4 Conductive Polymer Type / Surface Mount Type TH 125 Guaranteed Products (THB/THC/THD/THE series) Series Tantalum Solid Capacitors with Conductive Polymer TH series has 125 capability guaranteed. It is the most suitable for the high reliability industrial equipment. Specifications Items Condition Series Specifications THB - THC THD (V) - 2.5 4.0 6.3 10 2.5 4.0 6.3 10 2.5 4.0 6.3 2.5 4.0 6.3 Surge voltage (V) - 3.2 5.0 8.0 13 3.2 5.0 8.0 13 3.2 5.0 8.0 3.2 5.0 8.0 Category temperature range () - -55 to 125 Capacitance tolerance () 120Hz/20 Rated capacitance range (F) 120Hz/20 Leakage current Characteristics of impedance ratio at high temp. and low temp. M : 20 100 to 1,000 Rated voltage applied, after 5 minutes Please see the attached characteristics list 100kHz/20 Please see the attached characteristics list -55 Z/Z20 60,90 to 95%RH, 500h, No-applied voltage 0.6 to 2.0 C/C Within20% of the initial value DF 2 times the initial limit LC 2 times the initial limit 105, 1,000 cycles, 1k discharge resistance, surge voltage applied Surge C/C Within+50%,-20% of the initial value(2R5THB1000M) Within+40%,-20% of the initial value(Except for the above model) 1.5 times the initial limit DF LC 3 times the initial limit C/C Within5% of the initial value DF The initial limit LC 3 times the initial limit Dimensions Size List RV : Rated voltage RV L F TH Series W Series 2.5 4.0 THC D2 THB D3L THC D2 THE D2E THB H THC D2 THE W1 THB 330 (unit: mm) Size code L 0.31 W 0.2 H 0.12 S 0.2 W1 0.1 D2E 7.3 4.3 1.8 1.3 2.4 D2 7.3 4.3 1.9 1.3 2.4 D3L 7.3 4.3 2.8 1.3 2.4 D4 7.3 4.3 3.8 1.3 2.4 D4D 7.3 4.3 3.6 1.3 2.4 1 0.2:D2 1 0.2:D3L,D4,D4D 10 68 220 S 6.3 100 150 S 150 to 330 0.6 to 2.0 125 Z/Z20 125, 1,000h, category voltage applied Damp heat (Steady State) 330 to 680 Please see the attached characteristics list 100kHz/+20 Endurance 68 to 220 120Hz/20 Equivalent series resistance (ESR) 172 THE Rated voltage Dissipation Factor (DF) SMD Type RoHS compliance 470 680 1000 D3L D4 D4 D4 D2 D2E D3L D3L THD D4D THE D2E THB D3L THD D4 D4D THB D4 THD D4D THB D4 D4 4 Conductive Polymer Type / Surface Mount Type RoHS compliance TH Series Characteristics List Series ESR Maximum allowable LC Rated Rated Rated Category Category MSL DF Size SANYO ripple current Reflow Reflow (A) Voltage Temperature Capacitance Voltage Temperature (mmax) (mArms) (%max) code Part number Temp. (V) (C) (F) (V) (C) max/5min. 100kHz/20C 100kHz1 Temp. 260C 250C 10 6.3 4.0 2.5 2.5 10 10 6.3 6.3 4.0 2.5 2.5 10.0 6.3 4.0 2.5 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 100 220 330 470 330 330 220 470 330 680 1000 680 68 150 220 220 6.3 4.0 2.5 1.6 1.6 6.3 6.3 4.0 4.0 2.5 1.6 1.6 6.3 4.0 2.5 1.6 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 8.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 10.0 15.0 15.0 10.0 10.0 10.0 10.0 10.0 100.0 138.6 132.0 117.5 82.5 330.0 220.0 296.1 207.9 272.0 250.0 170.0 68.0 94.5 88.0 55.0 6.3 105 150 4.0 125 10.0 94.5 4.0 105 220 2.5 125 10.0 88.0 2.5 105 330 1.6 125 10.0 82.5 6.3 4.0 2.5 105 105 105 330 470 680 4.0 2.5 1.6 125 125 125 10.0 10.0 10.0 207.9 188.0 170.0 Please refer to page 141 for the compensation coefficient of maximum allowable ripple current. 55 40 40 40 55 35 40 35 40 35 30 40 45 40 40 45 25 18 25 18 15 25 18 15 10 10 10 1900 2000 2000 2000 1900 3000 3000 3000 3000 3000 3000 3000 1700 1900 1900 1700 2400 2800 2400 2800 3100 2400 2800 3100 4400 4400 4400 Tantalum Solid Capacitors with Conductive Polymer 10THB100ML 6THB220ML D3L 4THB330ML 2R5THB470ML 2R5THB330ML 10THB330M THB 10THB220M 6THB470M D4 6THB330M 4THB680M 2R5THB1000M 2R5THB680M 10THC68M 6THC150M THC D2 4THC220M 2R5THC220M 6THE150M 6THE150MI 4THE220M 4THE220MI THE D2E 4THE220MF 2R5THE330M 2R5THE330MI 2R5THE330MF 6THD330M THD D4 4THD470M 2R5THD680M Under evaluation 5 1 100k to 500kHz,45C SMD Type TH Series 173