Q SERIES O6mm (.236") Panel Mount LED Indicators Distinctive features and specification Q6_VOY1609R1US Features * 6mm panel mounting LED indicator * 3mm colored diffused epoxy lens or 3mm water clear super bright LEDs * Plated brass bezel finished in bright chrome, black chrome or satin grey and moulded polycarbonate rear body * * * * * Prominent, recessed and flush bezel styles 2VDC - 28VDC (2.0 x 0.5) solder lug terminals, pins or (200mm long) wire terminations IP67 sealing option (EN60529) Supplied with fixing nut and spring washer NB: UL Recognized Component TECHNICAL SPECIFICATIONS Voltage 02 (No Resistor) 6VDC 12VDC 24VAC/DC 28VDC Operating Voltage (Min to Max) 1.8 to 3.8VDC 5.4 to 6.6VDC 10.8 to 13.2VDC 21.6 to 26.4VDC 25.2 to 30.8VDC Operating Current (Typical All Types) 20mA max* 20mA 20mA 20mA 20mA Max Reverse Voltage: 5V Viewing Angle: 30-100 (dependant on model) Life Expectancy: 100,000 hours Temperature Range: -40 to +85C (operating & storage) Torque: 4cNm O 6.00 +0.15/-0.0 8,00 0,315 AF 2,00 0,079 PANEL CUTOUT M6 x 0,50 THREAD Standard LED Intensity HE Red Green Yellow Blue White Orange Bi-color (Typical) (Red/Green) Flush Prominent and Recessed 40mcd 10mcd 50mcd 12mcd 30mcd 6mcd 1,200mcd 100mcd 1,200mcd 160mcd 60mcd 10mcd 20/15mcd 10/8mcd The color is changed by reversing the polarity of the supply voltage. Forward Voltage 2.0V 2.2V 2.1V 3.8V 3.8V 2.0V 2.0V/2.2V Super Bright LED HE Red Green Yellow Blue White Orange Prominent and Recessed 1,000mcd 1,200mcd 2000mcd 1,600mcd 1,200mcd 10,000mcd Flush 700mcd 2,000mcd 8,000mcd 200mcd 350mcd 500mcd Forward Voltage 2.2V 3.5V 2.3V 3.3V 3.3V 2.2V Hyper Bright LED HE Red Green Yellow Orange Prominent and Recessed 3,700mcd 2,000mcd 1,200mcd 4,500mcd Flush 600mcd 350mcd 140mcd 400mcd Forward Voltage 2.2V 3.2V 2.0V 2.2V Luminous intensity will be reduced with lower operating current. Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy. The company reserves the right to change specifications without notice. * Customer to supply resistor for desired operating current. Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated. LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal. APEM www.apem.com 1 Q SERIES O6mm (.236") Panel Mount LED Indicators 7,00 [0,275] M6x0,5 3,50 0,138 8,75 0,344 2,0x0,5[0,078x0,02] 6,00 0,236 PINS 0,50 0,020 1,25 0,049 1,25 0,049 SOLDER LUG M6x0,5 3,50 0,138 8,75 0,344 17,10 0,673 23,10 0,909 9,50 0,374 11,00 0,433 REAR EPOXY PINS 3,50 0,138 8,75 0,344 17,10 0,673 7,00 [0,275] M6x0,5 7,00 [0,275] 0,50 0,020 1,25 0,049 1,25 0,049 3,50 0,138 8,75 0,344 12,00 0,472 3,50 0,138 8,75 0,344 12,00 0,472 11,00 0,433 9,50 0,374 RECESSED BEZEL SOLDER LUG 7,00 [0,275] M6x0,5 2,0x0,5[0,078x0,02] 2,25 0,089 8,75 0,344 18,75 0,738 6,00 0,236 2,25 0,089 8,75 0,344 SHORT BODY WIRES 7,00[0,275] 200,00+/-10 [7,874+/-0,393] 7,00 [0,275] 7,00 [0,275] 3,50 0,138 8,75 0,344 10,00 0,394 SHORT BODY PINS M6x0,5 18,98 0,747 16,60 0,654 3,50 0,138 8,75 0,344 10,00 0,394 200,0+/-10 [7,874+/-0,393] REAR EPOXY WIRES M6 x0,5 0,50 0,020 1,25 0,049 1,25 0,049 7,00 [0,275] WIRES 24,75 0,974 M6x0,5 200,0+/-10 [7,874+/-0,393] PINS M6x0,5 11,00 0,433 9,50 0,374 REAR EPOXY PINS 2,25 0,089 8,75 0,344 18,75 0,738 200,0+/-10 [7,874+/-0,393] 2,25 0,089 8,75 0,344 11,65 0,459 2 200,0+/-10 [7,874+/-0,393] 2,25 0,089 8,75 0,344 11,65 0,459 2,25 0,089 8,75 0,344 13,65 0,537 16,98 0,668 14,60 0,575 www.apem.com 0,50 0,020 1,25 0,049 1,25 0,049 M6 x0,5 18,10 0,713 16,60 0,654 SHORT BODY WIRES 7,00 [0,275] 1,25 0,049 1,25 0,049 M6x0,5 0,50 0,020 SHORT BODY PINS 7,00 [0,275] 7,00 [0,275] REAR EPOXY WIRES M6 x0,5 7,00 [0,275] 7,00 [0,275] WIRES M6x0,5 0,50 0,020 1,25 0,049 1,25 0,049 PROMINENT BEZEL 7,00 [0,275] Technical Drawings 2,25 0,089 8,75 0,345 13,65 0,537 M6x0,5 200,0+/-10 [7,874+/-0,393] APEM Q SERIES O6mm (.236") Panel Mount LED Indicators Technical Drawings 1,00 0,039 8,75 0,344 21,00 0,827 M6x0,5 200,0 +/-10 [7,874+/-0,393] APEM 200,0+/-10 [7,874+/-0,393] 1,00 ,039 8,75 0,344 15,90 0,626 1,00 0,039 8,75 0,344 13,90 0,547 11,00 0,433 9,50 0,374 www.apem.com M6 x0,5 16,60 0,654 18,10 0,713 SHORT BODY WIRES 7,00 [0,275] 0,50 0,020 1,25 0,049 1,25 0,049 7,00 [0,275] 7,00 [0,275] 1,00 0,039 8,75 0,344 13,90 0,547 REAR EPOXY PINS SHORT BODY PINS M6x0,5 11,00 0,433 9,50 0,374 WIRES REAR EPOXY WIRES M6 x0,5 1,00 0,039 8,75 0,344 21,00 0,827 6,00 0,236 M6x0,5 0,50 0,020 1,25 0,049 1,25 0,049 27,00 1,063 2,0x0,5 [0.078x0.02] 0,50 0,020 1,25 0,049 2,50 0,098 7,00 [0,275] 8,75 0,344 1,00 0,039 M6x0,5 PINS 7,00 [0,275] 7,00 [0,275] SOLDER LUG 7,00 [0,275] FLUSH BEZEL 1,00 0,039 8,75 0,344 15,90 0,626 M6x0,5 200,0 +/-10 [7,874 +/- 0,393] 3 Q SERIES O6mm (.236") Panel Mount LED Indicators Overview STANDARD OPTIONS The Q6 Series is available with a range of standard options, to specify your LED, simply choose one option from each column. An example is shown below. Q 6 P 1 B XX G 12 E SERIES MOUNTING HOLE BEZEL STYLE TERMINALS BEZEL FINISH TYPE OF ILLUMINATION LED COLOR VOLTAGE SEALING P = Prominent 1 = Solder Lug C = Bright Chrome XX = Fixed Light R = Red 02 = no resistor* (Blank) = Unsealed R = Recessed 2 = Pins B = Black Chrome G = Green 06 = 6VDC E = IP67 F = Flush 3 = Wires G = Satin Grey KK = Flashing Light (12V - 28VDC) YY = Bi-color B = Blue Q 6 = O6mm 4 = Rear epoxy Pins Y = Yellow W = White 12 = 12VDC 12A = 12VAC/DC 24 = 24VDC 5 = Rear epoxy Wires O = Orange 6 = Short body Pins HR = Hyper Bright Red 28 = 28VDC 7 = Short body Wires HG = Hyper Bright Green 28A = 28VAC/DC HY = Hyper Bright Yellow 24A = 24VAC/DC HO = Hyper Bright Orange SR = Super Bright Red SG = Super Bright Green SY = Super Bright Yellow SB = Super Bright Blue SW = Super Bright White Example Q6F3CXXB12E O6mm, flush bezel, wire terminals bright chrome finish, fixed light, blue, 12VDC LED, IP67 panel sealed SO = Super Bright Orange RG = Red/Green RY = Red/Yellow GY = Green/Yellow * Gold solder lug terminal denotes Anode (+), silver terminal denotes Cathode (-) * Standard wire length is 200mm, 24AWG UL 1061, red wire denotes Anode (+), black wire denotes Cathode (-) for other wire lengths consult APEM * For LEDs with alternative voltages consult APEM * Bi-color LEDs, by connecting the gold solder lug (+) one color is produced, by reversing the supply voltage another color is produced - Bi-colors are available up to 28V in DC only. * Take care when soldering to the terminals (recommended solder temperature 300C - 3 sec) * Short body options are only available up to 24VDC * Maximum panel thickness 7mm * = For resistorless versions (02) please refer to the forward voltage on page 1 4 www.apem.com APEM Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: Q6F1CXXB12 Q6F1CXXB24 Q6F1CXXG12 Q6F1CXXG24 Q6F1CXXR12 Q6F1CXXR24 Q6F1CXXW12 Q6F1CXXW24 Q6F1CXXY12 Q6F1CXXY24 Q6P1BXXR12 Q6P1CKKR12 Q6P1CXXB12 Q6P1CXXB24 Q6P1CXXG12 Q6P1CXXG24 Q6P1CXXR02 Q6P1CXXR12 Q6P1CXXR24 Q6P1CXXSB12 Q6P1CXXSG12 Q6P1CXXSR12 Q6P1CXXSW12 Q6P1CXXSY12 Q6P1CXXW12 Q6P1CXXW24 Q6P1CXXY12 Q6P1CXXY24 Q6P1GXXR12 Q6P3CXXR12 Q6R1CXXB12 Q6R1CXXB24 Q6R1CXXG12 Q6R1CXXG24 Q6R1CXXR12 Q6R1CXXR24 Q6R1CXXW12 Q6R1CXXW24 Q6R1CXXY12 Q6R1CXXY24 Q6P1CXXY12E Q6F1CXXG24E Q6P1CXXG24E Q6P1CXXR24E Q6P1CXXR12E Q6F1CXXY24E Q6F1CXXR24E Q6F1CXXR12E Q6F1CXXG12E Q6F1CXXY12E Q6P1CXXY24E Q6P1CXXG12E Q6F1BXXB12E Q6F1BXXB24E Q6F1BXXG12E Q6F1BXXG24E Q6F1BXXR12E Q6F1BXXR24E Q6F1BXXW12E Q6F1BXXW24E Q6F1BXXY12E Q6F1BXXY24E Q6F1CXXB12E Q6F1CXXB24E Q6F1CXXW12E Q6F1CXXW24E Q6P1BXXB12E Q6P1BXXB24E Q6P1BXXG12E Q6P1BXXG24E Q6P1BXXR12E Q6P1BXXR24E Q6P1BXXW12E Q6P1BXXW24E Q6P1BXXY12E Q6P1BXXY24E Q6P1CXXB12E Q6P1CXXB24E Q6P1CXXW12E Q6P1CXXW24E Q6R1BXXB12E Q6R1BXXB24E Q6R1BXXG12E Q6R1BXXG24E Q6R1BXXR12E Q6R1BXXR24E Q6R1BXXW12E Q6R1BXXW24E Q6R1BXXY12E Q6R1BXXY24E Q6R1CXXB12E Q6R1CXXB24E Q6R1CXXG12E Q6R1CXXG24E Q6R1CXXR12E Q6R1CXXR24E Q6R1CXXW12E Q6R1CXXW24E Q6R1CXXY12E Q6R1CXXY24E