Rev.1.00 Mar 10, 2006 page 1 of 23
HA1630S01/02/03 Series
Ultra-Small Low Voltage Operation CMOS Single Operational
Amplifier REJ03D0798-0100
Rev.1.00
Mar 10, 2006
Description
The HA1630S01/02/03 are single CMOS Operational Amplifiers realizing low voltage operation, low input offset
voltage and low supply current. In addition to a low operating voltage from 1.8V, these device output can achieve full
swing output voltage capabilit y extending to either supply. Available in an ultra-small CMPAK-5 package that
occupies only 1/8 the area of the SOP-8 package.
Features
• Low power and single supply operation VDD = 1.8 to 5.5 V
• Low input offset voltage VIO = 4.0 mV Max
• Low supply current IDD = 15 µA Typ (HA1630S01)
I
DD = 50 µA Typ (HA1630S02)
I
DD = 100 µA Typ (HA1630S03)
• Maximum output voltage VOH = 2.9 V Min (at VDD = 3.0 V)
• Low input bias current IIB = 1 pA Typ
Ordering Information
Type No. Package Name Package Code
HA1630S01CM CMPAK-5 PTSP0005ZC-A
HA1630S01LP MPAK-5 PLSP0005ZB-A
HA1630S02CM CMPAK-5 PTSP0005ZC-A
HA1630S02LP MPAK-5 PLSP0005ZB-A
HA1630S03CM CMPAK-5 PTSP0005ZC-A
HA1630S03LP MPAK-5 PLSP0005ZB-A
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 2 of 23
Pin Arrangement
VDD VOUT
VIN(+) VIN(–)
5 4
1
VSS
32
−+
Equivalent Circuit
V
DD
V
SS
V
IN(+)
V
IN(–)
V
OUT
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 3 of 23
Absolute Maximum Ratings
(Ta = 25°C)
Items Symbol Ratings Unit Note
Supply voltage VDD 7 V
Differential input voltage VIN(diff) –VDD to +VDD V
Input voltage VIN –0.3 to +VDD V 1
Power dissipation PT 200 mW
Operating temp. Range Topr –40 to +85 °C
Storage temp. Range Tstg –55 to +125 °C
Note: 1. Do not apply Input Voltage exceeding VDD or 7 V.
Electrical Characteristics
(VDD = 3.0 V, Ta = 25°C)
Items Symbol Min Typ Max Unit Test Condition
Input offset voltage VIO — — 4.0 mV Vin = 1.5 V
Input offset current IIO — (1.0) — pA Vin = 1.5 V
Input bias current IIB — (1.0) — pA Vin = 1.5 V
Output high voltage VOH 2.9 — — V RL = 1 MΩ
6 12 — VOH = 2.5 V (HA1630S01)
25 50 — VOH = 2.5 V (HA1630S02)
Output source current IO SOURCE
50 100 —
µA
VOH = 2.5 V (HA1630S03)
Output low voltage VOL — — 0.1 V RL = 1 MΩ
— (0.8) — VOL = 0.5 V (HA1630S01)
— (1.0) — VOL = 0.5 V (HA1630S02)
Output sink current IO SINK
— (1.2) —
mA
VOL = 0.5 V (HA1630S03)
Common mode input voltage
range VCM –0.1 to 2.1 — — V
— (0.125) — CL = 20 pF (HA1630S01)
— (0.50) — CL = 20 pF (HA1630S02)
Slew rate SR
— (1.00) —
V/µs
CL = 20 pF (HA1630S03)
Voltage gain AV 60 100 — dB
— (200) — CL = 20 pF (HA1630S01)
— (680) — CL = 20 pF (HA1630S02)
Gain bandwidth product BW
— (1200) —
kHz
CL = 20 pF (HA1630S03)
Power supply rejection ratio PSRR 60 80 — dB
Common mode rejection ratio CMRR 60 80 — dB
— 15 30 RL = ∞ (HA1630S01)
— 50 100 RL = ∞ (HA1630S02)
Supply current IDD
— 100 200
µA
RL = ∞ (HA1630S03)
Note: 1. ( ) : Design specification
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 4 of 23
Table of Graphs
Electrical Characteristics HA1630S01
Figure HA1630S02
Figure HA1630S03
Figure Test
Circuit
vs Supply voltage 1-1 2-1 3-1 Supply current IDD vs Ambient temperature 1-2 2-2 3-2 2
vs Output source curre nt 1-3 2-3 3-3 Output high voltage VOH vs Supply voltage 1-4 2-4 3-4 4
Output source current IO SOURCE vs Ambient temperature 1-5 2-5 3-5 6
Output low voltage VOL vs Output sink current 1-6 2-6 3-6 5
Output sink current IO SINK vs Ambient temperature 1-7 2-7 3-7 6
Distribution 1-8 2-8 3-8
vs Supply voltage 1-9 2-9 3-9
Input offset voltage VIO
vs Ambient temperature 1-10 2-10 3-10
1
Common mode input
voltage range VCM vs Ambient temperature 1-11 2-11 3-11 7
Power supply rejection
ratio PSRR vs Frequency 1-12 2-12 3-12 1
Common mode rejection
ratio CMRR vs Frequency 1-13 2-13 3-13 7
Voltage gain & phase
angle AV vs Frequency 1-14 2-14 3-14 10
vs Ambient temperature 1-15 2-15 3-15 Input bias current IIB vs Input voltage 1-16 2-16 3-16 3
Slew Rate (rising) SRr vs Ambient temperature 1-17 2-17 3-17
Slew Rate (falling) SRf vs Ambient temperature 1-18 2-18 3-18
Large signal transi ent
response 1-19 2-19 3-19 Slew rate
Small signal transient
response 1-20 2-20 3-20
9
(0 dB) vs. Output voltage p-p — 2-21 3-21 Total harmonic distortion +
noise (40 dB) vs. Output voltage p-p — 2-22 3-22
Maximum p-p output
voltage vs Frequency 1-21 2-23 3-23
8
Voltage noise density vs Frequency 1-22 2-24 3-24
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 5 of 23
Main Characteristics (HA1630S01)
V
DD
= 3.0 V
Figure 1-1. HA1630S01
Supply Current vs. Supply Voltage
0
5
10
15
20
25
0123456
Supply Voltage V
DD
(V)
Supply Current I
DD
(µA)
Figure 1-3. HA1630S01
Output High Voltage vs. Output Source Current
0
1
2
3
4
5
6
0 5 10 15
Output Source Current I
OSOURCE
(µA)
Output High Voltage V
OH
(V)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Ta = 25°C
Ta = 25°C
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 1-5. HA1630S01
Output Source Current vs. Ambient Temperature
0
10
20
30
40
50
−40 −200 20406080100
Ambient Temperature Ta (°C)
Output Source Current
I
OSOURCE
(µA)
Figure 1-2. HA1630S01
Supply Current vs. Ambient Temperature
0
5
10
15
20
25
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Supply Current I
DD
(µA)
V
DD
= 5.0 V
V
DD
= 1.8 V
R
L
= 1 M
Ω
R
L
= 510 k
Ω
Ta = 25°C
Figure 1-4. HA1630S01
Output High Voltage vs. Supply Voltage
1
2
3
4
5
6
123456
Supply Voltage V
DD
(V)
Output High Voltage V
OH
(V)
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 6 of 23
Figure 1-6. HA1630S01
Output Low Voltage vs. Output Sink Current
0
0.5
1.0
1.5
2.0
0 0.4 0.6 0.80.2 1.0
Output Sink Current IOSINK (mA)
Output Low Voltage VOL (V)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 1-8. HA1630S01
Input Offset Voltage Distribution
0
10
20
30
40
−4−3−2−10 1 2 3 4
Input Offset Voltage VIO (mV)
Percentage (%)
Ta = 25°C
V
DD
= 3.0 V
Figure 1-10. HA1630S01
Input Offset Voltage vs. Ambient Temperature
−4
−3
−2
−1
0
1
2
3
4
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Input Offset Voltage VIO (mV)
V
DD
= 5.0 V, V
IN
= 2.5 V
V
DD
= 1.8 V, V
IN
= 0.9 V
V
DD
= 3.0 V, V
IN
= 1.5 V
Figure 1-7. HA1630S01
Output Sink Current vs. Ambient Temperature
0
0.5
1.0
1.5
2.0
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Output Sink Current
IOSINK (mA)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 1-9. HA1630S01
Input Offset Voltage vs. Supply Voltage
−4
−3
−2
−1
0
1
2
3
4
123456
Supply Voltage VDD (V)
Input Offset Voltage VIO (mV)
Ta = 25°C
V
IN
= 0.5 V
Figure 1-11. HA1630S01
Common Mode Input Voltage vs.
Ambient Temperature
−1.0
0
1.0
2.0
3.0
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Common Mode
Input Voltage VCM (V)
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 7 of 23
Figure 1-14. HA1630S01
Open Loop Voltage Gain and Phase Angle vs. Frequency
−40
−20
0
20
40
60
80
100
Frequency f (Hz)
Open Loop Voltage Gain
A
VOL
(dB)
−90
−45
0
45
90
135
180
225
Phase Angle (deg)
Open Loop Voltage Gain
Phase Angle
Phase Margin: 50 deg
Figure 1-13. HA1630S01
Common Mode Rejection Ratio vs. Frequency
0
20
40
60
80
100
120
Frequency f (Hz)
Common Mode Rejection Ratio
CMRR (dB)
Figure 1-12. HA1630S01
Power Supply Rejection Ratio vs. Frequency
0
20
40
60
80
100
120
10 100 1k 10k 100k 1M
10 100 1k 10k 100k 1M
10 100 1k 10k 100k 1M
Frequency f (Hz)
Power Supply Rejection Ratio
PSRR (dB)
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 8 of 23
Figure 1-15. HA1630S01
Input Bias Current vs. Ambient Temperature
−200
−100
0
100
200
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Input Bias Current I
IB
(pA)
Figure 1-16. HA1630S01
Input Bias Current vs. Input Voltage
−200
−100
0
100
200
0 0.5 1.0 1.5 2.0 2.5 3.0
Input Voltage V
IN
(V)
Input Bias Current I
IB
(pA)
Figure 1-20. HA1630S01
Small Signal Transient Response
Figure 1-19. HA1630S01
Large Signal Transient Response
Figure 1-17. HA1630S01
Slew Rate (rising) vs. Ambient Temperature
0.05
0.10
0.15
0.20
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Slew Rate SRr (V/µs)
Figure 1-18. HA1630S01
Slew Rate (falling) vs. Ambient Temperature
0.05
0.10
0.15
0.20
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Slew Rate SRf (V/µs)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Ta = 25°C
V
DD
= 3.0 V
V
DD
= 3.0 V
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 9 of 23
Figure 1-21. HA1630S01
Voltage Output p-p vs. Frequency
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
100 1k 10k 100k 1M
Frequency f (Hz)
Output Voltage Vout p-p (V)
Figure 1-22. HA1630S01
Voltage Noise Density vs. Frequency
Voltage Noise Density (nV/√Hz)
100
200
0
Frequency f (Hz)
100 10k
Gain = 40 dB, V
p-p
= 0.03 V
Gain = 20 dB, V
p-p
= 0.3 V
Gain = 0 dB, V
p-p
= 2.5 V
Ta = 25°C
V
DD
= 3.0 V
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 10 of 23
Main Characteristics (HA1630S02)
Figure 2-1. HA1630S02
Supply Current vs. Supply Voltage
0
20
40
60
80
100
123456
Supply Voltage V
DD
(V)
Supply Current I
DD
(µA)
Figure 2-3. HA1630S02
Output High Voltage vs. Output Source Current
0
1
2
3
4
5
02010 4030 50 60
Output Source Current I
OSOURCE
(µA)
Output High Voltage V
OH
(V)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Ta = 25°C
Ta = 25°C
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 2-5. HA1630S02
Output Source Current vs. Ambient Temperature
0
20
40
60
80
100
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Output Source Current
I
OSOURCE
(µA)
Figure 2-2. HA1630S02
Supply Current vs. Ambient Temperature
0
20
40
60
80
100
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Supply Current I
DD
(µA)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
R
L
= 1 M
Ω
R
L
= 120 k
Ω
Ta = 25°C
V
DD
= 3.0 V
Figure 2-4. HA1630S02
Output High Voltage vs. Supply Voltage
1
2
3
4
5
6
123456
Supply Voltage V
DD
(V)
Output High Voltage V
OH
(V)
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 11 of 23
Figure 2-6. HA1630S02
Output Low Voltage vs. Output Sink Current
0
0.5
1.0
1.5
0 0.5 1.51.0
Output Sink Current IOSINK (mA)
Output Low Voltage VOL (V)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 2-8. HA1630S02
Input Offset Voltage Distribution
0
10
20
30
40
−4−3−2−10 1 2 3 4
Input Offset Voltage VIO (mV)
Percentage (%)
Figure 2-10. HA1630S02
Input Offset Voltage vs. Ambient Temperature
−4
−3
−2
−1
0
1
2
3
4
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Input Offset Voltage VIO (mV)
V
DD
= 5.0 V, V
IN
= 2.5 V
V
DD
= 1.8 V, V
IN
= 0.9 V
V
DD
= 3.0 V, V
IN
= 1.5 V
Figure 2-7. HA1630S02
Output Sink Current vs. Ambient Temperature
0
0.5
1.0
1.5
2.5
2.0
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Output Sink Current
IOSINK (mA)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 2-9. HA1630S02
Input Offset Voltage vs. Supply Voltage
−4
−3
−2
−1
0
1
2
3
4
12 34 56
Supply Voltage VDD (V)
Input Offset Voltage VIO (mV)
Ta = 25°C
V
IN
= 0.5 V
Figure 2-11. HA1630S02
Common Mode Input Voltage vs.
Ambient Temperature
−1.0
0
1.0
2.0
3.0
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Common Mode
Input Voltage VCM (V)
Ta = 25°C
V
DD
= 3.0 V
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 12 of 23
Figure 2-14. HA1630S02
Open Loop Voltage Gain and Phase Angle vs. Frequency
−40
−20
0
20
40
60
80
100
Frequency f (Hz)
Open Loop Voltage Gain
A
VOL
(dB)
−90
−45
0
45
90
135
180
225
Phase Angle (deg)
Figure 2-13. HA1630S02
Common Mode Rejection Ratio vs. Frequency
0
20
40
60
80
100
120
Frequency f (Hz)
Common Mode Rejection Ratio
CMRR (dB)
Figure 2-12. HA1630S02
Power Supply Rejection Ratio vs. Frequency
0
20
40
60
80
100
120
10 100 1k 10k 100k 1M
10 100 1k 10k 100k 1M
10 100 1k 10k 100k 1M 10M
Frequency f (Hz)
Power Supply Rejection Ratio
PSRR (dB)
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Open Loop Voltage Gain
Phase Angle
Phase Margin: 50 deg
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 13 of 23
Figure 2-15. HA1630S02
Input Bias Current vs. Ambient Temperature
−200
−100
0
100
200
0 25 50 75 100
Ambient Temperature Ta (°C)
Input Bias Current IIB (pA)
Figure 2-16. HA1630S02
Input Bias Current vs. Input Voltage
−200
−100
0
100
200
0 0.5 1.0 1.5 2.0 2.5 3.0
Input Voltage VIN (V)
Input Bias Current IIB (pA)
Figure 2-20. HA1630S02
Small Signal Transient Response
Figure 2-19. HA1630S02
Large Signal Transient Response
Figure 2-17. HA1630S02
Slew Rate (rising) vs. Ambient Temperature
0.3
0.5
0.4
0.6
0.7
0.8
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Slew Rate SRr (V/µs)
Figure 2-18. HA1630S02
Slew Rate (falling) vs. Ambient Temperature
0.3
0.5
0.4
0.6
0.7
0.8
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Slew Rate SRf (V/µs)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Ta = 25°C
V
DD
= 3.0 V
V
DD
= 3.0 V
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 14 of 23
Figure 2-21. HA1630S02
Total Harmonic Distortion + Noise vs.
Output Voltage p-p
0.001
0.01
0.1
1
10
0 0.5 1.0 1.5 2.0 2.5 3.0
Output Voltage Vout p-p (V)
T.H.D. + Noise (%)
V
DD
= 3.0 V
Ta = 25°C
Gain = 0 dB
f = 10 kHz
f = 100 Hz
f = 1 kHz V
DD
= 3.0 V
Ta = 25°C
Gain = 40 dB
f = 10 kHz
f = 100 Hz
f = 1 kHz
Figure 2-22. HA1630S02
Total Harmonic Distortion + Noise vs.
Output Voltage p-p
0.001
0.01
0.1
1
10
0 0.5 1.0 1.5 2.0 2.5 3.0
Output Voltage Vout p-p (V)
T.H.D. + Noise (%)
Figure 2-23. HA1630S02
Voltage Output p-p vs. Frequency
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
100 1k 10k 100k 1M
Frequency f (Hz)
Voltage Output Vout p-p (V)
Gain = 40 dB, Vp-p = 0.03 V
Gain = 20 dB, Vp-p = 0.3 V
Gain = 0 dB, Vp-p = 2.5 V
Ta = 25°C
V
DD
= 3.0 V
Figure 2-24. HA1630S02
Voltage Noise Density vs. Frequency
Voltage Noise Density (nV/√Hz)
100
200
0
Frequency f (Hz)
100 10k
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 15 of 23
Main Characteristics (HA1630S03)
Figure 3-1. HA1630S03
Supply Current vs. Supply Voltage
0
50
100
150
200
123456
Supply Voltage V
DD
(V)
Supply Current I
DD
(µA)
Figure 3-3. HA1630S03
Output High Voltage vs. Output Source Current
0
1
2
3
4
5
6
0 50 100 150
Output Source Current I
OSOURCE
(µA)
Output High Voltage V
OH
(V)
V
DD
= 5.5 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Ta = 25°C
Ta = 25°C
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 3-5. HA1630S03
Output Source Current vs. Ambient Temperature
0
50
100
150
200
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Output Source Current
I
OSOURCE
(µA)
Figure 3-2. HA1630S03
Supply Current vs. Ambient Temperature
0
50
100
150
200
−40 −15 10 35 60 85 110
Ambient Temperature Ta (°C)
Supply Current I
DD
(µA)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
R
L
= 1 M
Ω
R
L
= 51 k
Ω
Ta = 25°C
Figure 3-4. HA1630S03
Output High Voltage vs. Supply Voltage
1
2
3
4
5
6
123456
Supply Voltage V
DD
(V)
Output High Voltage V
OH
(V)
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 16 of 23
Figure 3-6. HA1630S03
Output Low Voltage vs. Output Sink Current
0
0.5
1.0
1.5
0 0.5 1.0 1.5
Output Sink Current IOSINK (mA)
Output Low Voltage VOL (V)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 3-8. HA1630S03
Input Offset Voltage Distribution
0
10
20
30
40
−4−3−2−10 1 2 3 4
Input Offset Voltage VIO (mV)
Percentage (%)
Figure 3-10. HA1630S03
Input Offset Voltage vs. Ambient Temperature
−4
−3
−2
−1
0
1
2
3
4
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Input Offset Voltage VIO (mV)
V
DD
= 5.0 V, V
IN
= 2.5 V
V
DD
= 1.8 V, V
IN
= 0.9 V
V
DD
= 3.0 V, V
IN
= 1.5 V
Figure 3-7. HA1630S03
Output Sink Current vs. Ambient Temperature
0
0.5
1.0
1.5
2.5
2.0
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Output Sink Current
IOSINK (mA)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Figure 3-9. HA1630S03
Input Offset Voltage vs. Supply Voltage
−4
−3
−2
−1
0
1
2
3
4
123456
Supply Voltage VDD (V)
Input Offset Voltage VIO (mV)
Ta = 25°C
V
IN
= 0.5 V
Figure 3-11. HA1630S03
Common Mode Input Voltage vs.
Ambient Temperature
−1.0
0
1.0
2.0
3.0
−40 −20 0 20 40 60 80 100
Ambient Temperature Ta (°C)
Common Mode
Input Voltage VCM (V)
Ta = 25°C
V
DD
= 3.0 V
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 17 of 23
Figure 3-14. HA1630S03
Open Loop Voltage Gain and Phase Angle vs. Frequency
−40
−20
0
20
40
60
80
100
Frequency f (Hz)
Open Loop Voltage Gain
A
VOL
(dB)
−90
−45
0
45
90
135
180
225
Phase Angle (deg)
Figure 3-13. HA1630S03
Common Mode Rejection Ratio vs. Frequency
0
20
40
60
80
100
120
Frequency f (Hz)
Common Mode Rejection Ratio
CMRR (dB)
Figure 3-12. HA1630S03
Power Supply Rejection Ratio vs. Frequency
0
20
40
60
80
100
120
10 100 1k 10k 100k 1M
10 100 1k 10k 100k 1M
10 100 1k 10k 100k 1M 10M
Frequency f (Hz)
Power Supply Rejection Ratio
PSRR (dB)
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Open Loop Voltage Gain
Phase Angle
Phase Margin: 50 deg
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 18 of 23
Figure 3-15. HA1630S03
Input Bias Current vs. Ambient Temperature
−200
−100
0
100
200
0 25 50 75 100
Ambient Temperature Ta (°C)
Input Bias Current I
IB
(pA)
Figure 3-16. HA1630S03
Input Bias Current vs. Input Voltage
−200
−100
0
100
200
0 0.5 1.0 1.5 2.0 2.5 3.0
Input Voltage V
IN
(V)
Input Bias Current I
IB
(pA)
Figure 3-20. HA1630S03
Small Signal Transient Response
Figure 3-19. HA1630S03
Large Signal Transient Response
Figure 3-17. HA1630S03
Slew Rate (rising) vs. Ambient Temperature
0
0.6
0.3
0.9
1.2
1.5
−50 −25 0 25 50 75 100
Ambient Temperature Ta (°C)
Slew Rate SRr (V/µs)
Figure 3-18. HA1630S03
Slew Rate (falling) vs. Ambient Temperature
0
0.6
0.3
0.9
1.2
1.5
−50 −25 0 25 50 75 100
Ambient Temperature Ta (°C)
Slew Rate SRf (V/µs)
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
V
DD
= 5.0 V
V
DD
= 3.0 V
V
DD
= 1.8 V
Ta = 25°C
V
DD
= 3.0 V
V
DD
= 3.0 V
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
Ta = 25°C
V
DD
= 3.0 V
R
L
= 1 MΩ
C
L
= 20 pF
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 19 of 23
Figure 3-21. HA1630S03
Total Harmonic Distortion + Noise vs.
Output Voltage p-p
0.001
0.01
0.1
1
10
0 0.5 1.0 1.5 2.0 2.5 3.0
Output Voltage Vout p-p (V)
T.H.D. + Noise (%)
V
DD
= 3.0 V
Ta = 25°C
Gain = 0 dB
f = 10 kHz
f = 100 Hz
f = 1 kHz V
DD
= 3.0 V
Ta = 25°C
Gain = 40 dB
f = 10 kHz
f = 100 Hz
f = 1 kHz
Figure 3-22. HA1630S03
Total Harmonic Distortion + Noise vs.
Output Voltage p-p
0.001
0.01
0.1
1
10
0 0.5 1.0 1.5 2.0 2.5 3.0
Output Voltage Vout p-p (V)
T.H.D. + Noise (%)
Figure 3-23. HA1630S03
Voltage Output p-p vs. Frequency
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
100 1k 10k 100k 1M
Frequency f (Hz)
Voltage Output Vout p-p (V)
Gain = 40 dB, Vp-p = 0.03 V
Gain = 20 dB, Vp-p = 0.3 V
Gain = 0 dB, Vp-p = 2.5 V
Ta = 25°C
V
DD
= 3.0 V
Figure 3-24. HA1630S03
Voltage Noise Density vs. Frequency
Voltage Noise Density (nV/√Hz)
100
200
0
Frequency f (Hz)
100 10k
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 20 of 23
Test Circuits
Measure V
O
corresponding to V
DD1
= 1.8 V and V
DD2
= 5.5 V
1. Power Supply Rejection Ratio, PSRP & Voltage Offset, V
IO
2. Supply Current, I
DD
3. Input Bias Current, I
IB
4. Output High Voltage, V
OH
5. Output Low Voltage, V
OL
R
L
= 1 MΩ
V
IN1
= V
DD
/ 2 − 0.05 V
V
IN2
= V
DD
/ 2 + 0.05 V
−
+
A
V
DD
V
DD
2
−
+
A
V
DD
V
DD
2
−
+
V
DD
V
O
V
DD
2
R
S
R
S
R
F
V
IO
V
OH
R
L
= 1 MΩ
V
IN1
= V
DD
/ 2 + 0.05 V
V
IN2
= V
DD
/ 2 − 0.05 V
V
OL
PSRR = −20log ×R
S
R
S
+ R
F
V
O1
− V
O2
V
DD1
− V
DD2
V
IO
= V
O
− × R
S
+ R
F
R
S
2
V
DD
PSRR
−
+
V
DD
V
O
V
IN1
V
IN2
R
L
−
+
V
DD
V
O
V
IN1
V
IN2
R
L
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 21 of 23
Measure V
O
corresponding to V
IN1
= 0 V and V
IN2
= 2.1 V
6. Output Source Current, I
OSOURCE
& Output Sink Current, I
OSINK
7. Common Mode Input Voltage, V
CM
& Common Mode Rejection Ratio, CMRR
10. Gain, A
V
& Phase, GBW
8. Total Harmonic Distortion, THD
9. Slew Rate, SR
Gain Variable
1 + R
F
/ R
S
= 100
freq = 100 Hz, 1 kHz, 10 kHz
THD
V
O
= V
DD
− 0.5 V
V
IN1
= V
DD
/ 2 − 0.05 V
V
IN2
= V
DD
/ 2 + 0.05 V
I
OSOURCE
V
O
= + 0.5 V
V
IN1
= V
DD
/ 2 + 0.05 V
V
IN2
= V
DD
/ 2 − 0.05 V
I
OSINK
CMRR = −20log ×R
S
R
S
+ R
F
V
O1
− V
O2
V
IN1
− V
IN2
CMRR
−
+
VDD
VO
V
IN1
V
IN2
A
−
+
V
DD
V
O
V
DD
2
R
S
V
IN
R
S
R
F
R
F
−
+
V
DD
V
SS
V
O
Gain Variable
V
IN
R
S
R
F
−
+
VDD
VSS
VO
20 pF1 MΩ
Gain = +1
V
IN
−
+
VDD
VSS
VO
R
S
R
S
R
F
−
+
VDD
VSS
VO
20 pF1 MΩ
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 22 of 23
Package Dimensions
D
e
A
Qc
AA
b
xSA
A
A
2
A
1
M
E
L
H
E
L
1
L
P
A
3
yS
Pattern of terminal position areas
S
I
1
b
2
e
e
1
A
A
1
A
2
A
3
b
b
1
c
c
1
D
E
e
H
E
L
L
1
L
P
x
y
b
2
e
1
I
1
Q
1.0
0
1.0
0.35
0.1
2.8
1.5
2.5
0.3
0.1
0.2
Min Nom
Dimension in Millimeters
Reference
Symbol
Max
1.1
0.25
0.42
0.4
0.13
0.11
2.95
1.6
0.95
2.8
2.15
0.3
1.3
0.1
1.2
0.5
0.15
3.1
1.8
3.0
0.7
0.5
0.6
0.05
0.05
0.55
0.85
SC-74A 0.015g
MASS[Typ.]
MPAK-5 / MPAK-5VPLSP0005ZB-A
RENESAS CodeJEITA Package Code Previous Code
b
A-A Section
b1c1
c
Package Name
MPAK-5
e
A
EH
E
L
L1
Q
c
D
b
AA
Pattern of terminal position areas
b2
l1
e1
e
A3
LP
S
A
A2
A1
A
A
1
A
2
b
b
1
c
c
1
D
E
e
H
E
L
L
P
x
y
b
2
e
1
l
1
Q
0.8
0
0.8
0.15
0.1
1.8
1.15
1.8
0.3
0.2
0.22
0.25
0.9
0.13
0.11
2.0
1.25
0.65
2.1
1.5
0.25
1.1
0.1
1.0
0.3
0.2
0.15
2.2
1.35
2.4
0.7
L
1
0.1 0.5
0.6
0.05
0.05
0.35
0.9
Dimension in Millimeters
Reference
Symbol
Min Nom Max
A
3
AS
M
x
S
y
SC-88A 0.006g
MASS[Typ.]
CMPAK-5 / CMPAK-5VPTSP0005ZC-A
RENESAS CodeJEITA Package Code Previous Code
b
A-A Section
b1c1
c
HA1630S01/02/03 Series
Rev.1.00 Mar 10, 2006 page 23 of 23
Taping & Reel Specification
Package Code
Package
Ordering Unit
W P Ao Ko E F Maximum Storage No.
MPAK-5
MPAK-5
4 1.5 1.05 3,000 pcs/reel
W1 W2
11.4 9
3,000 pcs
8
CMPAK-5 11.4 98
Tape width
[Taping]
[Reel]
[Ordering Information]
8 3.3 3.3 1.75 3.5
CMPAK-5 4 1.1 1.05 3,000 pcs/reel8 2.25 2.45 1.75 3.5
Bo D1
Unit: mm
φ1.5
4.0
2.0
A
B
P
0
0
1
D
W
FE
K
0
Cover
tape
Tape withdraw direction
φ13 ± 0.5
φ178 ± 2
11.4
9.0
4 ± 0.5
120°
2.0
±
0.5
Mark Indication
1 A : HA1630S01
1 B : HA1630S02
1 C : HA1630S03
1 B
= Contorol code
( or blank)
MarkingIndex band
Keep safety first in your circuit designs!
1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble
may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage.
Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary
circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap.
Notes regarding these materials
1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's
application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party.
2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data,
diagrams, charts, programs, algorithms, or circuit application examples contained in these materials.
3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of
publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is
therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product
information before purchasing a product listed herein.
The information described here may contain technical inaccuracies or typographical errors.
Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors.
Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor
home page (http://www.renesas.com).
4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to
evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes
no responsibility for any damage, liability or other loss resulting from the information contained herein.
5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life
is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a
product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater
use.
6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials.
7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and
cannot be imported into a country other than the approved destination.
Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein.
Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan
http://www.renesas.com
Refer to "http://www.renesas.com/en/network" for the latest and detailed information.
Renesas Technology America, Inc.
450 Holger Way, San Jose, CA 95134-1368, U.S.A
Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501
Renesas Technology Europe Limited
Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K.
Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900
Renesas Technology (Shanghai) Co., Ltd.
Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120
Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7898
Renesas Technology Hong Kong Ltd.
7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong
Tel: <852> 2265-6688, Fax: <852> 2730-6071
Renesas Technology Taiwan Co., Ltd.
10th Floor, No.99, Fushing North Road, Taipei, Taiwan
Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999
Renesas Technology Singapore Pte. Ltd.
1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632
Tel: <65> 6213-0200, Fax: <65> 6278-8001
Renesas Technology Korea Co., Ltd.
Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea
Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145
Renesas Technology Malaysia Sdn. Bhd
Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia
Tel: <603> 7955-9390, Fax: <603> 7955-9510
RENESAS SALES OFFICES
© 2006. Renesas Technology Corp., All rights reserved. Printed in Japan.
Colophon .6.0