Product Bulletin OPB460 August 1996 (SP, OPTEK Photologic Slotted Optical Switches Package N sant Types OPB460, OPB470 Series Package T Package P Features Choice of mounting configuration Choice of aperture Choice of output configuration Choice of opaque or IR transmissive shell material Data rates to 250 kBaud 0.320" (8.13 mm) lead spacing for PC board mount Low power consumption Description The OPB460 and OPB470 series of Phototogic Photo Integrated Circuit Switches provide optimum flexibility for the design engineer. Building from a standard housing with a 0.125" (3.18 mm) wide slot, the user can specify (1) type and polarity of TTL output, (2) discrete shell material, (3) aperture width, and (4) type of mounting configuration. These devices exhibit stable performance over supply voltages ranging from 4.5 V to 16.0 V and may be specified as buffered or inverted with 10 kQ pull-up or open collector output. All are TTL/LSTTL compatible and can drive up to 10 TTL loads. Replaces/Upgrades OPB960, OPB970 Series. Absolute Maximum Ratings (Ta = 25 C unless otherwise noted) Supply Voltage, Vcc (Not to exceed 3Sec.).. 0... eee eee 18V Storage Temperature Range .... 0.0.0.0... cece cece ene eee -40 C to +85 C Operating Temperature Range .......... 0.0.0 cece cence aes -40 C to +85 C Lead Soldering Temperature [1/16 inch (1.6 mm) from case for 5 sec. with soldering HOM]. oo cece cn eee nee e beeen eee beet enneteenetenaas 240 Cc) Input Diode Power Dissipation... 0.0.0.0... 0.02 cece cece nee 100 mw) Output Photologic Power Dissipation............0.. 00.0.0 cee ees 90 mw) Total Device Power Dissipation. ..............00 cece eee tence eee 190 mw Voltage at Output Lead (Open Collector Output)............00...0..00 02 eee 35 V Diode Forward D.C. Current... ....0.0.00. 002 cee eee eee 40 mA Diode Reverse D.C. Voltage ... 2... eee eee ree et tenes 2Vv Notes: (1) RMA flux is recommended. Duration can be extended to 10 sec. max. when flow soldering. (2) Derate linearly 1.67 mW? C above 25 C. (3) Derate linearly 1.50 mW? C above 25 C. (4) Derate linearly 3.17 mW/ C above 25 C. (5) The OPB460/OPB470 series are terminated with .020" square leads designed for printed elrcuit board mounting. (6) Normal application would be with light source blocked, simulated by IF = 0 mA. (7) Ali parameters tested using pulse technique. Housing All housings are an opaque grade of injection-molded plastic to minimize the assembly's sensitivity to ambient radiation, both visible and near-infrared. Discrete shells (exposed on the parallel faces inside the device throat) are either IR transmissive plastic for applications where aperture contamination may occur or opaque plastic for maximum protection against ambient light. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 12-16 (972) 323-2200 Fax (072) 523-2306Types OPB460, OPB470 Series Package N Package T EACSBE LES Beton ERE aw cee * 130 (3.30) ie (oo. a 755 _(19.18) 4130_(3.30) 3 "745 (16.32) pe C5} OPTICAL & = ma YY , 0 fe cerica 1} | g) Fo (e103 >} 7) T -240 (6.10) s 330 (3.30) T t 1120 (3.05) -A@S (12.87) ; 5 473 (12.07) 433_(12.57) . 12. 7) wstie.07) [7 12 3.2) -~ yrs 11S (2.92) | 110 (2.78) Now {| 20 & 79) Wom 5 (9.02) 2938 C1105) en 41S ae 54) { 1 i ry 105 (2.87) -425 (10.60) MIN S wn LEAD SPACE DIMENSIONS CONTROLLED AT HOUSING SUNFACE ONLY DIMENSIONS ARE IN INCHES (HILL HE TERS) .323 (6.28) 315 (6.00) A LEAD SPACE DIMENSIONS CONTROLLED AT HOUSING SURFACE ONLY OIMENSIONS ARE IN INCHES (MILL INETERS} 777 8.72 _737 (18.72) Package L Te | _/BeR er beneon Package P bh F782 id SBANTEERETOP 022 (15.00) _ 30 .30 BEER |_ 922 (15.00), )/ DENTES SENSOR -8t2 (15.80) 1 a Bla (15.54) | 4_{ a 4 | 0 a 260 (6.60) one AD) "20 (8.10 "2a0 (6.40) Tt 4 orrica, & 9 1#30.(3.30) i 120 (3.08) 130 (3.30) | 130. (3.30) 2 PLACES: 120 (3.05) 120 (3.05) a 0297) +} 295. 112.57) 7473 (12.07 crien, (475 (12.07) OPTICAL 130 (3.30) 130 (3.30) L f v1IS (2.92 wa | 135 (2.92) i | | "110 (2.78) wom sez bo.00) Lf] 110 (2.78) nm 438 (11.05) T 235 {2.029 335 (e581) 38 (i105) -4i5 3 ~335 (0.51) ANS (10.54) | orm cy 105 (2.67) | OMS (2.41) +425, (10.80) | DIMENSION CONTROLLED AT HOUSING SURFACE OMLY GIMENSIONS ARE IN INCHES (MILLIMETERS) , Inc. .425 (10,60) Min | 105 (2.67) 095 (2.41) 325 (8.26) A -3ES (B.00) 080 (2.03) 070 (1.78) GND LEAD SPACE GIMENSIONS CONTROLED AY HOUSING SURFACE ONLY DIMENSIONS ARE IN INCHES (MILLIMETERS) 1215 W. Crosby Road Catrottton, Texas 75006 (972)323-2200 Fax (972)323-2306 12-17Types OPB460, OPB470 "55" Series (SP, OPTEK Electrical Characteristics (Ta = -40 C to +85 C unless otherwise noted) SYMBOL | PARAMETER MIN | TYP | MAX|UNITS/ TEST CONDITIONS Input Diode . Ve Forward Voltage 1.7 Vs jit =20 mA, Ta = 25C lA Reverse Current 100 | pA |VR=2V,Ta=25C Output Photologic Sensor Voc Operating D.C. Supply Voltage 45 | 16.0 Vv lec Low Level Supply Current: Buffered with 10 k pull-up 75 | mA \Voc=16V, Ip =0ma Buffered Open-Collector Output Inverted with 10 k pull-up 75 mA |Vcc=16V, IF =4mA Inverted Open-Collector Output IccH High Level Supply Current: Buffered with 10 k pull-up 7.5 mA {Vcc =16V, ir =4mA Buffered Open-Collector Output Inverted with 10 k pull-up 75 | mA |Vcc=16V, Ip =0 maA Inverted Open-Collector Output VoL Low Level Output Voltage: Buffered with 10 k pull-up 0.4 V|Vec = 4.5 V, lo. = 16 mA Buffered Open-Collector Output Ir =0mA Inverted with 10 k pull-up 0.4 VV s|Voc = 4.5 V, lo. = 16 mA Inverted Open-Collector Output lF=4mA Vou High Level Output Voltage: Buffered with 10 k pull-up Vec-1.5 V_s|Vec = 4.5 V to 16 V, lon = -800 pA lF=4mA Inverted with 10 k pull-up Vec-1.5 V_|Voec = 4.5 V to 16 V, lon = -800 pA Ir =0 ma loH High Level! Output Current: Buffered Open-Collector Output 10 pA |Voc = 16 V, Vou = 30V, IF=4 mA, Ta = 25C Inverted Open-Collector Output 10 pA |Vcc = 16 V, Von = 30 V, Ir =O mA), Ta = 25C IF(+) LED Positive-Going Threshold Current 4 mA |Vcc=5V, Ta=25C le(+)/le(-) | Hysteresis 1.2 Veco =5V tr, te Output Rise Time, Output Fall Time 50 ns |Voc=5V,Ta=25C IF =Oor4mA tei, tpHL | Propagation Delay Low-High & High-Low 3.0 HS a = 30 pF o5V Le = Optek Technology, Inc. 1215 W. Crosby Road Carroliton, Texas 75006 (972) 323-2200 Fax (972) 323-2396 12-18Types OPB460, OPB470 51 Series Electrical Characteristics (Ta = -40 C to +85 C unless otherwise noted) SYMBOL | PARAMETER | MIN | TYP |MAX|UNITS| TEST CONDITIONS Input Diode Ve Forward Voltage 1.7 Vv {lp = 20 mA, Ta = 25C IR Reverse Current 100 | pA |Va=2V,TaA= 25C Output Photologic Sensor Vec Operating D.C. Supply Voltage 4.5 16.0 | Vv lect Low Level Supply Current: | Buffered with 10 k pul-up 75, mA |Veo=16V, IF=0mA Buffered Open-Collector Output Inverted with 10 k pull-up | 75 | mA |Vco=16V,lF=8mA Inverted Open-Collector Output locH High Level Supply Current: Butfered with 10 k pull-up 75 mA |Vcc=16V, IF=8mA Buffered Open-Collector Output ' {Inverted with 10 k pull-up 75 | mA |Voc= 16 V, Ip =0 ma) Inverted Open-Collector Output VoL Low Level Output Voltage: Buffered with 10 k pull-up 0.4 VV |Vec = 4.5 V, lo. = 16 mA Buffered Open-Collector Output Ir =0 mA) Inverted with 10 k pull-up 0.4 Vi |Vec = 4.5 V, lo. = 16 mA Inverted Open-Collector Output lF=8mA Vou High Level Output Voltage: Buffered with 10 k pull-up Voc-1.5 Vs |Vec = 4.5 V to 16 V, low = -800 pA | lF=8mA Inverted with 10 k pull-up Vec-1.5 | V [Vcc = 4.5 V to 16 V, lon = -800 pA ip =0 mA) lou High Level Output Current: j Butfered Open-Coltector Output 10 pA Vcc = 16 V, Vou =30V, Ip =8 mA, Ta = 25C Inverted Open-Collector Output 10 BA Voc =16V, Von =30V, te = 0 mA!, Ta = 25C IF(+) LED Positive-Going Threshold Current 8 mA |Vcc =5 V, Ta =25C IF(+)/lF(-)_ |Hysteresis 1.2 Vec =5V | tr, te Output Rise Time, Output Fall Time 50 ns [Voc =5V,Ta=25C le =Qor8mA tPLH, tpHL | Propagation Delay Low-High & High-Low 3.0 ps Ri = 300 2 to SV | | C. = 50 pF | Qptek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972)323-2200 Fax (972)323-2396 12-19Types OPB460, OPB470 11 Series &),OPTEK Electrical Characteristics (Ta = -40 C to +85 C unless otherwise noted) SYMBOL | PARAMETER | MIN | TYP | MAX/UNITS| TEST CONDITIONS Input Diode Ve Forward Voltage 1.7 Vs lip =20 mA, Ta = 25C in Reverse Current 100 | pA |VR=2V,Ta=25C | Output Photologic Sensor Voc Operating D.C. Supply Voltage 45 16.0 Vv lect Low Level Supply Current: Buffered with 10 k pull-up 75 | mA |Vec=16V, ip =0mA Buffered Open-Collector Output Inverted with 10 k pull-up 75 mA |Vcc=16V,lF=12mA Inverted Open-Collector Output lecH High Level Supply Current: Buffered with 10 k pull-up 7.5 | mA |Voc=16V, IrF=12mA Buffered Open-Collector Output inverted with 10 k pull-up 75 | mA |Voo=16V, Ip =0mA Inverted Open-Collector Output Vow Low Level Output Voltage: Buffered with 10 k pull-up 0.4 Vo |Veco = 4.5 V, lo. = 16 mA Buffered Open-Collector Output lF=OmA Inverted with 10 k pull-up 0.4 Vo \Veco = 4.5 V, lo. = 16 mA inverted Open-Collector Output Ir = 12 ma Vou High Level! Output Voltage: Buffered with 10 k pull-up Vec-1.5 V_s|Vec = 4.5 V to 16 V, low = -800 pA IF =12 mA Inverted with 10 k pull-up Vec-1.5 Vico = 4.5 V to 16 V, lon = -800 pA Ir =0 mA) lou High Level Output Current: Buffered Open-Collector Output 10 pA |Voc = 16 V, Vou = 30 V, Ip = 12 MA, Ta = 25C inverted Open-Collector Output 10 HA |Voc= 16 V, Von = 30V, IF =O mA), Ta = 25C te(+) LED Positive-Going Threshold Current 12 mA |Vcc=5V, TA=25C Ir(+)Ar(-) |Hysteresis 1.2 Veco =5V tr, te Output Rise Time, Output Fall Time 50 ns |Voc =5 V, Ta = 25C lp =Oor12mA tL, tpHL {Propagation Delay Low-High & High-Low 3.0 Ri = 300 2 to 5 V HS CL =50 pF Optek Technology, Inc. 1215 W. Crosby Road Carrollton, Texas 75006 (972) 323-2200 Fax (972) 323-2396 12-20Types OPB460, OPB470 Series PART NUMBER GUIDE OPB4XXXXX Optek Assembly Photologic Photo Integrated Circuit Sensor Family Discrete Shell Material Designation 6 - Base Mount IR Transmissive Plastic Discrete Shell PC Mountable Leads 7 - Base Mount Opaque Plastic Discrete Shell Aperture Width In Front of Sensor 5 =0.050" 1= 0.010" Aperture Width In Front of Emitter 5=0.050" 1=0.010" Mounting Configurations T - Both Mounting Tabs N - No Mounting Tabs L - Single Mounting Tab Emitter Side P - Single Mounting Tab Photologic Side PC Mountable Leads Electrical Specification Variations 0 - Buffered with 10 k pull-up 1 - Buffered Open-Collector Output 2 - Inverted with 10 k pull-up 3 - Inverted Open-Collector Output Schematics OPB460/470 Butter with Pull-up Resistor OPB462/472 inverter with Pull-up Resistor A K - : Light On - Output High Light On - Output Low OPB461/471 OPB463/473 Buttfer/Open-Collector Inverter/Open-Collector A $$$ $$OVen A Nee [wees OUT O OUT a K OGND K OGND Light On - Output High Carrollton, Texas 75006 12-21 1215 W. Crosby Road t Optek Technology. inc. (972)323-2200 Fax (972)303- -2396