DATA SHEET GENERAL PURPOSE CHIP RESISTORS RC_L series 0.1%, 0.5%, 1%, 5% Sizes 0075/0100/0201/0402/0603/0805/ 1206/1210/1218/2010/2512 Product specification - December 12, 2018 V.10 RoHS compliant & Halogen free Product specification Chip Resistor Surface Mount SCOPE This specification describes RC series chip resistors with lead free terminations made by thick film process. RC_L SERIES 2 11 0075 to 2512 ORDERING INFORMATION - GLOBAL PART NUMBER Global part numbers are identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and resistance value. GLOBAL PART NUMBER RC XXXX X X X XX XXXX L APPLICATIONS All general purpose application (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0075/0100/0201/0402/0603/0805/1206/1210/1218/2010/2512 FEATURES Halogen Free Epoxy RoHS compliant Products with lead free terminations meet RoHS requirements Pb-glass contained in electrodes, resistors element and glass are exempted by RoHS Reducing environmentally hazardous wastes High component and equipment reliability Saving of PCB space None forbidden-materials used in products/production (2) TOLERANCE B = 0.1% D = 0.5% F = 1.0% J = 5.0% (for jumper ordering, use code of J) (3) TAPING REEL & POWER R = Paper taping reel K = Embossed taping reel S = ESD safe reel (0075/0100 only) (4) TEMPERATURE COEFFICIENT OF RESISTANCE = Based on spec. (5) TAPING REEL 07 = 7 inch dia. Reel 10=10 inch dia. Reel 13 =13 inch dia. Reel 7W = 7 inch dia. Reel & 2 x standard power 7N = 7 inch dia. Reel, ESD safe reel (0075/0100 only) 3W = 13 inch dia. Reel & 2 x standard power (6) RESISTANCE VALUE There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point Example: 97R6 = 97.6 9K76 = 9760 1M = 1,000,000 (7) DEFAULT CODE Letter L is the system default code for ordering only.(Note) ORDERING EXAMPLE The ordering code for a RC0402 0.0625W chip resistor value 100Kwith 5% tolerance, supplied in 7-inch tape reel of 10,000 units per reel is: RC0402JR-07100KL. NOTE 1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process". 2. On customized label, "LFP" or specific symbol can be printed. www.yageo.com Dec. 12, 2018 V.10 Product specification Chip Resistor Surface Mount RC_L SERIES 3 11 0075 to 2512 MARKING RC0075 / RC0100 / RC0201 / RC0402 No Marking Fig. 1 RC0603 0 1%, 0.5%,E24 exception values 10/11/13/15/20/75 of E24 series Fig. 2 240 = 24 x 100 = 24 88 1%, 0.5%, E96 refer to EIA-96 marking method, including values 10/11/13/15/20/75 of E24 series Fig. 3 88A = 806 x 100 = 806 03 5%, E24 series : 3 digits First two digits for significant figure and 3rd digit for number of zeros Fig. 4 Value = 10 K RC0805 / RC1206 / RC1210 / RC2010 / RC2512 00 1%, 0.5%, E24/E96 series : 4 digits First three digits for significant figure and 4th digit for numbe r of zeros Fig. 5 Value = 10 K 03 5%, E24 series : 3 digits First two digits for significant figure and 3rd digit for number of zeros Fig. 6 Value = 10 K RC1218 E-24 series: 3 digits, 5% First two digits for significant figure and 3rd digit for number of zeros Fig. 7 Value = 10 K 00 Both E-24 and E-96 series: 4 digits, 1% & 0.5% First three digits for significant figure and 4th digit for number of zeros Fig. 8 Value = 10 K For further marking information, please see special data sheet "Chip resistors marking". www.yageo.com Dec. 12, 2018 V.10 Product specification Chip Resistor Surface Mount SERIES RC_L 4 11 0075 to 2512 TAPING CODE & POWER Type Power, W (P70) Coding 07 0075 0100 0201 0402 0603 0805 1/50 1/32 1/20 1/16 1/10 1/8 7W 1/8 1/5 1/4 Type Power, W (P70) Coding 07 1206 1210 1218 2010 2512 1/4 1/2 1 3/4 1 CONSTRUCTION The resistor is constructed on top of a high-grade ceramic body. Internal metal electrodes are added on each end to make the contacts to the thick film resistive element. The composition of the resistive element is a noble metal imbedded into a glass and covered by a second glass to prevent environmental influences. The resistor is laser trimmed to the rated resistance value. The resistor is covered with a protective epoxy coat, finally the two external terminations (matte tin on Ni-barrier) are added, as shown in Fig.9. 7W 1/2 2 Outlines For dimensions, please refer to Table 1 9 Fig. 9 Chip resistor outlines DIMENSION Table 1 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) RC0075 0.300.01 0.150.01 0.130.01 0.080.03 0.080.03 RC0100 0.400.02 0.200.02 0.130.02 0.100.03 0.100.03 RC0201 0.600.03 0.300.03 0.230.03 0.100.05 0.150.05 RC0402 1.000.05 0.500.05 0.350.05 0.200.10 0.250.10 RC0603 1.600.10 0.800.10 0.450.10 0.250.15 0.250.15 RC0805 2.000.10 1.250.10 0.500.10 0.350.20 0.350.20 RC1206 3.100.10 1.600.10 0.550.10 0.450.20 0.400.20 RC1210 3.100.10 2.600.15 0.550.10 0.450.15 0.500.20 RC1218 3.100.10 4.600.10 0.550.10 0.450.20 0.400.20 RC2010 5.000.10 2.500.15 0.550.10 0.450.15 0.500.20 RC2512 6.350.10 3.100.15 0.550.10 0.600.20 0.500.20 www.yageo.com Dec. 12, 2018 V.10 Product specification Chip Resistor Surface Mount RC_L SERIES 5 11 0075 to 2512 ELECTRICAL CHARACTERISTICS Table 2 CHARACTERISTICS POWER OPERATING TEMPERATURER ANGE Fig. 4 Chip resistor outlines-55 to 125 RC0075 1/50 W MAXIMUM WORKING VOLTAGE 10V MAXIMUM DIELECTRIC OVERLOAD WITHSTANDING VOLTAGE VOLTAGE 25V 25V RESISTANCE RANGE TEMPERATURE COEFFICIENT JUMPER CRITERIA Rated Current 5% (E24) 10R<100 10R1M -200~+600ppm 0.5A 1% (E24/E96) 100R1M Maximum 10R1M 200ppm Current Jumper<50m RC0100 1/32 W -55 to 125 15V 30V 30V 1.0A 5% (E24) 1R<10 1R22M -200~+600ppm 0.5A 1% (E24/E96) 10 R < 100: Maximum 1R10M 300ppm/C Current 0.5% (E24/E96) 100 R 10M: 1.0A 33R470K Rated Current 200ppm/C Jumper<50m 10M< R 22M: 250ppm/C RC0201 1/20 W -55 to 125 25V 50V 50V 5% (E24) 1R10 Rated Current 1R10M -100~+350ppm 0.5A 1% (E24/E96) 1095% covered) No visible damage No visible damage dry heat 2nd step: leadfree solder bath at 245 3C Dipping time: 3 0.5 seconds -Leaching J-STD-002 test D Leadfree solder ,260C, 30 seconds immersion time No visible damage -Resistance to Soldering Heat MIL-STD-202 Method 210F IEC 60115-1 4.18 Condition B, no pre-heat of samples 0075: (3%+50m) <50m for jumper 01005: (1% +50m) < 50mf or jumper Others: Leadfree solder, 260C 5C, 10 1 seconds immersion time Procedure 2 for SMD: devices fluxed and cleaned with isopropanol (0.5% +50m) for B/D/F tol. (1% +50m) for J tol. <50mR for jumper No visible damage www.yageo.com Dec. 12, 2018 V.10 Product specification Chip Resistor Surface Mount RC_L SERIES 11 11 0075 to 2512 REVISION HISTORY REVISION DATE Version 10 TYPE Dec. 12, 2018 CHANGE NOTIFICATION - POWER TOLERANCE - Updated 0075RESISTANCE dimensions RANGE 1/10W, 3/10W, 2/5W, 1/2W Version 90603 Mar. 06, 2018 1/5W, 0805 July 10, 2017 1206 Version 8 Version 7 1/8W, 1/4W, 1/3W, 1/2W 1/4W, 1/2W 1W Mar.1/2W, 7, 2017 The resistors are constructed using outstanding TCR level Version 6 Feb.15, 2017 material, which makes Yageo PF resistors excellent for current in battery Version 5 Oct.sensing 06, 2016application charger circuit & DC-DC converter. Version 4 Jan. 22, 2016 The composition of the resistive PF 2010 material is adjusted to give the Version 3 Dec.approximate 24, 2015 - required resistance and is covered with a protective coating, Version 2 Jul. 23, 2015 which - printed with the resistance value. Finally, the three external Version 1 Jan. 21, 2015 - (Ni / matte Tin) are terminations added, as shown in Fig. 4. Version 0 Dec. 15, 2014 2512 4527 DESCRIPTION - TEMPERATURE COEFFICIENT OF RESISTANCE 5 m < 100 m ~ RC2512 based on marking - Add 0.5%/1% marking ruleRfor RC0603 datasheet 4 m R < 100 m - Add "3W" part number coding for 13" Reel & double power 3 m R < 100 m - Add 10" packing - Extend RC0805 and RC1206 resistance range to 100Mohm - Description: Update Dimension of I2 of RC2512 (2W) - Update resistance range 1% 5 m R < 100 m 2% - Updated test and requirements 5% 75 ppm/C - Updated test and requirements - ESD Safe Reel update - First issue of this specification 1W, 2W 1 m R < 100 m 3W 1 m R 50 m 2W, 3W, 5W 6 m R < 1 NOTE: 1. PLEASE CONTACT WITH SALES OFFICES, DISTRIBUTORS AND REPRESENTATIVES IN YOUR REGION BEFORE ORDERING " Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any product change will be announced by PCN." www.yageo.com Dec. 12, 2018 V.10