DS21204 Rev. 13 - 2 1 of 3 2W005G - 2W10G
www.diodes.com ãDiodes Incorporated
2W005G - 2W10G
2.0A GLASS PASSIVATED BRIDGE RECTIFIER
Features
A
B
D
E
G
G
C
+
-
+
-
WOG
Dim Min Max
A8.84 9.86
B4.00 4.60
C27.90 ¾
D25.40 ¾
E0.71 0.81
G4.60 5.60
All Dimensions in mm
Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified
Mechanical Data
Single phase, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol 2W
005G
2W
01G
2W
02G
2W
04G
2W
06G
2W
08G
2W
10G Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @ TA= 25°CIO2.0 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load
per element (JEDEC Method)
IFSM 60 A
Forward Voltage (per element) @ IF= 2.0A VFM 1.1 V
Peak Reverse Current @ TA= 25°C
at Rated DC Blocking Voltage @ TA= 125°CIRM 5.0
500 mA
Typical Total Capacitance (Note 2) CT16 pF
Typical Thermal Resistance Junction to Case RqJC 40 °C/W
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Notes: 1. Thermal resistance from junction to case mounted on PC board with 13 x 13mm (0.03mm thick) land areas.
2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
3. EC Directive 2002/95/EC (RoHS) revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex
Notes 5 and 7.
·Glass Passivated Die Construction
·Diffused Junction
·Low Forward Voltage Drop, High Current Capability
·Surge Overload Rating to 60A Peak
·Ideal for Printed Circuit Boards
·Case to Terminal Isolation Voltage 1500V
·UL Listed Under Recognized Component
Index, File Number E94661
·Lead Free Finish, RoHS Compliant (Date Code 0514+)
(Note 3)
·Case: WOG
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish ¾Silver. Plated Leads Solderable per
MIL-STD-202, Method 208
·Polarity: As marked on Body
·Marking: Type Number
·Weight: 1.3 grams (approximate)
DS21204 Rev. 13 - 2 2 of 3 2W005G - 2W10G
www.diodes.com
0.01
0.1
1.0
10
0.2 0.6 1.0 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
.2 T
y
pical Forward Characteristics
F
0
10
20
30
40
50
110 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fi
g
. 3 Max Non-Repetitive Sur
g
e Current
60
Pulse Width 8.3 ms
Single Half-Sine-Wave
(JEDEC Method)
1
10
100
1 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fi
g
.4 T
y
pical Total Capacitance
R
T=25°C
f=1mz
j
0.01
0.1
1.0
10
100
200
0 40 80 160
PERCENT OF RATED PEAK REVERSE VOLTAGE (%
)
Fig. 5 Typical Reverse Characteristics
120
T = 100°C
j
T=25°C
j
0
0.5
1.0
1.5
0 25 50 100 125 15075
I , AVERAGE FORWARD CURRENT (A)
F
T , AMBIENT TEMPERATURE (°C)
Fi
g
. 1 Forward Current Deratin
g
Curve
A
2
.
0
Single phase half-sine-wave
60Hz resistive or inductive load
DS21204 Rev. 13 - 2 3 of 3 2W005G - 2W10G
www.diodes.com
Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.
Ordering Information (Note 4)
Device Packaging Shipping
2W005G WOG 1K Bulk
2W01G WOG 1K Bulk
2W02G WOG 1K Bulk
2W04G WOG 1K Bulk
2W06G WOG 1K Bulk
2W08G WOG 1K Bulk
2W10G WOG 1K Bulk
IMPORTANT NOTICE
LIFE SUPPORT
www.diodes.com
Diodes, Inc. and its subsidiaries reserve the right to make changes without further notice to any product herein to make corrections, modifications, enhance-
ments, improvements, or other changes. Diodes, Inc. does not assume any liability arising out of the application or use of any product described herein;
neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such
use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
The products located on our website at are not recommended for use in life support systems where a failure or malfunction of the
component may directly threaten life or cause injury without the expressed written approval of Diodes Incorporated.
