vinyl-insulated round cable with 2 conductors (D Models)/ 3 conductors (E Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.74 mm) Standard length: 2 m The cable can be extended (separate metal conduit) up to 200 m (control output) or up to 100 m (diagnostic output). Pre-wired e-CON connector Model 1 2 48 12 43 42 dia. 5 36 10 3 4 5.9 15.6 10 Toothed washer Note: D Models: Operation indicator (red), setting indicator (green); E, F, Y Models: Operation indicator (red) 6-dia. vinyl-insulated round cable with 2 conductors (D, Y, T Models)/3 conductors (D@S, E, F Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm) Standard length: 2 m Robotics cable Models: 6-dia. vinylinsulated round cable with 2 conductors (D Models)/3 conductors (E Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.74 mm) Standard length: 2 m The cable can be extended (separate metal conduit) up to 200 m (control output) or up to 100 m (diagnostic output). Fig. 17: E2E-X20MD@/ E2E-X18ME@/F@ E2E-X18MY@ Pre-wired e-CON connector Model 1 2 15 15.6 Connector: Product code 37104-2206-000FL (Sumitomo 3M) 48 12 43 42 dia. 13 36 15 3 4 Connector: Product code 37104-2206-000FL (Sumitomo 3M) Indicator (See note.) Two clamping nuts M18 x 1 5.9 1 2 12 4 10 14.8 dia. Indicator (See note.) M18 x 1 Pre-wired e-CON connector Model 38 29 dia. Connector: Product code 37104-2206-000FL (Sumitomo 3M) 10 4 24 Fig. 15: E2E-X14MD@/ E2E-X10ME@/F@ E2E-X10MY@ 15 3 4 12 38 29 dia. 5.9 5 10 5.9 3 15 4 15.6 Connector: Product code 37104-2206-000FL (Sumitomo 3M) 26.8 dia. 6-dia. vinyl-insulated round cable 6-dia. vinyl-insulated round M30 x 1.5 Indicator (See note.) cable with 2 conductors (D, Y, T Two clamping nuts Toothed washer Note: D, T Models: Operation indicator (red), setting indicator (green); E,F,Y Models: Operation indicator (red) Models)/3 conductors (D@S, E, F Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m Robotics cable Models: 6-dia. vinylinsulated round cable with 2 conductors (D Models)/3 conductors (E Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m The cable can be extended (separate metal conduit) up to 200 m (control output) or up to 100 m (diagnostic output). M30 x 1.5 Toothed washer Indicator with 2 conductors (D, Y, T Models)/3 (See note.) conductors (D@S, E, F Models) Two (Conductor cross section: 0.5 mm2, clamping nuts Insulator diameter: 1.9 mm), Note: D Models: Operation indicator (red), setting indicator (green); E, F, Y Models: Operation indicator (red) Standard length: 2 m Robotics cable Models: 6-dia. vinylinsulated round cable with 2 conductors (D Models)/ 3 conductors (E Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.74 mm), Standard length: 2 m The cable can be extended (separate metal conduit) up to 200 m (control output) or up to 100 m (diagnostic output). E2E/E2E2 Cylindrical Proximity Sensor 41 M12 Connector Models (Shielded) M12 Connector Models (Unshielded) Fig. 18: E2E-X2D@-M1(G) E2E-X1R5E@-M1/F@-M1 Fig. 19: E2E-X4MD@-M1(G) E2E-X2ME@-M1/F@-M1 43 43 30 15 dia. 26 M12 x 1 8 3 13 30 15 dia. 26 M12 x 1 8 3 6 13 6.1 dia. Indicator (See note.) Two clamping nuts Toothed washer M8 x 1 Indicator (See note.) Two clamping nuts Toothed washer M8 x 1 Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) E, F Model: Operation indicator (red) Fig. 20: E2E-X3D@-M1(G) E2E-X2E@-M1/F@-M1 Note: D Models: Operation indicator (red), setting indicator (green) E, F Model: Operation indicator (red) Fig. 21: E2E-X8MD@-M1(G) E2E-X5ME@-M1/F@-M1 48 48 4 17 33 21 dia. 33 21 dia. 10 7 17 M12 x 1 M12 x 1 10 4 9 dia. Indicator (See note.) Two clamping nuts Toothed washer M12 x 1 Note: D Models: Operation indicator (red), setting indicator (green) E, F Model: Operation indicator (red) Fig. 22: E2E-X2Y@-M1 Indicator (See note.) Two clamping nuts Toothed washer M12 x 1 Note: D Models: Operation indicator (red), setting indicator (green) E, F Model: Operation indicator (red) Fig. 23: E2E-X5MY@-M1 53 53 38 21 dia. 4 17 38 21 dia. 10 7 17 M12 x 1 M12 x 1 10 4 9 dia. M12 x 1 Operating indicator (red) Two clamping nuts Toothed washer Fig. 24: E2E-X7D@-M1(G)/E2E-X5E@-M1/F@-M1 E2E-X5Y@-M1 Operation indicator (red) Two clamping nuts Toothed washer M12 x 1 Fig. 25: E2E-X14MD@-M1(G)/E2E-X10ME@-M1/F@-M1 E2E-X10MY@-M1 53 53 38 29 dia. 4 24 38 29 dia. 10 10 24 10 4 M12 x 1 M12 x 1 14.8 dia. Indicator (See note.) M18 x 1 Indicator (See note.) M18 x 1 Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) E, F, Y Model: Operation indicator (red) Fig. 26: E2E-X10D@-M1(G)/E2E-X10E@-M1/F@-M1 E2E-X10Y@-M1 Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) E, F, Y Model: Operation indicator (red) Fig. 27: E2E-X20MD@-M1(G)/E2E-X18ME@-M1/F@-M1 E2E-X18MY@-M1 58 58 5 36 36 10 M12 x 1 Indicator (See note.) M30 x 1.5 Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) E, F, Y Model: Operation indicator (red) 42 43 42 dia. 43 42 dia. E2E/E2E2 Cylindrical Proximity Sensor 13 26.8 dia. M30 x 1.5 5 10 M12 x 1 Indicator (See note). Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) E, F, Y Model: Operation indicator (red) M8 (3 pin) Connector Models (Shielded) Fig. 36: E2E-CR8@@-M5 Fig. 37: E2E-X1@@-M5 35 10 dia. 35 25 4 dia. 25 20 19.0 8 M8, 3-pin connector 20 M8 x 1 M8, 3-pin connector M8 x 1 Two clamping nuts Two toothed washers Operating indicator Operating indicator M5 x 0.5 M8 Connector Models (Shielded) M8 Connector Models (Unshielded) Fig. 28: E2E-X2D@-M3G/E2E-X1R5E@-M3/F@-M3 Fig. 29: E2E-X4MD@-M3G/E2E-X2ME@-M3/F@-M3 39 31 39 31 15 dia. 15 dia. 26 8 3 13 26 6 13 M8 x 1 3 M8 x 1 8 6.1 dia. M8 x 1 Note: M8 x 1 Indicator (See note.) Two clamping nuts Toothed washer D Models: Operation indicator (red), setting indicator (green) E, F Model: Operation indicator (red) Note: Indicator (See note.) Two clamping nuts Toothed washer D Models: Operation indicator (red), setting indicator (green) E, F Model: Operation indicator (red) Pre-wired M12 Connector Models Fig. 30: E2E-X3D1-M1GJ E2E-X3D1-M1J-T 38 9 33 21 dia. 10 4 17 M12 x 1 Operation Indicator (red), setting indicator (green) M12 x 1 4-dia. vinyl-insulated round cable, Standard length: 0.3 m Two clamping nuts Toothed washer Fig. 31: E2E-X8MD1-M1GJ 38 9 33 21 dia. 10 4 7 17 M12 x 1 9 dia. Operation indicator (red), setting indicator (green) Two clamping nuts Toothed washer M12 x 1 4-dia. vinyl-insulated round cable, Standard length: 0.3 m Fig. 32: E2E-X7D1-M1GJ E2E-X7D1-M1J-T 43 12 38 29 dia. 4 24 10 M12 x 1 M18 x 1 Operation indicator (red), setting indicator (green) Two clamping nuts Toothed washer 6-dia. vinyl-insulated round cable, Standard length: 0.3 m E2E/E2E2 Cylindrical Proximity Sensor 43 Pre-wired M12 Connector Models Fig. 33: E2E-X14MD1-M1GJ 43 12 38 29 dia. 10 4 10 24 M12 x 1 14.8 dia. Operation indicator (red), setting indicator (green) Two clamping nuts Toothed washer M18 x 1 6-dia. vinyl-insulated round cable, Standard length: 0.3 m Fig. 34: E2E-X10D1-M1GJ E2E-X10D1-M1J-T 48 12 43 42 dia. 36 10 5 M12 x 1 Operation indicator (red), setting indicator (green) Two clamping nuts M30 x 1.5 6-dia. vinyl-insulated round cable, Standard length: 0.3 m Toothed washer Fig. 35: E2E-X20MD1-M1GJ 48 12 43 42 dia. 13 36 5 10 M12 x 1 26.8 dia. M30 x 1.5 Operation indicator (red), setting indicator (green) Two clamping nuts 6-dia. vinyl-insulated round cable, Standard length: 0.3 m Toothed washer Mounting Holes F Dimensions F (mm) 44 3 dia. 3.3 +0.3 /0 dia. 4 dia. 4.2 +0.5 /0 dia. M5 5.5 +0.5 /0 dia. 5.4 dia. 5.7 E2E/E2E2 Cylindrical Proximity Sensor +0.5 /0 dia. M8 +0.5 8.5 /0 dia. M12 12.5 +0.5 /0 dia. M18 18.5 +0.5 /0 dia. M30 30.5 +0.5 /0 dia. E2E2 Pre-wired Models E2E2-X3D@ E2E2-X2@@ E2E2-X8MD@ E2E2-X5M@@ 60 21 dia. 17 60 9 21 dia. 17 55 4 10 9 55 7 10 4 9 dia. M12 x 1 Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) B, C, Y Model: Operation indicator (red) Indicator (See note.) M12 x 1 4-dia. vinyl-insulated round cable with 2 conductors (D, Y Models)/3 conductors (B, C Models) (Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). Indicator (See note.) Two clamping nuts Toothed washer 4-dia. vinyl-insulated round cable with 2 conductors (D, Y Models)/3 conductors Note: D Models: Operation indicator (red), (B, C Models) (Conductor cross section: setting indicator (green) 2 B, C, Y Model: Operation indicator (red) 0.3 mm , Insulator diameter: 1.3 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2E2-X14MD@ E2E2-X7D@ E2E2-X5@@ E2E2-X10M@@ 65 29 dia. 24 65 12 29 dia. 24 60 4 10 12 60 10 4 10 14.8 dia. Indicator (See note.) Two clamping nuts 6-dia. vinyl-insulated round cable with Toothed washer 2 conductors (D, Y Models)/3 conductors (B, C Models) (Conductor cross section: Note: D Models: Operation indicator (red), 0.5 mm2, Insulator diameter: 1.9 mm), setting indicator (green) B, C, Y Model: Operation indicator (red) Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). M18 x 1 E2E2-X10D@@ E2E2-X10@@ 70 65 42 dia. 36 Indicator (See note.) Two clamping nuts M18 x 1 Toothed washer 6-dia. vinyl-insulated round cable with 2 conductors (D, Y Models)/3 conductors Note: D Models: Operation indicator (red), (B, C Models) (Conductor cross section: setting indicator (green) 0.5 mm2, Insulator diameter: 1.9 mm), B, C, Y Model: Operation indicator (red) Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). 12 5 10 Indicator (See note.) M30 x 1.5 Two clamping nuts Toothed washer Note: D Models: Operation indicator (red), setting indicator (green) B, C, Y Model: Operation indicator (red) E2E2-X20MD@ E2E2-X18M@@ 70 42 dia. 36 6-dia. vinyl-insulated round cable with 2 conductors (D, Y Models)/3 conductors (B, C Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). 12 65 13 5 10 26.8 dia. M30 x 1.5 Two clamping nuts Toothed washer Indicator (See note.) Note: D Models: Operation indicator (red), setting indicator (green) B, C, Y Model: Operation indicator (red) 6-dia. vinyl-insulated round cable with 2 conductors (D, Y Models)/3 conductors (B, C Models) (Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m The cable can be extended up to 200 m (separate metal conduit). E2E/E2E2 Cylindrical Proximity Sensor 45 Connector Models (Shielded) Connector Models (Unshielded) E2E2-X2C@-M1/B@-M1 E2E2-X5MC@-M1/B@-M1 70 70 21.dia 17 10 4 55 21 dia. 17 55 4 M12 x 1 7 M12 x 1 10 9 dia. Operation indicator (red) Two clamping nuts Toothed washer M12 x 1 E2E2-X2Y@-M4 Operation indicator (red) Two clamping nuts Toothed washer M12 x 1 E2E2-X5MY@-M4 70 70 21.dia 17 10 4 55 21 dia. 17 55 4 1/2-20unf 7 1/2-20unf 10 9 dia. Operation indicator (red) Two clamping nuts Toothed washer M12 x 1 E2E2-X5C@-M1/B@-M1 Operation indicator (red) Two clamping nuts Toothed washer M12 x 1 E2E2-X10MC@-M1/B@-M1 75 75 60 29 dia. 29 dia 4 24 60 10 24 10 4 10 M12 x 1 M12 x 1 14.8 dia. Operation indicator (red) M18 x 1 Operation indicator (red) M18 x 1 Two clamping nuts Two clamping nuts Toothed washer Toothed washer E2E2-X5Y@-M4 E2E2-X10MY@-M4 75 75 29 dia 60 29 dia. 4 24 60 10 24 10 4 10 1/2-20unf 1/2-20unf 14.8 dia. Operation indicator (red) M18 x 1 Two clamping nuts Toothed washer 46 E2E/E2E2 Cylindrical Proximity Sensor Operation indicator (red) M18 x 1 Two clamping nuts Toothed washer Connector Models (Shielded) Connector Models (Unshielded) E2E2-X10C@-M1/B@-M1 E2E2-X18MC@-M1/B@-M1 80 42 dia. 80 42 dia. 65 36 10 5 13 36 65 5 10 M12 x 1 M12 x 1 26.8 dia. Operation indicator (red) Operation indicator (red) M30 x 1.5 M30 x 1.5 Two clamping nuts Toothed washer Two clamping nuts Toothed washer E2E2-X10Y@-M4 E2E2-X18MY@-M4 80 42 dia. 80 65 36 5 42 dia. 10 13 36 1/2-20unf 65 5 10 1/2-20unf 26.8 dia. Operation indicator (red) Operation indicator (red) M30 x 1.5 M30 x 1.5 Two clamping nuts Toothed washer Two clamping nuts Toothed washer Mounting Holes F Dimensions F (mm) M12 12.5 + 0.5 dia. 0 M18 18.5 + 0.5 dia. 0 M30 30.5 + 00.5 dia. E2E/E2E2 Cylindrical Proximity Sensor 47 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the product. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased product. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. ERRORS AND OMISSIONS The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. COPYRIGHT AND COPY PERMISSION This catalog shall not be copied for sales or promotions without permission. This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety. Cat. No. D058-E1-04 OMRON Corporation 2007.7 In the interest of product improvement, specifications are subject to change without notice. Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.