Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC392LH5 v00.0707 LOW NOISE AMPLIFIERS - SMT 8 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Typical Applications Features The HMC392LH5 is ideal for: High Gain: 15.4 dB * Point-to-Point Radios Low Noise Figure: 2.5 dB * VSAT Single Positive Supply: +5V * LO Driver for HMC Mixers DC Blocked & 50 Ohm Matched RF I/Os * Military EW, ECM, C3I No External Matching Components Required * Space Hermetic SMT Package, 25 mm2 Functional Diagram General Description The HMC392LH5 is a GaAs MMIC Low Noise Amplifier packaged in a hermetic surface mount package which operates between 3.5 and 7 GHz. The amplifier provides 15.4 dB of gain, 2.5 dB noise figure, and +24.5 dBm output IP3 from a single+5V supply. The HMC392LH5 has six biasing options which allow the user to select the bias point and output power of the device (+13 to +17 dBm). The HMC392LH5 functions well as a low noise or driver amplifier and is ideal for driving the LO port of Hittite mixers. The HMC392LH5 is well suited for high reliability military, industrial and space applications. Electrical Specifi cations, TA = +25 C, Vdd = +5V, PS4= PS8= GND Parameter Min. Frequency Range Gain Typ. Max. Min. 4-6 12.8 Gain Variation Over Temperature Typ. Max. 3.5 - 7 15.4 12 Units GHz 15.2 dB 0.018 0.025 0.018 0.025 dB/ C Noise Figure 2.5 3.2 2.7 3.7 dB Input Return Loss 15 12 Output Return Loss Output Power for 1 dB Compression (P1dB) 17 15 dB 11 13.5 14 dBm 17.5 dBm 22 24.5 24.5 dBm Saturated Output Power (Psat) Output Third Order Intercept (IP3) Supply Current (Idd) dB 17.5 43 21 60 43 60 mA Note: Data taken with pins PS4 & PS8 connected to ground and pins PS3, PS4, PS6 & PS7 unconnected (state 5) unless otherwise noted. 8 - 90 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Broadband Gain & Return Loss 8 Gain vs. Temperature 18 16 S21 S11 S22 0 GAIN (dB) RESPONSE (dB) 10 -10 14 12 +25 C +85 C -40 C 10 -20 8 -30 6 2 3 4 5 6 7 8 3 9 4 FREQUENCY (GHz) 0 -5 -5 -10 -15 +25C +85C - 40C 7 8 +25C +85C - 40C -10 -15 -20 -25 -25 3 4 5 6 7 8 3 4 FREQUENCY (GHz) 5 6 7 8 FREQUENCY (GHz) Noise Figure vs. Temperature Reverse Isolation vs. Temperature 5 0 -10 ISOLATION (dB) 4 NOISE FIGURE (dB) 6 Output Return Loss vs. Temperature 0 RETURN LOSS (dB) RETURN LOSS (dB) Input Return Loss vs. Temperature -20 5 FREQUENCY (GHz) LOW NOISE AMPLIFIERS - SMT 20 20 3 2 1 +25C +85C - 40C +25C +85C - 40C -20 -30 -40 -50 -60 0 3 4 5 6 FREQUENCY (GHz) 7 8 3 4 5 6 7 8 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 91 HMC392LH5 v00.0707 8 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Output P1dB vs. Temperature Psat vs. Temperature 22 +25C +85C - 40C 20 Psat (dBm) P1dB (dBm) 18 16 14 18 16 +25C +85C - 40C 14 12 12 10 10 3 4 5 6 7 8 3 3.5 4 FREQUENCY (GHz) +25C +85C - 40C 26 24 22 20 4 5 6 7 8 GAIN (dB), NOISE FIGURE (dB), P1dB (dBm) 30 3 5 6.5 7 7.5 16 12 Gain Noise Figure P1dB 8 4 0 4.5 4.7 5 5.2 5.5 Vdd (V) Gain & Noise Figure vs. Power Select State Output P1dB vs. Power Select State 24 18 20 GAIN, NOISE FIGURE (dB) State 1 Idd=60mA State 2 Idd=50mA State 3 Idd=43mA State 4 Idd=53mA State 5 Idd=43mA State 6 Idd=38mA 22 P1dB (dBm) 6 20 FREQUENCY (GHz) 18 16 14 12 10 15 12 Gain State 1 Gain State 2 Gain State 3 Gain State 4 Gain State 5 Gain State 6 9 NF State 1 NF State 2 NF State 3 NF State 4 NF State 5 NF State 6 6 3 0 3 4 5 6 FREQUENCY (GHz) 8 - 92 5.5 Gain, Noise Figure & Output Power vs. Supply Voltage @ 5.5 GHz 32 28 4.5 FREQUENCY (GHz) Output IP3 vs. Temperature IP3 (dBm) LOW NOISE AMPLIFIERS - SMT 20 7 8 3 4 5 6 7 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz 15 Pout Gain PAE 5 0 -15 -13 -11 -9 -7 -5 -3 -1 1 3 5 INPUT POWER (dBm) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Drain Bias Voltage (Vdd) +8 Vdc RF Input Power (RFIN)(Vdd = +5 Vdc) +10 dBm Channel Temperature 175 C Continuous Pdiss (T= 85 C) (derate 6.99 mW/C above 85 C) 0.629 W Thermal Resistance (channel to ground paddle) 143.08 C/W Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C Typical Supply Current vs. Vdd Vdd (Vdc) Idd (mA) +4.5 43 +5.0 44 +5.5 45 (State 5 Depicted) Outline Drawing LOW NOISE AMPLIFIERS - SMT Pout (dBm), GAIN (dB), PAE (%) 20 10 8 Absolute Maximum Ratings Power Compression @ 5.5 GHz NOTES: 1. PACKAGE BODY MATERIAL: CERAMIC & KOVAR 2. LEAD AND GROUND PADDLE PLATING: GOLD 40 - 80 MICROINCHES. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PAD BURR LENGTH 0.15mm MAX. PAD BURR HEIGHT 0.25mm MAX. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 93 HMC392LH5 v00.0707 LOW NOISE AMPLIFIERS - SMT 8 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz Pin Descriptions Pin Number Function Description 2 RFIN This pin is AC coupled and matched to 50 Ohms. Power Select 12 11 PS3 PS4 Interface Schematic One of these pins must be connected to ground and one must be unconnected. See Power Select Table for selection criteria. Power Select One of these pins must be connected to ground and two must be unconnected. See Power Select Table for selection criteria. 6 5 4 PS7 PS8 PS9 10 Vdd Power supply voltage for amplifier. External bypass 100pF, 1000pF and 4.7 F are required. 8 RFOUT This pin is AC coupled and matched to 50 Ohms. 1, 3, 7, 9 GND These pins and package bottom must be connected to RF/DC ground. Power Select Table 8 - 94 State Pins Connected to Ground Typical Idd (mA) Typical Output P1dB (dBm) Typical Gain (dB) Typical Noise Figure (dB) 1 PS3 & PS7 60 16.8 16.0 2.7 2 PS3 & PS8 50 15.7 15.5 2.7 3 PS3 & PS9 43 13.5 15.3 2.9 4 PS4 & PS7 53 15.5 15.4 2.9 5 PS4 & PS8 43 14.0 15.2 2.7 6 PS4 & PS9 38 12.8 15.2 2.7 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC392LH5 v00.0707 GaAs MMIC LOW NOISE AMPLIFIER, 3.5 - 7.0 GHz 8 LOW NOISE AMPLIFIERS - SMT Evaluation PCB List of Materials for Evaluation PCB 117431 [1] Item J1, J2 Description SMA J3 - J4 DC Pin C1 100 pF capacitor, 0402 pkg. C2 1,000 pF Capacitor, 0603 pkg. C3 4.7 F Capacitor, Tantalum U1 HMC392LH5 Amplifier PCB [2] 117429 Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350. The circuit board used in this application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 95 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Analog Devices Inc.: HMC392LH5TR