Amphenol QWL Series Cylindrical Connectors (R) 12-053-4 Amphenol TABLE OF CONTENTS Page Description............................................................... Page QWL Series ......................................................... 2 QWL - accessories 10-130380 cable sealing adapter (with clamp bars) .......................................... 43, 44 Description Amphenol(R) Heavy Duty Cylindrical Connectors QWL the environmental connector ............................... 3 QWL - accessories 10-10133X cable sealing adapters ................ 45-48 QWL how to order ..................................................... 4, 5 QWL - accessories 10-113637 cable sealing adapter (with woven strain relief) ....................................................49-52 QWL 10-1070 wall mount receptacle ............................ 6 QWL - accessories adapter, cable clamp .......................................... 53 QWL 10-1071 cable connecting plug ............................ 7 QWL - accessories adapter, cable clamp, sealing plugs .............. 54-56 QWL 10-1072 box mount receptacle ............................ 8 QWL - accessories protection caps ............................................. 57, 58 QWL 10-1073 jam nut receptacle (wall mount) ............. 9 QWL - accessories flange gasket, grip banding clamp ...................... 59 QWL 10-1074 thru bulkhead receptacle ..................... 10 QWL crimp contacts .................................................... 60 QWL 10-1076 straight plug ......................................... 11 QWL solder contacts ................................................... 61 QWL 10-1077 flange mount plug ................................ 12 QWL application tools (crimp type) ...............................62 QWL 10-1079 jam nut receptacle (box mount) ........... 13 QWL thermocouple contacts and arrangements ......................................... 63-69 QWL insert arrangements selection guide .............................................. 14-16 Other Heavy Duty Connectors Offered by Amphenol .............................................................70 QWL alternate positioning ........................................... 17 Sales Office Listing QWL contact insert arrangements ......................... 18-29 QWL special contact insert arrangements ............. 30-40 For additional information concerning the Amphenol(R) QWL Series Cylindrical Connector, or if there are special application requirements, contact your local sales office or Amphenol Corporation Amphenol Aerospace 40-60 Delaware Ave. Sidney, New York 13838-1395 Telephone: 607-563-5011 Fax: 607-563-5351 www.amphenol-aerospace.com (Most Amphenol catalogs can be viewed, printed and down-loaded from the website) QWL - accessories cabling information ...................................... 41, 42 Amphenol Aerospace operates Quality Systems that are Certified to ISO-9001 and AS-9100 by third party Registrars. 1 (R) Amphenol Heavy Duty Cylindrical Connectors QWL Series Amphenol(R) QWL Series Connectors are tailor made for compact, heavy duty industrial use. The outstanding performance of this series makes it well suited for shipboard installations and ground support power distribution applications where physical strength and dependability are key requirements. wall mount receptacle thru bulkhead receptacle straight plug cable connecting plug The QWL Series are a versatile, economical alternative to military qualified designs. Equivalent MS shell sizes and insert arrangements offer compatibility with all standard cable types. MIL-C-22992 environmental connector requirements (see page 1) are used as a performance criteria base for this series to assure reliability under the most severe conditions. The design features of this connector series provide: * Exceptional Service - high strength aluminum shells with Alumilite 225* hard anodic finish and shock resistant resilient inserts. * Foolproof Operation - rugged double stub coupling threads, left hand accessory threads and simple single keyway mating. box mount receptacle flange mount plug * Versatility - both MS and custom insert patterns available for a wide variety of multiconductor cables. A complete line of accessories is available for use with QWL Series connectors, including cable sealing and clamp adapters, protective covers, flange gaskets and banding clamps. jam nut receptacle (wall mount) jam nut receptacle (box mount) 2 * Registered trademark of Aluminum Company of America QWL the environmental connector * HIGH CURRENT CAPACITY for power distribution network and inputs to large equipment * RUGGED CONSTRUCTION dictated by the working environment, high strength aluminum shells with Alumilite 225* hard anodic finish, shock resistant resilient inserts, gaskets or "O" rings at appropriate surfaces for perfect weather tight connections. * SERVICEABILITY AND FOOL-PROOF OPERATION with fast coupling, easily maintained double stub threads, left hand accessory threads and single keyway mating. * VERSATILITY - both MS and custom insert patterns available to accommodate a wide variety of multi conductor cables. CONDITION CONFIGURATION THERMAL SHOCK UNMATED MOISTURE RESISTANCE (Cable mounted connectors) MATED DURABILITY MATED SALT SPRAY (Corrosion) UNMATED VIBRATION MATED DESCRIPTION REFERENCE Five complete one hour temperature MIL-STD-1344 cycles of -55C to +125C method 1003 Ten complete 24 hour cycles of MIL-STD-202 +25C to +65C temperature at 90% method 106 test condition to 98% humidity 500 complete mating/unmating cycles MIL-C-22992 48 hour exposure to atomized 5% MIL-STD-1344 saline solution at +35C method 1001 10 to 55 Hz, .06 inch total excursion MIL-STD-1344 in 1 minute cycles for 6 hours method 2005 55 to 2000 Hz, 10G peak amplitude sweep HIGH IMPACT MATED Nine hammer blows from 1, 3 and MIL-STD-202 5 feet, three each in three axes method 207 on mounting panel FLUID IMMERSION UNMATED WATER IMMERSION MATED 20 hours immersion in hydraulic MIL-C-22992 fluid and lubricating oil 4 hours immersion at 1 atmosphere MIL-C-22992 pressure differential * Registered trademark of Aluminum Company of America 3 QWL how to order QWL heavy duty cylindrical connectors are ordered by Amphenol(R) part number only. To illustrate the ordering procedure, part number 10-107628-5P is shown as follows: PART NUMBER 10 - 107 6 28-5 P 1 2 3 4 5 See code below: 1. Base Number Prefix - used to define contact type and finish. 10- Solder type contacts, silver plated (Standard) 75- Crimp type contacts, silver plated 81- Crimp type contacts, plated .0001 gold over silver 82- Crimp type contacts for MIL-C-13777 cable, silver plated 83- Crimp type contacts for MIL-C-13777 cable, plated .0001 gold over silver 85- Crimp type contacts plated .00005 gold over silver 2. Base Number - QWL Series Heavy Duty Cylindrical Connector. 3. 0 1 2 3 4 6 7 9 Shell Style designates wall mount receptacle designates cable connecting plug designates box mount receptacle designates jam nut receptacle with rear accessory threads (wall mount) designates thru bulkhead receptacle designates straight plug designates flange mount plug designates jam nut receptacle (box mount) 4. Shell Size/Insert Arrangement - Amphenol(R) QWL connectors are available in equivalent MS shell sizes with all current MS insert arrangements as well as a large selection of special arrangements for power and signal circuits. Select the required insert arrangement number from those shown on pages 18-40. 5. Contact Type/Alternate Insert Rotations - P for pin, S for socket. When an alternate position of the connector insert is required to prevent cross mating of connectors, a different letter (other than P or S) is used. Select from the table below the Amphenol(R) letter which indicates both type of contact, and insert rotation desired. Refer to page 17 for alternate insert rotations. PIN CONTACTS MS AMPHENOL(R) LETTERS LETTER P P (normal) PW G PX I PY K PZ M SOCKET CONTACTS MS AMPHENOL(R) LETTERS LETTER S S (normal) SW H SX J SY L SZ N 4 QWL how to order, cont. ACCESSORIES Cable Sealing Adapters - these are the basic connector accessories which provide moisture proofing and cable strain relief. Selection is made on the basis of accessory style, shell size and cable dimensions. To illustrate the ordering procedure, part number 10-101335-361 is shown as follows: PART NUMBER 10 - 101335 1 - 361 2 See code below: 1. Accessory Base Number - refer to pages 41 through 52 for descriptions and dimensional data.10-101332 designates short barrel length with woven strain relief grip 10-101333 designates short barrel length without strain relief 10-101334 designates short barrel length with woven strain relief grip and attaching ring for protection cap with bead chain 10-101335 designates short barrel length with attaching ring for protection cap with bead chain 10-101380 designates short barrel length with attaching ring for protection cap with bead chain and clamp type strain relief bars 10-113637 designates long barrel length with woven strain relief and attaching ring for protection cap with bead chain 2. Part Number - represents connector shell size and range of cable diameters accommodated by the sealing adapter. Refer to the page listed below to determine the part number required for the accessory style being used: Accessory Series 10-10133X 10-130380 10-113637 Page 46 - 48 44 50 - 52 Cable Clamp 10-749XX-( ) and Adapter 10-113196-XX Connectors which require weatherproofing on open wire cables are provided with a moisture seal by this cable clamp, a modification of the MS3057B design. A rubber grommet with holes for individual wires is used in place of the sleeve. As the assembly is tightened, the grommet is compressed around each wire, sealing out moisture. Order this clamp by the part number listed on page 53 to accommodate the connector being used. Suffix the part number with the connector insert arrangement number. To attach the cable clamp to the left hand accessory threads of QWL connectors, Adapter 10-113196-XX is needed. Finish is non-conductive Alumilite. Order by adapter part number listed on page 53 to accommodate the connector shell size being used. For a moisture proof seal, unused grommet holes must be filled with the appropriate size sealing plug or sealing rod selected from the table on page 53. Sealing plug or sealing rods must be ordered separately. M85049/1 Cable Clamp and Adapter 10-113138-XX - order this clamp by the M85049( )C part number listed on page 55 to accommodate the cable type being used. To attach the cable clamp to the left hand accessory threads of QWL connectors, Adapter 10-113138-XX is needed. Order by adapter part number listed on page 55 to accommodate the connector shell size being used. Standard finish on the clamp is olive drab, cadmium plate. Adapter finish is non-conductive Alumilite. MS3420-( )A sleeve, to facilitate sealing on smaller diameter cables, must be ordered separately. MS3420-( )A sleeves may be nested to accommodate smaller cable diameters. Plug Protection Caps 10-101046-( ) designates plug cover with chain, Alumilite 225 finish 10-101531-( ) designates plug cover with chain and eyelet end, Alumilite 225 finish Order these plug covers by the part number listed on page 57 for the appropriate connector shell size. Receptacle Protection Caps 10-101063-( ) designates receptacle cover with chain, Alumilite 225 finish 10-101048-( ) designates receptacle cover with chain and eyelet, Alumilite 225 finish Order these receptacle covers by the part number listed on page 57 for the appropriate connector shell size. Flange Gasket 10-36675-( ) for operating temperature range -67 to +275F 10-40450-( ) for operating temperature range 0 to +257F Order by part number listed on page 59 for appropriate connector shell size. 10-183249 Grip Banding Clamp - order this stainless steel clamp by part number listed on page 59 to accommodate cable diameter being used. 5 QWL 10-1070XX wall mount receptacle K Z S R S A THREAD W M R T 4 HOLES B V LEFT HAND All dimensions for reference only. A Thread Class 2A B Min Full Thread K .015 M +.016 -.000 R .005 S .020 T Dia +.004 -.003 V Thread Class 2A-LH W .010 Z Max Part Number* Shell Size 10-107010 10S .6250-0.05P-0.1L-DS .391 .704 .562 .719 1.000 .150 .500-28UNEF .400 .450 10-107012 12S .7500-0.1P-0.2L-DS .391 .704 .562 .812 1.094 .150 .625-24UNEF .400 .450 10-107013 12 .7500-0.1P-0.2L-DS .625 .891 .750 .812 1.094 .150 .625-24UNEF .588 .700 10-107014 14S .8750-0.1P-0.2L-DS .391 .704 .562 .906 1.188 .150 .750-20UNEF .400 .450 10-107015 14 .8750-0.1P-0.2L-DS .625 .891 .750 .906 1.188 .150 .750-20UNEF .588 .700 10-107016 16S 1.0000-0.1P-0.2L-DS .391 .704 .562 .969 1.281 .150 .875-20UNEF .400 .450 10-107017 16 1.0000-0.1P-0.2L-DS .625 .891 .750 .969 1.281 .150 .875-20UNEF .588 .700 10-107018 18 1.1250-0.1P-0.2L-DS .625 .906 .750 1.062 1.375 .177 1.000-20UNEF .573 .686 10-107020 20 1.2500-0.1P-0.2L-DS .625 .906 .750 1.156 1.500 .177 1.125-18NEF .573 .686 10-107022 22 1.3750-0.1P-0.2L-DS .625 .906 .750 1.250 1.625 .177 1.250-18NEF .573 .686 10-107024 24 1.5000-0.1P-0.2L-DS .625 .968 .812 1.375 1.750 .177 1.375-18NEF .573 .624 10-107028 28 1.7500-0.1P-0.2L-DS .625 .968 .812 1.562 2.000 .177 1.625-18NEF .573 .624 10-107032 32 2.0000-0.1P-0.2L-DS .625 1.031 .875 1.750 2.250 .209 1.875-16N .573 .561 10-107036 36 2.2500-0.1P-0.2L-DS .625 1.031 .875 1.938 2.500 .209 2.0625-16N .573 .561 10-107040 40 2.5000-0.1P-0.2L-DS .625 1.031 .875 2.188 2.750 .209 2.3125-16N .573 .561 10-107044 44 2.7500-0.1P-0.2L-DS .625 1.031 .875 2.375 3.000 .209 2.625-16UN .698 .801 *For complete order number see page 4 6 QWL 10-1071XX cable connecting plug S K M A Thread Z W S V LEFT HAND All dimensions for reference only. K .015 M +.016 -.000 S .020 V Thread Class 2A-LH W .010 Z Max .6250-0.05P-0.1L-DS .704 .453 .750 .500-28UNEF .400 .450 .7500-0.1P-0.2L-DS .704 .453 .875 .625-24UNEF .400 .450 12 .7500-0.1P-0.2L-DS .891 .641 .875 .625-24UNEF .588 .701 10-107114 14S .8750-0.1P-0.2L-DS .704 .453 1.000 .750-20UNEF .400 .450 10-107115 14 .8750-0.1P-0.2L-DS .891 .641 1.000 .750-20UNEF .588 .701 10-107116 16S 1.0000-0.1P-0.2L-DS .704 .453 1.094 .875-20UNEF .400 .450 10-107117 16 1.0000-0.1P-0.2L-DS .891 .641 1.094 .875-20UNEF .588 .701 10-107118 18 1.1250-0.1P-0.2L-DS .906 .656 1.281 1.000-20UNEF .573 .686 10-107120 20 1.2500-0.1P-0.2L-DS .906 .656 1.375 1.125-18UNEF .573 .686 10-107122 22 1.3750-0.1P-0.2L-DS .906 .656 1.500 1.250-18UNEF .573 .686 10-107124 24 1.5000-0.1P-0.2L-DS .968 .719 1.625 1.375-18UNEF .573 .624 10-107128 28 1.7500-0.1P-0.2L-DS .968 .719 1.875 1.625-18UNEF .573 .624 10-107132 32 2.0000-0.1P-0.2L-DS 1.031 .656 2.125 1.875-16UN .573 .561 10-107136 36 2.2500-0.1P-0.2L-DS 1.031 .656 2.375 2.0625-16UNS .573 .561 10-107140 40 2.5000-0.1P-0.2L-DS 1.031 .656 2.625 2.3125-16UNS .573 .561 10-107144 44 2.7500-0.1P-0.2L-DS 1.031 .656 3.000 2.625-16UN .698 .800 10-107148 48 3.0000-0.1P-0.2L-DS 1.031 .656 3.125 2.875-16UN .698 .800 Part Number* Shell Size 10-107110 10S 10-107112 12S 10-107113 A Thread (plated) Class 2A *For complete order number see page 4 7 QWL 10-1072XX box mount receptacle K S M R S Z W R Y T 4 HOLES B A All dimensions for reference only. A Thread (Plated) Class 2A B Min Full Thread K +.026 -.010 M +.016 -.000 R .005 S .020 T Dia +.004 -.003 W +.020 -.036 Y Dia .010 Z Max Part Number* Shell Size 10-107210 10S .6250-0.05P-0.1L-DS .391 .703 .562 .719 1.000 .150 .281 .469 .451 10-107212 12S .7500-0.1P-0.2L-DS .391 .703 .562 .812 1.094 .150 .281 .594 .451 10-107213 12 .7500-0.1P-0.2L-DS .625 .891 .750 .812 1.094 .150 .469 .594 .700 10-107214 14S .8750-0.1P-0.2L-DS .391 .703 .562 .906 1.188 .150 .281 .719 .451 10-107215 14 .8750-0.1P-0.2L-DS .625 .891 .750 .906 1.188 .150 .469 .719 .700 10-107216 16S 1.0000-0.1P-0.2L-DS .391 .703 .562 .969 1.281 .150 .281 .844 .451 10-107217 16 1.0000-0.1P-0.2L-DS .625 .891 .750 .969 1.281 .150 .469 .844 .700 10-107218 18 1.1250-0.1P-0.2L-DS .625 .906 .750 1.062 1.375 .177 .453 .969 .686 10-107220 20 1.2500-0.1P-0.2L-DS .625 .906 .750 1.156 1.500 .177 .453 1.125 .686 10-107222 22 1.3750-0.1P-0.2L-DS .625 .906 .750 1.250 1.625 .177 .453 1.250 .686 10-107224 24 1.5000-0.1P-0.2L-DS .625 1.000 .812 1.375 1.750 .177 .359 1.375 .585 10-107228 28 1.7500-0.1P-0.2L-DS .625 1.000 .812 1.562 2.000 .177 .359 1.594 .591 10-107232 32 2.0000-0.1P-0.2L-DS .625 1.063 .875 1.750 2.250 .209 .296 1.844 .528 10-107236 36 2.2500-0.1P-0.2L-DS .625 1.063 .875 1.938 2.500 .209 .296 2.031 .528 10-107240 40 2.5000-0.1P-0.2L-DS .625 1.063 .875 2.188 2.750 .209 .296 2.281 .528 10-107244 44 2.7500-0.1P-0.2L-DS .625 1.063 .875 2.375 3.000 .209 .546 2.562 .769 10-107248 48 3.0000-0.1P-0.2L-DS .625 1.063 .875 2.625 3.250 .209 .546 2.812 .769 *For complete order number see page 4 8 QWL 10-1073XX jam nut receptacle (wall mount) S F M P N Z H A P S E B Shell Size 10 12, 13 14, 15 16, 17 18 20 22 24 28 32 36 40 V LEFT HAND W K Dia +.005 -.000 .880 1.005 1.130 1.255 1.380 1.505 1.630 1.880 2.130 2.380 2.630 2.880 mounting dimensions G .003 .518 .562 .606 .699 .739 .783 .830 .919 1.007 1.096 1.183 1.292 U .005 .625 .688 .750 .875 .938 1.000 1.062 1.188 1.312 1.438 1.562 1.703 U G .125 .002 DIA. PIN G U K All dimensions for reference only. H Panel Thickness Max M .010 N .015 P .010 S .010 V Thread Class 2A-LH W Z .010 Max .094 .227 .844 .469 .375 1.062 .500-28UNEF .344 .094 .200 .906 .469 .442 1.250 .625-24UNEF .344 .232 1.062 .094 .188 1.094 .641 .442 1.250 .625-24UNEF .516 .483 1.000-20UNEF 1.250 .094 .200 .906 .469 .486 1.376 .750-20UNEF .344 .232 1.000-20UNEF 1.250 .094 .188 1.094 .641 .486 1.376 .750-20UNEF .516 .483 .385 1.125-18UNEF 1.312 .094 .200 .906 .469 .530 1.500 .875-20UNEF .344 .232 1.0000-0.1P-0.2L-DS .585 1.125-18UNEF 1.312 .094 .188 1.094 .641 .530 1.500 .875-20UNEF .516 .483 18 1.1250-0.1P-0.2L-DS .585 1.250-18UNEF 1.500 .094 .203 1.109 .704 .623 1.750 1.000-20UNEF .516 .467 20 1.2500-0.1P-0.2L-DS .585 1.375-18UNEF 1.562 .094 .203 1.109 .704 .663 1.875 1.125-18UNEF .516 .467 10-107322 22 1.3750-0.1P-0.2L-DS .585 1.500-18UNEF 1.750 .094 .203 1.109 .704 .707 2.000 1.250-18UNEF .516 .467 10-107324 24 1.5000-0.1P-0.2L-DS .585 1.625-18UNEF 1.875 .094 .265 1.172 .704 .751 2.125 1.375-18UNEF .516 .404 10-107328 28 1.7500-0.1P-0.2L-DS .585 1.875-16UNEF 2.125 .094 .265 1.172 .704 .840 2.375 1.625-18UNEF .516 .404 10-107332 32 2.0000-0.1P-0.2L-DS .585 2.125-16UNEF 2.375 .094 .203 1.172 .735 .928 2.625 1.875-16UN .516 .404 10-107336 36 2.2500-0.1P-0.2L-DS .585 2.375-16UN 2.625 .094 .203 1.172 .735 1.017 2.875 2.0625-16UN .516 .404 10-107340 40 2.5000-0.1P-0.2L-DS .585 2.625-16UN 2.875 .094 .203 1.172 .735 1.104 3.125 2.3125-16UN .516 .404 10-107344 44 2.7500-0.1P-0.2L-DS .585 2.875-16UN 3.125 .094 .265 1.234 .922 1.213 3.406 2.625-16UN .703 .593 10-107348 48 3.0000-0.1P-0.2L-DS .585 3.125-16UN 3.375 .094 .265 1.234 .922 1.299 3.656 2.875-16UN .703 .593 Part Number* Shell Size 10-107310 10-107312 F Hex .010 Min A Thread Class 2A B .010 E Thread Class 2A 10S .6250-0.5-0.1L-DS .385 .6875-24UNEF .875 12S .7500-0.1P-0.2L-DS .385 .875-20UNEF 1.062 10-107313 12 .7500-0.1P-0.2L-DS .585 .875-20UNEF 10-107314 14S .8750-0.1P-0.2L-DS .385 10-107315 14 .8750-0.1P-0.2L-DS .585 10-107316 16S 1.0000-0.1P-0.2L-DS 10-107317 16 10-107318 10-107320 *For complete order number see page 4. 9 .295 QWL 10-1074XX thru bulkhead receptacle L C M M S G R S R T 4 HOLES B A A B All dimensions for reference only. Part Number* Shell Size A Thread Class 2A B Min Full Thread C Ref G Max Bulkhead Thickness L .015 M +.000 -.010 R .005 S .020 T Dia +.004 -.003 10-107410 10S .6250-0.05P-0.1L-DS .406 .141 .266 1.563 .711 .719 1.000 .120 10-107412 12S .7500-0.1P-0.2L-DS .406 .141 .266 1.563 .711 .812 1.094 .120 10-107413 12 .7500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 .812 1.094 .120 10-107414 14S .8750-0.1P-0.2L-DS .406 .141 .266 1.563 .711 .906 1.188 .120 10-107415 14 10-107416 16S .8750-0.1P-0.2L-DS .625 .155 .312 2.125 .985 .906 1.188 .120 1.0000-0.1P-0.2L-DS .406 .141 .266 1.563 .711 .969 1.281 .120 10-107417 16 1.0000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 .969 1.281 .120 10-107418 18 1.1250-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.062 1.375 .120 10-107420 20 1.2500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.156 1.500 .120 10-107422 22 1.3750-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.250 1.625 .120 10-107424 24 1.5000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.375 1.750 .147 10-107428 28 1.7500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.562 2.000 .147 10-107432 32 2.0000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.750 2.250 .173 10-107436 36 2.2500-0.1P-0.2L-DS .625 .155 .312 2.125 .985 1.938 2.500 .173 10-107440 40 2.5000-0.1P-0.2L-DS .625 .155 .312 2.125 .985 2.188 2.750 .173 10-107444 44 2.7500-0.1P-0.2L-DS .625 .155 .438 2.375 1.110 2.375 3.000 .209 *For complete order number see page 4 10 QWL 10-1076XX straight plug Z J N B Q D G A V LEFT HAND All dimensions for reference only. D Dia +.010 -.000 Q Dia Max V Thread (Plated) Class 2A-LH Z Max .563 .882 .500-28UNEF .603 .563 1.010 .625-24UNEF .603 .719 .750 1.010 .625-24UNEF .852 .234 .531 .563 1.137 .750-20UNEF .603 .985 .077 .719 .750 1.137 .750-20UNEF .852 1.109 .234 .531 .563 1.264 .875-20UNEF .603 1.109 .141 .719 .750 1.264 .875-20UNEF .852 .578 1.235 .266 .719 .750 1.455 1.000-20UNEF .852 1.2500-0.1P-0.2L-DS .578 1.359 .266 .719 .750 1.551 1.1250-18UNEF .852 1.3750-0.1P-0.2L-DS .578 1.485 .266 .719 .750 1.678 1.2500-18UNEF .852 24 1.5000-0.1P-0.2L-DS .594 1.609 .266 .719 .812 1.806 1.375-18UNEF .852 10-107628 28 1.7500-0.1P-0.2L-DS .594 1.859 .266 .719 .812 2.060 1.625-18UNEF .852 10-107632 32 2.0000-0.1P-0.2L-DS .594 2.109 .266 .719 .875 2.315 1.875-16UN .852 10-107636 36 2.2500-0.1P-0.2L-DS .556 2.359 .285** .719 .875 2.569 2.0625-16UNS .852 10-107640 40 2.5000-0.1P-0.2L-DS .556 2.609 .285** .719 .875 2.824 2.3125-16UNS 10-107644 44 2.7500-0.1P-0.2L-DS .700 2.922 .141*** .719 1.000 3.142 2.625-16UN 1.103 10-107648 48 3.0000-0.1P-0.2L-DS .719 3.172 .141 .719 1.000 3.381 2.875-16UN 1.093 J .005 N .010 .053 .531 .109 .531 .859 .077 .985 .578 .406 1.0000-0.1P-0.2L-DS .578 18 1.1250-0.1P-0.2L-DS 10-107620 20 10-107622 22 10-107624 Part Number* Shell Size A Thread Class 2B B .020 10-107610 10S .6250-0.05P-0.1L-DS .406 .735 10-107612 12S .7500-0.1P-0.2L-DS .406 .859 10-107613 12 .7500-0.1P-0.2L-DS .578 10-107614 14S .8750-0.1P-0.2L-DS .406 10-107615 14 .8750-0.1P-0.2L-DS 10-107616 16S 1.0000-0.1P-0.2L-DS 10-107617 16 10-107618 G .030 *For complete order number see page 4 **Applicable Tolerance is .033 ***Applicable Tolerance is +.030 -.020 Applicable Tolerance is .026 Applicable Tolerance is +.013 -.023 11 .852 QWL 10-1077XX flange mount plug Z S J A N R S R T 4 HOLES C All dimensions for reference only. Part Number* Shell Size 10-107710 10S 10-107712 12S 10-107713 A Thread Class 2B C .005 J .005 N .020 R .005 .6250-0.05P-0.1L-DS .125 .531 .438 .7500-0.1P-0.2L-DS .156 .531 .438 12 .7500-0.1P-0.2L-DS .156 .719 10-107714 14S .8750-0.1P-0.2L-DS .156 .531 10-107715 14 .8750-0.1P-0.2L-DS .156 .719 .688 .812 1.062 4-40 NC .852 10-107716 16S 1.0000-0.1P-0.2L-DS .156 .531 .438 1.000 1.312 6-32 NC .602 10-107717 16 1.0000-0.1P-0.2L-DS .156 .719 .688 1.000 1.312 6-32 NC .852 10-107718 18 1.1250-0.1P-0.2L-DS .156 .719 .688 1.000 1.312 6-32 NC .852 10-107720 20 1.2500-0.1P-0.2L-DS .188 .719 .688 1.250 1.625 10-32 NF .852 10-107722 22 1.3750-0.1P-0.2L-DS .188 .719 .688 1.250 1.625 10-32 NF .852 10-107724 24 1.5000-0.1P-0.2L-DS .188 .719 .688 1.562 2.000 10-32 NF .852 10-107728 28 1.7500-0.1P-0.2L-DS .188 .719 .688 1.562 2.000 10-32 NF .852 10-107732 32 2.0000-0.1P-0.2L-DS .250 .719 .781 1.812 2.500 10-32 NF .852 10-107736 36 2.2500-0.1P-0.2L-DS .250 .719 .781 1.812 2.500 10-32 NF .852 10-107740 40 2.5000-0.1P-0.2L-DS .250 .719 .781 2.250 3.031 10-32 NF .852 10-107744 44 2.7500-0.1P-0.2L-DS .250 .719 1.000 2.375 3.031 10-32 NF .852 10-107748 48 3.0000-0.1P-0.2L-DS .250 .719 1.000 2.562 3.250 10-32 NF .852 *For complete order number see page 4 12 S .020 T Thread Z Max .562 .781 4-40 NC .602 .812 1.062 4-40 NC .602 .688 .812 1.062 4-40 NC .852 .438 .812 1.062 4-40 NC .602 QWL 10-1079XX jam nut receptacle (box mount) M S Z C F H P A P S B Shell Size 10 12, 13 14, 15 16, 17 18 20 22 24 28 32 36 40 44 48 E K Dia +.005 -.000 .693 .880 1.005 1.130 1.255 1.380 1.505 1.630 1.880 2.130 2.380 2.630 2.880 3.130 G .003 .451 .518 .562 .606 .699 .739 .783 .830 .919 1.007 1.096 1.183 1.292 1.378 U .005 .531 .625 .688 .750 .875 .938 1.000 1.062 1.188 1.312 1.438 1.562 1.703 1.828 mounting dimensions U G .125 .002 DIA. PIN G U K All dimensions for reference only. A Thread Class 2A B C .010 .005 E Thread Class 2A (Plated) F Hex .016 H Panel Thickness M .010 P .010 S .010 Z Max Part Number* Shell Size 10-107910 10S .6250-0.05P-0.1L-DS .385 .125 .6875-24NEF .875 .094 .227 .844 .375 1.062 .295 10-107912 12S .7500-0.1P-0.2L-DS .385 .125 .875-20UNEF 1.062 .094 .200 .906 .442 1.250 .232 10-107913 12 .7500-0.1P-0.2L-DS .585 .125 .875-20UNEF 1.062 .094 .282 1.188 .442 1.250 .389 10-107914 14S .8750-0.1P-0.2L-DS .385 .125 1.000-20UNEF 1.250 .094 .200 .906 .486 1.376 .232 10-107915 14 .8750-0.1P-0.2L-DS .585 .125 1.000-20UNEF 1.250 .094 .282 1.188 .486 1.376 .389 10-107916 16S 1.0000-0.1P-0.2L-DS .385 .125 1.125-18NEF 1.312 .094 .200 .906 .530 1.500 .232 10-107917 16 1.0000-0.1P-0.2L-DS .585 .125 1.125-18NEF 1.312 .094 .282 1.188 .530 1.500 .389 10-107918 18 1.1250-0.1P-0.2L-DS .585 .188 1.250-18NEF 1.500 .094 .250 1.156 .623 1.750 .420 10-107920 20 1.2500-0.1P-0.2L-DS .585 .188 1.375-18NEF 1.562 .094 .250 1.156 .663 1.875 .420 10-107922 22 1.3750-0.1P-0.2L-DS .585 .188 1.500-18NEF 1.750 .094 .250 1.156 .707 2.000 .420 10-107924 24 1.5000-0.1P-0.2L-DS .585 .188 1.625-18NEF 1.875 .094 .312 1.219 .751 2.125 .357 10-107928 28 1.7500-0.1P-0.2L-DS .585 .188 1.875-16UN 2.125 .094 .312 1.219 .840 2.375 .357 10-107932 32 2.0000-0.1P-0.2L-DS .585 .219 2.125-16UN 2.375 .094 .282 1.250 .928 2.625 .326 10-107936 36 2.2500-0.1P-0.2L-DS .585 .219 2.375-16UN 2.625 .094 .282 1.250 1.017 2.875 .326 10-107940 40 2.5000-0.1P-0.2L-DS .585 .219 2.625-16UN 2.875 .094 .282 1.250 1.104 3.125 .326 10-107944 44 2.7500-0.1P-0.2L-DS .585 .219 2.875-16UN 3.125 .094 .422 1.390 1.213 3.406 .436 10-107948 48 3.0000-0.1P-0.2L-DS .585 .219 3.125-16UN 3.375 .094 .422 1.390 1.299 3.656 .436 *For complete order number see page 4. 13 Min Max QWL insert arrangements - selection guide Contact Size Contact Size 16 Insert Arrangement Service Rating Total Contacts 0 1 1 20-2 D 1 1 A 2 2 20-3 D 3 3 D 1 1 20-4 D 4 4 20-6 D 3 3 20-7 D/A 8 4 20-8 Inst. 6 Insert Arrangement Service Rating Total Contacts 10S-2 A 12S-3 12S-4 12-5 D 1 14S-1 A 3 14S-2 Inst. 4 0 4 8 12 1 14S-4 D 1 1 20-9 D/A 8 14S-5 Inst. 5 5 20-11 Inst. 13 14S-6 Inst. 6 6 20-12 A 2 14S-7 A 3 3 20-14 A 5 4 8 12 16 3 8 2 4 1 7 13 1 1 2 3 14S-9 A 2 2 20-15 A 7 7 14S-10 Inst. 4 4 20-16 A 9 2 7 14S-12 A 3 3 20-17 A 6 5 1 14-3 A 1 20-18 A 9 3 6 16S-1 A 7 7 20-19 A 3 16S-3 B 1 1 20-20 A 4 16S-4 D 2 2 20-21 A 9 16S-5 A 3 3 20-22 A 6 3 16S-6 A 3 3 20-23 A 2 2 16S-8 A 5 5 20-24 A 4 2 16-2 E 1 20-25 Inst. 13 13 16-7 A 3 2 20-27 A 14 14 16-9 A 4 2 2 20-29 A 17 17 16-10 A 3 3 20-30 Inst. 13 13 16-11 A 2 2 20-33 A 11 11 16-12 A 1 22-1 D 2 2 16-13 A 2 22-2 D 3 3 18-1 A/Inst. 10 22-4 A 4 2 18-3 D 2 22-5 D 6 18-4 D 4 4 22-6 D 3 18-5 D 3 1 22-7 E 1 18-6 D 1 22-8 E 2 2 18-7 B 1 22-9 E 3 3 18-8 A 8 1 7 22-10 E 4 18-9 Inst. 7 2 5 22-11 B 2 18-10 A 4 4 22-12 D 5 18-11 A 5 5 22-13 D/A 5 18-12 A 6 22-14 A 19 18-13 A 4 22-15 E/A 6 5 1 18-14 A 2 22-16 A 9 3 6 1 1 1 1 1 2 10 2 2 1 1 6 1 3 1 1 3 1 3 1 8 3 2 2 2 2 4 1 1 4 2 2 3 4 1 19 18-15 A 4 4 22-17 D/A 9 18-16 C 1 1 22-18 D/A 8 8 18-17 Inst. 7 2 5 22-19 A 14 14 18-19 A 10 10 22-20 A 9 18-20 A 5 5 22-21 A 3 18-22 D 3 3 22-22 A 4 18-24 A/Inst. 10 10 22-23 D/A 8 18-29 A 5 5 22-24 D/A 6 18-30 A 5 5 22-27 D/A 9 18-31 A 5 5 22-28 A 7 14 8 9 1 2 4 8 2 1 4 8 7 QWL insert arrangements, cont. Contact Size Insert Arrangement Service Rating Total Contacts 22-33 D/A 7 22-34 D 5 3 22-36 D/A 8 8 24-2 D 7 7 24-3 D 7 2 24-5 A 16 24-6 D/A 8 8 24-7 A 16 2 0 4 8 12 Insert Arrangement 16 Total Contacts 0 E/D 5 2 4 8 12 16 7 32-1 2 32-2 E 5 32-3 D 9 32-4 A/D 14 5 32-5 D 2 16 32-6 A 23 32-7 Inst./A 35 7 28 32-8 A 30 6 24 32-9 D 14 2 32-10 E/B/D/A 7 2 32-12 A/D 15 14 24-9 A 2 24-10 A 7 2 7 24-11 A 9 3 6 32-13 D 23 1 3 3 32-15 D 8 2 Contact Size Service Rating 3 3 3 1 2 2 2 4 2 12 2 16 2 2 3 12 2 3 5 10 5 18 24-12 A 5 24-16 D/A 7 24-17 D 5 2 3 32-16 A 23 2 24-20 D 11 2 9 32-17 D 4 4 24-21 D 10 1 9 32-22 A 54 24-22 D 4 4 36-1 D 22 24-27 E 7 7 36-3 D 6 3 24-28 Inst. 24 24 36-4 D/A 3 3 28-1 D/A 9 36-5 A 4 4 28-2 D 14 36-6 A 6 2 28-3 E 3 36-7 A 47 7 28-4 E/D 9 1 46 28-5 D 5 2 14 14 28-6 D 3 28-7 D 2 28-8 E/D/A 12 2 28-9 D 12 6 28-10 D/A 7 28-11 A 22 28-12 A 28-13 A 28-15 A 3 6 2 12 3 2 6 3 2 16 54 4 18 3 4 40 2 7 36-8 A 47 1 2 36-9 A 31 3 36-10 A 48 48 2 36-11 A 48 48 10 36-12 A 48 6 36-13 E/A 17 36-14 D 16 18 36-15 D/A 35 26 26 36-16 A 47 7 26 26 36-17 A 47 7 40 35 35 36-18 A 31 2 14 14 2 2 2 2 3 4 1 2 48 2 5 5 15 6 35 1 40 28-16 A 20 20 36-20 A 34 28-17 B/D/A 15 15 36-52 A 52 28-18 C/D/A/Inst. 12 12 40-1 D 30 28-19 B/D/A 10 4 6 40-9 A 47 28-20 A 14 10 4 40-56 A 85 85 28-21 A 37 37 48-62 D 85 85 28-22 D 6 3 3 15 30 52 1 6 24 22 24 QWL special insert arrangements Insert Arrange ment 14S-A7 16-59 20-26 20-51 20-57 20-58 20-59 20-66 20-79 22-63 22-65 22-70 22-80 24-19 24-51 24-52 24-53 24-58 24-59 24-60 24-65 24-66 24-67 24-71 24-75 24-79 24-80 24-84 24-96 24-AJ 28-51 28-59 28-66 28-72 28-74 28-75 28-79 28-82 28-84 28-AY 32-25 32-31 32-48 32-52 32-53 32-56 32-57 32-58 32-60 32-62 32-64 32-68 32-73 32-75 32-76 32-79 32-82 Service Rating A A A A A A A A A/D A A/D A A A A Hi Volt. A A A A A D Inst. A A A Inst. A Inst. A A A A Coax A A A D A A A A Inst. D Inst./E A Coax Coax A Coax Inst. A A Coax A D A Total Contacts 7 4 19 3 7 10 3 6 8 12 8 13 3 12 5 1 5 13 14 7 15 7 19 7 7 5 23 19 28 25 12 17 16 3 16 16 16 6 9 9 25 31 48 8 42 30 8 4 23 23 54 16 46 9 19 5 16 Contact Size 4/0 2/0 0 4 8 12 16 7 Insert Arrange ment 32-AF 36-51 36-54 36-55 36-59 36-60 36-64 36-65 36-71 36-73 36-74 36-75 36-76 36-77 36-78 36-79 36-80 36-83 36-85 36-97 36-AF 40-5 40-10 40-35 40-53 40-57 40-61 40-62 40-63 40-64 40-66 40-67 40-68 40-70 40-72 40-73 40-74 40-75 40-80 40-81 40-82 40-85 40-86 40-87 40-AD 40-AG 40-AP 40-AR 40-AS 40-AT 40-AU 40-AV 44-52 44-53 48-51 48-52 48-53 48-54 48-55 48-57 48-60 Coax** 0 4 8 12 4 19 3 7* 5 5 3* 5* 1 4 8* 8 1 7 8 5 3* 12 5 1 5 3 3 7 7 7 11 7 19 4 7* 7* 7* 5 23 1 18 28 25 2 12 7 14 10 3 7* 7* 7 2 9 9 9 9 4 4 5 25 31 48 2 6 5 6* 6 37 24 2 4 2 1 2 15 16 54 12 46 2 19 4 4 8 2 4 7 1 12 * Crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. Arrangements identified with an asterisk (*) are exceptions. See insert arrangement drawings on pages 18-40 for application wire size. ** Coaxial cable data can be found on insert arrangement drawings, pages 38-48. For further information on coaxial contacts and cable see catalog 12-130. Consult Sidney, NY for alternate rotations not covered on page 17. 16 Service Rating A D A A A A Coax Coax A Coax A A A D A A A Coax A/D C A A A D A E A A A Coax Coax A A A A A A E A A A A E D A A E Inst. A A A D A A A A D A A A A Total Contacts 55 4 39 39 53 47 4 4 53 7 44 48 47 7 14 20 20 7 35 1 48 5 29 35 60 4 59 60 61 36 4 11 21 61 11 61 6 5 11 62 62 60 4 7 8 38 2 13 40 43 14 3 104 36 56 61 37 56 78 56 56 Contact Size 4/0 2/0 0 4 2 2 8 12 8 8* 3* 7* 16 55 0 Coax** 4 8 12 31 31 50 40 4 4 3 50 7 43 48* 47 1 7 12 2 20 20* 7 35* 1 48 5 4 9 16 35 60 4 1 3 3 55 60 61* 20 13 4 1 10 61 1 61 10 21 1 1 4 10 4 1 1 62* 62 60* 4 7 4 4 38 2 3 3 3 1 10 7 25 24 15 18 1 3 104 18 42 4 56 5 10 37 6 4 10 2 10 10 2 42 68 42 42 4 4 18 QWL alternate positioning To avoid cross-plugging problems in applications requiring the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. The following insert arrangements have the same alternate insert rotations for W, X, Y and Z, which are: Degrees B A B A A B A B As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. The socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. Position W Position X Position Y Position Z View looking into front face of pin insert or rear of socket insert. Degrees X Y Z 80 110 250 280 16-7 20-22 22-29 24-17 28-16 18-5 22-6 22-33 24-20 28-17 32-22 18-9 22-12 22-34 24-21 28-19 32-AF W X Y Z 10SL-4 63 - - - 20-18 12S-3 70 145 215 290 20-19 90 180 14S-2 - 120 240 - 20-21 35 110 32-13 18-13 22-14 24-1 24-28 28-20 36-1 18-14 22-15 24-3 28-1 28-21 36-7 20-7 22-16 24-4 28-4 32-1 36-8 20-8 22-17 24-5 28-8 32-3 36-13 20-9 22-18 24-6 28-9 32-4 40-AR 20-12 22-19 24-7 28-10 32-6 40-AS 20-14 22-21 24-12 28-11 32-9 40-AT 20-16 22-24 24-14 28-14 32-10 40-AU 20-20 22-25 24-16 28-15 32-12 Degrees Insert Arrangement Insert Arrangement W Insert Arrangement Degrees W X Y Z W X 35 110 250 325 28-7 Y Z 35 110 250 325 270 - 28-12 90 180 270 - 250 325 28-18 70 145 215 290 290 14S-5 - 110 - - 20-23 35 110 250 325 28-22 70 145 215 14S-7 90 180 270 - 20-24 35 110 250 325 28-AY 45 110 250 - 14S-9 70 145 215 290 20-27 35 110 250 325 32-2 70 145 215 290 16-9 35 110 250 325 20-29 80 - - 280 32-5 35 110 250 325 16-10 90 180 270 - 22-1 35 110 250 325 32-7 80 125 235 280 16-11 35 110 250 325 22-2 70 145 215 290 32-8 80 125 235 280 16-13 35 110 250 325 22-4 35 110 250 325 32-15 35 110 250 280 16S-1 80 - - 280 22-5 35 110 250 325 32-17 45 110 250 - 16S-4 35 110 250 325 22-8 35 110 250 325 32-25 60 120 - - 16S-5 70 145 215 290 22-9 70 145 215 290 32-48 80 - - - 16S-6 90 180 270 - 22-10 35 110 250 325 32-64 80 100 110 250 - 16S-8 - 170 265 - 22-11 35 110 250 325 32-68 30 - - 18-1 70 145 215 290 22-13 35 110 250 325 32-82 30 - - - 18-3 35 110 250 325 22-20 35 110 250 325 36-3 70 145 215 290 18-4 35 110 250 325 22-22 - 110 250 - 36-4 70 145 215 290 18-8 70 - - 290 22-23 35 - 250 - 36-5 - 120 240 - 18-10 - 120 240 - 22-27 80 - 250 280 36-6 35 110 250 325 18-11 - 170 265 - 22-28 80 - - 280 36-9 80 125 235 280 18-12 80 - - 280 22-63 20 - - - 36-10 80 125 235 280 18-15 - 120 240 - 24-2 80 - - 280 36-14 90 180 270 - 18-20 90 180 270 - 24-9 35 110 250 325 36-15 60 125 245 305 18-22 70 145 215 290 24-10 80 - - 280 36-AF 65 - - - 18-29 90 180 270 - 24-11 35 110 250 325 40-1 65 130 235 300 20-3 70 145 215 290 24-22 45 110 250 - 40-5 33 - - 270 20-4 45 110 250 - 24-27 80 - - 280 40-9 65 125 225 310 20-5 35 110 250 325 28-2 35 110 250 325 40-10 65 125 225 310 20-6 70 145 215 290 28-3 70 145 215 290 40-35 70 130 230 290 20-15 80 - - 280 28-5 35 110 250 325 40-AD 45 - - - 20-17 90 180 270 - 28-6 70 145 215 290 40-AG 37 74 285 322 40-AP 35 110 250 325 40-AV 90 180 270 - 17 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated B A D A C B A C B Insert Arrangement 10S-2 12S-3 12S-4 12-5 14S-1 14S-2 Service Rating A A A D A Inst. Number of Contacts 1 2 1 1 3 4 Contact Size 16 16 16 12 16 16 A E B B E B 100 A F A A C D C D C D A C B B 100 Rotation of 14S-2 Insert Arrangement 14S-4 14S-5 14S-6 14S-7 14S-9 14S-10 Service Rating D Inst. Inst. A A Inst. Number of Contacts 1 5 6 3 2 4 Contact Size 16 16 16 16 16 16 100 F E B A A G A C B D B A C C B 100 Rotation of 14S-7 Insert Arrangement 14S-12 14-3 16S-1 16S-3 16S-4 16S-5 Service Rating A A A B D A Number of Contacts 3 1 7 1 2 3 Contact Size 16 8 16 16 16 16 E C A A B A A D D C B Insert Arrangement B B C C 16S-6 16S-8 16-2 16-7 Service Rating A A E A Number of Contacts 3 5 1 1 2 2 Contact Size 16 16 12 8 16 12 16 CONTACT LEGEND 16 18 16-9 A 12 8 4 2 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated C H A A B A G A B I B J F B C B Insert Arrangement E A D 16-10 16-11 16-12 16-13 18-1 18-3 Service Rating A A A A B, C, F, G = A; Bal. = Inst. D Number of Contacts 3 2 1 2* 10 2 Contact Size 12 12 4 12 16 12 G D F A A C Insert Arrangement Service Rating F A C E H E B C B B D C D B G A 18-4 18-5 18-6 18-7 18-8 18-9 D D D B A Inst. Number of Contacts 4 2 1 1 1 1 7 2 5 Contact Size 16 12 16 4 8 12 16 12 16 E D A F D D E A A C C B C D B Service Rating D B B A 18-10 18-11 18-12 18-13 18-14 18-15 A A A A A A Number of Contacts 4 5 6 1 3 1 1 4** Contact Size 12 12 16 8 12 4 16 12 B G 100 A F C E B B D E F C G A H D A H J B I E C A B 250 J F C E D K 100 Rotation of 18-9 Service Rating A G G Insert Arrangement D 250 Rotation of 18-1 18-16 18-17 18-19 18-20 18-22 18-24 C Inst. A A D B, C, F, G = A; Bal. = Inst. Number of Contacts 1 2 5 10 5 3 10 Contact Size 12 12 16 16 16 16 16 CONTACT LEGEND * A = Iron; B = Constantan ** A, C = Iron; B, D = Constantan B C B C Insert Arrangement A A 19 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated E 110 A A A B C D E B E C D A B C C A C B B D 260 D 110 Rotation of 18-20 260 Rotation of 18-20 18-29 18-30 18-31 20-2 20-3 20-4 Service Rating A A A D D D Number of Contacts 5 5 5 1 3 4 Contact Size 16 16 16 0 12 12 Insert Arrangement A A C G E B A B F H G L B H F F C Insert Arrangement F A D E E G N D A C C C B E B M D H A D K B J 20-6 20-7 20-8 20-9 20-11 Service Rating D A, B, H, G = D; C, D, E, F = A Inst. H = D; Bal. = A Inst. Number of Contacts 3 8 2 4 1 7 13 1 1 Contact Size 16 16 8 16 12 16 16 4 16 E F A E G F E A B D H H D A B D C C A Insert Arrangement G C B A A F F D C A E G I 20-12 B I E C C D B B 20-14 20-15 20-16 20-17 20-18 20-19 A A A A A A Service Rating Number of Contacts 2 3 7 2 7 5 1 3 6 3 Contact Size 8 12 12 12 16 12 16 12 16 8 CONTACT LEGEND 20 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A D A F H I C G C F L B C F M E A D B D D E B 100 A A B B C N B G H A D C E K J 100 Rotation of 20-11 Insert Arrangement 20-20 Service Rating 20-21 A 20-22 20-23 A A A 20-24 20-25 A Inst. Number of Contacts 1 3 1 8 3 3 2 2 2 13 Contact Size 4 12 12 16 8 16 8 8 16 16 J A A I M B L K H N G L C K B L C N T P S R B D M F J E 250 F H G N E D F D E H A B M J K A A K C M C L H B A D J F G C B E 250 Rotation of 20-11 Insert Arrangement 20-27 20-29 20-30 20-33 22-1 22-2 Service Rating A A Inst. A D D Number of Contacts 14 17 13 11 2 3 Contact Size 16 16 16 16 8 8 A F A E D B B A B C Insert Arrangement A B D C C 22-4 22-5 22-6 22-7 22-8 A D D E E Service Rating Number of Contacts 2 2 2 4 2 1 1 2 Contact Size 8 12 12 16 8 16 0 12 CONTACT LEGEND 21 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A A D A E B C B A E C B C B B D Insert Arrangement D A C 22-9 22-10 22-11 Service Rating E E B Number of Contacts 3 4 2 2 3 4 1 Contact Size 12 16 16 8 16 12 16 M L K J U T V B P A A A N F F B G R G C Service Rating E = D; A, B, C, D = A G E C F C H E D D C D E 22-14 22-15 22-16 22-17 22-18 A D = E; A, B, C, E, F = A A A = D; Bal. = A A, B, F, G, H = D; C, D, E = A Number of Contacts 19 5 1 3 6 1 8 8 Contact Size 16 12 16 12 16 12 16 16 A B K J L M P H Insert Arrangement Service Rating C F G H A F J B G A C E D A F A H B E D N G B J F C D A B G E F Insert Arrangement D H B D E 22-13 A H J S H 22-12 B E D C B C C D 22-19 22-20 22-21 22-22 22-23 A A A A H = D; Bal. = A Number of Contacts 14 9 1 2 4 8 Contact Size 16 16 0 16 8 12 CONTACT LEGEND 22 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A A H F D A E C G F C C G E Service Rating B E D D Insert Arrangement A B H B C D G A F J G E F B B E C F D 22-24 22-27 22-28 22-33 22-36 C, D, E = D; A, B, F = A J = D; Bal. = A H = D; Bal. = A* A A, B, C, D = D; E, F, G = A Number of Contacts 2 4 1 8 7 7 8 Contact Size 12 16 8 16 12 16 12 A F C B F A E A A E B B F J K M A G F E G L E B C D G G B H H N E D C D D P C C R D S Insert Arrangement 22-34 24-2 24-3 24-5 24-6 D D D A A, G, H = D; Bal. = A Service Rating Number of Contacts 3 2 7 2 5 16 8 Contact Size 12 16 12 12 16 16 12 A L K P A B F C M B N J A E B C A G A B D E F E D D I O H Insert Arrangement E G D C G C F H 24-7 24-9 24-10 24-11 A A A A Service Rating B I 24-12 A Number of Contacts 2 14 2 7 3 6 2 3 Contact Size 12 16 4 8 8 12 4 12 CONTACT LEGEND * A, C, E, G = Iron B, D, F, H = Constantan 23 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A D F B E A J C G E H K B H C L G C A B B G J F D E Service Rating C B E D Insert Arrangement A D F A D C K 24-16 24-17 24-20 24-21 24-22 A, B, F, G = D; C, D, E, = A D D D D Number of Contacts 1 3 3 2 3 2 9 1 9 4 Contact Size 8 12 16 12 16 12 16 8 16 8 A H A A F E B K L R G E B F C G N M S T A J L A B J P G Q J C P H M C V U C N G D W X Y D C B Z F Insert Arrangement K B D H F D E E 24-27 24-28 28-1 28-2 28-3 Service Rating E Inst. A, J, E = D; Bal. = A D E Number of Contacts 7 24 3 6 2 12 3 Contact Size 16 16 8 12 12 16 8 S A C P G A B E D A E Service Rating A F D Insert Arrangement B B C C B 28-4 28-5 28-6 28-7 G, P, S = E; Bal. = D D D D Number of Contacts 2 7 2 1 2 3 2 Contact Size 12 16 4 12 16 4 4 CONTACT LEGEND 24 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated H J A H M K G J F A G B E K M F L L B C V R W S K L E D D D 28-8 28-9 28-10 D G = D; Bal. = A A 10 6 6 2 2 3 4 18 Contact Size 12 16 12 16 4 8 12 12 16 A M 100 S a b N C U d V X K b H C U d Y F V W X K J H P D A B C D E F G J K L M R X Z G A T L S C H R Q G F N P D k m l B M U V h f j H K W g e d F J c b a N V U T S Y E L G J B T Z M E L W A S a D Y R P B T Z C 28-11 2 N B H I Number of Contacts R A G D T C L, M = E; B = D; Bal. = A P E F M C Service Rating P X E Insert Arrangement J N U G B F A E 100 Rotation of 28-12 Insert Arrangement 28-12 28-13 28-15 Service Rating A A A A Number of Contacts 26 26 35 20 Contact Size 16 16 16 16 C B H D J E L A G R A L K A B K F C M K C E D J M E H N Service Rating B L M P Insert Arrangement 28-16 G J F G H 28-17 28-18 28-19 R = B; M, N, P = D; A to L = A M = C; G, H, J, K, L = D; A, B = A; Bal. = Inst. H, M = B; A, B = D; Bal. = A Number of Contacts 15 12 4 6 Contact Size 16 16 12 16 CONTACT LEGEND 25 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A J B N E K S C n F Insert Arrangement k j F R E r B Z B f m E p E A J X e d h C P W V c b g H N U a D M L T L M G D G F K P H A C A B D D C s 28-20 28-21 28-22 32-1 A A D A = E; B, C, D, E = D Service Rating Number of Contacts 10 4 37 3 3 2 3 Contact Size 12 16 16 4 16 0 12 B F A A C E D E G F A K A L B C B O H G D J M D H C E N B J Insert Arrangement 32-2 32-3 32-4 32-5 E D F, J, K, N = A; Bal. = D D Service Rating Number of Contacts 3 2 1 2 2 4 2 12 2 Contact Size 4 16 0 4 12 16 12 16 0 A B G H C E K P L M X d N R h e S T V X S L Z T M a g A G B a D e P W R S D H E F I J G K L L M N O 32-6 32-7 32-8 A A, B, h, j = Inst.; Bal. = A A Service Rating C C G X B B F K b I b A A E J V d D I O Z C N V Insert Arrangement U c H U H N Y K Y f k U T E R F j O W J c F J I M P W D 32-9 D Number of Contacts 2 3 2 16 7 28 6 24 2 12 Contact Size 4 8 12 16 12 16 12 16 4 16 CONTACT LEGEND 26 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A F A M C E N B A G B E D H F G J X L K A B P R B C Y W K S C D D E Z V J D C L M T N E F U H O Insert Arrangement Service Rating H F P G G 32-10 32-12 32-13 A, F = E; G = B; B, E = D; C, D = A C, D, E, F, G = A; Bal. = D D 32-15 D Number of Contacts 2 2 3 5 10 5 18 2 6 Contact Size 4 8 16 12 16 12 16 0 12 A 100 E G H P L M J A N S m T V AB C X k q x w F G H J K L M N r v y z I f j u t B E C W e p n B a Z d h g D R V U Y c s U P O X b A J M L T S N O H K F R E G F D W B D C D I K A B C O AC P R S U V W T AA AD AE AG AF 100 Rotation of 32-6 Insert Arrangement 32-16 32-17 32-22 A D A Service Rating 36-1 D Number of Contacts 2 3 2 16 4 54 4 18 Contact Size 4 8 12 16 4 16 12 16 A A A A F F D E B B B E C C B C D C Insert Arrangement D 36-3 36-4 36-5 36-6 D A = D; B, C = A A A Service Rating Number of Contacts 3 3 3 4 2 4 Contact Size 0 12 0 0 0 4 CONTACT LEGEND 27 16 12 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated A B D C H O I K L P U Y Z h d j B J G N M R W f g n u Y T m w U n s f H b F R L X G y z T N z Insert Arrangement 36-7 36-8 A A Service Rating 36-9 A Number of Contacts 7 40 1 46 1 2 14 14 Contact Size 12 16 12 16 4 8 12 16 A C H O V J P W d E R g h p n y Insert Arrangement V k r w v O c b j q u U a C H N T Z f t M S Y 100 G L Q e A F K X m B D J P W d s K m R Y z S g u M r w H U V c P W Q S n p z y 36-12 36-11 A A Number of Contacts 48 48 48 Contact Size 16 16 16 S A K P A C K c P U d Q I S B T L R A R B k B Q H Q G F N H L m E N D M D E Insert Arrangement Service Rating X Z L Y J 36-13 36-14 36-15 N, P, Q = E; Bal. = A D M = D; Bal. = A Number of Contacts 2 15 5 5 6 35 Contact Size 12 16 8 12 16 16 CONTACT LEGEND 28 16 12 F G H K F E W g a M G D f b h C C V e j J s x 110 Rotation of 36-10 A M r w 100 Rotation of 36-10 J c k z 36-10 N U b j q v Service Rating P a h u N T Z g 110 G M R f t x F L Y e m s E K X d k B D J O b j q y N a h v C T Z p n t G L Q f A F E X e x B D B C K W c w x A P r t D E J V Y e e j I O d a p u v y V h k a R Z d c g s x P X p v r L M U Z H K M O b f m k t F J W c b C E D I S X a e N T S V S A E G F 8 4 0 QWL contact arrangements front face of pin insert or rear face of socket insert illustrated B A C 100 H R N d Z h j c b f k Y r Z d h j n u Y R G y x T N z 100 Rotation of 36-7 110 Rotation of 36-7 100 Rotation of 36-9 36-16 36-17 36-18 A A Service Rating F L X c A Number of Contacts 7 40 7 40 1 2 14 14 Contact Size 12 16 12 16 4 8 12 16 A C H E J A B B D F K G L M E L N C D H F M A K J N P R X S Y T V b a Z h e d U j T W a c f U V R c b j g k f v M J i N r T O U V Y AC a c d 40-1 D Number of Contacts 2 2 30 52 6 24 Contact Size 8 12 16 16 12 16 1 C G F H D E I J E U b N V P O Q X W K R Y L N S T P j e f l m p q Z g h i j K L AR AZ BJ AS BA w AT BB BK BL BS BD BM BT BE BN BU r AA AL AW AV AU BC z AK BP s 29 AB AM AX BF 20 g q y AJ 13 21 30 14 39 22 Service Rating 15 31 40 23 32 41 AY BH 48 49 58 BR 50 59 16 10 17 11 18 33 25 34 43 26 19 35 44 27 36 45 28 37 46 38 47 67 51 60 68 52 61 69 53 62 70 54 63 71 55 64 72 56 65 73 57 66 74 BV 75 u 76 77 78 83 79 84 40-9 40-56 A A D 1 22 24 85 85 Contact Size 8 12 16 16 16 CONTACT LEGEND 80 81 85 48-62 Number of Contacts 29 4 9 24 42 82 Insert Arrangement 3 8 AN s t 2 7 W f p x AH AF V d n 6 M U c b m v AE T a k u AD AP n r 5 D J S Z i t a o k H R Y h AC d c C 12 X M B F X b e A A S AF 36-52 B R W Z A A L P 36-20 Service Rating G K x w AB I AH AE Insert Arrangement h q AD F Z Y p AA z C E S g n u t y m X d m s k W B D H P B C K W b s y H f m p v w z Insert Arrangement g k r s x f t A P e c b a D E J d X I O V T W e a S R V M U Z N M U p m v w P g t u O J I L 100 110 G H K X a e n T S W V U E F J S B D C M L P Y E G I K O A D F 16 12 8 4 0 Special contact arrangements Requirements for more complex circuits prompted Amphenol to provide inserts not covered by the MS drawings. Illustrated here and on the following pages are insert layouts which have from one contact (high tension) to the 104 contact insert in shell size 44. Many of these special inserts are also available in alternate keyway arrangements. Please contact Amphenol, Sidney, NY for additional information on special circuit application requirements. front face of pin insert or rear face of socket insert illustrated M J A L A B A G F C E B C H D P T S K H E G A E D D B D E C C B B F Insert Arrangement A L R G F A C B C V J D N U K F 14S-A7 16-59 20-26 20-51 20-57 Service Rating A A A A A Number of Contacts 7 4 19 3* 7* 5 5 Contact Size 16 12 16 8 12 for #14 or 16 wire 12 16 A E G A C D C P F C F E D H M C N E J B L E M K B B D N D A K H H A B E Insert Arrangement J A F L F A G C H F C B B A 20-58 D 20-59 20-66 20-79 22-63 22-65 Service Rating A A H = D; Bal. = A A H = D; Bal. = A Number of Contacts 3* 1 5 7* 1* 4 8 8* 8 5 8 for #10 or 12 wire 16 12 for #10 wire 16 12 for #16 wire 12 16 12 for #14 or 16 wire 12 16 Contact Size L B E C K A D E B D H F J N A K F B D L M E D J Insert Arrangement H P B M C A A N A 22-70 A C E C C B 22-80 24-19 24-51 24-52 24-53 Service Rating A A A Hi-Volt A Number of Contacts 3* 12 5* 1 5* 3 3 8 for #10 or 12 wire 16 B, E for AN #10 or 12 wire A, C, D for AN #8 wire 12 8 8 12 16 Contact Size CONTACT LEGEND * Solderless 30 16 24-58 A 12 8 4 7 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated P L J N K R M H F L A F G E B J B R D C P C J A C M K E L 24-60 24-65 24-66 24-67 A A A D Inst. Number of Contacts 7 7 7* 11 4 7 19 Contact Size 12 16 8 for #10 or 12 wire 12 16 12 12 A F A G E F B E E E B F K B L D D R J N T P S G Q P B N T U J A C W X M K Z L 24-71 24-75 24-79 24-80 24-84 A A A Inst. A Service Rating C V H U V C Insert Arrangement M S R C H 90 E C D G A D D B F A G B N U 24-59 Service Rating C V T D F P S G C D D Insert Arrangement G E R H H E B N S D F A F M B 90 E A K A Number of Contacts 2* 5* 5 2 5 23 1 Contact Size 8 8 for #10 or 12 wire 8 8 for #16 wire 8 16 12 12 (Coax) RG-188/U or RG-174/U 16 15 14 12 21 9 4 E K C G F M L D N P B P K Q N M L A H J H R A L N S T B U C D T 26 8 5 19 20 10 3 25 18 B A 2 17 28 22 27 11 J 1 24 23 13 18 6 7 R S W X Y a M V U Z F C E E D H F J K Insert Arrangement 24-96 24-AJ 28-51 28-59 Service Rating Inst. A A A Number of Contacts 28 25 12 7 10 Contact Size 16 16 12 12 16 CONTACT LEGEND * Solderless 31 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated R P N M T A D S B A N B R M T K P M T K E J B R P L C D A N B R L C E C D K E J D A F T C S J B H H K Insert Arrangement P L M L A N C S H F S E H F F J 28-66 28-72 28-74 28-75 28-79 A - A A A Service Rating Number of Contacts 2 14 3 9* 4* 3* 9* 7* 7 9 Contact Size 8 12 4 (Coax) RG-59A/U or RG-62A/U 16 8 8 for #10 wire (S, T, R) 16 8 for #10 wire 8 16 1 13 1 H 2 3 G F 4 B A A D B C I 5 11 E F 23 10 5 8 6 7 28-82 28-84 28-AY 32-25 D A A A Service Rating Number of Contacts 2 4 9 4 5 25 Contact Size 8 12 8 4 16 12 A C D 1 16 2 15 3 17 18 14 26 27 25 13 24 23 11 10 19 31 20 29 21 22 8 6 7 9 Y 5 28 30 12 R 4 B E L K J S h T j i q b s J C g Y X W D F E v AA R F H b j k q T d m i h S c r U f n g V p s A CC a Z H p n z BB B X P L K f u t y x d m k r w c A P W N M 90 H N V U a Z F M 4 18 20 9 6 Insert Arrangement 15 16 17 22 21 J D 3 14 24 25 19 H G E 2 12 C B v u t E D C w G 90 CW Rotation of 32-15 Insert Arrangement Service Rating 32-31 32-48 32-52 32-53 A Inst. D t, u = E; Bal. = Inst. Number of Contacts 31 48 6 2 5 Contact Size 16 16 12 0 12 16 CONTACT LEGEND * Solderless 32 16 12 8 37 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated M T D U c I E F W K R F B 32-57 32-58 ** - Number of Contacts 24 6 6 2 Contact Size 16 12 for #10 wire 12 0 (Coax) RG-71/U A G F F H L P M D G N R O X O S c g T W U j p AD 2 16 Contact Size 4 8 12 16 21 20 19 18 17 16 33 15 32 14 44 Insert Arrangement M J N AC P R Q AG 32-68 A 4 8 (Coax) RG-124/U 16 16 4 (Coax) RG-58C/U 1 2 38 46 42 24 26 27 41 28 29 10 1 8 4 4 9 5 25 39 40 11 2 3 D A 3 45 12 L 12 23 43 30 r K 54 37 31 E H 1 35 13 G 2 22 36 34 F AE Inst. 1 D C v y 32-64 2 q AA ** Number of Contacts B f k u x 32-62 Service Rating W a e AF Insert Arrangement A R V t z X 8 (Coax) RG-124/U Z w AB 16 J d n s V 4 (Coax) RG-161/U or RG-179/U E Y h m U 8 P T S b A 15 M L N 32-60 4 H K J I K C D L B A B C E C M A K W D 32-56 Service Rating V X N G Insert Arrangement U Y E B H J T a L S Z A C C G b X D A S P D H F C B P a e A J V d B E O Z R A H N Y 8 6 5 9 7 10 11 12 E 6 7 6 2 7 13 8 9 14 15 3 5 17 4 18 16 C 19 B 32-73 32-75 32-76 Service Rating A 8, 9 = D A Number of Contacts 46 2 7 19 4 1 Contact Size 16 12 8 (Coax) RG-180B/U 12 4 8 CONTACT LEGEND ** Consult Amphenol, Sidney, NY for service rating of power contacts. 33 32-79 D 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated A B D F H K N C X G H K L c n m q AB y D AA C q L R 32-AF 36-51 A D P M N 36-54 A Number of Contacts 4 12 55 2 2 8 31 Contact Size 4 16 16 0 4 8 16 b a A C X q M N W X c H f p g T L V d Insert Arrangement Service Rating P N S T Z a b n p v i q w j r x s z y AA AE AC k Y t AB h L P U g m k p v r B c f t u D X b e d j T S W a n AF N M R V Z AH AD M J I K A E G H O h B D F U R Y g L R P f m u J K h S A C K J F n i C D H F E d t r j D m s k W U E c Y V A B B s w x y AJ C z 36-55 36-59 36-60 36-64 A A ** - Number of Contacts 31 8 50 3 40 7 Contact Size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire A B E D B M N V W X c d m u P n g p w y 48 T U Z a b i r x j s z AA F 50 B 55 58 63 67 E 80 61 65 69 73 77 86 AF 75 79 82 83 85 AH AD 66 70 74 78 81 87 91 88 D 89 90 AJ Insert Arrangement 64 72 76 57 60 68 71 C G 52 54 56 59 62 k t AB 49 51 53 84 AE AC C A S h q 0 (Coax) RG-11/U, RG-12/U or RG-13/U K J R Y f v H F L 4 C D A J K h B A Z f p S AG H g T AE 32-82 Service Rating F n i U AC AH AD AF Insert Arrangement j v x z R Q V r u t w P f E d t r k p s J N W e j h D m s k W a d g M R Z C X V Y b F P U T E M O S D B c Y J L A Z E G b a A B C A 36-65 36-71 36-73 Service Rating - A - Number of Contacts 4 3 50 7 43 1 0 (Coax) RG-59/U, RG-62/U or RG-71/U 12 16 4 (Coax) RG-62B/U 16 8 (Coax) RG-187/U Contact Size CONTACT LEGEND ** Consult Amphenol, Sidney, NY for service rating of power contacts. 34 36-74 A 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 1 31 29 28 27 33 30 26 3 34 36 48 5 6 6 7 38 40 4 9 39 9 8 10 13 47 24 46 23 22 42 45 21 43 13 44 15 20 18 31 14 19 32 33 35 13 G 7 39 4 44 45 17 47 D 6 5 36-75 36-76 36-77 Service Rating A A D Number of Contacts 48 47 7 2 12 16 for #14 wire 16 4 16 8 Contact Size 1 36-78 A 1 3 4 5 2 3 4 Q 5 F B 7 8 11 12 13 9 10 6 7 8 14 15 11 12 13 9 10 14 15 A U V W G M h g Z Y a 16 17 18 19 16 17 18 19 Insert Arrangement 20 K E F X L D 20 D f m j b C C e k N E B T d c P 6 S R A 2 3 12 C 42 46 Insert Arrangement E 34 43 19 14 26 30 38 41 2 11 8 21 25 29 37 40 1 9 17 20 24 B 12 16 28 36 F 11 15 23 27 16 8 10 18 11 12 10 A 5 7 14 22 25 2 3 4 37 35 41 1 2 32 G J H 36-79 36-80 36-83 36-85 Service Rating A A - M = D; Bal. = A Number of Contacts 20 20 7 35 Contact Size 12 12 for #10 wire 4 (Coax) RG-58/U 16 for #12 wire A d z y w g N X M W L c Z b a U C J s h S D T E G H N j m C n r q B k F V K t Insert Arrangement R Y u B P O v f A Q x e G p 36-97 36-AF 40-5 Service Rating C A A Number of Contacts 1 48 5 4/0 16 0 Contact Size CONTACT LEGEND 35 16 12 8 4 0 4/0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 16 C F G 27 P Q M 33 26 12 R S T V X W c Y 24 a 58 50 8 14 40-35 A D 40-53 A Number of Contacts 4 9 16 35 60 Contact Size 4 8 16 12 16 1 1 3 8 9 10 1 2 4 5 11 6 24 7 12 23 13 14 22 15 21 16 17 25 33 18 26 34 42 4 2 50 19 27 35 43 51 20 28 36 44 21 29 37 45 52 22 30 38 46 23 31 39 47 24 48 50 48 35 15 12 A Number of Contacts 4 1 3 55 60 Contact Size 0 8 12 16 16 21 41 54 40 20 38 28 17 58 16 48 10 12 V k b K 9 33 13 m 8 34 14 c 32 35 15 C U D q 7 31 49 T j n d L 30 S i p 6 47 50 1 B R g f 29 57 36 M 5 46 51 37 A h 45 59 18 Insert Arrangement 44 61 52 4 56 60 39 A N 3 27 43 40-62 P 2 26 55 53 19 1 25 11 13 58 40-61 24 X a 2 E Z Y 3 F J 11 4 W H 40-63 40-64 40-66 Service Rating A - - Number of Contacts 61 Contact Size 16 for #14 wire 9 10 33 E 42 8 31 32 34 40-57 23 7 30 47 49 Service Rating 22 29 57 58 14 Insert Arrangement 6 45 46 36 16 5 28 56 59 37 59 55 51 18 56 44 60 38 49 4 27 52 17 57 54 39 3 26 43 53 19 41 55 41 20 2 25 42 40 32 40 54 53 3 9 10 11 12 40-10 Service Rating 32 34 13 8 31 33 35 7 30 48 49 36 15 9 46 47 59 37 16 7 22 23 17 b Z Insert Arrangement 10 38 51 6 6 60 57 18 21 5 29 52 5 31 11 U 4 28 45 55 56 19 20 32 25 O 53 3 27 44 39 30 35 2 26 43 54 40 20 4 19 L I 3 29 34 1 25 42 41 21 13 N 22 2 18 14 H K 24 23 17 28 E D J 1 15 A B 3 20 12 16 13 4 8 (Coax) RG-124/U CONTACT LEGEND 36 0 (Coax) RG-63B/U 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated A A N B 1 P M B W E D F H 11 C X V K 19 D S 12 20 28 J 36 J E T U 13 21 29 37 45 22 38 F M Insert Arrangement 23 39 41 55 59 40-68 A A A 10 21 61 Contact Size 16 4 (Coax) RG-59/U 8 16 A 44 52 57 61 22 42 21 41 54 40 20 C D E J 18 44 28 29 30 57 47 36 16 9 33 34 14 13 3 8 32 35 M 4 48 49 15 L 7 31 58 50 5 6 46 59 37 2 5 45 56 51 17 K 43 6 4 27 61 52 1 3 26 60 39 38 H 2 25 55 53 19 1 24 23 B 10 11 12 40-72 40-73 A A Service Rating 43 51 40-70 1 Insert Arrangement 42 27 35 G Number of Contacts F 18 26 34 50 56 60 17 25 33 49 40-67 Service Rating 24 40 54 10 16 32 48 58 9 15 31 47 5 8 14 30 46 4 7 53 H L K 3 6 R L C 2 40-74 A Number of Contacts 1 10 61 1 1 4 Contact Size 16 4 (Coax) RG-9B/U 16 12 4 (Coax) RG-62/U 0 (Coax) RG-9B/U or RG-214/U 1 A 1 B 5 6 2 3 7 8 4 9 10 11 5 12 4 20 2 C E D F H 21 29 37 J 13 22 30 38 46 14 23 31 39 47 24 40 17 25 33 41 49 55 59 16 32 48 54 3 15 26 34 42 50 56 60 18 35 43 51 57 61 19 27 28 36 44 52 45 53 58 62 L K M Insert Arrangement 40-75 40-80 40-81 E A A Service Rating Number of Contacts 1 4 1 10 62 Contact Size 12 0 16 4 16 for #14 wire CONTACT LEGEND 37 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 1 5 12 20 6 13 21 2 3 7 14 22 4 8 9 15 23 16 24 17 25 24 23 10 22 11 18 26 27 41 21 19 28 1 53 1 44 28 45 39 29 30 31 32 33 34 35 36 38 39 40 41 42 43 44 47 48 54 49 55 50 56 51 57 52 57 38 51 17 50 60 61 62 14 Insert Arrangement 32 34 13 4 2 9 10 4 3 11 12 3 40-82 40-85 40-86 40-87 Service Rating A A - D Number of Contacts 62 60 4 7 Contact Size 16 16 for #14 wire 0(Coax) RG-115A/U 4 20 38 A 37 B H 9 22 C 7 35 A 2 6 C M 10 18 G B N 21 8 19 36 2 8 31 33 35 15 48 49 36 16 59 58 37 7 30 47 59 53 58 7 46 45 18 46 5 6 60 52 37 5 29 56 19 1 4 27 55 6 3 26 43 54 40 20 2 25 42 D B 23 3 1 34 A L 24 11 E 17 5 E 33 D F 4 16 32 14 29 G 28 40-AD 40-AG 40-AP A A E Service Rating F J 27 30 H K 26 13 31 Insert Arrangement 25 12 15 40-AR Inst. Number of Contacts 4 4 38 2 7 3 3 Contact Size 8 0 12 4/0 12 4 0 31 18 28 35 9 7 27 15 11 3 14 40 34 6 12 25 24 38 39 1 26 17 37 16 5 4 23 13 E 2 25 10 2 1 16 36 8 19 29 17 33 34 32 30 18 P 26 27 28 29 30 31 32 33 35 36 37 38 40 41 42 43 F A B 3 19 N A 4 D 39 20 5 C 20 M 12 24 15 22 13 21 14 Insert Arrangement 22 H 6 21 11 23 C 7 10 9 L J K 8 40-AS 40-AT 40-AU A A A Service Rating B G 40-AV D Number of Contacts 15 25 24 18 1 3 10 1 3 Contact Size 16 12 12 16 8 4 8 16 2/0 CONTACT LEGEND 38 16 12 8 4 0 2/0 4/0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 30 A C L D B E M F N P J R R K S T g f r W AP Y h s AC X t AD AR i AE a j u AS Z B k v AF AT m w AU AJ n AV z AK AW 27 AZ V BC BN BD BP BY BE BR BZ CH BF BS CA CJ BH BT CB CK BJ BU CC CL CR BK BV CD CM BL BW CE CN 23 k X c BX F 44-52 44-53 A A Service Rating 7 8 C B 36 37 9 11 38 42 13 40 14 16 18 43 10 12 39 44 J Insert Arrangement A 45 19 H K D 46 21 20 Z a L CS E Y b CF CP 47 22 BM M 35 48 BA q 49 24 D j m 6 25 W n d BB i p f N 5 34 31 26 C 4 32 52 50 U g AB AN AM AY h q AA AL AX P d p y x AH c 33 51 U b 3 28 T V 2 1 29 A S H 41 17 15 48-51 A Number of Contacts 104 18 18 42 10 4 Contact Size 16 16 8 (Coax) RG-124/U 16 8 0 (Coax) RG-41/U 31 1 32 2 3 A 30 44 29 A 43 34 5 28 42 51 26 C D E F G H J 6 52 27 B 4 33 45 53 56 7 35 46 K L M N P R 8 25 S B D T U V W X Z 9 24 23 22 55 50 41 E 48 21 g j k m n p r s 15 48-52 Service Rating h 16 17 Insert Arrangement f 14 C 18 e d 12 13 19 c b 10 11 37 38 39 20 47 36 49 40 a 54 48-53 A D Number of Contacts 56 5 37 Contact Size 16 0 (Coax) RG-41/U 12 CONTACT LEGEND 39 16 12 8 4 0 Special contact arrangements front face of pin insert or rear face of socket insert illustrated 30 2 1 29 35 28 27 4 33 51 50 32 34 31 26 6 25 49 7 8 24 23 47 22 D A C B 36 46 21 20 11 38 42 45 19 9 18 43 Insert Arrangement 72 67 28 68 55 27 26 25 65 48 51 23 22 49 20 21 16 48-55 A 42 10 4 68 2 2 6 Contact Size 16 0 (Coax) RG-59/U 16 12 8 4 2 1 30 27 4 33 26 27 48 23 47 D A C B 7 8 23 37 42 9 11 10 12 39 13 40 44 47 22 21 20 Insert Arrangement C B 7 8 36 37 42 45 19 9 11 13 14 16 18 43 15 41 17 15 48-60 A A Number of Contacts 42 10 4 42 10 4 Contact Size 16 0 16 0 (Coax) RG-214/U 8 10 12 39 40 44 48-57 Service Rating A 38 41 17 D 46 14 16 18 43 35 48 38 45 49 24 36 46 19 6 25 35 5 34 31 26 6 49 24 4 32 52 50 34 31 33 51 5 32 52 50 21 20 3 28 51 22 2 1 29 3 28 25 15 17 18 19 12 13 14 47 52 Number of Contacts 30 46 64 50 53 24 A 29 11 45 63 66 54 48-54 8 10 76 71 15 Service Rating 8 9 41 17 7 44 70 69 14 16 43 75 74 73 6 42 56 13 40 44 10 5 61 62 30 12 39 4 41 78 29 37 39 77 57 31 35 48 58 3 40 1 60 59 33 5 32 52 34 2 38 37 36 3 CONTACT LEGEND 40 8 16 12 8 4 0 QWL - accessories cabling information The Amphenol(R) QWL series of electrical connectors has been designed with the problems of multi-conductor cable users in mind. Two of these problems, namely water proofing and strain relief, are solved by the radial inward compression of an internal neoprene gland in the various cable accessories shown on the following pages. For additional strain relief beyond that provided by the gland, both cable grips and bar clamps are available. Since the glands close down from .094" to .145" (depending on shell size), the optimum condition for cable users is to select a gland with an I.D. only slightly larger than the maximum O.D. of the cable. The inside diameter of the accessory housing determines the maximum diameter of the cable as shown in the tabulation below. Smaller sizes than those shown in each shell size can be accommodated by smaller compression glands. Different cable manufacturers use different constructions and cable lays in manufacturing multi-conductor cable. The specific cabling manufacturing specification should be known by the customer in detail in order to properly figure each QWL application. This knowledge can save many individual wire crossovers in any given run of cable. Crossovers add materially to the cable diameter without a cable accessory. In those cases where diameter buildup is impossible to avoid, special cable accessories with longer barrels are available. How to order information is covered in detail on pages 4 and 5. In selecting the base number below, care should be used, as some of the cable accessories are provided with protection cap attachment rings, while others are provided with the Kellems strain relief grip as shown. If a type or cable accommodation size is not found herein that fulfills your application, please contact Amphenol, Sidney, NY. All dimensions for reference only. Approx. Work Length (Internal) Minimum Housing Inner Diameter Maximum Cable Outer Diameter .250 .359 .359 .375 .484 .484 .750-20 .401 .609 .609 16 .875-20 .500 .734 .734 18 1.000-20 1.120 .859 .859 20 1.125-18 1.370 .984 .984 22 1.250-18 1.370 1.109 1.109 24 1.375-18 1.370 1.234 1.234 28 1.625-18 1.370 5.000 1.427 1.427 32 1.875-16 1.370 6.000 1.708 1.708 36 2.062-16 1.370 5.000 1.895 1.895 40 2.312-16 1.370 6.000 2.130 2.130 44 2.625-16 48 2.875-16 Shell Size QWL Connector Accessory Thd. 10 .500-28 12 .625-24 14 Short 2.218 Long 6.000 41 2.375 2.375 2.630 2.630 QWL - cable accessories 10-101332 Short barrel with grip 10-101335 Short barrel with attachment ring 10-101333 Short barrel without grip 10-130380 Short barrel length with attachment ring & strain relief bars 10-101334 Short barrel with grip & attachment ring 10-113637 Long barrel with attachment ring and grip 42 QWL - accessories 10-130380 cable sealing adapter (with clamp bars) H B F E D LEFT HAND A J G C A SECTION A-A Type I Straight C H B F E D LEFT HAND J G Type II Step Down H B F E D LEFT HAND A J G A C SECTION A-A Type III Step Up 43 QWL - accessories 10-130380 cable sealing adapter (with clamp bars) All dimensions are for reference only. Part Number* Used With Shell Size Cable Range D Thread Class 2B-LH E Free Max F +.010 -.020 G Dia. +.010 -.020 Max. Dia. H Max. J Max. 10-130380-141 14S .812 .750-20UNEF 1.125 1.782 .938 3.229 1.062 10-130380-142 I .938 .750-20UNEF 1.125 2.126 .938 3.573 1.125 III .875 .938 .750-20UNEF 1.125 2.126 .938 3.573 1.125 III 1.000 1.062 .875-20UNEF 1.250 2.282 1.062 3.854 1.375 III 3.854 1.375 III 3.834 1.125 I 1.688 III 4.677 1.562 III 4.104 1.125 II 4.776 1.688 III 1.188 4.607 1.812 III 1.188 4.365 1.375 I 2.933 1.312 4.677 1.562 I 1.250 2.631 1.312 4.365 1.375 II 1.125-18UNEF 1.250 2.996 1.312 4.740 1.688 III 1.125-18UNEF 1.250 2.933 1.312 4.677 1.562 I 1.250 1.125-18UNEF 1.250 3.062 1.312 4.807 1.812 III 1.062 1.125 1.125-18UNEF 1.250 2.933 1.312 4.677 1.562 I 1.312 1.250 1.125-18UNEF 1.250 3.063 1.312 4.807 1.812 III .696 1.062 1.250 1.250-18UNEF 1.250 2.933 1.438 4.677 1.562 II .626 1.062 1.250 1.250-18UNEF 1.250 2.933 1.438 4.677 1.562 II 1.130 1.005 1.780 1.375 1.250-18UNEF 1.500 3.266 1.438 5.250 2.469 III 22 .680 .567 1.312 1.375 1.250-18UNEF 1.250 3.059 1.438 4.803 1.812 III 24 .900 .787 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I 10-130380-243 24 1.180 1.055 1.780 1.812 1.375-18UNEF 1.500 3.204 1.562 5.198 2.469 III 10-130380-244 24 .680 .567 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I 10-130380-245 24 .630 .517 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I 10-130380-246 24 1.000 .875 1.546 1.625 1.375-18UNEF 1.500 3.121 1.562 5.115 2.125 III 10-130380-247 24 .805 .692 1.312 1.375 1.375-18UNEF 1.250 3.059 1.562 4.803 1.812 I 10-130380-281 28 1.310 1.185 1.780 1.875 1.625-18UNEF 1.500 3.184 1.812 5.178 2.469 III 10-130380-282 28 .970 .857 1.312 1.625 1.625-18UNEF 1.250 3.059 1.812 4.803 1.812 II 10-130380-283 28 .880 .755 1.546 1.625 1.625-18UNEF 1.500 3.121 1.812 5.115 2.125 I 10-130380-284 28 1.427 1.320 2.000 1.875 1.625-18UNEF 1.500 3.184 1.812 5.178 2.625 III 10-130380-321 32 .970 .875 1.312 1.875 1.875-16UN 1.250 3.059 2.062 4.803 1.812 II 10-130380-322 32 1.230 1.105 1.780 1.875 1.875-16UN 1.500 3.184 2.062 5.178 2.469 I 10-130380-323 32 1.328 1.240 1.780 1.875 1.875-16UN 1.500 3.184 2.062 5.178 2.469 I 10-130380-324 32 .750 .637 1.312 1.875 1.875-16UN 1.250 3.059 2.062 4.803 1.812 II 10-130380-325 32 1.055 .958 1.546 1.875 1.875-16UN 1.500 3.121 2.062 5.115 2.125 II 10-130380-326 32 1.375 1.250 2.000 2.062 1.875-16UN 1.500 3.246 2.062 5.240 2.625 III 10-130380-361 36 1.310 1.185 1.780 2.062 2.0625-16UN 1.500 3.184 2.312 5.178 2.469 II 10-130380-362 36 1.900 1.775 2.438 2.312 2.0625-16UN 1.625 3.500 2.312 5.619 3.171 III 10-130380-363 36 1.530 1.406 2.000 2.062 2.0625-16UN 1.500 3.246 2.312 5.240 2.625 I 10-130380-364 36 1.445 1.320 2.000 2.062 2.0625-16UN 1.500 3.246 2.312 5.240 2.625 I 10-130380-365 36 .805 .692 1.312 2.062 2.0625-16UN 1.250 3.059 2.312 4.803 1.812 II 10-130380-366 36 .603 .511 1.000 2.000 2.0625-16UN 1.250 2.875 2.312 4.619 1.375 II 10-130380-367 36 1.000 .875 1.546 2.062 2.0625-16UN 1.500 3.121 2.312 5.115 2.125 II 10-130380-401 40 1.730 1.605 2.438 2.500 2.3125-16UN 1.625 3.469 2.562 5.588 3.171 III 10-130380-402 40 1.310 1.185 1.780 2.312 2.3125-16UN 1.500 3.184 2.562 5.178 2.469 II 10-130380-403 40 1.180 1.055 1.780 2.312 2.3125-16UN 1.500 3.184 2.562 5.178 2.469 II 10-130380-404 40 1.109 .984 1.546 2.312 2.3125-16UN 1.500 3.121 2.562 5.115 2.125 II 10-130380-441 44 1.900 1.775 2.438 2.750 2.625-16UN 1.625 4.281 2.875 6.588 3.171 II Min. Dia. B +.000 -.010 C +.010 -.000 .460 .366 .750 14S .438 .344 .875 10-130380-143 14S .375 .306 10-130380-161 16S .530 .436 10-130380-162 16S .605 .511 1.000 1.062 .875-20UNEF 1.250 2.282 1.062 10-130380-171 16 .500 .406 .875 .938 .875-20UNEF 1.125 2.215 1.062 10-130380-181 18 .828 .715 1.188 1.250 1.000-20UNEF 1.250 3.032 1.188 4.776 10-130380-182 18 .699 .605 1.062 1.125 1.000-20UNEF 1.250 2.933 1.188 10-130380-183 18 .500 .406 .875 1.094 1.000-20UNEF 1.125 2.485 1.188 10-130380-184 18 .562 .449 1.188 1.250 1.000-20UNEF 1.250 3.032 1.188 10-130380-185 18 .750 .637 1.312 1.000 1.000-20UNEF 1.250 3.063 10-130380-186 18 .530 .436 1.000 1.062 1.000-20UNEF 1.250 2.621 10-130380-201 20 .625 .531 1.062 1.125 1.125-18UNEF 1.250 10-130380-202 20 .605 .511 1.000 1.125 1.125-18UNEF 10-130380-203 20 .628 .715 1.188 1.125 10-130380-204 20 .720 .626 1.062 1.125 10-130380-205 20 .900 .787 1.312 10-130380-206 20 .625 .531 10-130380-207 20 .750 .637 10-130380-221 22 .790 10-130380-222 22 .720 10-130380-223 22 10-130380-224 10-130380-242 *For complete order number see pages 4 and 5. 44 Type QWL - accessories 10-10133X cable sealing adapter H E B F K* OPTIONAL D LEFT HAND A G C A SECTION A-A Type I Straight H C B K* OPTIONAL E F D LEFT HAND G Type II Step Down H B K* OPTIONAL E F D LEFT HAND A G A *Wire grip dimensions (K) apply to 10-101332 and 10-101334 assemblies only. 45 C SECTION A-A Type III Step Up QWL - accessories 10-10133X cable sealing adapter All dimensions are for reference only. Used With Shell Size Max. Dia. Min. Dia. B +.000 -.010 C +.010 -.000 D Thread Class 2B-LH E Free Max. F +.010 -.020 G Dia. +.010 -.020 H .045 K Free Approx. 10-10133X-121 12S .281 .219 .750 .812 .6250-24NEF .500 1.938 .812 2.750 2.844 III 10-10133X-122 12S .500 .406 1.062 1.000 .6250-24NEF .562 2.875 .812 3.750 4.688 III 10-10133X-123 12S .405 .316 1.000 .812 .6250-24NEF .562 2.548 .812 3.422 3.688 III 10-10133X-141 14S .337 .281 .750 .812 .7500-20UNEF .500 1.782 .938 2.594 3.344 I 10-10133X-142 14S .222 .160 .625 .812 .7500-20UNEF .562 1.782 .938 2.532 2.406 II 10-10133X-143 14S .281 .219 .750 .812 .7500-20UNEF .500 1.782 .938 2.594 2.844 I 10-10133X-144 14S .530 .441 1.000 .812 .7500-20UNEF .562 2.719 .938 3.594 4.688 III Part Number* Cable Range Type 10-10133X-145 14S .463 .406 .875 .938 .7500-20UNEF .500 2.126 .938 2.938 4.344 III 10-10133X-146 14S .405 .316 1.000 .812 .7500-20UNEF .562 2.719 .938 3.594 3.688 III 10-10133X-151 14 .405 .316 1.000 .812 .7500-20UNEF .562 2.719 .938 3.765 3.688 III 10-10133X-161 16S .463 .406 .875 .938 .8750-20UNEF .500 1.844 1.062 2.656 4.344 I 10-10133X-162 16S .589 .511 1.000 1.062 .8750-20UNEF .562 2.282 1.062 3.156 5.188 III 10-10133X-163 16S .625 .580 1.062 1.125 .8750-20UNEF .562 2.933 1.062 3.807 6.188 III 10-10133X-164 16S .405 .316 1.000 1.062 .8750-20UNEF .562 2.282 1.062 3.156 3.688 III 10-10133X-165 16S .530 .441 1.000 1.062 .8750-20UNEF .562 2.282 1.062 3.156 4.688 III 10-10133X-166 16S .699 .605 1.062 1.125 .8750-20UNEF .562 2.933 1.062 3.807 6.188 III 10-10133X-167 16S .281 .219 .750 .938 .8750-20UNEF .500 1.844 1.062 2.656 2.844 II 10-10133X-171 16 .589 .511 1.000 1.062 .8750-20UNEF .562 2.621 1.062 3.667 5.188 III 10-10133X-172 16 .438 .400 .875 .938 .8750-20UNEF .500 2.215 1.062 3.199 4.344 I 10-10133X-173 16 .625 .580 1.062 1.125 .8750-20UNEF .562 2.933 1.062 3.979 6.188 III 10-10133X-174 16 .530 .441 1.000 1.062 .8750-20UNEF .562 2.621 1.062 3.667 4.688 III 10-10133X-175 16 .405 .316 1.000 1.062 .8750-20UNEF .562 2.621 1.062 3.667 3.688 III 10-10133X-181 18 .589 .511 1.000 1.062 1.0000-20UNEF .562 2.621 1.188 3.667 5.188 I 10-10133X-182 18 .625 .580 1.062 1.125 1.0000-20UNEF .562 2.933 1.188 3.979 6.188 III 10-10133X-183 18 .530 .441 1.000 1.062 1.0000-20UNEF .562 2.621 1.188 3.667 4.688 I 10-10133X-184 18 .699 .605 1.062 1.125 1.0000-20UNEF .562 2.933 1.188 3.979 6.188 III 10-10133X-185 18 .405 .316 1.000 1.062 1.0000-20UNEF .562 2.621 1.188 3.667 3.688 I 10-10133X-186 18 .455 .361 1.062 1.125 1.0000-20UNEF .562 2.933 1.188 3.979 4.188 III 10-10133X-187 18 .750 .637 1.250 1.000 1.0000-20UNEF .562 3.063 1.188 4.109 6.688 III 10-10133X-188 18 .172 .078 .750 .938 1.0000-20UNEF .500 2.407 1.188 3.391 2.844 II 10-10133X-190 18 .805 .692 1.250 1.000 1.0000-20UNEF .562 3.063 1.188 4.109 6.688 III 10-10133X-201 20 .625 .580 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 6.188 I 10-10133X-202 20 .699 .605 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 6.188 I 10-10133X-203 20 .500 .406 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 4.688 I 10-10133X-204 20 .337 .281 .750 1.125 1.1250-18NEF .500 2.438 1.312 3.422 3.344 II 10-10133X-205 20 .828 .715 1.125 1.250 1.1250-18NEF .547 2.996 1.312 4.042 6.688 III 10-10133X-206 20 .375 .312 .875 1.125 1.1250-18NEF .500 2.469 1.312 3.453 3.844 II 10-10133X-207 20 .281 .219 .750 1.125 1.1250-18NEF .500 2.438 1.312 3.422 2.844 II 10-10133X-208 20 .455 .361 1.062 1.125 1.1250-18NEF .562 2.933 1.312 3.979 4.188 I 10-10133X-209 20 .589 .511 1.000 1.125 1.1250-18NEF .562 2.621 1.312 3.667 5.188 II 10-10133X-210 20 .530 .441 1.000 1.125 1.1250-18NEF .562 2.621 1.312 3.667 4.688 II 10-10133X-211 20 .900 .791 1.250 1.250 1.1250-18NEF .562 3.063 1.312 4.109 7.188 III *For complete order number see pages 4 and 5. 46 QWL - accessories 10-10133X cable sealing adapter All dimensions are for reference only. Part Number* Used With Shell Size Max. Dia. Cable Range Min. Dia. B +.000 -.010 C +.000 -.010 D Thread Class 2B-LH E Free .010 F +.010 -.020 G Dia. +.010 -.020 H .045 K Free Approx. 10-10133X-221 22 .699 .605 1.062 1.250 1.2500-18NEF .562 2.933 1.438 3.979 6.188 II 10-10133X-222 22 .750 .637 1.250 1.375 1.2500-18NEF .562 3.059 1.438 4.105 6.688 III 10-10133X-223 22 .445 .367 1.062 1.250 1.2500-18NEF .562 2.933 1.438 3.979 4.188 II 10-10133X-224 22 1.000 .875 1.500 1.375 1.2500-18NEF .562 3.121 1.438 4.167 7.188 III 10-10133X-225 22 .828 .715 1.125 1.250 1.2500-18NEF .594 2.996 1.438 4.072 6.688 I 10-10133X-226 22 .900 .791 1.250 1.375 1.2500-18NEF .562 3.059 1.438 4.105 7.188 III 10-10133X-227 22 .562 .453 1.125 1.250 1.2500-18NEF .594 2.996 1.438 4.074 5.188 I 10-10133X-228 22 1.101 .984 1.500 1.375 1.2500-18NEF .562 3.121 1.438 4.167 7.688 III 10-10133X-229 22 .589 .511 1.000 1.250 1.2500-18NEF .562 2.750 1.438 3.796 5.188 II 10-10133X-231 22 1.055 .958 1.500 1.375 1.2500-18NEF .562 3.121 1.438 4.167 7.688 III 10-10133X-241 24 1.000 .875 1.500 1.625 1.3750-18NEF .562 3.121 1.562 4.167 7.188 III 10-10133X-242 24 .562 .453 1.125 1.406 1.3750-18NEF .562 2.996 1.562 4.042 5.188 II 10-10133X-243 24 .750 .637 1.250 1.375 1.3750-18NEF .562 3.059 1.562 4.105 6.688 I 10-10133X-244 24 .900 .791 1.250 1.375 1.3750-18NEF .562 3.059 1.562 4.105 7.188 I 10-10133X-245 24 1.101 .984 1.500 1.625 1.3750-18NEF .562 3.121 1.562 4.167 7.688 III 10-10133X-246 24 .405 .316 1.000 1.375 1.3750-18NEF .562 2.750 1.562 3.796 3.688 II 10-10133X-247 24 .828 .715 1.125 1.406 1.3750-18NEF .562 2.996 1.562 4.042 6.688 II 10-10133X-248 24 .805 .692 1.250 1.375 1.3750-18NEF .562 3.059 1.562 4.105 6.688 I 10-10133X-249 24 1.130 1.005 1.750 1.812 1.3750-18NEF .562 3.204 1.562 4.250 7.188 III 10-10133X-281 28 1.055 .958 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 7.688 I 10-10133X-282 28 .900 .791 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 7.188 II 10-10133X-283 28 1.000 .875 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 7.188 I 10-10133X-284 28 .630 .535 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 5.688 II 10-10133X-285 28 .750 .637 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 6.688 II 10-10133X-286 28 1.180 1.099 1.750 1.875 1.6250-18NEF .562 3.184 1.812 4.230 8.188 III 10-10133X-287 28 1.101 .984 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 7.688 I 10-10133X-288 28 1.310 1.200 1.750 1.875 1.6250-18NEF .562 3.184 1.812 4.230 8.688 III 10-10133X-289 28 1.230 1.105 1.750 1.875 1.6250-18NEF .562 3.184 1.812 4.230 8.188 III 10-10133X-290 28 .880 .755 1.500 1.625 1.6250-18NEF .562 3.121 1.812 4.167 6.688 I 10-10133X-291 28 .957 .857 1.250 1.625 1.6250-18NEF .547 3.059 1.812 4.090 7.188 II 10-10133X-292 28 .828 .715 1.125 1.625 1.6250-18NEF .562 2.954 1.812 4.000 6.688 II 10-10133X-293 28 1.375 1.250 2.000 1.875 1.6250-18NEF .562 3.184 1.812 4.230 9.688 III 10-10133X-294 28 1.445 1.320 2.000 1.875 1.6250-18NEF .562 3.184 1.812 4.230 9.688 III 10-10133X-295 28 .805 .692 1.250 1.625 1.6250-18NEF .562 3.059 1.812 4.105 6.688 II 10-10133X-321 32 .880 .755 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 6.688 II 10-10133X-322 32 1.101 .984 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 7.688 II 10-10133X-323 32 .750 .637 1.250 1.875 1.8750-16N .562 3.059 2.062 4.105 6.688 II 10-10133X-324 32 1.445 1.320 2.000 2.062 1.8750-16N .672 3.246 2.062 4.292 9.688 III 10-10133X-325 32 1.180 1.099 1.750 1.875 1.8750-16N .562 3.184 2.062 4.230 8.188 I 10-10133X-326 32 .375 .312 .875 1.875 1.8750-16N .500 2.766 2.062 3.750 3.844 II 10-10133X-327 32 .957 .857 1.250 1.875 1.8750-16N .562 3.059 2.062 4.105 7.188 II 10-10133X-328 32 1.230 1.105 1.750 1.875 1.8750-16N .562 3.184 2.062 4.230 8.188 I 10-10133X-329 32 1.530 1.406 2.000 2.062 1.8750-16N .562 3.246 2.062 4.292 10.688 III 10-10133X-330 32 1.000 .875 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 7.188 II 10-10133X-331 32 1.375 1.250 2.000 2.062 1.8750-16N .562 3.246 2.062 4.292 9.688 III 10-10133X-332 32 1.750 1.875 1.8750-16N .562 3.184 2.062 4.230 8.688 I 32 (Oval) 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 6.688 II 10-10133X-334 32 1.310 .580 x .825 .500 x .705 1.200 10-10133X-333 (Oval) 1.500 1.875 1.8750-16N .562 3.121 2.062 4.167 6.688 II *For complete order number see pages 4 and 5. 47 Type QWL - accessories 10-10133X cable sealing adapter All dimensions are for reference only. Part Number* Used With Shell Size Max. Dia. Cable Range Min. Dia. B +.000 -.010 C +.000 -.010 D Thread Class 2B-LH E Free .035 F +.010 -.020 G Dia. +.010 -.020 H .045 K Free Approx. Type 10-10133X-335 32 .530 .441 1.000 1.625 1.8750-16N .562 2.875 2.062 3.921 4.688 II 10-10133X-336 32 .680 .567 1.250 1.875 1.8750-16N .562 3.059 2.062 4.105 6.688 II 10-10133X-337 32 .463 .406 .875 1.875 1.8750-16N .500 2.766 2.062 3.750 4.344 II 10-10133X-361 36 1.055 .958 1.500 2.062 2.0625-16N .562 3.121 2.312 4.167 7.688 II 10-10133X-362 36 1.445 1.320 2.000 2.062 2.0625-16N .562 3.246 2.312 4.292 9.688 I 10-10133X-363 36 1.530 1.406 2.000 2.062 2.0625-16N .562 3.246 2.312 4.292 10.688 I 10-10133X-364 36 1.230 1.105 1.750 2.062 2.0625-16N .562 3.184 2.312 4.230 8.188 II 10-10133X-365 36 .750 .637 1.250 2.062 2.0625-16N .562 3.059 2.312 4.105 6.688 II 10-10133X-366 36 .880 .755 1.500 2.062 2.0625-16N .562 3.121 2.312 4.167 6.688 II 10-10133X-367 36 1.656 1.531 2.250 2.312 2.0625-16N .562 3.308 2.312 4.354 12.688 III 10-10133X-368 36 1.101 .984 1.500 2.062 2.0625-16N .562 3.121 2.312 4.167 7.688 II 10-10133X-369 36 .957 .857 1.250 2.062 2.0625-16N .672 3.059 2.312 4.090 7.188 II 10-10133X-370 36 1.900 1.775 2.438 2.312 2.0625-16N .500 3.500 2.312 4.656 13.688 III 10-10133X-371 36 .375 .312 .875 2.062 2.0625-16N .500 2.813 2.312 3.797 3.844 II 10-10133X-372 36 1.825 1.700 2.438 2.312 2.0625-16N .672 3.500 2.312 4.656 13.688 III 10-10133X-373 36 1.375 1.250 2.000 2.062 2.0625-16N .562 3.246 2.312 4.292 9.688 I 10-10133X-374 36 1.562 1.437 2.250 2.312 2.0625-16N .562 3.308 2.312 4.354 11.188 III 10-10133X-375 36 1.730 1.605 2.438 2.312 2.0625-16N .672 3.500 2.312 4.656 13.688 III 10-10133X-376 36 .530 .441 1.000 1.875 2.0625-16N .562 2.875 2.312 3.921 4.688 II 10-10133X-377 36 1.130 1.005 1.750 2.062 2.0625-16N .562 3.184 2.312 4.230 7.188 II 10-10133X-378 36 1.180 1.055 1.750 2.062 2.0625-16N .562 3.184 2.312 4.230 8.188 II 10-10133X-379 36 1.595 1.470 2.250 2.312 2.0625-16N .562 3.308 2.312 4.354 11.688 III 10-10133X-401 40 1.310 1.200 1.750 2.312 2.3125-16N .562 3.184 2.562 4.230 8.688 II 10-10133X-402 40 1.656 1.531 2.250 2.312 2.3125-16N .562 3.308 2.562 4.354 12.688 I 10-10133X-403 40 1.101 .984 1.500 2.312 2.3125-16N .438 3.121 2.562 4.167 7.688 II 10-10133X-404 40 1.562 1.437 2.250 2.312 2.3125-16N .562 3.308 2.562 4.354 11.188 I 10-10133X-405 40 1.375 1.250 2.000 2.312 2.3125-16N .562 3.246 2.562 4.292 9.688 II 10-10133X-406 40 1.180 1.099 1.750 2.312 2.3125-16N .562 3.184 2.562 4.230 8.188 II 10-10133X-407 40 1.900 1.775 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III 10-10133X-408 40 1.730 1.605 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III 10-10133X-409 40 1.825 1.700 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III 10-10133X-410 40 1.984 1.859 2.438 2.500 2.3125-16N .672 3.469 2.562 4.625 13.688 III 10-10133X-411 40 1.445 1.320 2.000 2.312 2.3125-16N .562 3.246 2.562 4.292 9.688 II 10-10133X-412 40 2.062 1.937 2.750 2.500 2.3125-16N .672 3.500 2.562 4.656 14.188 III 10-10133X-413 40 2.100 1.955 2.750 2.500 2.3125-16N .672 3.500 2.562 4.656 14.188 III 10-10133X-414 40 2.145 2.000 2.750 2.500 2.3125-16N .672 3.500 2.562 4.656 14.188 III 10-10133X-415 40 .957 .857 1.250 2.125 2.3125-16N .562 3.063 2.562 4.109 7.188 II 10-10133X-416 40 1.230 1.103 1.750 2.312 2.3125-16N .562 3.184 2.562 4.230 8.188 II 10-10133X-417 40 1.055 .958 1.500 2.312 2.3125-16N .562 3.121 2.562 4.167 7.688 II 10-10133X-418 40 .630 .567 1.250 2.250 2.3125-16UN .562 3.063 2.562 4.109 6.688 II 10-10133X-441 44 2.170 2.025 2.750 2.625 2.6250-16UN .672 3.609 2.875 4.953 17.188 III 10-10133X-442 44 2.145 2.000 2.750 2.625 2.6250-16UN .672 3.547 2.875 4.891 14.188 III 10-10133X-443 44 2.250 2.105 2.750 2.625 2.6250-16UN .672 3.609 2.875 4.953 17.188 III 10-10133X-445 44 1.130 1.005 1.750 2.625 2.6250-16UN .562 3.969 2.875 5.203 7.188 II 10-10133X-446 44 1.109 .984 1.500 2.500 2.6250-16UN .562 3.905 2.875 5.140 7.688 II 10-10133X-449 44 1.445 1.320 2.000 2.562 2.6250-16UN .562 4.031 2.875 5.265 9.688 II 10-10133X-481 48 1.900 1.775 2.438 2.812 2.8750-16N .562 3.203 3.125 4.547 13.688 II 10-10133X-482 48 2.000 1.867 2.750 2.969 2.8750-16N .672 4.281 3.125 5.625 14.188 II 10-10133X-483 48 2.250 2.105 2.750 2.750 2.8750-16N .672 4.406 3.125 5.750 17.188 I 10-10133X-484 48 2.170 2.025 2.750 2.750 2.8750-16N .672 4.406 3.125 5.750 17.188 I *For complete order number see pages 4 and 5. 48 QWL - accessories 10-113637 cable sealing adapter (with woven strain relief) H E B F K D LEFT HAND A G C A SECTION A-A Type I Straight H C B E F K* Optional D LEFT HAND G Type II Step Down H E B K* Optional F D LEFT HAND A G A C SECTION A-A Type III Step Up 49 QWL - accessories 10-113637 cable sealing adapter (with woven strain relief) All dimensions are for reference only. Part Number* Used With Shell Size Max. Dia. Cable Range Min. Dia. B +.000 -.010 C +.010 -.000 E Free .035 F +.010 -.020 G Dia. +.010 -.020 H .045 K Free Approx. 10-113637-141 14S .337 .281 .750 .750 .7500-20UNEF .500 5.282 .938 6.094 3.344 10-113637-142 14S .405 .316 1.000 I 1.000 .7500-20UNEF .562 5.500 .938 6.374 3.688 III 10-113637-143 14S .530 .441 10-113637-144 14S .463 .406 1.000 1.000 .7500-20UNEF .562 5.500 .938 6.374 4.688 III .875 .938 .7500-20UNEF .500 5.344 .938 6.156 4.344 10-113637-171 16 .699 III .605 1.062 1.125 .8750-20UNEF .562 5.563 1.062 6.609 6.188 III 10-113637-172 16 10-113637-181 18 .530 .441 1.000 1.000 .8750-20UNEF .562 5.500 1.062 6.546 4.688 III .828 .715 1.125 1.250 1.0000-20UNEF .562 6.657 1.188 7.703 6.688 10-113637-201 III 20 .750 .637 1.250 1.312 1.1250-18NEF .562 6.000 1.312 7.046 6.688 III 10-113637-202 20 .984 .875 1.500 1.625 1.1250-18NEF .562 6.750 1.312 7.796 7.188 III 10-113637-203 20 .900 .791 1.250 1.312 1.1250-18UNEF .562 6.000 1.312 7.046 7.188 III 10-113637-221 22 .750 .637 1.250 1.312 1.2500-18NEF .562 6.000 1.438 7.046 6.688 III 10-113637-222 22 .699 .605 1.062 1.312 1.2500-18NEF .562 5.063 1.438 6.109 6.188 II 10-113637-223 22 1.055 .958 1.500 1.625 1.2500-18NEF .562 6.750 1.438 7.796 7.688 III 10-113637-224 22 1.828 .715 1.125 1.250 1.2500-18NEF .562 5.625 1.438 6.671 6.688 I 10-113637-225 22 .589 .511 1.000 1.250 1.2500-18NEF .562 5.500 1.438 6.546 5.188 II 10-113637-241 24 .957 .857 1.250 1.375 1.3750-18NEF .562 6.000 1.562 7.046 7.188 I 10-113637-242 24 .750 .637 1.250 1.375 1.3750-18NEF .562 6.000 1.562 7.046 6.688 I 10-113637-243 24 1.101 .984 1.500 1.625 1.3750-18NEF .562 6.750 1.562 7.796 7.688 III 10-113637-244 24 1.000 .875 1.500 1.625 1.3750-18NEF .562 6.750 1.562 7.796 7.188 III 10-113637-245 24 1.180 1.055 1.750 1.812 1.3750-18NEF .562 6.813 1.562 7.859 8.188 III 10-113637-246 24 .805 .692 1.250 1.375 1.3750-18NEF .562 6.000 1.562 7.046 6.688 I 10-113637-281 28 1.000 .875 1.500 1.562 1.6250-18NEF .562 6.750 1.812 7.796 7.188 I 10-113637-282 28 1.900 1.775 2.438 2.438 1.6250-18NEF .672 8.125 1.812 9.281 13.688 III 10-113637-283 28 1.375 1.250 2.000 2.000 1.6250-18NEF .562 6.875 1.812 7.921 9.688 III 10-113637-284 28 .750 .637 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 6.688 II 10-113637-285 28 1.101 .984 1.500 1.562 1.6250-18NEF .562 6.750 1.812 7.796 7.688 I 10-113637-286 28 1.130 1.005 1.750 1.875 1.6250-18NEF .562 6.813 1.812 7.859 7.188 III 10-113637-287 28 .900 .791 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 7.188 II 10-113637-288 28 1.427 1.320 2.000 2.000 1.6250-18NEF .562 6.875 1.812 7.921 9.688 III 10-113637-289 28 1.180 1.099 1.750 1.875 1.6250-18NEF .562 6.812 1.812 7.858 8.188 III 10-113637-290 28 1.055 .958 1.500 1.562 1.6250-18NEF .562 6.750 1.812 7.796 7.688 I 10-113637-291 28 .957 .857 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 7.188 II 10-113637-292 28 1.310 1.200 1.750 1.875 1.6250-18NEF .562 6.813 1.812 7.859 8.688 III 10-113637-293 28 .530 .441 1.000 1.625 1.6250-18NEF .562 6.500 1.812 7.546 4.688 II 10-113637-294 28 1.230 1.105 1.750 1.875 1.6250-18NEF .562 6.813 1.812 7.859 8.188 III 10-113637-295 28 .630 .535 1.250 1.562 1.6250-18NEF .562 5.750 1.812 6.796 5.688 II D Thread Class 2B-LH *For complete order number see pages 4 and 5. 50 Type QWL - accessories 10-113637 cable sealing adapter (with woven strain relief) All dimensions are for reference only. Part Number* Used With Shell Size Max. Dia. Cable Range Min. Dia. B +.000 -.010 C +.010 -.000 D Thread Class 2B-LH E Free .035 F +.010 -.020 G Dia. +.010 -.020 H .045 K Free Approx. Type 10-113637-321 32 .828 .715 1.125 1.844 1.8750-16N .594 7.625 2.062 8.703 6.688 II 10-113637-322 32 1.310 1.200 1.750 1.812 1.8750-16UN .562 6.812 2.062 7.858 8.688 I 10-113637-323 32 1.130 1.005 1.750 1.812 1.8750-16UN .562 6.812 2.062 7.858 7.188 I 10-113637-324 32 1.375 1.250 2.000 2.000 1.8750-16UN .562 7.875 2.062 8.921 9.688 III 10-113637-325 32 1.445 1.320 2.000 2.000 1.8750-16UN .562 7.875 2.062 8.921 9.688 III 10-113637-326 32 1.180 1.099 1.750 1.812 1.8750-16UN .562 6.812 2.062 7.858 8.188 I 10-113637-327 32 1.656 1.531 2.250 2.250 1.8750-16UN .562 7.141 2.062 8.187 12.688 III II 10-113637-328 32 .970 .857 1.250 1.844 1.8750-16UN .562 6.688 2.062 7.734 7.188 10-113637-361 36 1.375 1.250 2.000 2.000 2.0625-16N .562 6.875 2.312 7.921 9.688 I 10-113637-362 36 1.000 .875 1.500 2.000 2.0625-16N .562 6.750 2.312 7.796 7.188 II 10-113637-363 36 1.920 x 1.140 oval 1.920 x 1.140 oval 2.438 2.438 2.0625-16N .672 8.125 2.312 9.281 13.688 III 10-113637-364 36 1.230 1.105 1.750 2.000 2.0625-16N .562 6.813 2.312 7.859 8.188 II 10-113637-365 36 1.562 1.437 2.250 2.250 2.0625-16N .562 6.938 2.312 7.984 11.188 III 10-113637-366 36 1.656 1.531 2.250 2.250 2.0625-16N .562 6.938 2.312 7.984 11.188 III 10-113637-367 36 1.445 1.320 2.000 2.000 2.0625-16N .562 6.875 2.312 7.921 9.688 I 10-113637-368 36 1.825 1.700 2.438 2.500 2.0625-16N .672 9.125 2.312 9.281 13.688 III 10-113637-369 36 1.895 1.775 2.438 2.438 2.0625-16N .672 8.125 2.312 9.281 13.688 III 10-113637-370 36 1.730 1.605 2.438 2.438 2.0625-16N .672 8.125 2.312 9.281 13.688 III 10-113637-371 36 1.310 1.200 1.750 2.000 2.0625-16N .562 6.813 2.312 7.859 8.688 II 10-113637-401 40 1.906 1.761 2.750 2.438 2.3125-16N .672 8.125 2.562 9.281 14.188 III 10-113637-402 40 1.940 1.815 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III 10-113637-403 40 1.900 1.775 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III 10-113637-404 40 1.825 1.700 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III 10-113637-405 40 1.310 1.200 1.750 2.250 2.3125-16N .562 7.813 2.562 8.859 8.688 II 10-113637-406 40 1.180 1.099 1.750 2.250 2.3125-16N .562 7.813 2.562 8.859 8.188 II 10-113637-407 40 1.230 1.105 1.750 2.250 2.3125-16N .562 7.813 2.562 8.859 8.188 II 10-113637-408 40 1.656 1.531 2.250 2.250 2.3125-16N .562 7.938 2.562 8.984 11.188 I 10-113637-410 40 2.145 2.000 2.750 2.438 2.3125-16N .672 8.125 2.562 9.281 14.188 III 10-113637-411 40 1.984 1.859 2.438 2.438 2.3125-16N .672 8.125 2.562 9.281 13.688 III 10-113637-412 40 1.940 1.815 2.438 2.438 2.3125-16N .672 11.125 2.562 12.281 13.688 III 10-113637-413 40 1.984 1.859 2.438 2.438 2.3125-16N .672 11.125 2.562 12.281 13.688 III 10-113637-414 40 2.100 1.955 2.750 2.625 2.3125-16N .672 12.000 2.562 13.156 14.188 III 10-113637-415 40 1.562 1.437 2.250 2.250 2.3125-16N .562 7.938 2.562 8.984 11.188 I 10-113637-416 40 1.445 1.320 2.000 2.312 2.3125-16N .562 6.875 2.562 7.921 9.688 II 10-113637-417 40 1.375 1.250 2.000 2.312 2.3125-16N .562 6.875 2.562 7.921 9.688 II *For complete order number see pages 4 and 5. 51 QWL - accessories 10-113637 cable sealing adapter (with woven strain relief) All dimensions are for reference only. Part Number* Used With Shell Size Max Dia Cable Range Min Dia B +.000 -.010 C +.010 -.000 D Thread Class 2B-LH E Free .035 F +.010 -.020 G Dia +.010 -.020 H .045 K Free Approx. Type 10-113637-441 44 2.100 1.955 2.750 2.750 2.6250-16UN .672 8.125 2.875 9.469 14.188 III 10-113637-442 44 2.250 2.105 2.750 2.875 2.6250-16UN .672 8.188 2.875 9.531 17.188 III 10-113637-443 44 2.000 1.867 2.750 2.750 2.6250-16UN .672 8.125 2.875 9.469 14.188 III 10-113637-444 44 1.500 1.375 2.250 2.500 2.6250-16UN .562 7.938 2.875 9.171 11.188 II 10-113637-445 44 1.730 1.605 2.438 2.750 2.6250-16UN .672 8.125 2.875 9.469 13.688 II 10-113637-446 44 .750 .637 1.250 2.625 2.6250-16UN .562 6.688 2.875 7.921 6.688 II 10-113637-447 44 1.825 1.700 2.438 2.750 2.6250-16UN .672 8.125 2.875 9.469 13.688 II 10-113637-448 44 2.145 2.000 2.750 2.750 2.6250-16UN .672 8.125 2.875 9.469 14.188 III 10-113637-449 44 2.170 2.025 2.750 2.875 2.6250-16UN .672 8.188 2.875 9.532 17.188 III 10-113637-450 44 1.375 1.250 2.000 2.625 2.6250-16UN .562 7.875 2.875 9.109 9.688 II 10-113637-481 48 2.250 2.105 2.750 2.750 2.8750-16N .672 8.188 3.125 9.532 14.688 I 10-113637-482 48 2.500 2.355 2.875 2.875 2.8750-16N .672 8.188 3.125 9.532 18.188 III 10-113637-483 48 2.375 2.230 2.875 2.875 2.8750-16N .672 8.188 3.125 9.532 18.188 III 10-113637-484 48 2.145 2.000 2.750 2.875 2.8750-16N .672 8.125 3.125 9.469 14.188 II 10-113637-485 48 2.000 1.867 2.750 2.875 2.8750-16N .672 8.125 3.125 9.469 14.188 II 10-113637-486 48 1.656 1.531 2.250 2.750 2.8750-16UN .562 7.937 3.125 9.171 12.688 II *For complete order number see pages 4 and 5. 52 QWL - accessories adapter, cable clamp 10-113196-XX adapter L D C V F E A 10-749XX-( ) cable clamp Z W Y This cable clamp is designed to be used with specific QWL insert arrangements. The locations, quantity, and sizes of holes in the clamp grommet must correspond to those in the connector for an effective moisture seal without wire crossing. Contact Amphenol, Sidney, NY, for grommet availability. Example: 10-107618-4P must use 10-74918-4 clamp. 53 QWL - accessories adapter, cable clamp, sealing plugs All dimensions for reference only. D Dia. +.010 -.020 W Min. Thd. Engage Adapter Part Number* Clamp Part Number* 10S 10-113196-10 10-74910-( ) .500-28UNEF .203 .922 .625 .562 1.234 .500-28UNEF .519 .807 .529 12S 10-113196-12 10-74912-( ) .625-24NEF .328 .969 .750 .688 1.281 .625-24NEF .519 .901 .524 12 10-113196-13 10-74913-( ) .625-24NEF .328 .954 .750 .688 1.438 .625-24NEF .519 .901 .524 14S 10-113196-14 10-74914-( ) .750-20UNEF .453 1.094 .875 .812 1.406 .750-20UNEF .519 1.026 .524 14 10-113196-15 10-74915-( ) .750-20UNEF .453 .954 .875 .812 1.438 .750-20UNEF .519 1.026 .524 A Thread Class 2A C +.010 -.000 E Dia. +.010 -.020 Shell Size F .010 L .010 V Thread Class 2B-LH Y Max. Z Max. 16S 10-113196-16 10-74916-( ) .875-20UNEF .578 1.094 1.000 .938 1.406 .875-20UNEF .519 1.119 .524 16 10-113196-17 10-74917-( ) .875-20UNEF .578 1.016 1.000 .938 1.500 .875-20UNEF .519 1.119 .524 18 10-113196-18 10-74918-( ) 1.000-20UNEF .676 1.141 1.188 1.062 1.625 1.000-20UNEF .519 1.229 .556 20 10-113196-20 10-74920-( ) 1.1875-18NEF .801 1.094 1.312 1.250 1.578 1.125-18NEF .505 1.479 .666 22 10-113196-22 10-74922-( ) 1.1875-18NEF .906 1.141 1.438 1.250 1.625 1.250-18NEF .519 1.479 .666 24 10-113196-24 10-74924-( ) 1.4375-18NEF 1.016 1.094 1.562 1.500 1.578 1.375-18NEF .519 1.666 .666 28 10-113196-28 10-74928-( ) 1.4375-18NEF 1.130 1.235 1.812 1.500 1.719 1.625-18NEF .519 1.666 .666 32 10-113196-32 10-74932-( ) 1.7500-18NS 1.438 1.204 2.062 1.875 1.688 1.875-16N .519 2.135 .805 36 10-113196-36 10-74936-( ) 2.000-18NS 1.678 1.266 2.250 2.125 1.750 2.0625-16N .738 2.260 .805 40 10-113196-40 10-74940-( ) 2.2500-16UN 1.914 1.266 2.500 2.375 1.750 2.3125-16N .738 2.510 .805 *For complete order number see page 5. Clamp 10-749XX-( ) has a bright cadmium finish. An olive drab cadmium plate finish is available by order number 71-749XX-( ). To complete clamp order number, add connector insert arrangement number. B DIA C .135 +.030 -.025 A DIA 45 SEALING PLUG MS27488-XX 10-405996-XX Color Code B .005 C .010 A Dia. .010 Order No. Contact Size MS Number Wire Size 10-405996-16 16 27488-16 20-16 Blue .133 .564* .083 10-405996-12 12 27488-12 14-12 Yellow .171 .564* .121 10-405996-8 8 27488-8 10-8 White .315 .470 .185 10-405996-4 4 27488-4 4-6 Blue .415 .470 .310 10-405996-0 0 27488-0 0-2 Yellow .605 1.000 .440 *.020 Sealing plugs are used to fill unused holes in multi-holed grommet configurations 54 QWL - accessories adapter, cable clamp 10-113138-XX adapter L C D V LEFT HAND F E A B M85049/2-( )C cable clamp M Y K 55 A QWL - accessories adapter, cable clamp, sleeve Shell Size 12 14 16 18 Adapter Part Number* Clamp MS Part Number* A Thread Class 2A (Plated) B Min Full Thd C Dia +.000 -.010 D .020 E Dia +.010 -.020 F .010 10-113138-12 M85049/2-4C .625-24UNEF 10-113138-13 M85049/2-4C .625-24NEF .422 .386 1.078 .750 .688 .422 .386 1.125 .750 .688 10-113138-14 M85049/2-6C 10-113138-15 M85049/2-6C .750-20UNEF .422 .500 1.078 .875 .812 .750-20UNEF .422 .500 1.125 .875 .812 10-113138-16 10-113138-17 M85049/2-8C .875-20UNEF .422 .625 1.078 1.000 .938 M85049/2-8C .875-20UNEF .422 .625 1.125 1.000 .938 10-113138-18 M85049/2-10C 1.000-20UNEF .422 .752 1.125 1.188 1.062 K Dia Cable Range Free Closed .302 .094 .428 .230 .515 .316 .614 .378 L Max V Thread Class 2B-LH M Max 1.390 1.609 1.390 1.609 1.390 1.609 1.609 1.375 1.375 1.375 1.437 .625-24NEF .625-24NEF .750-20UNEF .750-20UNEF .875-20UNEF .875-20UNEF 1.000-20UNEF Y Max .906 1.031 1.125 1.234 20 10-113138-20 M85049/2-12C 1.1875-18UNEF .422 .891 1.125 1.312 1.250 .738 .445 1.609 1.437 1.125-18NEF 1.484 22 10-113138-22 M85049/2-12C 1.1875-18NEF .422 .891 1.125 1.438 1.250 .738 .445 1.609 1.437 1.250-18NEF 1.484 24 10-113138-24 M85049/2-16C 1.4375-18UNEF .422 1.111 1.125 1.562 1.500 .926 .611 1.609 1.562 1.375-18NEF 1.671 28 10-113138-28 M85049/2-16C 1.4375-18NEF .422 1.111 1.297 1.812 1.500 .926 .611 1.781 1.562 1.625-18NEF 1.671 32 10-113138-32 M85049/2-20C 1.750-18UNS .484 1.422 1.297 2.062 1.875 1.200 .922 1.781 1.812 1.875-16UN 2.188 36 10-113138-36 M85049/2-24C 2.000-18UNS .562 1.672 1.297 2.250 2.125 1.363 .922 1.781 2.062 2.0625-16N 2.344 40 10-113138-40 M85049/2-28C 2.250-16UN .562 1.914 1.297 2.500 2.375 1.611 1.180 1.781 2.062 2.3125-16N 2.594 44 10-113138-44 M85049/2-32C 2.500-16UN .562 2.142 1.297 2.812 2.625 1.865 1.427 1.781 2.188 2.625-16UN 2.812 MS3420-( sleeve )A 2.000 .031 Z Dia Shell Size Sleeve MS Part Number D Dia. .016 Free .016 Closed 12 MS3420-4A .302 .219 .010 14 MS3420-4A MS3420-6A .302 .427 .219 .312 .020 .114 16 MS3420-6A MS3420-8A .427 .531 .312 .438 .085 .220 18 MS3420-6A MS3420-10A .427 .615 .312 .438 .085 .200 20 MS3420-10A MS3420-12A .615 .740 .438 .541 .177 .270 22 MS3420-10A MS3420-12A .615 .740 .438 .541 .177 .270 24 MS3420-8A MS3420-12A MS3420-16A .531 .740 .927 .438 .541 .750 .186 .260 .433 26 MS3420-8A MS3420-12A MS3420-16A .531 .740 .927 .438 .541 .750 .186 .260 .433 32 MS3420-12A MS3420-16A MS3420-20A .740 .927 1.240 .541 .750 .938 .273 .442 .620 36 MS3420-16A MS3420-20A MS3420-24A .927 1.240 1.365 .750 .938 1.125 .358 .504 .682 40 MS3420-16A MS3420-20A MS3420-28A .927 1.240 1.614 .750 .938 1.250 .368 .514 .816 44 MS3420-20A MS3420-28A MS3420-32A 1.240 1.614 1.865 .938 1.250 1.625 .638 .897 1.229 Z D Sleeve not supplied as part of MS3057-( )C assembly. Order separately by part number shown. 56 QWL - accessories protection caps 10-101046-( ), 10-101531-( plug protective covers ) 10-101046 L E F C A 10-101531 B 10-101063-( ), 10-101048-( ) receptacle protective covers 10-101063 E L A D C 10-101048 B 57 QWL - accessories protection caps All dimensions for reference only. A Thread Class 2A B Dia +.010 -.000 C Approx. E Approx. F Flat .010 L Max. 10-101531-10 .6250-0.05P-0.1L-DS .125 3.000 3.375 .500 1.250 10-101531-12 .7500-0.1P-0.2L-DS .125 3.500 3.875 .625 1.438 10-101046-14 10-101531-14 .8750-0.1P-0.2L-DS .125 3.500 3.875 .750 1.438 16 10-101046-16 10-101531-16 1.0000-0.1P-0.2L-DS .140 3.500 3.875 .875 1.438 18 10-101046-18 10-101531-18 1.1250-0.1P-0.2L-DS .140 3.500 4.000 1.000 1.438 20 10-101046-20 10-101531-20 1.2500-0.1P-0.2L-DS .193 4.000 4.500 1.062 1.438 22 10-101046-22 10-101531-22 1.3750-0.1P-0.2L-DS .193 4.000 4.500 1.125 1.438 24 10-101046-24 10-101531-24 1.5000-0.1P-0.2L-DS .193 4.500 5.000 1.250 1.438 28 10-101046-28 10-101531-28 1.7500-0.1P-0.2L-DS .193 4.500 5.000 1.500 1.438 32 10-101046-32 10-101531-32 2.0000-0.1P-0.2L-DS .193 5.000 5.500 1.750 1.438 36 10-101046-36 10-101531-36 2.2500-0.1P-0.2L-DS .193 5.000 5.500 2.000 1.438 40 10-101046-40 10-101531-40 2.5000-0.1P-0.2L-DS .193 5.000 5.500 2.250 1.438 44 10-101046-44 10-101531-44 2.7500-0.1P-0.2L-DS .193 6.000 6.000 2.500 1.438 48 10-101046-48 10-101531-48 3.0000-0.1P-0.2L-DS .193 6.000 6.000 2.750 1.438 B Dia. +.010 -.000 C Approx. D Dia. Max. E Approx. L Max. Shell Size Without Eyelet End Part Number* With Eyelet End Part Number* 10 10-101046-10 12 10-101046-12 14 *For complete order number see page 5. All dimensions for reference only. Shell Size Without Eyelet End Part Number* With Eyelet End Part Number* A Thread Class 2B 10 10-101063-10 10-101048-10 .6250-0.05P-0.1L-DS .140 3.000 .844 3.375 .750 12 10-101063-12 10-101048-12 .7500-0.1P-0.2L-DS .140 3.500 .969 3.875 .750 14 10-101063-14 10-101048-14 .8750-0.1P-0.2L-DS .140 3.500 1.094 3.875 .750 16 10-101063-16 10-101048-16 1.0000-0.1P-0.2L-DS .140 3.500 1.219 3.875 .750 18 10-101063-18 10-101048-18 1.1250-0.1P-0.2L-DS .193 3.500 1.344 4.000 .969 20 10-101063-20 10-101048-20 1.2500-0.1P-0.2L-DS .193 4.000 1.469 4.500 .969 22 10-101063-22 10-101048-22 1.3750-0.1P-0.2L-DS .193 4.000 1.562 4.500 .969 24 10-101063-24 10-101048-24 1.5000-0.1P-0.2L-DS .193 4.500 1.688 5.000 .969 28 10-101063-28 10-101048-28 1.7500-0.1P-0.2L-DS .193 4.500 1.938 5.000 .969 32 10-101063-32 10-101048-32 2.0000-0.1P-0.2L-DS .193 5.000 2.219 5.500 .969 36 10-101063-36 10-101048-36 2.2500-0.1P-0.2L-DS .193 5.000 2.469 5.500 .969 40 10-101063-40 10-101048-40 2.5000-0.1P-0.2L-DS .193 5.000 2.719 5.500 .969 44 10-101063-44 10-101048-44 2.7500-0.1P-0.2L-DS .193 6.000 2.969 6.000 .969 48 10-101063-48 10-101048-48 3.0000-0.1P-0.2L-DS .193 6.000 3.219 6.000 .969 *For complete order number see page 5. 58 QWL - accessories flange gasket, grip banding clamp R (TP) .031 ,010 (10-36675) .031 .005 (10-40450) 10-36675-( ) 10-40450-( ) flange gaskets R (TP) S T 4 HOLES F All dimensions for reference only. Part Number* Part Number* Shell Size F Dia. +.016 -.000 10-36675-10 10-40450-10 10 .625 .719 1.000 .172 10-36675-12 10-40450-12 12 .750 .813 1.094 .172 10-36675-14 10-40450-14 14 .875 .906 1.188 .172 10-36675-16 10-40450-16 16 1.000 .969 1.281 .172 10-36675-18 10-40450-18 18 1.125 1.063 1.375 .203 10-36675-20 10-40450-20 20 1.250 1.156 1.500 .203 10-36675-22 10-40450-22 22 1.375 1.250 1.625 .203 10-36675-24 10-40450-24 24 1.500 1.375 1.750 .203 10-36675-28 10-40450-28 28 1.750 1.563 2.000 .203 10-36675-32 10-40450-32 32 2.000 1.750 2.250 .219 10-36675-36 10-40450-36 36 2.188 1.938 2.500 .219 10-36675-40 10-40450-40 40 2.438 2.188 2.750 .219 10-36675-44 10-40450-44 44 2.688 2.375 3.000 .219 10-36675-48 10-40450-48 48 2.938 2.625 3.250 .219 R .010 S +.016 -.000 T Dia. .010 *For complete order number see page 5. All dimensions for reference only. 10-183249-( ) grip banding clamp .375 REF. A A Dia. Part Number* Max. Min. 10-183249-10 1.125 .812 10-183249-11 1.312 .938 10-183249-12 1.500 1.125 10-183249-13 1.688 1.312 10-183249-14 1.875 1.500 10-183249-15 2.062 1.688 10-183249-16 2.250 1.875 10-183249-17 2.438 2.062 10-183249-18 2.625 2.250 10-183249-19 2.812 2.438 10-183249-20 3.000 2.625 *For complete order number see page 5. 59 QWL crimp contacts Machined from copper alloy and silver-plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. Crimp contacts are available for all MS insert arrangements and are identified with an Amphenol(R) proprietary number. MS/STANDARD CRIMP CONTACTS Part Number 10-40553 Pin/ Socket Pin 10-40552 or 10-597109-161 Socket 10-40557 16 Short 16 Pin 10-40556 or 10-597109-171 Socket 10-40561 Mating Wire Barrel End Size Size 16 Long 16 Pin 10-40560 or 10-597109-131 Socket Allowable Wire Size 16 18 20 22* 16 18 20 22* Test Required Wire Adapter Current** Amps Sleeve 10-74696-6 10-74696-6 12 12 13 10 7.5 5 Mechanical Spacing Nom. AC (RMS) 200 1/16 13 10 7.5 5 A 700 500 1/8 1/16 D 1250 900 3/16 1/8 E 1750 1250 1/4 3/16 23 B 2450 1750 5/16 1/4 C 4200 3000 1 5/16 Pin Socket 8 8 8 10* 10-74696-1 46 33 10-40564 10-40565 Pin Socket 4 4 4 6* 10-74696-2 80 60 10-40562 or 10-581806 10-40563 or 10-581808 Pin 0 0 2* Effective Creepage Distance Nom. DC 10-40792 10-40793 Socket Recommended Operating Voltage* at Sea Level 250 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. 17 0 MS Service Rating Inst. 12 14 TABLE I CONTACT ARRANGEMENT SERVICE RATING 150 10-74696-7 100 * When using wire adapter sleeve shown. ** Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer's hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. The 12S, 14S and 16S connectors require short contacts. TABLE II ALTITUDE VOLTAGE DERATING** CHART Nominal Distance MS Service Rating Airspace Standard Sea Level Conditions Creepage Minimum Flashover Voltage AC (RMS) Pressure Altitude 50,000 Feet Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Pressure Altitude 70,000 Feet Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Inst. 1/32 1/16 1400 1000 500 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 60 QWL solder contacts Machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. A heavy silver-plated finish is deposited on all MS style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. MS/STANDARD SOLDER CONTACTS* Part Number Pin/ Socket 10-40569 Pin 10-597107-161 Socket 10-40599 Pin 10-597107-171 Socket Wire Barrel Size Mating End Size 16 Short 16 16 Long 10-33646 Pin 10-597107-131 Socket 10-35531 Pin 10-35532 Socket 10-35529 Pin 10-35530 Socket Pin 10-35528 Test Current** Amps 13 10 7.5 5 16 18 20 22 12 14 23 17 8 8 8 10 46 33 4 4 4 6 80 60 0 0 0 1 2 150 125 100 Socket MS Service Rating 13 10 7.5 5 16 18 20 22 12 12 10-35527 16 Allowable Wire Size TABLE I CONTACT ARRANGEMENT SERVICE RATING Recommended Operating Voltage* at Sea Level DC AC (RMS) Effective Creepage Distance Nom. Mechanical Spacing Nom. Inst. 250 200 1/16 A 700 500 1/8 1/16 D 1250 900 3/16 1/8 E 1750 1250 1/4 3/16 B 2450 1750 5/16 1/4 C 4200 3000 1 5/16 * The values listed in Table I represent operating values which include a generous safety factor. It may be necessary for some applications to exceed the operating voltages listed here. If this is necessary, designers will find Table II useful for determining the degree to which the recommended values of Table I can be exceeded. * Solder Wells Filled ** Contact ratings as stated are test ratings only. The connector could not withstand full rated current through all contacts continuously. Please note that the electrical data given is not an establishment of electrical safety factors. This is left entirely in the designer's hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. The 12S, 14S and 16S connectors require short contacts. TABLE II ALTITUDE VOLTAGE DERATING** CHART Nominal Distance MS Service Rating Airspace Standard Sea Level Conditions Creepage Minimum Flashover Voltage AC (RMS) Pressure Altitude 50,000 Feet Test Voltage AC (RMS) Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Pressure Altitude 70,000 Feet Minimum Flashover Voltage AC (RMS) Test Voltage AC (RMS) Inst. 1/32 1/16 1400 1000 500 400 325 260 A 1/16 1/8 2800 2000 800 600 450 360 D 1/8 3/16 3600 2800 900 675 500 400 E 3/16 1/4 4500 3500 1000 750 550 440 B 1/4 5/16 5700 4500 1100 825 600 480 C 5/16 1 8500 7000 1300 975 700 560 Not corrected for changes in density due to variations in temperature. ** No attempt has been made to recommend operating voltages. The designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc. 61 QWL application tools (crimp type) Complete installation instructions (L-516) for Amphenol(R) QWL Series Connectors are available on request. The following data includes information pertaining to the application tools which have been established for crimping, inserting and removing crimp contacts used in QWL Series Connectors. Contact Crimping, Insertion & Removal Tools Crimping Tool Positioner/ Turret Contact Size Contact Style Insertion Tool Removal Tool M22520/1-01 * 16 Pin & Socket 11-7345 11-8250 Kit M22520/1-01 * 12 Pin & Socket 11-7082 11-8250 Kit * * 8 Pin & Socket 11-8220 11-8250 Kit * * 4 Pin & Socket 11-7365-4 Pin11-7370-4 Socket 11-7674-2 * * 0 Pin & Socket 11-7365-5 Pin 11-7370-5 Socket 11-7674-3 *Refer to tool manufacturers for appropriate crimp tools or positioner/turret. Tools used with Arbor press 11-7364. 62 QWL thermocouple contacts Available from Amphenol is a complete line of cylindrical connectors featuring thermocouple contact insert arrangements. The design of these contacts is such that standard shell components and resilient inserts are used in the assemblies. Thermocouple contacts are available in all arrangements which contain size 12 and 16 pins and sockets, and feature probeproof, closed entry design for the socket contacts. MSapproved and other commercial arrangements may be ordered with thermocouple contacts substituted for the standard contacts. All thermocouple contact layouts may contain either iron, alumel, chromel, constantan, standard (copper) or brass (dummy) contacts. The resulting assembly will be identified with an Amphenol(R) part number. IDENTIFICATION For the purpose of wiring identification, thermocouple contacts are marked in accordance with the following color code which agrees with the wire code. Chromel. . . . . . . White Alumel . . . . . . . Green Iron . . . . . . . . Black Constantan . . . . . Yellow This identification is made by means of small dots of stain on solder well end of the contact and is in accordance with the listing shown above. WIRE WELL DATA Contact Size Well Inside Diameter Well Depth 12 16 +.004 -.002 .125 .094 +.031 -.000 .250 .188 Solder Well Barrel .166.003 .125 +.002 -.004 Outside Diameter RECOMMENDED WIRE: I Chromel - Alumel: Use wire in accordance with AN-W-29 II Iron - Constantan: Use wire in accordance with AN-W-8b 63 QWL thermocouple arrangements drawings to prevent cross plugging. Available thermocouple arrangements are tabulated on the following pages. Please contact your local sales office or Sidney, NY for additional information regarding thermocouple arrangements particular to your application. Military connector specifications do not provide for thermocouple contact usage in established MS inserts. Amphenol(R) has established a series of insert arrangements containing thermocouple contacts. Some inserts have been rotated into positions outside those covered by MS The following abbreviations are used in the contact material column: Abbreviation Ir. Con. Cu. Ch. Al. Dummy Material Iron Constantan Copper Chromel Alumel Brass Shell Size and Arrg. Similar To MS Arrg. Total Contacts 12S-51 12S-3 12S-54 12S-3 12S-55 12S-3 Contact Size 16 Pin Insert Rotation C/W 2 2 315 2 2 315 A = Ir.; B = Con. 2 2 45 A = Cu.; B = Con. 12 Contact Material A = Ch.; B = Al. 12S-56 12S-3 2 2 None A = Al.; B = Ch. 12S-57 12S-3 2 2 60 A = Ch.; B = Al. 12S-58 12S-3 2 2 120 A = Ir.; B = Con. 12S-59 12S-3 2 2 None A = Ir.; B = Con. 12S-60 12S-3 2 2 None A = Cu.; B = Con. 12S-61 12S-3 2 2 None A = Ch.; B = Con. 12S-62 12S-3 2 2 None A = Ch.; B = Al. 12S-64 12S-3 2 2 315 A = Cu.; B = Con. 12S-65 12S-3 2 2 None A = Con.; B = Ir. 14S-51 14S-9 2 2 90 A = Al.; B = Ch. 14S-52 14S-2 4 4 45 A, B = Cu.; C = Al.; D = Ch. 14S-53 14S-9 2 2 90 A = Ir.; B = Con. 14S-54 14S-6 6 6 45 A, C, E = Ir.; B, D, F = Con. 14S-55 14S-2 4 4 45 A, C = Ir.; B, D = Con. 14S-56 14S-2 4 4 45 A = Ir.; B = Con.; C, D = Cu. 14S-57 14S-2 4 4 45 A, C = Al.; B, D = Ch. 14S-58 14S-7 3 3 45 A = Al.;B = Ch.;C = Cu. 14S-59 14S-9 2 2 90 A = Cu.; B = Con. 14S-60 14S-9 2 2 * 14S-61 14S-6 6 6 45 A = Al.; B = Ch. 14S-63 14S-6 6 6 * A, C = Al.; B, D = Ch.; E = Ir.; F = Con. 14S-64 14S-2 4 4 * A, C = Con.; B, D = Cu. 14S-65 14S-6 6 6 * A, C, E = Cu.; B, D, F = Con. 14S-67 14S-6 6 6 * A = Al.; B = Ch.; Bal = Cu. 14S-68 14S-2 4 4 45 14S-69 14S-7 3 3 * A = Con.; B = Ch.; C = Cu. 14S-70 14S-2 4 4 * A, D = Ch.; B, C = Al. 14S-71 14S-2 4 4 * A, B, D = Cu.; C = Con. 14S-72 14S-9 2 2 * A = Con.; B = Cu. 14S-73 14S-2 4 4 * A, B = Cu.; C = Al.; D = Ch. A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu. A = Ch.; B = Con.; C, D = Cu. Insert arrangements including the letter "S" are available in QWL Series Connectors only.*No rotation required. 64 QWL thermocouple arrangements (Cont'd.) Contact Size 16 Pin Insert Rotation C/W 4 4 * A, B = Ch.; C, D = Al. 4 4 * A, B = Cu.; C, D = Con. 14S-2 4 4 * A, C = Al.; B, D = Ch. 14S-77 14S-2 4 4 * A, D = Al.; B, C = Ch. 14S-78 14S-9 2 2 * A = Ch.; B = Al. Shell Size and Arrg. Similar To MS Arrg. Total Contacts 14S-74 14S-2 14S-75 14S-2 14S-76 12 Contact Material 14S-79 14S-5 5 5 * A, B, E = Cu.; C = Al.; D = Ch. 14S-80 14S-9 2 2 * A = Cu.; B = Con. 14S-81 14S-9 2 2 * A = Al.; B = Cu. 14S-82 14S-2 4 4 * A = Ir.; B = Con.; C = Ch.; D = Al. 14S-83 14S-6 6 6 * A, C = Ir.; B, D = Con.; E, F = Cu. 14S-84 14S-6 6 6 * A, B = Al.; Bal = Cu. 14S-85 14S-7 3 3 * A = Ch.; B = Al.; C = Cu. 14S-86 14S-6 6 6 * A, F = Ir.; B, E = Con.; C, D = Cu. 14S-87 14S-6 6 6 * 14S-88 14S-9 2 2 90 A, B, C, D = Ir.; E, F = Con. A = Ch.; B = Con. 14S-89 14S-7 3 3 * A = Ir.; B = Cu., C = Con. 14S-90 14S-6 6 6 * A = Al.; C = Ch.; Bal. = Cu. 14S-91 14S-2 4 4 * A = Al.; B = Ch.; Bal. = Cu. 14S-93 14S-6 6 6 * A, B, F = Al.; D, C, E = Ch. 14-59 14-53 6 6 * A = Al.; B = Ch.; C = Ir.; D = Con.; E, F = Cu. 16S-52 16S-4 2 2 * A = Ch.; B = Al. 16S-54 16S-1 7 7 * A = Al.; B = Ch.; Bal. = Cu. A = Con.; Bal. = Cu. 16S-55 16S-1 7 7 * 16S-56 16S-1 7 7 * A = Al.; D = Ch.; Bal. = Cu. 16S-57 16S-1 7 7 * A, B = Al.; C, D = Ch.; Bal. = Cu. 16S-58 16S-1 7 7 * A, G = Al.; Bal. = Ch. 16S-59 16S-1 7 7 * A, C = Ir.; B, D = Con.; Bal. = Cu. 16S-60 16S-1 7 7 * A = Ir.; B = Con.; Bal. = Cu. 16S-61 16S-1 7 16-52 16-11 2 7 2 * 90 2 G = Al.; Bal. = Ch. A = Al.; B = Ch. 16-53 16-9 4 2 70 A = Al.; C = Ch.; B, D = Cu. 16-55 16-10 3 3 45 A = Al.; B = Ch.; C = Cu. 16-56 16-13 2 2 90 A = Con.; B = Cu. 16-57 16-10 3 3 * A = Al.; B = Cu.; C = Ch. 16-58 16-10 3 3 * A = Con.; B, C = Cu. 16-60 16-13 2 2 * A = Al.; B = Ch. 16-62 16-11 2 2 * A = Con.; B = Cu. 16-67 16-11 2 2 * A = Al.; B = Ch.; 16-68 16-9 4 2 18-51 18-12 6 18-52 18-11 5 18-53 18-12 6 18-54 18-15 4 18-56 18-1 10 10 45 A, C, E, G, I = Ir.; B, D, F, H, J = Con. 18-57 18-12 6 6 45 A, C, E = Al.; B, D, F = Ch. 18-59 18-12 6 6 45 A, C = Ir.; B, E, F = Con.; D = Cu. 2 * A, B, C = Ch.; D = Al. 6 * A = Ir.; B, E = Con.; D = Cu.; C, F = Dummy * A = Ir.; B = Con.; C = Ch.; D = Al.; E = Dummy * A, D = Ir.; B, E = Con.; C, F = Dummy 5 6 4 * A, C = Al.; B, D = Ch. Insert arrangements including the letter "S" are available in QWL Series Connectors only. 65 *No rotation required. QWL thermocouple arrangements (Cont'd.) Shell Size and Arrg. Similar To MS Arrg. Contact Size Total Contacts 12 5 16 Pin Insert Rotation C/W 45 Contact Material 18-60 18-11 5 18-61 18-12 6 6 * A, C = Ir.; B, D = Con.; E = Ch.; F = Al. 18-62 18-12 6 6 * A, B, C = Ir.; D, E, F = Con. 18-63 18-15 4 * A, C = Con.; B, D = Cu. 18-65 18-12 6 6 * A = Ir.; B = Con.; Bal. = Cu. 18-66 18-1 10 10 * A, C, E, G, I = Cu.; B, D, F, H, J = Con. 18-67 18-12 6 6 * A, C, E = Cu.; B, D, F = Con. 18-68 18-11 5 18-69 18-1 10 18-70 18-11 5 18-71 18-15 4 18-72 18-15 18-73 18-74 4 5 A, D = Al.; B, C = Ch.; E = Al. * A, D = Al.; B, C = Ch.; E = Cu. * A = Al.; B = Ch.; Bal. = Cu. 5 * A = Ir.; B = Con.; C = Ch.; D = Al.; E = Cu. 4 * A = Con.; Bal. = Cu. 4 4 * D = Con.; Bal. = Cu. 18-9 7 2 5 * A = Al.; D = Ch.; Bal. = Cu. 18-12 6 6 * A = Ch.; B = Al., D = Ir.; E = Cu.; C, F = Con. 18-76 18-1 10 10 * A, C, E, G, I = Al.; B, D, F, H, J = Ch. 18-77 18-1 10 10 * A, C, E, G = Al.; B, D, F, H = Ch.; Bal. = Cu. 18-78 18-1 10 10 * A = Al.; B = Ch.; D, F, H, J = Con.; Bal. = Cu. 18-79 18-12 6 6 * A, F = Ir.; B, E = Con.; C, D = Cu. 18-80 18-15 4 18-81 18-1 10 18-82 18-1 10 20-52 20-4 4 20-56 20-7 8 20-60 20-7 8 8 45 D = Ch.; E = Al.; Bal. = Cu. 20-61 20-29 17 17 45 A, B, M = Cu.; Bal. = Con. 20-62 20-15 7 80 A, C, E = Al.; B, D, F = Ch.; G = Cu. 20-64 20-27 14 14 * 20-65 20-27 14 14 * A, B, C, D, E, F, G = Ir.; H, I, J, K, L, M, N = Con. 20-67 20-16 9 7 * H = Al.; I = Ch.; Bal. = Cu. 20-68 20-7 8 8 * A, B, G, H = Con.; C, D, E, F = Cu. 20-69 20-27 14 14 * A, B, C, D, E, F, G = Cu.; H, I, J, K, L, M, N = Con. 20-70 20-29 17 17 * A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S = Con. 20-71 20-29 17 17 * S = Al.; R = Ch.; Bal. = Cu. 20-74 20-29 17 17 * A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T = Cu. 20-75 20-15 7 7 20-77 20-16 9 2 20-80 20-27 20-81 20-27 20-82 20-85 10 4 10 10 4 8 7 2 * A, C = Cu.; B, D = Con. * E, G = Con.; Bal. = Cu. * E, G = Con.; F, H = Ir.; Bal. = Cu. 315 A = Ir.; B = Con.; C = Ch.; D = Al. 45 A, B, G, H = Ir.; C, D, E, F = Con. A = Al.; C = Ch.; Bal. = Cu. * G = Al.; Bal = Ch. 7 * A = Con.; Bal. = Std. 14 14 * A, C, E, G, I, K, M = Cu.; B, D, F, H, J, L, N = Con. 14 14 * A, C, E, G, I, K, M = Ch.; B, D, F, H, J, L, N = Al. 20-29 17 17 * A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; T = Cu. 20-33 11 11 * K, L = Al.; Bal. = Ch. 20-87 20-29 17 17 * A, C, E, G, J, L, N, R = Con.; Bal. = Cu. 20-88 20-27 14 14 * A, C, E = Al.; B, D, F = Ch.; G, H, K, N = Con.; Bal. = Cu. 20-89 20-27 14 14 * B, D, F, H, J, L = Al.; A, C, E, G, I, K = Ch.; M, N = Cu. 20-90 20-27 14 14 * C, G, I = Ch.; K, L, M = Al.; Bal. = Cu. 20-91 20-27 14 14 * I = Ch.; K = Al.; Bal. = Cu. *No rotation required. 66 QWL thermocouple arrangements (Cont'd.) Shell Size and Arrg. Similar To MS Arrg. Total Contacts Contact Size 12 16 Pin Insert Rotation C/W Contact Material 20-92 20-7 8 8 * A = Al.; H = Cu.; Bal. = Ch. 20-93 20-27 14 14 * A = Ch.; B = Al.; Bal. = Cu. 20-94 20-15 7 * A, C, E = Al.; B, D, F = Ch.; G = Cu. 20-99 20-33 11 11 * A = Al.; Bal. = Ch. 7 22-57 22-14 19 19 45 A, C, E, G, J, L, N, R = Ir.; B, D, F, H, K, M, P, S = Con.; T, U, V = Cu. 22-60 22-14 19 19 45 U = Al.; N = Ch.; Bal. = Cu. 22-62 22-23 8 60 A, B, F, G = Al.; C, D, E, H = Ch. 22-68 22-19 14 14 45 A, C, E, G, J, L, M = Ir.; B, D, F, H, K, P, N = Con. 22-69 22-19 14 14 45 22-71 22-14 19 19 * V = Al., U = Ch.; Bal. = Cu. 22-72 22-5 6 2 4 * B = Al.; E = Ch.; Bal. = Cu. 22-73 22-5 6 2 4 * E = Al.; B = Ch.; Bal. = Cu. 22-74 22-23 8 8 * A, C, E, G = Ir.; B, D, F, H = Con. 22-75 22-23 8 8 * A = Al.; B, D, G, H = Cu.; C = Ch.; E = Ir.; F = Con. 21 21 * W = Con.; Bal. = Cu. 22-77 22-19 14 14 * B, D, F, H, J, K, M, P = Cu.; A, E, L = Ir.; C, G, N = Con. 22-78 22-14 19 19 * A, C, E, G, H, K, M, P, R, T = Con.; Bal. = Cu. 22-76 8 A, C, E, G, J, L, M = Cu.; B, D, F, H, K, P, N = Con. 22-79 22-10 4 4 * A, C = Con.; B, D = Cu. 22-82 22-14 19 19 * A, C, E, G, J, L, N, R, T = Ir.; B, D, F, H, K, M, P, S, U = Con.; V = Cu. 22-83 22-18 8 8 * A, C, E, G = Al.; B, D, F, H = Ch. 22-84 22-14 19 19 * A, C, S = Ch.; B, D, T = Al.; Bal. = Cu. 22-85 22-19 14 14 * A, C, E, G, J, L, N = Al.; B, D, F, H, K, M, P = Ch. 22-89 22-28 7 7 24-56 24-20 11 2 24-57 24-28 24-62 24-28 24-63 * A, C, E = Ir.; B, D, F = Con.; G = Cu. 9 45 E = Al.; F = Ch.; Bal. = Cu. 24 24 45 A, C, J, V, Y, W, K, E, H, U, S, M = Ch.; Bal. = Al. 24 24 * 24-28 24 24 * A, C, E, G, J, L, K, N, S, U, W, Y = Cu.; B, D, F, H, Q, R, M, P, T, V, X, Z = Con. 24-64 24-5 16 16 * A, B, C, D, E, F, G, H = Ir.; J, K, L, M, N, P, R, S = Con. 24-68 24-28 24 24 * D = Con.; Bal. = Cu. 24-81 24-7 16 14 * A, C, E, G, I, K, M, N, P = Cu.; B, D, F, H, J, L, O = Con. 24-88 24-28 24 24 * A, B, C, D, E, F, G, H, J, K, L, M = Con.; Bal. = Ir. 24-91 24-5 16 16 * A, B, C, D, E, F, G, H = Al.; J, K, L, M, N, P, R, S = Ch. 2 A, C, E, G = Ir.; B, D, F, H = Con.; R, T = Ch.; S, U = Al.; Bal. = Cu. 28-53 28-11 22 4 18 45 J, L = Al.; K, M = Ch.; Bal. = Cu. 28-58 28-20 14 10 4 45 A, C, E, G, K, M = Al.; B, D, F, H, L, N = Ch.; J, P = Cu. 28-61 28-21 37 28-63 28-20 14 37 45 A, C, J, Z, m, r, n, a, K, F, H, X, k, h, T, M, N, d = Ir.; Bal. = Con. 4 45 A, C, E, G, J = Al.; B, D, F, H, P = Ch.; Bal. = Cu. 28-64 28-15 35 35 * A, d = Al.; B, j = Ch.; C, D, E, F, G, N, P, R, S, H, J, K, L, M, W, X, Y, Z = Con.; Bal. = Cu. 28-65 28-12 26 26 * A, C, E, G, J, L, N, R, T, V = Ir.; X, Z = Al.; B, D, F, H, K, M, P, S, U, W, = Con.; Y, a = Ch.; b, d = Cu. 28-67 28-16 20 20 * 28-68 28-15 35 35 45 28-69 28-11 22 4 18 * G = Al.; R = Ch.; Bal. = Cu. 28-70 28-11 22 4 18 * A = Al.; B = Ch.; Bal. = Cu. 28-77 28-11 22 4 18 * J = Con.; Bal. = Cu. 10 U = Con.; Bal. = Cu. T = Al.; U = Ch.; Bal. = Cu. 67 QWL thermocouple arrangements (Cont'd.) Shell Size and Arrg. Similar To MS Arrg. Total Contacts Contact Size 12 16 Pin Insert Rotation C/W 37 * Contact Material A, D, S, Z, n, s = Ir.; B, J, K, f, g, r, = Con.; G, L, P, b, e, j = Al.; F, H, T, X, h, k = Ch.; Bal. = Cu. 28-81 28-21 37 28-85 28-11 22 4 18 45 28-91 28-9 12 6 6 * 28-94 28-12 26 26 * B, D, F, H, K, M, P, S, U, W, Y, a, d = Al.; Bal. = Ch. 28-98 28-21 37 37 * M = Al.; F = Ch.; Bal. = Cu. 28-99 28-12 26 26 * B, D, F, H, K, M, P, S, U, W, Y, a = Con.; Bal. = Cu. 28-AC 28-16 20 20 * 28-AD 28-21 37 37 45 28-AE 28-21 37 37 * 28-AF 28-18 12 12 * A, C, E, G, J, L = Ch.; Bal. = Al. 28-AG 28-12 26 26 * A, C, E, G, J, L, N, R = Al.; B, D, F, H, K, M, P, S = Ch.; Bal. = Cu. K, M = Al.; J, L = Ch.; Bal. = Cu. M = Ir.; L = Con.; Bal. = Cu. A, C, E, G, J, L = Ir.; B, D, F, N, K, M = Con.; Bal. = Cu. A, C, F, H, J, K, M, N, T, X, Z, a, d, h, k, m, n, r = Cu.; Bal. = Con. A, C, E, G, J, L, N, R, T, V, X, a, c, e, g, j, m, p, s = Cu.; Bal. = Con. 28-AK 28-21 37 37 * 32-51 32-8 30 6 24 90 M = Ch.; N = Al.; Bal. = Cu. 32-55 32-8 30 6 24 125 M, N, = Ch.; O, P = Al.; Bal. = Cu. 32-91 32-64 54 54 * 36-53 36-7 47 40 45 36-56 36-10 48 48 * A, C, E, G, L, J, H, P, R, T, V, X, Z, b, d, f, h, k, q, n, m, u, w, y = Con.; Bal. = Cu. 36-57 36-8 47 46 * W = Al.; f = Ch.; Bal. = Cu. 36-58 36-15 35 35 * H = Al.; G = Ch.; Bal. = Cu. 36-61 36-15 35 35 * A, C, E, J, K, L, M, N, P, R, T, V, f, X, Y, h, j, c = Con.; Bal. = Cu. 7 1 A, B, C, D, J, K, L, M, N, P, X, a, b, c, d, e, m, p = Ch.; n = Cu.; Bal. = Al. A, C, E, G, J, L, N, P, S, U, W, Y, a, c, e, g, j, m = Ir.; B, D, F, H, K, M, O, R, T, V, X, Z, b, d, f, h, k, n = Con.; Bal. = Cu. u, v, w = Al.; x, y, z = Ch.; Bal. = Cu. 36-62 36-10 48 48 * A, C, E = Al.; B, D, F = Ch.; Bal. = Cu. 36-82 36-52 52 52 * v, g = Ir.; p, y, c = Con.; x = Ch.; Bal. = Cu. 36-86 36-10 48 48 * A, C, E, G, J, L, N, P, R, T, V, X = Al.; B, D, F, H, K, M, O, Q, S, U, W, Y = Ch.; z, b, d, f, h, k, n, q, s, u, w, y = Con.; a, c, e, g, j, m, p, r, t, v, x, z = Cu. 36-88 36-52 52 52 * A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF = Cu.; Bal. = Con. 40-58 40-56 85 85 * A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN, AP, AS, AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ir.; Bal. = Con. 40-59 40-56 85 85 * B = Ch.; C = Con.; Bal. = Cu. 40-77 40-53 60 60 * 55, 60 = Ir.; 57, 58, 59 = Con.; 56 = Ch.; Bal. = Cu. 40-78 40-53 60 60 * 50, 51 = Ir.; 27, 28, 29, 31, 32, 34, 36, 37, = Con.; 25, 39, 40, 41 = Al.; 43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = Ch.; Bal. = Cu. 40-88 40-53 60 60 * 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = Con.; Bal. = Cu. * A, C, E, H, K, M, P, S, U, W, Y, a, c, f, h, j, m, p, r, t, v, x, z, AB, AD, AF, AJ, AL, AN, AR, AT = Cu.; B, D, F, J, L, N, R, T, V, X, Z, b, d, g, i, k, n, q, s, u, w, y, AA, AC, AE, AH, AK, AM, AP, AS = Con.; AU, AW, AY, BA, BC, BE, BH, BK, BM, BP, BS, BU = Ch.; AV, AX, AZ, BB, BD, BF, BJ, BL, BN, BR, BT, BV = Al. 40-AA 40-56 85 85 44-57 44-52 104 104 * A, C, E, G, J, L, etc. = Cu.; B, D, F, H, K, M, etc. = Con. 44-59 44-52 104 104 * 34 = Con.; 70 = Cu. 44-60 44-52 104 104 * A, C, E, etc. = Ch., (52); B, D, F, etc. = Al. (52) * BY, BZ, CA, CB, CC, CD, CE, CR = Al.; CH, CJ, CK, CL, CM, CN, CP CS = Ch.; Bal. = Cu. 44-62 44-52 104 104 Amphenol(R) arrangement*No rotation required. 68 Other Heavy Duty Cylindrical Connectors Offered by Amphenol Class "L" MIL-C-22992, QWLD and Star-Line Amphenol meets the demands for heavy duty connectors by providing three additional cylindrical connector series, each with unique design characteristics for reliable operation in specific industrial environments. Class "L", MIL-C-22992 - for the heaviest electrical loads; for military and industrial applications. * MIL-C-22992 qualification. * Current range from 40 to 200 amperes. * Direct current or single/three phase, 60/400 Hertz alternating current. * Rugged shells are resistant to vibration, high impact, shock and corrosion * Double stub threads per MIL-STD-1373 for fast coupling and easy cleaning. * Five key polarization system assures that circuits with incompatible power characteristics (voltage, phase and frequency) are not mated. * Crimp termination. Contacts can be soldered. * Automatic grounding for safety. * Unique arc quenching capability provides a positive safety feature if connectors are inadvertently disconnected under load. * 4 shell styles with 7 insert patterns that facilitate large conductors. * Grommets and seals provide waterproofing. QWLD - for most power and control circuits * Military (MIL-C-22992) qualified connectors and industrial equivalents available. * Increased shell size for greater durability than similar standard connectors. * Crimp or solder termination. * Double stub threaded per MIL-STD-1373. * 7 shell styles with over 300 insert patterns (MIL-C-5015 inserts plus specials) * Class C is pressurized; Class R is environmental. Heavy Duty Class "L" Connectors QWLD Series Star-line(R) Series - heavy duty environmentally sealed plugs and receptacles that are used in all types of industrial and aerospace applications. * Equals or exceeds MIL-C-5015 E and R specifications. * UL listed and CSA listed circuit breaking capability. * Up to high amperage of 1135 amps at 1000VAC or DC rating available. * Solder, crimp and pressure terminals. Circuit breaking power and control types. * Double lead Acme threads provide complete coupling in one turn of the coupling nut, and do not clog under adverse weather conditions. * IP67 rating for environmental sealing. * Hard anodic coating provides dielectric strength with heat and corrosion resistance. Star-Line Series Star-line EX(R) Series - Hybrid form of the Star-Line series with higher temperature ranges. Cenelec Certified for use in Zone 1-IIc hazardous environments. EX Certificate #03ATEX 1101X. For further information on these additional heavy duty cylindri69 cal connectors, refer to the following: Catalog 12-052 for Class "L", MIL-C-22992 Connectors Catalog 12-052 for QWLD Connectors Catalog 12-054 for Star-Line and Star-Line EX Connectors.