SPECIFICATION Part No. : PCB.RPSMAFRA.HT Product Name : RP-SMA(F)RA PCB Mount Jack Connector Solder Attachment Through Hole Feature : RP-SMA(F)RA Jack Through Hole Frequency Range: DC up to 6GHz Finish: Gold Dimensions: 13.75mm*15.1mm RoHS Compliant SPE-14-8-101/C/AD Page 1 of 3 1. Introduction The PCB.RPSMAFRA.HT connector was designed to be mounted on a PCB. The maximum thickness of PCB that the connector can be used with is 0.4mm. The connector pin is directly soldered onto pads on the PCB. The connector is a standard RP-SMA(F)RA Jack. Taoglas connectors are all RoHS compliant. 2. Specification ELECTRICAL Impedance 50 Frequency Range DC~6 GHz Working Voltage Max. 170 Vrms Dielectric withstanding Voltage 500 Vrms Insulation Resistance 1000M M MECHANICAL Connector Dimension 13.75mm*15.1mm Connector Pin Diameter 1.25 mm Connector Type RP-SMA(F)RA Through Hole Jack ENVIRONMENTAL RoHS compliant SPE-14-8-101/C/AD Page 2 of 3 3. Connector Drawing Name Material Finish QTY 1 Body Brass Gold 1 2 Insulator Teflon White 1 3 Pin Brass Gold 1 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright (c) 2014, Taoglas Ltd. SPE-14-8-101/C/AD Page 3 of 3