CURRENT 1.5 Amperes VOLTAGE 50 to 1000 Volts 1N5391 THRU 1N5399 Features * The plastic package carries Underwrites Laboratory Flammability Classification 94V-0 * Construction utilizes void-free molded plastic technique * High surge current capability * 1.5A operation at TL=70 with no thermal runaway * Low reverse leakage * High forward surge current capability * High temperature soldering guaranteed : 250/10 seconds, 0.375"(9.5mm) lead length, 5lbs.(2.3kg) tension DO-15 0.140(3.6) 0.104(2.6) DIA. 1.0(25.4) MIN. 0.300(7.6) 0.230(5.8) Mechanical Data * Case : JEDEC DO-15 molded plastic body * Terminals : Lead solderable per MIL-STD-750, method 2026 * Polarity : Color band denotes cathode end * Mounting Position : Any * Weight : 0.014 ounce, 0.33 gram 1.0(25.4) MIN. 0.034(0.9) 0.028(0.7) DIA. Dimensions in inches and (millimeters) Maximum Ratings And Electrical Characteristics (Ratings at 25 ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) Symbols 1N 1N 1N 1N 1N 1N 1N 1N 1N 5391 5392 5393 5394 5395 5396 5397 5398 5399 Units Maximum recurrent peak reverse voltage VRRM 50 100 200 300 400 500 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 210 280 350 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 300 400 500 600 800 1000 Volts Maximum average forward rectified current 0.375"(9.5mm) lead length TA=70 I(AV) 1.5 Amps Peak forward surge current 8.3ms half sine wave superimposed on rated load (JEDEC method) at TA=70 IFSM 50.0 Amps Maximum instantaneous forward voltage at 1.5A VF 1.4 Volts Maximum reverse current at rated DC blocking voltage TA=25 TA=100 IR 5.0 50.0 A RJA 50.0 RJL 25.0 Typical junction capacitance (Note 1) CJ 20.0 pF Maximum DC Blocking Voltage Temperature TA +150.0 TJ TSTG -65 to +175 Typical thermal resistance (Note 2) Operating and Storage temperature Range Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V DC. (2) Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length, P.C.B. mounted /W RATINGS AND CHARACTERISTIC CURVES 1N5391 THRU 1N5399 FIG.1-FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.2 20 INSTANTANEOUS FORWARD CURRENT(AMPERES) AVERAGE FORWARD CURRENT AMPERES 1.5 0.9 0.6 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm) lead length 0.3 0 0 25 50 75 100 125 150 175 LEAD TEMPERATURE ( ) 10 1 TJ=25 PULSE WIDTH=300S 0.1 1% DUTY CYCLE 0.01 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 0.6 1.0 1.2 1.4 1.5 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 50 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 10 10 0 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS REVERSE CURRENT (A ) PEAK FORWARD SURGE CURRENT (AMPERES) 0.8 1.0 0.1 TJ=25 JUNCTION CAPACITANCE(pF) 100 0.01 0 20 40 60 80 100 TJ=25 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) 10 1 0.1 1 10 REVERSE VOLTAGE. VOLTS 100 120 140