AC Safety Certified High Voltage SMT High Capacitance High Temperature X2Y(R) Low ESL LICC Low ESL SMPS Stacks High Voltage Radials Planar Array Discoidal CapStrate(R) Custom Solutions CH EAnce /Rplia HSom Ro C Ceramic Capacitor Solutions Your Technology Partner The mission of the Johanson Companies is to translate our customer needs into quality electronic components, produced in factories that are models of excellence, supported by innovative service. With over 30 years of experience, Johanson Dielectrics provides both standard and custom technology solutions tailored to your specific electronic applications. Our standard product range includes High Voltage and AC Safety Capacitors providing solutions for Lighting, IT and Business Equipment designs. Our X2Y(R) Capacitor line provides advanced EMI filtering and IC decoupling solutions and our High Capacitance Tanceram(R) products provide the highest capacitance values in the smallest cases sizes. Customized solutions in the areas of High Temperature and High AC power ceramic capacitors are available to customers who require a partnered technology solution. Johanson Dielectrics design and manufacturing operations are located in Sylmar, California and Zhoaqing, PRC. Our quality minded management system utilizes continuous improvement programs focused on increased product reliability, manufacturing through-put, and product performance. Our broad experience, applications support, and responsive service enhance our ability to drive down your total cost of procurement and speed your time to market. HIGH FREQUENCY CERAMIC SOLUTIONS Johanson Technology Inc., Camarillo CA. Products include High Q Capacitors, Ceramic and Wirewound Chip Inductors, and a broad range of LTCC based RF IPCs such as Antennas, Filters, Baluns, Couplers, Matched Filter Baluns, etc. www.johansontechnology.com Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales are subject to the Johanson terms and conditions, including a limited warranty and remedies for nonconforming goods or defective goods. Download the Johanson terms and conditions from our website at http://www.johansondielectrics.com/purchasing-terms-and-conditions.html. www.johanson dielectrics.com 2 INDEX OF PRODUCTS SURFACE MOUNT CERAMIC CAPACITORS Ceramic Capacitor Prototyping Kits High Voltage Capacitors 250 - 6,000 VDC Safety Capacitors 250 VAC, Y2, Y3, Japan Standard Low Inductance X2Y(R) Capacitors Low Inductance Capacitors Chip Feedthru Filter Capacitors High Temperature - 200C Capacitors High Capacitance Tanceram(R) Capacitors SMT Multi-layer Ceramic Capacitors 10 - 200 VDC 4-5 6-7 8-9 10-13 14 15 16-17 18-19 20-21 LEADED CERAMIC CAPACITORS SMPS Stacked Capacitors, 125C & 200C versions Mini-SMPS Stacked Capacitors Maxi-CapTM SMPS Capacitors X2Y(R) Low ESL SMPS Stacked Capacitors Switch-mode Radial Leaded Capacitors High Voltage Radial Leaded Capacitors, 125C, 200C, 250C versions 22-23 24-25 26-27 28-29 30-31 32-33 PLANAR CAPACITORS & CUSTOM CERAMIC SOLUTIONS Planar Array Capacitors CapStrate(R) & Customer Ceramic Solutions Part Number, Dielectric, Packaging Specifications ON-LINE PRODUCTS 34-35 36-37 38-39 ON-LINE INFORMATION 200C Radial Leaded Capacitors Tin-Lead Termination Capacitors Polyterm(R) Termination Capacitors Large Size MLC Capacitors High Power AC Capacitors Packaging & Marking Environmental Compliance Policies Lead-Free Reflow Processing High Voltage PCB Design Capacitor Power Handling X2Y(R) Filter Eval. & PCB Design Guide www.johanson dielectrics.com 3 CERAMIC CAPACITOR ENGINEERING DESIGN KITS Johanson Dielectrics, Inc. offers a variety of multi-layer chip capacitor sample kits for proto-type design work. Each kit is grouped by type, size, or voltage and contains a selection of popular values and tolerances. The chips are individually packaged in labeled plastic compartments for easy access. The general range of kit contents is described below. Specific part number details may be found at www.johansondielectrics.com 0402 Ceramic Chip Capacitor Kit P/N: S-0402 1400 piece sample assortment of selected values from 1.0pF to 0.22F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0402 50 VDC - 6.3 VDC NP0, X7R,Y5V 1.0pF to 0.22F 50 pcs 1400 pcs 0603 Ceramic Chip Capacitor Kit P/N: S-0603 1400 piece sample assortment of selected values from 1.0pF to 0.22F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0603 50 VDC - 16 VDC NP0, X7R,Y5V 10pF to 0.22F 50 pcs 1400 pcs 0805 Ceramic Chip Capacitor Kit P/N: S-0805 1400 piece sample assortment of selected values from 1.0pF to 0.47F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 100 VDC - 16 VDC NP0, X7R 10pF to 0.47F 50 pcs 1400 pcs TANCERAM(R) HIGH CAPACITANCE Ceramic Chip Capacitor Kit P/N: S-TAN-X5R 500 piece sample assortment of selected values from 1.0F to 100F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0402, 0603, 0805 1206, 1210 25 VDC - 6.3 VDC X5R 1.0F - 100F 10 - 25 pcs 500 pcs 500 VDC Ceramic Chip Capacitor Kit P/N: S-500 400 piece sample assortment of selected values from 33pF to 0.1F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 - 1812 500 VDC NP0, X7R 33pF to 0.1F 10-20 pcs 400 pcs 1000 VDC Ceramic Chip Capacitor Kit P/N: S-1KV 400 piece sample assortment of selected values from 22pF to 0.1F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 - 2225 1000 VDC NP0, X7R 22pF to 0.1F 10-20 pcs 400 pcs Johanson may from time-time adjust actual kit contents based on design demand trends. Check the Johanson web site for design kit updates and kit content changes. 4 www.johanson dielectrics.com CERAMIC CAPACITOR ENGINEERING DESIGN KITS 2000 VDC Ceramic Chip Capacitor Kit P/N: S-2KV 300 piece sample assortment of selected values from 22pF to 0.022F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1206 - 2225 2000 VDC NP0, X7R 22pF to 0.022F 10-20 pcs 300 pcs X2/Y3 SAFETY CERTIFIED Ceramic Chip Capacitor Kit P/N: S-SY3 240 piece sample assortment of selected values from 10pF to 1500 pF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1808 3KV DC / 250 AC NP0, X7R 10pF to 1500 pF 20 pcs 240 pcs X1/Y2 SAFETY CERTIFIED Ceramic Chip Capacitor Kit P/N: S-SY2 200 piece sample assortment of selected values from 10pF to 2200 pF Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1808 - 2220 5KV DC / 250 AC NP0, X7R 10pF to 2200pF 20 pcs 200 pcs X2Y(R) EMI FILTER Capacitor Kit - 0402 Size P/N: S-X07CBK 600 piece sample assortment of selected values from 1.0pF to 0.01F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0402 10 - 50 VDC NP0, X7R 1.0pF to 0.01F 50 pcs 600 pcs X2Y(R) EMI FILTER Capacitor Kit - 0603 Size P/N: S-X14CBK 700 piece sample assortment of selected values from 1.0pF to 0.01F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0603 50 - 100 VDC NP0, X7R 1.0pF to 0.01F 50 pcs 700 pcs X2Y(R) POWER BYPASS Capacitor Kit - 0603 Size P/N: S-X14-PBP 300 piece sample assortment of selected values from 1.0nF to 1.0F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0603 6.3 - 100 VDC X7R, X5R 1.0nF to 1.0F 20 pcs 300 pcs X2Y(R) EMI FILTER Capacitor Kit - 0805 Size P/N: S-X15-EMI 300 piece sample assortment of selected values from 1.0pF to 0.01F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 0805 50 - 100 VDC NP0, X7R 1.0pF to 0.01F 20 pcs 300 pcs X2Y(R) DC MOTOR FILTER Capacitor Kit P/N: S-X2Y-MTR 300 piece sample assortment of selected values from 0.10F to 0.47F Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty 1206 - 1812 100 VDC X7R 0.10F to 0.47F 30 pcs 300 pcs Johanson may from time-time adjust actual kit contents based on design demand trends. Check the Johanson web site for design kit updates and kit content changes. www.johanson dielectrics.com 5 HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC These high voltage capacitors feature a special internal electrode design which reduces voltage concentrations by distributing voltage gradients throughout the entire capacitor. This unique design also affords increased capacitance values in a given case size and voltage rating. The capacitors are designed and manufactured to the general requirement of EIA198 and are subjected to a 100% electrical testing making them well suited for a wide variety of telecommunication, commercial, and industrial applications. APPLICATIONS * Analog & Digital Modems * LAN/WAN Interface * Lighting Ballast Circuits * Voltage Multipliers * DC-DC Converters * Back-lighting Inverters Polyterm(R) soft termination option for demanding environments & processes available on select parts, please contact the factory. CASE SIZE JDI /EIA R15/0805 R18/1206 S41/1210 R29/1808 CAPACITANCE SELECTION INCHES (MM) L W T E/B .080 .010 .050 .010 .055 Max. .020 .010 (2.03 .25) (1.27 .25) (1.40) (0.51.25) L W T E/B .125 .010 .062 .010 .067 Max. .020 .010 (3.17 .25) (1.57 .25) (1.70) (0.51.25) L W T E/B .125 .010 .095 .010 .080 Max. .020 .010 (3.18 .25) (2.41 .25) (2.03) (0.51.25) L W T E/B .185 .020 .080 .010 .085 Max. .020 .010 (4.70 .51) (2.03 .25) (2.16) (0.51.25) RATED VOLTAGE 250 VDC 500 VDC 630 VDC 1000 VDC 250 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 250 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 6000 VDC NP0 DIELECTRIC MINIMUM MAXIMUM 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF 680 560 390 1500 1200 1000 220 82 3900 2700 1800 560 220 4700 3300 2200 820 470 180 75 75 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF X7R DIELECTRIC MINIMUM MAXIMUM 1000 1000 1000 100 1000 1000 1000 100 100 100 1000 1000 1000 100 100 100 1000 1000 100 100 100 100 47 47 pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF pF 0.022 0.010 6800 2700 0.068 0.033 0.027 0.010 4700 1000 0.150 0.068 0.047 0.015 4700 1000 0.100 0.047 0.022 0.010 3300 1800 390 150 F F pF pF F F F F pF pF F F F F pF pF F F F F pF pF pF pF Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 ( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown. 6 www.johanson dielectrics.com HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC CASE SIZE JDI /EIA INCHES CAPACITANCE SELECTION (MM) S43 / 1812 S49 / 1825 S47 / 2220 S48 / 2225 L W T E/B .177 .012 .125 .010 .110 Max. .025 .015 (4.50 .30) (3.17 .25) (2.80) (0.64.38) L W T E/B .180 .010 .250 .010 .140 Max. .025 .015 (4.57 .25) (6.35 .25) (3.56) (0.64.38) L W T E/B .225 .015 .200 .015 .150 Max. .025 .015 (5.72 .38) (5.08 .38) (3.81) (0.64.38) L W T E/B .225 .010 .255 .015 .160 Max. .025 .015 (5.72 .25) (6.48 .38) (4.06) (0.64.38) NP0 DIELECTRIC MINIMUM MAXIMUM RATED VOLTAGE 250 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 6000 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 6000 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 6000 VDC 500 VDC 630 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 6000 VDC 100 pF 100 pF 10 pF 10 pF 10 pF 10 pF 10 pF 10 pF 100 pF 100 pF 10 pF 10 pF 10 pF 10 pF 10 pF 10 pF 1000 pF 1000 pF 100 pF 100 pF 10 pF 10 pF 10 pF 10 pF 1000 pF 1000 pF 100 pF 100 pF 10 pF 10 pF 10 pF 10 pF 8200 pF 6800 pF 5600 pF 1800 pF 1000 pF 390 pF 150 pF 150 pF 0.018 F 0.015 F 0.012 F 5600 pF 2200 pF 1200 pF 390 pF 390 pF 0.018 F 0.018 F 0.015 F 5600 pF 2700 pF 1500 pF 470 pF 470 pF 0.027 F 0.022 F 0.018 F 8200 pF 3300 pF 1800 pF 470 pF 470 pF X7R DIELECTRIC MINIMUM MAXIMUM 0.010 F 1000 pF 1000 pF 1000 pF 100 pF 100 pF 100 pF 100 pF 10 pF 0.01 F 0.01 F 1000 pF 100 pF 100 pF 100 pF 100 pF 100 pF 0.01 F 0.01 F 1000 pF 1000 pF 100 pF 100 pF 100 pF 100 pF 0.01 F 0.01 F 1000 pF 1000 pF 100 pF 100 pF 100 pF 100 pF 0.470 uF 0.330 uF 0.120 F 0.100 F 0.010 F 4700 pF 1200 pF 820 pF 330 pF 0.390 F 0.270 F 0.180 F 0.039 F 8200 pF 2200 pF 1500 pF 820 pF 0.470 F 0.270 F 0.120 F 0.039 F 0.010 F 2700 pF 1500 pF 820 pF 0.560 F 0.390 F 0.180 F 0.056 F 0.012 F 3300 pF 2700 pF 1200 pF Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 ( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown. ELECTRICAL CHARACTERISTICS W L T E/B Meets the standard NP0 & X7R dielectric specifications listed on page 39 DIELECTRIC WITHSTANDING VOLTAGE DWV = 1.5 X rated WVDC for ratings 500-999 WVDC, DWV = 1.2 X rated WVDC for ratings 1,000 WVDC NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath capacitors. For more information see JDI Tech Note "Surface Arc Season" HOW TO ORDER HIGH VOLTAGE SURFACE MOUNT P/N written: 202R18W102KV4E 202 R18 W 102 K V 4 E VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING R15 = 0805 R18 = 1206 R29 = 1808 S41 = 1210 S43 = 1812 S47 = 2220 S48 = 2225 S49 = 1825 N = NP0 W = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pF 104 = 0.10 F J = 5% K = 10% M = 20% V = NI Barrier with 100% Sn Plating (Matte) 4 = Unmarked 6 = EIA Code 501 631 102 202 302 402 502 602 = = = = = = = = 500 V 630 V 1000 V 2000 V 3000 V 4000 V 5000 V 6000 V F = Polyterm flexible termination T = SnPb www.johanson dielectrics.com E T = Embossed 7" = Punched 7" No code = bulk Tape specs. per EIA RS481 7 AC SAFETY CAPACITORS Johanson Dielectrics Type SC ceramic chip capacitors are designed for AC voltage surge and lightning protection in lineto-ground interface applications in computer networks, modem, facsimile and other equipment. Johanson's safety capacitor offering includes four different case sizes and NP0 and X7R dielectric materials. These devices are surface mount ready with barrier terminations and tape and reel packaging. Information on capacitor safety ratings and certification details may be found below. W L T SAFETY RATING X2/Y3 E/B Polyterm(R) soft termination option for demanding environments & processes available on select parts, please contact the factory. VOLTAGE RATING WITHSTANDING VOLTAGE IMPULSE VOLTAGE CASE SIZE JOHANSON ORDERING P/N 250 VAC 1,500 VAC 2,500 V 1808 302R29______V3E-****-SC STANDARDS: IEC 60384-14:2005, EN 60950 2001 * UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 * UL File E212609 * Semko 0026092-1 & 0003222-1 Y3 250 VAC 1,500 VAC 2,500 V 1812 302S43______V3E-****-SC 1808 502R29______V3E-****-SC STANDARDS: IEC 60384-14:2005, EN 60950:2001 CERTIFICATIONS: TUV Rheinland R 50227900 X1/Y2 250 VAC 1,500 VAC 5,000 V STANDARDS: IEC 60384-14:2005 * UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 / UL File E212609 Y2 250 VAC 1,500 VAC 5,000 V 2211 502R30______V3E-****-SC STANDARDS: IEC 60384-14:2005 * UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 * UL File: E212609 X1/Y2 250 VAC 1,500 VAC 5,000 V 2220 502S47______V3E-****-SC STANDARDS: IEC 60384-14:2005 * UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 * UL File: E212609 X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shock. 8 www.johanson dielectrics.com R29 / 1808 X2/Y3 S43 / 1812 Y3 R29 / 1808 X1/Y2 S43 / 1812 X1/Y2 R30 / 2211 Y2 S47 / 2220 X1/Y2 L W T E/B .185 .015 .080 .010 .085 Max. .020 .010 (4.70 .38) (2.03 .25) (2.16) (0.51.25) L W T E/B .175 .010 .125 .010 .115 Max. .025 .015 (4.45 .25) (3.17 .25) (2.92) (0.64.38) L W T E/B .185 .015 .080 .015 .085 Max. .012 .015 (4.80 .38) (2.03 .25) (2.16) (0.30.13) L W T E/B .175 .010 .125 .010 .115 Max. .025 .015 (4.45 .25) (3.17 .25) (2.92) (0.64.38) L W T E/B .225 .016 .110 .010 .115 Max. .020 .010 5.72 .40) (2.80 .25) (2.92) (0.51.25) L W T E/B .225 .015 .200 .015 .150 Max. .025 .015 (5.72 .38) (5.08 .38) (3.81) (0.64.38) 4700 pF 3300 pF 2700 pF 2200 pF 1800 pF 1500 pF 1200 pF 1000 pF 680 pF 560 pF 470 pF 330 pF 270 pF 220 pF 180 pF DIELECTRIC NP0 X7R HOW TO ORDER AC SAFETY CAPACITORS 502 150 pF 120 pF 100 pF 68 pF 56 pF 47 pF 33 pF 27 pF 22 pF 18 pF 15 pF (MM) 12 pF INCHES 10 pF SAFETY CERTIFIED 5 pF AC SAFETY CAPACITORS P/N written: 302R29W102MV3E-****-SC R29 W 102 M V 3 VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 302 = 250VAC [2500V Impulse] 502 = 250VAC [5000V Impulse] R29=1808 R30=2211 S43=1812 S47=2220 AC2=2220 N = NP0 W = X7R 1st two digits are significant; third digit denotes number of zeros, R = decimal. 102 = 1000 pF 104 = 0.10 F 5R0 = 5.0pF J = 5% K = 10% M = 20% V = NI Barrier with 100% Sn Plating (Matte) 3 = Required Safety Mark E = Embossed 7" F = Polyterm flexible termination www.johanson dielectrics.com E No code = bulk -****-SC TYPE SC = Safety Certified Tape specs. per EIA RS481 9 X2Y FILTER & DECOUPLING CAPACITORS (R) X2Y(R) filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors that are immune to temperature, voltage and aging performance differences. These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics, and can replace multiple capacitors and inductors saving board space and reducing assembly costs. 152 3000pF 1500pF 222 4400pF 2200pF 472 9400pF 4700pF .020F .010F .030F .015F .044F .022F .078F .039F .094F .047F 0.20F 0.10F 0.36F 0.18F 103 153 223 393 473 104 184 50 50 16 25 25 16 10 100 100 100 100 100 50 50 1206 (X18 NP0 X7R 1210 (X41) X7R 1410 (X44) X7R 1812 (X43) X7R 10 10 16 16 10 100 100 25 100 100 100 100 100 100 100 50 100 100 100 100 100 100 100 100 50 X7R NP0 10 10 X5R 0805 (X15) 16 50 100 100 100 100 100 100 100 100 50 X7R 1.0F 102 2000pF 1000pF 50 2.0F 940pF 470pF 471 50 105 440pF 220pF 221 50 0.94F 0.47F 200pF 100pF 101 50 X7R 474 47pF 94pF 470 50 0.80F 0.40F 33pF 66pF 330 50 404 27pF 54pF 270 50 0.68F 0.33F 22pF 44pF 220 50 334 10pF 20pF 100 50 0.44F 0.22F <20pF <10pF XRX 50 NP0 0603 (X14) Amplifier FIlter & Decoupling High Speed Data Filtering EMC I/O Filtering FPGA / ASIC / -P Decoupling DDR Memory Decoupling 50 Power Bypass (2 Y-Caps.) 0402 (X07) * * * * * NP0 EMI Filtering (1 Y-Cap.) SIZE One device for EMI suppression or decoupling Replace up to 7 components with one X2Y Differential and common mode attenuation Matched capacitance line to ground, both lines Low inductance due to cancellation effect CAP. CODE * * * * * APPLICATIONS 224 ADVANTAGES VOLTAGE RATINGS 6.3 = 6.3 VDC 10 = 10 VDC 16 = 16 VDC 25 = 25 VDC 50 = 50 VDC 100 = 100 VDC 500 = 500 VDC 50 50 25 10 100 100 100 100 100 100 500 100 500 16 100 500 100 Contact factory for part combinations not shown. Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G) Power Bypass capacitance is specified Power-to-Ground (A + B to G) Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 . HOW TO ORDER X2Y(R) CAPACITORS P/N written: 101X14W102MV4T 100 X14 W 102 M V 4 T VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING X07 = 0402 X14 = 0603 X15 = 0805 X18 = 1206 X41 = 1210 X44 = 1410 X43 = 1812 N = NP0 W = X7R X = X5R 6R3 100 160 250 500 101 501 = = = = = = = 6.3 V 10 V 16 V 25 V 50 V 100 V 500 V 1st two digits are signifiM = 20% V = NI Barrier with 100% cant; third digit denotes * D = 0.50 pF Tin Plating (Matte) number of zeros, R = *Values < 10 pF only F = Polyterm decimal. flexible termination 102 = 1000 pF 104 = 0.10 F T = SnPb 5R6 = 5.6pF 4 = Unmarked (Not available) X2Y(R) technology patents and registered trademark under license from X2Y ATTENUATORS, LLC 10 www.johanson dielectrics.com E = Embossed 7" T = Punched 7" No code = bulk Tape specs. per EIA RS481 X2Y FILTER & DECOUPLING CAPACITORS (R) Power Bypass S21 Power-to-Ground EMI Filtering S21 Signal-to-Ground Labeled capacitance values below follow the P/N order code (single Y cap value) Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value. 0.10 Approximate Impedance () 1.00 1.00 0.10 Approximate Impedance () 10.0 10.0 0.01 0.01 ELECTRICAL CHARACTERISTICS NP0 X7R X5R TEMPERATURE COEFFICIENT: 030ppm/C (-55 to +125C) 15% (-55 to +125C) 15% (-55 to +85C) DIELECTRIC STRENGTH: Vrated 100VDC: DWV = 2.5 X WVDC, 25C, 50mA max. Vrated = 500VDC: DWV = 1.5 X WVDC, 25C, 50mA max. WVDC 50 VDC: 2.5% max. WVDC = 25 VDC: 3.5% max. WVDC 50 VDC: 5% max. 0.1% max. WVDC = 10-16 VDC: 5.0% max. WVDC 25 VDC: 10% max. WVDC = 6.3 VDC: 10% max. C 0.047F: 1000 F or 100 G, whichever is less C> 0.047F: 500 F or 10 G, whichever is less DISSIPATION FACTOR: INSULATION RESISTANCE (MIN. @ 25C, WVDC) C > 100 pF; 1kHz 50Hz; 1.00.2 VRMS C 100 pF; 1Mhz 50kHz; 1.00.2 VRMS TEST CONDITIONS: OTHER: 1.0kHz50Hz @ 1.00.2 Vrms See page 39 for additional dielectric specifications. Equivalent Circuits Cross-sectional View A G1 G2 W Dimensional View G CB A CB B EB T W L G B EB CASE SIZE T 0402 (X07) IN MM 0603 (X14) IN MM 0805 (X15) IN MM 1206 (X18) IN MM 1210 (X41) IN MM L 1410 (X44) IN MM 1812 (X43) IN MM L 0.045 0.003 1.143 0.076 0.064 0.005 1.626 0.127 0.080 0.008 2.032 0.203 0.124 0.010 3.150 0.254 0.125 0.010 3.175 0.254 0.140 0.010 3.556 0.254 0.174 0.010 4.420 0.254 W 0.025 0.003 0.635 0.076 0.035 0.005 0.889 0.127 0.050 0.008 1.270 0.203 0.063 0.010 1.600 0.254 0.098 0.010 2.489 0.254 0.098 0.010 2.490 0.254 0.125 0.010 3.175 0.254 T 0.020 max 0.508 max 0.026 max 0.660 max 0.040 max 1.016 max 0.050 max 1.270 max 0.070 max 1.778 max 0.070 max 1.778 max 0.090 max 2.286 max EB 0.008 0.003 0.203 0.076 0.010 0.006 0.254 0.152 0.012 0.008 0.305 0.203 0.016 0.010 0.406 0.254 0.018 0.010 0.457 0.254 0.018 0.010 0.457 0.254 0.022 0.012 0.559 0.305 CB 0.012 0.003 0.305 0.076 0.018 0.004 0.457 0.102 0.022 0.005 0.559 0.127 0.040 0.005 1.016 0.127 0.045 0.005 1.143 0.127 0.045 0.005 1.143 0.127 0.045 0.005 1.143 0.127 www.johanson dielectrics.com 11 X2Y FILTER & DECOUPLING CAPACITORS (R) THE X2Y(R) DESIGN - A BALANCED, LOW ESL, "CAPACITOR CIRCUIT" The X2Y(R) capacitor design starts with standard 2 terminal MLC capacitor's opposing electrode sets, A & B, and adds a third electrode set (G) which surround each A & B electrode. The result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors in a compact, four-terminal SMT chip. EMI FILTERING: The X2Y(R) component contains two shunt or "line-to-ground" Y capacitors. Ultra-low ESL (equivalent series inductance) and tightly matched inductance of these capacitors provides unequaled high frequency Common-Mode noise filtering with low noise mode conversion. X2Y(R) components reduce EMI emissions far better than unbalanced discrete shunt capacitors or series inductive filters. Differential signal loss is determined by the cut off frequency of the single line-to-ground (Y) capacitor value of an X2Y(R). POWER BYPASS / DECOUPLING For Power Bypass applications, X2Ys(R) two "Y" capacitors are connected in parallel. This doubles the total capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized MLC capacitors enabling high-performance bypass networks with far fewer components and vias. Low ESL delivers improved High Frequency performance into the GHz range. GSM RFI ATTENUATION IN AUDIO & ANALOG GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse rate of 217Hz. These signals cause the GSM buzz heard in a wide range of audio products from headphones to concert hall PA systems or "silent" signal errors created in medical, industrial process control, and security applications. Testing was conducted where an 840MHz GSM handset signal was delivered to the inputs of three different amplifier test circuit configurations shown below whose outputs were measured on a HF spectrum analyzer. 1) No input filter, 2 discrete MLC 100nF power bypass caps. 2) 2 discrete MLC 1nF input filter, 2 discrete MLC 100nF power bypass caps. 3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap. X2Y configuration provided a nearly flat response above the ambient and up to 10 dB imrpoved rejection than the conventional MLCC configuration. AMPLIFIER INPUT FILTER EXAMPLE In this example, a single Johanson X2Y(R) component was used to filter noise at the input of a DC instrumentation amplifier. This reduced component count by 3-to-1 and costs by over 70% vs. conventional filter components that included 1% film Y-capacitors. Parameter X2Y(R) 10nF Discrete 10nF, 2 @ 220 pF Comments DC offset shift < 0.1 V < 0.1 V Referred to input Common mode rejection 91 dB 92 dB Source: Analog Devices, "A Designer's Guide to Instrumentation Amplifiers (2nd Edition)" by Charles Kitchin and Lew Counts 12 www.johanson dielectrics.com X2Y FILTER & DECOUPLING CAPACITORS (R) COMMON MODE CHOKE REPLACEMENT * Superior High Frequency Emissions Reduction * Smaller Sizes, Lighter Weight * No Current Limitation * Vibration Resistant * No Saturation Concerns See our website for a detailed application note with component test comparisons and circuit emissions measurements. Measured Common Mode Rejection PARALLEL CAPACITOR SOLUTION A common design practice is to parallel decade capacitance values to extend the high frequency performance of the filter network. This causes an unintended and often over-looked effect of anti-resonant peaks in the filter networks combined impedance. X2Y's very low mounted inductance allows designers to use a single, higher value part and completely avoid the antiresonance problem. The impedance graph on right shows the combined mounted impedance of a 1nF, 10nF & 100nF 0402 MLC in parrallel in RED. The MLC networks anti-resonance peaks are nearly 10 times the desired impedance. A 100nF and 47nF X2Y are plotted in BLUE and GREEN. (The total capacitance of X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this example.) The sigle X2Y is clearly superior to the three paralleled MLCs. X2Y HIGH PERFORMANCE POWER BYPASS - IMPROVE PERFORMANCE, REDUCE SPACE & VIAS Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network significantly out performs a 38 component MLC network. For more information see http://johansondielectrics.com/pdfs/JDI_X2Y_STXII.pdf www.johanson dielectrics.com 13 LOW INDUCTANCE CHIP CAPACITORS (LICC) LICC capacitors are specially designed to exhibit lower inductance by altering the aspect ratio of the terminations. The smaller current loop length results in Equivalent Series Inductance (ESL) that is typically 60% lower then standard MLCs of the same size. This ESL improvement is extremely advantageous in the high frequency power decoupling of high speed digital MPU, FPGA, DSP, etc.. FEATURES * Low Inductance * High Series Resonant Frequency * Sn-Pb and Polyterm(R) Termination Options MLC W * Surface Mount * Small Size * RoHS Compliant LICC L L CASE SIZE JDI EIA W AVAILABLE CAPACITANCE MM B14 0306 0816 B15 0508 1220 B18 0612 1632 DIELECTRIC 10nF 22nF 47nF 0.10uF 0.22uF X7R 25V 25V 25V 16V 6.3V 10V 25V X5R X7R 50V 50V 25V 0.47uF 1.00uF 2.2uF 10V 6.3V 6.3V 6.3V 16V 6.3V 6.3V 10V 10V 16V 6.3V X5R X7R 50V 50V 50V 50V 25V X5R 10V 4.7uF 10uF 6.3V 6.3V 6.3V 10V Please visit our website for complete specifications HOW TO ORDER LICC CAPACITORS 100 B14 X 224 M V 4 T VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING B14 = 0306 B15 = 0508 B18 = 0612 W = X7R X = X5R 4 = Unmarked E = Embossed 7" T = Punched 7" 6R3 100 160 250 500 14 P/N written: 101X14W102MV4T = = = = = 6.3 V 10 V 16 V 25 V 50 V 1st two digits are signifiM = 20% V = NI Barrier with 100% cant; third digit denotes Tin Plating (Matte) *Values < 10 pF only number of zeros T = SnPb 103 = 0.01 F (10NF) 104 = 0.10 F www.johanson dielectrics.com (Not available) No code = bulk Tape specs. per EIA RS481 CHIP FILTER / FEED-THRU CAPACITORS Our Feed-Thru Capacitors provide excellent EMI, I/O & Power Line filtering exhibiting much lower inductance than standard SMT capacitors which results in broader frequency response. These are Precious Metal Electrode (PME) products with higher current ratings than comparable Base Metal Electrode (BME) parts. FEATURES APPLICATIONS * * * * * DC Power Line EMI Filter * RF Immunity FIlter * RF Amplifier Gain Filter 1 Amp Current Rating Low Inductance, High SRF Surface Mount Non-polarized Sn-Pb and Polyterm(R) Options CASE SIZE JDI EIA AVAILABLE CAPACITANCE MM F14 0603 1608 F15 0805 2012 F18 1206 3216 DIELECTRIC 22pF NP0 50V 47pF 100pF 220pF 470pF 1.0nF 2.2nF 4.7nF 10nF 50V 50V 25V 50V 50V 50V 50V 100V 100V 100V 100V 25V 25V 25V 25V 25V 25V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V 50V X7R NP0 47nF 100nF 220nF 50V X7R NP0 22nF 100V X7R 100V 50V Please visit our website for complete specifications HOW TO ORDER CHIP FILTER / FEED-THRU P/N written: 250F14W103YV4E 250 F14 W 103 Y V 4 E VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING F14 = 0603 F15 = 0805 F18 = 1206 N = NP0 W = X7R V = Ni Barrier w/ 100% Sn Plating (150C) T = Ni Barrier w/ 95%Sn/5%Pb Plating (150C) 4 = Unmarked (Not available) 250 500 101 201 = = = = 25 V 50 V 100 V 200 V 1st two digits are signifiK = 10% cant; third digit denotes M = 20% number of zeros. Y = + 50% -20% 102 = 1000 pF 103 = 0.01 F 104 = 0.10 F www.johanson dielectrics.com E T =Embossed 7" =Punched 7" No code = bulk Tape specs. per EIA RS481 15 HIGH TEMPERATURE SURFACE MOUNT MLCCS 200C Johanson's high temperature MLCC series exhibit stable performance across an extended operating temperature range of -55C to +200C. Both Class I and Class II parts are available with DC voltage ratings of 50,100 and 200V satisfying a wide range of demanding applications. FEATURES APPLICATIONS * Stable 200C Operation * Deep Hole Drilling Electronics * Compact SMD Chip * High Temperature Modules * Polyterm(R) Termination Option * Industrial Equipment * Sn-Pb Termination Option * Automotive * Avionics ELECTRICAL CHARACTERISTICS NP0 X7R OPERATING RANGE: -55 to +200C -55 to +200C TEMPERATURE COEFFICIENT: 030ppm/C (-55to+125C) 015% (-55to+125C) 200C CAP. DROP: -0.5% max. -45% max. DISSIPATION FACTOR: 0.001 (0.1%) max. 0.020 (2.0%) max. AGING RATE: None <1.0% per decade INSULATION RESISTANCE: 25C IR >100G or 1000F (whichever 200C IR >1F or 100M is less) WITHSTANDING VOLTAGE: 2.5 X WVDC for ratings 200 VDC 1.5 X WVDC for ratings 201-500 VDC TEST CONDITIONS: C > 100 pF; 1kHz 50Hz; 1.00.2 VRMS C 100 pF; 1Mhz 50kHz; 1.00.2 VRMS MECHANICAL CHARACTERISTICS T07/0402 T14/0603 T15/0805 16 X7R Temp. Only X7R Temp. & Rated Voltage (100%) NP0 Temp. & Rated Voltage (100%) RATED VOLTAGE L W T E/B Inches .040 .004 .020 .004 .025 Max. .008.004 (mm) (1.02 .10) (0.51 .10) (0.64) (.20.10) L W T E/B Inches .063 .008 .032 .008 .035 Max. .010.005 (mm) (1.60 .20) (0.81 .20) (0.89) (.25.13) L W T E/B Inches .080 .010 .050 .010 .055 Max. .020.010 (mm) (2.03 .25) (1.27 .25) (1.40) (0.51.25 ) 25 VDC 50 VDC NP0 DIELECTRIC MINIMUM MAXIMUM 10 pF 270 pF 10 pF 120 pF X7R DIELECTRIC MINIMUM MAXIMUM 100 pF 4700 pF 100 pF 1500 pF 100 VDC 10 pF 82 pF 10 pF 390 pF 200 VDC 10 pF 50 pF 10 pF 100 pF 25 VDC 10 pF 820 pF 1000 pF 0.022 F 50 VDC 10 pF 330 pF 1000 pF 0.010 F 2200 pF 100 VDC 10 pF 220 pF 100 pF 200 VDC 10 pF 120 pF 100 pF 560 pF 25 VDC 100 pF 2200 pF 1000 pF 0.100 F 50 VDC 100 pF 1500 pF 1000 pF 0.033 F 100 VDC 100 pF 1000 pF 1000 pF 0.010 F 200 VDC 10 pF 680 pF 100 pF 2200 pF www.johanson dielectrics.com HIGH TEMPERATURE SURFACE MOUNT MLCCS 200C MECHANICAL CHARACTERISTICS T18/1206 T41/1210 T43/1812 T49/1825 T48/2225 W RATED VOLTAGE L W T E/B Inches .125 .010 .062 .010 .067 Max. .020.010 (mm) (3.17 .25) (1.57 .25) (1.70) (0.51.25 ) L W T E/B Inches .125 .010 .095 .010 .090 Max. .020.010 (mm) (3.18 .25) (2.41 .25) (2.03) (0.51.25 ) L W T E/B Inches .175 .010 .125 .010 .110 Max. .025.015 (mm) (4.45 .25) (3.17 .25) (2.80) (0.64.38) L W T E/B Inches .180 .010 .250 .010 .140 Max. .025.015 (mm) (4.57 .25) (6.35 .25) (3.56) (0.64.38) L W T E/B Inches .225 .010 .255 .015 .160 Max. .025.015 (mm) (5.72 .25) (6.48 .38) (4.06) (0.64.38) 25 VDC NP0 DIELECTRIC MINIMUM MAXIMUM 100 pF 6800 pF X7R DIELECTRIC MINIMUM MAXIMUM 1000 pF 0.220 F 50 VDC 100 pF 3300 pF 1000 pF 0.100 F 100 VDC 100 pF 2200 pF 1000 pF 0.022 F 200 VDC 100 pF 1500 pF 1000 pF 5600 pF 25 VDC 1000 pF 0.015 F 0.047 F 0.470 F 50 VDC 1000 pF 5600 pF 0.047 F 0.220 F 100 VDC 100 pF 4700 pF 0.047 F 0.056 F 200 VDC 100 pF 3300 pF 0.047 F 0.015 F 25 VDC 1000 pF 0.033 F 0.047 F 1.000 F 50 VDC 1000 pF 0.012 F 0.047 F 0.470 F 100 VDC 1000 pF 0.010 F 0.047 F 0.180 F 200 VDC 1000 pF 8200 pF 0.047 F 0.047 F 25 VDC 1000 pF 0.033 F 0.10 F 2.200 F 50 VDC 1000 pF 0.027 F 0.10 F 1.000 F 100 VDC 1000 pF 0.022 F 0.10 F 0.560 F 200 VDC 1000 pF 0.018 F 0.10 F 0.150 F 25 VDC 1000 pF 0.100 F 0.10 F 3.300 F 50 VDC 1000 pF 0.039 F 0.10 F 1.500 F 100 VDC 1000 pF 0.033 F 0.10 F 0.820 F 200 VDC 1000 pF 0.022 F 0.10 F 0.220 F L T E/B HOW TO ORDER 200C MLCCS 500 VOLTAGE 250 500 101 201 = = = = 25 V 50 V 100 V 200 V T14 W SIZE T07 = 0402 T14 = 0603 T15 = 0805 T18 = 1206 T41 = 1210 T43 = 1812 T49 = 1825 T48 = 2225 P/N written: 500T14W103KV4E 103 K V DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING N = NP0 W = X7R 1st two digits are significant; third digit denotes number of zeros. NP0 V = Ni Barrier w/ 100% Sn Plating (150C) 4 = Unmarked (Not available) 102 = 1000 pF 103 = 0.01 F 104 = 0.10 F J = 5% K = 10% X7R K = 10% M = 20% T = Ni Barrier w/ 95%Sn/5%Pb Plating (150C) E = Ni Barrier w/ 100% Sn Plating (180C) 4 E PACKING E = Embossed 7" T = Punched 7" No code = bulk Tape specs. per EIA RS481 P = Palladium Silver Pd-Ag (250C) www.johanson dielectrics.com 17 TANCERAM CHIP CAPACITORS (R) TANCERAM(R) chip capacitors can replace tantalum capacitors in many applications and offer several key advantages over traditional tantalums. Because TANCERAM(R) capacitors exhibit extremely low ESR, equivalent circuit performance can often be achieved using considerably lower capacitance values. Low DC leakage reduces current drain, extending the battery life of portable products. TANCERAM(R) high DC breakdown voltage ratings offer improved reliability and eliminate large voltage de-rating common when designing with tantalums. ADVANTAGES * Low ESR * Low DC Leakage * Higher Surge Voltage * Non-polarized Devices * Reduced CHIP Size * Improved Reliability * Higher Insulation Resistance * Higher Ripple Current APPLICATIONS * Switching Power Supply Smoothing (Input/Output) * Backlighting Inverters * DC/DC Converter Smoothing (Input/Output) * General Digital Circuits HOW TO ORDER TANCERAM(R) 18 Part number written: 100R15X106MV4E 100 R15 X 106 M V 4 E VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING 6R3 = 6.3 V 100 = 10 V 160 = 16 V 250 = 25 V 500 = 50 V 101 = 100 V See Chart W = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros. 105 = 1.00 F 476 = 47.0 F 107 = 100 F K = 10% M = 20% V = Nickel Barrier with 100% Tin Plating (Matte) 4 = Unmarked Code Type Reel E Plastic 7" T Paper 7" Tape specifications conform to EIA RS481 T = SnPb* (*available on select parts) www.johanson dielectrics.com DIELECTRIC TANCERAM CHIP CAPACITORS (R) W (X7R) W L T E/B X (X5R) CASE SIZE EIA / JDI CAPACITANCE SELECTION INCHES (mm) VDC 0402 R07 L W T EB .040 .004 .020 .004 .025 Max. .008 .004 (1.02 .10) (0.51 .10) (0.64) (0.20.10) 0603 R14 L W T EB .063 .008 .032 .008 .035 Max. .010.005 (1.60 .20) (0.81 .20) (0.89) (.25.13) 0805 R15 L W T EB .080 .010 .050 .010 .060 Max. .020.010 (2.03 .25) (1.27 .25) (1.52) (0.51.25 ) 1206 R18 L W T EB .125 .013 .062 .010 .070 Max. .020 +.015-0.01 (3.17 .35) (1.57 .25) (1.78) (0.51+.38-.25) 1210 S41 L W T EB .126 .016 .098 .012 .110 Max. .020 +.015-.010 (3.20 .40) (2.50 .30) (2.8) (0.51+.38-.25) 1812 S43 L W T EB .177 .016 .126 .015 .140 Max. .035 .020 (4.50 .40) (3.20 .38) (3.55) (0.89 0.51) 1.0 F 2.2 F 3.3 F 4.7 F 10 F 22 F 47 F 100 F W W W W W W W W 16 10 6.3 25 16 10 6.3 50 25 16 10 6.3 100 50 35 25 16 10 6.3 100 50 35 25 16 10 6.3 100 50 25 16 10 6.3 X X X X X X X X ELECTRICAL CHARACTERISTICS DIELECTRIC: X7R TEMPERATURE COEFFICIENT: DISSIPATION FACTOR: INSULATION RESISTANCE (MIN. @ 25C, WVDC) DIELECTRIC STRENGTH: TEST CONDITIONS: OTHER: X5R 15% (-55 to +125C) 15% (-55 to +85C) For 50 VDC: 5% max. For 35 VDC: 10% max. For 50 VDC: 5% max. For 35 VDC: 10% max. 100 F or 10 G, whichever is less 2.5 X WVDC, 25C, 50mA max. Capacitance values 10 F: 1.0kHz50Hz @ 1.00.2 Vrms Capacitance values > 10 F: 120Hz10Hz @ 0.5V0.1 Vrms See page 39 for additional dielectric specifications. www.johanson dielectrics.com 19 821 102 102 391 331 271 221 181 151 121 101 820 680 560 470 390 330 270 220 180 150 120 100 681 (1005) 821 .040 .004 .020 .004 .025 Max. .008 .004 (0.60 .03) (0.30 .03) (0.30 .03) (0.15.05) 681 0402 (0603) 561 .024 .001 .012 .001 .012 .001 .006 .002 471 L W T EB 0201 561 R07 L W T EB (mm) 471 R05 Inches 0R5 JDI AVAILABLE CAPACITANCE CODE XRX CASE SIZE Voltage SURFACE MOUNT MLCCS 10 - 200 VDC 25V 16V 10V (1.02 .10) (0.51 .10) (0.64) (0.20.10) 50V (1608) 200V 25V 16V 10V R14 L W T EB 0603 .063 .008 .032 .008 .035 Max. .010.005 (1.60 .20) (0.81 .20) (0.89) (.25.13) 100V (2012) 200V 50V 25V 16V R15 L W T EB 0805 .080 .010 .050 .010 .050 Max. .020.010 (2.03 .25) (1.27 .25) (1.27) (0.51.25 ) 100V (3216) 200V 50V 25V 16V R18 S41 L W T EB L W T EB 1206 .125 .010 .062 .010 .050 Max. .020 .010 1210 .125 .010 .095 .010 .065 Max. .020 .010 (3.17 .25) (1.57 .25) (1.27) (0.51 .25) 100V (3224) 200V 50V 25V (3.18 .25) (2.41 .25) (1.65) (0.51 .25) 100V (4532) 200V NP0 X7R X5R 50V W 25V L 16V T E/B 100V 50V HOW TO ORDER - SURFACE MOUNT MLCC 391 331 271 221 181 151 121 101 820 680 Part number written: 100R07W104KV4E 100 R 07 W 104 K V 4 E VOLTAGE SERIES/SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING R05 = 0201 R07 = 0402 R14 = 0603 R15 = 0805 R18 = 1206 S41 = 1210 S43 = 1812 N = NP0 W = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. V = Nickel Barrier with 100% Tin Plating (Matte) 3 = Special 4 = Unmarked 6 = EIA Code* T = SnPb *Not available on sizes 0402 E = Embossed 7" T = Punched 7" U = Embossed 13" R = Punched 13" No code = bulk 100 = 10 V DC 160 = 16 V DC 250 = 25 V DC 500 = 50 V DC 101 = 100 V DC 201 = 200 V DC 20 560 470 390 330 270 220 180 25V 150 (4.45 .25) (3.17 .25) (2.16) (0.64 .38) 120 .175 .010 .125 .010 .085 Max. .025 .015 100 1812 0R5 L W T EB XRX S43 5R6 = 5.6 pF 100 = 10 pF 102 = 1,000 pF 474 = 0.47 F * B = 0.10 pF * C = 0.25 pF * D = 0.50 pF *F=1% * G = 2% * J = 5% * K = 10% * M = 20% *Values < 10 pF only www.johanson dielectrics.com Tape specifications on page 48. Not all tape styles are available on all parts. 107 476 106 475 335 225 105 474 334 224 104 823 683 563 473 333 273 223 183 153 123 103 822 562 472 392 332 272 222 182 152 122 AVAILABLE CAPACITANCE CODE NP0 X7R X5R Voltage SURFACE MOUNT MLCCS 10 - 200 VDC CASE SIZE 25V 0201 R05 16V 10V 50V 25V 16V 0402 R07 10V 200V 100V 50V 25V 0603 R14 16V 200V 100V See Tanceram High Capacitance Series for values 1.0F 50V 25V 0805 R15 16V 200V 100V 50V 1206 R18 25V 200V 100V 50V 25V 1210 S41 16V 200V 100V 50V 1812 S43 107 476 106 475 335 225 105 474 334 224 104 823 683 563 473 333 273 223 183 153 123 103 822 562 472 392 332 272 222 182 152 122 25V ELECTRICAL CHARACTERISTICS Please refer to page 39 of the catalog or www.johansondielectrics.com www.johanson dielectrics.com 21 STACKED SMPS CERAMIC CAPACITORS Stacked Switch-Mode ceramic capacitors feature large capacitance values and exhibit low ESR (equivalent series resistance) and low ESL (equivalent series inductance) making them well suited for high power and high frequency applications where tantalum or aluminum electrolytic capacitors may not be suitable. The P-Series feature mechanical and pin-out configurations per DSCC 87106 and 88011 drawings while the E-Series feature mechanical and pin-out configurations more common in European design applications. KEY FEATURES * P-Series Approved to DSCC Drawings 87106 & 88011 MIL-PRF-49470 * New T-Series 200C for downhole tools and aircraft engine control applications. * E-Series Common European Lead Styles available to MIL-PRF-49470 requirements. * NP0 & X7R Dielectrics, 50 to 500 VDC Ratings * Low ESR / Low ESL, Ideal for SMPS Filtering Applications * Custom Sizes, Voltages, and Values Available D E B A CASE SIZE F .010" .002 .250" MIN .055" .010 STRAIGHT LEAD .100" MAX .025" MIN D .020" .002 C L-LEAD J-LEAD .100" TYP E .070".010 F .010" .002 .250" MIN .055" .010 .020" .002 .100" MAX .025" MIN C .100" TYP HOW TO ORDER STACKED .050"SMPS min .070".010 Part number written: 201P03W275KJ4H .050" min 201 P03 W 275 K J 4 H VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING See Chart N = NP0 B = BX W = X7R 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pF 102 = 1000 pF 103 = 0.01 F 105 = 1.00 F J = 5% K= 10% L = 15% M = 20% N = 30% Z = +80% -20% P = +100% -0% J = "J" Leads (formed in) K = "J" Leads with reduced height of .045" .010" L = "L" Leads (formed out) M = "L" Leads with reduced height of .045" .010" N = Straight Lead 4 = Standard 3 = Specified 500 101 201 501 22 .050" min .050" min B A = = = = 50 V 100 V 200 V 500 V www.johanson dielectrics.com T = Tape and Reel H = High Reliability testing per customer requirements S = Special Part STACKED SMPS CERAMIC CAPACITORS P-SERIES DSCC STYLE X7R CAPACITANCE / VOLTAGE SELECTION CASE SIZE CHIP LAYERS P05 P55 P04 P54 P03 P53 P01 P51 P02 P52 P06 P56 1 5 1 5 1 5 1 5 1 5 1 5 LEADS /SIDE X7R MAX CAPACITANCE (F) MECHANICAL SIZE RANGE (IN.) LENGTH (D) WIDTH (E) 3 0.275 0.300 4 0.425 0.440 10 1.075 0.500 20 2.075 0.500 15 1.535 0.870 20 2.075 1.350 TMAX (B) .185 .715 .185 .715 .185 .715 .185 .715 .185 .715 .185 .715 50V 3.0 15 9.0 45 28 140 50 250 75 370 160 800 100V 200V 500V 2.2 11 6.5 32 20 100 40 200 55 270 110 550 1.0 5.0 3.0 15 9.5 47 19 95 25 125 50 250 0.50 2.5 1.5 7.5 4.7 23 9.4 46 14 70 25 125 Please refer to our website for complete offering including NP0 & BX capacitance ranges. NEW 200C T-SERIES CAPACITANCE / VOLTAGE SELECTION CASE SIZE CHIP LAYERS T05 T55 T04 T54 T03 T53 1 5 1 5 1 5 LEADS /SIDE MAX CAPACITANCE (F) MECHANICAL SIZE RANGE (IN.) LENGTH (D) WIDTH (E) 3 0.275 0.300 4 0.425 0.440 10 1.075 0.500 TMAX (B) 50V 100V 200V .185 .715 .185 .715 .185 .715 1.20 5.60 2.70 15.0 10.0 47.0 0.68 3.30 1.50 8.20 5.60 27.0 0.33 1.50 0.82 3.90 2.70 12.0 Please refer to our website for complete offering including NP0 capacitance ranges. E-SERIES EUROPEAN STYLE X7R CAPACITANCE / VOLTAGE SELECTION CASE SIZE CHIP LAYERS E24 E54 E26 E56 E21 E51 E28 E58 E29 E59 1 4 1 4 1 4 1 4 1 4 LEADS /SIDE X7R MAX CAPACITANCE (F) MECHANICAL SIZE RANGE (MM) LENGTH (D) WIDTH (E) 3 8.7 9.2 5 13.6 14.9 6 16.6 21.6 14 38.2 12.0 14 40.6 24.0 TMAX (B) 50V 100V 200V 500V 3.8 14.8 3. 14.8 3.8 14.8 3.8 14.8 3.8 14.8 5.0 20 16 64 30 120 35 140 75 300 4.0 16 12 48 22 88 25 100 50 200 2.5 10 7.5 30 14 56 16 64 35 140 1.0 4.0 3.3 13 6.0 24 7.0 28 16 64 Please refer to our website for complete offering including NP0 & BX capacitance ranges. www.johanson dielectrics.com 23 MINI SWITCH-MODE CAPACITORS (R) JDI's Mini Switch-Mode(R) ceramic capacitors combine the advantages of high capacitance found in tantalum capacitors with very low ESR performance of ceramic capacitors. The "J" and "L" lead configurations replace 1825 and 2225 SMT chips to provide stress relief and prevent cracking due to thermal cycling or mechanical board flexing. Another plus of the J-lead style is that this configuration allows use of the same solder lands as the SMT chips. See the Stacked Switch-Mode section for larger values. See also the Technical Notes on soldering and handling and suggested solder lands. FEATURES * High Capacitance, Small SIze * Low ESR/ESL * Leadframe reduces thermal & mechanical stress due to board flexure and TCE mismatch APPLICATIONS * DC-DC Converters * Power Supply Input & Output Filters CAPACITANCE SELECTION 24 NP0 Max Capacitance (uF) X7R Max Capacitance (uF) SIZE CODE EIA CHIP SIZE 25V 50V 100V 200V 500V 25V 50V 100V 200V 500V P09 1825 0.056 0.047 0.039 0.027 0.018 1.5 1.2 0.75 0.56 0.27 P29 1825 0.11 0.094 0.078 0.054 0.036 3.0 2.4 1.5 1.1 0.54 P39 1825 0.16 0.14 0.11 0.081 0.054 4.5 3.6 2.2 1.6 0.81 P49 1825 0.22 0.18 0.15 0.10 0.07 6.0 4.8 3.0 2.2 1.0 P08 2225 0.068 0.056 0.047 0.033 0.027 2.7 2.2 1.5 1.2 0.39 P28 2225 0.13 0.11 0.094 0.066 0.054 5.4 4.4 3.0 2.4 0.78 P38 2225 0.20 0.16 0.14 0.10 0.081 8.1 6.6 4.5 3.6 1.1 P48 2225 0.27 0.22 0.18 0.13 0.10 10 8.8 6.0 4.8 1.5 www.johanson dielectrics.com MINI SWITCH-MODE CAPACITORS (R) CASE SIZE DIMENSIONS APPLICABLE TO ALL SIZES: IN. L W L W MM H .010 .070 1.78 C TYP. .100 2.54 P .015 .065 1.65 W h h h h c p L T T T T L W c p P08 P09 P28 c p P29 P38 c p P39 P48 P49 DIMENSIONS APPLICABLE TO SPECIFIC SIZES: IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM L MAX .280 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1 W MAX .270 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 T MAX .095 2.41 0.095 2.41 0.19 4.83 0.19 4.83 0.285 7.24 0.285 7.24 380 9.65 380 9.65 Note: J-Lead and L-Lead options are available on all sizes above ELECTRICAL CHARACTERISTICS DIELECTRIC: NP0 TEMPERATURE COEFFICIENT: 0 30ppm/C (-55 to +125C) 15% (-55 to +125C) 0.1% max. 2.5% max. None -2.5% per decade hour 1000 F or 100 G, whichever is less 500 F or 50 G, whichever is less DISSIPATION FACTOR: AGING INSULATION RESISTANCE (MIN. @ 25C, WVDC) X7R For 500V Ratings: 750VDC, 25C, 50mA max For 200V Ratings: 2xWVDC, 25C, 50mA max For 25-100V Ratings: 2.5xWVDC, 25C, 50mA max DIELECTRIC STRENGTH: 1kHz 50Hz;1.00.2 VRMS TEST CONDITIONS: See page 39 for additional dielectric specifications. OTHER: HOW TO ORDER - MINI SWITCHMODE(R) Part number written: 500P28W395KJ4U 500 P28 W 395 K J 4 U VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING See Chart N = NP0 W = X7R 1st two digits are significant; third digit denotes number of zeros. 103 = 0.01 F 105 = 1.0 F 106 = 10 uF J = 5% K = 10% M = 20% Z = +80% -20% J = "J" Leads (formed in) L = "L" Leads (formed out) 3 = Standard 4 = Unmarked U = Tape and Reel 16mm, 13" Reel NONE = Bulk pack H = High Reliability testing per customer requirements S = Special Part 250 500 101 201 501 = = = = = 25 V 50 V 100 V 200 V 500 V www.johanson dielectrics.com 25 BME MINI SWITCH-MODE CAPACITORS (R) This new series of miniature switchmode power supply filter capacitors uses BME (Base Metal Electrode) construction to achieve 300-400% capacitance increases and component size reductions compared to their PME (Precious Metal Electrode) counterparts per the comparison examples below. BME Size / Capacitance Comparison Technology Chips Volts Max. Cap. PME 1x 1825 50V 1.2F BME 1x 1812 50V 4.7F PME 2x 2225 100V 4.4F BME 2x 2220 100V 10F FEATURES APPLICATIONS * High Capacitance, Small SIze * DC-DC Converters * Low ESR/ESL * Power Supply Input & Output Filters * Leadframe reduces thermal & mechanical stress due to board flexure and TCE mismatch * High Capacitance Applications Where Increased Reliability is Required * Green / ROHS Compliant CAPACITANCE / VOLTAGE CASE SIZE / PART NUMBER CAPACITANCE RATING DC VOLTAGE RATING SIZE P0A 1812 SINGLE STACK 2.2 F 100V 101P0AW225MJ4U+RC 500P0AW475MJ4U+RC SIZE P07 2220 SINGLE STACK SIZE P2A 1812 DOUBLE STACK 4.7 F 50V 4.7 F 100V 101P07W475MJ4U+RC 101P2AW475MJ4U+RC 10 F 50V 500P07W106MJ4U+RC 500P2AW106MJ4U+RC 10 F 100V H 101P27W106MJ4U+RC 22 F 50V h1 500P27W226MJ4U+RC Dimensions Applicable to specific sizes: L MAX: W MAX: H MAX: H1 TYP. C TYP. P1 TYP. P2 0.02 IN. MM .059 .100 .020 .065 1.50 2.54 0.50 1.65 W IN. MM IN. MM IN. p1 MM 0.217 0.157 0.118 5.5 4.0 3.0 0.256 0.217 0.118 6.5 5.5 3.0 0.217 0.157 0.236 5.5 4.0 6.0 Dimensions Applicable to all sizes: IN. L p2 L p2 0.256 0.217 0.236 c W W H H h1 h1 p1 L p2 c W 26 SIZE P27 2220 DOUBLE STACK www.johanson dielectrics.com H h1 p1 c MM 6.5 5.5 6.0 BME MINI SWITCH-MODE CAPACITORS (R) TYPICAL APPLICATION: DC-DC CONVERTER INPUT & OUTPUT FILTERING Input Filter Capacitor Output Filter Capacitor Controller ELECTRICAL CHARACTERISTICS OPERATING RANGE: -55 to +125C TEMPERATURE COEFFICIENT: X7R, 15% DISSIPATION FACTOR: 0.020 (2.0%) max. AGING RATE: <2.5% per decade 25C IR >100G or 1000 F INSULATION RESISTANCE: whichever is less WITHSTANDING VOLTAGE: 2.5 X WVDC for 50 VDC 2.0 X WVDC for 100 VDC TEST CONDITIONS: 1kHz 50Hz; 1.00.2 VRMS, 25C HOW TO ORDER - BME MINI SWITCH-MODE(R) Part number written: 500P07W106MJ4U+RC 500 P07 W 106 M J 4 U +RC VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING ROHS CODE 500 = 50 V 101 = 100 V See Chart W = X7R 1st two digits are significant; third digit denotes number of zeros. 225 = 2.2 F 106 = 10 uF M = 20% J = "J" Leads (formed in) 4 = Unmarked U = Embossed Tape 13" Reel per EIA RS481 +RC = RoHS Compliant www.johanson dielectrics.com 27 X2Y SWITCH-MODE CERAMIC CAPACITORS (R) JDI's new X2Y(R) Technology Switch-Mode ceramic capacitors exhibit significantly lower ESL making them ideally suited for applications where high frequency filtering performance is critical. Lower ESL performance translates to significant size and weight reduction because lower capacitance values perform as well or better KEY FEATURES * Low ESR / Low ESL, Ideal for SMPS Filtering Applications * Same Package Size as DSCC Drawings 87106 & 88011 MIL-PRF-49470 * NP0 & X7R Dielectrics, 50 to 500 VDC Ratings * Custom Sizes, Voltages, and Values Available CAPACITANCE / VOLTAGE SELECTION Maximum X7R Capacitance Per Case Size (F) Rated DC Voltage 28 Y05 Y25 Y35 Y45 Y55 Y04 Y24 Y34 Y44 Y54 Y03 Y23 Y33 Y43 Y53 50V 2.7 5.0 8.0 11 14 8.3 17 25 33 41 29 58 87 116 145 100V 2.0 4.0 6.0 8.0 10 6.0 12 17 24 29 21 41 62 83 104 200V 0.9 1.8 2.7 4.0 5.0 2.8 5.5 8.3 11 14 9.8 20 29 39 49 500V 0.5 0.9 1.4 1.8 2.3 1.4 2.8 4.1 5.5 6.9 4.9 9.7 14 19 24 www.johanson dielectrics.com X2Y SWITCH-MODE CERAMIC CAPACITORS (R) A Signal (Power) G G A G B A G B + - + + - + + - + A G B B Return (Ground) Top View Contact the factory for additional connection options for dual signal line EMI filtering applications. CASE SIZE Y05 Y25 Y35 Y45 Y55 Y04 Y24 Y34 Y44 Y54 Y03 Y23 Y33 Y43 Y53 A .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 .120 .240 .360 .480 .650 B .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 .185 .305 .425 .545 .715 C .250 .400 .450 D- .224 .350 .950 D+ .275 .425 1.075 E .300 .440 .500 Pins 3 per side, configuration: a = 1, b = 1, g = 1 5 per side, configuration a = 1, b = 1, g = 3 10 per side, configuration a = 3, b = 3, g = 4 D E All dimensions are in Inches. Tolerances are maximum except: C = .025" D- = minimum, D+ = maximum, F = minimum B A .250" MIN .055" .010 D .100" MAX .025" MINStraight E 0.020" Min. B A .020" .002 C .100" TYP J-Lead L-Lead Lead 0.055" 0.010 .070".010 .050" min .050" min F 0.250" MIN 0.100" MAX 0.025" MIN .010" .002 C 0.020" .002 0.100" TYP HOW TO ORDER - X2Y(R) SMPS Part number written: 201Y03W475KJ4H .070" .010 .050" min .050" min 201 VOLTAGE 500 101 201 501 = = = = 50 V 100 V 200 V 500 V F .010" .002 Y03 W 475 M J SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING See Chart W = X7R 1st two digits are significant; third digit denotes number of zeros. M = 20% J = "J" Leads (formed in) L = "L" Leads (formed out) N = Straight Lead 4 = Standard 3 = Specified 104 = 0.10 F 105 = 1.00 F 476 = 47.0 F www.johanson dielectrics.com 4 H PACKING T = Tape and Reel H = High Reliability testing per customer requirements S = Special Part 29 SWITCH-MODE RADIAL LEADED CAPACITORS KEY FEATURES * Rated Working Voltages from 25 to 500 VDC * Rugged Epoxy Coating Offers Increased Protection * Hi-Rel Screened Versions Available * Custom Sizes, Voltages, and Values Available ADVANTAGES CASE SIZE H03 H04 H05 H06 30 * Power Supplies * Surge Protection * Voltage Multipliers * Industrial Control Circuits * Data Isolation * Custom Applications RATED VOLTAGE IN. (MM) W H T S LD .300 max. .300 max. .200 max. .200 nom. .020 nom. (7.62 max.) (7.62 max.) (5.08 max.) (5.08 nom.) (.510 nom.) W H T S LD .400 max. .400 max. .200 max. .200 nom. .020 nom. (10.2 max.) (10.2 max.) (5.08 max.) (5.08 nom.) (.510 nom.) W H T S LD .500 max. .500 max. .200 max. .400 nom. .025 nom. (12.7 max.) (12.7 max.) (5.08 max.) (10.2 nom.) (.635 nom.) W H T S LD .870 max. .600 max. .200 max. .790 nom. .032 nom. (22.1 max.) (15.2 max.) (5.08 max.) (20.1 nom.) (.813 nom.) NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.) VALUE CODE VALUE CODE 25 VDC .070 F 703 2.00 F 205 50 VDC .060 F 603 1.60 F 165 100 VDC .050 F 503 1.10 F 115 200 VDC .040 F 403 .730 F 734 500 VDC .020 F 203 .250 F 254 25 VDC .120 F 124 5.10 F 515 50 VDC .100 F 104 4.10 F 415 100 VDC .082 F 823 2.70 F 275 200 VDC .050 F 503 1.80 F 185 500 VDC .030 F 303 .670 F 674 25 VDC .240 F 244 8.70 F 875 50 VDC .200 F 204 7.20 F 725 100 VDC .180 F 184 4.80 F 485 200 VDC .110 F 114 3.30 F 335 500 VDC .070 F 703 1.10 F 115 25 VDC .750 F 754 22.0 F 226 50 VDC .620 F 624 17.0 F 176 100 VDC .560 F 564 13.0 F 136 200 VDC .360 F 364 8.00 F 805 500 VDC .240 F 244 2.90 F 295 www.johanson dielectrics.com SWITCH-MODE RADIAL LEADED CAPACITORS CASE SIZE IN. H07 H08 H09 H10 W RATED VOLTAGE (MM) W H T S LD 1.10 max. .600 max. .200 max. .980 nom. .032 nom. (27.9 max.) (15.2 max.) (5.08 max.) (24.9 nom.) (.813 nom.) W H T S LD 1.10 max. .600 max. .350 max. .980 nom. .032 nom. (27.9 max.) (15.2 max.) (8.89 max.) (24.9 nom.) (.813 nom.) W H T S LD .670 max. .540 max. .200 max. .575 nom. .025 nom. (17 max.) (13.7 max.) (5.08 max.) (14.6 nom.) (.635 nom.) W H T S LD .930 max. .720 max. .250 max. .800 nom. .032 nom. (23.6 max.) (18.3 max.) (6.35 max.) (20.3 nom.) (.813 nom.) NP0 CAPACITANCE (MAX.) VALUE CODE VALUE CODE 25 VDC .680 F 684 35.0 F 356 50 VDC .560 F 564 28.0 F 286 100 VDC .470 F 474 19.0 F 196 200 VDC .330 F 334 13.0 F 136 500 VDC .200 F 204 4.60 F 465 25 VDC 1.20 F 125 70.0 F 706 50 VDC 1.10 F 115 56.0 F 566 100 VDC .820 F 824 37.0 F 376 200 VDC .470 F 474 26.0 F 266 500 VDC .300 F 304 8.70 F 875 25 VDC .450 F 454 13.0 F 136 50 VDC .360 F 364 10.0 F 106 100 VDC .330 F 334 7.20 F 725 200 VDC .240 F 244 5.00 F 505 500 VDC .180 F 184 1.70 F 175 25 VDC 1.00 F 105 38.0 F 386 50 VDC .900 F 904 30.0 F 306 100 VDC .750 F 754 20.0 F 206 200 VDC .470 F 474 14.0 F 146 500 VDC .300 F 304 5.80 F 585 T NOTE: Lead lengths are typically 1.25" for orders in bulk packaging. Leads are typically 1.00" for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels. H Meniscus Height .050" Max S HOW TO ORDER SWITCH-MODE RADIALS 201 VOLTAGE 250 500 101 201 501 = = = = = X7R CAPACITANCE (MAX.) 25 V 50 V 100 V 200 V 500 V Part number written: 201H07W105KQ4 H07 W 105 K Q SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING Q = Leaded & Encapsulated 4 = Standard 3 = Specified T = Tape and Reel H = High Rel Testing per customer requirements S = Special Part See Chart N = NP0 W = X7R 1st two digits are significant; third digit denotes number of zeros. 101 = 100 pF 102 = 1000 pF 103 = 0.01 F 105 = 1.00 F J K M Z = = = = 5% 10% 20% +80% -20% www.johanson dielectrics.com 4 T 31 HIGH VOLTAGE RADIAL LEADED CAPACITORS KEY FEATURES * Rated Working Voltages from 25 to 5000 VDC * Rugged Epoxy Coating Offers Increased Protection * Compact MLC Designs Smaller Than Film or Disc * NEW 200C & 250C Versions Available for Oil & Geophysical Tool, Aircraft Engine Control Applications * DSCC Drawing & Other Screened Versions Available ADVANTAGES CASE SIZE IN. H42 H47 H51 H62 H66 32 * Power Supplies * Surge Protection * Voltage Multipliers * Industrial Control Circuits * Data Isolation * Custom Applications RATED VOLTAGE (MM) W H T S LD 0.250 Max 0.220 Max 0.270 Max 0.170 0.03 0.025 .002 (6.35 Max) (5.59 Max) (6.86 Max) (4.32 0.76) (0.64 0.05) W H T S LD 0.370 Max 0.300 Max 0.270 Max 0.275 0.03 0.025 .002 (9.40 Max) (7.62 Max) (6.86 Max) (6.99 0.76) (0.64 0.05) W H T S LD 0.470 Max 0.400 Max 0.320 Max 0.375 0.03 0.025 .002 (12.0 Max) (10.2 Max) (8.13 Max) (9.53 0.76) (0.64 0.05) W H T S LD 0.570 Max 0.500 Max 0.320 Max 0.475 0.03 0.025 .002 (14.5 Max) (12.7 Max) (8.13 Max) (12.1 0.76) (0.64 0.05) W H T S LD 0.670 Max 0.600 Max 0.320 Max 0.575 0.03 0.025 .002 (17.0 Max) (15.2 Max) (8.13 Max) (14.6 0.76) (0.64 0.05) 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.) VALUE CODE VALUE CODE 4700 pF 1500 pF 680 pF 330 pF 150 pF 100 pF .022 F 3300 pF 1500 pF 680 pF 330 pF 220 pF .056 F 4700 pF 3300 pF 1500 pF 1000 pF 470 pF .100 F .010 F 6800 pF 3300 pF 2200 pF 1000 pF .150 F .015 F .010 F 4700 pF 3300 pF 2200 pF 472 152 681 331 151 101 223 332 152 681 331 221 563 472 332 152 102 471 104 103 682 332 222 102 154 153 103 472 332 222 .150 F .055 F 9000 pF 2800 pF 630 pF 550 pF .480 F .170 F .025 F .011 F 1800 pF 940 pF 1.20 F .450 F .094 F .043 F .010 F 4900 pF 2.20 F .804 F .240 F .073 F .028 F .013 F 3.30 F 1.20 F .440 F 0.130 F .041 F .020 F 154 553 902 282 631 531 484 174 253 113 182 941 125 454 943 433 103 492 225 804 244 733 283 133 335 125 444 134 413 203 www.johanson dielectrics.com HIGH VOLTAGE RADIAL LEADED CAPACITORS CASE SIZE IN. H70 H72 H80 NP0 CAPACITANCE (MAX.) RATED VOLTAGE (MM) W H T S LD 0.770 Max 0.720 Max 0.320 Max 0.675 0.03 0.025 .002 (19.6 Max) (18.3 Max) (8.13 Max) (17.1 0.76) (0.64 0.05) W H T S LD 0.870 Max 0.750 Max 0.320 Max 0.775 0.03 0.025 .002 (22.1 Max) (19.1 Max) (8.13 Max) (19.7 0.76) (0.64 0.05) W H T S LD 1.450 Max 0.720 Max 0.320 Max 1.375 0.03 0.025 .002 (36.8 Max) (18.3 Max) (8.13 Max) (34.9 0.76) (.064 0.05) 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC 500 VDC 1000 VDC 2000 VDC 3000 VDC 4000 VDC 5000 VDC X7R CAPACITANCE (MAX.) VALUE CODE VALUE CODE .220 F .022 F .015 F 6800 pF 4700 pF 3300 pF .330 F .100 F .056 F .033 F .010 F 6800 pF .470 F .150 F .082 F .047 F .015 F .010 F 224 223 153 682 472 332 334 104 563 333 103 682 474 154 823 473 153 103 5.70 F 2.10 F .620 F .190 F .054 F .026 F 7.30 F 2.80 F .800 F .250 F .080 F .041 F 12.0 F 4.60 F 1.20 F .390 F .130 F .068 F 575 215 624 194 543 263 735 285 804 254 803 413 126 465 125 394 134 683 T-SERIES 200C & 250C Johanson also offers two different series of high temperature radial leaded capacitors for 200C and 250C. These components feature rugged premolded cases with Hi-Temp epoxy fill. The 200C line is offered in voltage ratings of 25V to 4KV and maximum capacitance loss of -0.5% in NP0 and -45% in X7R. The 250C line is offered in voltage ratings of 50V & 100V with maximum capacitance loss of -1.5% in NP0 and -55% in X7R. Please visit our website for complete component selection & specifications W H S APPLICATIONS * Geophysical Probes * Jet Engine Controls HOW TO ORDER HIGH VOLTAGE RADIALS VOLTAGE 501 102 202 302 402 502 = = = = = = 500 V 1000 V 2000 V 3000 V 4000 V 5000 V Meniscus Height .050" Max NOTE: Lead lengths are typically 1.25" for orders in bulk packaging. Leads are typically 1.00" for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels. * Oil Well Logging (Downhole) 102 T Part number written: 102H42W101KQ4 H42 W 101 K Q SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING See Chart N = NP0 W = X7R 1st two digits are significant; third digit denotes number of zeros. 102 = 1000 pF 103 = 0.01 F 105 = 1.00 F Q = Leaded & Encapsulated 4 = Standard 3 = Specified T = Tape and Reel H = High Rel Testing per customer requirements S = Special Part J K M Z = = 5% = 10% = 20% +80% -20% www.johanson dielectrics.com 4 33 PLANAR CAPACITOR ARRAYS FOR EMI FILTERING Johanson Dielectrics is the premier supplier of Planar Capacitor EMI Filter Arrays to the Filtered Connector Industry. Planar Capacitors are the fundamental building block for filtered connectors in Aerospace, Biomedical, Military, Satellite, Industrial and Communication electronics. Johanson offers high value Arrays in standard and custom solutions to fit your needs. CIRCULAR ARRAYS PHYSICAL LAYOUT DIELECTRIC MATERIAL AVAILABLE CAPACITANCE WORKING VOLTAGE DWV VOLTAGE MIL-1560 MIL-1554 MIL-1669 MIL-1651 MIL-1698 MIL-33702 MIL-AUDIO X7R & NP0 47 pF to 800 nF Up to 2,000 VDC Up to 3,000 VDC PHYSICAL LAYOUT DIELECTRIC MATERIAL AVAILABLE CAPACITANCE WORKING VOLTAGE DWV VOLTAGE RECTANGULAR ARRAYS (ARINC 404/600) AR-010 X7R 47 pF Up to Up to Through & to 1,330 2,000 AR-150 NP0 940 nF VDC VDC PHYSICAL LAYOUT DIELECTRIC MATERIAL AVAILABLE CAPACITANCE WORKING VOLTAGE DWV VOLTAGE X7R & NP0 47pF - 210nF 47pF - 100nF 47pF - 22.5nF 47pF - 3.0nF 47pF - 6.0nF 47pF - 120nF 47pF - 50nF 2,400 1,000 680 200 800 680 300 3,600 1,500 1,020 500 1,200 1,020 750 D-SUBMINATURE RECTANGULAR ARRAYS Full Size Mini-D Micro-D Nano-D Combo-D Power-D Special 34 www.johanson dielectrics.com PLANAR CAPACITOR ARRAYS FOR EMI FILTERING CUSTOM ARRAYS Johanson Dielectrics's design expertise and CNC manufacturing process enable broad custom array capability. Many shapes, configurations and geometries are possible. Share your requirements and we will create a solution! DISCOIDAL CAPACITORS JOHANSON Discoidal Feed-through Capacitors are the functional element in widely used EMI feed-through filters. This capacitor configuration offers very low impedance and inductance. Discoidal capacitors are ideal for by-pass, filtering, coupling, single line EMI/RFI suppression, and high frequency applications. * Capacitance values from 10 pF to 11.2 F * Test standards and procedures per MIL-STD-202 and MIL-C-123 * Voltage ratings from 50 to 3000 VDC and 50 to 240 VAC * Low ESR and ESL, non-polar designs Call us to discuss your special requirements! O.D. Ceramic Termination NOMINAL O.D. (IN.) 0.100 .005 0.150 .005 0.335 .005 0.345 .005 0.376 .005 0.643 .005 0.840 .005 Internal Electrodes I.D. DIELECTRIC MATERIAL X7R & NP0 AVAILABLE CAPACITANCE INSIDE DIAMETER (IN.) THICKNESS (IN.) RATED VOLTAGE 10 pF - 66 nF 10 pF - 200 nF 10 pF - 2.8 F 10 pF - 6.0 F 10 pF - 8.0 F 10 pF - 15 F 10 pF - 20 F 0.025 0.048 0.037 0.058 0.034 0.088 0.040 0.085 0.050 0.075 0.063 0.080 0.050 0.075 0.025 0.070 0.025 0.070 0.040 0.110 0.055 0.110 0.065 0.125 0.055 0.150 0.080 0.130 Up to 200 VDC Up to 200 VDC Up to 500 VDC Up to 750 VDC Up to 750 VDC Up to 750 VDC Up to 1000 VDC www.johanson dielectrics.com 35 CAPSTRATE CAPACITOR SUBSTRATES (R) Johanson CapStrate(R) products integrate bulk capacitance into a ceramic substrate eliminating large discrete capacitive components which saves critical space and simplifies the assembly process. Our design and manufacturing expertise in large format, custom geometries provides innovative solutions that economically solve a wide variety of your design challenges. Discrete Circuit CapStrate Circuit ADVANTAGES (R) * Major Size & Weight Reduction * Fewer Solder Joints * Lower Assembly Cost * Circuit Assembly Available KEY FEATURES * Integrated Capacitance in The Substrate * Rated Working Voltages from 50V to 5,000V * Temperature ranges: -55C to 125C (specials to 200C and 250C) * Compact Designs Utilizing Military Grade Ceramics * Custom Sizes, Values, and Voltages Available SIZE / CAPACITANCE CAPABILITY EXAMPLES SUBSTRATE SIZE CapStrate 4 CapStrate 3 CapStrate 1 CapStrate 2 CapStrate 6 LENGTH WIDTH THICK In 0.400 0.400 0.120 mm 10.2 10.2 3.1 In 0.450 1.00 0.120 mm 11.43 25.4 3.1 In 0.450 2.00 0.120 mm 11.4 50.8 3.1 In 0.800 1.50 0.120 mm 20.3 38.1 3.1 In 1.250 2.00 0.120 mm 31.8 50.8 3.1 Circular CapStrate(R) Capacitance Formula NP0 50V NP0 100V NP0 200V NP0 500V X7R 50V X7R 100V X7R 200V X7R 500V 0.22F 0.15F 0.12F 0.07F 9.0F 6.0F 3.0F 1.5F 0.70F 0.50F 0.39F 0.22F 28.0F 20.0F 9.0F 4.7F 1.40F 1.00F 0.75F 0.44F 50.0F 40.0F 18.0F 9.4F 2.00F 1.40F 1.00F 0.60F 75.0F 55.0F 25.0F 14.0F 4.00F 2.80F 2.00F 1.20F 150.0F 110.0F 50.0F 28.0F 1.3 -1.6 F / In2 0.9 -1.1 F / In2 0.7 -0.8 50 - 62 F 35 - 45 F 18 - 20 F 1.3 -1.6 F / In2 / In2 / In2 / In2 F / In2 9 -10 F / In2 This chart is intended to provide capability examples. Not all possibilities are shown and we invite application specific inquiries. Circular CapStrate(R) example lists available capacitance per area. 36 www.johanson dielectrics.com CUSTOM CAPACITOR SOLUTIONS Johanson's extensive experience in design and manufacture of large format, custom geometries allows us to develop unique and innovative solutions which successfully solve a wide variety of our customer's design challenges. We'll work pro actively with you to fully understand your requirements and recommend the best solution possible. KEY FEATURES * Custom shapes to fit specific requirements * Multiple capacitors in a single assembly * NP0/COG and X7R solutions from -55C to +125C * Multiple pin, lead-frame, and flying wire options * Bare ceramic, epoxy coated, potted solutions VARIABLE PITCH ASSEMBLIES Another custom approach is our variable pitch design. No longer are you limited to a vendor's standard catalogue offering or only square or rectangular custom designs. We let you become your own capacitor designer by not only telling us the desired capacitance and voltage, but also the size, shape, and location of leads! This process helps insure that the resulting capacitor satisfies every aspect of your design requirements. www.johanson dielectrics.com 37 CAPACITOR PACKAGING Johanson capacitors are available taped per EIA standard 481. Tape options include 7" and 13" diameter reels. Johanson uses high quality, dust free, punched 8mm paper tape and plastic embossed 8mm tape for thicker MLCCs. Quantity per reel ranges are listed in the tables below and are dependent on chip thickness. Feed Direction Embossed Tape .083 max. (2.1) Punched Tape 8mm Width; 4mm or 2mm Pitch .059+.004-0.0 (1.5+0.1-0.0) .157.004 (4.00.1) Sproket Holes .012.004 (0.30.1) .067.004 (1.70.1) .055 max.(1.2) .138.002 (3.50.05) .079.020 (2.00.5) Width .315.008 (8.00.2) Bo Ao .083.020 (210.5) 4E JV 00 Cover Tape .510.020 (130.5) .079.002 (2.00.05) Pitch = .157.004 (4.00.1) or .079.004 (2.00.1) Cover Tape 0 0R 50 1 7N N P/ 1.97 min. (50.0) Embossed Tape 99 99 0- 01 t# Lo 56 34 .# F0 .098 max. (2.5) 78 .012.004 (0.30.1) 12mm Width; 8mm or 4mm Pitch .059+.004-0.0 (1.5+0.1-0.0) Sproket Holes .157.004 (4.00.1) Punched Tape .067.004 (1.70.1) 26 S.O O1 .# M .O M Ao .220.004 (5.50.1) Bo 7.0.079 13.0.079 (1782.0) or (3302.0) Pitch = .314.004 (8.00.1) or .157.004 (4.00.1) .33+.059-0.0 or .488+.078-0.0 (8.4+1.5-0.0) (12.4+2.0-0.0) 7" DIAMETER REEL COMPONENT R05 / 0201 MLCC R07 / 0402 MLCC R14 / 0603 MLCC R15 / 0805 MLCC R18 / 1206 MLCC S41 / 1210 MLCC R29 / 1808 MLCC R30 / 2211 MLCC S43 / 1812 MLCC S47 / 2220 MLCC S49 / 1825 MLCC S48 / 2225 MLCC X07 / 0402 X2Y X14 / 0603 X2Y X15 / 0805 X2Y X18 / 1206 X2Y X41 / 1210 X2Y X44 / 1410 X2Y X43 / 1812 X2Y .079.002 (2.00.05) 13" DIAMETER REEL REEL QTY TAPE TYPE WIDTH / PITCH CODE REEL QTY TAPE TYPE 15000 10000 4000 4000 / 3000 4000 / 3000 2000 - 4000 2000 1000 - 2000 500 - 1000 250 - 1000 250 - 1000 250 - 1000 4000 4000 4000 3000 - 4000 2000 - 3000 1000 - 2000 1000 Paper Paper Paper 8mm/2mm 8mm/2mm 8mm/4mm 8mm/4mm 8mm/4mm 8mm/4mm 12mm/4mm 12mm/4mm 12mm/8mm 12mm/8mm 12mm/8mm 12mm/8mm 8mm/2mm 8mm/4mm 8mm/4mm 8mm/4mm 8mm/4mm 8mm/4mm 12mm/8mm T T T T/E T/E E E E E E E E T T E E E E E N/A N/A 10000 10000 10000 5000-10000 5000 - 8000 2000 - 5000 3000 - 5000 2000 - 5000 2000 - 4000 2000 - 4000 10000 10000 10000 10000 N/A N/A Paper Paper / Embossed Paper / Embossed Embossed Embossed Embossed Embossed Embossed Embossed Embossed Paper Paper Embossed Embossed Embossed Embossed Embossed Paper / Embossed Paper / Embossed Embossed Embossed Embossed Embossed Embossed Embossed Embossed Paper Paper Embossed Embossed WIDTH / PITCH CODE 8mm/4mm 8mm/4mm 8mm/4mm 8mm/4mm 12mm/4mm 12mm/4mm 12mm/8mm 12mm/8mm 12mm/8mm 12mm/8mm 8mm/2mm 8mm/4mm 8mm/4mm 8mm/4mm N/A N/A R R/U R/U U U U U U U U R R U U Actual reel quantities based on part thickness and tape type. Contact sales for reel quantities of specific part numbers. 38 Width .472.008 (12.00.2) www.johanson dielectrics.com ELECTRICAL CHARACTERISTICS PARAMETER TEMPERATURE COEFFICIENT: NP0 X7R 0 30 ppm/C -55 to +125C 15% -55 to +125C 0% 0% 0% -20% -20% -40% -40% -40% -60% -60% -60% -80% -55C -80% -55C -25C 0C 25C 50C 75C 100C 125C -25C 0C 25C 50C 75C 100C 0C 25C 50C 75C 100C 125C For Vrated 50 VDC, DF = 5% max For Vrated 25 VDC: DF = 10% max None 2.5% / decade hour 2.5 % / decade hour 1000F or 100G whichever is less @ 25C, WVDC 500F or 50G whichever is less @ 25C, WVDC 100F or 10G whichever is less @ 25C, WVDC For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25C, 50mA max. For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25C, 50mA max. For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25C, 50mA max. For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25C, 50mA max. TEST PARAMETERS: C > 100 pF; 1kHz 50Hz;1.00.2 VRMS 1kHz 50Hz;1.00.2 VRMS C 100 pF 1Mhz 50kHz; 1.00.2 VRMS Tanceram IR = 100 F or 10 G Tanceram DF for Vrated 50 VDC = 5% max. Tanceram DF for Vrated 25 VDC, DF = 10% max PART NUMBER BREAKDOWN - SURFACE MOUNT VOLTAGE -25C WVDC 50 VDC, DF = 2.5% max WVDC = 25 VDC, DF = 3.0% max WVDC = 16 VDC, DF = 3.5% max DIELECTRIC STRENGTH: 6R3 = 6.3 V DC 100 = 10 V DC 160 = 16 V DC 250 = 25 V DC 500 = 50 V DC 101 = 100 V DC 201 = 200 V DC 251 = 250 V DC 301 = 300 V DC 501 = 500 V DC 631 = 630 V DC 102 = 1000 V DC 202 = 2000 V DC 302 = 3000 V DC* 402 = 4000 V DC 502 = 5000 V DC* ACJ = 250 VAC * For Safety Caps with -****-SC P/N suffix only: 302 = 250VAC [2500V Impulse] 502 = 250VAC [5000V Impulse] -80% -55C 125C .001 (0.1%) max AGING: 502 -55 to +85C 20% -20% DISSIPATION FACTOR: NOTES: 15% 20% 20% INSULATION RESISTANCE: X5R 1kHz 50Hz; 0.50.2 VRMS Part number written: 502R29W102KV3E-****-SC W SERIES/SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING N = NP0 W = X7R X = X5R 1st two digits are significant; third digit denotes number of zeros, R = decimal. * B = 0.10 pF * C = 0.25 pF * D = 0.50 pF *F=1% * G = 2% * J = 5% * K = 10% * M = 20% * Y = +50 -20% * Z = +80 -20% V = Nickel Barrier with 100% Tin Plating (Matte) 3 = Special 4 = Unmarked 6 = EIA Code* F = Polyterm flexible termination *Not available on sizes 0402 E = Embossed 7" T = Punched 7" U = Embossed 13" R = Punched 13" = = = = = = = ARRAY LICC F-T FILTER MLCC MLCC HI TEMP MLCC X2Y 5R6 = 5.6 pF 100 = 10 pF 102 = 1,000 pF 474 = 0.47 F 475 = 4.7 F 106 = 10 F _05=0201 _07=0402 _14=0603 _15=0805 _18=1206 _41=1210 _29=1808 _30=2211 _43=1812 _44=1410 _47=2220 _49=1825 _48=2225 K 3 R 29 A_ _ B_ _ F_ _ R_ _ S_ _ T_ _ X_ _ 102 DWV = 2.5 X WVDC, 25C, 50mA max. *Values < 10 pF only V G = Gold E No code = bulk pack Tape specifications conform to EIA RS481 T = SnPb P = PdAg Not all tape styles are available on all parts. -****- SC PART NUMBER MODIFIER Used on select parts such as Safety Certified or for customer specific requirements. PLEASE NOTE: Not all combinations of JDI P/Ns are valid. Please refer to the "How to Order" detail section of the specific product or contact your Sales Representative if you need assistance. www.johanson dielectrics.com 39 Your Technology Partner High Voltage AC Safety X2Y High Capacitance High Temperature AC Power Feedthru Filter Low ESL SMPS Radial Leaded Planar Arrays Custom Solutions EUROPE: UNITED STATES: HONG KONG: JOHANSON EUROPE, LTD. Flackwell Heath, Bucks, England HP10 9NR TEL +44 1628 531154 * FAX +44 1628 532703 eurosales@johansondielectrics.com HEADQUARTERS 15191 Bledsoe St., Sylmar, California 91342 TEL (818) 364 9800 * FAX (818) 364 6100 http://www.johansondielectrics.com JOHANSON HONG KONG, LTD. Unit E, 11/F., Phase 1 Kaiser Estate 41 Man Yue St., Hunghom Kowloon, Hong Kong TEL +852 2334 6310 * FAX +852 2334 8858 asiasales@johansondielectrics.com (c) 2015 Publication JD072115