CPC1706 Single-Pole, Normally Open 4-Pin OptoMOS(R) DC Power SIP Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Rating 60 4 0.09 Description Units VP ADC IXYS Integrated Circuits Division and IXYS have combined to bring OptoMOS(R) technology, reliability, and compact size to a new family of high power solid state relays. The CPC1706, a DC-switching, normally open (1-Form-A) Solid State Relay, is part of that family. Features * * * * * * Handle Load Currents Up to 4ADC 2500Vrms Input/Output Isolation Power SIP Package High Reliability No Moving Parts Low Drive Power Requirements (TTL/CMOS Compatible) * Arc-Free With No Snubbing Circuits * No EMI/RFI Generation * Machine Insertable, Wave Solderable Employing optically coupled MOSFET technology, the CPC1706 provides 2500Vrms of input to output isolation. The relay output is constructed with efficient MOSFET switches that use IXYS Integrated Circuits Division's patented OptoMOS architecture. The input, a highly efficient GaAlAS infrared LED, controls the optically coupled output. The combination of low on-resistance and high load current handling capability makes this relay suitable for a variety of high performance switching applications. Applications * * * * * Industrial Controls Motor Control Robotics Medical Equipment--Patient/Equipment Isolation Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * IC Equipment * Home Appliances Approvals * UL 508 Certified Component: File E69938 * CSA Certified Component: Certificate 1172007 Ordering Information Part # CPC1706Y Description 4-Pin (8-Pin Body) Power SIP Package (25 per tube) Pin Configuration Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-CPC1706-R03 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION CPC1706 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Min -40 -40 Max 60 5 50 1 150 1600 2500 +85 +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly 3.33 mW / C Derate linearly 16.667 mW / C 2 Electrical Characteristics @ 25C Parameter Output Characteristics Load Current, Continuous Peak Load Current On-Resistance 1 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Input/Output Characteristics Capacitance Input/Output 1 Conditions Symbol Min Typ Max Units IF=5mA, Free air IF=5mA, t=10ms IF=5mA, IL=1A IF=0mA, VL=60VP IL ILPK RON ILEAK - 0.07 - 4 9 0.09 1 ADC A A IF=0mA, VL=50V, f=1MHz ton toff COUT - 0.5 0.085 75 5 2 - IL=1A IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 1.4 1.2 - 5 1.4 10 mA mA V A f=1MHz CI/O - 2 - pF Conditions Symbol Min Typ Max Units - RJC - 1.5 - C/W IF=5mA, VL=10V ms pF Measurement taken within 1 second of on-time. Thermal Characteristics Parameter Thermal Resistance (junction to case) 2 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC1706 PERFORMANCE DATA* Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 20 15 10 15 10 5 0.290 0.375 0.460 0.545 0.630 0.715 0.800 Turn-On Time (ms) 0.075 0.080 0.085 0.090 0.095 0.100 0.105 Turn-Off Time (ms) Typical IF for Switch Operation (N=50, IL=1A, TA=25C) Typical On-Resistance Distribution (N=50, IF=5mA, IL=1A, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) Device Count (N) 15 10 5 20 Device Count (N) 20 0 15 10 5 1.2 1.4 1.5 1.6 LED Current (mA) 1.8 1.5 1000 1.4 1.3 IF=50mA IF=20mA IF=10mA IF=5mA Typical Turn-On vs. LED Forward Current (IL=75mA) 600 400 0 20 40 60 Temperature (C) 80 100 Typical IF for Switch Operation vs. Temperature (IL=1A) 650 Turn-On Time (Ps) 1.7 1.6 1.5 1.4 10 20 30 40 LED Forward Current (mA) 100 95 90 0 20 40 60 Temperature (C) 80 100 Typical Turn-On vs. Temperature (IL=75mA) 130 IF=5mA 550 450 400 350 IF=10mA 300 10 20 30 40 LED Forward Current (mA) Typical Turn-Off vs. Temperature (IL=75mA) 110 100 IF=10mA 90 IF=5mA 80 -20 0 20 40 60 Temperature (C) 50 120 500 200 -40 0 50 250 -20 84.0 85 0 600 1.3 -40 82.0 82.5 83.0 83.5 Blocking Voltage (VP) 200 Turn-Off Time (Ps) 1.8 800 81.5 Typical Turn-Off vs. LED Forward Current (IL=75mA) 105 0 -20 5 81.0 Turn-Off Time (Ps) 1200 Turn-On Time (Ps) 1.6 1.1 -40 10 0.058 0.062 0.066 0.070 0.074 0.078 0.082 On-Resistance (:) Typical LED Forward Voltage Drop vs. Temperature 1.2 15 0 0 1.1 LED Forward Voltage (V) 10 1.235 1.240 1.245 1.250 1.255 1.260 1.265 LED Forward Voltage (V) 20 LED Forward Current (mA) 15 0 0 0 Device Count (N) 20 5 5 Typical Turn-Off Time (N=50, IF=5mA, IL=75mA, TA=25C) 20 Device Count (N) 25 Device Count (N) 25 Device Count (N) 30 Typical Turn-On Time (N=50, IF=5mA, IL=75mA, TA=25C) 80 100 70 -40 -20 0 20 40 60 Temperature (C) 80 100 * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION CPC1706 PERFORMANCE DATA* 0.10 DC-Only On-Resistance vs. Temperature (IF=5mA, IL=1A) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) 4.0 Maximum Load Current vs. Temperature 4.5 0.08 0.07 0.06 4.0 Load Current (A) 0.09 Load Current (A) On-Resistance (:) 3.5 3.0 2.5 2.0 1.5 1.0 0 20 40 60 Temperature (C) 80 0.0 0.00 100 Blocking Voltage vs. Temperature 70 Leakage Current (nA) Blocking Voltage (VP) 86 84 82 80 78 76 -40 -20 0 20 40 60 Temperature (C) 80 100 0.10 0.15 0.20 Load Voltage (V) 0.25 -40 0.30 Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=60V) -20 0 20 40 60 Temperature (C) 80 100 Output Capacitance vs. Load Voltage 500 60 50 40 30 20 10 0 -40 2.5 1.5 0.05 Output Capacitance (pF) -20 3.0 2.0 0.5 0.05 -40 3.5 450 400 350 300 250 200 150 100 50 -20 0 20 40 60 Temperature (C) 80 100 10s 100s 0 10 20 30 40 Load Voltage (V) 50 60 Energy Rating Curve Load Current (A) 16 12 8 4 0 10Ps 100Ps 1ms 10ms 100ms Time 1s * The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R03 INTEGRATED CIRCUITS DIVISION CPC1706 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating CPC1706Y MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time CPC1706Y 245C for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION CPC1706 MECHANICAL DIMENSIONS 21.0820.381 (0.8300.015) PCB Hole Pattern 3.3020.051 (0.1300.002) 10.1600.127 (0.4000.005) 1.75 (0.069) 7 TYP 4 Places Pin 1 1.778 (0.070) 0.7620.076 (0.0300.003) 2.5400.127 (0.1000.005) 4.5720.127 (0.1800.005) 10.1600.127 (0.4000.005) 5.0800.127 (0.2000.005) 1.6510.102 (0.0650.004) 5.080 (0.200) 10.160 (0.400) 1.0160.127 (0.0400.005) Pin 1 1.150 DIA. x4 (0.045 DIA. x4) 2.540 (0.100) 0.3810.013 (0.0150.0005) 1.778 (0.070) 7 TYP 4 Places Dimensions mm (inches) For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division's Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 6 Specification: DS-CPC1706-R03 (c)Copyright 2012, IXYS Integrated Circuits Division OptoMOS(R) is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/16/2012