www.lumberg.com 06/2013
Rundsteckverbinder mit Schraubverschluss nach IEC 61076-2-106 und AISG-Spezifikation, IP 68
Circular connectors with threaded joint acc. to IEC 61076-2-106 and AISG specification, IP 68
Connecteurs circulaires avec verrouillage à vis suivant CEI 61076-2-106 et spécification AISG, IP 68
Verpackung: im Karton
Packaging: in a cardboard box
Emballage: dans un carton
0308 0308
Bestellbezeichnung
Designation
Désignation
0308 03 3 50 0,75 5 250 2 > 10 ~ 2
0308 04 4 50 0,75 5 250 2 > 10 ~ 2
0308 05 5 50 0,75 5 60 1 > 10 ~ 3
0308 05-1 5 50 0,75 5 250 2 > 10 ~ 2
0308 06 6 50 0,75 5 250 2 > 10 ~ 2
0308 07 7 50 0,75 5 250 2 > 10 ~ 2
0308 07-1 7 50 0,75 5 60 1 > 10 ~ 3
0308 08 8 50 0,75 5 60 1 > 10 ~ 3
0308 08-1 8 50 0,75 5 60 1 > 10 ~ 3
0308 12 12 50 0,25 3 60 1 > 10 ~ 3
0308 14 14 50 0,25 3 60 1 > 10 ~ 3
0308-1 08-1 8 50 0,75 5 60 1 > 10 ~ 3
Polzahl
Poles
Pôles
Verpackungseinheit (VE)
Package unit (PU)
Unité d’emballage (UE)
Anschlussquerschnitt
Wire section
Section de racc. de fil
Bemessungsstrom
Rated current
Courant assigné
Bemessungsspannung4
Rated voltage4
Tension assignée4
Prüfspannung
Test voltage
Tension d’éssai
Isolationswiderstand
Insulation resistance
Résistance d’isolement
Kontaktkapazität
Contact capacitance
Capacité de
contact
mm² A V AC kV AC eff. GΩpF
Flange chassis socket acc. to IEC 61076-2-106, IP 68, with
threaded joint and solder terminals
03...-1: also complies with AISG specification
1. Temperature range -40 °C/+85 °C
2. Materials
Insulating body PA GF
Contact bush 3 to 8 poles CuZn, silver and flash gold-plated
Contact bush 12 to 14 poles CuZn, pre-nickeled and gold-plated
Housing Zn diecast, nickel-plated
Gasket EPDM
3. Mechanical data
Insertion force/contact 3–8 poles1< 5.0 N
Insertion force/contact 12–14 poles2< 5.0 N
Withdrawal force/contact 3–8 poles1> 1.2 N
Withdrawal force/cont. 12–14 poles2> 0.9 N
Mating with plugs 0331, 0332..., 0365
plugs according to IEC 61076-2-106
and IEC 60130-9
Protection3IP 68
4. Electrical data
Contact resistance ≤5 mΩ
For further information see table
1measured with a polished steel pin, nominal thickness 1.5 mm
2measured with a polished steel pin, nominal thickness 1.0 mm
3according to DIN EN 60529, only in locked position with a proper counter
part, IP X8 requirements under agreement between user and manufac-
turer
4according to VDE 0110/IEC 60664
Embase femelle suivant CEI 61076-2-106, IP 68, avec ver-
rouillage à vis et connexion par soudure
03...-1: aussi conforme à la spécification AISG
1. Température d’utilisation -40 °C/+85 °C
2. Matériaux
Corps isolant PA GF
Prise de contact 3 à 8 pôles CuZn, argenté et doré flash
Prise de contact 12 à 14 pôles CuZn, sous-nickelé et doré
Boîtier Zn moulé sous pression, nickelé
Joint d’étanchéité EPDM
3. Caractéristiques mécaniques
Force d’insertion/contact 3–8 pôles1< 5,0 N
Force d’insertion/cont. 12–14 pôles2< 5,0 N
Force de séparation/cont. 3–8
pôles
1
> 1,2 N
Force de séparation/cont. 12–14 pôles2
> 0,9 N
Raccordement avec connecteurs mâles 0331, 0332..., 0365
connecteurs mâles suivant
CEI 61076-2-106 et CEI 60130-9
Protection3IP 68
4. Caractéristiques électriques
Résistance de contact ≤5 mΩ
Pour plus de détails, voir tableau
1mesurée avec une tige d’acier poli, épaisseur nominale 1,5 mm
2mesurée avec une tige d’acier poli, épaisseur nominale 1,0 mm
3suivant DIN EN 60529, uniquement à l’état verrouillé avec un propre
pendant, exigences IP X8 après entente entre utilisateur et fabricant
4suivant VDE 0110/CEI 60664
0308-1 0308-1