FEDR27T3202F-002-04
MR27T3202F / P2ROM
10/10
NOTICE
No copying or reproduction of this document, in part or in whole, is permitted without the consent of LAPIS
Semiconductor Co., Ltd .
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing LAPIS Semiconductor's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications, which can be
obtained from LAPIS Semiconductor upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the
standard usage and operations of the Products. The peripheral conditions must be taken into account when
designing circuits for mass production.
Great care was taken in ensuring the accuracy of the informatio n specified in this document. However, should
you incur any damage arising from any inaccuracy or misprint of such information, LAPIS Semiconductor shall
bear no responsibility for such d amage.
The technical information specified herein is intended only to show the typical functions of and examples of
application circuits for the Products. LAPIS Semiconductor does not grant you, explicitly or implicitly, any
license to use or exercise intellectual property or other rights held by LAPIS Semiconductor and other parties.
LAPIS Semiconductor shall bear no responsibility whatsoever for any dispute arising from the use of such
technical information.
The Products specified in this document are intended to be used w ith general-use electronic equipment or dev ices
(such as audio visual equipment, office-automation equipment, communication devices, electronic appliances
and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While LAPIS Semiconductor always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the
possibility of physical i nj ury, fire or any other damage caused in the event of the failure of any Product, such as
derating, redundancy, fire control and fail-safe designs. LAPIS Semiconductor shall bear no responsibility
whatsoever f or y our use of any Product ou ts ide of th e pres cribed scope or not in accordan ce with the instruction
manual.
The Products are not des ign ed or m anuf actured to be u s ed with any equipm ent, devi ce or sys tem which requ ires
an extremely high level of reliabilit y the failure or malfunctio n of which may result in a direct threat to huma n
life or create a risk of human injury (such as a medical instrument, transportation equipment, aerospace
machinery, nuclear-reactor controller, fuel-controller or other safety device). LAPIS Semiconductor shall bear
no responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended
to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you int end to ex port or s h ip ov ers eas any Produ ct or t ech n ology specifi ed h erei n that may be con t roll ed un der
the Foreign Exchange and the Fo reign Trad e Law, you will be required to obtain a license or permit under the
Law.
Copyright 2004 - 2012 LAPIS Semiconductor Co., Ltd.