112135 - AMPHENOL RF - Datasheet.Directory

BNC COAXIAL CONNECTORS

The Connex BNC connectors are made to a high quality level. Medium size coaxial

connectors with bayonet lock. 50 ohm impedance for applications up to 4 GHz and 75 ohm

impedance up to 2 GHz.

75 OHM SERIES

Within the internationally standardized BNC mating face dimensions, a perfect 75 ohm

characteristic impedance cannot be realized. However, at frequencies up to 1000 MHz, the

small impedance deviation is negligible for practical applications. Connex true

75 ohm connectors with a typical VSWR reading of 1.06:1 at 2000 MHz are identified by

an asterisk following the part number.

All 75 ohm BNC connectors and 50 ohm BNC connectors are intermateable without

restrictions.

Note: Silverplated bodies are available by adding “S” to end of part number . Nexcote (white

bronze) plating with no nickel under body or center contact is available by adding

“NEX” to end of part number.

Impedance 50 ohm 75 ohm

Frequency Range 0–4 GHz 0–1 GHz

Working Voltage 500 Volts rms. 500 Volts rms.

Dielectric Withstanding Voltage 1500 Volts rms. 1500 Volts rms.

VSWR 1.3 max. 0–4 GHz 1.05+0.1f(GHz) DC to 1 GHz

Contact Resistance Center contact 1.5 milliohm Center contact 1.5 milliohm

Outer contact 1.0 milliohm Outer contact 1.0 milliohm

Insulation Resistance 5000 megohms (min) 5000 megohms (min)

PARTS NAME MATERIAL FINISH

Center Male Brass Gold or Silver plated

Contact Female Phosphor Bronze (nominal) or Gold or Silver plated

Beryllium Copper

Metal parts Brass Nickel*

Insulators Teflon, Delrin, PBT polyester None

Clamp gaskets Silicone rubber, Synthetic rubber None

Crimp ferrule Annealed copper Nickel*

ELECTRICAL SPECIFICATIONS

MATERIAL SPECIFICATIONS

BNC.4 11/27/01 5:29 PM Page 67

BNC COAXIAL CONNECTORS

INTERFACE MATING DIMENSIONS

NOTE 1: I.D. TO MEET VSWR AND CONTACT RESISTANCE WHEN MATED WITH

1.32/1.37 MM DIA. PIN.

Letter Millimeters [Inches]

Minimum Maximum

A 10.97 [.432] 11.07 [.436]

B 9.60 [.378] 9.70 [.382]

C 8.31 [.327] 8.46 [.333]

D 8.10 [.319] 8.15 [.321]

E–4.72 [.186]

F 5.18 [.204] 5.28 [.208]

G 8.31 [.327] 8.51 [.335]

H 1.91 [.075] 2.06 [.081]

I 4.78 [.188] 5.28 [.208]

J 4.72 [.186] 5.23 [.206]

K–0.15 [.006]

L 4.95 [.195] –

M 2.06 [.081] 2.21 [.087]

N 8.79 [.346] 9.04 [.356]

P–6.50 [.256]

R 0.38 [.015] 0.76 [.030]

S 10.52 [.414] –

Letter Millimeters [Inches]

Minimum Maximum

A 9.78 [.385] 9.91 [.390]

BFLARED TO MEET GOOD

ELECTRICAL CONTACT

C 4.83 [.190] –

D 1.32 [.052] 1.37 [.054]

E 5.33 [.210] 5.84 [.230]

F 0.15 [.006] 0.46 [.018]

L 0.08 [.003] 1.02 [.040]

N–0.64 [.025]

P 5.28 [.208] 5.79 [.228]

Q 1.98 [.078] –

R 2.06 [.081] 2.21 [.087]

PLUG

JACK

BNC.4 11/27/01 5:29 PM Page 68

Diecast shell

112108 01 Nickel Delrin 50 E

112110 03 Nickel Delrin 50 E

112112 02 Nickel Delrin 50 E

112114 04 Nickel Delrin 50 E

Remark: Only for Solid Center Conductor Cable

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — SINGLE CRIMP

BNC COAXIAL CONNECTORS

PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

Brass Shell

112116 01 Nickel Delrin 50 A

112514 01A Nickel Delrin 50 A

112597 01B Nickel Teflon 50 A

112118 03 Nickel Delrin 50 A

112119 03 Nickel Delrin 75 A

112952* 03 Nickel Teflon 75 A

112507 03A Nickel Delrin 75 A

112956* 03A Nickel Teflon 75 A

112650 — Nickel Teflon 75 A

COMMSCOPE F59 HEC-2/B1186A CABLE

112562 07 Nickel Teflon 50 D

112589 07A Nickel Teflon 50 D

112533 07B Nickel Delrin 50 A

112563 07C Nickel Teflon 50 L

112627 07D Nickel Teflon 50 L

112576 07E Nickel Teflon 75 D

112669 07E Nickel Teflon 50 D

112606 07F Nickel Teflon 75 D

112508 08 Nickel Delrin 75 E

112565 08A Nickel Delrin 75 E

112957* 08A Nickel Teflon 75 H

112519 08B Nickel Delrin 75 E

112958* 08B Nickel Teflon 75 E

112509 15 Nickel Delrin 75 E

112953* 15 Nickel Teflon 75 E

112625 15A Nickel Delrin 75 E

112951* 18 Nickel Teflon 75 A

112950* 19 Nickel Teflon 75 B

112700 LMR300™ Nickel Teflon 50 D/E

Diecast Shell

112120 01 Nickel Delrin 50 A

112122 03 Nickel Delrin 50 A

112123 03 Nickel Delrin 75 A

*Center contact .053" diameter, 30µ" Au.

True 75 ohm. Use .044 hex or 12-indent crimp

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — STANDARD CABLE

BNC COAXIAL CONNECTORS

All connector bodies, unless otherwise

noted, are nickel plated. Center contacts

are 3µ" gold plated. Insulators are Delrin,

unless otherwise noted.

Silver plating and Teflon insulators are

available on virtually all BNC connectors.

Please contact Connex for samples and

quotes.

All dimensions in millimeters and [inches].

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

01 58/ 58A/ 58C/ 141/ 303/

LMR195

™

/ B7806A

01A 55/ 142/ 223/ 400

01B LMR200

™

/ B7807A

02 58 PLENUM/THINNET/

122U/ B88240/ B89907

03 59/ 62/ 140/ 210

03A 59/ U-20AWG

04 59/ U PLENUM

04A 59/ U PLENUM-20AWG

05 174/ 188A/ 316/ B7805A

05A 316/ U DOUBLE BRAIDED

06 179/ 187/ B9221

06A 179/ U DOUBLE BRAIDED

07 8/ 8A/ 213/ 393

07A 214

07B 8X/ LMR240

™

/ B7808A

07C B9913/ LMR400

™

B7810A/ B8214

07D B89913

07E 11

07F 11/ U-14AWG/ B8213/

B9292/ B7731/ B1859A

08 6/ 143/ 212

08A B1694A/ B9248

08B 6 PLENUM/ B1695A

09 B8227/ 89207

10 .141 SEMI-RIGID/ 402/U

11 .085 SEMI-RIGID/ 405/U

12 .250 SEMI-RIGID

13 .047 SEMI-RIGID/ B1674A

14 178/ 196

15 B8281/ B9231/ B9141

15A B88281

16 180/ 195/ 122/ B8218/

B1865A/ B1855

17 LMR6OO

™

18 AT&T734A/ B1505A

19 AT&T735A/ B735A1

CABLE GROUP LEGEND

BNC.4 11/27/01 5:29 PM Page 69

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BNC COAXIAL CONNECTORS

Brass Shell

112124 02 Nickel Delrin 50 A

112127 04 Nickel Delrin 75 A

112544 04A Nickel Delrin 75 A

Diecast Shell

112128 02 Nickel Delrin 50 A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — PLENUM CABLE

112551 10 Nickel/Gold Teflon 50 N/A

112520 10 Nickel/Gold Teflon 75 N/A

112552 11 Nickel/Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT SOLDER PLUG — SEMI-RIGID CABLE

PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112551

112552

Brass Shell

112132 05 Nickel Delrin 50 B

112512 05A Nickel Delrin 50 B

112133 06 Nickel Delrin 75 B

112644 06A Nickel Delrin 75 B

112516 14 Nickel Delrin 50 B

112521 16 Nickel Delrin 75 B

112955* 16 Nickel Teflon 75 B

112975* 04A Nickel Teflon 75 B

Diecast Shell

112134 05 Nickel Delrin 50 B

112135 06 Nickel Delrin 75 B

Remark: With teflon sleeve/Hex crimp size.178"

*Center contact .053" diameter, 30µ" Au.

True 75 ohm. Use .044 hex or 12-indent crimp

STRAIGHT CRIMP PLUG — CAPTIVE CONTACT — MINIATURE CABLE

BNC.4 11/27/01 5:29 PM Page 70

BNC COAXIAL CONNECTORS

Brass Shell

112136 05 Nickel Delrin 50 B

112137 06 Nickel Delrin 75 B

Diecast Shell

112138 05 Nickel Delrin 50 B

112139 06 Nickel Delrin 75 B

Remark: Hex. crimp size .128"

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — PIN-IN-PIN — MINIATURE CABLE

Brass Shell

112140 06 Nickel TPX 75 B

Diecast Shell

112142 06 Nickel TPX 75 B

Remark: TPX Insulator/75 ohm AVAILABLE ONLY

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP PLUG — MINIATURE CABLE

PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

Ferrule Crimp Tool Crimped Size .128"

Tool No. 47-10150

4–Way Indent Crimp

Tool No. 47001

BNC.4 11/27/01 5:29 PM Page 71

Brass Shell

112170 02 Nickel Delrin 50 A

112173 04 Nickel Delrin 75 A

Diecast Shell

112174 02 Nickel Delrin 50 A

112177 04 Nickel Delrin 75 A

Remark: Cable Center Conductor Solder to pin directly

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP/SOLDER PLUG — PLENUM CABLE

BNC COAXIAL CONNECTORS

Brass Shell

112162 01 Nickel Delrin 50 A

112526 01A Nickel Delrin 50 A

112599 01B Nickel Teflon 50 A

112164 03 Nickel Delrin 50 A

112165 03 Nickel Delrin 75 A

112960* 03 Nickel Teflon 75 A

112467 01 Nickel Teflon 50 A

112470 03 Nickel Teflon 75 A

112594 07 Nickel Teflon 50 D

112595 07A Nickel Teflon 50 D

112601 07B Nickel Delrin 50 A

112596 07C Nickel Delrin 50 D

112961* 18 Nickel Teflon 75 A

112962* 19 Nickel Teflon 75 B

Diecast Shell

112166 01 Nickel Delrin 50 A

112168 03 Nickel Delrin 50 A

112169 03 Nickel Delrin 75 A

Remark: Cable Center Conductor Solder to pin directly

*Center contact .053" diameter, 30µ" Au.

True 75 ohm. Use .044 hex or 12-indent crimp

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP/SOLDER PLUG — STANDARD CABLE

Brass Shell

112178 05 Nickel Delrin 50 B

112528 05A Nickel Delrin 50 B

112179 06 Nickel Delrin 75 B

112646 06A Nickel Delrin 75 B

112588 16 Nickel Delrin 75 B

Remark: Cable Center Conductor Solder to pin directly

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP/SOLDER PLUG — MINIATURE CABLE

RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

BNC.4 11/27/01 5:29 PM Page 72

Brass Shell

112190 02 Nickel Delrin 50 A

112193 04 Nickel Delrin 75 A

Diecast Shell

112194 02 Nickel Delrin 50 A

112197 04 Nickel Delrin 75 A

Remark: Crimp/Crimp Type

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP/CRIMP PLUG — PLENUM CABLE

BNC COAXIAL CONNECTORS

Brass Shell

112182 01 Nickel Delrin 50 A

112184 03 Nickel Delrin 50 A

112185 03 Nickel Delrin 75 A

112540 08 Nickel Teflon 75 E

112539 15 Nickel Teflon 75 A

Diecast Shell

112186 01 Nickel Delrin 50 A

112189 03 Nickel Delrin 75 A

Remark: Crimp/Crimp Type

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP/CRIMP PLUG — STANDARD CABLE

Brass Shell

112198 05 Nickel Delrin 50 B

112199 06 Nickel Delrin 75 B

Diecast Shell

112200 05 Nickel Delrin 50 B

112201 06 Nickel Delrin 75 B

Remark: With teflon sleeve Hex. crimp size .178"

Crimp/Crimp Type

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CRIMP/CRIMP PLUG — MINIATURE CABLE

RIGHT ANGLE PLUG CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112617 10 Nickel/Gold Teflon 50 N/A

112614 11 Nickel/Gold Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE SOLDER PLUG — SEMI-RIGID CABLE

BNC.4 11/27/01 5:29 PM Page 73

BNC COAXIAL CONNECTORS

Captured

112144 01 Nickel Teflon 50 A

112148 01 Nickel Delrin 50 A

112513 01A Nickel Delrin 50 A

112598 01B Nickel Teflon 50 A

112146 03 Nickel Teflon 50 A

112147 03 Nickel Teflon 75 A

112150 03 Nickel Delrin 50 A

112649 03A Nickel Teflon 75 A

112605 07B Nickel Teflon 50 A

112603 07C Nickel Teflon 50 D

112965* 08A Nickel Teflon 75 H

112966* 08B Nickel Teflon 75 E

112628 15 Nickel Teflon 75 E

112973* 18 Nickel Teflon 75 A

112974* 19 Nickel Teflon 75 B

*Center contact .052" diameter, 30µ" Au. True 75 ohm.

Use .044 hex or 12-indent crimp

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP JACK — STANDARD CABLE

Teflon/Captured

112152 02 Nickel Teflon 50 A

112155 04 Nickel Teflon 75 A

112645 04A Nickel Teflon 75 A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP JACK — PLENUM CABLE

112160 05 Nickel Delrin 50 B

112529 05A Nickel Teflon 50 B

112161 06 Nickel Delrin 75 B

112647 06A Nickel Delrin 75 B

112618 10 Nickel/Gold Teflon 50 N/A

112615 11 Nickel/Gold Teflon 50 N/A

112631 14 Nickel Delrin 50 B

112559 16 Nickel Delrin 75 B

Remark: With teflon sleeve, Hex crimp size .178"

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CRIMP JACK — MINIATURE AND SEMI-RIGID CABLE

JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112636 05 Nickel Teflon 50 B

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — SNAP-IN PANEL

BNC.4 11/27/01 5:29 PM Page 74

Teflon/Captured

112210 01 Nickel Teflon 50 A

112213 03 Nickel Teflon 75 A

Remark: 6.5 [.256] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — STANDARD CABLE

BNC COAXIAL CONNECTORS

Teflon/Captured

112202 01 Nickel Teflon 50 A

112505 01A Nickel Teflon 50 A

112600 01B Nickel Teflon 50 A

112204 03 Nickel Teflon 50 A

112205 03 Nickel Teflon 75 A

112630 03A Nickel Teflon 75 A

112602 07B Nickel Teflon 50 A

112604 07C Nickel Teflon 50 L

112662 08A Nickel Teflon 75 E

112982•08A Nickel Teflon 75 E

112593 08B Nickel Teflon 50 E

112629 15 Nickel Teflon 75 E

Delrin/Non Captured

112206 01 Nickel Delrin 50 A

112208 03 Nickel Delrin 50 A

112209 03 Nickel Delrin 75 A

Remark: 3.5 [.138] Max. panel thickness

*Center contact .053" diameter, 30µ" Au.

True 75 ohm. Use .044 hex or 12-indent crimp

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — STANDARD CABLE

Teflon/Captured

112218 02 Nickel Teflon 50 A

112221 04 Nickel Teflon 75 A

Remark: 3.5 [.138] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — PLENUM CABLE

BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

BNC.4 11/27/01 5:29 PM Page 75

112581 10 Nickel/Gold Teflon 50 N/A

112580 11 Nickel/Gold Teflon 50 N/A

112609 11 Nickel/Gold Teflon 50 N/A

FRONT MOUNT

112632 11 Nickel/Gold Teflon 75 N/A

FRONT MOUNT

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD SOLDER JACK — SEMI-RIGID CABLE

BNC COAXIAL CONNECTORS

112234 05 Nickel Delrin 50 B

112517 05A Nickel Delrin 50 B

112635 05A Nickel Teflon 50 C

FRONT MOUNT

112235 06 Nickel Delrin 75 B

112654 06 Nickel Teflon 75 B

FRONT MOUNT

112648 06A Nickel Delrin 75 B

112522 14 Nickel Delrin 50 B

112568 16 Nickel Teflon 75 B

112970* 18 Nickel Teflon 75 A

112969* 19 Nickel Teflon 75 B

*Center contact .052" diameter, 30µ" Au, true 75 ohm.

Use .044 Hex. crimp or 12-indent crimp.

112587 05 Nickel Teflon 50 B

FRONT MOUNT

112634 05A Nickel Teflon 50 C

FRONT MOUNT

Remark: With teflon sleeve, Hex. crimp size .178",

3.5 [.138] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — MINIATURE CABLE

BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112587, 112634

Teflon/Captured

112226 02 Nickel Teflon 50 A

112229 04 Nickel Teflon 75 A

Remark: 6.5 [.256] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CRIMP JACK — PLENUM CABLE

BNC.4 11/27/01 5:29 PM Page 76

112252 05 Nickel Teflon 50 B

112253 06 Nickel Teflon 75 B

Remark: 6.0 [.236] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD ISOLATED CRIMP JACK — MINIATURE CABLE

BNC COAXIAL CONNECTORS

112244 02 Nickel Teflon 50 A

112247 04 Nickel Teflon 75 A

Remark: 6.0 [.236] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD ISOLATED CRIMP JACK — PLENUM CABLE

BULKHEAD JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

Teflon/Captured

112236 01 Nickel Teflon 50 A

112652 01A Nickel Teflon 50 A

112238 03 Nickel Teflon 50 A

112239 03 Nickel Teflon 75 A

Remark: 6.0 [.236] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD ISOLATED CRIMP JACK — STANDARD CABLE

BNC.4 11/27/01 5:29 PM Page 77

Teflon/Captured

112280 02 Nickel Teflon 50 A

112283 04 Nickel Teflon 75 A

Remark: 5.0 [.197] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL CRIMP JACK — PLENUM CABLE

BNC COAXIAL CONNECTORS

Teflon/Captured

112272 01 Nickel Teflon 50 A

112527 01A Nickel Delrin 50 A

112274 03 Nickel Teflon 50 A

112275 03 Nickel Teflon 75 A

Remark: 5.0 [.197] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL CRIMP JACK — STANDARD CABLE

112288 05 Nickel Delrin 50 B

112530 05A Nickel Delrin 50 B

112289 06 Nickel Delrin 75 B

112619 10 Nickel/Gold Teflon 50 N/A

112616 11 Nickel/Gold Teflon 50 N/A

Remark: 5.0 [.197] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL CRIMP JACK — MINIATURE AND SEMI-RIGID CABLE

PANEL JACK CRIMP ATTACHMENTS FOR FLEXIBLE CABLE/RECEPTACLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

BNC.4 11/27/01 5:29 PM Page 78

BNC COAXIAL CONNECTORS

CLAMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

Brass Shell

112348 01 Nickel Delrin 50 N/A

112350 03 Nickel Delrin 50 N/A

112351 03 Nickel Delrin 75 N/A

112477 06 Nickel Teflon 75 N/A

Diecast Shell

112352 01 Nickel Delrin 50 N/A

112354 03 Nickel Delrin 50 N/A

Remark: UG-88/U, UG-260/U

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP PLUG — CAPTIVE CONTACT

Brass shell

112332 01 Nickel Delrin 50 N/A

112334 03 Nickel Delrin 50 N/A

112335 03 Nickel Delrin 75 N/A

112531 07 Nickel Teflon 50 N/A

112558 07E Nickel Teflon 75 N/A

112657 07F Nickel Teflon 75 N/A

Remark: Barrel O.D. = 12.5 mm

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP PLUG — CAPTIVE CONTACT

Brass Shell

112356 01 Nickel Delrin 50 N/A

112358 03 Nickel Delrin 50 N/A

112359 03 Nickel Delrin 75 N/A

112360 02 Nickel Delrin 50 N/A

112362 04 Nickel Delrin 50 N/A

112363 04 Nickel Delrin 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE CLAMP PLUG

112372 01 Nickel Teflon 50 N/A

112374 03 Nickel Teflon 50 N/A

112375 03 Nickel Teflon 75 N/A

112376 02 Nickel Teflon 50 N/A

112378 04 Nickel Teflon 50 N/A

112379 04 Nickel Teflon 75 N/A

112642 07 Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT CLAMP JACK — CAPTIVE CONTACT

BNC.4 11/27/01 5:29 PM Page 79

BNC COAXIAL CONNECTORS

CLAMP ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112577 01 Nickel Teflon 50 N/A

112612 05 Nickel Teflon 50 N/A

112613 06 Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD CLAMP JACK — CAPTIVE CONTACT

TWIST–ON ATTACHMENTS FOR FLEXIBLE CABLE

112308 01 Nickel Delrin 50 N/A

112310 03 Nickel Delrin 50 N/A

112312 02 Nickel Delrin 50 N/A

112314 04 Nickel Delrin 50 N/A

Remark: Only for solid center conductor cable

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

TWIST-ON JACK

Brass Shell

112292 01 Nickel Delrin 50 N/A

112294 03 Nickel Delrin 50 N/A

112295 03 Nickel Delrin 75 N/A

112296 02 Nickel Delrin 50 N/A

112298 04 Nickel Delrin 50 N/A

112299 04 Nickel Delrin 75 N/A

112485 08 Nickel Delrin 75 N/A

Diecast Shell

112300 01 Nickel Delrin 50 N/A

112302 03 Nickel Delrin 50 N/A

112303 03 Nickel Delrin 75 N/A

112486 08 Nickel Delrin 75 N/A

Remark: Only for solid center conductor cable

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

TWIST–ON PLUG

BNC.4 11/27/01 5:29 PM Page 80

BNC COAXIAL CONNECTORS

TWIST–ON ATTACHMENTS FOR FLEXIBLE CABLE

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

Diecast Shell

112324 01 Nickel Delrin 50 N/A

112326 03 Nickel Delrin 50 N/A

112327 03 Nickel Delrin 75 N/A

112328 02 Nickel Delrin 50 N/A

112330 04 Nickel Delrin 50 N/A

Remark: Only for solid center conductor cable

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE TWIST–ON PLUG

112396 01 Nickel Teflon 50 N/A

112398 03 Nickel Teflon 50 N/A

112399 03 Nickel Teflon 75 N/A

112400 02 Nickel Teflon 50 N/A

112402 04 Nickel Teflon 50 N/A

112403 04 Nickel Teflon 75 N/A

Remark: With wedge contact

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

WEDGE COMPRESSION JACK

Brass Shell

112380 01 Nickel Delrin 50 N/A

112382 03 Nickel Delrin 50 N/A

112383 03 Nickel Delrin 75 N/A

112384 02 Nickel Delrin 50 N/A

112386 04 Nickel Delrin 50 N/A

112387 04 Nickel Delrin 75 N/A

Remark: With wedge pin

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

WEDGE COMPRESSION PLUG

WEDGE COMPRESSION ATTACHMENTS FOR FLEXIBLE CABLE

BNC.4 11/27/01 5:29 PM Page 81

BNC COAXIAL CONNECTORS

BULKHEAD RECEPTACLE/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

Brass Shell

112420 N/A Nickel Delrin 50 N/A

112421 N/A Nickel Delrin 75 N/A

Remark: 4.5 [.177] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE PLUG

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE JACK

112431 N/A Nickel ABS 50 N/A

112432 N/A Nickel ABS 75 N/A

Remark: Isolated from ground,

3.2 [.126] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE ISOLATED JACK

L1 = 3.2 [.126] Max. panel thickness, L = 26.7 [1.05]

112424 N/A Nickel Delrin 50 N/A

112424T N/A Nickel Teflon 50 N/A

112575 N/A Nickel Delrin 50 N/A

DIE CAST BODY

112575-75

N/A Nickel Delrin 75 N/A

DIE CAST BODY

112425 N/A Nickel Delrin 75 N/A

L1 = 6.5 [.256] Max. panel thickness, L = 30.0 [1.18]

112426 N/A Nickel Delrin 50 N/A

112427 N/A Nickel Delrin 75 N/A

L1 = 9.5 [.374] Max. panel thickness, L = 33.0 [1.30]

112428 N/A Nickel Delrin 50 N/A

112429 N/A Nickel Delrin 75 N/A

BNC.4 11/27/01 5:29 PM Page 82

BNC COAXIAL CONNECTORS

BULKHEAD RECEPTACLE/SOLDER POT TERMINALS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112579 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE — PRESS FIT

112607 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE — PRESS FIT

112624 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD RECEPTACLE ISOLATED JACK — REAR MOUNT

BNC.4 11/27/01 5:29 PM Page 83

BNC COAXIAL CONNECTORS

PANEL RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112524N N/A Nickel Teflon 50 N/A

112524S N/A Silver Teflon 50 N/A

NOTE: Consult factory for other lengths available

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE JACK — EXPOSED TFE TYPE

112639 N/A Nickel Teflon 50 N/A

Note: Consult factory for other lengths available.

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE — EXPOSED TEFLON — GASKET SEAL

112290 N/A Nickel Teflon 50 N/A

112291 N/A Nickel Teflon 75 N/A

112492 N/A Nickel Teflon 50 N/A

FLUSH REAR

112511 N/A Nickel Teflon 50 N/A

FLUSH REAR 4-40 SCREWS

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE JACK

112653 N/A Nickel Teflon 50 A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PANEL RECEPTACLE PLUG

BNC.4 11/27/01 5:29 PM Page 84

BNC COAXIAL CONNECTORS

PRINTED CIRCUIT BOARD/RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112538 N/A Nickel Teflon 50 N/A

112543 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

112515 N/A Nickel Teflon 50 N/A

112591 N/A Nickel Teflon 50 N/A

WATERPROOF

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

112553 N/A Nickel Teflon 50 N/A

112553-10

N/A Nickel Teflon 75 N/A

WATERPROOF

112554 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

112404 N/A Nickel Teflon 50 N/A

112405 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

Mounting Hole Dia. see “TYPE C” page 185

BNC.4 11/27/01 5:29 PM Page 85

BNC COAXIAL CONNECTORS

PRINTED CIRCUIT BOARD/RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112586 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

112406 N/A Nickel Teflon 50 N/A

112407 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

112536 N/A Nickel Teflon 50 N/A

112578 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK

Mounting Hole Dia. see “TYPE F” page 185

112483 N/A Nickel Teflon 50 N/A

3 LEGS

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB MOUNT JACK — THREE LEGS

BNC.4 11/27/01 5:30 PM Page 86

BNC COAXIAL CONNECTORS

PRINTED CIRCUIT BOARD/RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112608 N/A Nickel Teflon 50 N/A

112622 N/A Nickel Teflon 75 N/A

SQUARE FLANGE

112640 N/A Nickel Teflon 50 N/A

112641 N/A Nickel Teflon 75 N/A

ROUND FLANGE

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

STRAIGHT PCB EDGE MOUNT JACK — END LAUNCH

112608

112640

112633 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BULKHEAD VERTICAL PCB RECEPTACLE — END LAUNCH

White Housing

112408 N/A Nickel Polypropylene 50 N/A

112409 N/A Nickel Polypropylene 75 N/A

Black Housing

112410 N/A Nickel Polypropylene 50 N/A

112411 N/A Nickel Polypropylene 75 N/A

Remark: Add L to part number for Locking Legs

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

COMMERCIAL STRAIGHT PCB MOUNT JACK

Mounting Hole Dia. see “TYPE G” page 185

BNC.4 11/27/01 5:30 PM Page 87

BNC COAXIAL CONNECTORS

PRINTED CIRCUIT BOARD/RECEPTACLES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

Diecast

112488 N/A Nickel Polypropylene 50 N/A

112495 N/A Nickel Polypropylene 75 N/A

Note: Connectors are shipped with lock nut and washer

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

COMMERCIAL STRAIGHT PCB MOUNT JACK — METAL BODY

High Profile, 15.88 [.625] White

112412 N/A Nickel Polypropylene 50 N/A

112413 N/A Nickel Polypropylene 75 N/A

High profile, 15.88 [.625] Black

112414 N/A Nickel Polypropylene 50 N/A

112415 N/A Nickel Polypropylene 75 N/A

Low Profile, 13.1 [.516] White

112416 N/A Nickel Polypropylene 50 N/A

112417 N/A Nickel Polypropylene 75 N/A

Low Profile, 13.1 [.516] Black

112418 N/A Nickel Polypropylene 50 N/A

112419 N/A Nickel Polypropylene 75 N/A

Remark: Add L to part number for Locking Legs

Note: Connectors are shipped with lock nut and washer

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

COMMERCIAL RIGHT ANGLE PCB MOUNT JACK

Mounting Hole Dia. see “TYPE G” page 185

Mounting Hole Dia. see “TYPE H” page 185

Diecast

High Profile, 15.88 [.625]

112502 N/A Nickel Polypropylene 50 N/A

112503 N/A Nickel Polypropylene 75 N/A

Low Profile, 13.1 [.516]

112487 N/A Nickel Polypropylene 50 N/A

112494 N/A Nickel Polypropylene 75 N/A

Note: Connectors are shipped with lock nut and washer

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

COMMERCIAL RIGHT ANGLE PCB MOUNT JACK — METAL BODY

Mounting Hole Dia. see “TYPE H” page 185

112659 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE PCB MOUNT RECEPTACLE — METAL BODY

BNC.4 11/27/01 5:30 PM Page 88

112435 N/A Nickel Delrin 50 N/A

112436 N/A Nickel Delrin 75 N/A

Remark: 7.0 mm [.276] Max. panel thickness,

UG–492A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK BULKHEAD ADAPTER

BNC COAXIAL CONNECTORS

112433 N/A Nickel Delrin 50 N/A

112434 N/A Nickel Delrin 75 N/A

Remark: 8.0 mm [.315] Max. panel thickness,

M55339/13–00492

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK BULKHEAD ADAPTER

112437 N/A Nickel Delrin 50 N/A

112438 N/A Nickel Delrin 75 N/A

Remark: Without gasket, 5.5 mm [.217] Max.

panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK BULKHEAD ADAPTER

112532 N/A Nickel Teflon 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-PLUG BULKHEAD ADAPTER — PUSH-ON

BULKHEAD FEEDTHROUGH ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

BNC.4 11/27/01 5:30 PM Page 89

112443 N/A Nickel Delrin 50 N/A

112444 N/A Nickel Delrin 75 N/A

Remark: Isolated from ground,

5.5 mm [.217] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER

BNC COAXIAL CONNECTORS

112439 N/A Nickel Delrin 50 N/A

112440 N/A Nickel Delrin 75 N/A

Remark: With Isolated Bushing,

4.5 mm [.177] Max. panel thickness

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK BULKHEAD — ISOLATED ADAPTER

BULKHEAD ISOLATED GROUND ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

WHITE HOUSING

112660 N/A Nickel Polypropylene 50 N/A

BLACK HOUSING

112661 N/A Nickel Polypropylene 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

DUAL PORT RIGHT ANGLE PCB MOUNT RECEPTACLE

BNC.4 11/27/01 5:30 PM Page 90

Brass Shell

112447 N/A Nickel Delrin 50 N/A

112448 N/A Nickel Delrin 75 N/A

Diecast Shell

112449 N/A Nickel Delrin 50 N/A

112450 N/A Nickel Delrin 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

PLUG-TO-PLUG ADAPTER

BNC COAXIAL CONNECTORS

112445 N/A Nickel Delrin 50 N/A

112446 N/A Nickel Delrin 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

JACK-TO-JACK ADAPTER

Brass Shell

112451 N/A Nickel Delrin 50 N/A

112452 N/A Nickel Delrin 75 N/A

Diecast Shell

112453 N/A Nickel Delrin 50 N/A

112454 N/A Nickel Delrin 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE ADAPTER — PLUG-TO-JACK

ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

112655 N/A Nickel Delrin 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

RIGHT ANGLE ADAPTER — PLUG-TO-PLUG

BNC.4 11/27/01 5:30 PM Page 91

BNC COAXIAL CONNECTORS

112455 N/A Nickel Delrin 50 N/A

112456 N/A Nickel Delrin 75 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

TEE ADAPTER — JACK-TO-JACK-TO-JACK

112461 N/A Nickel Delrin 50 N/A

112462 N/A Nickel Delrin 75 N/A

Remark: Diecast Version

Remark: TEE contact pin isolated completely

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

TEE ADAPTER — JACK-TO-PLUG-TO-JACK

112567 N/A Nickel Delrin 50 N/A

112590 N/A Nickel Teflon 50 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

TEE ADAPTER — JACK-TO-JACK-TO-PLUG

TEE ADAPTERS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

BNC.4 11/27/01 5:30 PM Page 92

BNC COAXIAL CONNECTORS

TERMINATORS

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

202120 N/A Nickel Delrin 50 N/A

202111 N/A Nickel Delrin 75 N/A

112504 N/A Nickel Delrin 500 N/A

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BNC TERMINATOR JACK

202103 N/A Nickel Delrin 50 N/A

202104 N/A Nickel Teflon 50 N/A

202105 N/A Nickel Delrin 75 N/A

202106 N/A Nickel Teflon 75 N/A

202107 N/A Nickel Delrin 93 N/A

202108 N/A Nickel Teflon 93 N/A

202113 N/A Nickel Teflon 50 N/A

HIGH PERFORMANCE

202119 N/A Nickel Teflon 75 N/A

HIGH PERFORMANCE

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BNC TERMINATOR PLUG

BNC.4 11/27/01 5:30 PM Page 93

BNC COAXIAL CONNECTORS

ACCESSORIES

For Reverse Polarized connecters, add RP to standard part number. Contact Connex marketing for availability.

For Crimp Tool information, see page 183.

For Cable Group Legend, see page 69

202114 N/A Nickel Teflon N/A N/A

LESS CHAIN

202115 N/A Nickel Teflon N/A N/A

WITH CHAIN

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BNC MALE SHORTING CAP

202100 N/A Nickel N/A N/A N/A

WITH CHAIN

Remark: Chain Length 100 mm

202100-10

N/A Nickel N/A N/A N/A

LESS CHAIN

Cable Crimp

P.N. Group Finish Insulation Impedance Tool

BNC MALE CAP & CHAIN

BNC.4 11/27/01 5:30 PM Page 94