RoHS/REACH
Compliance
AC Safety Certified
High Voltage SMT
High Capacitance
High Temperature
X2Y® Low ESL
LICC Low ESL
SMPS Stacks
High Voltage Radials
Planar Array
Discoidal
CapStrate®
Custom Solutions
Ceramic
Capacitor Solutions
The mission of the Johanson Companies is to
translate our customer needs into quality electronic
components, produced in factories that are models
of excellence, supported by innovative service. With
over 30 years of experience, Johanson Dielectrics
provides both standard and custom technology solu-
tions tailored to your specific electronic applications.
Our standard product range includes High Voltage
and AC Safety Capacitors providing solutions for
Lighting, IT and Business Equipment designs. Our
X2Y® Capacitor line provides advanced EMI fil-
tering and IC decoupling solutions and our High
Capacitance Tanceram® products provide the highest
capacitance values in the smallest cases sizes.
Customized solutions in the areas of High Tem-
perature and High AC power ceramic capacitors are
available to customers who require a partnered tech-
nology solution.
Johanson Dielectrics design and manufacturing
operations are located in Sylmar, California and
Zhoaqing, PRC. Our quality minded management
system utilizes continuous improvement programs
focused on increased product reliability, manufac-
turing through-put, and product performance. Our
broad experience, applications support, and respon-
sive service enhance our ability to drive down your
total cost of procurement and speed your time to
market.
Your Technology Partner
Johanson Dielectrics, Inc. reserves the right to make design and price changes without notice. All sales
are subject to the Johanson terms and conditions, including a limited warranty and remedies for non-
conforming goods or defective goods. Download the Johanson terms and conditions from our website at
http://www.johansondielectrics.com/purchasing-terms-and-conditions.html.
www.johansondielectrics.com
HIGH FREQUENCY CERAMIC SOLUTIONS
Johanson Technology Inc., Camarillo CA. Products
include High Q Capacitors, Ceramic and Wire-
wound Chip Inductors, and a broad range of LTCC
based RF IPCs such as Antennas, Filters, Baluns,
Couplers, Matched Filter Baluns, etc.
www.johansontechnology.com
2
3
www.johansondielectrics.com
INDEX OF PRODUCTS
SURFACE MOUNT CERAMIC CAPACITORS
Ceramic Capacitor Prototyping Kits 4-5
High Voltage Capacitors 250 - 6,000 VDC 6-7
Safety Capacitors 250 VAC, Y2, Y3, Japan Standard 8-9
Low Inductance X2Y® Capacitors 10-13
Low Inductance Capacitors 14
Chip Feedthru Filter Capacitors 15
High Temperature - 200°C Capacitors 16-17
High Capacitance Tanceram® Capacitors 18-19
SMT Multi-layer Ceramic Capacitors 10 - 200 VDC 20-21
LEADED CERAMIC CAPACITORS
SMPS Stacked Capacitors, 125°C & 200°C versions 22-23
Mini-SMPS Stacked Capacitors 24-25
Maxi-CapTM SMPS Capacitors 26-27
X2Y® Low ESL SMPS Stacked Capacitors 28-29
Switch-mode Radial Leaded Capacitors 30-31
High Voltage Radial Leaded Capacitors, 125°C, 200°C, 250°C versions 32-33
PLANAR CAPACITORS & CUSTOM CERAMIC SOLUTIONS
Planar Array Capacitors 34-35
CapStrate® & Customer Ceramic Solutions 36-37
Part Number, Dielectric, Packaging Specifications 38-39
ON-LINE PRODUCTS ON-LINE INFORMATION
200°C Radial Leaded Capacitors Packaging & Marking
Tin-Lead Termination Capacitors Environmental Compliance Policies
Polyterm® Termination Capacitors Lead-Free Reflow Processing
Large Size MLC Capacitors High Voltage PCB Design
High Power AC Capacitors Capacitor Power Handling
X2Y® Filter Eval. & PCB Design Guide
4
www.johansondielectrics.com
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
Johanson Dielectrics, Inc. offers a variety of multi-layer chip capacitor
sample kits for proto-type design work. Each kit is grouped by type,
size, or voltage and contains a selection of popular values and
tolerances. The chips are individually packaged in labeled plastic
compartments for easy access. The general range of kit contents
is described below. Specific part number details may be found at
www.johansondielectrics.com
0402 Ceramic Chip Capacitor Kit P/N: S-0402
1400 piece sample assortment of selected values from 1.0pF to 0.22µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0402 50 VDC - 6.3 VDC NP0, X7R,Y5V 1.0pF to 0.22µF 50 pcs 1400 pcs
0603 Ceramic Chip Capacitor Kit P/N: S-0603
1400 piece sample assortment of selected values from 1.0pF to 0.22µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0603 50 VDC - 16 VDC NP0, X7R,Y5V 10pF to 0.22µF 50 pcs 1400 pcs
0805 Ceramic Chip Capacitor Kit P/N: S-0805
1400 piece sample assortment of selected values from 1.0pF to 0.47µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0805 100 VDC - 16 VDC NP0, X7R 10pF to 0.47µF 50 pcs 1400 pcs
TANCERAM® HIGH CAPACITANCE Ceramic Chip Capacitor Kit P/N: S-TAN-X5R
500 piece sample assortment of selected values from 1.0µF to 100µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0402, 0603, 0805
1206, 1210 25 VDC - 6.3 VDC X5R 1.0µF - 100µF 10 - 25 pcs 500 pcs
500 VDC Ceramic Chip Capacitor Kit P/N: S-500
400 piece sample assortment of selected values from 33pF to 0.1µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0805 - 1812 500 VDC NP0, X7R 33pF to 0.1µF 10-20 pcs 400 pcs
1000 VDC Ceramic Chip Capacitor Kit P/N: S-1KV
400 piece sample assortment of selected values from 22pF to 0.1µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0805 - 2225 1000 VDC NP0, X7R 22pF to 0.1µF 10-20 pcs 400 pcs
5
www.johansondielectrics.com
CERAMIC CAPACITOR ENGINEERING DESIGN KITS
2000 VDC Ceramic Chip Capacitor Kit P/N: S-2KV
300 piece sample assortment of selected values from 22pF to 0.022µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
1206 - 2225 2000 VDC NP0, X7R 22pF to 0.022µF 10-20 pcs 300 pcs
X2/Y3 SAFETY CERTIFIED Ceramic Chip Capacitor Kit P/N: S-SY3
240 piece sample assortment of selected values from 10pF to 1500 pF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
1808 3KV DC / 250 AC NP0, X7R 10pF to 1500 pF 20 pcs 240 pcs
X1/Y2 SAFETY CERTIFIED Ceramic Chip Capacitor Kit P/N: S-SY2
200 piece sample assortment of selected values from 10pF to 2200 pF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
1808 - 2220 5KV DC / 250 AC NP0, X7R 10pF to 2200pF 20 pcs 200 pcs
X2Y® EMI FILTER Capacitor Kit - 0402 Size P/N: S-X07CBK
600 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0402 10 - 50 VDC NP0, X7R 1.0pF to 0.01µF 50 pcs 600 pcs
X2Y® EMI FILTER Capacitor Kit - 0603 Size P/N: S-X14CBK
700 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0603 50 - 100 VDC NP0, X7R 1.0pF to 0.01µF 50 pcs 700 pcs
X2Y® EMI FILTER Capacitor Kit - 0805 Size P/N: S-X15-EMI
300 piece sample assortment of selected values from 1.0pF to 0.01µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0805 50 - 100 VDC NP0, X7R 1.0pF to 0.01µF 20 pcs 300 pcs
X2Y® POWER BYPASS Capacitor Kit - 0603 Size P/N: S-X14-PBP
300 piece sample assortment of selected values from 1.0nF to 1.0µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
0603 6.3 - 100 VDC X7R, X5R 1.0nF to 1.0µF 20 pcs 300 pcs
X2Y® DC MOTOR FILTER Capacitor Kit P/N: S-X2Y-MTR
300 piece sample assortment of selected values from 0.10µF to 0.47µF
Chip Size Voltage Rating Dielectric Capacitanc Range Qty / Value Total Qty
1206 - 1812 100 VDC X7R 0.10µF to 0.47µF 30 pcs 300 pcs
Johanson may from time-time adjust actual kit contents based on design demand trends.
Check the Johanson web site for design kit updates and kit content changes.
6
www.johansondielectrics.com
CASE SIZE CAPACITANCE SELECTION
JDI /EIA
RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
INCHES (MM) MINIMUM MAXIMUM MINIMUM MAXIMUM
R15/0805 L
W
T
E/B
.080 ±.010
.050 ±.010
.055 Max.
.020 ±.010
(2.03 ±.25)
(1.27 ±.25)
(1.40)
(0.51±.25)
250 VDC
- - 1000 pF 0.022 µF
500 VDC
10 pF 680 pF 1000 pF 0.010 µF
630 VDC
10 pF 560 pF 1000 pF 6800 pF
1000 VDC
10 pF 390 pF 100 pF 2700 pF
R18/1206 L
W
T
E/B
.125 ±.010
.062 ±.010
.067 Max.
.020 ±.010
(3.17 ±. 25)
(1.57 ±.25)
(1.70)
(0.51±.25)
250 VDC
- - 1000 pF 0.068 µF
500 VDC
10 pF 1500 pF 1000 pF 0.033 µF
630 VDC
10 pF 1200 pF 1000 pF 0.027 µF
1000 VDC
10 pF 1000 pF 100 pF 0.010 µF
2000 VDC
10 pF 220 pF 100 pF 4700 pF
3000 VDC
10 pF 82 pF 100 pF 1000 pF
S41/1210 L
W
T
E/B
.125 ±.010
.095 ±.010
.080 Max.
.020 ±.010
(3.18 ±. 25)
(2.41 ±.25)
(2.03)
(0.51±.25)
250 VDC
- - 1000 pF 0.150 µF
500 VDC
10 pF 3900 pF 1000 pF 0.068 µF
630 VDC
10 pF 2700 pF 1000 pF 0.047 µF
1000 VDC
10 pF 1800 pF 100 pF 0.015 µF
2000 VDC
10 pF 560 pF 100 pF 4700 pF
3000 VDC
10 pF 220 pF 100 pF 1000 pF
R29/1808
L
W
T
E/B
.185 ±.0 20
.080 ±.010
.085 Max.
.020 ±.010
(4.70 ±.51)
(2.03 ±.25)
(2.16 )
(0.51±.25)
500 VDC
10 pF 4700 pF 1000 pF 0.100 µF
630 VDC
10 pF 3300 pF 1000 pF 0.047 µF
1000 VDC
1.0 pF 2200 pF 100 pF 0.022 µF
2000 VDC
1.0 pF 820 pF 100 pF 0.010 µF
3000 VDC
1.0 pF 470 pF 100 pF 3300 pF
4000 VDC
1.0 pF 180 pF 100 pF 1800 pF
5000 VDC
1.0 pF 75 pF 47 pF 390 pF
6000 VDC
1.0 pF 75 pF 47 pF 150 pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
These high voltage capacitors feature a special internal electrode
design which reduces voltage concentrations by distributing
voltage gradients throughout the entire capacitor.
This unique design also affords increased capacitance values in
a given case size and voltage rating. The capacitors are designed
and manufactured to the general requirement of EIA198 and
are subjected to a 100% electrical testing making them well
suited for a wide variety of telecommunication, commercial, and
industrial applications.
APPLICATIONS
• Analog & Digital Modems • LAN/WAN Interface
• Lighting Ballast Circuits • Voltage Multipliers
• DC-DC Converters • Back-lighting Inverters
Polyterm
®
soft termination option for demanding environments &
processes available on select parts, please contact the factory.
7
www.johansondielectrics.com
CASE SIZE CAPACITANCE SELECTION
JDI /EIA RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
INCHES (MM) MINIMUM MAXIMUM MINIMUM MAXIMUM
S43 / 1812
L
W
T
E/B
.177 ±.012
.125 ±.010
.110 M a x.
.025 ±.015
(4.50 ±.30)
(3.17 ±. 25)
(2.80)
(0.64±.38)
250 VDC
- - 0.010 µF 0.470 uF
500 VDC
100 pF 8200 pF 1000 pF 0.330 uF
630 VDC
100 pF 6800 pF 1000 pF 0.120 µF
1000 VDC
10 pF 5600 pF 1000 pF 0.100 µF
2000 VDC
10 pF 1800 pF 100 pF 0.010 µF
3000 VDC
10 pF 1000 pF 100 pF 4700 pF
4000 VDC
10 pF 390 pF 100 pF 1200 pF
5000 VDC
10 pF 150 pF 100 pF 820 pF
6000 VDC
10 pF 150 pF 10 pF 330 pF
S49 / 1825
L
W
T
E/B
.180 ±.010
.250 ±.010
.14 0 M a x.
.025 ±.015
(4.57 ±.25)
(6.35 ±.25)
(3.56)
(0.64±.38)
500 VDC
100 pF 0.018 µF 0.01 µF 0.390 µF
630 VDC
100 pF 0.015 µF 0.01 µF 0.270 µF
1000 VDC
10 pF 0.012 µF 1000 pF 0.180 µF
2000 VDC
10 pF 5600 pF 100 pF 0.039 µF
3000 VDC
10 pF 2200 pF 100 pF 8200 pF
4000 VDC
10 pF 1200 pF 100 pF 2200 pF
5000 VDC
10 pF 390 pF 100 pF 1500 pF
6000 VDC
10 pF 390 pF 100 pF 820 pF
S47 / 2220
L
W
T
E/B
.225 ±.015
.200 ±.015
.150 Ma x.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
500 VDC
1000 pF 0.018 µF 0.01 µF 0.470 µF
630 VDC
1000 pF 0.018 µF 0.01 µF 0.270 µF
1000 VDC
100 pF 0.015 µF 1000 pF 0.120 µF
2000 VDC
100 pF 5600 pF 1000 pF 0.039 µF
3000 VDC
10 pF 2700 pF 100 pF 0.010 µF
4000 VDC
10 pF 1500 pF 100 pF 2700 pF
5000 VDC
10 pF 470 pF 100 pF 1500 pF
6000 VDC
10 pF 470 pF 100 pF 820 pF
S48 / 2225
L
W
T
E/B
.225 ±.010
.255 ±.015
.16 0 M a x.
.025 ±.015
(5.72 ±.25)
(6.48 ±.38)
(4.06)
(0.64±.38)
500 VDC
1000 pF 0.027 µF 0.01 µF 0.560 µF
630 VDC
1000 pF 0.022 µF 0.01 µF 0.390 µF
1000 VDC
100 pF 0.018 µF 1000 pF 0.180 µF
2000 VDC
100 pF 8200 pF 1000 pF 0.056 µF
3000 VDC
10 pF 3300 pF 100 pF 0.012 µF
4000 VDC
10 pF 1800 pF 100 pF 3300 pF
5000 VDC
10 pF 470 pF 100 pF 2700 pF
6000 VDC
10 pF 470 pF 100 pF 1200 pF
Available cap. values include these significant retma values and their multiples: 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2
( 1.0 = 1.0, 10, 100, 1000, etc.) Consult factory for non-retma values and sizes or voltages not shown.
ELECTRICAL CHARACTERISTICS
Meets the standard NP0 & X7R dielectric specifications listed on page 39
DIELECTRIC WITHSTANDING VOLTAGE
DWV = 1.5 X rated WVDC for ratings 500-999 WVDC,
DWV = 1.2 X rated WVDC for ratings ≥ 1,000 WVDC
NOTE: Capacitors may require a surface coating to prevent external arcing. Solder mask should not be used beneath
capacitors. For more information see JDI Tech Note “Surface Arc Season”
HIGH VOLTAGE SURFACE MOUNT MLCCS 250 - 6,000 VDC
L
W
TE/B
HOW TO ORDER HIGH VOLTAGE SURFACE MOUNT
P/N written: 202R18W102KV4E
202 R18 W 102 K V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
501 = 500 V
631 = 630 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
602 = 6000 V
R15 = 0805
R18 = 1206
R29 = 1808
S41 = 1210
S43 = 1812
S47 = 2220
S48 = 2225
S49 = 1825
N = NP0
W = X7R
1st two digits are signifi-
cant; third digit denotes
number of zeros.
102 = 1000 pF
104 = 0.10 µF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with 100%
Sn Plating (Matte)
F = Polyterm
flexible termination
T = SnPb
4 = Unmarked
6 = EIA Code
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
8
www.johansondielectrics.com
AC SAFETY CAPACITORS
Johanson Dielectrics Type SC ceramic chip capacitors are
designed for AC voltage surge and lightning protection in line-
to-ground interface applications in computer networks, modem,
facsimile and other equipment.
Johanson’s safety capacitor offering includes four different case
sizes and NP0 and X7R dielectric materials.
These devices are surface mount ready with barrier terminations
and tape and reel packaging.
Information on capacitor safety ratings and certification details
may be found below.
L
W
TE/B
Polyterm
®
soft termination
option for demanding
environments & processes
available on select parts,
please contact the factory.
SAFETY
RATING
VOLTAGE
RATING
WITHSTANDING
VOLTAGE
IMPULSE
VOLTAGE
CASE
SIZE
JOHANSON
ORDERING P/N
X2/Y3 250 VAC 1,500 VAC 2,500 V 1808 302R29______V3E-****-SC
STANDARDS: IEC 60384-14:2005, EN 60950 2001 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 • UL File E212609 • Semko 0026092-1 & 0003222-1
Y3 250 VAC 1,500 VAC 2,500 V 1812 302S43______V3E-****-SC
STANDARDS: IEC 60384-14:2005, EN 60950:2001 CERTIFICATIONS: TUV Rheinland R 50227900
X1/Y2 250 VAC 1,500 VAC 5,000 V 1808 502R29______V3E-****-SC
STANDARDS: IEC 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 / UL File E212609
Y2 250 VAC 1,500 VAC 5,000 V 2211 502R30______V3E-****-SC
STANDARDS: IEC 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 • UL File: E212609
X1/Y2 250 VAC 1,500 VAC 5,000 V 2220 502S47______V3E-****-SC
STANDARDS: IEC 60384-14:2005 • UL 60950-01 CERTIFICATIONS: TUV Rheinland R 50227900 • UL File: E212609
X Capacitors are defined as suitable for use in situations where failure of the capacitor would not lead to danger of electric shock.
Y Capacitors are defined as suitable for use in situations where failure of the capacitor could lead to danger of electric shock.
9
www.johansondielectrics.com
HOW TO ORDER AC SAFETY CAPACITORS
P/N written: 302R29W102MV3E-****-SC
502 R29 W 102 M V 3 E -****-SC
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
TYPE
302 = 250VAC
[2500V Impulse]
502 = 250VAC
[5000V Impulse]
R29=1808
R30=2211
S43=1812
S47=2220
AC2=2220
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros, R = decimal.
102 = 1000 pF
104 = 0.10 µF
5R0 = 5.0pF
J = ± 5%
K = ± 10%
M = ± 20%
V = NI Barrier with
100% Sn Plating
(Matte)
F = Polyterm
flexible termination
3 = Required
Safety Mark
E = Embossed 7”
No code = bulk
Tape specs.
per EIA RS481
SC = Safety
Certified
AC SAFETY CAPACITORS
R29 / 1808
X2/Y3
L
W
T
E/B
L
W
T
E/B
S43 / 1812
Y3
L
W
T
E/B
R29 / 1808
X1/Y2
L
W
T
E/B
S43 / 1812
X1/Y2
L
W
T
E/B
R30 / 2211
Y2
DIELECTRIC
NP0
X7R
SAFETY CERTIFIED
5 pF
10 pF
12 pF
15 pF
18 pF
22 pF
27 pF
33 pF
47 pF
56 pF
68 pF
100 pF
120 pF
150 pF
180 pF
220 pF
270 pF
330 pF
470 pF
560 pF
680 pF
1000 pF
1200 pF
1500 pF
1800 pF
2200 pF
2700 pF
3300 pF
4700 pF
INCHES (MM)
.185 ±.015
.080 ±.010
.085 Max.
.020 ±.010
(4.70 ±.38)
(2.03 ±.25)
(2.16 )
(0.51±.25)
.175 ±.010
.125 ±.010
.115 M a x.
.025 ±.015
(4.45 ±.25)
(3.17 ±. 25)
(2.92)
(0.64±.38)
.185 ±.015
.080 ±.015
.085 Max.
.012 ±.015
(4.80 ±.38)
(2.03 ±.25)
(2.16 )
(0. 30 ±.13)
.175 ±.010
.125 ±.010
.115 M a x.
.025 ±.015
(4.45 ±.25)
(3.17 ±. 25)
(2.92)
(0.64±.38)
.225 ±.016
.110 ±.010
.115 M a x.
.020 ±.010
5.72 ±.40)
(2.80 ±.25)
(2.92)
(0.51±.25)
.225 ±.015
.200 ±.015
.150 Ma x.
.025 ±.015
(5.72 ±.38)
(5.08 ±.38)
(3.81)
(0.64±.38)
S47 / 2220
X1/Y2
L
W
T
E/B
10
www.johansondielectrics.com
X2Y
®
FILTER & DECOUPLING CAPACITORS
X2Y
®
filter capacitors employ a unique, patented low inductance design featuring two balanced capacitors
that are immune to temperature, voltage and aging performance differences.
These components offer superior decoupling and EMI filtering performance, virtually eliminate parasitics, and
can replace multiple capacitors and inductors saving board space and reducing assembly costs.
ADVANTAGES
• One device for EMI suppression or decoupling
• Replace up to 7 components with one X2Y
• Differential and common mode attenuation
• Matched capacitance line to ground, both lines
• Low inductance due to cancellation effect
APPLICATIONS
• Amplifier FIlter & Decoupling
• High Speed Data Filtering
• EMC I/O Filtering
• FPGA / ASIC / µ-P Decoupling
• DDR Memory Decoupling
X2Y® technology patents and registered trademark under license from X2Y ATTENUATORS, LLC
EMI Filtering
(1 Y-Cap.)
<10pF
10pF
22pF
27pF
33pF
47pF
100pF
220pF
470pF
1000pF
1500pF
2200pF
4700pF
.010µF
.015µF
.022µF
.039µF
.047µF
0.10µF
0.18µF
0.22µF
0.33µF
0.40µF
0.47µF
1.0µF
Power Bypass
(2 Y-Caps.)
<20pF
20pF
44pF
54pF
66pF
94pF
200pF
440pF
940pF
2000pF
3000pF
4400pF
9400pF
.020µF
.030µF
.044µF
.078µF
.094µF
0.20µF
0.36µF
0.44µF
0.68µF
0.80µF
0.94µF
2.0µF
SIZE
CAP.
CODE
XRX
100
220
270
330
470
101
221
471
102
152
222
472
103
153
223
393
473
104
184
224
334
404
474
105
0402 (X07)
NP0
50 50 50 50 50 50 50
X7R
50 50 50 50 50 50 16
0603 (X14)
NP0
100 100 100 100 100 50 50 50
X7R
100 100 100 100 100 100 100 100 50 25 25 16 10 10
X5R
16 10 10 10
0805 (X15)
NP0
100 100 100 100 100 100 100 50
X7R
100 100 100 100 100 100 100 100 50 50 50 25 10
1206 (X18
NP0 VOLTAGE
RATINGS
6.3 = 6.3 VDC
10 = 10 VDC
16 = 16 VDC
25 = 25 VDC
50 = 50 VDC
100 = 100 VDC
500 = 500 VDC
100
X7R
100 100 100 100 100 16 16 10
1210 (X41)
X7R
500 100 100 100 25 16
1410 (X44)
X7R
500 100
1812 (X43)
X7R
500 100
Contact factory for part combinations not shown.
Filtering capacitance is specified as Line-to-Ground ( Terminal A or B to G)
Power Bypass capacitance is specified Power-to-Ground (A + B to G)
Rated voltage is from line to ground in Circuit 1, power to ground in Circuit 2 .
HOW TO ORDER X2Y® CAPACITORS
P/N written: 101X14W102MV4T
100 X14 W 102 M V 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
501 = 500 V
X07 = 0402
X14 = 0603
X15 = 0805
X18 = 1206
X41 = 1210
X44 = 1410
X43 = 1812
N = NP0
W = X7R
X = X5R
1st two digits are signifi-
cant; third digit denotes
number of zeros, R =
decimal.
102 = 1000 pF
104 = 0.10 µF
5R6 = 5.6pF
M = ± 20%
* D = ± 0.50 pF
*Values < 10 pF only
V = NI Barrier with 100%
Tin Plating (Matte)
F = Polyterm
flexible termination
T = SnPb
4 = Unmarked
(Not available)
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
11
www.johansondielectrics.com
Dimensional ViewCross-sectional View
G
G
A
B
Equivalent Circuits
G1
A
G2
B
EB
CB
L
W
T
EB
CB
L
W
T
X2Y
®
FILTER & DECOUPLING CAPACITORS
CASE SIZE
0402 (X07) 0603 (X14) 0805 (X15) 1206 (X18) 1210 (X41) 1410 (X44) 1812 (X43)
IN MM IN MM IN MM IN MM IN MM IN MM IN MM
L
0.045 ±
0.003
1.14 3 ±
0.076
0.064 ±
0.005
1.626 ±
0.127
0.080 ±
0.008
2.032 ±
0.203
0.124 ±
0.010
3.15 0 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
0.140 ±
0.010
3.556 ±
0.254
0.174 ±
0.010
4.420 ±
0.254
W
0.025 ±
0.003
0.635 ±
0.076
0.035 ±
0.005
0.889 ±
0.127
0.050 ±
0.008
1.270 ±
0.203
0.063 ±
0.010
1.600 ±
0.254
0.098 ±
0.010
2.489 ±
0.254
0.098 ±
0.010
2.490 ±
0.254
0.125 ±
0.010
3.175 ±
0.254
T
0.020
max
0.508
max
0.026
max
0.660
max
0.040
max
1.016
max
0.050
max
1.270
max
0.070
max
1.778
max
0.070
max
1.778
max
0.090
max
2.286
max
EB
0.008 ±
0.003
0.203 ±
0.076
0.010 ±
0.006
0.254 ±
0.152
0.012 ±
0.008
0.305 ±
0.203
0.016 ±
0.010
0.406 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.018 ±
0.010
0.457 ±
0.254
0.022 ±
0.012
0.559 ±
0.305
CB
0.012 ±
0.003
0.305 ±
0.076
0.018 ±
0.004
0.457 ±
0.10 2
0.022 ±
0.005
0.559 ±
0.127
0.040 ±
0.005
1.016 ±
0.127
0.045 ±
0.005
1.14 3 ±
0.127
0.045 ±
0.005
1.14 3 ±
0.127
0.045 ±
0.005
1.14 3 ±
0.127
ELECTRICAL
CHARACTERISTICS NP0 X7R X5R
TEMPERATURE COEFFICIENT:
0±30ppm/°C (-55 to +125°C) ±15% (-55 to +125°C) ±15% (-55 to +85°C)
DIELECTRIC STRENGTH:
Vrated ≤100VDC: DWV = 2.5 X WVDC, 25°C, 50mA max. Vrated = 500VDC: DWV = 1.5 X WVDC,
25°C, 50mA max.
DISSIPATION FACTOR:
0.1% ma x.
WVDC ≥ 50 VDC: 2.5% max.
WVDC = 25 VDC: 3.5% max.
WVDC = 10-16 VDC: 5.0% max.
WVDC = 6.3 VDC: 10% max.
WVDC ≥ 50 VDC: 5% max.
WVDC ≤ 25 VDC: 10% max.
INSULATION RESISTANCE
(MIN. @ 25°C, WVDC)
C≤ 0.047µF: 1000 ΩF or 100 GΩ, whichever is less
C> 0.047µF: 500 ΩF or 10 GΩ, whichever is less
TEST CONDITIONS:
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS 1.0kHz±50Hz @ 1.0±0.2 Vrms
OTHER:
See page 39 for additional dielectric specifications.
EMI Filtering S21
Signal-to-Ground
Power Bypass S21
Power-to-Ground
10.0Ω
1.00Ω
0.10Ω
0.01Ω
Approximate Impedance (Ω)
10.0Ω
1.00Ω
0.10Ω
0.01Ω
Approximate Impedance (Ω)
Labeled capacitance values below follow the P/N order code (single Y cap value)
Effective capacitance measured in Circuit 2 is 2X of the labled single Y cap value.
12
www.johansondielectrics.com
THE X2Y® DESIGN - A BALANCED, LOW ESL, “CAPACITOR CIRCUIT”
The X2Y
®
capacitor design starts with standard 2 terminal MLC capacitor’s opposing electrode sets, A & B, and adds a third electrode set (G) which
surround each A & B electrode. The result is a highly vesatile three node capacitive circuit containing two tightly matched, low inductance capacitors
in a compact, four-terminal SMT chip.
AMPLIFIER INPUT FILTER EXAMPLE
In this example, a single Johanson X2Y
®
component was used to filter noise at the input of a
DC instrumentation amplifier. This reduced component count by 3-to-1 and costs by over 70%
vs. conventional filter components that included 1% film Y-capacitors.
Parameter X2Y®
10nF
Discrete
10nF, 2 @ 220 pF
Comments
DC offset shift < 0.1 µV < 0.1 µV Referred to input
Common mode rejection 91 dB 92 dB
Source: Analog Devices, “A Designer’s Guide to Instrumentation Amplifiers (2nd Edition)” by Charles Kitchin and Lew Counts
EMI FILTERING:
The X2Y
®
component contains two shunt or “line-to-ground” Y capacitors. Ultra-low ESL (equivalent
series inductance) and tightly matched inductance of these capacitors provides unequaled high frequency
Common-Mode noise filtering with low noise mode conversion. X2Y
®
components reduce EMI emissions
far better than unbalanced discrete shunt capacitors or series inductive filters. Differential signal loss is
determined by the cut off frequency of the single line-to-ground (Y) capacitor value of an X2Y
®
.
X2Y
®
FILTER & DECOUPLING CAPACITORS
POWER BYPASS / DECOUPLING
For Power Bypass applications, X2Ys
®
two “Y” capacitors are connected in parallel. This doubles the total
capacitance and reduces their mounted inductance by 80% or 1/5th the mounted inductance of similar sized
MLC capacitors enabling high-performance bypass networks with far fewer components and vias. Low ESL
delivers improved High Frequency performance into the GHz range.
GSM RFI ATTENUATION IN AUDIO & ANALOG
GSM handsets transmit in the 850 and 1850 MHz bands using a TDMA pulse
rate of 217Hz. These signals cause the GSM buzz heard in a wide range of audio
products from headphones to concert hall PA systems or “silent” signal errors
created in medical, industrial process control, and security applications. Testing
was conducted where an 840MHz GSM handset signal was delivered to the
inputs of three different amplifier test circuit configurations shown below whose
outputs were measured on a HF spectrum analyzer.
1) No input filter, 2 discrete MLC 100nF power bypass caps.
2) 2 discrete MLC 1nF input filter, 2 discrete MLC 100nF power bypass caps.
3) A single X2Y 1nF input filter, a single X2Y 100nF power bypass cap.
X2Y configuration provided a nearly flat response above the ambient and up to
10 dB imrpoved rejection than the conventional MLCC configuration.
13
www.johansondielectrics.com
X2Y HIGH PERFORMANCE POWER BYPASS - IMPROVE PERFORMANCE, REDUCE SPACE & VIAS
Actual measured performance of two high performance SerDes FPGA designs demonstrate how a 13 component X2Y bypass network
significantly out performs a 38 component MLC network. For more information see http://johansondielectrics.com/pdfs/JDI_X2Y_STXII.pdf
COMMON MODE CHOKE REPLACEMENT
• Superior High Frequency Emissions Reduction
• Smaller Sizes, Lighter Weight
• No Current Limitation
• Vibration Resistant
• No Saturation Concerns
See our website for a detailed application note with component
test comparisons and circuit emissions measurements.
X2Y
®
FILTER & DECOUPLING CAPACITORS
PARALLEL CAPACITOR SOLUTION
A common design practice is to parallel decade capacitance values to
extend the high frequency performance of the filter network. This causes an
unintended and often over-looked effect of anti-resonant peaks in the filter
networks combined impedance. X2Y’s very low mounted inductance allows
designers to use a single, higher value part and completely avoid the anti-
resonance problem. The impedance graph on right shows the combined
mounted impedance of a 1nF, 10nF & 100nF 0402 MLC in parrallel in RED.
The MLC networks anti-resonance peaks are nearly 10 times the desired
impedance. A 100nF and 47nF X2Y are plotted in BLUE and GREEN. (The
total capacitance of X2Y (Circuit 2) is twice the value, or 200nF and 98nF in this
example.) The sigle X2Y is clearly superior to the three paralleled MLCs.
Measured Common Mode Rejection
14
www.johansondielectrics.com
LOW INDUCTANCE CHIP CAPACITORS (LICC)
LICC capacitors are specially designed to exhibit lower inductance by altering
the aspect ratio of the terminations. The smaller current loop length results in
Equivalent Series Inductance (ESL) that is typically 60% lower then standard MLCs
of the same size. This ESL improvement is extremely advantageous in the high
frequency power decoupling of high speed digital MPU, FPGA, DSP, etc..
FEATURES
• Low Inductance • Surface Mount
• High Series Resonant Frequency • Small Size
• Sn-Pb and Polyterm® Termination Options • RoHS Compliant
WMLC
L
LLICC
W
HOW TO ORDER LICC CAPACITORS
P/N written: 101X14W102MV4T
100 B14 X 224 M V 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
B14 = 0306
B15 = 0508
B18 = 0612
W = X7R
X = X5R
1st two digits are signifi-
cant; third digit denotes
number of zeros
103 = 0.01 µF (10NF)
104 = 0.10 µF
M = ± 20%
*Values < 10 pF only
V = NI Barrier with 100%
Tin Plating (Matte)
T = SnPb
4 = Unmarked
(Not available)
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
CASE SIZE AVAILABLE CAPACITANCE
JDI EIA MM
DIELECTRIC 10nF 22nF 47nF 0.10uF 0.22uF 0.47uF 1.00uF 2.2uF 4.7uF 10uF
B14 0306 0816
X7R 25V 25V 25V 16V 6.3V
X5R 10V 10V 6.3V 6.3V 6.3V
B15 0508 1220
X7R 50V 50V 25V 25V 16V 6.3V 6.3V
X5R 10V 10V 6.3V
B18 0612 1632
X7R 50V 50V 50V 50V 25V 16V 6.3V
X5R 10V 10V 6.3V 6.3V
Please visit our website for complete specifications
15
www.johansondielectrics.com
CHIP FILTER / FEED-THRU CAPACITORS
Our Feed-Thru Capacitors provide excellent EMI, I/O & Power Line filtering
exhibiting much lower inductance than standard SMT capacitors which results in
broader frequency response. These are Precious Metal Electrode (PME) products
with higher current ratings than comparable Base Metal Electrode (BME) parts.
FEATURES APPLICATIONS
• 1 Amp Current Rating • DC Power Line EMI Filter
• Low Inductance, High SRF • RF Immunity FIlter
• Surface Mount Non-polarized • RF Amplifier Gain Filter
• Sn-Pb and Polyterm® Options
HOW TO ORDER CHIP FILTER / FEED-THRU
P/N written: 250F14W103YV4E
250 F14 W 103 Y V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
F14 = 0603
F15 = 0805
F18 = 1206
N = NP0
W = X7R
1st two digits are signifi-
cant; third digit denotes
number of zeros.
102 = 1000 pF
103 = 0.01 µF
104 = 0.10 µF
K = ± 10%
M = ± 20%
Y = + 50% -20%
V = Ni Barrier w/
100% Sn Plating (150°C)
T = Ni Barrier w/
95%Sn/5%Pb Plating (150°C)
4 = Unmarked
(Not available)
E =Embossed 7”
T =Punched 7”
No code = bulk
Tape specs.
per EIA RS481
CASE SIZE AVAILABLE CAPACITANCE
JDI EIA MM DIELECTRIC 22pF 47pF 100pF 220pF 470pF 1.0nF 2.2nF 4.7nF 10nF 22nF 47nF 100nF 220nF
F14 0603 1608 NP0
50V 50V 50V 50V
X7R
25V 25V 25V 25V 25V 25V 25V
F15 0805 2012 NP0
50V 50V 50V 50V 50V
X7R
50V 50V 50V 50V 50V 50V 50V
F18 1206 3216 NP0
100V 100V 100V 100V 100V 100V
X7R
50V 50V 50V 50V 50V 50V 50V
Please visit our website for complete specifications
16
www.johansondielectrics.com
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
Johanson’s high temperature MLCC series exhibit stable performance
across an extended operating temperature range of -55°C to +200°C.
Both Class I and Class II parts are available with DC voltage ratings of
50,100 and 200V satisfying a wide range of demanding applications.
FEATURES APPLICATIONS
• Stable 200°C Operation • Deep Hole Drilling Electronics
• Compact SMD Chip • High Temperature Modules
• Polyterm® Termination Option • Industrial Equipment
• Sn-Pb Termination Option • Automotive • Avionics
MECHANICAL CHARACTERISTICS
RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
MINIMUM MAXIMUM MINIMUM MAXIMUM
T07/0402
25 VDC 10 pF 270 pF 100 pF 4700 pF
50 VDC 10 pF 120 pF 100 pF 1500 pF
100 VDC 10 pF 82 pF 10 pF 390 pF
200 VDC 10 pF 50 pF 10 pF 100 pF
T14/0603
25 VDC 10 pF 820 pF 1000 pF 0.022 µF
50 VDC 10 pF 330 pF 1000 pF 0.010 µF
100 VDC 10 pF 220 pF 100 pF 2200 pF
200 VDC 10 pF 120 pF 100 pF 560 pF
T15/0805
25 VDC 100 pF 2200 pF 1000 pF 0.100 µF
50 VDC 100 pF 1500 pF 1000 pF 0.033 µF
100 VDC 100 pF 1000 pF 1000 pF 0.010 µF
200 VDC 10 pF 680 pF 100 pF 2200 pF
Inches (mm)
.080 ±.010 (2.03 ±.25)
.050 ±.010 (1.27 ±.25)
.055 Max. (1.40)
.020±.010 (0.51±.25 )
L
W
T
E/B
Inches (mm)
.040 ±.004 (1.02 ±.10)
.020 ±.004 (0.51 ±.10)
.025 Max. (0.64)
.008±.004 (.20±.10)
L
W
T
E/B
Inches (mm)
.063 ±.008 (1.60 ±.20)
.032 ±.008 (0.81 ±.20)
.035 Max. (0.89)
.010±.005 (.25±.13)
L
W
T
E/B
ELECTRICAL CHARACTERISTICS
X7R Temp. Only
X7R Temp. & Rated Voltage (100%)
NP0 Temp. & Rated Voltage (100%)
NP0 X7R
OPERATING RANGE:
-55 to +200°C -55 to +200°C
TEMPERATURE
COEFFICIENT:
0±30ppm/°C
(-55to+125°C) 0±15% (-55to+125°C)
200°C CAP. DROP:
-0.5% max. -45% max.
DISSIPATION FACTOR:
0.001 (0.1%) max. 0.020 (2.0%) max.
AGING RATE:
None <1.0% per decade
INSULATION RESISTANCE:
25°C IR >100GΩ or 1000ΩF (whichever
200°C IR >1ΩF or 100MΩ is less)
WITHSTANDING VOLTAGE:
2.5 X WVDC for ratings ≤ 200 VDC
1.5 X WVDC for ratings 201-500 VDC
TEST CONDITIONS:
C > 100 pF; 1kHz ±50Hz; 1.0±0.2 VRMS
C ≤ 100 pF; 1Mhz ±50kHz; 1.0±0.2 VRMS
17
www.johansondielectrics.com
HIGH TEMPERATURE SURFACE MOUNT MLCCS 200°C
L
W
TE/B
MECHANICAL CHARACTERISTICS
RATED
VOLTAGE
NP0 DIELECTRIC X7R DIELECTRIC
MINIMUM MAXIMUM MINIMUM MAXIMUM
T18/1206
25 VDC 100 pF 6800 pF 1000 pF 0.220 µF
50 VDC 100 pF 3300 pF 1000 pF 0.100 µF
100 VDC 100 pF 2200 pF 1000 pF 0.022 µF
200 VDC 100 pF 1500 pF 1000 pF 5600 pF
T41/1210
25 VDC 1000 pF 0.015 µF 0.047 µF 0.470 µF
50 VDC 1000 pF 5600 pF 0.047 µF 0.220 µF
100 VDC 100 pF 4700 pF 0.047 µF 0.056 µF
200 VDC 100 pF 3300 pF 0.047 µF 0.015 µF
T43/1812
25 VDC 1000 pF 0.033 µF 0.047 µF 1.000 µF
50 VDC 1000 pF 0.012 µF 0.047 µF 0.470 µF
100 VDC 1000 pF 0.010 µF 0.047 µF 0.180 µF
200 VDC 1000 pF 8200 pF 0.047 µF 0.047 µF
T49/1825
25 VDC 1000 pF 0.033 µF 0.10 µF 2.200 µF
50 VDC 1000 pF 0.027 µF 0.10 µF 1.000 µF
100 VDC 1000 pF 0.022 µF 0.10 µF 0.560 µF
200 VDC 1000 pF 0.018 µF 0.10 µF 0.150 µF
T48/2225
25 VDC 1000 pF 0.100 µF 0.10 µF 3.300 µF
50 VDC 1000 pF 0.039 µF 0.10 µF 1.500 µF
100 VDC 1000 pF 0.033 µF 0.10 µF 0.820 µF
200 VDC 1000 pF 0.022 µF 0.10 µF 0.220 µF
Inches (mm)
.125 ±.010 (3.17 ±.25)
.062 ±.010 (1.57 ±.25)
.067 Max. (1.70)
.020±.010 (0.51±.25 )
L
W
T
E/B
Inches (mm)
.125 ±.010 (3.18 ±.25)
.095 ±.010 (2.41 ±.25)
.090 Max. (2.03)
.020±.010 (0.51±.25 )
L
W
T
E/B
Inches (mm)
.175 ±.010 (4.45 ±.25)
.125 ±.010 (3.17 ±.25)
.110 Max. (2.80)
.025±.015 (0.64±.38)
L
W
T
E/B
Inches (mm)
.180 ±.010 (4.57 ±.25)
.250 ±.010 (6.35 ±.25)
.140 Max. (3.56)
.025±.015 (0.64±.38)
L
W
T
E/B
Inches (mm)
.225 ±.010 (5.72 ±.25)
.255 ±.015 (6.48 ±.38)
.160 Max. (4.06)
.025±.015 (0.64±.38)
L
W
T
E/B
HOW TO ORDER 200°C MLCCS
P/N written: 500T14W103KV4E
500 T14 W 103 K V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
T07 = 0402
T14 = 0603
T15 = 0805
T18 = 1206
T41 = 1210
T43 = 1812
T49 = 1825
T48 = 2225
N = NP0
W = X7R
1st two digits are signifi-
cant; third digit denotes
number of zeros.
102 = 1000 pF
103 = 0.01 µF
104 = 0.10 µF
NP0
J = ± 5%
K = ± 10%
X7R
K = ± 10%
M = ± 20%
V = Ni Barrier w/
100% Sn Plating (150
°
C)
T = Ni Barrier w/
95%Sn/5%Pb Plating (150
°
C)
E = Ni Barrier w/
100% Sn Plating (180
°
C)
P = Palladium Silver Pd-Ag
(250
°
C)
4 = Unmarked
(Not available)
E = Embossed 7”
T = Punched 7”
No code = bulk
Tape specs.
per EIA RS481
18
www.johansondielectrics.com
TANCERAM
®
CHIP CAPACITORS
TANCERAM
®
chip capacitors can replace tantalum capacitors
in many applications and offer several key advantages over
traditional tantalums. Because TANCERAM
®
capacitors exhibit
extremely low ESR, equivalent circuit performance can often be
achieved using considerably lower capacitance values. Low
DC leakage reduces current drain, extending the battery life of
portable products. TANCERAM
®
high DC breakdown voltage
ratings offer improved reliability and eliminate large voltage
de-rating common when designing with tantalums.
ADVANTAGES
• Low ESR • Low DC Leakage
• Higher Surge Voltage • Non-polarized Devices
• Reduced CHIP Size • Improved Reliability
• Higher Insulation Resistance • Higher Ripple Current
APPLICATIONS
• Switching Power Supply Smoothing (Input/Output) • Backlighting Inverters
• DC/DC Converter Smoothing (Input/Output) • General Digital Circuits
HOW TO ORDER TANCERAM®
Part number written: 100R15X106MV4E
100 R15 X 106 M V 4 E
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
6R3 = 6.3 V
100 = 10 V
160 = 16 V
250 = 25 V
500 = 50 V
101 = 100 V
See Chart
W = X7R
X = X5R
1st two digits are
significant; third digit
denotes number of
zeros.
105 = 1.00 µF
476 = 47.0 µF
107 = 100 µF
K = ±10%
M = ±20%
V = Nickel Barrier
with 100% Tin
Plating (Matte)
T = SnPb*
(*available on
select parts)
4 = Unmarked
Code Type Reel
E Plastic 7”
T Paper 7”
Tape specifications
conform to EIA
RS481
19
www.johansondielectrics.com
CASE SIZE CAPACITANCE SELECTION
EIA / JDI INCHES
(mm) VDC 1.0 µF 2.2 µF 3.3 µF 4.7 µF 10 µF 22 µF 47 µF 100 µF
0402
R07
L
W
T
EB
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1.02 ±.10 )
(0. 51 ±.10)
(0.64)
(0. 20 ±.10)
16
10
6.3
0603
R14
L
W
T
EB
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(. 25±.13)
25
16
10
6.3
0805
R15
L
W
T
EB
.080 ±.010
.050 ±.010
.060 Max.
.020±.010
(2.03 ±.25)
(1.27 ±.25)
(1.52)
(0.51±.25 )
50
25
16
10
6.3
1206
R18
L
W
T
EB
.125 ±.013
.062 ±.010
.070 Max.
.020 +.015-0.01
(3.17 ±.3 5)
(1.57 ±.25)
(1.78)
(0.51+.38-.25)
100
50
35
25
16
10
6.3
1210
S41
L
W
T
EB
.126 ±.016
.098 ±.012
.110 M a x.
.020 +.015-.010
(3.20 ±.40)
(2.50 ±.30)
(2.8)
(0.51+.38-.25)
100
50
35
25
16
10
6.3
1812
S43
L
W
T
EB
.177 ±.016
.126 ±.015
.14 0 M a x.
.035 ±.020
(4.50 ±.40)
(3.20 ±.38)
(3.55)
(0.89 ±0.51)
100
50
25
16
10
6.3
W X W X W X W X W X W X W X W X
ELECTRICAL CHARACTERISTICS
DIELECTRIC: X7R X5R
TEMPERATURE COEFFICIENT:
±15% (-55 to +125°C) ±15% (-55 to +85°C)
DISSIPATION FACTOR:
For ≥ 50 VDC: 5% max.
For ≤ 35 VDC: 10% max.
For ≥ 50 VDC: 5% max.
For ≤ 35 VDC: 10% max.
INSULATION RESISTANCE (MIN. @ 25°C, WVDC)
100 ΩF or 10 GΩ, whichever is less
DIELECTRIC STRENGTH:
2.5 X WVDC, 25°C, 50mA max.
TEST CONDITIONS:
Capacitance values ≤ 10 µF: 1.0kHz±50Hz @ 1.0±0.2 Vrms
Capacitance values > 10 µF: 120Hz±10Hz @ 0.5V±0.1 Vrms
OTHER:
See page 39 for additional dielectric specifications.
TANCERAM
®
CHIP CAPACITORS
L
W
TE/B
DIELECTRIC
W (X7R)
X (X5R)
20
www.johansondielectrics.com
CASE SIZE
Voltage
AVAILABLE CAPACITANCE CODE
JDI Inches (mm)
0R5
XRX
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
R05
L
W
T
EB
0201
.024 ±.001
.012 ±.001
.012 ±.001
.006 ±.002
(0603)
(0.60 ±.03)
(0.30 ±.03)
(0.30 ±.03)
(0.15±.05)
25V
16V
10V
R07
L
W
T
EB
0402
.040 ±.004
.020 ±.004
.025 Max.
.008 ±.004
(1005)
(1.02 ±.10 )
(0. 51 ±.10)
(0.64)
(0. 20 ±.10)
50V
25V
16V
10V
R14
L
W
T
EB
0603
.063 ±.008
.032 ±.008
.035 Max.
.010±.005
(1608)
(1.60 ±.20)
(0.81 ±.20)
(0.89)
(. 25±.13)
200V
100V
50V
25V
16V
R15
L
W
T
EB
0805
.080 ±.010
.050 ±.010
.050 Max.
.020±.010
(2012)
(2.03 ±.25)
(1.27 ±.25)
(1.27)
(0.51±.25 )
200V
100V
50V
25V
16V
R18
L
W
T
EB
1206
.125 ±.010
.062 ±.010
.050 Max.
.020 ±.010
(3216)
(3.17 ±. 25)
(1.57 ±.25)
(1.27)
(0.51 ±.25)
200V
100V
50V
25V
S41
L
W
T
EB
1210
.125 ±.010
.095 ±.010
.065 Max.
.020 ±.010
(3224)
(3.18 ±. 25)
(2.41 ±.25)
(1.65)
(0.51 ±.25)
200V
100V
NP0
50V
L
W
TE/B
X7R
25V
X5R
16V
S43
L
W
T
EB
1812
.175 ±.010
.125 ±.010
.085 Max.
.025 ±.015
(4532)
(4.45 ±.25)
(3.17 ±. 25)
(2.16 )
(0.64 ±.38)
200V
100V
50V
25V
0R5
XRX
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
561
681
821
102
SURFACE MOUNT MLCCS 10 - 200 VDC
HOW TO ORDER - SURFACE MOUNT MLCC
Part number written: 100R07W104KV4E
100 R 07 W 104 K V 4E
VOLTAGE SERIES/SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
100 = 10 V DC
160 = 16 V DC
250 = 25 V DC
500 = 50 V DC
101 = 100 V DC
201 = 200 V DC
R05 = 0201
R07 = 0402
R14 = 0603
R15 = 0805
R18 = 1206
S41 = 1210
S43 = 1812
N = NP0
W = X7R
X = X5R
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
5R6 = 5.6 pF
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
* F = ± 1 %
* G = ± 2%
* J = ± 5%
* K = ± 10%
* M = ± 20%
*Values < 10 pF
only
V = Nickel Barrier
with 100% Tin
Plating (Matte)
T = SnPb
3 = Special
4 = Unmarked
6 = EIA Code*
*Not available
on sizes
≤ 0402
E = Embossed 7”
T = Punched 7”
U = Embossed 13”
R = Punched 13”
No code = bulk
Tape specifications
on page 48. Not all
tape styles are avail-
able on all parts.
21
www.johansondielectrics.com
AVAILABLE CAPACITANCE CODE
Voltage
CASE
SIZE
122
152
182
222
272
332
392
472
562
822
103
123
153
183
223
273
333
473
563
683
823
104
224
334
474
105
225
335
475
106
476
107
0201
R05
NP0
25V
X7R
16V
X5R
10V
See Tanceram High
Capacitance Series
for values ≥ 1.0µF
0402
R07
50V
25V
16V
10V
200V
0603
R14
100V
50V
25V
16V
200V
0805
R15
100V
50V
25V
16V
200V
1206
R18
100V
50V
25V
200V
1210
S41
100V
50V
25V
16V
200V
1812
S43
100V
50V
25V
122
152
182
222
272
332
392
472
562
822
103
123
153
183
223
273
333
473
563
683
823
104
224
334
474
105
225
335
475
106
476
107
SURFACE MOUNT MLCCS 10 - 200 VDC
ELECTRICAL CHARACTERISTICS
Please refer to page 39 of the catalog or www.johansondielectrics.com
22
www.johansondielectrics.com
CASE SIZE
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN
.100" TYP
.055"
± .010
.020"
± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
STRAIGHT LEAD L-LEAD J-LEAD
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN .100" TYP
.055"
± .010
.020"
± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
STACKED SMPS CERAMIC CAPACITORS
Stacked Switch-Mode ceramic capacitors feature large
capacitance values and exhibit low ESR (equivalent series
resistance) and low ESL (equivalent series inductance) making
them well suited for high power and high frequency applications
where tantalum or aluminum electrolytic capacitors may not
be suitable. The P-Series feature mechanical and pin-out
configurations per DSCC 87106 and 88011 drawings while the
E-Series feature mechanical and pin-out configurations more
common in European design applications.
KEY FEATURES
• P-Series Approved to DSCC Drawings 87106 & 88011
MIL-PRF-49470
• New T-Series 200°C for downhole tools and aircraft engine
control applications.
• E-Series Common European Lead Styles available to
MIL-PRF-49470 requirements.
• NP0 & X7R Dielectrics, 50 to 500 VDC Ratings
• Low ESR / Low ESL, Ideal for SMPS Filtering Applications
• Custom Sizes, Voltages, and Values Available
HOW TO ORDER STACKED SMPS
Part number written: 201P03W275KJ4H
201 P03 W 275 K J 4 H
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
N = NP0
B = BX
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ±5%
K= ±10%
L = ±15%
M = ±20%
N = ±30%
Z = +80% -20%
P = +100% -0%
J = “J” Leads
(formed in)
K = “J” Leads with
reduced height of
.045” ±.010”
L = “L” Leads
(formed out)
M = “L” Leads with
reduced height of
.045” ±.010”
N = Straight Lead
4 = Standard
3 = Specified
T = Tape and Reel
H = High Reliability
testing per customer
requirements
S = Special Part
23
www.johansondielectrics.com
STACKED SMPS CERAMIC CAPACITORS
P-SERIES DSCC STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
LEADS
/SIDE
MECHANICAL SIZE RANGE (IN.) X7R MAX CAPACITANCE (
µ
F)
LENGTH (D) WIDTH (E) TMAX (B) 50V 100V 200V 500V
P05
13 0.275 0.300 .185 3.0 2.2 1.0 0.50
P55
5 .715 15 11 5.0 2.5
P04
14 0.425 0.440 .185 9.0 6.5 3.0 1.5
P54
5.715 45 32 15 7.5
P03
110 1.075 0.500 .185 28 20 9.5 4.7
P53
5.715 140 100 47 23
P01
120 2.075 0.500 .185 50 40 19 9.4
P51
5.715 250 200 95 46
P02
115 1.535 0.870 .185 75 55 25 14
P52
5.715 370 270 125 70
P06
120 2.075 1.350 .185 160 110 50 25
P56
5.715 800 550 250 125
Please refer to our website for complete offering including NP0 & BX capacitance ranges.
E-SERIES EUROPEAN STYLE X7R CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
LEADS
/SIDE
MECHANICAL SIZE RANGE (MM) X7R MAX CAPACITANCE (
µ
F)
LENGTH (D) WIDTH (E) TMAX (B) 50V 100V 200V 500V
E24
13 8.7 9.2 3.8 5.0 4.0 2.5 1.0
E54
4 14.8 20 16 10 4.0
E26
15 13.6 14.9 3. 16 12 7.5 3.3
E56
4 14.8 64 48 30 13
E21
16 16.6 21.6 3.8 30 22 14 6.0
E51
4 14.8 120 88 56 24
E28
114 38.2 12.0 3.8 35 25 16 7.0
E58
4 14.8 140 100 64 28
E29
114 40.6 24.0 3.8 75 50 35 16
E59
4 14.8 300 200 140 64
Please refer to our website for complete offering including NP0 & BX capacitance ranges.
NEW 200°C T-SERIES CAPACITANCE / VOLTAGE SELECTION
CASE
SIZE
CHIP
LAYERS
LEADS
/SIDE
MECHANICAL SIZE RANGE (IN.) MAX CAPACITANCE (
µ
F)
LENGTH (D) WIDTH (E) TMAX (B) 50V 100V 200V
T05
13 0.275 0.300 .185 1.20 0.68 0.33
T55
5 .715 5.60 3.30 1.50
T04
14 0.425 0.440 .185 2.70 1.50 0.82
T54
5.715 15.0 8.20 3.90
T03
110 1.075 0.500 .185 10.0 5.60 2.70
T53
5.715 47.0 27.0 12.0
Please refer to our website for complete offering including NP0 capacitance ranges.
24
www.johansondielectrics.com
MINI SWITCH-MODE
®
CAPACITORS
JDI’s Mini Switch-Mode
®
ceramic capacitors combine the
advantages of high capacitance found in tantalum capacitors
with very low ESR performance of ceramic capacitors. The “J”
and “L” lead configurations replace 1825 and 2225 SMT chips to
provide stress relief and prevent cracking due to thermal cycling
or mechanical board flexing. Another plus of the J-lead style is
that this configuration allows use of the same solder lands as
the SMT chips. See the Stacked Switch-Mode section for larger
values. See also the Technical Notes on soldering and handling
and suggested solder lands.
FEATURES
• High Capacitance, Small SIze
• Low ESR/ESL
• Leadframe reduces thermal & mechanical stress due to
board flexure and TCE mismatch
APPLICATIONS
• DC-DC Converters
• Power Supply Input & Output Filters
CAPACITANCE SELECTION
SIZE
CODE
EIA CHIP
SIZE
NP0 Max Capacitance (uF) X7R Max Capacitance (uF)
25V 50V 100V 200V 500V 25V 50V 100V 200V 500V
P09 1825 0.056 0.047 0.039 0.027 0.018 1.5 1.2 0.75 0.56 0.27
P29 1825 0.11 0.094 0.078 0.054 0.036 3.0 2.4 1.5 1.1 0.54
P39 1825 0.16 0.14 0.11 0.081 0.054 4.5 3.6 2.2 1.6 0.81
P49 1825 0.22 0.18 0.15 0.10 0.07 6.0 4.8 3.0 2.2 1.0
P08 2225 0.068 0.056 0.047 0.033 0.027 2.7 2.2 1.5 1.2 0.39
P28 2225 0.13 0.11 0.094 0.066 0.054 5.4 4.4 3.0 2.4 0.78
P38 2225 0.20 0.16 0.14 0.10 0.081 8.1 6.6 4.5 3.6 1.1
P48 2225 0.27 0.22 0.18 0.13 0.10 10 8.8 6.0 4.8 1.5
25
www.johansondielectrics.com
CASE SIZE
DIMENSIONS
APPLICABLE
TO ALL SIZES:
IN. MM
H ± .010
.070 1.78
C TYP.
.100 2.54
P ± .015
.065 1.65
DIMENSIONS
APPLICABLE
TO SPECIFIC SIZES:
P08 P09 P28 P29 P38 P39 P48 P49
IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM IN. MM
L MAX
.280 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1 0.28 7.11 0.24 6.1
W MAX
.270 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86 0.27 6.86
T MAX
.095 2.41 0.095 2.41 0.19 4.83 0.19 4.83 0.285 7.24 0.285 7.24 380 9.65 380 9.65
Note: J-Lead and L-Lead options are available on all sizes above
Lp
W
c
T
h
L
p
W
c
T
h
L
p
W
c
T
h
L
p
W
c
T
h
MINI SWITCH-MODE
®
CAPACITORS
HOW TO ORDER - MINI SWITCHMODE®
Part number written: 500P28W395KJ4U
500 P28 W 395 K J 4 U
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
103 = 0.01 μF
105 = 1.0 μF
106 = 10 uF
J = ±5%
K = ±10%
M = ±20%
Z = +80% -20%
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
3 = Standard
4 = Unmarked
U = Tape and Reel
16mm, 13” Reel
NONE = Bulk pack
H = High Reliability
testing per customer
requirements
S = Special Part
ELECTRICAL CHARACTERISTICS
DIELECTRIC: NP0 X7R
TEMPERATURE COEFFICIENT:
0 ±30ppm/°C (-55 to +125°C) ±15% (-55 to +125°C)
DISSIPATION FACTOR:
0.1% max. 2.5% max.
AGING
None -2.5% per decade hour
INSULATION RESISTANCE (MIN. @ 25°C, WVDC)
1000 ΩF or 100 GΩ, whichever is less 500 ΩF or 50 GΩ, whichever is less
DIELECTRIC STRENGTH:
For 500V Ratings: 750VDC, 25ºC, 50mA max
For 200V Ratings: 2xWVDC, 25ºC, 50mA max
For 25-100V Ratings: 2.5xWVDC, 25ºC, 50
mA max
TEST CONDITIONS:
1kHz ±50Hz;1.0±0.2 VRMS
OTHER:
See page 39 for additional dielectric specifications.
26
www.johansondielectrics.com
FEATURES APPLICATIONS
• High Capacitance, Small SIze • DC-DC Converters
• Low ESR/ESL • Power Supply Input & Output Filters
• Leadframe reduces thermal & mechanical stress
due to board flexure and TCE mismatch
• High Capacitance Applications Where Increased
Reliability is Required
• Green / ROHS Compliant
BME MINI SWITCH-MODE
®
CAPACITORS
This new series of miniature switchmode power supply filter
capacitors uses BME (Base Metal Electrode) construction to
achieve 300-400% capacitance increases and component size
reductions compared to their PME (Precious Metal Electrode)
counterparts per the comparison examples below.
BME Size / Capacitance Comparison
Technology Chips Volts Max. Cap.
PME 1x 1825 50V 1.2µF
BME 1x 1812 50V 4.7µF
PME 2x 2225 100V 4.4µF
BME 2x 2220 100V 10µF
CAPACITANCE / VOLTAGE CASE SIZE / PART NUMBER
CAPACITANCE DC VOLTAGE SIZE P0A SIZE P07 SIZE P2A SIZE P27
RATING RATING 1812 SINGLE STACK 2220 SINGLE STACK 1812 DOUBLE STACK 2220 DOUBLE STACK
2.2 µF 100V 101P0AW225MJ4U+RC
4.7 µF 50V 500P0AW475MJ4U+RC
4.7 µF 100V 101P07W475MJ4U+RC 101P2AW475MJ4U+RC
10 µF 50V 500P07W106MJ4U+RC 500P2AW106MJ4U+RC
10 µF 100V 101P27W106MJ4U+RC
22 µF 50V 500P27W226MJ4U+RC
Dimensions
Applicable
to specific sizes:
IN. MM IN. MM IN. MM IN. MM
L MAX:
0.217 5.5 0.256 6.5 0.217 5.5 0.256 6.5
W MAX:
0.157 4.0 0.217 5.5 0.157 4.0 0.217 5.5
H MAX:
0.118 3.0 0.118 3.0 0.236 6.0 0.236 6.0
Dimensions Applicable
to all sizes:
Lp2
W
c
H
h1
p1
Lp2
W
H
h1
p1 c
p2
W
H
h1
p1 c
IN. MM
H1 TYP.
.059 1.50
C TYP.
.10 0 2.54
P1 TYP.
.020 0.50
P2 ± 0.02
.065 1.65
27
www.johansondielectrics.com
ELECTRICAL CHARACTERISTICS
OPERATING RANGE: -55 to +125°C
TEMPERATURE COEFFICIENT:
X7R, ±
15%
DISSIPATION FACTOR: 0.020 (2.0%) max.
AGING RATE: <2.5% per decade
INSULATION RESISTANCE:
25°C IR >100GΩ or 1000
Ω
F
whichever is less
WITHSTANDING VOLTAGE: 2.5 X WVDC for 50 VDC
2.0 X WVDC for 100 VDC
TEST CONDITIONS:
1kHz ±50Hz; 1.0±0.2 VRMS
, 25°C
Output Filter
Capacitor
Input Filter
Capacitor
TYPICAL APPLICATION: DC-DC CONVERTER INPUT & OUTPUT FILTERING
Controller
HOW TO ORDER - BME MINI SWITCH-MODE®
Part number written: 500P07W106MJ4U+RC
500 P07 W 106 M J 4 U +RC
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
ROHS CODE
500 = 50 V
101 = 100 V
See Chart W = X7R 1st two digits are
significant; third digit
denotes number of
zeros.
225 = 2.2 μF
106 = 10 uF
M = ±20% J = “J” Leads
(formed in)
4 = Unmarked U = Embossed
Tape 13” Reel per
EIA RS481
+RC = RoHS
Compliant
BME MINI SWITCH-MODE
®
CAPACITORS
28
www.johansondielectrics.com
X2Y
®
SWITCH-MODE CERAMIC CAPACITORS
JDI’s new X2Y
®
Technology Switch-Mode ceramic capacitors
exhibit significantly lower ESL making them ideally suited for
applications where high frequency filtering performance is
critical. Lower ESL performance translates to significant size and
weight reduction because lower capacitance values perform as
well or better
KEY FEATURES
• Low ESR / Low ESL, Ideal for SMPS Filtering Applications
• Same Package Size as DSCC Drawings 87106 & 88011
MIL-PRF-49470
• NP0 & X7R Dielectrics, 50 to 500 VDC Ratings
• Custom Sizes, Voltages, and Values Available
CAPACITANCE / VOLTAGE SELECTION
Rated DC Voltage
Maximum X7R Capacitance Per Case Size (µF)
Y05 Y25 Y35 Y45 Y55 Y04 Y24 Y34 Y44 Y54 Y03 Y23 Y33 Y43 Y53
50V 2.7 5.0 8.0 11 14 8.3 17 25 33 41 29 58 87 116 145
100V 2.0 4.0 6.0 8.0 10 6.0 12 17 24 29 21 41 62 83 104
200V 0.9 1.8 2.7 4.0 5.0 2.8 5.5 8.3 11 14 9.8 20 29 39 49
500V 0.5 0.9 1.4 1.8 2.3 1.4 2.8 4.1 5.5 6.9 4.9 9.7 14 19 24
29
www.johansondielectrics.com
CASE SIZE
Y05 Y25 Y35 Y45 Y55 Y04 Y24 Y34 Y44 Y54 Y03 Y23 Y33 Y43 Y53
A.120 .240 .360 .480 .650 .120 .240 .360 .480 .650 .120 .240 .360 .480 .650
B.185 .305 .425 .545 .715 .185 .305 .425 .545 .715 .185 .305 .425 .545 .715
C.250 .400 .450
D- .224 .350 .950
D+ .275 .425 1.075
E.300 .440 .500
Pins 3 per side, configuration:
a = 1, b = 1, g = 1
5 per side, configuration
a = 1, b = 1, g = 3
10 per side, configuration
a = 3, b = 3, g = 4
All dimensions are in Inches. Tolerances are maximum except: C = ±.025” D- = minimum, D+ = maximum, F = minimum
.070" .010
C
F
.010" ± .002
0.100" TYP
±
0.055"
0.010
0.020" ± .002
.050" min
±
.050" min
E
D
0.250" MIN
0.100" MAX
0.025" MIN
BA
0.020" Min.
E
C
D
BA
.250" MIN
.100" MAX
.025" MIN .100" TYP
.055"
± .010
.020"
± .002
F
.050" min
.010" ± .002
.070" ± .010
.050" min
J-Lead
Straight Lead L-Lead
GAB GAB
G
Top View
AB
Signal
(Power)
Return
(Ground)
GG
A
B
Contact the factory for additional connection options for dual signal line EMI filtering applications.
X2Y
®
SWITCH-MODE CERAMIC CAPACITORS
HOW TO ORDER - X2Y® SMPS
Part number written: 201Y03W475KJ4H
201 Y03 W 475 M J 4 H
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
104 = 0.10 µF
105 = 1.00 µF
476 = 47.0 µF
M = ±20%
J = “J” Leads
(formed in)
L = “L” Leads
(formed out)
N = Straight Lead
4 = Standard
3 = Specified
T = Tape and Reel
H = High Reliability
testing per customer
requirements
S = Special Part
+
-
+ +
-
+
+
-
+
30
www.johansondielectrics.com
SWITCH-MODE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 25 to 500 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Hi-Rel Screened Versions Available
• Custom Sizes, Voltages, and Values Available
ADVANTAGES
• Power Supplies • Surge Protection
• Voltage Multipliers • Industrial Control Circuits
• Data Isolation • Custom Applications
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H03
W
H
T
S
LD
.300 max.
.300 max.
.200 max.
.200 nom.
.020 nom.
(7.62 max.)
(7.62 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
25 VDC .070 µF 703 2.00 µF 205
50 VDC .060 µF 603 1.60 µF 165
100 VDC .050 µF 503 1.10 µF 115
200 VDC .040 µF 403 .730 µF 734
500 VDC .020 µF 203 .250 µF 254
H04
W
H
T
S
LD
.400 max.
.400 max.
.200 max.
.200 nom.
.020 nom.
(10.2 max.)
(10.2 max.)
(5.08 max.)
(5.08 nom.)
(.510 nom.)
25 VDC .120 µF 124 5.10 µF 515
50 VDC .100 µF 104 4.10 µF 415
100 VDC .082 µF 823 2.70 µF 275
200 VDC .050 µF 503 1.80 µF 185
500 VDC .030 µF 303 .670 µF 674
H05
W
H
T
S
LD
.500 max.
.500 max.
.200 max.
.400 nom.
.025 nom.
(12.7 max.)
(12.7 max.)
(5.08 max.)
(10.2 nom.)
(.635 nom.)
25 VDC .240 µF 244 8.70 µF 875
50 VDC .200 µF 204 7.20 µF 725
100 VDC .180 µF 184 4.80 µF 485
200 VDC .110 µF 114 3.30 µF 335
500 VDC .070 µF 703 1.10 µF 115
H06
W
H
T
S
LD
.870 max.
.600 max.
.200 max.
.790 nom.
.032 nom.
(22.1 max.)
(15.2 max.)
(5.08 max.)
(20.1 nom.)
(.813 nom.)
25 VDC .750 µF 754 22.0 µF 226
50 VDC .620 µF 624 17.0 µF 176
100 VDC .560 µF 564 13.0 µF 136
200 VDC .360 µF 364 8.00 µF 805
500 VDC .240 µF 244 2.90 µF 295
31
www.johansondielectrics.com
W
H
T
S Meniscus
Height
.050" Max
NOTE: Lead lengths are typically 1.25” for orders in bulk packaging. Leads are typically
1.00” for tape and reel packaging. Tape and reel packaging comes in 1000 piece reels.
SWITCH-MODE RADIAL LEADED CAPACITORS
HOW TO ORDER SWITCH-MODE RADIALS
Part number written: 201H07W105KQ4
201 H07 W 105 K Q 4 T
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
250 = 25 V
500 = 50 V
101 = 100 V
201 = 200 V
501 = 500 V
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
101 = 100 pF
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ± 5%
K = ± 10%
M = ± 20%
Z = +80% -20%
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
T = Tape and Reel
H = High Rel Testing
per customer
requirements
S = Special Part
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H07
W
H
T
S
LD
1.10 max.
.600 max.
.200 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(5.08 max.)
(24.9 nom.)
(.813 nom.)
25 VDC
.680 µF 684 35.0 µF 356
50 VDC
.560 µF 564 28.0 µF 286
100 VDC
.470 µF 474 19.0 µF 196
200 VDC
.330 µF 334 13.0 µF 136
500 VDC
.200 µF 204 4.60 µF 465
H08
W
H
T
S
LD
1.10 max.
.600 max.
.350 max.
.980 nom.
.032 nom.
(27.9 max.)
(15.2 max.)
(8.89 max.)
(24.9 nom.)
(.813 nom.)
25 VDC
1.20 µF 125 70.0 µF 706
50 VDC
1.10 µF 115 56.0 µF 566
100 VDC
.820 µF 824 37.0 µF 376
200 VDC
.470 µF 474 26.0 µF 266
500 VDC
.300 µF 304 8.70 µF 875
H09
W
H
T
S
LD
.670 max.
.540 max.
.200 max.
.575 nom.
.025 nom.
(17 max.)
(13.7 max.)
(5.08 max.)
(14.6 nom.)
(.635 nom.)
25 VDC
.450 µF 454 13.0 µF 136
50 VDC
.360 µF 364 10.0 µF 106
100 VDC
.330 µF 334 7.20 µF 725
200 VDC
.240 µF 244 5.00 µF 505
500 VDC
.180 µF 184 1.70 µF 175
H10
W
H
T
S
LD
.930 max.
.720 max.
.250 max.
.800 nom.
.032 nom.
(23.6 max.)
(18.3 max.)
(6.35 max.)
(20.3 nom.)
(.813 nom.)
25 VDC
1.00 µF 105 38.0 µF 386
50 VDC
.900 µF 904 30.0 µF 306
100 VDC
.750 µF 754 20.0 µF 206
200 VDC
.470 µF 474 14.0 µF 146
500 VDC
.300 µF 304 5.80 µF 585
32
www.johansondielectrics.com
HIGH VOLTAGE RADIAL LEADED CAPACITORS
KEY FEATURES
• Rated Working Voltages from 25 to 5000 VDC
• Rugged Epoxy Coating Offers Increased Protection
• Compact MLC Designs Smaller Than Film or Disc
• NEW 200°C & 250°C Versions Available for Oil &
Geophysical Tool, Aircraft Engine Control Applications
• DSCC Drawing & Other Screened Versions Available
ADVANTAGES
• Power Supplies • Surge Protection
• Voltage Multipliers • Industrial Control Circuits
• Data Isolation • Custom Applications
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H42
W
H
T
S
LD
0.250 Max
0.220 Max
0.270 Max
0.170 ±0.03
0.025 ±.002
(6.35 Max)
(5.59 Max)
(6.86 Max)
(4.32 ±0.76)
(0.64 ±0.05)
500 VDC 4700 pF 472 .150 µF 154
1000 VDC 1500 pF 152 .055 µF 553
2000 VDC 680 pF 681 9000 pF 902
3000 VDC 330 pF 331 2800 pF 282
4000 VDC 150 pF 151 630 pF 631
5000 VDC 100 pF 101 550 pF 531
H47
W
H
T
S
LD
0.370 Max
0.300 Max
0.270 Max
0.275 ±0.03
0.025 ±.002
(9.40 Max)
(7.62 Max)
(6.86 Max)
(6.99 ±0.76)
(0.64 ±0.05)
500 VDC .022 µF 223 .480 µF 484
1000 VDC 3300 pF 332 .170 µF 174
2000 VDC 1500 pF 152 .025 µF 253
3000 VDC 680 pF 681 .011 µF 113
4000 VDC 330 pF 331 1800 pF 182
5000 VDC 220 pF 221 940 pF 941
H51
W
H
T
S
LD
0.470 Max
0.400 Max
0.320 Max
0.375 ±0.03
0.025 ±.002
(12.0 Max)
(10.2 Max)
(8.13 Max)
(9.53 ±0.76)
(0.64 ±0.05)
500 VDC .056 µF 563 1.20 µF 125
1000 VDC 4700 pF 472 .450 µF 454
2000 VDC 3300 pF 332 .094 µF 943
3000 VDC 1500 pF 152 .043 µF 433
4000 VDC 1000 pF 102 .010 µF 103
5000 VDC 470 pF 471 4900 pF 492
H62
W
H
T
S
LD
0.570 Max
0.500 Max
0.320 Max
0.475 ±0.03
0.025 ±.002
(14.5 Max)
(12.7 Max)
(8.13 Max)
(12.1 ±0.76)
(0.64 ±0.05)
500 VDC .100 µF 104 2.20 µF 225
1000 VDC .010 µF 103 .804 µF 804
2000 VDC 6800 pF 682 .240 µF 244
3000 VDC 3300 pF 332 .073 µF 733
4000 VDC 2200 pF 222 .028 µF 283
5000 VDC 1000 pF 102 .013 µF 133
H66
W
H
T
S
LD
0.670 Max
0.600 Max
0.320 Max
0.575 ±0.03
0.025 ±.002
(17.0 Max)
(15.2 Max)
(8.13 Max)
(14.6 ±0.76)
(0.64 ±0.05)
500 VDC .150 µF 154 3.30 µF 335
1000 VDC .015 µF 153 1.20 µF 125
2000 VDC .010 µF 103 .440 µF 444
3000 VDC 4700 pF 472 0.130 µF 134
4000 VDC 3300 pF 332 .041 µF 413
5000 VDC 2200 pF 222 .020 µF 203
33
www.johansondielectrics.com
HIGH VOLTAGE RADIAL LEADED CAPACITORS
HOW TO ORDER HIGH VOLTAGE RADIALS
Part number written: 102H42W101KQ4
102 H42 W 101 K Q 4
VOLTAGE SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
501 = 500 V
102 = 1000 V
202 = 2000 V
302 = 3000 V
402 = 4000 V
502 = 5000 V
See Chart
N = NP0
W = X7R
1st two digits are
significant; third digit
denotes number of
zeros.
102 = 1000 pF
103 = 0.01 µF
105 = 1.00 µF
J = ± 5%
K = ± 10%
M = ± 20%
Z = +80% -20%
Q = Leaded &
Encapsulated
4 = Standard
3 = Specified
T = Tape and Reel
H = High Rel Testing
per customer
requirements
S = Special Part
W
H
T
S Meniscus
Height
.050" Max
NOTE: Lead lengths are
typically 1.25” for orders in
bulk packaging. Leads are
typically 1.00” for tape and
reel packaging. Tape and
reel packaging comes in
1000 piece reels.
T-SERIES 200°C & 250°C
Johanson also offers two different series of high temperature radial leaded
capacitors for 200°C and 250°C. These components feature rugged premolded
cases with Hi-Temp epoxy fill. The 200°C line is offered in voltage ratings
of 25V to 4KV and maximum capacitance loss of -0.5% in NP0 and -45% in
X7R. The 250°C line is offered in voltage ratings of 50V & 100V with maximum
capacitance loss of -1.5% in NP0 and -55% in X7R. Please visit our website
for complete component selection & specifications
APPLICATIONS
• Oil Well Logging (Downhole)
• Geophysical Probes
• Jet Engine Controls
CASE SIZE
RATED
VOLTAGE
NP0 CAPACITANCE (MAX.) X7R CAPACITANCE (MAX.)
IN. (MM) VALUE CODE VALUE CODE
H70
W
H
T
S
LD
0.770 Max
0.720 Max
0.320 Max
0.675 ±0.03
0.025 ±.002
(19.6 Max)
(18.3 Max)
(8.13 Max)
(17.1 ±0.76)
(0.64 ±0.05)
500 VDC
.220 µF 224 5.70 µF 575
1000 VDC
.022 µF 223 2.10 µF 215
2000 VDC
.015 µF 153 .620 µF 624
3000 VDC
6800 pF 682 .190 µF 194
4000 VDC
4700 pF 472 .054 µF 543
5000 VDC
3300 pF 332 .026 µF 263
H72
W
H
T
S
LD
0.870 Max
0.750 Max
0.320 Max
0.775 ±0.03
0.025 ±.002
(22.1 Max)
(19.1 Max)
(8.13 Max)
(19.7 ±0.76)
(0.64 ±0.05)
500 VDC
.330 µF 334 7.30 µF 735
1000 VDC
.100 µF 104 2.80 µF 285
2000 VDC
.056 µF 563 .800 µF 804
3000 VDC
.033 µF 333 .250 µF 254
4000 VDC
.010 µF 103 .080 µF 803
5000 VDC
6800 pF 682 .041 µF 413
H80
W
H
T
S
LD
1.450 Max
0.720 Max
0.320 Max
1.375 ±0.03
0.025 ±.002
(36.8 Max)
(18.3 Max)
(8.13 Max)
(34.9 ±0.76)
(.064 ±0.05)
500 VDC
.470 µF 474 12.0 µF 126
1000 VDC
.150 µF 154 4.60 µF 465
2000 VDC
.082 µF 823 1.20 µF 125
3000 VDC
.047 µF 473 .390 µF 394
4000 VDC
.015 µF 153 .130 µF 134
5000 VDC
.010 µF 103 .068 µF 683
34
www.johansondielectrics.com
PLANAR CAPACITOR ARRAYS FOR EMI FILTERING
Johanson Dielectrics is the premier supplier of Planar Capacitor
EMI Filter Arrays to the Filtered Connector Industry.
Planar Capacitors are the fundamental building block for filtered
connectors in Aerospace, Biomedical, Military, Satellite, Indus-
trial and Communication electronics.
Johanson offers high value Arrays in standard and custom solu-
tions to fit your needs.
CIRCULAR ARRAYS
PHYSICAL
LAYOUT
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
WORKING
VOLTAGE
DWV
VOLTAGE
MIL-1560
X7R
&
NP0
47 pF
to
800 nF
Up to
2,000
VDC
Up to
3,000
VDC
MIL-1554
MIL-1669
MIL-1651
MIL-1698
MIL-33702
MIL-AUDIO
RECTANGULAR ARRAYS (ARINC 404/600)
PHYSICAL
LAYOUT
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
WORKING
VOLTAGE
DWV
VOLTAGE
AR-010
Through
AR-150
X7R
&
NP0
47 pF
to
940 nF
Up to
1,330
VDC
Up to
2,000
VDC
D-SUBMINATURE RECTANGULAR ARRAYS
PHYSICAL
LAYOUT
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
WORKING
VOLTAGE
DWV
VOLTAGE
Full Size
X7R
&
NP0
47pF - 210nF ≤ 2,400 ≤ 3,600
Mini-D 47pF - 100nF ≤ 1,000 ≤ 1,500
Micro-D 47pF - 22.5nF ≤ 680 ≤ 1,020
Nano-D 47pF - 3.0nF ≤ 200 ≤ 500
Combo-D 47pF - 6.0nF ≤ 800 ≤ 1,200
Power-D 47pF - 120nF ≤ 680 ≤ 1,020
Special 47pF - 50nF ≤ 300 ≤ 750
35
www.johansondielectrics.com
CUSTOM ARRAYS
Johanson Dielectrics’s design expertise and CNC manufactur-
ing process enable broad custom array capability. Many shapes,
configurations and geometries are possible. Share your require-
ments and we will create a solution!
DISCOIDAL CAPACITORS
JOHANSON Discoidal Feed-through Capacitors are the functional ele-
ment in widely used EMI feed-through filters. This capacitor configuration
offers very low impedance and inductance. Discoidal capacitors are ideal
for by-pass, filtering, coupling, single line EMI/RFI suppression, and high
frequency applications.
• Capacitance values from 10 pF to 11.2 μF
• Test standards and procedures per MIL-STD-202 and MIL-C-123
• Voltage ratings from 50 to 3000 VDC and 50 to 240 VAC
• Low ESR and ESL, non-polar designs
Call us to discuss your special requirements!
NOMINAL
O.D. (IN.)
DIELECTRIC
MATERIAL
AVAILABLE
CAPACITANCE
INSIDE
DIAMETER (IN.) THICKNESS (IN.) RATED VOLTAGE
0.100 ±.005
X7R
&
NP0
10 pF – 66 nF 0.025 ±0.048 0.025 ±0.070 Up to 200 VDC
0.150 ±.005 10 pF – 200 nF 0.037 ±0.058 0.025 ±0.070 Up to 200 VDC
0.335 ±.005 10 pF – 2.8 µF 0.034 ±0.088 0.040 ±0.110 Up to 500 VDC
0.345 ±.005 10 pF – 6.0 µF 0.040 ±0.085 0.055 ±0.110 Up to 750 VDC
0.376 ±.005 10 pF – 8.0 µF 0.050 ±0.075 0.065 ±0.125 Up to 750 VDC
0.643 ±.005 10 pF – 15 µF 0.063 ±0.080 0.055 ±0.150 Up to 750 VDC
0.840 ±.005 10 pF – 20 µF 0.050 ±0.075 0.080 ±0.130 Up to 1000 VDC
I.D.
O.D.
Termination
Ceramic
Internal
Electrodes
PLANAR CAPACITOR ARRAYS FOR EMI FILTERING
36
www.johansondielectrics.com
KEY FEATURES
• Integrated Capacitance in The Substrate
• Rated Working Voltages from 50V to 5,000V
• Temperature ranges: -55°C to 125°C (specials to 200°C and 250°C)
• Compact Designs Utilizing Military Grade Ceramics
• Custom Sizes, Values, and Voltages Available
Johanson CapStrate
®
products integrate bulk capaci-
tance into a ceramic substrate eliminating large discrete
capacitive components which saves critical space and
simplifies the assembly process. Our design and manu-
facturing expertise in large format, custom geometries
provides innovative solutions that economically solve a
wide variety of your design challenges.
SIZE / CAPACITANCE CAPABILITY EXAMPLES
SUBSTRATE SIZE LENGTH WIDTH THICK
NP0
50V
NP0
100V
NP0
200V
NP0
500V
X7R
50V
X7R
100V
X7R
200V
X7R
500V
CapStrate 4 In
0.400 0.400 0.120 0.22µF 0.15µF 0.12µF 0.07µF 9.0µF 6.0µF 3.0µF 1.5µF
mm
10.2 10.2 3.1
CapStrate 3 In
0.450 1.00 0.120 0.70µF 0.50µF 0.39µF 0.22µF 28.0µF 20.0µF 9.0µF 4.7µF
mm
11.43 25.4 3.1
CapStrate 1 In
0.450 2.00 0.120 1.40µF 1.00µF 0.75µF 0.44µF 50.0µF 40.0µF 18.0µF 9.4µF
mm
11.4 50.8 3.1
CapStrate 2 In
0.800 1.50 0.120 2.00µF 1.40µF 1.00µF 0.60µF 75.0µF 55.0µF 25.0µF 14.0µF
mm
20.3 38.1 3.1
CapStrate 6 In
1.250 2.00 0.120 4.00µF 2.80µF 2.00µF 1.20µF 150.0µF 110.0µF 50.0µF 28.0µF
mm
31.8 50.8 3.1
Circular CapStrate® Capacitance Formula 1.3 -1.6
µF / In2
0.9 -1.1
µF / In2
0.7 -0.8
µF / In2
50 - 62 µF
/ In2
35 - 45 µF
/ In2
18 - 20 µF
/ In2
1.3 -1.6
µF / In2
9 -10
µF / In2
This chart is intended to provide capability examples. Not all possibilities are shown and we invite application specific inquiries. Circular
CapStrate
®
example lists available capacitance per area.
CAPSTRATE
®
CAPACITOR SUBSTRATES
ADVANTAGES
• Major Size & Weight Reduction
• Fewer Solder Joints
• Lower Assembly Cost
• Circuit Assembly Available
Discrete
Circuit
CapStrate®
Circuit
37
www.johansondielectrics.com
CUSTOM CAPACITOR SOLUTIONS
Johanson’s extensive experience in design and
manufacture of large format, custom geome-
tries allows us to develop unique and innovative
solutions which successfully solve a wide vari-
ety of our customer’s design challenges.
We’ll work pro actively with you to fully under-
stand your requirements and recommend the
best solution possible.
KEY FEATURES
• Custom shapes to fit specific requirements
• Multiple capacitors in a single assembly
• NP0/COG and X7R solutions from -55°C to +125°C
• Multiple pin, lead-frame, and flying wire options
• Bare ceramic, epoxy coated, potted solutions
VARIABLE PITCH ASSEMBLIES
Another custom approach is our variable pitch
design. No longer are you limited to a vendor’s
standard catalogue offering or only square or
rectangular custom designs. We let you be-
come your own capacitor designer by not only
telling us the desired capacitance and voltage,
but also the size, shape, and location of leads!
This process helps insure that the resulting
capacitor satisfies every aspect of your design
requirements.
38
www.johansondielectrics.com
CAPACITOR PACKAGING
Johanson capacitors are available taped per EIA
standard 481. Tape options include 7” and 13”
diameter reels. Johanson uses high quality, dust free,
punched 8mm paper tape and plastic embossed 8mm
tape for thicker MLCCs. Quantity per reel ranges are
listed in the tables below and are dependent on chip
thickness.
1.97 min.
(50.0) .510±.020
(13±0.5)
.33+.059-0.0
(8.4+1.5-0.0) .488+.078-0.0
(12.4+2.0-0.0)
or
.079±.020
(2.0±0.5)
7.0±.079
(178±2.0) 13.0±.079
(330±2.0)
.083±.020
(21±0.5)
or
Bo
Cover Tape
Embossed Tape 8mm Width; 4mm or 2mm Pitch
Sproket Holes
Width
.315±.008
(8.0±0.2)
.157±.004
(4.0±0.1)
.059+.004-0.0
(1.5+0.1-0.0)
Pitch = .157±.004 (4.0±0.1)
or .079±.004 (2.0±0.1)
Pitch = .314±.004 (8.0±0.1)
or .157±.004 (4.0±0.1)
.083 max.
(2.1)
.012±.004
(0.3±0.1)
.067±.004
(1.7±0.1)
.138±.002
(3.5±0.05)
Ao
.079±.002
(2.0±0.05)
Feed Direction
.055
max.(1.2)
Punched Tape
Embossed Tape 12mm Width; 8mm or 4mm Pitch Punched Tape
Cover Tape
.098 max.
(2.5)
Sproket Holes
Width
.472±.008
(12.0±0.2)
.157±.004
(4.0±0.1)
.059+.004-0.0
(1.5+0.1-0.0)
.012±.004
(0.3±0.1)
.220±.004
(5.5±0.1)
Ao
.079±.002
(2.0±0.05)
Bo
.067±.004
(1.7±0.1)
P/N 500R07N100JV4E
Lot # 010-9999
S.O. # F03456
M.O. # MO12678
7” DIAMETER REEL 13” DIAMETER REEL
COMPONENT REEL QTY TAPE TYPE WIDTH / PITCH CODE REEL QTY TAPE TYPE WIDTH / PITCH CODE
R05 / 0201 MLCC
15000 Paper 8mm/2mm T N/A N/A N/A
R07 / 0402 MLCC
10000 Paper 8mm/2mm T N/A N/A N/A
R14 / 0603 MLCC
4000 Paper 8mm/4mm T 10000 Paper 8mm/4mm R
R15 / 0805 MLCC
4000 / 3000 Paper / Embossed 8mm/4mm T / E 10000 Paper / Embossed 8mm/4mm R / U
R18 / 1206 MLCC
4000 / 3000 Paper / Embossed 8mm/4mm T / E 10000 Paper / Embossed 8mm/4mm R / U
S41 / 1210 MLCC
2000 - 4000 Embossed 8mm/4mm E 5000-10000 Embossed 8mm/4mm U
R29 / 1808 MLCC
2000 Embossed 12mm/4mm E 5000 - 8000 Embossed 12mm/4mm U
R30 / 2211 MLCC
1000 - 2000 Embossed 12mm/4mm E 2000 - 5000 Embossed 12mm/4mm U
S43 / 1812 MLCC
500 - 1000 Embossed 12mm/8mm E 3000 - 5000 Embossed 12mm/8mm U
S47 / 2220 MLCC
250 - 1000 Embossed 12mm/8mm E 2000 - 5000 Embossed 12mm/8mm U
S49 / 1825 MLCC
250 - 1000 Embossed 12mm/8mm E 2000 - 4000 Embossed 12mm/8mm U
S48 / 2225 MLCC
250 - 1000 Embossed 12mm/8mm E 2000 - 4000 Embossed 12mm/8mm U
X07 / 0402 X2Y
4000 Paper 8mm/2mm T 10000 Paper 8mm/2mm R
X14 / 0603 X2Y
4000 Paper 8mm/4mm T 10000 Paper 8mm/4mm R
X15 / 0805 X2Y
4000 Embossed 8mm/4mm E 10000 Embossed 8mm/4mm U
X18 / 1206 X2Y
3000 - 4000 Embossed 8mm/4mm E 10000 Embossed 8mm/4mm U
X41 / 1210 X2Y
2000 - 3000 Embossed 8mm/4mm E
X44 / 1410 X2Y
1000 - 2000 Embossed 8mm/4mm E
X43 / 1812 X2Y
1000 Embossed 12mm/8mm E
Actual reel quantities based on part thickness and tape type. Contact sales for reel quantities of specific part numbers.
39
www.johansondielectrics.com
PARAMETER NP0 X7R X5R
TEMPERATURE
COEFFICIENT:
0± 30 ppm/°C -55 to +125°C ± 15% -55 to +125°C ± 15% -55 to +85°C
-55°C -25°C0°C25°C50°C75°C 100°C 125°C
-80%
-60%
-40%
-20%
0%
20%
-55°C -25°C0°C25°C50°C75°C 100°C 125°C
-80%
-60%
-40%
-20%
0%
20%
-55°C -25°C0°C25°C50°C75°C 100°C 125°C
-80%
-60%
-40%
-20%
0%
20%
DISSIPATION
FACTOR:
.001 (0.1%) max WVDC ≥ 50 VDC, DF = 2.5% max
WVDC = 25 VDC, DF = 3.0% max
WVDC = 16 VDC, DF = 3.5% max
For Vrated ≥ 50 VDC, DF = 5% max
For Vrated ≤ 25 VDC: DF = 10% max
AGING:
None 2.5% / decade hour 2.5 % / decade hour
INSULATION
RESISTANCE:
1000ΩF or 100GΩ
whichever is less @ 25°C, WVDC
500ΩF or 50GΩ
whichever is less @ 25°C, WVDC
100ΩF or 10GΩ
whichever is less @ 25°C, WVDC
DIELECTRIC
STRENGTH:
For Vrated = 6 - 200 VDC, DWV = 2.5 X WVDC, 25°C, 50mA max.
For Vrated = 201 - 499 VDC, DWV = 2.0 X WVDC, 25°C, 50mA max.
For Vrated = 500 - 999 VDC, DWV = 1.5 X WVDC, 25°C, 50mA max.
For Vrated = 1000+ VDC, DWV = 1.2 X WVDC, 25°C, 50mA max.
DWV = 2.5 X WVDC, 25°C, 50mA
max.
TEST
PARAMETERS:
C > 100 pF; 1kHz ±50Hz;1.0±0.2
VRMS
C ≤ 100 pF 1Mhz ±50kHz; 1.0±0.2
VRMS
1kHz ±50Hz;1.0±0.2 VRMS 1kHz ±50Hz; 0.5±0.2 VRMS
NOTES:
Tanceram IR = 100 ΩF or 10 GΩ
Tanceram DF for Vrated ≥ 50 VDC = 5% max.
Tanceram DF for Vrated ≤ 25 VDC, DF = 10% max
ELECTRICAL CHARACTERISTICS
PART NUMBER BREAKDOWN - SURFACE MOUNT
Part number written: 502R29W102KV3E-****-SC
502 R 29 W 102 K V 3E
VOLTAGE SERIES/SIZE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION MARKING PACKING
6R3 = 6.3 V DC
100 = 10 V DC
160 = 16 V DC
250 = 25 V DC
500 = 50 V DC
101 = 100 V DC
201 = 200 V DC
251 = 250 V DC
301 = 300 V DC
501 = 500 V DC
631 = 630 V DC
102 = 1000 V DC
202 = 2000 V DC
302 = 3000 V DC*
402 = 4000 V DC
502 = 5000 V DC*
ACJ = 250 VAC
* For Safety Caps
with -****-SC
P/N suffix only:
302 = 250VAC
[2500V Impulse]
502 = 250VAC
[5000V Impulse]
A_ _ = ARRAY
B_ _ = LICC
F_ _ = F-T FILTER
R_ _ = MLCC
S_ _ = MLCC
T_ _ = HI TEMP MLCC
X_ _ = X2Y
_05=0201
_07=0402
_14=0603
_15=0805
_18=1206
_41=1210
_29=1808
_30=2211
_43=1812
_44=1410
_47=2220
_49=1825
_48=2225
N = NP0
W = X7R
X = X5R
1st two digits are
significant; third
digit denotes
number of zeros,
R = decimal.
5R6 = 5.6 pF
100 = 10 pF
102 = 1,000 pF
474 = 0.47 µF
475 = 4.7 µF
106 = 10 µF
* B = ± 0.10 pF
* C = ± 0.25 pF
* D = ± 0.50 pF
* F = ± 1 %
* G = ± 2%
* J = ± 5%
* K = ± 10%
* M = ± 20%
* Y = +50 -20%
* Z = +80 -20%
*Values < 10 pF
only
V = Nickel Barrier
with 100% Tin
Plating (Matte)
F = Polyterm
flexible termination
G = Gold
T = SnPb
P = PdAg
3 = Special
4 = Unmarked
6 = EIA Code*
*Not available
on sizes
≤ 0402
E = Embossed 7”
T = Punched 7”
U = Embossed 13”
R = Punched 13”
No code = bulk
pack
Tape specifications
conform to EIA
RS481
Not all tape styles
are available on all
parts.
-****- SC
PART NUMBER MODIFIER
Used on select parts such as Safety Certified or
for customer specific requirements.
PLEASE NOTE
: Not all combinations of JDI P/Ns are valid. Please refer to the “How to Order” detail section of the specific product or contact
your Sales Representative if you need assistance.
UNITED STATES:
HEADQUARTERS
15191 Bledsoe St.,
Sylmar, California 91342
TEL (818) 364 9800 • FAX (818) 364 6100
http://www.johansondielectrics.com
EUROPE:
JOHANSON EUROPE, LTD.
Flackwell Heath,
Bucks, England HP10 9NR
TEL +44 1628 531154 • FAX +44 1628 532703
eurosales@johansondielectrics.com
HONG KONG:
JOHANSON HONG KONG, LTD.
Unit E, 11/F., Phase 1 Kaiser Estate
41 Man Yue St., Hunghom
Kowloon, Hong Kong
TEL +852 2334 6310 • FAX +852 2334 8858
asiasales@johansondielectrics.com
© 2015 Publication JD072115
Your Technology Partner
High Voltage AC Safety
X2Y High Capacitance
High Temperature AC Power
Feedthru Filter Low ESL
SMPS Radial Leaded
Planar Arrays Custom Solutions