DZ23C2V4 SERIES DUAL SURFACE MOUNT ZENER DIODES 2.4 to 51 Volts POWER 300 mWatts FEATURES * Dual Zeners in Common Cathode Configuration 0.120(3.04) 0.110(2.80) * 300mW Power Dissipation Rating * Zener Voltages from 2.4~51V 0.006(0.15)MIN. VOLTAGE * Ideally Suited for Automatic Insertion * Common Anode Style Available See AZ Series 0.056(1.40) 0.047(1.20) * In compliance with EU RoHS 2002/95/EC directives 0.079(2.00) 0.008(0.20) 0.070(1.80) 0.003(0.08) MECHANICAL DATA * Case: SOT-23, Molded Plastic 0.044(1.10) 0.004(0.10)MAX. 0.035(0.90) * Terminals: Solderable per MIL-STD-750, Method 2026 0.020(0.50) * Polarity:See Diagram 0.013(0.35) * Approx. Weight: 0.0003 ounces, 0.008 grams * Mounting Position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS PARAMETER Power Dissipation (Note 1) Thermal Resistance, Junction to Ambient Air (Note 1) Operating Junction Temperature and Storage Temperature Range SYMBOL VALUE UNITS PD 300 mW RJA 420 TJ ,TSTG -65 to +150 O C/W O C NOTES: 1. Mounted on 5.0mm 2 (.013mm thick) land areas. 2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum. October 03,2011-REV.01 PAGE . 1 DZ23C2V4 SERIES Nominal Zener Voltage Part Number Z ZT @ I ZT V Z @ IZT Max Reverse Leakage Current Max. Zener Impedance Z ZK @ I ZK IR @ V R Marking Code No m. V Mi n. V Ma x. V mA mA A V DZ23C2V4 2.4 2.28 2.52 85 5.0 600 1.00 100.0 1.0 V0 DZ23C2V7 2.7 2.57 2.84 83 5.0 600 1.00 75 1.0 V1 DZ23C3V0 3.0 2.85 3.15 95 5.0 600 1.00 50 1.0 V2 DZ23C3V3 3.3 3.14 3.47 95 5.0 600 1.00 25 1.0 V3 DZ23C3V6 3.6 3.42 3.78 90 5.0 600 1.00 5.0 1.0 V4 DZ23C3V9 3.9 3.71 4.10 90 5.0 600 1.00 3.0 1.0 V5 DZ23C4V3 4.3 4.09 4.52 95 5.0 600 1.00 5.0 1.0 V6 DZ23C4V7 4.7 4.47 4.94 78 5.0 500 1.00 5.0 2.0 V7 DZ23C5V1 5.1 4.85 5.36 60 5.0 480 1.00 0.1 0.8 V8 DZ23C5V6 5.6 5.32 5.88 40 5.0 400 1.00 0.1 1.0 V9 DZ23C6V2 6.2 5.89 6.51 10 5.0 150 1.00 0.1 2.0 V10 DZ23C6V8 6.8 6.46 7.14 8 5.0 80 1.00 0.1 3.0 V11 DZ23C7V5 7.5 7.13 7.88 7 5.0 80 1.00 0.1 5.0 V12 DZ23C8V2 8.2 7.79 8.61 7 5.0 80 1.00 0.1 6.0 V13 DZ23C8V7 8.7 8.27 9.14 7 5.0 80 1.00 0.1 6.5 V87 DZ23C9V1 9.1 8.65 9.56 10 5.0 100 1.00 0.1 7.0 V14 DZ23C10 10 9.50 10.50 15 5.0 150 1.00 0.1 7.5 V15 DZ23C11 11 10.45 11.55 20 5.0 150 1.00 0.1 8.5 V16 DZ23C12 12 11.40 12.60 20 5.0 150 1.00 0.1 9.0 V17 DZ23C13 13 12.35 13.65 25 5.0 170 1.00 0.1 10.0 V18 DZ23C14 14 13.30 14.70 25 5.0 170 1.00 0.1 10.5 VA DZ23C15 15 14.25 15.75 30 5.0 200 1.00 0.1 11.0 V19 DZ23C16 16 15.20 16.80 40 5.0 200 1.00 0.1 12.0 V20 DZ23C17 17 16.15 17.85 40 5.0 200 1.00 0.1 13.0 VB DZ23C18 18 17.10 18.90 50 5.0 225 1.00 0.1 14.0 V21 DZ23C20 20 19.00 21.00 50 5.0 225 1.00 0.1 15.0 V22 DZ23C22 22 20.90 23.10 55 5.0 250 1.00 0.1 17.0 V23 DZ23C24 24 22.80 25.20 80 5.0 250 1.00 0.1 18.0 V24 DZ23C27 27 25.65 28.35 80 5.0 300 1.00 0.1 20.0 V25 DZ23C28 28 26.60 29.40 80 5.0 300 1.00 0.1 22.0 VC DZ23C30 30 28.50 31.50 80 5.0 300 1.00 0.1 22.5 V26 DZ23C33 33 31.35 34.65 80 5.0 325 1.00 0.1 25.0 V27 DZ23C36 36 34.20 37.80 90 5.0 350 1.00 0.1 27.0 V28 DZ23C39 39 37.05 40.95 90 5.0 350 1.00 0.1 29.0 V29 DZ23C43 43 40.85 45.15 100 5.0 375 1.00 0.1 32.0 V30 DZ23C47 47 44.65 49.35 100 5.0 375 1.00 0.1 35.0 V31 DZ23C51 51 48.45 53.55 100 5.0 400 1.00 0.1 38.0 V32 October 03,2011-REV.01 PAGE . 2 DZ23C2V4 SERIES 2FWREHU,2011-REV.01 PAGE . 3 DZ23C2V4 SERIES MOUNTING PAD LAYOUT SOT-23 0.035 MIN. (0.90) MIN. Unitinch(mm) 0.078 (2.00) 0.037 (0.95) 0.043 (1.10) 0.031 MIN. (0.80) MIN. 0.043 (1.10) 0.106 (2.70) ORDER INFORMATION * Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7" plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2011 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 2FWREHU,2011-REV.01 PAGE . 4