1
200HF(R) SERIES
Stud VersionSTANDARD RECOVERY DIODES
200 A
Bulletin I2020 rev. A 07/94
www.irf.com
Features
High current carrying capability
High surge current capability
Types up to 1200V VRRM
Stud cathode and stud anode version
Standard JEDEC types
Diffused junction
T ypical Applications
Battery chargers
Converters
Power supplies
Machine tool controls
case style
DO-205AC (DO-30)
IF(AV) 200 A
@ TC125 °C
IF(RMS) 314 A
IFSM @ 50Hz 4400 A
@ 60Hz 4610 A
I2t@
50Hz 97 KA2s
@ 60Hz 88 KA2s
VRRM range 400 to 1200 V
TJ-40 to 180 °C
Parameters 200HF(R) Units
Major Ratings and Characteristics
200HF(R) Series
2
Bulletin I2020 rev. A 07/94
www.irf.com
Voltage VRRM , maximum repetitive VRSM , maximum non- IRRM max.
Type number Code peak reverse voltage repetitive peak rev. voltage @ 180°C
VVmA
40 400 500
200HF(R) 80 800 900 15
120 1200 1300
IF(AV) Max. average forward current 20 0 A 180° conduction, half sine wave
@ Case temperature 125 °C
IF(RMS) Max. RMS forward current 31 4 A DC @ 120°C case temperature
IFSM Max. peak, one-cycle forward, 4400 t = 10ms No voltage
non-repetitive surge current 4610 t = 8.3ms reapplied
3700 t = 10ms 100% VRRM
3870 t = 8.3ms reapplied Sinusoidal half wave,
I2t Maximum I2t for fusing 97 t = 10ms No voltage Initial TJ = TJ max
88 t = 8.3ms reapplied
68 t = 10ms 100% VRRM
62 t = 8.3ms r eapplied
I2√t Maximum I2√t for fusing 968 KA2√s t = 0.1 to 10ms, no voltage reapplied
VF(TO)1 Low level value of threshold
voltage
VF(TO)2 High level value of threshold
voltage
rf1 Low level value of forward
slope resistance
rf2 High level value of forward
slope resistance
VFM Max. forward voltage drop 1.45 V Ipk= 628A, TJ = 25 °C
Parameter 200HF(R) Units Conditions
Forward Conduction
0.85 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
1.04 (I > π x IF(AV)), TJ = TJ max.
0.85 (16.7% x π x IF(AV) < I < π x IF(AV)), TJ = TJ max.
0.59 (I > π x IF(AV)), TJ = TJ max.
KA2s
A
V
mΩ
ELECTRICAL SPECIFICATIONS
Voltage Ratings
200HF(R) Series
3
Bulletin I2020 rev. A 07/94
www.irf.com
Parameter 200HF(R) Units Conditions
°C
TJMax. operating temperature range -40 to 180
Tstg Max. storage temperature range -55 to 180
RthJC Max. thermal resistance, junction to case 0.17 DC operation
RthCS Max. thermal resistance, case to heatsink 0.08 Mounting surface, smooth, flat and greased
T Max. allowed mounting torque +0 -20% 11 Not lubricated threads
10 Lubricated threads
wt Approximate weight 120 g
Case style DO-205AC(DO-30) See Outline Table
K/W
Nm
Thermal and Mechanical Specification
∆RthJC Conduction
(The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC)
180° 0.045 0.037 TJ = TJ max.
120° 0.056 0.061
90° 0.073 0.079 K/W
60° 0.102 0.105
30° 0.154 0.156
Conduction angle Sinusoidal conduction Rectangular conduction Units Conditions
Ordering Information Table
200 HF R 120 P B V
1234 5 6
Device Code
1- Essential Part Number
2- Diode
3- None = Stud Normal Polarity (Cathode to Stud)
R = Stud Reverse Polarity (Anode to Stud)
4- Voltage code: Code x 10 = VRRM (See Voltage Ratings table)
5-P= Stud base DO-205AC(DO-30) 1/2" 20UNF-2A
M= Stud base DO-205AC(DO-30) M12x1.75
6- B= Flag top terminals (for Cathode/ Anode Leads)
S= Isolated lead with silicone sleeve
(Red = Reverse Polarity; Blue = Normal Polarity)
None = Not isolated lead
7- V= Glass-metal seal
7
200HF(R) Series
4
Bulletin I2020 rev. A 07/94
www.irf.com
Outline Table
DO-205AC (DO-30) Flag
All dimensions in millimeters (inches)
GLASS-METAL SEAL
MAX.
21 ( 0.8 2)
MAX.
16.5 (0.65)
6.5 (0.26) MIN.
DIA. 8.5 (0.33) NOM.
157 (6. 18)
55 (2.16) MIN.
DIA. 23.5 (0.93) MAX.
24 (0.94)
MAX.
SW 27
* FOR METRIC DEVICE: M12 X 1.75
170 (6.69)
1/2"-20UNF-2A*
12.5 ( 0.49)
MAX.
C.S. 16mm
2.6 (0.10) MAX
.
2
35 (1.38)
MAX.
(0.015 s.i.)
MAX.
GLASS-METAL SEAL
MAX.
21 (0.8 2)
MAX.
DIA. 23.5 (0.93) MAX.
24 (0.94 )
12.5 (0.49)
16.5 (0.65)
5.6 (0.22) DIA. 5.54 (0.22)
2.4 (0.09)
27 (1.06)
41 (1. 61) MAX .
9.5 (0.37 )
*FOR METRIC DEVICE. M12 X 1.75
36.5 (1.44 )
1/2"-20UNF-2A*
Conforms to JEDEC DO-205AC (DO-30)
All dimensions in millimeters (inches)
200HF(R) Series
5
Bulletin I2020 rev. A 07/94
www.irf.com
Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics
120
130
140
150
160
170
180
0 25 50 75 100 125 150 175 200 225
30°60° 90° 120° 180°
Average Forward Curr en t (A)
Con duction Angle
Maxi mum A ll owable Case Tem perature (°C)
200HF(R) Series
R (DC) = 0.17 K/W
thJC
110
120
130
140
150
160
170
180
0 50 100 150 200 250 300 350
DC30°60°90°120° 180°
Conduction Pe riod
Maxim um Allow ab le Case Temp era ture (°C)
A verage Fo rward Current (A)
200HF(R) Series
R (DC) = 0.17 K/W
thJC
Fig. 3 - Forward Power Loss Characteristics
0 20 40 60 80 100 120 140 160 180
Max imum Allowabl e Ambien t Temperat ure (°C)
4 K/W
2.5 K/W
1.5 K/W
1 K/W
0.8 K/W
0.6 K/W
0.5 K/W
0.4 K/W
0.3 K/W
0.2 K/W
R = 0.1 K/W - Delta R
thSA
0
50
100
150
200
250
300
0 20 40 60 80 100 120 140 160 180 200
180°
120°
90°
60°
30°
RMS Lim it
C onduction Angle
Maximum Av erag e Forward Po wer Loss (W)
Average Forward Current (A)
200HF(R) Serie s
T = 180°C
J
Fig. 4 - Forward Power Loss Characteristics
0 20 40 60 80 100 120 140 160 180
Maximum Allowable Ambient Temperature (°C)
R = 0.1 K/W - Delta R
thSA
0.2 K/W
0.3 K/W
0.4 K/W
0.5 K/W
0.6 K/W
0.8 K/W
1 K/W
1.5 K/W
4 K/W
2.5 K/W
0
50
100
150
200
250
300
350
400
0 50 100 150 200 250 300 350
DC
180°
120°
90°
60°
30°
RMS Limit
Con duction Period
Maxi mum Average Forward Power Loss (W)
Average Forward Curr ent (A)
200HF(R) Series
T = 180°C
J
200HF(R) Series
6
Bulletin I2020 rev. A 07/94
www.irf.com
Fig. 5 - Maximum Non-Repetitive Surge Current Fig. 6 - Maximum Non-Repetitive Surge Current
1000
1500
2000
2500
3000
3500
4000
110100
Nu m ber Of Eq u al Am pl itu de Half Cycl e Curre nt P ulses (N)
Pe ak Half Sine Wave F orward Cur rent (A)
At Any Rate d Lo ad Condition And W ith
R ated V Ap plied F ollowin g Su rge.
RRM
200HF( R ) Se r ie s
Initial T = 1 80°C
@ 60 Hz 0.0 083 s
@ 50 Hz 0.0 100 s
J
1000
1500
2000
2500
3000
3500
4000
4500
0.01 0.1 1
Pulse Train Duration (s)
Peak Half Sine W ave For ward C ur rent ( A)
Initial T = 180°C
No Vo ltag e Reappl ied
Rated V Reapplied
RRM
Versus Puls e Train Duration.
M a xi mu m N on R ep et itiv e Su r ge Cu rr ent
J
200HF(R) Serie s
Fig. 7 - Forward Voltage Drop Characteristics
10
100
1000
10000
0.5 1 1.5 2 2.5 3 3.5 4 4.5
T = 25°C
J
Instantaneous Forward Volt ag e (V)
Instantaneou s Fo rwa rd Cu rrent (A)
20 0HF(R ) Seri es
T = 180°C
J
Fig. 8 - Thermal Impedance ZthJC Characteristics
0.01
0.1
1
0.001 0.01 0.1 1 10
S qua re Wav e Pul s e Durati o n (s )
thJC
Tr ansi ent Thermal Impe danc e Z (K/W)
Stea dy State Valu e:
R = 0.17 K/W
(DC O perat io n)
thJC
200HF(R) Series
