Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TG
– EE70 –
Capacitance (µF)
Rated Voltage Mark
Series identification
Mark for Lead-Free
Products Black Dot
(Square)Lot number
Negative polarity
marking (–) TG
100
A
A±0.2
W
()Reference size
L
φD±0.5
H
B±0.2
(I)
K
(P) (I)
+
–
0.3 max.
Pressure Relief (φ10 and larger)
Capacitance (µF)
Rated Voltage Mark
Series identification
Lot number
Negative polarity
marking (–)
1000
TGA
■Features
● Endurance:125 °C 1000 h to 2000 h
● Miniaturization (40 % less than TA Series)
● Low ESR (Low temp)
● Vibration-proof product is available upon request. (φ8 mm and larger)
● RoHS directive compliant (Parts No φ8 to φ
10 : EEE✽
, φ
12.5 to φ
18 : EEV✽)
Surface Mount Type
Series: TG Type: V
■Specifi cations
Category Temp. Range –40 °C to +125 °C
Rated W.V. Range 10 V.DC to 100 V.DC
Nominal Cap. Range 10 µF to 4700 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV After 2 minutes
tan δPlease see the attached standard products list
Characteristics
at Low Temperature
W.V. (V) 10 16 25 35 50 63 80 100
(Impedance ratio at 120 Hz)
Z(–25 °C)/Z(+20 °C) 32222222
Z(–40 °C)/Z(+20 °C) 64433333
Endurance
After applying rated working voltage for 1000 hours (φ8҂
6.2), 2000 hours (φ8҂
10.2 <) at +125 °C±2 °C and then
being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±30 % of initial measured value (code U : ±35 %)
tan δ< 300 % of initial specifi ed value (code U : ±350 %)
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Resistance to
Soldering Heat
After refl ow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits.
Capacitance change ±10 % of initial measured value
tan δ< initial specifi ed value
DC leakage current < initial specifi ed value
■Di men sions in mm (not to scale) ■Marking
Rated Voltage Mark
(mm)
Example : 10 V 100 µF, 10 V 1000 µF
Marking coloc : BLACK
Lead-Free products (< φ10)
Lead-Free products (> φ12.5)
A 10 V
C 16 V
E 25 V
V 35 V
Size
code DLA, B H I W P K
E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.35 - 0.20
F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.20
G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.20
H13 12.5 13.5±0.5 13.5 15.0 max. 4.7 0.90±0.3 4.4 0.70±0.30
J16 16.0 16.5±0.5 17.0 19.0 max. 5.5 1.20±0.3 6.7 0.70±0.30
K16 18.0 16.5±0.5 19.0 21.0 max. 6.7 1.20±0.3 6.7 0.70±0.30
+ 0.15
H 50 V
J 63 V
K 80 V
2A 100 V
Frequency (Hz)
120 1 k 10 k 100 k to
Correction factor 0.65 0.85 0.95 1.00
■Frequency correction factor for ripple current
Sep. 201103
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TG
– EE71 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(100 kHz)
(+125 °C)
ESR
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(액)(pcs)
10
100 8 6.2 E 100 1.00 0.30 EEETG1A101P (2) 1000
220 86.2(E)1001.000.30
EEETG1A221UP (2) 1000
810.2F 1970.500.30
EEETG1A221P (2) 500
330 810.2(F)1970.500.30
EEETG1A331UP (2) 500
10 10.2 G 270 0.30 0.30 EEETG1A331P (2) 500
470 10 10.2 (G) 270 0.300.30
EEETG1A471UP (2) 500
1000 12.5 13.5 H13 800 0.12 0.30 EEVTG1A102Q (3) 200
1500 12.5 13.5 (H13) 800 0.12 0.30 EEVTG1A152UQ (3) 200
2200 16 16.5 J16 1100 0.08 0.32 EEVTG1A222M (3) 125
3300 16 16.5 (J16) 1100 0.08 0.34 EEVTG1A332UM (3) 125
18 16.5 K16 1300 0.075 0.34 EEVTG1A332M (3) 125
4700 18 16.5 K16 1300 0.075 0.36 EEVTG1A472M (3) 125
16
100 8 10.2 F 197 0.50 0.23 EEETG1C101P (2) 500
220 810.2(F)1970.500.23
EEETG1C221UP (2) 500
10 10.2 G 270 0.30 0.23 EEETG1C221P (2) 500
330 10 10.2 (G) 270 0.30 0.23 EEETG1C331UP (2) 500
12.5 13.5 H13 800 0.12 0.23 EEVTG1C331Q (3) 200
470 12.5 13.5 H13 800 0.12 0.23 EEVTG1C471Q (3) 200
680 12.5 13.5 H13 800 0.12 0.23 EEVTG1C681Q (3) 200
1000 12.5 13.5 (H13) 800 0.12 0.23 EEVTG1C102UQ (3) 200
16 16.5 J16 1100 0.08 0.23 EEVTG1C102M (3) 125
2200 16 16.5 (J16) 1100 0.08 0.25 EEVTG1C222UM (3) 125
18 16.5 K16 1300 0.075 0.25 EEVTG1C222M (3) 125
3300 18 16.5 K16 1300 0.075 0.27 EEVTG1C332M (3) 125
25
47 8 6.2 E 100 1.00 0.18 EEETG1E470P (2) 1000
100 86.2(E)1001.000.18
EEETG1E101UP (2) 1000
810.2F 1970.500.18
EEETG1E101P (2) 500
220 810.2(F)1970.500.18
EEETG1E221UP (2) 500
10 10.2 G 270 0.30 0.18 EEETG1E221P (2) 500
330 10 10.2 (G) 270 0.30 0.18 EEETG1E331UP (2) 500
12.5 13.5 H13 800 0.12 0.18 EEVTG1E331Q (3) 200
470 12.5 13.5 H13 800 0.120.18
EEVTG1E471Q (3) 200
680 12.5 13.5 (H13) 800 0.12 0.18 EEVTG1E681UQ (3) 200
16 16.5 J16 1100 0.08 0.18 EEVTG1E681M (3) 125
1000 16 16.5 (J16) 1100 0.08 0.18 EEVTG1E102UM (3) 125
18 16.5 K16 1300 0.075 0.18 EEVTG1E102M (3) 125
2200 18 16.5 K16 1300 0.075 0.20 EEVTG1E222M (3) 125
35
33 8 6.2 E 100 1.00 0.16 EEETG1V330P (2) 1000
47 86.2(E)1001.000.16
EEETG1V470UP (2) 1000
810.2F 1970.500.16
EEETG1V470P (2) 500
100 810.2(F)1970.500.16
EEETG1V101UP (2) 500
10 10.2 G 270 0.30 0.16 EEETG1V101P (2) 500
220 10 10.2 (G) 270 0.30 0.16 EEETG1V221UP (2) 500
330 12.5 13.5 H13 800 0.12 0.16 EEVTG1V331Q (3) 200
35
470 12.5 13.5 (H13) 800 0.12 0.16 EEVTG1V471UQ (3) 200
16 16.5 J16 1100 0.08 0.16 EEVTG1V471M (3) 125
680 16 16.5 (J16) 1100 0.08 0.16 EEVTG1V681UM (3) 125
18 16.5 K16 1300 0.075 0.16 EEVTG1V681M (3) 125
1000 18 16.5 K16 1300 0.075 0.16 EEVTG1V102M (3) 125
✽Size code( ):Miniaturization product
The taping dimensions are explained on EE188 of our Catalog. Please use it as a ref er ence guide.
Refl ow Profi le(Fig-1 to Fig-11) listed on EE186 of our Catalog.
Endurance : 125 °C 1000 h (φ8҂10.2 < : 2000 h)
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TG
– EE72 –
■Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation
Part No.
(RoHS:compliant) Refl ow
Min.
Packaging Q'ty
Dia. Length ✽Size
Code
Ripple
Current
(100 kHz)
(+125 °C)
ESR
(100 kHz)
(+20 °C)
tan δ
(120 Hz)
(+20 °C)
Taping
(V) (µF) (mm) (mm)
(mA r.m.s.)
(액)(pcs)
50
10 8 6.2 E 80 1.60 0.14 EEETG1H100P (2) 1000
22 8 6.2 E 80 1.60 0.14 EEETG1H220P (2) 1000
33 86.2(E)801.600.14
EEETG1H330UP (2) 1000
810.2F 1330.750.14
EEETG1H330P (2) 500
47 810.2(F)1330.750.14
EEETG1H470UP (2) 500
10 10.2 G 221 0.50 0.14 EEETG1H470P (2) 500
100 10 10.2 (G) 221 0.50 0.14 EEETG1H101UP (2) 500
220 12.5 13.5 H13 600 0.23 0.14 EEVTG1H221Q (3) 200
330 12.5 13.5 H13 600 0.23 0.14 EEVTG1H331Q (3) 200
470 16 16.5 J16 900 0.150.14
EEVTG1H471M (3) 125
680 16 16.5 (J16) 900 0.15 0.14 EEVTG1H681UM (3) 125
18 16.5 K16 950 0.14 0.14 EEVTG1H681M (3) 125
1000 18 16.5 K16 950 0.14 0.14 EEVTG1H102M (3) 125
63
10 8 6.2 E 55 2.20 0.12 EEETG1J100P (2) 1000
22 8 10.2F 1001.000.12
EEETG1J220P (2) 500
33 810.2(F)1001.000.12
EEETG1J330UP (2) 500
10 10.2 G 150 0.80 0.12 EEETG1J330P (2) 500
47 810.2(F)1001.000.12
EEETG1J470UP (2) 500
10 10.2 G 150 0.80 0.12 EEETG1J470P (2) 500
100 10 10.2 (G) 150 0.80 0.12 EEETG1J101UP (2) 500
12.5 13.5 H13 350 0.26 0.12 EEVTG1J101Q (3) 200
220 12.5 13.5 H13 350 0.26 0.12 EEVTG1J221Q (3) 200
330 16 16.5 J16 500 0.180.12
EEVTG1J331M (3) 125
470 16 16.5 J16 500 0.180.12
EEVTG1J471M (3) 125
80
10 8 10.2F 701.300.12
EEETG1K100P (2) 500
22 810.2(F)701.30 0.12 EEETG1K220UP (2) 500
10 10.2 G 90 1.00 0.12 EEETG1K220P (2) 500
33 810.2(F)701.30 0.12 EEETG1K330UP (2) 500
10 10.2 G 90 1.00 0.12 EEETG1K330P (2) 500
47 10 10.2 (G) 90 1.00 0.12 EEETG1K470UP (2) 500
12.5 13.5 H13 250 0.42 0.12 EEVTG1K470Q (3) 200
100 12.5 13.5 (H13) 250 0.42 0.12 EEVTG1K101UQ (3) 200
16 16.5 J16 350 0.30 0.12 EEVTG1K101M (3) 125
220 16 16.5 (J16) 350 0.30 0.12 EEVTG1K221UM (3) 125
18 16.5 K16 400 0.28 0.12 EEVTG1K221M (3) 125
330 16 16.5 (J16) 350 0.30 0.12 EEVTG1K331UM (3) 125
18 16.5 K16 400 0.28 0.12 EEVTG1K331M (3) 125
470 18 16.5 K16 400 0.28 0.12 EEVTG1K471M (3) 125
100
10 8 10.2F 701.300.10
EEETG2A100P (2) 500
22 810.2(F)701.30 0.10 EEETG2A220UP (2) 500
10 10.2 G 90 1.00 0.10 EEETG2A220P (2) 500
33 10 10.2 G 90 1.00 0.10 EEETG2A330P (2) 500
47 12.5 13.5 H132500.42 0.10 EEVTG2A470Q (3) 200
100 16 16.5 J16 350 0.30 0.10 EEVTG2A101M (3) 125
220 18 16.5 K16 400 0.28 0.10 EEVTG2A221M (3) 125
330 18 16.5 K16 400 0.28 0.10 EEVTG2A331M (3) 125
✽Size code( ):Miniaturization product
The taping dimensions are explained on EE188 of our Catalog. Please use it as a ref er ence guide.
Refl ow Profi le(Fig-1 to Fig-11) listed on EE186 of our Catalog.
Endurance : 125 °C 1000 h (φ8҂10.2 < : 2000 h)
Sep. 201000
