TINI Q-G® MINIATURE CONNECTORS

U.S. Patent No. 4,361,375, 4,316,647, 4,921,431

Series TA(*)F, TA(*)FB, TA(*)FL and TA(*)FLB -

Straight female cord plug --- View Assembly Instructions

Series TA(*)M, TA(*)MB,TA(*)ML and TA(*)MLB -

Straight male cord plug --- View Assembly Instructions

Series TB(*)M and TB(*)MB - Chassis/panel mount

male receptacle

Series TY(*)F and TY(*)FPC - Chassis/panel, female

finish for use on camera or where reflected light is a problem. Disconnecting plugs from

lavaliere or clip-on mikes is quick and easy...press the release button and pull the plug free.

Either shielded or unshielded cables can be used up to 0.115 inches (2.92 mm) in diameter

(standard). Cable shield may either be connected to a pin/contact through circuit or may be

connected to the cable clamp strain relief. This alternate connection permits using the metal

housings of plugs to completely shield internal connections and pins/contacts.

1 P.C. board termination is recommended alternate method

the most demanding compact connections in industrial, R and D and production instrumentation

of all kinds. The 4, 5, and 6-pin/contact versions are especially suited to multi-circuit

connections.

DESIGN FEATURES

Designed for light weight and unobtrusiveness. Also available in conductive black chrome

finish.

Contacts and terminals are precision formed and plated for intimate contact and low resistance

connections. Terminal numbers are molded on rear of male insert and on face of female insert

for easy identification (except 6-pin male insert). Inserts can be supplied for OEM installation in

microphones and instrumentation for optimum connecting reliability. For cord plugs, inserts can

also be supplied for replacements.

transfer of shielding connection between housing, combined with simple, easy fingertip release.

STRAIN RELIEF - Rugged internal clamp holds cable tightly, while making a secure, low

resistance connection between cable shield and housing.

FLEX RELIEF - Protects by minimizing cable bending stress at point of cable entry.

"SCOOP-PROOF" FEATURE - Fully recessed pins on

male plugs and receptacles cannot be "scooped", bent or damaged by accidental mismating with

mating connector.

COLOR ESCUTCHEONS - Attractive color escutcheons, Series TYEF, are recommended for

use with Series TY(*)F and TY(*)FPC receptacles (when rear mounted) for attractive panel

trim, as well as color coding one or more connectors. Colors are: red, black, gray, green, blue,

white and yellow.

On special order where production quantities warrant, Switchcraft can supply assembled and

Rear--.093 inch (2.3 mm) maximum

Series TY(*)FPC:

Front--.312 inch (7.9 mm) maximum

Rear--.093 inch (2.3 mm) maximum

SPECIFICATIONS: (all Tini QG, except 6 pin)

Contact Resistance: .010 ohms maximum after life (and after salt spray).

Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC on 5 circuit) based on 30°C

maximum.

Insulation Resistance: 510,000 megohms minimum @ 500 V DC (initial); 10,000 megohms

Solderability Standard: Meets EIA RS-186-9E.

Mechanical Shock: Meets MIL-STD-202, method 213B.

Wire Size: #22 wire gauge solid; #24 wire gauge stranded.

Thermal Range: -55°C to + 85°C.

Thermal Shock: Meets MIL-STD-202, method 107D.

Salt Spray: Meets MlL-STD-202, method 101.

Release Lever and Mounting Washer: Steel, nickel-plated.

Standoff/Ground Terminal and Cable Clamp: Steel, electrotinned.

Inserts and Insulating Spacer: Molded, high strength thermoplastic.

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

SPECIFICATIONS: (6 Pin Plugs, Receptacles

and Adapters)

Contact Resistance: .010 ohm maximum after life.

Current Rating (Carry only): 1.5A, 125 VAC, based

on 30° maximum

Insulation Resistance: 510,000 M(omega) minimum

Solderability Standard: Meets EIA RS-186-9E.

Wire Size: 28 wire gauge stranded.

Housings, Plugs and Male Receptacles: Copper alloy,

nickel-plated.

Socket Contacts: Copper alloy, silver-plated.

Pin Contacts: Copper alloy, electrotinned.

Flex Relief and Latch Button: Molded thermoplastic.

Ground Terminal: Copper alloy, electrotinned.

Inserts and Insulating Spacer: Molded high strength