ES1DFL - ES1JFL Taiwan Semiconductor 1A, 200V - 600V Surface Mount Super Fast Rectifier FEATURES KEY PARAMETERS Glass passivated junction chip PARAMETER VALUE UNIT Ideal for automated placement IF(AV) 1 A Low profile package VRRM 200 - 600 V IFSM 30 A TJ MAX 150 C Low power loss, high efficiency Compliant to RoHS Directive 2011/65/EU and in accordance to WEEE 2002/96/EC Package SOD-123FL Configuration Single dice Halogen-free according to IEC 61249-2-21 APPLICATIONS High frequency rectification Freewheeling application Switching mode converters and inverters in computer, automotive and telecommunication. MECHANICAL DATA Case: SOD-123FL Molding compound meets UL 94 V-0 flammability rating Moisture sensitivity level: level 1, per J-STD-020 Packing code with suffix "G" means green compound (halogen-free) Terminal: Matte tin plated leads, solderable per J-STD-002 SOD-123FL Meet JESD 201 class 1A whisker test Polarity: As marked Weight: 16 mg (approximately) ABSOLUTE MAXIMUM RATINGS (TA = 25C unless otherwise noted) SYMBOL ES1DFL PARAMETER Marking code on the device ES1GFL ES1JFL EDF EGF EJF UNIT Repetitive peak reverse voltage VRRM 200 400 600 V Reverse voltage, total rms value VRMS 140 280 420 V Maximum DC blocking voltage VDC 200 400 600 Forward current IF(AV) 1 A Surge peak forward current, 8.3 ms single half sinewave superimposed on rated load per diode IFSM 30 A Junction temperature TJ - 55 to +150 C Storage temperature TSTG - 55 to +150 C 1 Version:C1812 ES1DFL - ES1JFL Taiwan Semiconductor THERMAL PERFORMANCE PARAMETER SYMBOL TYP UNIT Junction to Lead Thermal Resistance RJL 35 C/W Junction to Ambient Thermal Resistance RJA 85 C/W ELECTRICAL SPECIFICATIONS (TA = 25C unless otherwise noted) PARAMETER CONDITIONS SYMBOL TYP MAX UNIT - 1.0 V - 1.3 V - 1.7 V - 5 A - 100 A CJ 8 - pF trr - 35 nS ES1DFL Forward voltage (1) ES1GFL IF = 1A, TJ = 25C VF ES1JFL Reverse current @ rated VR per diode Junction capacitance (2) TJ = 25C IR TJ = 125C 1 MHz, VR=4V IF=0.5A , IR=1.0A Reverse recovery time IRR=0.25A Notes: 1. Pulse test with PW=0.3 ms 2. Pulse test with PW=30 ms ORDERING INFORMATION PART NO. PACKING CODE ES1xFL RV (Note1) RQ PACKING CODE SUFFIX G PACKAGE PACKING SOD-123FL 3,000 / 7" Plastic reel SOD-123FL 10,000 / 13" Paper reel Notes: 1. "x" defines voltage from 200V (ES1DFL) to 600V (ES1JFL) 2. Whole series with green compound EXAMPLE EXAMPLE P/N PART NO. PACKING CODE ES1JFL RVG ES1JFL RV 2 PACKING CODE SUFFIX G DESCRIPTION Green compound Version:C1812 ES1DFL - ES1JFL Taiwan Semiconductor CHARACTERISTICS CURVES (TA = 25C unless otherwise noted) Fig1. Forward Current Derating Curve Fig2. Typical Junction Capacitance 20 18 1 16 CAPACITANCE (pF) AVERAGE FORWARD CURRENT (A) 1.2 0.8 0.6 0.4 0.2 14 12 10 8 6 4 Resistive or inductive load f=1.0MHz Vsig=50mVp-p 2 0 0 0 25 50 75 100 125 150 0.1 1 LEAD TEMPERATURE (C) 10 TJ=125C 1 TJ=25C 0.01 20 40 60 80 100 100 10 Pulse width=300s 1% duty cycle 10 TJ=125C TJ=25C 0.1 1 0.01 ES1JFL Pulse width 0.001 0.3 0.1 0 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) UF1DLW 1 (A) INSTANTANEOUS FORWARD CURRENT (A) INSTANTANEOUS REVERSE CURRENT (A) Fig4. Typical Forward Characteristics 100 0 100 REVERSE VOLTAGE (V) Fig3. Typical Reverse Characteristics 0.1 10 0.4 0.2 0.4 0.5 0.6 0.6 0.8 0.7 1 0.8 1.2 0.9 1.4 1 1.6 1.1 1.8 1.2 2 FORWARD VOLTAGE (V) 3 Version:C1812 ES1DFL - ES1JFL Taiwan Semiconductor CHARACTERISTICS CURVES (TA = 25C unless otherwise noted) PEAK FORWARD SURGE CURRENT (A) Fig5. Maximum Non-repetitive Forward Surge Current 30 8.3ms single half sine wave 25 20 15 10 5 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig6. Reverse Recovery Time Characteristic And Test Circuit Diagram 4 Version:C1812 ES1DFL - ES1JFL Taiwan Semiconductor PACKAGE OUTLINE DIMENSIONS SOD-123FL DIM. Unit (mm) Unit (inch) Min Max Min Max A 0.80 1.15 0.031 0.045 B 1.70 2.10 0.067 0.083 C 2.60 3.10 0.102 0.122 D 0.88 1.35 0.035 0.053 E 0.10 0.30 0.004 0.012 F 0.30 0.90 0.012 0.035 G 3.45 3.95 0.136 0.156 MARKING DIAGRAM P/N YW F 5 = Marking Code = Date Code = Factory Code Version:C1812 ES1DFL - ES1JFL Taiwan Semiconductor Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC's terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 6 Version:C1812